GHA: Update actions/upload-artifact to v4

Builds on AppVeyor (VS2019) started to fail
because of the Python version/distutils

.appveyor/epics-base-3.yml

@@ -1,5 +1,12 @@
-# .appveyor.yml for use with EPICS Base ci-scripts
-# (see: https://github.com/epics-base/ci-scripts)
+# Appveyor configuration file for EPICS Base 3.15 builds
+# (see also https://github.com/epics-base/ci-scripts)
+
+# branches to build
+branches:
+  # whitelist
+  only:
+    - 3.15
+    - /R3\.15\.\d+.*/
 
 # Version format
 version: base-{branch}-{build}
@@ -29,9 +36,10 @@ clone_depth: 5
 skip_commits:
   files:
     - 'documentation/*'
+    - 'startup/*'
+    - '.github/*'
     - '**/*.html'
     - '**/*.md'
-    - '.travis.yml'
 
 #---------------------------------#
 #   build matrix configuration    #
@@ -77,14 +85,17 @@ matrix:
     CMP: vs2012
   - platform: x64
     CMP: vs2010
-  - platform: x64
-    CMP: vs2008
   # Exclude more jobs to reduce build time
   # Skip 32-bit for "middle-aged" compilers
   - platform: x86
     CMP: vs2017
   - platform: x86
     CMP: vs2015
+  # MinGW debug builds use the same libraries, unlike VS
+  - configuration: dynamic-debug
+    CMP: gcc
+  - configuration: static-debug
+    CMP: gcc
 
 #---------------------------------#
 #     building & testing          #

.ci-local/travis-fixup.sh

@@ -1,19 +0,0 @@
-#!/bin/sh
-set -e -u -x
-
-env|grep TRAVIS
-
-[ "$TRAVIS_OS_NAME" = "linux" ] || exit 0
-
-# Ensure there is an interface with a (correct) broadcast address
-# eg. 'trusty' VMs have interface broadcast address mis-configured
-# (why oh why do people insist on setting this explicitly?)
-
-sudo ip tuntap add dev tap42 mode tap
-
-sudo ip addr add 192.168.240.1/24 broadcast + dev tap42
-
-sudo ip link set dev tap42 up
-
-# note that this device will be UP but not RUNNING
-# so java will see it as not UP since java confuses UP and RUNNING

.gitattributes

@@ -1,5 +0,0 @@
-.ci/          export-ignore
-.tools/       export-ignore
-.appveyor.yml export-ignore
-.travis.yml   export-ignore
-README        export-subst

.github/workflows/ci-scripts-build.yml

@@ -0,0 +1,143 @@
+# .github/workflows/ci-scripts-build.yml for use with EPICS Base ci-scripts
+# (see: https://github.com/epics-base/ci-scripts)
+
+# This is YAML - indentation levels are crucial
+
+# Workflow name, shared by all branches
+
+name: Base
+
+# Trigger on pushes and PRs to any branch
+on:
+  push:
+    paths-ignore:
+      - 'documentation/*'
+      - 'startup/*'
+      - '.appveyor/*'
+      - '**/*.html'
+      - '**/*.md'
+  pull_request:
+    paths-ignore:
+      - 'documentation/*'
+      - 'startup/*'
+      - '.appveyor/*'
+      - '**/*.html'
+      - '**/*.md'
+
+env:
+    SETUP_PATH: .ci-local:.ci
+    BASE: SELF
+    EPICS_TEST_IMPRECISE_TIMING: YES
+
+jobs:
+  build-base:
+    name: ${{ matrix.name }}
+    runs-on: ${{ matrix.os }}
+    # Set environment variables from matrix parameters
+    env:
+      CMP: ${{ matrix.cmp }}
+      BCFG: ${{ matrix.configuration }}
+      WINE: ${{ matrix.wine }}
+      RTEMS: ${{ matrix.rtems }}
+      EXTRA: ${{ matrix.extra }}
+    strategy:
+      fail-fast: false
+      matrix:
+        # Job names also name artifacts, character limitations apply
+        include:
+          - os: ubuntu-20.04
+            cmp: gcc
+            configuration: default
+            wine: "64"
+            name: "Ub-20 gcc-9 + MinGW"
+
+          - os: ubuntu-20.04
+            cmp: gcc
+            configuration: static
+            wine: "64"
+            name: "Ub-20 gcc-9 + MinGW, static"
+
+          - os: ubuntu-20.04
+            cmp: gcc
+            configuration: static
+            extra: "CMD_CXXFLAGS=-std=c++11"
+            name: "Ub-20 gcc-9 C++11, static"
+
+          - os: ubuntu-20.04
+            cmp: clang
+            configuration: default
+            extra: "CMD_CXXFLAGS=-std=c++11"
+            name: "Ub-20 clang-10 C++11"
+
+          - os: ubuntu-20.04
+            cmp: gcc
+            configuration: default
+            rtems: "4.10"
+            name: "Ub-20 gcc-9 + RT-4.10"
+
+          - os: ubuntu-20.04
+            cmp: gcc
+            configuration: default
+            rtems: "4.9"
+            name: "Ub-20 gcc-9 + RT-4.9"
+
+          - os: ubuntu-20.04
+            cmp: gcc-8
+            utoolchain: true
+            configuration: default
+            name: "Ub-20 gcc-8"
+
+          - os: ubuntu-20.04
+            cmp: clang
+            configuration: default
+            name: "Ub-20 clang-10"
+
+          - os: macos-latest
+            cmp: clang
+            configuration: default
+            name: "MacOS clang-12"
+
+          - os: windows-2019
+            cmp: vs2019
+            configuration: default
+            name: "Win2019 MSC-19"
+
+          - os: windows-2019
+            cmp: vs2019
+            configuration: static
+            name: "Win2019 MSC-19, static"
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        submodules: true
+    - name: "apt-get install"
+      run: |
+        sudo apt-get update
+        sudo apt-get -y install qemu-system-x86 g++-mingw-w64-x86-64 gdb
+      if: runner.os == 'Linux'
+    - name: "apt-get install ${{ matrix.cmp }}"
+      run: |
+        export GCC_NAME="${{ matrix.cmp }}"
+        sudo apt-get update
+        sudo apt-get -y install software-properties-common
+        sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
+        sudo apt-get update
+        sudo apt-get -y install g++-${GCC_NAME#gcc-}
+      if: matrix.utoolchain
+    - name: Prepare and compile dependencies
+      run: python .ci/cue.py prepare
+    - name: Build main module
+      run: python .ci/cue.py build
+    - name: Run main module tests
+      run: python .ci/cue.py test
+    - name: Upload tapfiles Artifact
+      if: ${{ always() }}
+      uses: actions/upload-artifact@v4
+      with:
+        name: tapfiles ${{ matrix.name }}
+        path: '**/O.*/*.tap'
+        if-no-files-found: ignore
+    - name: Collect and show test results
+      if: ${{ always() }}
+      run: python .ci/cue.py test-results

.gitignore

@@ -7,8 +7,6 @@
 /include/
 /templates/
 /configure/*.local
-/modules/RELEASE.*.local
-/modules/Makefile.local
 O.*/
 /QtC-*
 *.orig

.gitmodules

@@ -1,27 +1,3 @@
-[submodule "modules/pvData"]
-    path = modules/pvData
-    url = https://github.com/epics-base/pvDataCPP
-    branch = master
-[submodule "modules/pvAccess"]
-    path = modules/pvAccess
-    url = https://github.com/epics-base/pvAccessCPP
-    branch = master
-[submodule "modules/normativeTypes"]
-    path = modules/normativeTypes
-    url = https://github.com/epics-base/normativeTypesCPP
-    branch = master
-[submodule "modules/pvaClient"]
-    path = modules/pvaClient
-    url = https://github.com/epics-base/pvaClientCPP
-    branch = master
-[submodule "modules/pvDatabase"]
-    path = modules/pvDatabase
-    url = https://github.com/epics-base/pvDatabaseCPP
-    branch = master
-[submodule "modules/pva2pva"]
-    path = modules/pva2pva
-    url = https://github.com/epics-base/pva2pva
-    branch = master
 [submodule ".ci"]
     path = .ci
     url = https://github.com/epics-base/ci-scripts

.tools/make-tar.sh

@@ -1,168 +0,0 @@
-#!/bin/bash
-#
-# Make tar for git repo w/ one level of sub modules.
-#
-set -e
-
-die() {
-  echo "$1" >&2
-  exit 1
-}
-
-maybedie() {
-  if [ "$DEVMODE" ]; then
-    echo "Warning: $1" >&2
-  else
-    echo "Error: $1" >&2
-    exit 1
-  fi
-}
-
-usage() {
-   cat <<EOF >&2
-usage: $0 [-v] [-s] <rev> [<outfile> [<prefix>]]
-
-  <rev> may be any git revision spec. (tag, branch, or commit id).
-
-  If provided, <outfile> must end with ".tar", ".tar.gz" or ".tar.bz2".
-  If <outfile> is omitted, "base-<rev>.tar.gz" will be used.
-  If provided, <prefix> must end with "/".  If <prefix> is omitted,
-  the default is "base-<rev>/".
-
-  Options:
-
-    -v   Enable verbose prints
-    -d   Enable permissive developer mode
-EOF
-   exit 1
-}
-
-export DEVMODE=
-
-while getopts "vd" OPT
-do
-    case "$OPT" in
-    v) set -x;;
-    d) DEVMODE=1;;
-    ?) echo "Unknown option"
-       usage;;
-    esac
-done
-shift $(($OPTIND - 1))
-
-TOPREV="$1"
-FINALTAR="$2"
-PREFIX="${3:-}"
-
-[ "$TOPREV" ] || usage
-
-case "$FINALTAR" in
-"")
-  TAROPT=-z
-  FINALTAR="base-$TOPREV.tar.gz"
-  ;;
-*.tar)
-  TAROPT=""
-  ;;
-*.tar.gz)
-  TAROPT=-z
-  ;;
-*.tar.bz2)
-  TAROPT=-j
-  ;;
-*)
-  die "outfile must end with '.tar.gz' or '.tar.bz2'"
-  ;;
-esac
-
-case "$PREFIX" in
-"")
-  PREFIX="base-$TOPREV/"
-  ;;
-*/)
-  ;;
-*)
-  die "Prefix must end with '/'"
-  ;;
-esac
-
-# Check for both <tag> and R<tag>
-if ! [ `git tag -l $TOPREV` ]
-then
-  if [ `git tag -l R$TOPREV` ]
-  then
-    TOPREV="R$TOPREV"
-  else
-    maybedie "No tags exist '$TOPREV' or 'R$TOPREV'"
-  fi
-fi
-
-# temporary directory w/ automatic cleanup
-TDIR=`mktemp -d`
-trap 'rm -rf "$TDIR"' EXIT INT QUIT TERM
-
-mkdir "$TDIR"/tar
-
-echo "Exporting revision $TOPREV as $FINALTAR with prefix $PREFIX"
-
-# Use git-archive to copy files at the given revision into our temp. dir.
-# Respects 'export-exclude' in .gitattributes files.
-
-git archive --prefix=$PREFIX $TOPREV | tar -C "$TDIR"/tar -x
-
-# use ls-tree instead of submodule-foreach to capture submodule revision associated with supermodule rev.
-#
-# sub-modules appear in tree as eg.:
-#  160000 commit c3a6cfcf0dad4a4eeecf59b474710d06ff3eb68a  modules/ca
-git ls-tree -r $TOPREV | \
-  awk '/^[0-9]+ commit / && $4 != ".ci" {print $3, $4}' | \
-while read HASH MODDIR
-do
-    echo "Visiting $HASH $MODDIR"
-    if [ -e $MODDIR/.git ]
-    then
-        git -C $MODDIR archive --prefix=${PREFIX}${MODDIR}/ $HASH | tar -C "$TDIR"/tar -x
-    else
-        maybedie "  Submodule not checked out."
-    fi
-done
-
-# make a list of files copied and filter out undesirables
-
-(cd "$TDIR"/tar && find . -mindepth 1 -not -type d) > "$TDIR"/list.1
-
-# Remove leading ./ from filenames
-sed -i -e 's|^\./||' "$TDIR"/list.1
-
-# Exclude files
-sed \
-  -e '/\/\.ci\//d' \
-  -e '/\/\.ci-local\//d' \
-  -e '/\/\.tools\//d' \
-  -e '/\/jenkins\//d' \
-  -e '/\/\.git/d' \
-  -e '/\/\.hgtags$/d' \
-  -e '/\/\.cproject$/d' \
-  -e '/\/\.project$/d' \
-  -e '/\/\.travis\.yml$/d' \
-  -e '/\/\.appveyor\.yml$/d' \
-  -e '/\/\.readthedocs\.yml$/d' \
-  "$TDIR"/list.1 > "$TDIR"/list.2
-
-if ! diff -U 0 "$TDIR"/list.1 "$TDIR"/list.2
-then
-    echo "Excluding the files shown above"
-fi
-
-# Use the filtered list to build the final tar
-tar -c $TAROPT -C "$TDIR"/tar -T "$TDIR"/list.2 -f "$FINALTAR"
-
-echo "Wrote $FINALTAR"
-
-tar -t $TAROPT -f "$FINALTAR" > "$TDIR"/list.3
-
-# make sure we haven't picked up anything extra
-if ! diff -u "$TDIR"/list.2 "$TDIR"/list.3
-then
-    die "Oops! Tarfile diff against plan shown above"
-fi

.travis.yml

@@ -1,91 +0,0 @@
-# .travis.yml for use with EPICS Base ci-scripts
-# (see: https://github.com/epics-base/ci-scripts)
-
-language: cpp
-compiler: gcc
-dist: xenial
-
-cache:
-  directories:
-  - $HOME/.cache
-
-env:
-  global:
-    - SETUP_PATH=.ci-local:.ci
-    - BASE=SELF
-    - EPICS_TEST_IMPRECISE_TIMING=YES
-
-addons:
-  apt:
-    packages:
-    # for all EPICS builds
-    - libreadline6-dev
-    - libncurses5-dev
-    - perl
-    # for clang compiler
-    - clang
-    # for mingw builds (32bit and 64bit)
-    - g++-mingw-w64-i686
-    - g++-mingw-w64-x86-64
-    # for RTEMS cross builds
-    - qemu-system-x86
-  homebrew:
-    packages:
-    # for all EPICS builds
-    - bash
-    update: true
-
-install:
-  - ./.ci-local/travis-fixup.sh
-  - python .ci/cue.py prepare
-
-script:
-  - python .ci/cue.py build
-  - python .ci/cue.py test
-  - python .ci/cue.py test-results
-
-# Define build jobs
-
-jobs:
-  include:
-
-# Different configurations of default gcc and clang
-  - dist: bionic
-
-  - dist: xenial
-
-  - dist: bionic
-    env: BCFG=static EXTRA="CMD_CXXFLAGS=-std=c++11"
-
-  - dist: trusty
-    env: EXTRA="CMD_CXXFLAGS=-std=c++11"
-
-  - dist: bionic
-    compiler: clang
-
-  - compiler: clang
-
-  - dist: trusty
-    compiler: clang
-    env: BCFG=static
-
-# Cross-compilations to Windows using MinGW and WINE
-
-  - env: WINE=32 TEST=NO BCFG=static
-
-  - env: WINE=32 TEST=NO
-
-# Cross-compilation to RTEMS
-
-  - env: RTEMS=4.10
-
-  - env: RTEMS=4.9
-
-# MacOS build
-
-  - os: osx
-    env:
-      - EXTRA="CMD_CFLAGS=-mmacosx-version-min=10.7"
-      - EXTRA1="CMD_CXXFLAGS=-mmacosx-version-min=10.7 -std=c++11 -stdlib=libc++"
-      - EXTRA2="CMD_LDXFLAGS=-mmacosx-version-min=10.7 -std=c++11 -stdlib=libc++"
-    compiler: clang

Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 TOP = .
@@ -14,12 +14,8 @@ include $(TOP)/configure/CONFIG
 TOOLS = $(TOP)/src/tools
 
 DIRS += configure src
+
 src_DEPEND_DIRS = configure
 
-DIRS += test
-test_DEPEND_DIRS = src
-
-DIRS += modules
-modules_DEPEND_DIRS = src
-
 include $(TOP)/configure/RULES_TOP
+

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright UChicago Argonne LLC, as Operator of Argonne
-National Laboratory.
+Copyright (c) 1991-2003 The University of Chicago, as Operator
+of Argonne National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base is distributed subject to a Software License
-Agreement found in the file LICENSE that is included with
-this distribution.
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
 ---------------------------------------------------------
 
@@ -22,6 +22,3 @@ training materials, additional components, links to other
 websites etc. is available on the EPICS home page at
 	https://epics.anl.gov/
 
-$Format:%cD$
-$Format:%H$
-https://code.launchpad.net/epics-base

configure/CONFIG

@@ -58,9 +58,9 @@ include $(CONFIG)/CONFIG_BASE_VERSION
 include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).Common
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
 
-# Parse configure/RELEASE to find all upstream modules
 RELEASE_TOPS := $(shell $(CONVERTRELEASE) -T $(TOP) releaseTops)
 
+
 ifdef T_A
 
   #  Cross compile specific definitions

configure/CONFIG.gnuCommon

@@ -3,7 +3,8 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS Base is distributed subject to a Software License Agreement found
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
@@ -23,14 +24,9 @@ LD = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
 CPP = $(CC) -x c -E
 RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
 
-# Requires at least GCC 4.8 or LLVM (clang) 3.1
-ASAN_FLAGS_YES = -fsanitize=address
-ASAN_LDFLAGS_YES = $(ASAN_FLAGS_YES)
-
 PROF_CFLAGS_YES = -p
 GPROF_CFLAGS_YES = -pg
 CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
-CODE_CFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CFLAGS_YES = -Wall
 WARN_CFLAGS_NO = -w
 OPT_CFLAGS_YES = -O3
@@ -39,14 +35,12 @@ OPT_CFLAGS_NO = -g
 PROF_CXXFLAGS_YES = -p
 GPROF_CXXFLAGS_YES = -pg
 CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_CXXFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
 OPT_CXXFLAGS_YES = -O3
 OPT_CXXFLAGS_NO = -g
 
 CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_LDFLAGS += $(ASAN_LDFLAGS_$(ENABLE_ASAN))
 
 PIPE_CFLAGS_YES_YES = -pipe
 PIPE_CFLAGS = $(PIPE_CFLAGS_$(GCC_PIPE)_$(GNU))

configure/CONFIG_ADDONS

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #	check for add-on CFLAGS and CXXFLAGS
@@ -37,6 +37,9 @@
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY
 #    SHRLIB_LIBS   libs needed by shared LIBRARY
+#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
+#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
+#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
 #    USR_SYS_LIBS  system libs needed building libraries and prods
 #    PROD_SYS_LIBS system libs needed for building prods
 #    LIB_SYS_LIBS  system libs needed for building libraries
@@ -270,6 +273,30 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
+PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
+else
+ifdef PROD_OBJLIBS_DEFAULT
+PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
+LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
+else
+ifdef LIB_OBJLIBS_DEFAULT
+LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
+USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
+else
+ifdef USR_OBJLIBS_DEFAULT
+USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(LIB_OBJS_$(OS_CLASS))),)
 LIB_OBJS+=$(subst -nil-,,$(LIB_OBJS_$(OS_CLASS)))
 else
@@ -554,3 +581,4 @@ ifdef LIB_RCS_DEFAULT
 LIB_RCS+=$(LIB_RCS_DEFAULT)
 endif
 endif
+

configure/CONFIG_BASE

@@ -3,12 +3,13 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 #---------------------------------------------------------------
-# EPICS Base directories
+# Epics base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -17,6 +18,17 @@ ifdef T_A
   EPICS_BASE_BIN    = $(EPICS_BASE)/bin/$(T_A)
 endif
 
+#---------------------------------------------------------------
+# Epics base Ioc libraries 
+
+EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
+
+#---------------------------------------------------------------
+# Epics base Host libraries 
+
+EPICS_BASE_HOST_LIBS += cas gdd
+EPICS_BASE_HOST_LIBS += ca Com
+
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
 
@@ -27,47 +39,94 @@ ifdef BASE_TOP
   PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
 endif # BASE_TOP
 
+#---------------------------------------------------------------
+# Base c preprocessor flags
+
+BASE_CPPFLAGS = 
+
+# osithread default stack
+OSITHREAD_USE_DEFAULT_STACK = NO
+OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
+OSITHREAD_DEFAULT_STACK_FLAGS_NO =
+BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
+
 #---------------------------------------------------------------
 # Where to find the installed build tools
 #   Windows does not like commands with relative paths starting ../
-#   so TOOLS must be an absolute path, although Perl scripts are OK.
-#   FIND_TOOL is for scripts run before the build reaches src/tools.
+#   but the Perl scripts in TOP/src/tools are OK
 
 TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
-FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(EPICS_BASE)/src/tools/$(1)))
+FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# EPICS Base build tools and tool flags
+# Epics base build tools and tool flags
 
-PODTOHTML        = $(PERL) $(TOOLS)/podToHtml.pl
-CONVERTRELEASE   = $(PERL) $(call FIND_TOOL,convertRelease.pl)
-FULLPATHNAME     = $(PERL) $(TOOLS)/fullPathName.pl
-GENVERSIONHEADER = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG) $(QUESTION_FLAG)
+MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
+DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
+DBTORECORDTYPEH            = $(PERL) $(TOOLS)/dbdToRecordtypeH.pl
+DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
+REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
+CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
 
-MAKERPATH = $(PYTHON) $(TOOLS)/makeRPath.py
-
-#---------------------------------------------------------------
+#-------------------------------------------------------
 # tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
+INSTALL_QUIETLY := $(if $(filter -s,$(MFLAGS)),-q,)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
 #---------------------------------------------------------------
-# tools for making header dependencies and variable replacement
-MKMF       = $(PERL) $(TOOLS)/mkmf.pl
-REPLACEVAR = $(PERL) $(TOOLS)/replaceVAR.pl
-
-#---------------------------------------------------------------
-# tools for cleaning out unwanted files
-CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
-DEPCLEAN = $(call FIND_TOOL,depclean.pl)
+# tools for making header dependancies and variable replacement
+MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
+REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
 
 #---------------------------------------------------------------
 # Tools for testing
-TAPTOJUNIT                 = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
-PROVE                      = $(PERL) $(TOOLS)/epicsProve.pl
-PROVE.tap                  = $(PROVE) --ext .tap --exec "$(CAT)"
+TAPS_FAILED_LOG       = .taps-failed.log
+TESTS_FAILED_LOG      = .tests-failed.log
+TESTS_FAILED_PATH     = $(abspath $(TOP)/$(TESTS_FAILED_LOG))
+
+TAPTOJUNIT            = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
+PROVE                 = $(PERL) $(TOOLS)/epicsProve.pl --failures --color
+PROVE.tap             = $(PROVE) --ext .tap --exec "$(CAT)"
+TESTFAILURES          = $(PERL) $(TOOLS)/testFailures.pl
+SHOWTESTFAILURES      = $(TESTFAILURES) $(TESTS_FAILED_PATH) $(TAPS_FAILED_LOG)
+
+PROVE_FAILURE         = echo $(abspath .)>> $(TESTS_FAILED_PATH)
+TAPFILE_FAILURE       = echo $@>> $(TAPS_FAILED_LOG)
+
+#---------------------------------------------------------------
+# private versions of lex/yacc from EPICS
+EYACC = $(TOOLS)/antelope$(HOSTEXE)
+ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
+
+YACC  = $(EYACC)
+LEX   = $(ELEX)
+
+#---------------------------------------------------------------
+# Our use of msi is incompatible with older versions
+
+MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
+
+#---------------------------------------------------------------
+# External tools and tool flags - must be in path or defined in application
+
+ADL2DL ?= adl2dl
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB ?= e2db
+E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
+E2DB_FLAGS =
+
+DBST ?= dbst
+
+
 
-TEST_FAILURE_FILENAME      = .tests-failed.log
-TEST_FAILURE_FILE          = $(TOP)/$(TEST_FAILURE_FILENAME)
-PROVE_FAILURE              = echo $(abspath .)>> $(TEST_FAILURE_FILE)

configure/CONFIG_BASE_VERSION

@@ -15,48 +15,27 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# We define convenience macros for our release series to be NO or YES, so
-# Makefiles can detect 'Series X or later', or 'Series X only' like this:
-#
-#   ifdef BASE_3_14
-#       true for 3.14 or later
-#   ifdef BASE_3_15
-#       true for 3.15 or later
-#   ifdef BASE_3_16
-#       true for 3.16 or later
-#   ifdef BASE_7_0
-#       true for 7.0 or later
-#
-#   ifeq ($(BASE_3_14),YES)
-#       true for 3.14.x only
-#   ifeq ($(BASE_3_15),YES)
-#       true for 3.15.x only
-#   ifeq ($(BASE_3_16),YES)
-#       true for 3.16.x only.
-#   ifeq ($(BASE_7_0),YES)
-#       true for 7.0.x only.
-
+# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
+# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
 BASE_3_14 = NO
-BASE_3_15 = NO
-BASE_3_16 = NO
-BASE_7_0  = YES
+BASE_3_15 = YES
 
 # EPICS_VERSION must be a number >0 and <256
-EPICS_VERSION = 7
+EPICS_VERSION = 3
 
 # EPICS_REVISION must be a number >=0 and <256
-EPICS_REVISION = 0
+EPICS_REVISION = 15
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 4
+EPICS_MODIFICATION = 9
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
-# Not included in the official EPICS version number if zero
+# Not included if zero
 EPICS_PATCH_LEVEL = 1
 
-# Immediately after an official release the EPICS_PATCH_LEVEL is incremented
-# and the -DEV suffix is added (similar to the Maven -SNAPSHOT versions)
-EPICS_DEV_SNAPSHOT=
+# This will end in -DEV between official releases
+EPICS_DEV_SNAPSHOT=-DEV
+#EPICS_DEV_SNAPSHOT=
 
 # No changes should be needed below here
 

configure/CONFIG_CA_MODULE

@@ -1,9 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Libraries needed to link a host tool
-EPICS_BASE_HOST_LIBS = ca Com

configure/CONFIG_CA_VERSION

@@ -1,12 +0,0 @@
-# Version number for the Channel Access API and shared library
-
-EPICS_CA_MAJOR_VERSION = 4
-EPICS_CA_MINOR_VERSION = 13
-EPICS_CA_MAINTENANCE_VERSION = 7
-
-# Development flag, set to zero for release versions
-
-EPICS_CA_DEVELOPMENT_FLAG = 0
-
-# Immediately after a release the MAINTENANCE_VERSION
-# will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_COMMON

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  CONFIG_COMMON
@@ -38,7 +38,9 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
-PYTHON = python
+#-------------------------------------------------------
+# dbst based database optimization default
+DB_OPT = NO
 
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
@@ -78,14 +80,9 @@ COMMON_DIR = ../O.Common
 IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 
 #-------------------------------------------------------
-# Silencing the build - suppress messages during 'make -s'
+# Make echo output - suppress echoing if '-s' flag was given
 NOP = :
-ECHO = @$(if $(findstring s,$(MFLAGS)),$(NOP),echo)
-QUIET_FLAG := $(if $(findstring s,$(MFLAGS)),-q,)
-
-#-------------------------------------------------------
-# Convert 'make -q' flag into '-i' for genVersionHeader.pl
-QUESTION_FLAG := $(if $(findstring q,$(MFLAGS)),-i,)
+ECHO = @$(if $(filter -s,$(MFLAGS)),$(NOP),echo)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -95,7 +92,7 @@ INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 
-# Directories for libraries
+#Directories for libraries
 SHRLIB_SEARCH_DIRS          = $(INSTALL_LIB)
 
 #-------------------------------------------------------
@@ -169,13 +166,13 @@ TESTSHRLIBNAME = $(TESTSHRLIBNAME_$(SHARED_LIBRARIES))
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
+TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
 
 PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(TARGET_OBJS) $(PRODUCT_OBJS)
+PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
 
 LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # Windows resource files
@@ -267,7 +264,7 @@ LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRA
 LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
 
 #--------------------------------------------------
-# prefix, suffix, and ldflags for loadable shared libraries
+# prefix, suffix, and ldflags for loadable shared libraries 
 TARGET_LIB_LDFLAGS=$($(patsubst $*,LOADABLE_,$(findstring $*,$(LOADABLE_LIBRARY)))SHRLIB_LDFLAGS)
 LOADABLE_SHRLIB_PREFIX=$(SHRLIB_PREFIX)
 LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
@@ -306,7 +303,7 @@ LDLIBS = $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)\
 CPPFLAGS = $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
  $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS) $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS)\
  $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
- $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS) $(API_CPPFLAGS)
+ $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
 #--------------------------------------------------
 # ar definition default
@@ -335,14 +332,6 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# genVersion header defaults
-
-# C macro name
-GENVERSIONMACRO = VCSVERSION
-# C macro default value (empty to use date+time)
-GENVERSIONDEFAULT =
-
 #--------------------------------------------------
 # Header dependency file generation
 
@@ -378,14 +367,14 @@ PATH_FILTER = $(1)$(warning PATH_FILTER is deprecated; used for $(1))
 #	each list starts with the destination directory name(s)
 #	to make sure it's there
 
-INSTALL_PROD = $(PRODNAME:%= $(INSTALL_BIN)/%)
-INSTALL_LIBS = $(LIBNAME:%=$(INSTALL_LIB)/%)
-INSTALL_MUNCHS = $(MUNCHNAME:%=$(INSTALL_BIN)/%)
-INSTALL_SHRLIBS = $(SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
-INSTALL_LOADABLE_SHRLIBS = $(LOADABLE_SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
-INSTALL_DLLSTUB_LIBS = $(DLLSTUB_LIBNAME:%=$(INSTALL_LIB)/%)
-INSTALL_TCLLIBS = $(TCLLIBNAME:%=$(INSTALL_TCLLIB)/%)
-INSTALL_TCLINDEX = $(TCLINDEX:%=$(INSTALL_TCLLIB)/%)
+INSTALL_PROD= $(PRODNAME:%= $(INSTALL_BIN)/%)
+INSTALL_LIBS= $(LIBNAME:%=$(INSTALL_LIB)/%)
+INSTALL_MUNCHS= $(MUNCHNAME:%=$(INSTALL_BIN)/%)
+INSTALL_SHRLIBS= $(SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
+INSTALL_LOADABLE_SHRLIBS= $(LOADABLE_SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
+INSTALL_DLLSTUB_LIBS=$(DLLSTUB_LIBNAME:%=$(INSTALL_LIB)/%)
+INSTALL_TCLLIBS=$(TCLLIBNAME:%=$(INSTALL_TCLLIB)/%)
+INSTALL_TCLINDEX=$(TCLINDEX:%=$(INSTALL_TCLLIB)/%)
 INSTALL_SCRIPTS = $(SCRIPTS:%= $(INSTALL_BIN)/%)
 INSTALL_OBJS = $(OBJSNAME:%= $(INSTALL_BIN)/%)
 
@@ -465,5 +454,5 @@ COMMON_INC += $(filter $(COMMON_DIR)/%, $(foreach file, $(INC), \
 SOURCE_INC = $(wildcard $(file) $(SOURCE_INC_bbb) )
 SOURCE_INC_bbb = $(foreach dir, $(ALL_SRC_DIRS), $(SOURCE_INC_aaa)  )
 SOURCE_INC_aaa = $(addsuffix /$(file), $(dir) )
-
+ 
 endif

configure/CONFIG_DATABASE_MODULE

@@ -1,26 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Set EPICS_DATABASE if necessary
-ifndef EPICS_DATABASE
-  EPICS_DATABASE = $(if $(BUILDING_DATABASE),$(INSTALL_LOCATION),$(EPICS_BASE))
-
-  # Paths to tools built here
-  EPICS_DATABASE_HOST_BIN = $(EPICS_DATABASE)/bin/$(EPICS_HOST_ARCH)
-endif
-
-# Set location of locally-built tools
-MAKEBPT                    = $(EPICS_DATABASE_HOST_BIN)/makeBpt$(HOSTEXE)
-DBEXPAND                   = $(PERL) $(EPICS_DATABASE_HOST_BIN)/dbdExpand.pl
-DBTORECORDTYPEH            = $(PERL) $(EPICS_DATABASE_HOST_BIN)/dbdToRecordtypeH.pl
-DBTOMENUH                  = $(PERL) $(EPICS_DATABASE_HOST_BIN)/dbdToMenuH.pl
-DBDTOHTML                  = $(PERL) $(EPICS_DATABASE_HOST_BIN)/dbdToHtml.pl
-REGISTERRECORDDEVICEDRIVER = $(PERL) $(EPICS_DATABASE_HOST_BIN)/registerRecordDeviceDriver.pl
-MSI3_15                    = $(EPICS_DATABASE_HOST_BIN)/msi$(HOSTEXE)
-
-# Libraries needed to link a basic IOC
-EPICS_BASE_IOC_LIBS = dbRecStd dbCore ca Com

configure/CONFIG_DATABASE_VERSION

@@ -1,12 +0,0 @@
-# Version number for the database APIs and shared library
-
-EPICS_DATABASE_MAJOR_VERSION = 3
-EPICS_DATABASE_MINOR_VERSION = 18
-EPICS_DATABASE_MAINTENANCE_VERSION = 1
-
-# Development flag, set to zero for release versions
-
-EPICS_DATABASE_DEVELOPMENT_FLAG = 0
-
-# Immediately after a release the MAINTENANCE_VERSION
-# will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_ENV

@@ -3,8 +3,9 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #   Author: Andrew Johnson
 #   Date:   20 April 1995
@@ -34,10 +35,8 @@ EPICS_CA_CONN_TMO=30.0
 EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
-EPICS_CA_AUTO_ARRAY_BYTES=YES
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CA_MAX_SEARCH_PERIOD=300.0
-EPICS_CA_MCAST_TTL=1
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""
@@ -46,10 +45,12 @@ EPICS_CAS_SERVER_PORT=
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_IGNORE_ADDR_LIST=""
 
-# Servers to disable
-EPICS_IOC_IGNORE_SERVERS=""
-
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004
 
+# Other services:
+
+EPICS_CMD_PROTO_PORT=
+EPICS_AR_PORT=7002
+

configure/CONFIG_LIBCOM_MODULE

@@ -1,17 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Set location of locally generated tools
-YACC = $(abspath $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH))/antelope$(HOSTEXE)
-LEX = $(abspath $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH))/e_flex$(HOSTEXE) \
-        -S$(EPICS_BASE)/include/flex.skel.static
-
-# Default stack size for osiThread
-OSITHREAD_USE_DEFAULT_STACK = NO
-OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
-
-BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))

configure/CONFIG_LIBCOM_VERSION

@@ -1,12 +0,0 @@
-# Version number for the libcom APIs and shared library
-
-EPICS_LIBCOM_MAJOR_VERSION = 3
-EPICS_LIBCOM_MINOR_VERSION = 18
-EPICS_LIBCOM_MAINTENANCE_VERSION = 1
-
-# Development flag, set to zero for release versions
-
-EPICS_LIBCOM_DEVELOPMENT_FLAG = 0
-
-# Immediately after a release the MAINTENANCE_VERSION
-# will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_SITE

@@ -67,7 +67,8 @@
 #       linux-586               (linux-x86 host)
 #       linux-686               (linux-x86 host)
 #       linux-arm               (linux-x86 or -x86_64 host)
-#       linux-aarch64           (linux-x86_64 host)
+#       linux-arm_eb            (linux-x86 host)
+#       linux-arm_el            (linux-x86 host)
 #       linux-athlon            (linux-x86 host)
 #       linux-cris              (Axis GNU crosscompiler on linux-x86 host)
 #       linux-cris_v10          (Axis GNU crosscompiler on linux-x86 host)
@@ -75,6 +76,9 @@
 #       linux-microblaze
 #       linux-xscale_be
 #       vxWorks-486
+#       vxWorks-68040
+#       vxWorks-68040lc
+#       vxWorks-68060
 #       vxWorks-pentium
 #       vxWorks-ppc32           (32-bit PowerPC CPUs with full FPU)
 #       vxWorks-ppc32sf         (32-bit PowerPC CPUs without FPU)
@@ -165,18 +169,10 @@ EPICS_SITE_VERSION =
 GCC_PIPE = NO
 
 # Set RPATH when linking executables and libraries.
-#  Must be either YES, NO, or ORIGIN.  If you set this to NO you must also provide a
+#  Must be either YES or NO.  If you set this to NO you must also provide a
 #  way for Base executables to find their shared libraries when they are
 #  run at build-time, e.g. set the LD_LIBRARY_PATH environment variable.
-#  ORIGIN is a feature of the ELF executable format used by Linux, freebsd, and solaris.
 LINKER_USE_RPATH = YES
 
-# Only used when LINKER_USE_RPATH=ORIGIN
-# The build time root(s) of the relocatable tree (separate multiple w/ ':').
-# Linking to libraries under any root directory will be relative.
-# Linking to libraries outside of this root will be absolute.
-# All root directories are considered to be the same.
-LINKER_ORIGIN_ROOT = $(INSTALL_LOCATION)
-
 # Overrides for the settings above may appear in a CONFIG_SITE.local file
 -include $(CONFIG)/CONFIG_SITE.local

configure/CONFIG_SITE_ENV

@@ -59,6 +59,7 @@ EPICS_TZ = "CST6CDT,M3.2.0/2,M11.1.0/2"
 # US Hawaiian Standard Time, no DST:
 #EPICS_TZ = "HST10"
 
+
 # EPICS_TS_NTP_INET
 #	NTP time server ip address for VxWorks and RTEMS.
 #	IOC will use its boot host if this is not set.
@@ -69,11 +70,8 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
-# IOCSH_HISTEDIT_DISABLE
-# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
-IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/Makefile

@@ -20,14 +20,5 @@ CONFIGS += $(subst ../,,$(wildcard ../os/CONFIG*))
 CONFIGS += $(subst ../,,$(wildcard ../RELEASE*))
 CONFIGS += $(subst ../,,$(wildcard ../RULES*))
 
-CFG += CONFIG_LIBCOM_MODULE
-CFG += CONFIG_LIBCOM_VERSION
-
-CFG += CONFIG_CA_MODULE
-CFG += CONFIG_CA_VERSION
-
-CFG += CONFIG_DATABASE_MODULE
-CFG += CONFIG_DATABASE_VERSION
-
 include $(TOP)/configure/RULES
 

configure/RULES

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 ifndef T_A

configure/RULES.Db

@@ -4,17 +4,14 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
+#RULES.Db
 
-# RULES.Db
-
-# Set db substitutions and template file suffixes
+# Set db substitutions file suffix
 SUBST_SUFFIX ?= .substitutions
-TEMPL_SUFFIX ?= .template
 
-#---------------------------------------------------------------
-# vpath
+#####################################################  vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -22,13 +19,12 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-#---------------------------------------------------------------
-# dbflags dbdflags
+##################################################### dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -37,15 +33,13 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-#---------------------------------------------------------------
-# Targets
+##################################################### Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
-    $(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -92,28 +86,31 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
-TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
-TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
-            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
-            ../template))
+TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $*))))))))))
+TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $(TEMPLATE1)))))))))))
+TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+RAW=.raw
+DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
+COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
+endif
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#---------------------------------------------------------------
-# acf files
-
+#####################################################  acf files
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -126,8 +123,7 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#---------------------------------------------------------------
-# dependencies
+#####################################################  dependancies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -137,12 +133,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-#---------------------------------------------------------------
+##################################################### 
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -157,65 +153,60 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles clean-tests test-results junitfiles
 
-actionArchTargets = $(foreach action, $(ACTIONS), \
-    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
-cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
-include $(CONFIG)/CONFIG_APP_INCLUDE
+cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+-include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
+ifeq ($(EPICS_HOST_ARCH),$(T_A))
+host: install
+else
+# Do nothing
+host:
+endif
 
 install: buildInstall
 
-buildInstall: build
+buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all $(ACTIONS)
+.PHONY: all host $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-else
-  # T_A is defined
-  ifeq ($(EPICS_HOST_ARCH),$(T_A))
-    host: install
-  else
-    host:
-  endif
-
-  .PHONY: host
-endif # T_A
+endif # T_A defined
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#---------------------------------------------------------------
-# build dependancies, clean rule
+#####################################################  build dependancies, clean rule
 
-inc: $(COMMON_INC) $(INSTALL_INC)
+inc : $(COMMON_INC) $(INSTALL_INC) $(COMMON_DBDS) $(COMMON_DBDCATS) \
+	$(INSTALL_DBDS) $(INSTALL_DBD_INSTALLS)
 
-build: $(COMMON_DBDS) $(COMMON_DBS) $(COMMON_DBDCATS) \
+build : $(COMMON_DBDS) $(COMMON_DBS) $(COMMON_DBDCATS) \
 	$(INSTALL_DBDS) $(INSTALL_DBS) \
 	$(DBDDEPENDS_FILES) $(TARGETS) \
 	$(INSTALL_DB_INSTALLS) $(INSTALL_DBD_INSTALLS)
 
 clean: db_clean
 
-db_clean:
+db_clean : 
 	@$(RM) $(COMMONS) $(DBDDEPENDS_FILES)
 	@$(RM) *_registerRecordDeviceDriver.cpp
 	@$(RM) $(TARGETS)
 
-.PHONY: db_clean
+.PHONY : db_clean
 
 realclean: clean
 
-#---------------------------------------------------------------
-# Dependency files
+##################################################### Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -266,19 +257,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(DEP): %$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): %$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): %.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(DEP): ../%$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): ../%.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -292,8 +283,14 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-#---------------------------------------------------------------
-# Substitution files
+##################################################### CapFast filter
+
+$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
+	@$(RM) $@
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
+
+##################################################### Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -314,21 +311,25 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-#---------------------------------------------------------------
-# Template files
+##################################################### Template files
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
+	@$(RM) $@
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+$(INSTALL_DB)/%.template: %.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
+$(INSTALL_DB)/%.template: ../%.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
+.PRECIOUS: $(COMMON_DIR)/%.template
 
-#---------------------------------------------------------------
-# INC files
+##################################################### INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -362,8 +363,7 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-#---------------------------------------------------------------
-# DBD files
+##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -389,7 +389,7 @@ $(COMMON_DIR)/%.dbd: ../%Include.dbd
 
 # Make DBDCAT file x depend on x_DBD source files
 define  DBDCAT_template
-$$(COMMON_DIR)/$(1).dbd: ../Makefile $$(foreach file, $$($(1)_DBD),$$(DBDCAT_SOURCE) )
+$$(COMMON_DIR)/$(1).dbd : ../Makefile $$(foreach file, $$($(1)_DBD),$$(DBDCAT_SOURCE) )
 endef
 $(foreach name,$(subst .dbd,,$(DBDCAT)), $(eval $(call DBDCAT_template,$(name))))
 
@@ -418,7 +418,7 @@ $(INSTALL_DBD)/%: ../%
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
 define  DBD_INSTALLS_template
-$$(INSTALL_DBD)/$$(notdir $(1)): $(1)
+$$(INSTALL_DBD)/$$(notdir $(1)) : $(1)
 	$(ECHO) "Installing $$@"
 	@$$(INSTALL) -d -m $$(INSTALL_PERMISSIONS) $$^ $$(INSTALL_DBD)
 endef
@@ -426,64 +426,56 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-#---------------------------------------------------------------
-# HTML files
+##################################################### HTML files
 
-$(COMMON_DIR)/%.html: %.dbd.pod
-	@$(RM) $(notdir $@)
-	$(DBDTOHTML) $(DBDFLAGS) -o $(notdir $@) $<
+$(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
+	@$(RM) $@ $(notdir $@)
+	$(PERL) $(TOOLS)/dbdToHtml.pl $(DBDFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pod
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -s -o $(notdir $@) $<
+$(COMMON_DIR)/%.html: %.pod $(TOOLS)/podToHtml.pl
+	@$(RM) $@ $(notdir $@)
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pm
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+$(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
+	@$(RM) $@ $(notdir $@)
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pm
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
-	@$(MKDIR) $(dir $@)
+$(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
+	@$(RM) $@ $(notdir $@)
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pl
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
-	@$(MV) $(notdir $@) $@
+.PRECIOUS: $(COMMON_DIR)/%.html
 
-.PRECIOUS: $(COMMON_DIR)/%.html %.html
+##################################################### DB files
 
-#---------------------------------------------------------------
-# DB files
-
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf
+$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -501,6 +493,22 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+
+$(COMMON_DIR)/%.db$(RAW): ../%.db
+	@$(RM) $@
+	$(CP) $< $@
+
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
+	$(ECHO) "Optimizing database $@"
+	@$(RM) $@
+	$(DBST) . $< -d > $@
+
+.PRECIOUS: $(COMMON_DIR)/%.db
+.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
+else
+
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -508,13 +516,14 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
 define  DB_INSTALLS_template
-$$(INSTALL_DB)/$$(notdir $(1)): $(1)
+$$(INSTALL_DB)/$$(notdir $(1)) : $(1)
 	$(ECHO) "Installing $$@"
 	@$$(INSTALL) -d -m $$(INSTALL_PERMISSIONS) $$^ $$(INSTALL_DB)
 endef
@@ -523,8 +532,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-#---------------------------------------------------------------
-# register record,device,driver support
+##################################################### register record,device,driver support
+
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -539,3 +548,5 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 	$(REGISTERRECORDDEVICEDRIVER) $(REGRDDFLAGS) -o $@ $< $(basename $@) $(IOCS_APPL_TOP)
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
+
+##################################################### END OF FILE

configure/RULES.ioc

@@ -4,10 +4,9 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES.ioc
+#RULES.ioc
 
 include $(CONFIG)/RULES_DIRS
 

configure/RULES_ARCHS

@@ -90,4 +90,6 @@ realclean:
 .PHONY : $(BUILD_ARCHS) rebuild archsCommonClean
 .PHONY : $(ACTIONS) clean realclean archclean host all
 
-include $(CONFIG)/RULES_COMMON
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_BUILD

@@ -6,12 +6,11 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_BUILD
-
-# Rules for making things specified in a Makefile
 #
-# CWD is O.$(T_A), but most sources are elsewhere
+#	Rules for making things specified in Makefile
+#
+#	we are in O.$(T_A), but most sources are elsewhere
+#
 
 ifndef BASE_RULES_BUILD
 BASE_RULES_BUILD=1
@@ -43,7 +42,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_HOST)
 OBJS += $(OBJS_HOST)
 PROD += $(PROD_HOST)
 SCRIPTS += $(SCRIPTS_HOST)
-TARGETS += $(TARGETS_HOST)
 TESTLIBRARY += $(TESTLIBRARY_HOST)
 TESTSCRIPTS += $(TESTSCRIPTS_HOST)
 TESTPROD += $(TESTPROD_HOST)
@@ -55,7 +53,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_IOC)
 OBJS += $(OBJS_IOC)
 PROD += $(PROD_IOC)
 SCRIPTS += $(SCRIPTS_IOC)
-TARGETS += $(TARGETS_IOC)
 TESTLIBRARY += $(TESTLIBRARY_IOC)
 TESTSCRIPTS += $(TESTSCRIPTS_IOC)
 TESTPROD += $(TESTPROD_IOC)
@@ -75,31 +72,34 @@ HTMLS_DIR ?= .
 #	First target
 
 all: install
-ifeq ($(EPICS_HOST_ARCH),$(T_A))
+ifeq ($(EPICS_HOST_ARCH),$T_A)
 host: install
 else
 # Do nothing
 host:
 endif
 
-include $(CONFIG)/RULES_FILE_TYPE
+-include $(CONFIG)/RULES_FILE_TYPE
 
-include $(CONFIG)/RULES.Db
+-include $(CONFIG)/RULES.Db
 
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
 
-#ifneq (,$(strip $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) ))
+ifneq (,$(strip $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) \
+        $(LOADABLE_LIBRARY)))
 include $(CONFIG)/RULES_TARGET
-#endif
+endif
 
 #---------------------------------------------------------------
 # Read dependency files
 
+ifneq (inc,$(strip $(MAKECMDGOALS)))
 ifneq (,$(strip $(HDEPENDS_FILES)))
 $(filter-out $(wildcard *$(DEP)), $(HDEPENDS_FILES)): | $(COMMON_INC)
 -include $(HDEPENDS_FILES)
 endif
+endif
 
 #---------------------------------------------------------------
 #   Products and Object libraries
@@ -147,13 +147,14 @@ build: inc
 build: $(OBJSNAME) $(LIBTARGETS) $(PRODTARGETS) $(TESTPRODTARGETS) \
 	$(TARGETS) $(TESTSCRIPTS) $(INSTALL_LIB_INSTALLS)
 
-inc: $(COMMON_INC) $(INSTALL_INC) $(INSTALL_CONFIGS)
+inc : $(COMMON_INC) $(INSTALL_INC) $(INSTALL_CONFIGS) \
+	$(INSTALL_HTMLS)
 
-buildInstall: \
+buildInstall : \
 	$(INSTALL_SCRIPTS) $(INSTALL_PROD) $(INSTALL_MUNCHS) \
 	$(INSTALL_TCLLIBS) $(INSTALL_TCLINDEX) \
-	$(INSTALL_HTMLS) $(INSTALL_DOCS) \
 	$(INSTALL_OBJS) \
+	$(INSTALL_DOCS) \
 	$(INSTALL_TEMPLATE) \
 	$(INSTALL_BIN_INSTALLS)
 
@@ -173,9 +174,9 @@ ifdef RES
 	@$(RM) *$(RES)
 endif
 
-# Sort directories to remove duplicates & make parents first
-$(sort $(DIRECTORY_TARGETS)):
-	$(MKDIR) $@
+# Sort mkdir targets to remove duplicates & make parents first
+$(DIRECTORY_TARGETS):
+	$(MKDIR) $(sort $@)
 
 # Install LIB_INSTALLS libraries before linking executables
 $(TESTPRODNAME) $(PRODNAME): | $(INSTALL_LIB_INSTALLS)
@@ -187,33 +188,26 @@ endif
 
 # RELEASE file consistency checking
 checkRelease:
-	+$(CONVERTRELEASE) checkRelease
-warnRelease:
 	$(CONVERTRELEASE) checkRelease
+warnRelease:
+	-$(CONVERTRELEASE) checkRelease
 noCheckRelease:
 ifeq ($(EPICS_HOST_ARCH),$(T_A))
 	$(info Warning: RELEASE file consistency checks have been disabled)
 endif
 
-# $(FINAL_DIR) signals eventual install locations to makeRPath script
-$(TESTPRODNAME): FINAL_DIR=.
-$(PRODNAME): FINAL_DIR=$(INSTALL_BIN)
-$(TESTSHRLIBNAME): FINAL_DIR=.
-$(SHRLIBNAME): FINAL_DIR=$(INSTALL_SHRLIB)
-$(LOADABLE_SHRLIBNAME): FINAL_DIR=$(INSTALL_SHRLIB)
-
 #---------------------------------------------------------------
 #  The order of the following rules is
 #  VERY IMPORTANT !!!!
 
 $(TESTPRODNAME) $(PRODNAME): $(PRODUCT_OBJS) $(PROD_RESS) $(PROD_DEPLIBS)
 
-$(TESTPRODNAME) $(PRODNAME): %$(EXE): | $(INSTALL_LIB)
+$(TESTPRODNAME) $(PRODNAME): %$(EXE):
 	@$(RM) $@
-	$(LINK.cpp)
+	$(DEBUGCMD) $(LINK.cpp)
 	$(MT_EXE_COMMAND)
 
-%_ctdt$(OBJ): %_ctdt.c
+%_ctdt$(OBJ) : %_ctdt.c
 	@$(RM) $@
 	$(COMPILE.ctdt) $<
 
@@ -231,9 +225,9 @@ $(TESTPRODNAME) $(PRODNAME): %$(EXE): | $(INSTALL_LIB)
 
 # Cancel GNUMake's built-in rules, which don't have our _INC
 # dependencies so could get used in some circumstances (gdd)
-%.o: %.c
-%.o: %.cc
-%.o: %.cpp
+%.o : %.c
+%.o : %.cc
+%.o : %.cpp
 
 # Include files are order-only prerequisites for compilation:
 %$(OBJ): %.c | $(COMMON_INC) $(INSTALL_INC)
@@ -267,7 +261,7 @@ YACCOPT ?= $($*_YACCOPT)
 
 # must be a separate rule since when not using '-d' the
 # prefix for .h will be different then .c
-%.h: %.c %.y
+%.h : %.c %.y
 
 %.c: %.l
 	@$(RM) $@
@@ -311,10 +305,6 @@ $(LOADABLE_SHRLIBNAME): $(LOADABLE_SHRLIB_PREFIX)%$(LOADABLE_SHRLIB_SUFFIX):
 	$(LINK.shrlib)
 	$(MT_DLL_COMMAND)
 
-$(LIBNAME) $(SHRLIBNAME) $(LOADABLE_SHRLIBNAME): | $(INSTALL_LIB)
-$(INSTALL_LIB):
-	@$(MKDIR) $@
-
 #---------------------------------------------------------------
 # C++ munching for VxWorks
 
@@ -345,12 +335,6 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 	@$(RM) $@
 	$(LINK.mod)
 
-#---------------------------------------------------------------
-# Generate Perl include path module
-%ModuleDirs.pm: $(wildcard $(TOP)/configure/RELEASE*)
-	@$(MKDIR) $(dir $@)
-	$(CONVERTRELEASE) -T $(TOP) $@
-
 #---------------------------------------------------------------
 # Automated testing
 
@@ -358,7 +342,8 @@ runtests: run-tap-tests
 run-tap-tests: $(TESTSCRIPTS.t)
 ifneq ($(TESTSCRIPTS.t),)
 ifdef RUNTESTS_ENABLED
-	$(PROVE) --failures --color $^ || $(PROVE_FAILURE)
+	$(ECHO) "$(PROVE) $^"
+	@$(PROVE) $^ || $(PROVE_FAILURE)
 endif
 endif
 
@@ -369,7 +354,8 @@ test-results: tap-results
 tap-results: $(TAPFILES)
 ifneq ($(strip $(TAPFILES)),)
 ifdef RUNTESTS_ENABLED
-	$(PROVE.tap) --failures --color $^ || $(PROVE_FAILURE)
+	$(ECHO) "$(PROVE.tap) $^"
+	@$(PROVE.tap) $^ || $(PROVE_FAILURE)
 endif
 
 CURRENT_TAPFILES := $(wildcard $(TAPFILES))
@@ -377,8 +363,8 @@ CURRENT_JUNITFILES := $(wildcard $(JUNITFILES))
 endif
 
 clean-tests:
-ifneq ($(CURRENT_TAPFILES),)
-	$(RM) $(CURRENT_TAPFILES)
+ifneq ($(CURRENT_TAPFILES)$(TAPS_FAILED_LOG),)
+	$(RM) $(CURRENT_TAPFILES) $(TAPS_FAILED_LOG)
 endif
 ifneq ($(CURRENT_JUNITFILES),)
 	$(RM) $(CURRENT_JUNITFILES)
@@ -387,7 +373,8 @@ endif
 # A .tap file is the output from running the associated test script
 $(TAPFILES.t): %.tap: %.t
 ifdef RUNTESTS_ENABLED
-	$(PERL) $< -tap > $@
+	$(ECHO) "$(PERL) $< -tap > $@"
+	@$(PERL) $< -tap > $@ || $(TAPFILE_FAILURE)
 endif
 
 $(JUNITFILES.t): %-results.xml: %.tap
@@ -396,51 +383,26 @@ $(JUNITFILES.t): %-results.xml: %.tap
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	$(EXPAND_TOOL) -t $(INSTALL_LOCATION) -a $(T_A) $< $@
+	$(CP) $< $@
 
 # Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
 %.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	$(PERL) $(TOOLS)/makeTestfile.pl $(T_A) $(EPICS_HOST_ARCH) $@ $<
-
-#---------------------------------------------------------------
-# Generate $(API_HEADER) files on request (%API.h)
-
-ifdef API_HEADER
-# Install them
-INC += $(API_HEADER)
-
-# Ensure we generate them early enough
-INSTALL_API_HEADERS = $(addprefix $(INSTALL_INCLUDE)/,$(API_HEADER))
-$(filter-out $(INSTALL_API_HEADERS), $(INSTALL_INC)) $(HDEPENDS_FILES): \
-    | $(INSTALL_API_HEADERS)
-
-# How to make one
-$(COMMON_DIR)/%API.h: $(TOOLS)/makeAPIheader.pl
-	@$(RM) $@
-	$(PERL) $(TOOLS)/makeAPIheader.pl -o $@ $(@:$(COMMON_DIR)/%API.h=%)
-endif
-
-# Generate header with version number from VCS
-
-ifneq ($(GENVERSION),)
-$(COMMON_DIR)/$(GENVERSION): FORCE
-	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
-endif
+	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
 
 define  BIN_INSTALLS_template
-$$(INSTALL_BIN)/$$(notdir $(1)): $(1)
+$$(INSTALL_BIN)/$$(notdir $(1)) : $(1)
 	$(ECHO) "Installing $$(<F)"
 	@$$(INSTALL) -d -m $$(BIN_PERMISSIONS) $$^ $$(INSTALL_BIN)
 endef
 $(foreach file, $(BIN_INSTALLS), $(eval $(call BIN_INSTALLS_template, $(file))))
 
 define  LIB_INSTALLS_template
-$$(INSTALL_LIB)/$$(notdir $(1)): $(1)
+$$(INSTALL_LIB)/$$(notdir $(1)) : $(1)
 	$(ECHO) "Installing $$(<F)"
 	@$$(INSTALL) -d -m $$(LIB_PERMISSIONS) $$^ $$(INSTALL_LIB)
 endef
@@ -490,11 +452,9 @@ $(INSTALL_TCLLIB)/%: ../%
 	@$(INSTALL) -d -m $(BIN_PERMISSIONS) $< $(INSTALL_TCLLIB)
 endif
 
-ifneq ($(TCLINDEX),)
 $(INSTALL_TCLLIB)/$(TCLINDEX): $(INSTALL_TCLLIBS)
 	$(ECHO) "Updating $@"
 	$(ECHO) eval auto_mkindex $(INSTALL_TCLLIB) "$(TCLLIBNAME)" | tclsh
-endif
 
 $(INSTALL_LOADABLE_SHRLIBS): $(INSTALL_SHRLIB)/%: %
 	$(ECHO) "Installing loadable shared library $@"
@@ -506,7 +466,6 @@ ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
 endif # LOADABLE_SHRLIB_VERSION
 endif # LOADABLE_SHRLIB_SUFFIX
 
-ifneq ($(INSTALL_CONFIGS),)
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -514,21 +473,20 @@ $(INSTALL_CONFIG)/%: %
 $(INSTALL_CONFIG)/%: ../%
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-endif
 
-$(INSTALL_INCLUDE)/%: $(COMMON_DIR)/%
+$(INSTALL_INCLUDE)/% : $(COMMON_DIR)/%
 	$(ECHO) "Installing generated generic include file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_INCLUDE)/%: %
+$(INSTALL_INCLUDE)/% : %
 	$(ECHO) "Installing generic include file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_INCLUDE)/os/$(OS_CLASS)/%: %
+$(INSTALL_INCLUDE)/os/$(OS_CLASS)/% : %
 	$(ECHO) "Installing OS dependent include file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_INCLUDE)/compiler/$(CMPLR_CLASS)/%: %
+$(INSTALL_INCLUDE)/compiler/$(CMPLR_CLASS)/% : %
 	$(ECHO) "Installing compiler dependent include file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
@@ -540,6 +498,10 @@ $(INSTALL_DOC)/%: ../%
 	$(ECHO) "Installing doc $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(INSTALL_DOC)
 
+$(INSTALL_HTML)/$(HTMLS_DIR)/%: $(COMMON_DIR)/%
+	$(ECHO) "Installing generated html $@"
+	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+
 $(INSTALL_HTML)/$(HTMLS_DIR)/%: %
 	$(ECHO) "Installing html $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -548,10 +510,6 @@ $(INSTALL_HTML)/$(HTMLS_DIR)/%: ../%
 	$(ECHO) "Installing html $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_HTML)/$(HTMLS_DIR)/%: $(COMMON_DIR)/%
-	$(ECHO) "Installing generated html $@"
-	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-
 $(INSTALL_TEMPLATES_SUBDIR)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -560,18 +518,14 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-include $(CONFIG)/RULES_EXPAND
+-include $(CONFIG)/RULES_EXPAND
 
 .PRECIOUS: %.i %.o %.c %.nm %.cpp %.cc
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
 .PHONY: runtests run-tap-tests tapfiles junitfiles test-results tap-results
-.PHONY: clean-tests checkRelease warnRelease noCheckRelease FORCE
+.PHONY: clean-tests checkRelease warnRelease noCheckRelease
 
-include $(CONFIG)/RULES_COMMON
-
-else
-    $(warning Warning: Base configure/RULES_BUILD file included more than once. \
-        Does configure/RELEASE have multiple pointers to $(EPICS_BASE)?)
 endif # BASE_RULES_BUILD
+#	EOF RULES_BUILD

configure/RULES_COMMON

@@ -1,48 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2018 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# These rules show the set of Makefiles, config files and
-# rules files loaded by GNUmake.
-
-show-makefiles::
-	@echo
-	@echo Makefiles read:
-define SHOW_MAKEFILE_template
-show-makefiles::
-	@echo "    $(1)"
-endef
-$(foreach file,$(MAKEFILE_LIST), \
-    $(eval $(call SHOW_MAKEFILE_template,$(file))))
-
-.PHONY: show-makefiles
-
-
-# These rules support printing a Makefile variable values.
-# Many variables are only set inside an O.<arch> build directory.
-#   make PRINT.T_A
-
-PRINT_Var = $(@:PRINT.%=%)
-PRINT.%:
-	@echo $(PRINT_Var) = '$($(PRINT_Var))'
-
-.PHONY: PRINT PRINT.%
-
-
-# Clean rules for recursively deleting editor backup files
-# and dependency (.d) files from CWD and below.
-
-cvsclean:
-	$(PERL) $(CVSCLEAN)
-depclean:
-	$(PERL) $(DEPCLEAN)
-
-.PHONY: cvsclean depclean
-
-
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER

configure/RULES_DIRS

@@ -99,4 +99,7 @@ $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
 .PHONY : $(dirActionArchTargets)
 .PHONY : $(actionArchTargets)
 
-include $(CONFIG)/RULES_COMMON
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_EXPAND

@@ -1,83 +1,30 @@
-#*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# RULES_EXPAND
+# <top>/configure/RULES_EXPAND
 
 vpath %@ $(USR_VPATH) $(ALL_SRC_DIRS)
 
 #---------------------------------------------------------------
-# Template variable expansion
-
-# This feature allows you to instantiate simple template files at
-# build-time, replacing macros spelled @NAME@ with values provided
-# by the Makefile. The template filename must end with an @ sign,
-# which is removed to create the expanded filename.
-
-# Makefiles can use this variable expansion as follows:
-#
-# 1. Add the template filename (with the trailing @ sign) to either
-#    the EXPAND or EXPAND_COMMON variable, for example:
-#        EXPAND_COMMON += myVersion.h@
-#    Use EXPAND_COMMON for templates that don't depend on the
-#    target architecture (these will be generated in O.Common).
-# 2. There are 2 ways of defining template macros. The simplest
-#    is to add a NAME=VALUE string to the EXPAND_VARS variable for
-#    the desired macros, e.g.:
-#        EXPAND_VARS += MY_MAJOR_VERSION=$(MY_MAJOR_VERSION)
-#        EXPAND_VARS += MY_MINOR_VERSION=$(MY_MINOR_VERSION)
-#    These values may not contain spaces, even if inside quotes.
-# 3. A better way in the above case is to add the names of any
-#    Makefile variables that should be provided as macros to the
-#    variable EXPAND_ME, like this:
-#        EXPAND_ME += MY_MAJOR_VERSION
-#        EXPAND_ME += MY_MINOR_VERSION
-#    The values of these variables may contain spaces.
-# 4. The macros TOP and ARCH will be set by the build system.
-#    TOP is the value of $(INSTALL_LOCATION) for this module.
-#    ARCH is the target architecture $(T_A), but is only set
-#    while expanding files in EXPAND
-# 5. Add the expanded filename to some other variable that will
-#    cause it to be created and used, such as INC here:
-#        INC += myVersion.h
+# Variable expansion
 
 # Default settings
 EXPAND_TOOL ?= $(PERL) $(TOOLS)/expandVars.pl
 
-EXPANDARCH = -a $(T_A)
-EXPANDFLAGS += -t $(INSTALL_LOCATION)
-EXPANDFLAGS += $(addprefix -D ,$(EXPAND_VARS) $($@_EXPAND_VARS))
-EXPANDFLAGS += $(foreach var, $(EXPAND_ME) $($@_EXPAND_ME), \
-    -D$(var)="$(strip $($(var)))")
+EXPANDFLAGS += -t $(INSTALL_LOCATION) -a $(T_A)
+EXPANDFLAGS += $(addprefix -D ,$(EXPAND_VARS))
 
 # The names of files to be expanded must end with '@'
 EXPANDED = $(EXPAND:%@=%)
-EXPANDED_COM = $(EXPAND_COMMON:%@=%)
-EXPANDED_COMMON = $(EXPANDED_COM:%=$(COMMON_DIR)/%)
 
 $(EXPANDED): %: %@
 	$(ECHO) "Expanding $< to $@"
 	@$(RM) $@
-	$(EXPAND_TOOL) $(EXPANDARCH) $(EXPANDFLAGS) $($@_EXPANDFLAGS) $< $@
-
-$(EXPANDED_COM): %: %@
-	$(ECHO) "Expanding $< to $(COMMON_DIR)/$@"
-	@$(RM) $@
-	$(EXPAND_TOOL) $(EXPANDFLAGS) $($@_EXPANDFLAGS) $< $@
-$(EXPANDED_COMMON): $(COMMON_DIR)/%: %
-	@$(MV) $< $@
+	@$(EXPAND_TOOL) $(EXPANDFLAGS) $($@_EXPANDFLAGS) $< $@
 
 clean: expand_clean
 
 expand_clean:
-	@$(RM) $(EXPANDED) $(EXPANDED_COMMON)
+	@$(RM) $(EXPANDED)
 
-.PRECIOUS: $(EXPANDED) $(EXPANDED_COMMON)
+.PRECIOUS: $(EXPANDED)
 .PHONY: expand_clean
 
 #---------------------------------------------------------------
@@ -86,8 +33,10 @@ expand_clean:
 ASSEMBLE_TOOL ?= $(PERL) $(TOOLS)/assembleSnippets.pl
 
 define COMMON_ASSEMBLY_template
+ifneq '$$($1_PATTERN)' ''
 $1_SNIPPETS += $$(foreach dir, .. $$(SRC_DIRS), \
     $$(wildcard $$(dir)/$$($1_PATTERN)))
+endif
 $(COMMON_DIR)/$1: $$($1_SNIPPETS)
 	$(ECHO) "Assembling common file $$@ from snippets"
 	@$(RM) $1
@@ -98,8 +47,10 @@ $(foreach asy, $(COMMON_ASSEMBLIES), \
     $(eval $(call COMMON_ASSEMBLY_template,$(strip $(asy)))))
 
 define ASSEMBLY_template
+ifneq '$$($1_PATTERN)' ''
 $1_SNIPPETS += $$(foreach dir, .. $$(SRC_DIRS), \
     $$(wildcard $$(dir)/$$($1_PATTERN)))
+endif
 $1: $$($1_SNIPPETS)
 	$(ECHO) "Assembling file $$@ from snippets"
 	@$(RM) $$@
@@ -114,3 +65,4 @@ $1$(DEP):
 endef
 $(foreach asy, $(sort $(COMMON_ASSEMBLIES) $(ASSEMBLIES)), \
     $(eval $(call ASSEMBLY_DEP_template,$(strip $(asy)))))
+

configure/RULES_FILE_TYPE

@@ -7,11 +7,9 @@
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
-# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files,
-# excluding EPICS_BASE
+# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
 #
-RELEASE_RULES_BUILDS = $(foreach top, \
-    $(filter-out EPICS_BASE, $(RELEASE_TOPS)), \
+RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), \
     $(wildcard $($(top))/configure/RULES_BUILD))
 ifneq ($(RELEASE_RULES_BUILDS),)
   include $(RELEASE_RULES_BUILDS)
@@ -25,7 +23,7 @@ ifneq ($(RELEASE_CFG_RULES),)
   include $(RELEASE_CFG_RULES)
 endif
 
-# If this is not BASE then include <top>/configure/RULES_BUILD
+# If this is not BASE then include <TOP>/configure/RULES_BUILD
 #
 ifeq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
 TOP_RULES_BUILDS = $(wildcard $(TOP)/configure/RULES_BUILD)
@@ -69,3 +67,7 @@ file_type_clean:
 	@$(RM) $(foreach type, $(FILE_TYPE), $($(type)))
 
 .PHONY : file_type_clean
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_MODULES

@@ -1,60 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Support modules can use these rules to build submodules too.
-#
-# The requirements to do so are:
-#    1. Create a file CONFIG_SITE.local in the same directory as the
-#       Makefile, which defines these variables (the last one is empty):
-#           PARENT_MODULE - The name submodules call their parent
-#           INSTALL_LOCATION := $($(PARENT_MODULE))
-#           CONFIG_INSTALLS =
-#    2. The Makefile must set TOP and include $(TOP)/configure/CONFIG and
-#       CONFIG_SITE.local
-#    3. Submodules are added to the SUBMODULES variable in the Makefile
-#    4. Dependencies between submodules must be set using
-#           <name>_DEPEND_DIRS = <prerequisites>
-#    5. The Makefile must end by including $(TOP)/configure/RULES_MODULES
-#    6. Submodules must have a configure/RELEASE file that contains
-#           -include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local
-#    7. Submodules must have a configure/CONFIG_SITE file that contains
-#           -include $(TOP)/../CONFIG_SITE.local
-
-# Add checked-out submodules to DIRS
-LIVE_SUBMODULES = $(subst /Makefile,,$(wildcard $(addsuffix /Makefile, $(SUBMODULES))))
-DIRS += $(LIVE_SUBMODULES)
-
-include $(CONFIG)/RULES_DIRS
-
-INSTALL_LOCATION_ABS := $(abspath $(INSTALL_LOCATION))
-RELEASE_LOCAL := RELEASE.$(EPICS_HOST_ARCH).local
-
-# Ensure that RELEASE.<host>.local exists before doing anything else
-all host $(DIRS) $(ARCHS) $(ACTIONS) $(dirActionTargets) $(dirArchTargets) \
-    $(dirActionArchTargets) $(actionArchTargets): | $(RELEASE_LOCAL)
-
-# Convenience target
-RELEASE.host: $(RELEASE_LOCAL)
-
-$(RELEASE_LOCAL): Makefile CONFIG_SITE.local
-	$(ECHO) Creating $@ with
-	$(ECHO) "    $(PARENT_MODULE) = $(INSTALL_LOCATION_ABS)"
-	@echo $(PARENT_MODULE) = $(INSTALL_LOCATION_ABS)> $@
-realclean:
-	$(RM) $(wildcard RELEASE.*.local)
-
-.PHONY: RELEASE.host realclean
-
-# Append all our live submodule failure files
-FAILURE_FILES = $(addsuffix /$(TEST_FAILURE_FILENAME), $(LIVE_SUBMODULES))
-
-define combine_failure_files
-	@$(TOUCH) $(FAILURE_FILES)
-	@$(CAT) $(FAILURE_FILES) >> $(TEST_FAILURE_FILE)
-endef
-runtests: | $(addsuffix $(DIVIDER)runtests, $(LIVE_SUBMODULES))
-	$(if $(FAILURE_FILES), $(combine_failure_files))
-test-results: | $(addsuffix $(DIVIDER)test-results, $(LIVE_SUBMODULES))
-	$(if $(FAILURE_FILES), $(combine_failure_files))

configure/RULES_OCTAVE

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 # Octave definitions and rules

configure/RULES_TARGET

@@ -1,13 +1,18 @@
 #*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_TARGET
+#
+#  RULES_TARGET
+#
+#  This file is to be maintained by the community.
+#
+#-----------------------------------------------------------------------
 
 define TARGET_template
 $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
@@ -15,13 +20,12 @@ $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
              $$($(1)_$(2)_DEFAULT))
 endef
 
-$(foreach type, SRCS RCS OBJS LDFLAGS LDOBJS SYS_LIBS , \
+$(foreach type, SRCS RCS OBJS LDFLAGS OBJLIBS LDOBJS SYS_LIBS , \
 $(foreach target, $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) , \
     $(eval $(call TARGET_template,$(strip $(target)),$(type)))))
 
 #-----------------------------------------------------------------------
 
-# This define block requires GNU make 3.81
 define PROD_template
 ifeq ($$(strip $$($(1)_OBJS) $$($(1)_SRCS) $$(PRODUCT_OBJS)),)
 $(1)_OBJS = $(1)$$(OBJ)
@@ -95,20 +99,12 @@ $(1)_DLL_DEPLIBS=$$(foreach lib, $$($(1)_DLL_LIBS), \
 $$(LIB_PREFIX)$(1)$$(LIB_SUFFIX):$$($(1)_OBJSNAME) $$($(1)_RESS)
 $$(LIB_PREFIX)$(1)$$(LIB_SUFFIX):$$($(1)_DEPLIBS)
 
-ifneq ($$($(1)_API),)
-$$(LIB_PREFIX)$(1)$$(LIB_SUFFIX): API_CPPFLAGS += -DBUILDING_$$($(1)_API)_API
-endif
-
 ifeq ($$(SHARED_LIBRARIES),YES)
 
 ifdef SHRLIB_SUFFIX
 $$(SHRLIB_PREFIX)$(1)$$(SHRLIB_SUFFIX):$$($(1)_OBJSNAME) $$($(1)_RESS)
 $$(SHRLIB_PREFIX)$(1)$$(SHRLIB_SUFFIX):$$($(1)_DEPLIBS)
 $$(SHRLIB_PREFIX)$(1)$$(SHRLIB_SUFFIX):$$($(1)_DLL_DEPLIBS)
-
-ifneq ($$($(1)_API),)
-$$(SHRLIB_PREFIX)$(1)$$(SHRLIB_SUFFIX): API_CPPFLAGS += -DBUILDING_$$($(1)_API)_API
-endif
 endif
 
 endif
@@ -149,14 +145,10 @@ $(1)_DLL_DEPLIBS=$$(foreach lib, $$($(1)_DLL_LIBS),\
 $$(LOADABLE_SHRLIB_PREFIX)$(1)$$(LOADABLE_SHRLIB_SUFFIX):$$($(1)_OBJSNAME) $$($(1)_RESS)
 $$(LOADABLE_SHRLIB_PREFIX)$(1)$$(LOADABLE_SHRLIB_SUFFIX):$$($(1)_DEPLIBS)
 $$(LOADABLE_SHRLIB_PREFIX)$(1)$$(LOADABLE_SHRLIB_SUFFIX):$$($(1)_DLL_DEPLIBS)
-
-ifneq ($$($(1)_API),)
-$$(LOADABLE_SHRLIB_PREFIX)$(1)$$(LOADABLE_SHRLIB_SUFFIX): \
-    API_CPPFLAGS += -DBUILDING_$$($(1)_API)_API
-endif
 endef
 
 $(foreach target, $(LOADABLE_LIBRARY), \
     $(eval $(call LOADABLE_LIBRARY_template,$(strip $(target)))))
 
 #-----------------------------------------------------------------------
+

configure/RULES_TOP

@@ -9,35 +9,20 @@
 
 include $(CONFIG)/RULES_DIRS
 
-# Disable most top rules when installing into a parent's tree, indicated
-# by PARENT_MODULE being set in the modules/CONFIG_SITE.local file and
-# INSTALL_LOCATION pointing to the the same place as in the parent.
-ifeq ($(origin PARENT_MODULE),file)
-  ifeq ($(INSTALL_LOCATION),$($(PARENT_MODULE)))
-    DISABLE_TOP_RULES=YES
-  endif
-endif
-
-ifndef DISABLE_TOP_RULES
-  #
-  # Rules for a regular application top directory
-  #
-
 distclean: realclean cvsclean realuninstall
 
+CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
+cvsclean:
+	$(PERL) $(CVSCLEAN)
+
 realuninstall: uninstallDirs
 	$(RMDIR) $(INSTALL_LOCATION_BIN) $(INSTALL_LOCATION_LIB)
 
-UNINSTALL_DIRS += $(INSTALL_DB) $(INSTALL_DBD) $(INSTALL_DOC) $(INSTALL_HTML)
-UNINSTALL_DIRS += $(INSTALL_INCLUDE) $(INSTALL_TEMPLATES) $(DIRECTORY_TARGETS)
-ifneq ($(INSTALL_LOCATION),$(TOP))
-  UNINSTALL_DIRS += $(INSTALL_CONFIG)
-endif
+UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
+    $(INSTALL_HTML) $(INSTALL_TEMPLATES) $(INSTALL_DB) $(DIRECTORY_TARGETS)
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 
-  # Remove the bin and lib directories if they have no sub-directories
-  #
 EMPTY_INSTALL_DIRS = \
     $(if $(wildcard $(INSTALL_LOCATION_BIN)/*),,$(INSTALL_LOCATION_BIN)) \
     $(if $(wildcard $(INSTALL_LOCATION_LIB)/*),,$(INSTALL_LOCATION_LIB))
@@ -50,29 +35,17 @@ uninstall$(DIVIDER)%:
 	$(RMDIR) $(addsuffix /$(subst uninstall$(DIVIDER),,$@), \
 	    $(INSTALL_LOCATION_BIN) $(INSTALL_LOCATION_LIB))
 
-runtests test-results:
-	@$(PERL) $(TOOLS)/testFailures.pl $(TEST_FAILURE_FILE)
-
-else
-  #
-  # Using a disabled rule aborts
-  #
-
-  distclean uninstall realuninstall archuninstall:
-	$(error Target '$@' not available in a submodule)
-
-endif # DISABLE_TOP_RULES
-
 before-runtests before-test-results: rm-failure-file
 rm-failure-file:
-	@$(RM) $(TEST_FAILURE_FILE)
-	@$(TOUCH) $(TEST_FAILURE_FILE)
+	@$(RM) $(TESTS_FAILED_PATH)
+runtests test-results:
+	$(SHOWTESTFAILURES)
 
 help:
 	@echo "Usage: gnumake [options] [target] ..."
 	@echo "Targets supported by all Makefiles:"
 	@echo "     all            - Same as install (default rule)"
-	@echo "     inc            - Installs header files"
+	@echo "     inc            - Installs header, dbd and html files"
 	@echo "     build          - Builds and installs all targets"
 	@echo "     install        - Builds and installs all targets"
 	@echo "     buildInstall   - Same as install (deprecated)"
@@ -82,39 +55,31 @@ help:
 	@echo "                      Cannot be used within an O.<arch> dir"
 	@echo "     rebuild        - Same as clean install"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
-	@echo "     depclean       - Removes .d files from all O.<arch> dirs."
-	@echo "     cvsclean       - Removes backup files etc. from all dirs below"
-	@echo "     runtests       - Run self-tests, summarize results immediately"
-	@echo "     tapfiles       - Run self-tests, save to O.<arch>/*.tap files"
-	@echo "     test-results   - Summarize all O.<arch>/*.tap files"
-	@echo "     clean-tests    - Removes all O.<arch>/*.tap files"
+	@echo "     runtests       - Run self-tests, summarize results"
 	@echo "\"Partial\" build targets supported by Makefiles:"
 	@echo "     host           - Builds and installs $(EPICS_HOST_ARCH) only."
 	@echo "     inc$(DIVIDER)<arch>     - Installs <arch> only header files."
 	@echo "     build$(DIVIDER)<arch>   - Builds and installs <arch> only."
 	@echo "     install$(DIVIDER)<arch> - Builds and installs <arch> only."
 	@echo "     clean$(DIVIDER)<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "Targets supported by top level Makefile:"
-ifndef DISABLE_TOP_RULES
-	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall$(DIVIDER)<arch> - Remove bin & lib directories for <arch> only."
+	@echo "Targets supported by top level Makefile:"
+	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
 	@echo "     distclean      - Same as realclean cvsclean realuninstall."
-endif
+	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
-	@echo "Object targets are supported by the O.<arch> level Makefile .e.g"
+	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY: distclean uninstall rm-failure-file help
-.PHONY: realuninstall archuninstall uninstallDirs
+.PHONY: distclean cvsclean realuninstall archuninstall uninstallDirs
+.PHONY: uninstall rm-failure-file help
 
-ifndef DISABLE_TOP_RULES
-  # Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files
-  #
-  RELEASE_CFG_TOP_RULES = $(foreach top, $(RELEASE_TOPS), \
-      $(wildcard $($(top))/cfg/TOP_RULES*))
-  ifneq ($(RELEASE_CFG_TOP_RULES),)
-    include $(RELEASE_CFG_TOP_RULES)
-  endif
+# Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files
+#
+RELEASE_CFG_TOP_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/TOP_RULES*))
+ifneq ($(RELEASE_CFG_TOP_RULES),)
+  include $(RELEASE_CFG_TOP_RULES)
 endif

configure/Sample.Makefile

@@ -3,8 +3,8 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# SPDX-License-Identifier: EPICS
-# EPICS Base is distributed subject to a Software License Agreement found
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #	Makefile  for  base/src/sample

configure/os/CONFIG.Common.RTEMS

@@ -27,13 +27,9 @@ ifneq ($(CONFIG),$(TOP)/configure)
 -include $(TOP)/configure/CONFIG_SITE.Common.RTEMS
 endif
 
-#--------------------------------------------------
-# Set RTEMS_BSP from T_A if not already done
-RTEMS_BSP ?= $(subst RTEMS-,,$(T_A))
-
 #-------------------------------------------------------
 # Pick up the RTEMS tool/path definitions from the RTEMS BSP directory.
-include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(RTEMS_BSP)/Makefile.inc
+include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(subst RTEMS-,,$(T_A))/Makefile.inc
 include $(RTEMS_CUSTOM)
 include $(CONFIG.CC)
 
@@ -76,7 +72,7 @@ CPPFLAGS += $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
  $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
  $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
-ECHO = @$(if $(findstring s,$(MFLAGS)),$(NOP),echo)
+ECHO = @$(if $(filter -s,$(MFLAGS)),$(NOP),echo)
 
 #--------------------------------------------------
 # Although RTEMS uses gcc, it wants to use gcc its own way

configure/os/CONFIG.Common.RTEMS-at91rm9200ek

@@ -9,6 +9,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = at91rm9200ek
-RTEMS_TARGET_CPU = arm
+RTEMS_TARGET_CPU=arm
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = beatnik
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-gen68360

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = gen68360
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mcp750

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mcp750
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme167

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mvme167
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme2100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme2700

@@ -1,7 +1,6 @@
 #
 # Author: Matt Rippa
 #
-RTEMS_BSP = mvme2700
 RTEMS_TARGET_CPU = powerpc
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme3100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme5500
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-pc386

@@ -5,15 +5,14 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = pc386
-RTEMS_TARGET_CPU = i386
+RTEMS_TARGET_CPU=i386
 
 MUNCH_SUFFIX = .boot
 define MUNCH_CMD
-	$(RM) $*.bin
-	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< $*.bin
+	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
 	$(BIN2BOOT) $@ 0x00097E00 \
-	    $(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 $*.bin 0x00100000 0
+		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
+	rm -f temp.bin
 endef
 
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386-qemu

@@ -1,11 +0,0 @@
-# CONFIG.Common.RTEMS-pc386-qemu
-#
-# Definitions for the RTEMS-pc386-qemu target
-# Site-specific overrides go in CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-#-------------------------------------------------------
-
-# Include definitions from RTEMS-pc386
-include $(CONFIG)/os/CONFIG.Common.RTEMS-pc386
-
-RTEMS_QEMU_FIXUPS = YES

configure/os/CONFIG.Common.RTEMS-psim

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = psim
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -5,7 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = uC5282
 RTEMS_TARGET_CPU = m68k
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 

configure/os/CONFIG.Common.darwin-aarch64

@@ -0,0 +1,14 @@
+# CONFIG.Common.darwin-aarch64
+#
+# This file is maintained by the build community.
+#
+# Definitions for darwin-aarch64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.darwin-aarch64
+#-------------------------------------------------------
+
+#
+# To build universal binaries, configure ARCH_CLASS
+# in the file CONFIG_SITE.Common.darwin-aarch64
+
+# Include definitions common to all Darwin targets
+include $(CONFIG)/os/CONFIG.darwinCommon.darwinCommon

configure/os/CONFIG.Common.linux-aarch64

@@ -1,11 +0,0 @@
-# CONFIG.Common.linux-aarch64
-#
-# Definitions for linux-arm target builds
-# Override these settings in CONFIG_SITE.Common.linux-aarch64
-#-------------------------------------------------------
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = aarch64
-

configure/os/CONFIG.Common.linux-arm_eb

@@ -0,0 +1,9 @@
+# CONFIG.Common.linux-arm_eb
+#
+# Definitions for linux-arm_eb (big endian) target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-arm_eb
+#-------------------------------------------------------
+
+# Include definitions common to all Linux-arm targets
+include $(CONFIG)/os/CONFIG.Common.linux-arm
+

configure/os/CONFIG.Common.linux-arm_el

@@ -0,0 +1,9 @@
+# CONFIG.Common.linux-arm_el
+#
+# Definitions for linux-arm_el (little endian) target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-arm_el
+#-------------------------------------------------------
+
+# Include definitions common to all linux-arm targets
+include $(CONFIG)/os/CONFIG.Common.linux-arm
+

configure/os/CONFIG.Common.linuxCommon

@@ -23,17 +23,15 @@ STATIC_LDFLAGS_YES= -Wl,-Bstatic
 STATIC_LDFLAGS_NO=
 STATIC_LDLIBS_YES= -Wl,-Bdynamic
 
-# Set runtime path for shared libraries if LINKER_USE_RPATH=YES
-SHRLIBDIR_RPATH_LDFLAGS_YES = $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath,%)
-SHRLIBDIR_RPATH_LDFLAGS_ORIGIN = $(shell $(MAKERPATH) -O '\$$ORIGIN' -F $(FINAL_DIR) -R $(LINKER_ORIGIN_ROOT) $(SHRLIB_DEPLIB_DIRS))
+# Set runtime path for shared libraries if USE_RPATH=YES and STATIC_BUILD=NO
+SHRLIBDIR_RPATH_LDFLAGS_YES_NO = $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath,%)
 SHRLIBDIR_LDFLAGS += \
-    $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+    $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH)_$(STATIC_BUILD))
 
-# Set runtime path for products if LINKER_USE_RPATH=YES
-PRODDIR_RPATH_LDFLAGS_YES = $(PROD_DEPLIB_DIRS:%=-Wl,-rpath,%)
-PRODDIR_RPATH_LDFLAGS_ORIGIN = $(shell $(MAKERPATH) -O '\$$ORIGIN' -F $(FINAL_DIR) -R $(LINKER_ORIGIN_ROOT) $(PROD_DEPLIB_DIRS))
+# Set runtime path for products if USE_RPATH=YES and STATIC_BUILD=NO
+PRODDIR_RPATH_LDFLAGS_YES_NO = $(PROD_DEPLIB_DIRS:%=-Wl,-rpath,%)
 PRODDIR_LDFLAGS += \
-    $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+    $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH)_$(STATIC_BUILD))
 
 # Link libraries controlled by COMMANDLINE_LIBRARY
 # The newest Linux versions only need readline, older ones need both

configure/os/CONFIG.Common.vxWorksCommon

@@ -1,7 +1,7 @@
 # CONFIG.Common.vxWorksCommon
 #
 # Definitions for vxWorks target archs
-# Override these definitions in CONFIG_SITE.Common.vxWorksCommon
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorksCommon
 # or CONFIG_SITE.<host>.vxWorksCommon
 #-------------------------------------------------------
 
@@ -63,6 +63,8 @@ VXWORKS_MAJOR_VERSION = $(basename $(basename $(VXWORKS_VERSION)))
 
 # These are needed for vxWorks 6.x; the GNU toolset version number
 # is in the path to the compiler tools:
+VX_GNU_VERSION_5.4 = 2.95
+VX_GNU_VERSION_5.5 = 2.96
 VX_GNU_VERSION_6.0 = 3.3.2
 VX_GNU_VERSION_6.1 = 3.3.2
 VX_GNU_VERSION_6.2 = 3.3.2
@@ -78,21 +80,30 @@ VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
 
 #--------------------------------------------------
-# Fix old Linux WIND_HOST_TYPE
+# Fix WIND_BASE for vxWorks 6.x on linux
+# NB: We know the value of WIND_HOST_TYPE here, but not VXWORKS_VERSION
 ifeq ($(WIND_HOST_TYPE),x86-linux)
-  WIND_HOST_TYPE = x86-linux2
+  WIND_HOST_TYPE_5 = x86-linux
+  WIND_HOST_TYPE_6 = x86-linux2
+  WIND_HOST_TYPE = $(WIND_HOST_TYPE_$(VXWORKS_MAJOR_VERSION))
 endif
 
 #--------------------------------------------------
 # vxWorks directory definitions
-VX_DIR = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR_5 = $(WIND_BASE)
+VX_DIR_6 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
 
-GNU_TARGET_INCLUDE_DIR = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+VX_INCLUDE_DIRS_5 = $(VX_DIR)/target/h
+VX_INCLUDE_DIRS_6 = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # vxWorks GNU directories
 
-GNU_DIR = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR_5 = $(WIND_BASE)/host/$(WIND_HOST_TYPE)
+GNU_DIR_6 = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR = $(GNU_DIR_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # This finds nm on any supported VxWorks version
@@ -102,7 +113,9 @@ NM = $(firstword $(wildcard $(WIND_BASE)/*/$(WIND_HOST_TYPE)/bin/$(NMPROG)))
 
 #--------------------------------------------------
 # A linker script is essential for munching from vxWorks 6.6 onwards
-# (i.e. with versions that use gcc 4.1.2 or later).
+# (i.e. with versions that use gcc 4.1.2 or later).  It can be used
+# with any vxWorks 5 or 6 version, but apparently should not be used
+# when compiling for 68K (which isn't supported in vxWorks 6 anyway)
 MUNCH_LDFLAGS_6 = -T $(VX_DIR)/target/h/tool/gnu/ldscripts/link.OUT
 MUNCH_LDFLAGS = $(MUNCH_LDFLAGS_$(VXWORKS_MAJOR_VERSION))
 
@@ -118,10 +131,11 @@ export TOOL_FAMILY = GNU
 OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
-# Fix for vxWorks headers that use macros defined in vxWorks.h but
+# Fix for vxWorks 5 headers that use macros defined in vxWorks.h but
 # which don't actually include vxWorks.h themselves, for example the
 # target/h/sys/stat.h file which uses ULONG.  This also stops dbDefs.h
-# from defining the OFFSET macro, which generates lots of warnings.
+# from defining the OFFSET macro, which generates lots of warnings in
+# both vxWorks 5 and 6.
 OP_SYS_INCLUDE_CPPFLAGS += -include $(VX_DIR)/target/h/vxWorks.h
 
 #--------------------------------------------------
@@ -134,6 +148,7 @@ OPT_CXXFLAGS_YES = -O2
 CODE_CFLAGS =
 #
 # For vxWorks versions before 6.3 we need this g++ compiler flag
+CODE_CXXFLAGS_5 = -fno-implicit-templates
 CODE_CXXFLAGS_6.0 = -fno-implicit-templates
 CODE_CXXFLAGS_6.1 = -fno-implicit-templates
 CODE_CXXFLAGS_6.2 = -fno-implicit-templates
@@ -146,10 +161,8 @@ SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS =
 
 #--------------------------------------------------
-# Don't use gcc 2.x for dependency generation
-
-HDEPENDS_METHOD_2 = MKMF
-HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
+# Earlier versions of gcc don't understand -MF
+HDEPENDS_COMPFLAGS = -MM > $@
 
 #--------------------------------------------------
 # osithead use default stack, YES or NO override
@@ -173,8 +186,10 @@ VXCPPFLAGS = $(filter-out $(OP_SYS_INCLUDE_CPPFLAGS),$(CPPFLAGS))
 PREPROCESS.cpp = $(CPP) $(VXCPPFLAGS) $(INCLUDES) $< > $@
 
 #--------------------------------------------------
-# Use LEDLIB for command-line editing
-COMMANDLINE_LIBRARY = LEDLIB
+# Don't use gcc 2.x for dependency generation
+
+HDEPENDS_METHOD_2 = MKMF
+HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
 
 #--------------------------------------------------
 # Allow site overrides

configure/os/CONFIG.UnixCommon.Common

@@ -8,10 +8,9 @@
 CP = cp
 MV = mv
 RM = rm -f
-MKDIR = mkdir -p
+MKDIR = mkdir
 RMDIR = rm -rf
 CAT = cat
-TOUCH = touch
 
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.UnixCommon.Common

configure/os/CONFIG.darwin-aarch64.Common

@@ -0,0 +1,8 @@
+# CONFIG.darwin-aarch64.Common
+#
+# Definitions for darwin-aarch64 host builds
+# Sites may override these definitions in CONFIG_SITE.darwin-aarch64.Common
+#-------------------------------------------------------
+
+#Include definitions common to unix hosts
+include $(CONFIG)/os/CONFIG.UnixCommon.Common

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -65,7 +65,7 @@ GNU = NO
 #
 # Darwin shared libraries
 #
-SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined dynamic_lookup \
+SHRLIB_LDFLAGS = -dynamiclib -undefined dynamic_lookup \
     -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
     $(addprefix -compatibility_version , $(SHRLIB_VERSION)) \
     $(addprefix -current_version , $(SHRLIB_VERSION))

configure/os/CONFIG.linux-386.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-486.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-586.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-686.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86.linux-arm_eb

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86.linux-arm_eb
+#
+# Definitions for linux-x86 host - linux-arm_eb (big endian) target builds
+# Sites may override these definitions in CONFIG_SITE.linux-x86.linux-arm_eb
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86.linux-arm_el

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86.linux-arm_el
+#
+# Definitions for linux-x86 host - linux-arm_el (little endian) target builds
+# Sites may override these definitions in CONFIG_SITE.linux-x86.linux-arm_el
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86.win32-x86-mingw

@@ -21,4 +21,4 @@ LOADABLE_SHRLIB_LDFLAGS = -shared \
 GNU_LDLIBS_YES =
 
 # Link with system libraries
-OP_SYS_LDLIBS = -lpsapi -lws2_32 -ladvapi32 -luser32 -lkernel32 -lwinmm -ldbghelp
+OP_SYS_LDLIBS = -lws2_32 -ladvapi32 -luser32 -lkernel32 -lwinmm

configure/os/CONFIG.linux-x86_64.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86_64.linux-aarch64

@@ -1,28 +0,0 @@
-# CONFIG.linux-x86_64.linux-aarch64
-#
-# Definitions for linux-x86_64 host - linux-aarch64 target builds
-# Sites may override these in CONFIG_SITE.linux-x86_64.linux-aarch64
-#-------------------------------------------------------
-
-VALID_BUILDS = Ioc
-GNU_TARGET = aarch64-linux
-
-# prefix of compiler tools
-CMPLR_SUFFIX =
-CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
-
-# Provide a link-time path for readline if needed
-OP_SYS_INCLUDES += $(READLINE_DIR:%=-I%/include)
-READLINE_LDFLAGS = $(READLINE_DIR:%=-L%/lib)
-RUNTIME_LDFLAGS_READLINE_YES_NO = $(READLINE_DIR:%=-Wl,-rpath,%/lib)
-RUNTIME_LDFLAGS += \
-    $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH)_$(STATIC_BUILD))
-SHRLIBDIR_LDFLAGS += $(READLINE_LDFLAGS)
-PRODDIR_LDFLAGS += $(READLINE_LDFLAGS)
-
-# Library flags
-STATIC_LDFLAGS_YES= -Wl,-Bstatic
-STATIC_LDFLAGS_NO=
-STATIC_LDLIBS_YES= -Wl,-Bdynamic
-STATIC_LDLIBS_NO=
-

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw

@@ -32,4 +32,4 @@ LOADABLE_SHRLIB_LDFLAGS = -shared \
 GNU_LDLIBS_YES =
 
 # Link with system libraries
-OP_SYS_LDLIBS = -lpsapi -lws2_32 -ladvapi32 -luser32 -lkernel32 -lwinmm -ldbghelp
+OP_SYS_LDLIBS = -lws2_32 -ladvapi32 -luser32 -lkernel32 -lwinmm

configure/os/CONFIG.win32-x86.Common

@@ -11,7 +11,6 @@ MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
 NOP = $(PERL) -e ''
 CAT = $(PERL) -MExtUtils::Command -e cat
-TOUCH = $(PERL) -MExtUtils::Command -e touch
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO
@@ -27,5 +26,3 @@ endif
 # Needed to find dlls for base installed build tools (antelope,eflex,...)
 PATH := $(EPICS_BASE_BIN):$(PATH)
 
-# Silence the tr1 namespace deprecation warnings
-USR_CXXFLAGS_WIN32 += -D_SILENCE_TR1_NAMESPACE_DEPRECATION_WARNING

configure/os/CONFIG.win32-x86.win32-x86

@@ -49,9 +49,9 @@ OPT_CFLAGS_YES_NO = -Ox -Oy-
 OPT_CFLAGS_YES = $(OPT_CFLAGS_YES_$(OPT_WHOLE_PROGRAM))
 
 #
-# -Zi generate program database for debugging information
+# -Z7 generate C7 compatible debugging information (inside .obj)
 # -RTCsu enable run-time error checks
-OPT_CFLAGS_NO = -Zi -RTCsu
+OPT_CFLAGS_NO = -Z7 -RTCsu
 
 # specify object file name and location
 OBJ_CFLAG = -Fo
@@ -116,9 +116,9 @@ OPT_CXXFLAGS_YES_NO = -Ox -Oy-
 OPT_CXXFLAGS_YES = $(OPT_CXXFLAGS_YES_$(OPT_WHOLE_PROGRAM))
 
 #
-# -Zi generate program database for debugging information
+# -Z7 generate C7 compatible debugging information (inside .obj)
 # -RTCsu enable run-time error checks
-OPT_CXXFLAGS_NO = -RTCsu -Zi
+OPT_CXXFLAGS_NO = -RTCsu -Z7
 
 # specify object file name and location
 OBJ_CXXFLAG = -Fo
@@ -135,25 +135,11 @@ OBJ_CXXFLAG = -Fo
 STATIC_CXXFLAGS_YES= -MT$(VISC_CFLAGS_DEBUG) $(BUILD_DLL_CFLAGS)
 STATIC_CXXFLAGS_NO= -MD$(VISC_CFLAGS_DEBUG) $(BUILD_DLL_CFLAGS) -DEPICS_CALL_DLL
 
-STATIC_LDLIBS_YES=ws2_32.lib advapi32.lib user32.lib kernel32.lib winmm.lib dbghelp.lib
+STATIC_LDLIBS_YES=ws2_32.lib advapi32.lib user32.lib kernel32.lib winmm.lib
 STATIC_LDLIBS_NO=
 STATIC_LDFLAGS=
 RANLIB=
 
-#
-# option needed for parallel builds with Visual Studio 2013 onward
-# VS2012 and above have VisualStudioVersion, so just need to exclude 2012 (11.0)
-# -FS Force Synchronous PDB Writes
-#
-ifneq ($(VisualStudioVersion),)
-ifneq ($(VisualStudioVersion),11.0)
-  OPT_CXXFLAGS_NO += -FS
-  OPT_CFLAGS_NO += -FS
-endif
-endif
-
-
-#
 # add -profile here to run the ms profiler
 # -LTCG whole program optimization
 # -incremental:no full linking

configure/os/CONFIG_SITE.Common.RTEMS-pc386

@@ -0,0 +1,3 @@
+#
+# Site-specific overrides for RTEMS-pc386 target
+#

configure/os/CONFIG_SITE.Common.RTEMS-pc386-qemu

@@ -1,9 +0,0 @@
-# CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-# Site-specific overrides for the RTEMS-pc386-qemu target
-#
-
-# If you're building this architecture you _probably_ want to
-# run the tests for it under QEMU, but if not you can turn
-# them off here by commenting out this line:
-CROSS_COMPILER_RUNTEST_ARCHS += RTEMS-pc386-qemu

configure/os/CONFIG_SITE.Common.darwin-aarch64

@@ -0,0 +1,9 @@
+# CONFIG_SITE.Common.darwin-aarch64
+#
+# Site override definitions for darwin-aarch64 target builds
+#-------------------------------------------------------
+
+#
+#   arm64 devices:  Apple Silicon M1
+
+ARCH_CLASS = arm64

configure/os/CONFIG_SITE.Common.linux-aarch64

@@ -1,32 +0,0 @@
-# CONFIG_SITE.Common.linux-aarch64
-#
-# Site Specific definitions for all linux-aarch64 targets
-#-------------------------------------------------------
-
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
-# shared libraries will be found automatically.  However if the .so
-# files are installed at a different path to their compile-time path
-# then in order to be found at runtime do one of these:
-# a) LD_LIBRARY_PATH must include the full absolute pathname to
-#    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
-#    executables.
-# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
-#    will add the named directory to the list contained in the executables.
-# c) Add the runtime path to /etc/ld.so.conf and run ldconfig
-#    to inform the system of the shared library location.
-
-# Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
-
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-#COMMANDLINE_LIBRARY = READLINE
-
-# Needs -lncurses (RHEL 5 etc.):
-#COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-# Needs -lcurses (older versions)
-#COMMANDLINE_LIBRARY = READLINE_CURSES
-

configure/os/CONFIG_SITE.Common.linux-x86

@@ -49,7 +49,3 @@ OP_SYS_CFLAGS += -D_FILE_OFFSET_BITS=64
 # Tune GNU compiler output for a specific 32-bit cpu-type
 # (e.g. generic, native, i386, i686, pentium2/3/4, prescott, k6, athlon etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
-
-
-# Developers using a suitable compiler may enable its address sanitizer:
-#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -45,7 +45,3 @@ COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
 # Tune GNU compiler output for a specific 64-bit cpu-type
 # (e.g. generic, native, core2, nocona, k8, opteron, athlon64, barcelona etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
-
-
-# Developers using a suitable compiler may enable its address sanitizer:
-#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -1,13 +1,21 @@
 # CONFIG_SITE.Common.vxWorksCommon
 #
 # Site specific definitions for vxWorks target builds.
+# Only the local epics system manager should modify this file
 
 # Compiler options can vary with the vxWorks version number, so we
-# need to know that.  Do not include any third-level digits.
+# need to know that.  However don't include any third-level digits
+# (e.g. the .2 in 5.5.2) because we don't need them.
 
-# Note: vxWorks 5.4.x and 5.5.x (Tornado 2.x) are not supported.
-# VxWorks 6.0 through 6.5 use older, untested versions of GCC.
+# Note: vxWorks 5.4.x (Tornado 2.0.x) is not supported
 
+#VXWORKS_VERSION = 5.5
+#VXWORKS_VERSION = 6.0
+#VXWORKS_VERSION = 6.1
+#VXWORKS_VERSION = 6.2
+#VXWORKS_VERSION = 6.3
+#VXWORKS_VERSION = 6.4
+#VXWORKS_VERSION = 6.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
@@ -19,6 +27,7 @@ VXWORKS_VERSION = 6.9
 # CONFIG_SITE.$(EPICS_HOST_ARCH).vxWorksCommon file.
 
 # WIND_BASE is where you installed the Wind River software.
+# Under vxWorks 6.x this is *not* the same as the old VX_DIR setting
 
 #WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -8,8 +8,7 @@ GNU_TARGET = arm-xilinx-linux-gnueabi
 
 # Set GNU tools install path
 # Examples are installations at the APS:
-#GNU_DIR = /usr/local/vw/zynq-2011.09
-GNU_DIR = /usr/local/vw/zynq-2016.1/gnu/arm/lin
+GNU_DIR = /usr/local/vw/zynq-2011.09
 #GNU_DIR = /usr/local/Xilinx/SDK/2016.3/gnu/arm/lin
 #GNU_DIR = /APSshare/XilinxSDK/2015.4/gnu/arm/lin
 

configure/os/CONFIG_SITE.linux-x86.linux-arm_eb

@@ -0,0 +1,13 @@
+#  CONFIG_SITE.linux-x86.linux-arm_eb
+#
+# Site specific definitions for linux-x86 host - linux-arm_eb target builds
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm
+
+# Path to the GNU toolset for linux-arm_eb (big endian) target
+#GNU_DIR = /local/anj/cross-arm/gcc-3.4.5-glibc-2.3.6/armeb-linux
+
+# GNU crosscompiler target name
+#GNU_TARGET = armeb-linux

configure/os/CONFIG_SITE.linux-x86.linux-arm_el

@@ -0,0 +1,13 @@
+#  CONFIG_SITE.linux-x86.linux-arm_el
+#
+# Site specific definitions for linux-x86 host - linux-arm_el target builds
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm
+
+# Path to the GNU toolset for linux-arm_el (little endian) target
+#GNU_DIR = /local/anj/cross-arm/gcc-3.4.5-glibc-2.3.6/armel-linux
+
+# GNU crosscompiler target name
+#GNU_TARGET = armel-linux

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -14,10 +14,10 @@
 #GNU_DIR = /usr/local
 
 # Different distribution cross-build packages use different prefixes:
-# Ubuntu, RHEL7:
-CMPLR_PREFIX = i686-w64-mingw32-
-# RHEL6:
-#CMPLR_PREFIX = i686-pc-mingw32-
+# Ubuntu:
+#CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL:
+CMPLR_PREFIX = i686-pc-mingw32-
 # Debian?
 #CMPLR_PREFIX = i586-mingw32msvc-
 

configure/os/CONFIG_SITE.linux-x86_64.linux-aarch64

@@ -1,30 +0,0 @@
-# CONFIG_SITE.linux-x86.linux-aarch64
-#
-# Site specific definitions for linux-x86 host - linux-aarch64 target builds
-#-------------------------------------------------------
-
-# Set GNU crosscompiler target name
-GNU_TARGET = aarch64-linux-gnu
-
-# Set GNU tools install path
-# Examples is the installation at the APS:
-GNU_DIR = /usr/local/Xilinx/SDK/2018.3/gnu/aarch64/lin/aarch64-linux
-
-# If cross-building shared libraries and the paths on the target machine are
-# different than on the build host, you should uncomment the lines below to
-# disable embedding compile-time library paths into the generated files.
-# You will need to provide another way for programs to find their shared
-# libraries at runtime, such as by setting LD_LIBRARY_PATH or (better) using
-# mechanisms related to /etc/ld.so.conf
-#SHRLIBDIR_RPATH_LDFLAGS_YES_NO =
-#PRODDIR_RPATH_LDFLAGS_YES_NO =
-# However it is usually simpler to set STATIC_BUILD=YES here and not
-# try to use shared libraries at all when cross-building, like this:
-STATIC_BUILD=YES
-SHARED_LIBRARIES=NO
-
-# To use libreadline, point this to its install prefix
-#READLINE_DIR = $(GNU_DIR)
-#READLINE_DIR = /tools/cross/linux-x86.linux-arm/readline
-# See CONFIG_SITE.Common.linux-arm for other COMMANDLINE_LIBRARY values
-#COMMANDLINE_LIBRARY = READLINE

documentation/.gitignore

@@ -1,3 +0,0 @@
-*.db
-epics-base.tag
-html/

documentation/KnownProblems.html

@@ -4,29 +4,25 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in EPICS 7.0.3.1</title>
+  <title>Known Problems in R3.15.9</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS 7.0.3.1: Known Problems</h1>
+<h1 style="text-align: center">EPICS Base R3.15.9: Known Problems</h1>
 
 <p>Any patch files linked below should be applied at the root of the
-base-7.0.3.1 tree. Download them, then use the GNU Patch program as
+base-3.15.9 tree. Download them, then use the GNU Patch program as
 follows:</p>
 
-<blockquote><pre>% <b>cd <i>/path/to/</i>base-7.0.3.1</b>
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.15.9</b>
 % <b>patch -p1 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
 
-<p>The following problems were known by the developers at the time of this
-release:</p>
+<p>The following significant problems have been reported with this
+version of EPICS Base:</p>
 
 <ul>
 
-<!-- Items added after release should be formatted thusly:
-  <li>YYYY-MM-DD: Description of problem.
-    <a href="fix.patch">This patch</a> fixes the problem.
-    ...</li>
--->
+  <li>None known as yet.</li>
 
 </ul>
 

documentation/Makefile

@@ -1,33 +0,0 @@
-TOP = ..
-include $(TOP)/configure/CONFIG
-
-ifdef T_A
-
-DOXYGEN=doxygen
-
-EXPAND = Doxyfile
-
-EXPAND_ME += EPICS_VERSION
-EXPAND_ME += EPICS_REVISION
-EXPAND_ME += EPICS_MODIFICATION
-EXPAND_ME += EPICS_PATCH_LEVEL
-
-ME = documentation/O.$(T_A)/html
-
-install: doxygen
-
-doxygen: Doxyfile
-	$(DOXYGEN)
-	rsync -av $(TOP)/html/ html/
-
-.PHONY: doxygen
-
-commit: doxygen
-	$(TOUCH) html/.nojekyll
-	(cd $(TOP) && $(CURDIR)/../commit-gh.sh $(ME)/ $(ME)/.nojekyll $(ME)/*.* $(ME)/*/*.*)
-
-.PHONY: commit
-
-endif # T_A
-
-include $(TOP)/configure/RULES

documentation/README.darwin.html

@@ -1,184 +0,0 @@
-<html>
-<head>
-<title>Installation notes for EPICS on Mac OS X (Darwin)</title>
-</head>
-<body>
-
-
-<h1>Building EPICS base</h1>
-<ul>
-<li>
-To build base:
-<ol>
-<li>
-Set the EPICS_HOST_ARCH environment variable to darwin-ppc, darwin-x86 or darwin-ppcx86.
-The scripts in the
-base/startup directory can automate this.  For example, here's part
-of my Bash login script (~/.bash_login):
-<pre>
-#
-# EPICS
-#
-EPICS_BASE="${HOME}/src/EPICS/base"
-EPICS_EXTENSIONS="${HOME}/src/EPICS/extensions"
-<strong>.</strong> "${EPICS_BASE}"/startup/unix.sh
-</pre>
-</li>
-<li>
-<code>cd</code> to the EPICS base top-level source directory.
-</li>
-<li>
-Uncomment the appropriate line in the relevent
-EPICS_BASE/configure/os/CONFIG_SITE.Common.darwin-xxx file for your EPICS_HOST_ARCH value.
-Newer versions of OS X (e.g. Snow Leopard) may include only 64 bit versions of some OS libraries,
-so should only have the x86_64 ARCH_CLASS.
-</li>
-<li>
-Run <code>make</code>.
-</li>
-</ol>
-
-</li>
-
-<li>
-As distributed, EPICS on Mac OS X uses the readline command line input
-routines.  IOC applications are more pleasant to interact with if
-either the readline or libtecla library is used.  The easiest
-way to get either or both of these libraries on to your system is to
-download and install them using the either the DarwinPorts
-distribution or the Fink package manager. If you don't want to install
-the readline library, set the COMMANDLINE_LIBRARY variable in one of
-the CONFIG_SITE files to EPICS.
-<p>
-Information on DarwinPorts is available from
-<a href="http://www.opendarwin.org/projects/darwinports/">the DarwinPorts
-project page</a>.
-DarwinPorts binary packages are available from
-<a href="http://packages.opendarwin.org/">here</a>.
-<p>
-Fink may be downloaded from
-<a href="http://fink.sourceforge.net/">the Source Forge</a>.
-</li>
-
-<li>
-If broadcasts are not seen locally, try adding "localhost" (127.0.0.1)
-to the EPICS_CA_ADDR_LIST.
-</li>
-</ul>
-
-<h1>Building EPICS extensions</h1>
-<p>
-Many extensions build and run properly on OS X.  To build and run medm, first
-obtain the X11 run-time and developer packages from Apple and the OpenMotif3
-package from Fink.
-
-<h1>Objective-C and AppleScript</h1>
-<p>
-Code written in Objective-C can be included in host or IOC applications.
-Here are a couple of short Objective-C examples which can be used to send
-AppleScript events to other applications on the OS X machine.
-
-<pre>
-/*
- * exampleAppleScriptRecord.m 
- *
- * Simple Objective-C/AppleScript subroutine record
- *
- * To use this record in an application:
- *
- * 1) Make the following changes to the application Makefile:
- *    - Add exampleAppleScriptRecord.m to the application SRCS.
- *    - Add -framework Foundation to the application LDFLAGS.
- * 2) Add the following line to the application database description:
- *      registrar(registerExampleAppleScript)
- * 3) Add a record to the application database:
- *      record(sub,"setVolume")
- *      {
- *          field(SNAM,"exampleAppleScriptProcess")
- *      }
- */
-#import &lt;Foundation/Foundation.h&gt;
-#include &lt;registryFunction.h&gt;
-#include &lt;subRecord.h&gt;
-#include &lt;alarm.h&gt;
-#include &lt;errlog.h&gt;
-#include &lt;recGbl.h&gt;
-#include &lt;epicsExport.h&gt;
-
-/*
- * Shim between EPICS and NSAppleScript class.
- */
-static long
-exampleAppleScriptProcess(struct subRecord *psub)
- {
-    NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init];
-    NSDictionary *err;
-    NSAppleScript *nsa;
-    
-    nsa = [[NSAppleScript alloc] initWithSource:[NSString stringWithFormat:
-                @"tell application \"Finder\" to set volume %g\n", psub-&gt;a]];
-    if ([nsa executeAndReturnError:&amp;err] == nil) {
-        errlogPrintf("Failed to run AppleScript: %s\n",
-                        [[err objectForKey:NSAppleScriptErrorMessage] cString]);
-        recGblSetSevr(psub, SOFT_ALARM, INVALID_ALARM);
-    }
-    [nsa release];
-    [pool release];
-    return 0;
-}
-
-static registryFunctionRef subRef[] = {
-    {"exampleAppleScriptProcess",(REGISTRYFUNCTION)exampleAppleScriptProcess}
-};
-
-static void registerExampleAppleScript(void)
-{
-    registryFunctionRefAdd(subRef,NELEMENTS(subRef));
-}
-epicsExportRegistrar(registerExampleAppleScript);
-
-
-==============================================================================
-/*
- * runAppleScript.m 
- *
- * Simple Objective-C/AppleScript shim to allow EPICS application to
- * send arbitrary AppleScript messages to other applications.
- *
- * To use this subroutine in an application make the following
- * changes to the application Makefile:
- * - Add runAppleScript.m to the application SRCS.
- * - Add -framework Foundation to the application LDFLAGS.
- */
-#import &lt;Foundation/Foundation.h&gt;
-#include &lt;errlog.h&gt;
-
-int
-runAppleScript(const char *format, ...)
-{
-    NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init];
-    NSString *script;
-    NSMutableDictionary *err;
-    NSAppleScript *nsa;
-    va_list args;
-    int ret = 0;
-    
-    va_start(args, format);
-    script = [[NSString alloc] initWithFormat:
-                            [NSString stringWithCString:format] arguments:args];
-    va_end(args);
-    err = [NSMutableDictionary dictionaryWithCapacity:10];
-    nsa = [[NSAppleScript alloc] initWithSource:script];
-    if ([nsa executeAndReturnError:&amp;err] == nil) {
-        errlogPrintf("Failed to run AppleScript: %s\n",
-                        [[err objectForKey:NSAppleScriptErrorMessage] cString]);
-        ret = -1;
-    }
-    [script release];
-    [nsa release];
-    [pool release];
-    return ret;
-}
-</pre>
-</body>
-</html>

documentation/README.md

@@ -1,28 +1,28 @@
-# Installation Instructions {#install}
+# Installation Instructions
 
-## EPICS Base Release 7.0.3.1
+## EPICS Base Release 3.15.x
 
 -----
 
 ### Table of Contents
 
-  - [What is EPICS base?](#0_0_1)
-  - [What is new in this release?](#0_0_2)
-  - [Copyright](#0_0_3)
-  - [Supported platforms](#0_0_4)
-  - [Supported compilers](#0_0_5)
-  - [Software requirements](#0_0_6)
-  - [Host system storage requirements](#0_0_7)
-  - [Documentation](#0_0_8)
-  - [Directory Structure](#0_0_10)
-  - [Build related components](#0_0_11)
-  - [Building EPICS base (Unix and Win32)](#0_0_12)
-  - [Example application and extension](#0_0_13)
-  - [Multiple host platforms](#0_0_14)
+  - [What is EPICS base?](#what-is-epics-base?)
+  - [What is new in this release?](#what-is-new-in-this-release?)
+  - [Copyright](#copyright)
+  - [Supported platforms](#supported-platforms)
+  - [Supported compilers](#supported-compilers)
+  - [Software requirements](#software-requirements)
+  - [Host system storage requirements](#host-system-storage-requirements)
+  - [Documentation](#documentation)
+  - [Directory Structure](#directory-structure)
+  - [Site-specific build configuration](#site-specific-build-configuration)
+  - [Building EPICS base](#building-epics-base)
+  - [Example application and extension](#example-application-and-extension)
+  - [Multiple host platforms](#multiple-host-platforms)
 
 -----
 
-### <span id="0_0_1">What is EPICS base?</span>
+### What is EPICS base?
 
 The Experimental Physics and Industrial Control Systems (EPICS) is an
 extensible set of software components and tools with which application
@@ -34,17 +34,17 @@ function. EPICS base allows an arbitrary number of target systems,
 IOCs (input/output controllers), and host systems, OPIs (operator
 interfaces) of various types.
 
-### <span id="0_0_2">What is new in this release?</span>
+### What is new in this release?
 
-Please check the `RELEASE_NOTES` file in the distribution for
+Please check the `documentation/RELEASE_NOTES.md` file for
 description of changes and release migration details.
 
-### <span id="0_0_3">Copyright</span>
+### Copyright
 
-Please review the LICENSE file included in the distribution for legal
-terms of usage.
+Please review the `LICENSE` file included in the distribution for
+legal terms of usage.
 
-### <span id="0_0_4">Supported platforms</span>
+### Supported platforms
 
 The list of platforms supported by this version of EPICS base is given
 in the `configure/CONFIG_SITE` file. If you are trying to build EPICS
@@ -55,7 +55,7 @@ base/configure/os/directory. You can start by copying existing
 configuration files in the configure/os directory and then make
 changes for your new platforms.
 
-### <span id="0_0_5">Supported compilers</span>
+### Supported compilers
 
 This version of EPICS base has been built and tested using the host
 vendor's C and C++ compilers, as well as the GNU gcc and g++
@@ -64,167 +64,187 @@ targets. You may need the C and C++ compilers to be in your search
 path to do EPICS builds; check the definitions of CC and CCC in
 `base/configure/os/CONFIG.<host>.<host>` if you have problems.
 
-### <span id="0_0_6">Software requirements</span>
+### Software requirements
 
-**GNU make**
-You must use GNU make, gnumake, for any EPICS builds. Set your path so
-that a gnumake version 3.81 or later is available.
+#### GNU make
+
+You must use the GNU version of `make` for EPICS builds. Set your path
+so that version 3.81 or later is available (4.0 or later on Windows).
+
+#### Perl
 
-**Perl**
 You must have Perl version 5.8.1 or later installed. The EPICS
 configuration files do not specify the perl full pathname, so the perl
 executable must be found through your normal search path.
 
-**Unzip and tar (Winzip on WIN32 systems)**
+#### Unzip and tar (Winzip on WIN32 systems)
+
 You must have tools available to unzip and untar the EPICS base
 distribution file.
 
-**Target systems**
+#### Target systems
+
 EPICS supports IOCs running on embedded platforms such as VxWorks and
 RTEMS built using a cross-compiler, and also supports soft IOCs
 running as processes on the host platform.
 
-**vxWorks**
-You must have vxWorks 6.8 or later installed if any of your target
-systems are vxWorks systems; the C++ compiler from older versions cannot
-compile recently developed code. The vxWorks installation provides the
+#### vxWorks
+
+You must have vxWorks 5.5.x or 6.x installed if any of your target
+systems are vxWorks systems; the C++ compiler for vxWorks 5.4 is now
+too old to support. The vxWorks installation provides the
 cross-compiler and header files needed to build for these targets. The
 absolute path to and the version number of the vxWorks installation
 must be set in the `base/configure/os/CONFIG_SITE.Common.vxWorksCommon`
 file or in one of its target-specific overrides.
 
-Consult the [vxWorks 6.x](https://epics.anl.gov/base/vxWorks6.php) EPICS
-web pages about and the vxWorks documentation for information about
-configuring your vxWorks operating system for use with EPICS.
+Consult the [vxWorks 5.x](https://epics.anl.gov/base/tornado.php) or
+[vxWorks 6.x](https://epics.anl.gov/base/vxWorks6.php) EPICS web pages
+about and the vxWorks documentation for information about configuring
+your vxWorks operating system for use with EPICS.
 
-**RTEMS**
-For RTEMS targets, you need RTEMS core and toolset version 4.9.x or
-4.10.x (4.11 or 5.x are not yet supported).
+#### RTEMS
 
-**GNU readline or Tecla library**
-GNU readline and Tecla libraries can be used by the IOC shell to
-provide command line editing and command line history recall and edit.
-GNU readline (or Tecla library) must be installed on your target
-system when `COMMANDLINE_LIBRARY` is set to READLINE (or TECLA) for
-that target. EPICS (EPICS shell) is the default specified in
-`CONFIG_COMMON`. A READLINE override is defined for linux-x86 in the
-EPICS distribution. Comment out `COMMANDLINE_LIBRARY=READLINE` in
-`configure/os/CONFIG_SITE.Common.linux-x86` if readline is not
-installed on linux-x86. Command-line editing and history will then be
-those supplied by the os. On vxWorks the ledLib command-line input
-library is used instead.
+For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
+4.10.x. RTEMS 5 and above are only supported in EPICS 7.0.6 or later.
 
-### <span id="0_0_7">Host system storage requirements</span>
+#### Command Line Editing
 
-The compressed tar file is approximately 1.6 MB in size. The
+
+GNU readline and other similar libraries can be used by the IOC shell
+to provide command line editing and command line history recall. The
+GNU readline development package (or Apple's emulator on macOS) must
+be installed for a target when its build configuration variable
+`COMMANDLINE_LIBRARY` is set to `READLINE`. The default specified in
+`CONFIG_COMMON` is `EPICS`, but most linux target builds can detect if
+readline is available and will then use it. RTEMS targets may be
+configured to use `LIBTECLA` if available, and on vxWorks the OS's
+ledLib line-editing library is normally used.
+
+### Host system storage requirements
+
+The compressed tar file is approximately 1.7 MB in size. The
 distribution source tree takes up approximately 12 MB. Each host
-target will need around 40 MB for build files, and each cross-compiled
-target around 20 MB.
+target will need around 50 MB for build files, and each cross-compiled
+target around 30 MB.
 
-### <span id="0_0_8">Documentation</span>
+### Documentation
 
 EPICS documentation is available through the [EPICS
 website](https://epics.anl.gov/) at Argonne.
 
 Release specific documentation can also be found in the
-base/documentation directory of the distribution.
+`base/documentation` directory of the distribution.
 
-### <span id="0_0_10">Directory Structure</span>
+### Directory Structure
 
-#### Distribution directory structure:
+#### Distribution directory structure
 
 ```
-        base                    Root directory of the base distribution
-        base/configure          Operating system independent build config files
-        base/configure/os       Operating system dependent build config files
-        base/documentation      Distribution documentation
-        base/src                Source code in various subdirectories
-        base/startup            Scripts for setting up path and environment
+    base                Root directory of the distribution
+    base/configure      Build rules and OS-independent config files
+    base/configure/os   OS-dependent build config files
+    base/documentation  Distribution documentation
+    base/src            Source code in various subdirectories
+    base/startup        Scripts for setting up path and environment
 ```
 
-#### Install directories created by the build:
+#### Directories created by the build
+
+These are created in the root directory of the installation (`base`
+above) or under the directory pointed to by the `INSTALL_LOCATION`
+configuration variable if that has been set.
 
 ```
-        bin                     Installed scripts and executables in subdirs
-        cfg                     Installed build configuration files
-        db                      Installed data bases
-        dbd                     Installed data base definitions
-        doc                     Installed documentation files
-        html                    Installed html documentation
-        include                 Installed header files
-        include/os              Installed os specific header files in subdirs
-        include/compiler        Installed compiler-specific header files
-        lib                     Installed libraries in arch subdirectories
-        lib/perl                Installed perl modules
-        templates               Installed templates
+    bin               Installed scripts and executables in subdirs
+    cfg               Installed build configuration files
+    db                Installed database files
+    dbd               Installed database definition files
+    html              Installed html documentation
+    include           Installed header files
+    include/os        Installed OS-specific header files in subdirs
+    include/compiler  Installed compiler-specific header files
+    lib               Installed libraries in arch subdirectories
+    lib/perl          Installed perl modules
+    templates         Installed templates
 ```
 
-### <span id="0_0_11">Build related components</span>
+#### `base/documentation` Directory
 
-#### base/documentation directory - contains setup, build, and install documents
+This contains documents on how to setup, build, and install EPICS.
 
 ```
-        README.md            Instructions for setup and building epics base
-        README.darwin.html   Installation notes for Mac OS X (Darwin)
-        RELEASE_NOTES.html   Notes on release changes
-        KnownProblems.html   List of known problems and workarounds
+    README.md           This file
+    RELEASE_NOTES.md    Notes on release changes
+    KnownProblems.html  List of known problems and workarounds
 ```
 
-#### base/startup directory - contains scripts to set environment and path
+#### `base/startup` Directory
+
+This contains several example scripts that show how to set up the
+build environment and PATH for using EPICS. Sites would usually copy and/or modify these files as appropriate for their environment; they are not used by the build system at all.
 
 ```
-        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
-        unix.csh            C shell script to set path and env variables
-        unix.sh             Bourne shell script to set path and env variables
-        win32.bat           Bat file example to configure win32-x86 target
-        windows.bat         Bat file example to configure windows-x64 target
+    EpicsHostArch  Shell script to set EPICS_HOST_ARCH env variable
+    unix.csh       C shell script to set path and env variables
+    unix.sh        Bourne shell script to set path and env variables
+    win32.bat      Bat file example to configure win32-x86 target
+    windows.bat    Bat file example to configure windows-x64 target
 ```
 
-#### base/configure directory - contains build definitions and rules
+#### `base/configure` directory
+
+This contains build-system files providing definitions and rules
+required by GNU Make to build EPICS. Users should only need to modify the `CONFIG_SITE` files to configure the EPICS build.
 
 ```
-        CONFIG                Includes configure files and allows variable overrides
-        CONFIG.CrossCommon    Cross build definitions
-        CONFIG.gnuCommon      Gnu compiler build definitions for all archs
-        CONFIG_ADDONS         Definitions for <osclass> and DEFAULT options
-        CONFIG_APP_INCLUDE
-        CONFIG_BASE           EPICS base tool and location definitions
-        CONFIG_BASE_VERSION   Definitions for EPICS base version number
-        CONFIG_COMMON         Definitions common to all builds
-        CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_FILE_TYPE
-        CONFIG_SITE           Site specific make definitions
-        CONFIG_SITE_ENV       Site defaults for EPICS environment variables
-        MAKEFILE              Installs CONFIG* RULES* creates
-        RELEASE               Location of external products
-        RULES                 Includes appropriate rules file
-        RULES.Db              Rules for database and database definition files
-        RULES.ioc             Rules for application iocBoot/ioc* directory
-        RULES_ARCHS           Definitions and rules for building architectures
-        RULES_BUILD           Build and install rules and definitions
-        RULES_DIRS            Definitions and rules for building subdirectories
-        RULES_EXPAND
-        RULES_FILE_TYPE
-        RULES_TARGET
-        RULES_TOP             Rules specific to a <top> dir (uninstall and tar)
-        Sample.Makefile       Sample makefile with comments
+    CONFIG               Main entry point for building EPICS
+    CONFIG.CrossCommon   Cross build definitions
+    CONFIG.gnuCommon     Gnu compiler build definitions for all archs
+    CONFIG_ADDONS        Definitions for <osclass> and DEFAULT options
+    CONFIG_APP_INCLUDE
+    CONFIG_BASE          EPICS base tool and location definitions
+    CONFIG_BASE_VERSION  Definitions for EPICS base version number
+    CONFIG_COMMON        Definitions common to all builds
+    CONFIG_ENV           Definitions of EPICS environment variables
+    CONFIG_FILE_TYPE
+    CONFIG_SITE          Site specific make definitions
+    CONFIG_SITE_ENV      Site defaults for EPICS environment variables
+    MAKEFILE             Installs CONFIG* RULES* creates
+    RELEASE              Location of external products
+    RULES                Includes appropriate rules file
+    RULES.Db             Rules for database and database definition files
+    RULES.ioc            Rules for application iocBoot/ioc* directory
+    RULES_ARCHS          Definitions and rules for building architectures
+    RULES_BUILD          Build and install rules and definitions
+    RULES_DIRS           Definitions and rules for building subdirectories
+    RULES_EXPAND
+    RULES_FILE_TYPE
+    RULES_TARGET
+    RULES_TOP            Rules specific to a <top> dir only
+    Sample.Makefile      Sample makefile with comments
 ```
 
-#### base/configure/os directory - contains os-arch specific definitions
+#### `base/configure/os` Directory
+
+Files in here provide definitions that are shared by or specific to particular host and/or target architectures. Users should only need to modify the `CONFIG_SITE` files in this directory to configure the EPICS build.
 
 ```
-        CONFIG.<host>.<target>      Specific host-target build definitions
-        CONFIG.Common.<target>      Specific target definitions for all hosts
-        CONFIG.<host>.Common        Specific host definitions for all targets
-        CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
-        CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
-        CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
-        CONFIG_SITE.<host>.<target> Site specific host-target definitions
-        CONFIG_SITE.Common.<target> Site specific target defs for all hosts
-        CONFIG_SITE.<host>.Common   Site specific host defs for all targets
+    CONFIG.<host>.<target>            Definitions for a specific host-target combination
+    CONFIG.Common.<target>            Definitions for a specific target, any host
+    CONFIG.<host>.Common              Definitions for a specific host, any target
+    CONFIG.UnixCommon.Common          Definitions for Unix hosts, any target
+    CONFIG.Common.UnixCommon          Definitions for Unix targets, any host
+    CONFIG.Common.RTEMS               Definitions for all RTEMS targets, any host
+    CONFIG.Common.vxWorksCommon       Definitions for all vxWorks targets, any host
+    CONFIG_SITE.<host>.<target>       Local settings for a specific host-target combination
+    CONFIG_SITE.Common.<target>       Local settings for a specific target, any host
+    CONFIG_SITE.<host>.Common         Local settings for a specific host, any target
+    CONFIG_SITE.Common.RTEMS          Local settings for all RTEMS targets, any host
+    CONFIG_SITE.Common.vxWorksCommon  Local settings for all vxWorks targets, any host
 ```
 
-### <span id="0_0_12">Building EPICS base (Unix and Win32)</span>
+### Building EPICS base
 
 #### Unpack file
 
@@ -236,7 +256,7 @@ systems.
 Files in the base/startup directory have been provided to help set
 required path and other environment variables.
 
-* `EPICS_HOST_ARCH`
+* **`EPICS_HOST_ARCH`**
 Before you can build or use EPICS R3.15, the environment variable
 `EPICS_HOST_ARCH` must be defined. A perl script EpicsHostArch.pl in
 the base/startup directory has been provided to help set
@@ -249,65 +269,66 @@ compilers on a solaris host or "-mingw" for MinGW c/c++ compilers on
 a WIN32 host). See `configure/CONFIG_SITE` for a list of supported
 `EPICS_HOST_ARCH` values.
 
-* `PERLLIB`
-On WIN32, some versions of Perl require that the environment
-variable PERLLIB be set to &lt;perl directory location>.
+* **`PATH`**
+As already mentioned, you must have the `perl` executable and you may
+need C and C++ compilers in your search path. When building base you
+must have `echo` in your search path. For Unix host builds you will
+also need `cp`, `rm`, `mv`, and `mkdir` in your search path. Some Unix
+systems may also need `ar` and `ranlib`, and the C/C++ compilers may
+require `as` and `ld` in your path. On Solaris systems you need
+`uname` in your path.
 
-* `PATH`
-As already mentioned, you must have the perl executable and you may
-need C and C++ compilers in your search path. For building base you
-also must have echo in your search path. For Unix host builds you
-also need ln, cpp, cp, rm, mv, and mkdir in your search path and
-/bin/chmod must exist. On some Unix systems you may also need ar and
-ranlib in your path, and the C compiler may require as and ld in
-your path. On solaris systems you need uname in your path.
+* **`LD_LIBRARY_PATH`**
+R3.15 shared libraries and executables normally contain the full path
+to any libraries they require, so setting this variable is not usually
+necessary. However, if you move the EPICS installation to a new
+location after building it then in order for the shared libraries to
+be found at runtime it may need to be set, or some equivalent
+OS-specific mechanism such as `/etc/ld.so.conf` on Linux must be used.
+Shared libraries are now built by default on all Unix type hosts.
 
-* `LD_LIBRARY_PATH`
-R3.15 shared libraries and executables normally contain the full
-path to any libraries they require. However, if you move the EPICS
-files or directories from their build-time location then in order
-for the shared libraries to be found at runtime `LD_LIBRARY_PATH`
-must include the full pathname to
-`$(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)` when invoking
-executables, or some equivalent OS-specific mechanism (such as
-/etc/ld.so.conf on Linux) must be used. Shared libraries are now
-built by default on all Unix type hosts.
+### Site-specific build configuration
 
-#### Do site-specific build configuration
+#### Site configuration
 
-**Site configuration**
-To configure EPICS, you may want to modify the default definitions
-in the following files:
+To configure EPICS, you may want to modify some values set in the
+following files:
 
 ```
-        configure/CONFIG_SITE      Build choices. Specify target archs.
-        configure/CONFIG_SITE_ENV  Environment variable defaults
-        configure/RELEASE          TORNADO2 full path location
+    configure/CONFIG_SITE      Build settings. Specify target archs.
+    configure/CONFIG_SITE_ENV  Environment variable defaults
 ```
 
-**Host configuration**
-To configure each host system, you may override the default
-definitions by adding a new file in the configure/os directory with
-override definitions. The new file should have the same name as the
-distribution file to be overridden except with CONFIG in the name
-changed to `CONFIG_SITE`.
+#### Host configuration
+
+To configure each host system, you can override the default
+definitions by adding a new settings file (or editing an existing
+settings file) in the `configure/os` directory with your override
+definitions. The settings file has the same name as the definitions
+file to be overridden except with `CONFIG` in the name changed to
+`CONFIG_SITE`.
 
 ```
-        configure/os/CONFIG.<host>.<host>      Host build settings
-        configure/os/CONFIG.<host>.Common      Host common build settings
+    configure/os/CONFIG.<host>.<host>       Host self-build definitions
+    configure/os/CONFIG.<host>.Common       Host common build definitions
+    configure/os/CONFIG_SITE.<host>.<host>  Host self-build overrides
+    configure/os/CONFIG_SITE.<host>.Common  Host common build overrides
 ```
 
-**Target configuration**
+#### Target configuration
+
 To configure each target system, you may override the default
-definitions by adding a new file in the configure/os directory with
-override definitions. The new file should have the same name as the
-distribution file to be overridden except with CONFIG in the name
-replaced by `CONFIG_SITE`. This step is necessary even if the host
-system is the only target system.
+definitions by adding a new settings file (or editing an existing
+settings file) in the `configure/os` directory with your override
+definitions. The settings file has the same name as the definitions
+file to be overridden except with `CONFIG` in the name changed to
+`CONFIG_SITE`.
 
 ```
-        configure/os/CONFIG.Common.<target>     Target common settings
-        configure/os/CONFIG.<host>.<target>     Host-target settings
+    configure/os/CONFIG.Common.<target>       Target common definitions
+    configure/os/CONFIG.<host>.<target>       Host-target definitions
+    configure/os/CONFIG_SITE.Common.<target>  Target common overrides
+    configure/os/CONFIG_SITE.<host>.<target>  Host-target overrides
 ```
 
 #### Build EPICS base
@@ -317,24 +338,29 @@ by issuing the following commands in the distribution's root
 directory (base):
 
 ```
-        gnumake clean uninstall
-        gnumake
+    make distclean
+    make
 ```
 
-The command "gnumake clean uninstall" will remove all files and
-directories generated by a previous build. The command "gnumake"
+The command `make distclean` will remove all files and
+directories generated by a previous build. The command `make`
 will build and install everything for the configured host and
 targets.
 
-It is recommended that you do a "gnumake clean uninstall" at the
+It is recommended that you do a `make distclean` at the
 root directory of an EPICS directory structure before each complete
 rebuild to ensure that all components will be rebuilt.
 
-### <span id="0_0_13">Example application and extension</span>
+In some cases GNU Make may have been installed as `gmake` or
+`gnumake`, in which case the above commands will have to be adjusted
+to match.
 
-A perl tool, makeBaseApp.pl is included in the distribution file. This
-script will create a sample application that can be built and then
-executed to try out this release of base.
+### Example application and extension
+
+A perl tool `makeBaseApp.pl` and several template applications are
+included in the distribution. This script instantiates the selected
+template into an empty directory to provide an example application
+that can be built and then executed to try out this release of base.
 
 Instructions for building and executing the 3.15 example application
 can be found in the section "Example Application" of Chapter 2,
@@ -347,26 +373,30 @@ application as a host-based IOC, you will be able to quickly implement
 a complete EPICS system and be able to run channel access clients on
 the host system.
 
-A perl script, makeBaseExt.pl, is included in the distribution file.
-This script will create a sample extension that can be built and
-executed. The makeBaseApp.pl and makeBaseExt.pl scripts are installed
-into the install location `bin/<hostarch>` directory during the base
-build.
+Another perl script `makeBaseExt.pl` is also included in the
+distribution file for creating an extensions tree and sample
+application that can also be built and executed. Both these scripts
+are installed into the install location `bin/<hostarch>` directory
+during the base build.
 
-### <span id="0_0_14">Multiple host platforms</span>
+### Multiple host platforms
 
 You can build using a single EPICS directory structure on multiple
 host systems and for multiple cross target systems. The intermediate
 and binary files generated by the build will be created in separate
 subdirectories and installed into the appropriate separate host/target
-install directories. EPICS executables and perl scripts are installed
-into the `$(INSTALL_LOCATION)/bin/<arch>` directories. Libraries are
-installed into $`(INSTALL_LOCATION)/lib/<arch>`. The default
-definition for `$(INSTALL_LOCATION)` is `$(TOP)` which is the root
-directory in the distribution directory structure, base. Created
-object files are stored in `O.<arch>` source subdirectories, This
-allows objects for multiple cross target architectures to be
-maintained at the same time. To build EPICS base for a specific
+install directories.
+
+EPICS executables and perl scripts are installed into the
+`$(INSTALL_LOCATION)/bin/<arch>` directories. Libraries are installed
+into $`(INSTALL_LOCATION)/lib/<arch>`. The default definition for
+`$(INSTALL_LOCATION)` is `$(TOP)` which is the root directory in the
+distribution directory structure, `base`. Intermediate object files
+are stored in `O.<arch>` source subdirectories during the build
+process, to allow objects for multiple cross target architectures
+to be maintained at the same time.
+
+To build EPICS base for a specific
 host/target combination you must have the proper host/target C/C++
 cross compiler and target header files and the base/configure/os
 directory must have the appropriate configure files.

documentation/RecordReference.md

@@ -1,9 +1,12 @@
-# Record Reference Documentation  {#recordrefmanual}
+# Record Reference Documentation
 
-The following documentation for the record types and menus include with Base was
+The documentation below for the record types and menus included with Base was
 converted from the old EPICS Wiki pages and updated. This list only includes the
-record types supplied with Base.
+record types supplied with Base. The first two links below are to an external
+website where these original reference chapters are now being published.
 
+* [Introduction to EPICS](https://docs.epics-controls.org/en/latest/guides/EPICS_Intro.html)
+* [Process Database Concepts](https://docs.epics-controls.org/en/latest/guides/EPICS_Process_Database_Concepts.html)
 * [Fields Common to All Record Types](dbCommonRecord.html)
 * [Fields Common to Input Record Types](dbCommonInput.html)
 * [Fields Common to Output Record Types](dbCommonOutput.html)
@@ -24,8 +27,6 @@ record types supplied with Base.
 * [Event Record (event)](eventRecord.html)
 * [Fanout Record (fanout)](fanoutRecord.html)
 * [Histogram Record (histogram)](histogramRecord.html)
-* [64bit Integer Input Record (int64in)](int64inRecord.html)
-* [64bit Integer Output Record (int64out)](int64outRecord.html)
 * [Long Input Record (longin)](longinRecord.html)
 * [Long Output Record (longout)](longoutRecord.html)
 * [Long String Input Record (lsi)](lsiRecord.html)
@@ -35,7 +36,7 @@ record types supplied with Base.
 * [Multi-Bit Binary Output Direct Record (mbboDirect)](mbboDirectRecord.html)
 * [Multi-Bit Binary Output Record (mbbo)](mbboRecord.html)
 * [Permissive Record (permissive)](permissiveRecord.html)
-* [Printf Record (prinf)](printfRecord.html)
+* [Printf Record (printf)](printfRecord.html)
 * [Select Record (sel)](selRecord.html)
 * [Sequence Record (seq)](seqRecord.html)
 * [State Record (state)](stateRecord.html)
@@ -53,6 +54,9 @@ record types supplied with Base.
 * [Field Type Menu](menuFtype.html)
 * [Invalid Value Output Action Menu](menuIvoa.html)
 * [Output Mode Select Menu](menuOmsl.html)
+* [Process at iocInit Menu](menuPini.html)
+* [Post Monitors Menu](menuPost.html)
+* [Priority Menu](menuPriority.html)
 * [Scan Menu](menuScan.html)
 * [Simulation Mode Menu](menuSimm.html)
 * [Yes/No Menu](menuYesNo.html)
@@ -60,9 +64,8 @@ record types supplied with Base.
 ## Corrections and Updates
 
 Corrections to these documents can be submitted as patch files to the EPICS core
-developers, or as merge requests or pull requests to the 7.0 branch of Base.
-The document sources can be found in the `modules/database/src/std/rec` and
-`modules/database/src/ioc/db` directories in files with extension `.dbd.pod`.
-The documentation source format is a combination of the EPICS DBD file format
-with an extended version of Perl's POD (plain old documentation); run `perldoc
-pod` for details of POD.
+developers, or as merge requests or pull requests to the 3.15 branch of Base.
+The document sources can be found in the `src/std/rec` and `src/ioc/db`
+directories in files with extension `.dbd.pod`. The documentation source format
+is a combination of the EPICS DBD file format with an extended version of Perl's
+POD (plain old documentation); run `perldoc pod` for details of POD.

documentation/ReleaseChecklist.html

@@ -33,37 +33,29 @@
 <h1>EPICS Base Release Procedures &amp; Checklist</h1>
 
 <p>This document describes the procedures and provides a checklist of tasks
-that should be performed when creating production releases of EPICS Base.</p>
+that should be performed when creating new releases of EPICS Base.</p>
 
 <h3>The Release Process</h3>
 
-<h4>Full Process</h4>
-
 <p>The version released on the Feature Freeze date is designated the first
-pre-release, <tt>-pre1</tt>. The first release candidate <tt>-rc1</tt> is the
-first version that has undergone testing by the developers and has shown no
-problems that must be fixed before release. New versions should be made at about
-2-weekly intervals after the <tt>-pre1</tt> release, and designated as either
-pre-release or release candidate versions by the Release Manager. Release
-candidates are announced to the whole community via the tech-talk mailing list,
-pre-releases are announced to to the developers via the core-talk list. After a
-release candidate has been available for 2 weeks without any new problems being
-reported or major changes having to be committed, the final release can be
-made.</p>
-
-<h4>Short Process for Patch Releases</h4>
-
-<p>The Patch Release date and its scope are agreed upon a few weeks ahead of the
-release. If no blocking issues are raised, the release is made by the Release
-Manager on or as soon as possible after that date, following the steps below
-starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
+pre-release, <tt>-pre1</tt>. The first Release Candidate <tt>-rc1</tt> is the
+first version that has undergone widespread testing and which has no known
+problems in it that are slated to be fixed in this release. New versions should
+be made at 2-weekly intervals during the testing and debugging period, and will
+be designated as either pre-release versions or Release Candidates by the
+Release Manager. After a Release Candidate has been available to the whole
+community for testing for at least a week without any additional problems being
+reported or significant changes being committed, the branch can be designated as
+the final release version.</p>
 
 <h3>Roles</h3>
 
-<p>The following roles are used below:</p>
+<p>The following roles are required. The individuals named here have have been
+responsible for these tasks in the past and are expected to continue in the
+relevent roles unless the Release Manager designates otherwise:</p>
 
 <dl>
-  <dt><strong>Release Manager</strong> ()</dt>
+  <dt><strong>Release Manager</strong> (Ralph Lange)</dt>
     <dd>Responsible for managing and tagging the release</dd>
   <dt><strong>Platform Developers</strong> (optional)</dt>
     <dd>Responsible for individual operating system platforms</dd>
@@ -73,7 +65,6 @@ starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
     <dd>Responsible for the EPICS website</dd>
 </dl>
 
-<form>
 <table border="1" width="100%">
   <tbody>
     <tr>
@@ -88,7 +79,7 @@ starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Email all developers about the upcoming release and ask for a list
-        of remaining tasks that must be finished.</td>
+        of remaining jobs that must be finished.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -121,92 +112,92 @@ starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Review and update this checklist for the upcoming release.</td>
+      <td>Review and update this document for the upcoming release.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Create a release milestone on Launchpad. If a target release date is
-        known set "Date Targeted" to the expected release date. Note that
-        pre-release and release-candidate versions should not get Launchpad
-        milestones, only the final release.</td>
+      <td>Create a release milestone on Launchpad if necessary and set the
+        expected release date. Note that pre-release and release-candidate
+        versions do not appear on Launchpad, only the final release.</td>
       </tr>
     <tr>
       <th colspan="3">Creating pre-release and release-candidate versions</th>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
-      <!-- Submodules... -->
       <td>Edit and commit changes to the EPICS version number file
         configure/CONFIG_BASE_VERSION.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Tag the module in Git, using these tag conventions:
         <ul>
           <li>
-            <tt>R7.0.4.1-pre<i>n</i></tt>
+            <tt>R3.15.9-pre1</tt>
             &mdash; pre-release tag
             </li>
           <li>
-            <tt>R7.0.4.1-rc<i>n</i></tt>
+            <tt>R3.15.9-rc1</tt>
             &mdash; release candidate tag
             </li>
-          </ul>
+        </ul>
         <blockquote><tt>
-          cd base-7.0<br />
-          git tag -m 'ANJ: Tagged for 7.0.4.1-rc1' R7.0.4.1-rc1
+          cd base-3.15<br />
+          git tag -m 'ANJ: Tagged for 3.15.9-rc1' R3.15.9-rc1
           </tt></blockquote>
-        Note that submodules must <em>not</em> be tagged with the version used
-        for the top-level, they each have their own separate version numbers
-        that are only tagged at the final release.</td>
+        </td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Export the tagged version into a tarfile. The <tt>make-tar.sh</tt>
         script generates a gzipped tarfile directly from the tag, excluding the
         files and directories that are only used for continuous integration:
         <blockquote><tt>
-          cd base-7.0<br />
-          ./.tools/make-tar.sh R7.0.4.1-rc1 base-7.0.4.1-rc1.tar.gz base-7.0.4.1-rc1/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.9-rc1/ --output=base-3.15.9-rc1.tar.gz R3.15.9-rc1 configure documentation LICENSE Makefile README src startup
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-7.0.4.1-rc1.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.9-rc1.tar.gz
           </tt></blockquote>
         </td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Test the tarfile by extracting its contents and building it on at
         least one supported platform.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website and add the new files to the website Base download index
-        page.</td>
+      <td>If necessary recreate the tarfile following the instructions above.
+        Copy the tar file to the Base download area of the website</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Create or update a website subdirectory to hold the release
         documentation, and copy in selected files from the base/documentation
         and base/html directories of the tarfile.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Create or modify the webpage for the new release with links to the
         release documents and tar file. Pre-release and release-candidate
         versions should use the page and URL for the final release version
         number.</td>
       </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Website Manager</td>
+      <td>Add the new tar file to the website Base download index page.</td>
+      </tr>
     <tr>
       <th colspan="3">Testing</th>
       </tr>
@@ -242,7 +233,7 @@ starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
       <td>&nbsp;</td>
       <td>Application Developers</td>
       <td>Build external applications against this version of Base on all
-        available platforms and test as appropriate. Application code changes
+        available platforms and test as appropriate.  Application code changes
         may be necessary where the EPICS Base APIs have been modified.</td>
       </tr>
     <tr>
@@ -258,250 +249,113 @@ starting at <a href="#ReleaseApproval">Release Approval</a>.</p>
           </ul>
         </td>
       </tr>
-
     <tr>
-      <th colspan="3" id="ReleaseApproval">
-        Release Approval</th>
+      <th colspan="3">Release Approval</th>
     </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Obtain a positive <q>Ok to release</q> from all platform developers
-        once a release candidate version has gone for 2 weeks without any major
-        new issues being reported.</td>
+        once a Release Candidate version has gone a whole week without any
+        issues being reported.</td>
       </tr>
     <tr>
       <th colspan="3">Creating the final release version</th>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>
-        <p>For each external submodule in turn (assuming it has not been tagged
-          yet):</p>
-        <ol>
-          <li>Check that the module's Release Notes have been updated to cover
-            all changes; add items as necessary, and set the module version
-            number and release date if appropriate. Convert to HTML and view in
-            a browser to check the formatting:
-            <blockquote><tt>
-              cd base-7.0/modules/&lt;module&gt;/documentation<br />
-              pandoc -f gfm -t html -o RELEASE_NOTES.html RELEASE_NOTES.md
-              </tt></blockquote>
-            Commit changes (don't push yet).</li>
-
-          <li>Edit the module's release version file
-            <tt>configure/CONFIG_<i>module</i>_VERSION</tt> and its top-level
-            <tt>Doxyfile</tt>; set the <tt>DEVELOPMENT_FLAG</tt> value to 0 and
-            remove <tt>-dev</tt> from the <tt>PROJECT_NUMBER</tt> string.
-            Commit changes (don't push).</li>
-
-          <li>Tag the module:
-            <blockquote><tt>
-              git tag -m 'ANJ: Tag for EPICS 7.0.4.1' &lt;module-version&gt;
-              </tt></blockquote>
-            </li>
-
-          <li>Update the git submodule on the Base-7.0 branch to the
-            newly-tagged version, but don't commit yet:
-            <blockquote><tt>
-              cd base-7.0/modules<br />
-              git add &lt;module&gt;<br />
-              git submodule status --cached
-              </tt></blockquote>
-            </li>
-
-          <li>Edit the module's release version file
-            <tt>configure/CONFIG_<i>module</i>_VERSION</tt> and its top-level
-            <tt>Doxyfile</tt>; increment the <tt>MAINTENANCE_VERSION</tt>, set
-            the <tt>DEVELOPMENT_FLAG</tt> value to 1, and update the
-            <tt>PROJECT_NUMBER</tt> string, appending <tt>-dev</tt> to the new
-            module version number. Commit changes.</li>
-
-          <li>Push commits and the new tag to the submodule's GitHub repository:
-            <blockquote><tt>
-              cd base-7.0/modules/&lt;module&gt;<br />
-              git push --follow-tags upstream master
-              </tt></blockquote>
-            </li>
-
-          </ol>
-        <p>Commit all the submodule updates to the 7.0 branch.</p>
-        </td>
+      <td>Edit and commit changes to the EPICS version number file
+        configure/CONFIG_BASE_VERSION.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
-
-      <td>Edit the main EPICS Base version file and the built-in module version
-        files:
-        <ul>
-          <li><tt>configure/CONFIG_BASE_VERSION</tt></li>
-          <li><tt>configure/CONFIG_LIBCOM_VERSION</tt></li>
-          <li><tt>configure/CONFIG_CA_VERSION</tt></li>
-          <li><tt>configure/CONFIG_DATABASE_VERSION</tt></li>
-          </ul>
-        <p>Version numbers should be set according to the level of changes made
-          since the last release. Note that the <tt>MAINTENANCE_VERSION</tt> or
-          <tt>PATCH_LEVEL</tt> value should have been incremented after the
-          previous release tag was applied. Set all <tt>DEVELOPMENT_FLAG</tt>
-          values to 0 and <tt>EPICS_DEV_SNAPSHOT</tt> to the empty string.</p>
-        <p>Commit these changes (don't push).</p>
-        </td>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Release Manager</td>
-      <td>Tag the epics-base module in Git:
+      <td>Tag the module in Git:
         <blockquote><tt>
-          cd base-7.0<br />
-          git tag -m 'ANJ: Tagged for release' R7.0.4.1
+          cd base-3.15<br />
+          git tag -m 'ANJ: Tagged for 3.15.9' R3.15.9
           </tt></blockquote>
-        <p>Don't push these commits or the new tag to the Launchpad repository
-          yet.</p>
         </td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Edit the main EPICS Base version file and the built-in module version
-        files:
-        <ul>
-          <li><tt>configure/CONFIG_BASE_VERSION</tt></li>
-          <li><tt>configure/CONFIG_LIBCOM_VERSION</tt></li>
-          <li><tt>configure/CONFIG_CA_VERSION</tt></li>
-          <li><tt>configure/CONFIG_DATABASE_VERSION</tt></li>
-          </ul>
-        <p>Version numbers should be set for the next expected patch/maintenance
-          release by incrementing the MAINTENANCE_VERSION or PATCH_LEVEL value
-          in each file. Set all <tt>DEVELOPMENT_FLAG</tt> values to 1 and
-          <tt>EPICS_DEV_SNAPSHOT</tt> to "-DEV".</p>
-        <p>Commit these changes (don't push).</p>
-        </td>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Release Manager</td>
-      <td>Export the tagged version into a tarfile. The <tt>make-tar.sh</tt>
-        script generates a gzipped tarfile directly from the tag, excluding the
-        files and directories that are only used for continuous integration:
+      <td>Export the tagged version into a tarfile. Note that this command
+        generates a gzipped tarfile directly from the repository:
         <blockquote><tt>
-          cd base-7.0<br />
-          ./.tools/make-tar.sh R7.0.4.1 ../base-7.0.4.1.tar.gz base-7.0.4.1/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.9/ --output=base-3.15.9.tar.gz R3.15.9 configure documentation LICENSE Makefile README src startup
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          cd ..<br />
-          gpg --armor --sign --detach-sig base-7.0.4.1.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.9.tar.gz
           </tt></blockquote>
         </td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Test the tar file by extracting its contents and building it on at
-        least one supported platform. When this succeeds the commits and new git
-        tag can be pushed to the Launchpad repository:
-        <blockquote><tt>
-          git push --follow-tags upstream 7.0
-          </tt></blockquote>
-        </td>
+        least one supported platform</td>
       </tr>
     <tr>
-      <th colspan="3">Publish to epics.anl.gov</th>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website.</td>
+      <td>Upload the release tar file to the Launchpad download area.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
+      <td>Release Manager</td>
+      <td>Find all Launchpad bug reports with the status Fix Committed which
+        have been fixed in this release and mark them Fix Released.</td>
+      </tr>
+    <tr>
+      <th colspan="3">Publish and Announce it</th>
+      </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Website Manager</td>
+      <td>Copy the tar file and its <tt>.asc</tt> signature file to the Base
+        download area of the website.</td>
+      </tr>
+    <tr>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Update the website subdirectory that holds the release
         documentation, and copy in the files from the base/documentation
         directory of the tarfile.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Update the webpage for the new release with links to the release
         documents and tar file.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Add the new release tar file to the website Base download index
         page.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Link to the release webpage from other relevent areas of the
         website - update front page and sidebars.</td>
       </tr>
     <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Website Manager</td>
       <td>Add an entry to the website News page, linking to the new version
         webpage.</td>
       </tr>
-
     <tr>
-      <th colspan="3">Publish to epics-controls</th>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Website Manager</td>
-      <td>Upload the tar file and its <tt>.asc</tt> signature file to the
-        epics-controls web-server.
-        <blockquote><tt>
-          scp base-7.0.4.1.tar.gz base-7.0.4.1.tar.gz.asc epics-controls:download/base<br />
-          </tt></blockquote>
-        </td>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Website Manager</td>
-      <td>Follow instructions on
-        <a href="https://epics-controls.org/resources-and-support/documents/epics-website-documentation/adding-a-page-for-a-new-release/">
-        Add a page for a new release</a> to create a new release webpage (not
-        required for a patch release, just edit the existing page). Update the
-        TablePress "Point Releases" table and add the new download, and adjust
-        the XYZ Html Snippet for the series download.
-        </td>
-      </tr>
-
-    <tr>
-      <th colspan="3">Publish to Launchpad</th>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Website Manager</td>
-      <td>Go to the Launchpad milestone for this release. Click the Create
-        release button and add the release date. Put a URL for the release page
-        in the Release notes box, and click the Create release button. Upload
-        the tar file and its <tt>.asc</tt> signature file to the new Launchpad
-        release page.</td>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
-      <td>Release Manager</td>
-      <td>Find all Launchpad bug reports with the status Fix Committed which
-        have been fixed in this release and mark them Fix Released.</td>
-      </tr>
-
-    <tr>
-      <th colspan="3">Make Announcement</th>
-      </tr>
-    <tr>
-      <td><input type="checkbox"></td>
+      <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Announce the release on the tech-talk mailing list.</td>
       </tr>
     </tbody>
   </table>
-</form>
 </body>
 </html>

documentation/commit-gh.sh

@@ -1,45 +0,0 @@
-#!/bin/sh
-set -e -x
-# Usage: commit-gh <sub-directory-prefix> <files...>
-#
-# Creates a commit containing only the files in the sub-directory provided as an argument
-#
-# Does not disturb the working copy or index
-
-prefix="$1"
-shift
-
-# Commit to this branch
-BRANCH=refs/heads/gh-pages
-
-# Use the main branch description as the gh-pages commit message
-MSG=`git describe --tags --always`
-
-# Scratch space
-TDIR=`mktemp -d -p $PWD`
-
-# Automatic cleanup of scratch space
-trap 'rm -rf $TDIR' INT TERM QUIT EXIT
-
-export GIT_INDEX_FILE="$TDIR/index"
-
-# Add listed files to a new (empty) index
-git update-index --add "$@"
-
-# Write the index into the repo, get tree hash
-TREE=`git write-tree --prefix="$prefix"`
-
-echo "TREE $TREE"
-git cat-file -p $TREE
-
-# Create a commit with our new tree
-# Reference current branch head as parent (if any)
-CMT=`git commit-tree -m "$MSG" $TREE`
-
-echo "COMMIT $CMT"
-git cat-file -p $CMT
-
-# Update the branch with the new commit tree hash
-git update-ref $BRANCH $CMT
-
-echo "Done"

documentation/mainpage.dox

@@ -1,16 +0,0 @@
-/**
-@mainpage EPICS Base
-
-Documentation index
-
-@ul
-@li @ref releasenotes
-@li @ref install
-@li @ref recordrefmanual
-@li <a href="CAref.html">Channel Access Reference Manual</a>
-@li <a href="filters.html">Server Side Filters Reference</a>
-@li <a href="msi.html">msi: Macro Substitution and Include Tool</a>
-@li <a href="links.html">JSON Link Types</a>
-@li <a href="CA.html">Perl 5 Interface to Channel Access</a>
-
-*/