Set snapshot for final 7.0.2 release

Remove To Do list (which didn't get discussed).
Add stuff about submodule versions and pushing tags.
List invididual module version number files to be updated at
final release time.

.appveyor.yml

@@ -16,7 +16,7 @@ init:
   - git config --global core.autocrlf true
 
 # Set clone depth (do not fetch complete history)
-clone_depth: 2
+clone_depth: 50
 
 # Skipping commits affecting only specific files
 skip_commits:
@@ -46,8 +46,8 @@ environment:
   - TOOLCHAIN: 14.0
   - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
     TOOLCHAIN: 2017
+  - TOOLCHAIN: cygwin
   - TOOLCHAIN: mingw
-    APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
 
 # Platform: architecture
 platform:
@@ -61,19 +61,19 @@ matrix:
   - platform: x64
     TOOLCHAIN: 10.0
 
-
 #---------------------------------#
 #     building & testing          #
 #---------------------------------#
 
 install:
-  - cmd: ci/appveyor-prepare.bat
+  - cmd: git submodule update --init --recursive
+  - cmd: .ci/appveyor-prepare.bat
 
 build_script:
-  - cmd: ci/appveyor-make.bat
+  - cmd: .ci/appveyor-make.bat
 
 test_script:
-  - cmd: ci/appveyor-make.bat runtests
+  - cmd: .ci/appveyor-make.bat runtests
 
 #---------------------------------#
 #         notifications           #
@@ -81,9 +81,6 @@ test_script:
 
 notifications:
 
-  - provider: Email
-    to:
-      - core-talk@aps.anl.gov
-    on_build_success: false
-
-  - provider: GitHubPullRequest
+  - provider: Slack
+    incoming_webhook:
+      secure: RYOm3FIUYeZGjWKaeTVKwq+C3fzK54AKwbmAoECED45mex3lN+8HmrC845a6mg9xPUJ/ND51RopWVaKDD9/UzaM0SO195RQLKqUTIUafiuM=

.ci/appveyor-make.bat

@@ -1,6 +1,6 @@
 :: Universal build script for AppVeyor (https://ci.appveyor.com/)
 :: Environment:
-::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/mingw]
+::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/cygwin/mingw]
 ::     CONFIGURATION  -  determines EPICS build   [dynamic/static]
 ::     PLATFORM       -  architecture   [x86/x64]
 ::
@@ -20,17 +20,35 @@ echo [INFO] Platform: %OS%
 set "MAKEARGS=-j2 -Otarget"
 if "%APPVEYOR_REPO_BRANCH%"=="3.14" set MAKEARGS=
 
+if "%TOOLCHAIN%"=="cygwin" (
+    set "MAKE=make"
+    if "%OS%"=="64BIT" (
+        set "EPICS_HOST_ARCH=cygwin-x86_64"
+        set "INCLUDE=C:\cygwin64\include;%INCLUDE%"
+        set "PATH=C:\cygwin64\bin;%PATH%"
+        echo [INFO] Cygwin Toolchain 64bit
+    ) else (
+        set "EPICS_HOST_ARCH=cygwin-x86"
+        set "INCLUDE=C:\cygwin\include;%INCLUDE%"
+        set "PATH=C:\cygwin\bin;%PATH%"
+        echo [INFO] Cygwin Toolchain 32bit
+    )
+    echo [INFO] Compiler Version
+    gcc -v
+    goto Finish
+)
+
 if "%TOOLCHAIN%"=="mingw" (
     set "MAKE=mingw32-make"
     if "%OS%"=="64BIT" (
         set "EPICS_HOST_ARCH=windows-x64-mingw"
-        set "INCLUDE=C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\include;%INCLUDE%"
-        set "PATH=C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\bin;%PATH%"
+        set "INCLUDE=C:\tools\mingw64\include;%INCLUDE%"
+        set "PATH=C:\tools\mingw64\bin;%PATH%"
         echo [INFO] MinGW Toolchain 64bit
     ) else (
         set "EPICS_HOST_ARCH=win32-x86-mingw"
-        set "INCLUDE=C:\mingw-w64\i686-6.3.0-posix-dwarf-rt_v5-rev1\mingw32\include;%INCLUDE%"
-        set "PATH=C:\mingw-w64\i686-6.3.0-posix-dwarf-rt_v5-rev1\mingw32\bin;%PATH%"
+        set "INCLUDE=C:\tools\mingw32\include;%INCLUDE%"
+        set "PATH=C:\tools\mingw32\bin;%PATH%"
         echo [INFO] MinGW Toolchain 32bit
     )
     echo [INFO] Compiler Version

.ci/appveyor-prepare.bat

@@ -0,0 +1,70 @@
+:: Build script for AppVeyor (https://ci.appveyor.com/)
+:: Environment:
+::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/cygwin/mingw]
+::     CONFIGURATION  -  determines EPICS build  [dynamic/static, -debug]
+::     PLATFORM       -  "x86" -> use 32bit architecture
+::
+:: Prepares an Appveyor build by excuting the following steps
+::     - Set up configure\CONFIG_SITE for static vs. dynamic build
+::     - Install Cygwin / Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
+::     - Download and install Make-4.1 from EPICS download page
+
+Setlocal EnableDelayedExpansion
+
+set OS=64BIT
+if "%PLATFORM%"=="x86" set OS=32BIT
+
+echo [INFO] Platform: %OS%
+
+if "%TOOLCHAIN%"=="cygwin" (
+    echo.%CONFIGURATION% | findstr /C:"static">nul && (
+        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
+        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for static build
+    ) || (
+        echo [INFO] EPICS set up for dynamic build
+    )
+    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
+        echo HOST_OPT=NO>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for debug build
+    ) || (
+        echo [INFO] EPICS set up for optimized build
+    )
+    if "%OS%"=="64BIT" (
+        echo [INFO] Installing Cygwin 64bit and dependencies
+        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86_64.exe', 'C:\cygwin64\setup-x86_64.exe')"
+        C:\cygwin64\setup-x86_64.exe -q -P "libreadline-devel,libncursesw-devel"
+    ) else (
+        echo [INFO] Installing Cygwin 32bit and dependencies
+        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86.exe', 'C:\cygwin\setup-x86.exe')"
+        C:\cygwin\setup-x86.exe -q -P "libreadline-devel,libncursesw-devel"
+    )
+)
+
+if "%TOOLCHAIN%"=="mingw" (
+    echo.%CONFIGURATION% | findstr /C:"static">nul && (
+        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
+        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for static build
+    ) || (
+        echo [INFO] EPICS set up for dynamic build
+    )
+    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
+        echo HOST_OPT=NO>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for debug build
+    ) || (
+        echo [INFO] EPICS set up for optimized build
+    )
+    if "%OS%"=="64BIT" (
+        echo [INFO] Installing MinGW 64bit
+        cinst mingw || cinst mingw
+    ) else (
+        echo [INFO] Installing MinGW 32bit
+        cinst mingw --x86 || cinst mingw --x86
+    )
+)
+
+echo [INFO] Installing Make 4.1
+curl -fsS --retry 3 -o C:\tools\make-4.1.zip https://epics.anl.gov/download/tools/make-4.1-win64.zip
+cd \tools
+"C:\Program Files\7-Zip\7z" e make-4.1.zip

.ci/checkout-modules.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# Checkout submodules on their appropriate branches
+#
+
+git submodule foreach '\
+    git checkout `git config -f $toplevel/.gitmodules submodule.$name.branch` && \
+    git pull '

.ci/travis-build.sh

@@ -6,18 +6,9 @@ die() {
   exit 1
 }
 
-ticker() {
-  while true
-  do
-    sleep 60
-    date -R
-    [ -r "$1" ] && tail -n10 "$1"
-  done
-}
-
 CACHEKEY=1
 
-EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
+export EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
 
 [ -e configure/os/CONFIG_SITE.Common.linux-x86 ] || die "Wrong location: $PWD"
 
@@ -57,34 +48,30 @@ EOF
 fi
 
 # set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
 if [ -n "$RTEMS" ]
 then
   echo "Cross RTEMS${RTEMS} for pc386"
-  install -d /home/travis/.cache
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
-  | tar -C /home/travis/.cache -xj
+  curl -L "https://github.com/mdavidsaver/rsb/releases/download/20171203-${RTEMS}/i386-rtems${RTEMS}-trusty-20171203-${RTEMS}.tar.bz2" \
+  | tar -C / -xmj
 
   sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' configure/os/CONFIG_SITE.Common.RTEMS
   cat << EOF >> configure/os/CONFIG_SITE.Common.RTEMS
 RTEMS_VERSION=$RTEMS
-RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
+RTEMS_BASE=$HOME/.rtems
 EOF
   cat << EOF >> configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
+CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc386-qemu
 EOF
 
   # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
   echo -n "Using QEMU: "
   type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
 fi
 
 make -j2 $EXTRA
 
 if [ "$TEST" != "NO" ]
 then
-   make tapfiles
+   make -j2 tapfiles
    make -s test-results
 fi

.gitattributes

@@ -0,0 +1,5 @@
+.ci/          export-ignore
+.tools/       export-ignore
+.appveyor.yml export-ignore
+.travis.yml   export-ignore
+README        export-subst

.gitignore

@@ -7,6 +7,8 @@
 /include/
 /templates/
 /configure/*.local
+/modules/RELEASE.*.local
+/modules/Makefile.local
 O.*/
 /QtC-*
 *.orig

.gitmodules

@@ -0,0 +1,24 @@
+[submodule "modules/pvData"]
+    path = modules/pvData
+    url = https://github.com/epics-base/pvDataCPP
+    branch = master
+[submodule "modules/pvAccess"]
+    path = modules/pvAccess
+    url = https://github.com/epics-base/pvAccessCPP
+    branch = master
+[submodule "modules/normativeTypes"]
+    path = modules/normativeTypes
+    url = https://github.com/epics-base/normativeTypesCPP
+    branch = master
+[submodule "modules/pvaClient"]
+    path = modules/pvaClient
+    url = https://github.com/epics-base/pvaClientCPP
+    branch = master
+[submodule "modules/pvDatabase"]
+    path = modules/pvDatabase
+    url = https://github.com/epics-base/pvDatabaseCPP
+    branch = master
+[submodule "modules/pva2pva"]
+    path = modules/pva2pva
+    url = https://github.com/epics-base/pva2pva
+    branch = master

.tools/make-tar.sh

@@ -0,0 +1,109 @@
+#!/bin/sh
+#
+# Make tar for git repo w/ one level of sub modules.
+#
+set -e
+
+die() {
+  echo "$1" >&2
+  exit 1
+}
+
+TOPREV="$1"
+FINALTAR="$2"
+PREFIX="$3"
+
+if ! [ "$TOPREV" ]
+then
+   cat <<EOF >&2
+usage: $0 [rev] [outfile.tar.gz] [prefix/]
+
+  <rev> may be any git revision spec. (tag, branch, or commit id).
+
+  Output file may be .tar.gz, .tar.bz2, or any extension supported by "tar -a".
+  If output file name is omitted, "base-<rev>.tar.gz" will be used.
+  If <prefix> is omitted, the default prefix is "base-<rev>/".
+EOF
+   exit 1
+fi
+
+[ "$FINALTAR" ] || FINALTAR="base-$TOPREV.tar.gz"
+[ "$PREFIX" ] || PREFIX="base-$TOPREV/"
+
+case "$PREFIX" in
+*/) ;;
+*)  die "Prefix must end with '/'";;
+esac
+
+# Check for both <tag> and R<tag>
+if ! [ `git tag -l $TOPREV` ]
+then
+  if [ `git tag -l R$TOPREV` ]
+  then
+    TOPREV="R$TOPREV"
+  else
+    die "No tags exist '$TOPREV' or 'R$TOPREV'"
+  fi
+fi
+
+# temporary directory w/ automatic cleanup
+TDIR=`mktemp -d`
+trap 'rm -rf "$TDIR"' EXIT INT QUIT TERM
+
+mkdir "$TDIR"/tar
+
+echo "Exporting revision $TOPREV as $FINALTAR with prefix $PREFIX"
+
+# Use git-archive to copy files at the given revision into our temp. dir.
+# Respects 'export-exclude' in .gitattributes files.
+
+git archive --prefix=$PREFIX $TOPREV | tar -C "$TDIR"/tar -x
+
+# use ls-tree instead of submodule-foreach to capture submodule revision associated with supermodule rev.
+#
+# sub-modules appear in tree as eg.:
+#  160000 commit c3a6cfcf0dad4a4eeecf59b474710d06ff3eb68a  modules/ca
+git ls-tree -r $TOPREV | awk '/^[0-9]+ commit / {print $3, $4}' | \
+while read HASH MODDIR
+do
+    echo "Visiting $HASH $MODDIR"
+    git -C $MODDIR archive --prefix=${PREFIX}${MODDIR}/ $HASH | tar -C "$TDIR"/tar -x
+done
+
+# make a list of files copied and filter out undesirables
+
+(cd "$TDIR"/tar && find . -mindepth 1 -not -type d) > "$TDIR"/list.1
+
+# Remove leading ./ from filenames
+sed -i -e 's|^\./||' "$TDIR"/list.1
+
+# Exclude files
+sed \
+  -e '/\/\.\?ci\//d' \
+  -e '/\/\.tools\//d' \
+  -e '/\/jenkins\//d' \
+  -e '/\/\.git/d' \
+  -e '/\/\.project$/d' \
+  -e '/\/\.travis\.yml$/d' \
+  -e '/\/\.appveyor\.yml$/d' \
+  "$TDIR"/list.1 > "$TDIR"/list.2
+
+if ! diff -U 0 "$TDIR"/list.1 "$TDIR"/list.2
+then
+    echo "Excluding the files shown above"
+fi
+
+# Use the filtered list to build the final tar
+#  The -a option chooses compression automatically based on output file name.
+
+tar -C "$TDIR"/tar --files-from="$TDIR"/list.2 -caf "$FINALTAR"
+
+echo "Wrote $FINALTAR"
+
+tar -taf "$FINALTAR" > "$TDIR"/list.3
+
+# make sure we haven't picked up anything extra
+if ! diff -u "$TDIR"/list.2 "$TDIR"/list.3
+then
+    echo "Oops! Tarfile diff against plan shown above"
+fi

.travis.yml

@@ -3,16 +3,6 @@ dist: trusty
 language: c
 compiler:
   - gcc
-env:
-  - CMPLR=gcc
-  - CMPLR=gcc EXTRA=CMD_CXXFLAGS=-std=c++11
-  - CMPLR=gcc STATIC=YES
-  - CMPLR=clang
-  - CMPLR=clang STATIC=YES
-  - WINE=32 TEST=NO STATIC=YES
-  - WINE=32 TEST=NO STATIC=NO
-  - RTEMS=4.10 TEST=NO
-  - RTEMS=4.9 TEST=NO
 addons:
   apt:
     packages:
@@ -21,12 +11,17 @@ addons:
     - perl
     - clang
     - g++-mingw-w64-i686
-    - bison
-    - flex
-    - texinfo
-    - install-info
-cache:
-  directories:
-   - $HOME/.cache
-install: sh ci/travis-prepare.sh </dev/null
-script: sh ci/travis-build.sh </dev/null
+    - qemu-system-x86
+script:
+  - .ci/travis-build.sh
+env:
+  - CMPLR=gcc
+  - CMPLR=clang
+  - CMPLR=gcc   STATIC=YES
+  - CMPLR=clang STATIC=YES
+  - CMPLR=gcc   EXTRA=CMD_CXXFLAGS=-std=c++11
+  - CMPLR=clang EXTRA=CMD_CXXFLAGS=-std=c++11
+  - WINE=32 TEST=NO STATIC=YES
+  - WINE=32 TEST=NO STATIC=NO
+  - RTEMS=4.10 TEST=YES
+  - RTEMS=4.9  TEST=YES

Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 
 TOP = .
@@ -14,8 +14,12 @@ include $(TOP)/configure/CONFIG
 TOOLS = $(TOP)/src/tools
 
 DIRS += configure src
-
 src_DEPEND_DIRS = configure
 
-include $(TOP)/configure/RULES_TOP
+DIRS += test
+test_DEPEND_DIRS = src
 
+DIRS += modules
+modules_DEPEND_DIRS = src
+
+include $(TOP)/configure/RULES_TOP

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright (c) 1991-2003 The University of Chicago, as Operator
-of Argonne National Laboratory.
+Copyright UChicago Argonne LLC, as Operator of Argonne
+National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base Versions 3.13.7 and higher are distributed
-subject to a Software License Agreement found in the
-file LICENSE that is included with this distribution.
+EPICS Base is distributed subject to a Software License
+Agreement found in the file LICENSE that is included with
+this distribution.
 
 ---------------------------------------------------------
 
@@ -22,3 +22,6 @@ training materials, additional components, links to other
 websites etc. is available on the EPICS home page at
 	https://epics.anl.gov/
 
+$Format:%cD$
+$Format:%H$
+https://code.launchpad.net/epics-base

ci/appveyor-prepare.bat

@@ -1,38 +0,0 @@
-:: Build script for AppVeyor (https://ci.appveyor.com/)
-:: Environment:
-::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/mingw]
-::     CONFIGURATION  -  determines EPICS build  [dynamic/static, -debug]
-::     PLATFORM       -  "x86" -> use 32bit architecture
-::
-:: Prepares an Appveyor build by excuting the following steps
-::     - Set up configure\CONFIG_SITE for static vs. dynamic build
-::     - Install Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
-::     - Download and install Make-4.1 from EPICS download page
-
-Setlocal EnableDelayedExpansion
-
-set OS=64BIT
-if "%PLATFORM%"=="x86" set OS=32BIT
-
-echo [INFO] Platform: %OS%
-
-if "%TOOLCHAIN%"=="mingw" (
-    echo.%CONFIGURATION% | findstr /C:"static">nul && (
-        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
-        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for static build
-    ) || (
-        echo [INFO] EPICS set up for dynamic build
-    )
-    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
-        echo HOST_OPT=NO>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for debug build
-    ) || (
-        echo [INFO] EPICS set up for optimized build
-    )
-)
-
-echo [INFO] Installing Make 4.2.1 from ANL web site
-curl -fsS --retry 3 -o C:\tools\make-4.2.1.zip https://epics.anl.gov/download/tools/make-4.2.1-win64.zip
-cd \tools
-"C:\Program Files\7-Zip\7z" e make-4.2.1.zip

ci/travis-prepare.sh

@@ -1,40 +0,0 @@
-#!/bin/sh
-set -e -x
-
-die() {
-  echo "$1" >&2
-  exit 1
-}
-
-CURDIR="$PWD"
-
-QDIR="$HOME/.cache/qemu"
-
-if [ -n "$RTEMS" -a "$TEST" = "YES" ]
-then
-  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
-  cd "$HOME/.build/qemu"
-
-  HEAD=`git log -n1 --pretty=format:%H`
-  echo "HEAD revision $HEAD"
-
-  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
-  echo "Cached revision $BUILT"
-
-  if [ "$HEAD" != "$BUILT" ]
-  then
-    echo "Building QEMU"
-    git submodule --quiet update --init
-
-    install -d "$HOME/.build/qemu/build"
-    cd         "$HOME/.build/qemu/build"
-
-    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
-    make -j2
-    make install
-
-    echo "$HEAD" > "$HOME/.cache/qemu/built"
-  fi
-fi
-
-cd "$CURDIR"

configure/CONFIG.gnuCommon

@@ -24,9 +24,14 @@ LD = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
 CPP = $(CC) -x c -E
 RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
 
+# Requires at least GCC 4.8 or LLVM (clang) 3.1
+ASAN_FLAGS_YES = -fsanitize=address
+ASAN_LDFLAGS_YES = $(ASAN_FLAGS_YES)
+
 PROF_CFLAGS_YES = -p
 GPROF_CFLAGS_YES = -pg
 CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
+CODE_CFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CFLAGS_YES = -Wall
 WARN_CFLAGS_NO = -w
 OPT_CFLAGS_YES = -O3
@@ -35,12 +40,14 @@ OPT_CFLAGS_NO = -g
 PROF_CXXFLAGS_YES = -p
 GPROF_CXXFLAGS_YES = -pg
 CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
+CODE_CXXFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
 OPT_CXXFLAGS_YES = -O3
 OPT_CXXFLAGS_NO = -g
 
 CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
+CODE_LDFLAGS += $(ASAN_LDFLAGS_$(ENABLE_ASAN))
 
 PIPE_CFLAGS_YES_YES = -pipe
 PIPE_CFLAGS = $(PIPE_CFLAGS_$(GCC_PIPE)_$(GNU))

configure/CONFIG_ADDONS

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 #
 #	check for add-on CFLAGS and CXXFLAGS
@@ -37,9 +37,6 @@
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY
 #    SHRLIB_LIBS   libs needed by shared LIBRARY
-#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
-#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
-#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
 #    USR_SYS_LIBS  system libs needed building libraries and prods
 #    PROD_SYS_LIBS system libs needed for building prods
 #    LIB_SYS_LIBS  system libs needed for building libraries
@@ -273,30 +270,6 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
-ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
-PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
-else
-ifdef PROD_OBJLIBS_DEFAULT
-PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
-LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
-else
-ifdef LIB_OBJLIBS_DEFAULT
-LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
-USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
-else
-ifdef USR_OBJLIBS_DEFAULT
-USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
-endif
-endif
-
 ifneq ($(strip $(LIB_OBJS_$(OS_CLASS))),)
 LIB_OBJS+=$(subst -nil-,,$(LIB_OBJS_$(OS_CLASS)))
 else
@@ -581,4 +554,3 @@ ifdef LIB_RCS_DEFAULT
 LIB_RCS+=$(LIB_RCS_DEFAULT)
 endif
 endif
-

configure/CONFIG_BASE

@@ -3,13 +3,12 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 
 #---------------------------------------------------------------
-# Epics base directories
+# EPICS Base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -18,17 +17,6 @@ ifdef T_A
   EPICS_BASE_BIN    = $(EPICS_BASE)/bin/$(T_A)
 endif
 
-#---------------------------------------------------------------
-# Epics base Ioc libraries 
-
-EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
-
-#---------------------------------------------------------------
-# Epics base Host libraries 
-
-EPICS_BASE_HOST_LIBS += cas gdd
-EPICS_BASE_HOST_LIBS += ca Com
-
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
 
@@ -39,17 +27,6 @@ ifdef BASE_TOP
   PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
 endif # BASE_TOP
 
-#---------------------------------------------------------------
-# Base c preprocessor flags
-
-BASE_CPPFLAGS = 
-
-# osithread default stack
-OSITHREAD_USE_DEFAULT_STACK = NO
-OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
-OSITHREAD_DEFAULT_STACK_FLAGS_NO =
-BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
-
 #---------------------------------------------------------------
 # Where to find the installed build tools
 #   Windows does not like commands with relative paths starting ../
@@ -59,61 +36,21 @@ TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
 FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# Epics base build tools and tool flags
+# EPICS Base build tools and tool flags
 
-MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
-DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
-DBTORECORDTYPEH            = $(PERL) $(TOOLS)/dbdToRecordtypeH.pl
-DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
-REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
-CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
-FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
-TAPTOJUNIT                 = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
-PROVE                      = $(PERL) $(TOOLS)/epicsProve.pl
+PODTOHTML        = $(PERL) $(TOOLS)/podToHtml.pl
+CONVERTRELEASE   = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME     = $(PERL) $(TOOLS)/fullPathName.pl
+TAPTOJUNIT       = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
+GENVERSIONHEADER = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG) $(QUESTION_FLAG)
 
-#-------------------------------------------------------
+#---------------------------------------------------------------
 # tools for installing libraries and products
-INSTALL_QUIETLY := $(if $(findstring s,$(MFLAGS)),-q,)
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
 #---------------------------------------------------------------
-# tools for making header dependancies and variable replacement
-MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
-REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
-
-#---------------------------------------------------------------
-# private versions of lex/yacc from EPICS
-EYACC = $(TOOLS)/antelope$(HOSTEXE)
-ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
-
-YACC  = $(EYACC)
-LEX   = $(ELEX)
-
-#---------------------------------------------------------------
-# Our use of msi is incompatible with older versions
-
-MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
-
-#---------------------------------------------------------------
-# External tools and tool flags - must be in path or defined in application
-
-ADL2DL ?= adl2dl
-
-# sch2edif compiler and flags
-SCH2EDIF = sch2edif
-SCH2EDIF_PATH =
-SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
-SCH2EDIF_FLAGS =
- 
-# e2db and flags
-#    - again there is an assumption where edb.def is installed.
-E2DB ?= e2db
-E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
-E2DB_FLAGS =
-
-DBST ?= dbst
-
-
-
+# tools for making header dependencies and variable replacement
+MKMF       = $(PERL) $(TOOLS)/mkmf.pl
+REPLACEVAR = $(PERL) $(TOOLS)/replaceVAR.pl

configure/CONFIG_BASE_VERSION

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 #
 #  EPICS Version information
@@ -15,19 +15,40 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
-# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
+# We define convenience macros for our release series to be NO or YES, so
+# Makefiles can detect 'Series X or later', or 'Series X only' like this:
+#
+#   ifdef BASE_3_14
+#       true for 3.14 or later
+#   ifdef BASE_3_15
+#       true for 3.15 or later
+#   ifdef BASE_3_16
+#       true for 3.16 or later
+#   ifdef BASE_7_0
+#       true for 7.0 or later
+#
+#   ifeq ($(BASE_3_14),YES)
+#       true for 3.14.x only
+#   ifeq ($(BASE_3_15),YES)
+#       true for 3.15.x only
+#   ifeq ($(BASE_3_16),YES)
+#       true for 3.16.x only.
+#   ifeq ($(BASE_7_0),YES)
+#       true for 7.0.x only.
+
 BASE_3_14 = NO
-BASE_3_15 = YES
+BASE_3_15 = NO
+BASE_3_16 = NO
+BASE_7_0  = YES
 
 # EPICS_VERSION must be a number >0 and <256
-EPICS_VERSION = 3
+EPICS_VERSION = 7
 
 # EPICS_REVISION must be a number >=0 and <256
-EPICS_REVISION = 15
+EPICS_REVISION = 0
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 7
+EPICS_MODIFICATION = 2
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
 # Not included if zero

configure/CONFIG_COMMON

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 #
 #  CONFIG_COMMON
@@ -38,10 +38,6 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
-#-------------------------------------------------------
-# dbst based database optimization default
-DB_OPT = NO
-
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
@@ -80,9 +76,14 @@ COMMON_DIR = ../O.Common
 IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 
 #-------------------------------------------------------
-# Make echo output - suppress echoing if make's '-s' flag is set
+# Silencing the build - suppress messages during 'make -s'
 NOP = :
 ECHO = @$(if $(findstring s,$(MFLAGS)),$(NOP),echo)
+QUIET_FLAG := $(if $(findstring s,$(MFLAGS)),-q,)
+
+#-------------------------------------------------------
+# Convert 'make -q' flag into '-i' for genVersionHeader.pl
+QUESTION_FLAG := $(if $(findstring q,$(MFLAGS)),-i,)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -92,7 +93,7 @@ INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 
-#Directories for libraries
+# Directories for libraries
 SHRLIB_SEARCH_DIRS          = $(INSTALL_LIB)
 
 #-------------------------------------------------------
@@ -166,13 +167,13 @@ TESTSHRLIBNAME = $(TESTSHRLIBNAME_$(SHARED_LIBRARIES))
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
+TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
 
 PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
+PROD_LD_OBJS = $(TARGET_OBJS) $(PRODUCT_OBJS)
 
 LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # Windows resource files
@@ -264,7 +265,7 @@ LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRA
 LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
 
 #--------------------------------------------------
-# prefix, suffix, and ldflags for loadable shared libraries 
+# prefix, suffix, and ldflags for loadable shared libraries
 TARGET_LIB_LDFLAGS=$($(patsubst $*,LOADABLE_,$(findstring $*,$(LOADABLE_LIBRARY)))SHRLIB_LDFLAGS)
 LOADABLE_SHRLIB_PREFIX=$(SHRLIB_PREFIX)
 LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
@@ -332,6 +333,14 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
+#--------------------------------------------------
+# genVersion header defaults
+
+# C macro name
+GENVERSIONMACRO = VCSVERSION
+# C macro default value (empty to use date+time)
+GENVERSIONDEFAULT =
+
 #--------------------------------------------------
 # Header dependency file generation
 
@@ -454,5 +463,5 @@ COMMON_INC += $(filter $(COMMON_DIR)/%, $(foreach file, $(INC), \
 SOURCE_INC = $(wildcard $(file) $(SOURCE_INC_bbb) )
 SOURCE_INC_bbb = $(foreach dir, $(ALL_SRC_DIRS), $(SOURCE_INC_aaa)  )
 SOURCE_INC_aaa = $(addsuffix /$(file), $(dir) )
- 
+
 endif

configure/CONFIG_ENV

@@ -35,8 +35,10 @@ EPICS_CA_CONN_TMO=30.0
 EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
+EPICS_CA_AUTO_ARRAY_BYTES=YES
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CA_MAX_SEARCH_PERIOD=300.0
+EPICS_CA_MCAST_TTL=1
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""
@@ -45,6 +47,9 @@ EPICS_CAS_SERVER_PORT=
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_IGNORE_ADDR_LIST=""
 
+# Servers to disable
+EPICS_IOC_IGNORE_SERVERS=""
+
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004

configure/CONFIG_SITE_ENV

@@ -24,41 +24,40 @@
 
 #  Site-specific environment settings
 
-## Time service:
-# EPICS_TZ
-#       Local timezone rules for vxWorks and RTEMS. The value follows the Posix
-#       TZ environment variable's Mm.n.d/h format (see the IBM link below for
-#       details). If TZ hasn't already been set when the osdTime timeRegister()
-#       C++ static constructor runs, this parameter will be copied into the TZ
-#       environment variable. Once the OS clock has been synchronized to NTP the
-#       routine tz2timezone() will be run to convert TZ into the TIMEZONE
-#       variable format that VxWorks needs.
-#               https://developer.ibm.com/articles/au-aix-posix/
-
-# Japan Standard Time, no DST:
-#EPICS_TZ = "JST-9"
-
-# Central European (Summer) Time:
-#EPICS_TZ = "CET-1CEST,M3.5.0/2,M10.5.0/3"
-
-# Greenwich Mean/British Summer Time:
-#EPICS_TZ = "GMT0BST,M3.5.0/1,M10.5.0/2"
-
-# US Eastern Standard/Daylight Time:
-#EPICS_TZ = "EST5EDT,M3.2.0/2,M11.1.0/2"
-
-# US Central Standard/Daylight Time:
-EPICS_TZ = "CST6CDT,M3.2.0/2,M11.1.0/2"
-
-# US Mountain Standard/Daylight Time:
-#EPICS_TZ = "MST7MDT,M3.2.0/2,M11.1.0/2"
-
-# US Pacific Standard/Daylight Time:
-#EPICS_TZ = "PST8PDT,M3.2.0/2,M11.1.0/2"
-
-# US Hawaiian Standard Time, no DST:
-#EPICS_TZ = "HST10"
-
+# Time service:
+# EPICS_TIMEZONE
+#	Local timezone info for vxWorks and RTEMS.  The format is
+#	    <name>::<minutesWest>:<startDST>:<endDST>
+#	where <name> is only used by strftime() for %Z conversions,
+#	and <startDST> and <endDST> are mmddhh - that is month,day,hour
+#	e.g. for ANL in 2018: EPICS_TIMEZONE=CUS::360:031102:110402
+#	The future dates below assume the rules don't get changed;
+#	see http://www.timeanddate.com/time/dst/2018.html to check.
+#
+#	DST for 2018  US: Mar 11 - Nov 04
+#	              EU: Mar 25 - Oct 28
+EPICS_TIMEZONE = CUS::360:031102:110402
+#EPICS_TIMEZONE = MET::-60:032502:102803
+#
+#	DST for 2019  US: Mar 10 - Nov 03
+#	              EU: Mar 31 - Oct 27
+#EPICS_TIMEZONE = CUS::360:031002:110302
+#EPICS_TIMEZONE = MET::-60:033102:102703
+#
+#	DST for 2020  US: Mar 08 - Nov 01
+#	              EU: Mar 29 - Oct 25
+#EPICS_TIMEZONE = CUS::360:030802:110102
+#EPICS_TIMEZONE = MET::-60:032902:102503
+#
+#	DST for 2021  US: Mar 14 - Nov 07
+#	              EU: Mar 28 - Oct 31
+#EPICS_TIMEZONE = CUS::360:031402:110702
+#EPICS_TIMEZONE = MET::-60:032802:103103
+#
+#	DST for 2022  US: Mar 13 - Nov 06
+#	              EU: Mar 27 - Oct 30
+#EPICS_TIMEZONE = CUS::360:031302:110602
+#EPICS_TIMEZONE = MET::-60:032702:103003
 
 # EPICS_TS_NTP_INET
 #	NTP time server ip address for VxWorks and RTEMS.
@@ -70,8 +69,11 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
+# IOCSH_HISTEDIT_DISABLE
+# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
+IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/RULES

@@ -1,11 +1,10 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
 ifndef T_A

configure/RULES.Db

@@ -4,14 +4,17 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#RULES.Db
 
-# Set db substitutions file suffix
+# RULES.Db
+
+# Set db substitutions and template file suffixes
 SUBST_SUFFIX ?= .substitutions
+TEMPL_SUFFIX ?= .template
 
-#####################################################  vpath
+#---------------------------------------------------------------
+# vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -19,12 +22,13 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-##################################################### dbflags dbdflags
+#---------------------------------------------------------------
+# dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -33,13 +37,15 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-##################################################### Targets
+#---------------------------------------------------------------
+# Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
+    $(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -86,31 +92,28 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
-          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
-          $*))))))))))
-TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
-          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
-          $(TEMPLATE1)))))))))))
-TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
-
-# dbst based database optimization
-ifeq '$(DB_OPT)' 'YES'
-RAW=.raw
-DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
-COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
-endif
+TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
+            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
+            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
+TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
+            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
+            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
+TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
+            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
+            ../template))
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#####################################################  acf files
+#---------------------------------------------------------------
+# acf files
+
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -123,7 +126,8 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#####################################################  dependancies
+#---------------------------------------------------------------
+# dependencies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -133,12 +137,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-##################################################### 
+#---------------------------------------------------------------
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
+TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -153,18 +157,13 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles clean-tests test-results junitfiles
 
-actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
+actionArchTargets = $(foreach action, $(ACTIONS), \
+    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
+cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 
-cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 -include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
-ifeq ($(EPICS_HOST_ARCH),$T_A)
-host: install
-else
-# Do nothing
-host:
-endif
 
 install: buildInstall
 
@@ -172,20 +171,30 @@ buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all host $(ACTIONS)
+.PHONY: all $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-endif # T_A defined
+else
+  # T_A is defined
+  ifeq ($(EPICS_HOST_ARCH),$(T_A))
+    host: install
+  else
+    host:
+  endif
+
+  .PHONY: host
+endif # T_A
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#####################################################  build dependancies, clean rule
+#---------------------------------------------------------------
+# build dependancies, clean rule
 
 inc : $(COMMON_INC) $(INSTALL_INC)
 
@@ -205,7 +214,8 @@ db_clean :
 
 realclean: clean
 
-##################################################### Dependency files
+#---------------------------------------------------------------
+# Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -256,19 +266,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
+%.db$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(RAW)$(DEP): %.template
+%.db$(DEP): %$(TEMPL_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(RAW)$(DEP): ../%.template
+%.db$(DEP): ../%$(TEMPL_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -282,14 +292,8 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-##################################################### CapFast filter
-
-$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
-	@$(RM) $@
-	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
-	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
-
-##################################################### Substitution files
+#---------------------------------------------------------------
+# Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -310,25 +314,21 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-##################################################### Template files
+#---------------------------------------------------------------
+# Template files
 
-$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
-	@$(RM) $@
-	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
-	@$(REPLACEVAR) < $@.VAR > $@
-	@$(RM) $@.VAR
-
-$(INSTALL_DB)/%.template: %.template
+$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%.template: ../%.template
+$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%.template
+.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
 
-##################################################### INC files
+#---------------------------------------------------------------
+# INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -362,7 +362,8 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-##################################################### DBD files
+#---------------------------------------------------------------
+# DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -425,56 +426,64 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-##################################################### HTML files
+#---------------------------------------------------------------
+# HTML files
 
-$(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
+$(COMMON_DIR)/%.html: %.dbd.pod
 	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/dbdToHtml.pl $(DBDFLAGS) -o $(notdir $@) $<
+	$(DBDTOHTML) $(DBDFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pod $(TOOLS)/podToHtml.pl
+$(COMMON_DIR)/%.html: %.pod
 	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
+	$(PODTOHTML) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
+$(COMMON_DIR)/%.html: %.pm
 	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
+	$(PODTOHTML) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
+$(COMMON_DIR)/%.html: ../%.pm
 	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
+	$(PODTOHTML) -s -o $(notdir $@) $<
+	@$(MKDIR) $(dir $@)
+	@$(MV) $(notdir $@) $@
+
+$(COMMON_DIR)/%.html: ../%.pl
+	@$(RM) $(notdir $@)
+	$(PODTOHTML) -s -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.html %.html
 
-##################################################### DB files
+#---------------------------------------------------------------
+# DB files
 
-$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db$(RAW): %.template
+$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db$(RAW): ../%.template
+$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -492,22 +501,6 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
-# dbst based database optimization
-ifeq '$(DB_OPT)' 'YES'
-
-$(COMMON_DIR)/%.db$(RAW): ../%.db
-	@$(RM) $@
-	$(CP) $< $@
-
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
-	$(ECHO) "Optimizing database $@"
-	@$(RM) $@
-	$(DBST) . $< -d > $@
-
-.PRECIOUS: $(COMMON_DIR)/%.db
-.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
-else
-
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -515,7 +508,6 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
@@ -531,8 +523,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-##################################################### register record,device,driver support
-
+#---------------------------------------------------------------
+# register record,device,driver support
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -548,4 +540,3 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 
-##################################################### END OF FILE

configure/RULES.ioc

@@ -4,9 +4,10 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#RULES.ioc
+
+# RULES.ioc
 
 include $(CONFIG)/RULES_DIRS
 

configure/RULES_ARCHS

@@ -90,6 +90,4 @@ realclean:
 .PHONY : $(BUILD_ARCHS) rebuild archsCommonClean
 .PHONY : $(ACTIONS) clean realclean archclean host all
 
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER
+include $(CONFIG)/RULES_COMMON

configure/RULES_BUILD

@@ -6,11 +6,12 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
+
+# RULES_BUILD
+
+# Rules for making things specified in a Makefile
 #
-#	Rules for making things specified in Makefile
-#
-#	we are in O.$(T_A), but most sources are elsewhere
-#
+# CWD is O.$(T_A), but most sources are elsewhere
 
 ifndef BASE_RULES_BUILD
 BASE_RULES_BUILD=1
@@ -42,6 +43,7 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_HOST)
 OBJS += $(OBJS_HOST)
 PROD += $(PROD_HOST)
 SCRIPTS += $(SCRIPTS_HOST)
+TARGETS += $(TARGETS_HOST)
 TESTLIBRARY += $(TESTLIBRARY_HOST)
 TESTSCRIPTS += $(TESTSCRIPTS_HOST)
 TESTPROD += $(TESTPROD_HOST)
@@ -53,6 +55,7 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_IOC)
 OBJS += $(OBJS_IOC)
 PROD += $(PROD_IOC)
 SCRIPTS += $(SCRIPTS_IOC)
+TARGETS += $(TARGETS_IOC)
 TESTLIBRARY += $(TESTLIBRARY_IOC)
 TESTSCRIPTS += $(TESTSCRIPTS_IOC)
 TESTPROD += $(TESTPROD_IOC)
@@ -79,9 +82,9 @@ else
 host:
 endif
 
--include $(CONFIG)/RULES_FILE_TYPE
+include $(CONFIG)/RULES_FILE_TYPE
 
--include $(CONFIG)/RULES.Db
+include $(CONFIG)/RULES.Db
 
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
@@ -185,7 +188,7 @@ endif
 
 # RELEASE file consistency checking
 checkRelease:
-	$(CONVERTRELEASE) checkRelease
+	+$(CONVERTRELEASE) checkRelease
 warnRelease:
 	-$(CONVERTRELEASE) checkRelease
 noCheckRelease:
@@ -332,6 +335,12 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 	@$(RM) $@
 	$(LINK.mod)
 
+#---------------------------------------------------------------
+# Generate Perl include path module
+%ModuleDirs.pm: $(wildcard $(TOP)/configure/RELEASE*)
+	@$(MKDIR) $(dir $@)
+	$(CONVERTRELEASE) -T $(TOP) $@
+
 #---------------------------------------------------------------
 # Automated testing
 
@@ -351,7 +360,7 @@ testspec: $(TESTSCRIPTS)
 test-results: tapfiles
 ifneq ($(TAPFILES),)
 ifdef RUNTESTS_ENABLED
-	$(PROVE) --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
+	prove --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
 endif
 
 CURRENT_TAPFILES := $(wildcard $(TAPFILES))
@@ -381,13 +390,21 @@ endif
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	$(CP) $< $@
+	$(EXPAND_TOOL) -t $(INSTALL_LOCATION) -a $(T_A) $< $@
 
 # Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
 %.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
+	$(PERL) $(TOOLS)/makeTestfile.pl $(T_A) $(EPICS_HOST_ARCH) $@ $<
+
+#---------------------------------------------------------------
+# Generate header with version number from VCS
+
+ifneq ($(GENVERSION),)
+$(COMMON_DIR)/$(GENVERSION): FORCE
+	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
+endif
 
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
@@ -464,6 +481,7 @@ ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
 endif # LOADABLE_SHRLIB_VERSION
 endif # LOADABLE_SHRLIB_SUFFIX
 
+ifneq ($(INSTALL_CONFIGS),)
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -471,6 +489,7 @@ $(INSTALL_CONFIG)/%: %
 $(INSTALL_CONFIG)/%: ../%
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_INCLUDE)/% : $(COMMON_DIR)/%
 	$(ECHO) "Installing generated generic include file $@"
@@ -516,14 +535,18 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
--include $(CONFIG)/RULES_EXPAND
+include $(CONFIG)/RULES_EXPAND
 
 .PRECIOUS: %.i %.o %.c %.nm %.cpp %.cc
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
 .PHONY: runtests tapfiles clean-tests test-results junitfiles
-.PHONY: checkRelease warnRelease noCheckRelease
+.PHONY: checkRelease warnRelease noCheckRelease FORCE
 
+include $(CONFIG)/RULES_COMMON
+
+else
+    $(warning RULES_BUILD included more than once. \
+        Use 'make show-makefiles' to work out why.)
 endif # BASE_RULES_BUILD
-#	EOF RULES_BUILD

configure/RULES_COMMON

@@ -0,0 +1,35 @@
+#*************************************************************************
+# Copyright (c) 2018 UChicago Argonne LLC, as Operator of Argonne
+#     National Laboratory.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
+#*************************************************************************
+
+# These rules show the set of Makefiles, config files and
+# rules files loaded by GNUmake.
+
+# Protect against filenames containing colons (Windows)
+SAFE_MAKEFILES = $(subst :,__colon__,$(MAKEFILE_LIST))
+SHOW_MAKEFILES = $(SAFE_MAKEFILES:%=show-makefile.%)
+show-makefiles: $(SHOW_MAKEFILES)
+
+# The sort prevents warnings about duplicate targets:
+$(sort $(SHOW_MAKEFILES)): show-makefile.%:
+	@echo "    $(subst __colon__,:,$(@:show-makefile.%=%))"
+
+.PHONY: show-makefiles show-makefile.%
+
+# These rules support printing a Makefile variable values.
+# Many variables are only set inside an O.<arch> build directory.
+#   make PRINT.T_A
+
+PRINT_Var = $(@:PRINT.%=%)
+PRINT.%:
+	@echo $(PRINT_Var) = '$($(PRINT_Var))'
+
+.PHONY: PRINT PRINT.%
+
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_DIRS

@@ -92,7 +92,4 @@ $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
 .PHONY : $(dirActionArchTargets)
 .PHONY : $(actionArchTargets)
 
-
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER
+include $(CONFIG)/RULES_COMMON

configure/RULES_EXPAND

@@ -1,4 +1,13 @@
-# <top>/configure/RULES_EXPAND
+#*************************************************************************
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
+#*************************************************************************
+
+# RULES_EXPAND
 
 vpath %@ $(USR_VPATH) $(ALL_SRC_DIRS)
 

configure/RULES_FILE_TYPE

@@ -7,9 +7,11 @@
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
-# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
+# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files,
+# excluding EPICS_BASE
 #
-RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), \
+RELEASE_RULES_BUILDS = $(foreach top, \
+    $(filter-out EPICS_BASE, $(RELEASE_TOPS)), \
     $(wildcard $($(top))/configure/RULES_BUILD))
 ifneq ($(RELEASE_RULES_BUILDS),)
   include $(RELEASE_RULES_BUILDS)
@@ -23,7 +25,7 @@ ifneq ($(RELEASE_CFG_RULES),)
   include $(RELEASE_CFG_RULES)
 endif
 
-# If this is not BASE then include <TOP>/configure/RULES_BUILD
+# If this is not BASE then include <top>/configure/RULES_BUILD
 #
 ifeq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
 TOP_RULES_BUILDS = $(wildcard $(TOP)/configure/RULES_BUILD)
@@ -67,7 +69,3 @@ file_type_clean:
 	@$(RM) $(foreach type, $(FILE_TYPE), $($(type)))
 
 .PHONY : file_type_clean
-
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER

configure/RULES_OCTAVE

@@ -1,11 +1,10 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
 # Octave definitions and rules

configure/RULES_TARGET

@@ -1,18 +1,13 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-#  RULES_TARGET
-#
-#  This file is to be maintained by the community.
-#
-#-----------------------------------------------------------------------
+
+# RULES_TARGET
 
 define TARGET_template
 $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
@@ -20,7 +15,7 @@ $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
              $$($(1)_$(2)_DEFAULT))
 endef
 
-$(foreach type, SRCS RCS OBJS LDFLAGS OBJLIBS LDOBJS SYS_LIBS , \
+$(foreach type, SRCS RCS OBJS LDFLAGS LDOBJS SYS_LIBS , \
 $(foreach target, $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) , \
     $(eval $(call TARGET_template,$(strip $(target)),$(type)))))
 
@@ -152,4 +147,3 @@ $(foreach target, $(LOADABLE_LIBRARY), \
     $(eval $(call LOADABLE_LIBRARY_template,$(strip $(target)))))
 
 #-----------------------------------------------------------------------
-

configure/RULES_TOP

@@ -15,12 +15,19 @@ CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
 cvsclean:
 	$(PERL) $(CVSCLEAN)
 
+DEPCLEAN = $(call FIND_TOOL,depclean.pl)
+depclean:
+	$(PERL) $(DEPCLEAN)
+
 realuninstall: uninstallDirs
 	$(RMDIR) $(INSTALL_LOCATION_BIN)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 
 UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
     $(INSTALL_HTML) $(INSTALL_TEMPLATES) $(INSTALL_DB) $(DIRECTORY_TARGETS)
+ifneq ($(INSTALL_LOCATION),$(TOP))
+UNINSTALL_DIRS += $(INSTALL_CONFIG)
+endif
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 
@@ -70,12 +77,14 @@ help:
 	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
 	@echo "     distclean      - Same as realclean cvsclean realuninstall."
+	@echo "     depclean       - Removes all .d files from O.<arch> directories."
 	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
 	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
+.PHONY: cleandirs distclean cvsclean depclean
+.PHONY: realuninstall archuninstall uninstallDirs
 .PHONY: uninstall help
 
 # Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files

configure/os/CONFIG.Common.RTEMS

@@ -27,9 +27,13 @@ ifneq ($(CONFIG),$(TOP)/configure)
 -include $(TOP)/configure/CONFIG_SITE.Common.RTEMS
 endif
 
+#--------------------------------------------------
+# Set RTEMS_BSP from T_A if not already done
+RTEMS_BSP ?= $(subst RTEMS-,,$(T_A))
+
 #-------------------------------------------------------
 # Pick up the RTEMS tool/path definitions from the RTEMS BSP directory.
-include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(subst RTEMS-,,$(T_A))/Makefile.inc
+include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(RTEMS_BSP)/Makefile.inc
 include $(RTEMS_CUSTOM)
 include $(CONFIG.CC)
 

configure/os/CONFIG.Common.RTEMS-at91rm9200ek

@@ -9,5 +9,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=arm
+RTEMS_BSP = at91rm9200ek
+RTEMS_TARGET_CPU = arm
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -5,6 +5,7 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
+RTEMS_BSP = beatnik
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-gen68360

@@ -5,5 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=m68k
+RTEMS_BSP = gen68360
+RTEMS_TARGET_CPU = m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mcp750

@@ -5,5 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=ppc
+RTEMS_BSP = mcp750
+RTEMS_TARGET_CPU = ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme167

@@ -5,5 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=m68k
+RTEMS_BSP = mvme167
+RTEMS_TARGET_CPU = m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -5,6 +5,7 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
+RTEMS_BSP = mvme2100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme2700

@@ -1,6 +1,7 @@
 #
 # Author: Matt Rippa
 #
+RTEMS_BSP = mvme2700
 RTEMS_TARGET_CPU = powerpc
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -5,6 +5,7 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
+RTEMS_BSP = mvme3100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -5,6 +5,7 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
+RTEMS_BSP = mvme5500
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-pc386

@@ -5,14 +5,15 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=i386
+RTEMS_BSP = pc386
+RTEMS_TARGET_CPU = i386
 
 MUNCH_SUFFIX = .boot
 define MUNCH_CMD
-	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
+	$(RM) $*.bin
+	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< $*.bin
 	$(BIN2BOOT) $@ 0x00097E00 \
-		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
-	rm -f temp.bin
+	    $(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 $*.bin 0x00100000 0
 endef
 
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386-qemu

@@ -0,0 +1,11 @@
+# CONFIG.Common.RTEMS-pc386-qemu
+#
+# Definitions for the RTEMS-pc386-qemu target
+# Site-specific overrides go in CONFIG_SITE.Common.RTEMS-pc386-qemu
+#
+#-------------------------------------------------------
+
+# Include definitions from RTEMS-pc386
+include $(CONFIG)/os/CONFIG.Common.RTEMS-pc386
+
+RTEMS_QEMU_FIXUPS = YES

configure/os/CONFIG.Common.RTEMS-psim

@@ -5,5 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_TARGET_CPU=ppc
+RTEMS_BSP = psim
+RTEMS_TARGET_CPU = ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -5,6 +5,7 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
+RTEMS_BSP = uC5282
 RTEMS_TARGET_CPU = m68k
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 

configure/os/CONFIG.Common.vxWorksCommon

@@ -1,7 +1,7 @@
 # CONFIG.Common.vxWorksCommon
 #
 # Definitions for vxWorks target archs
-# Sites may override these definitions in CONFIG_SITE.Common.vxWorksCommon
+# Override these definitions in CONFIG_SITE.Common.vxWorksCommon
 # or CONFIG_SITE.<host>.vxWorksCommon
 #-------------------------------------------------------
 
@@ -63,8 +63,6 @@ VXWORKS_MAJOR_VERSION = $(basename $(basename $(VXWORKS_VERSION)))
 
 # These are needed for vxWorks 6.x; the GNU toolset version number
 # is in the path to the compiler tools:
-VX_GNU_VERSION_5.4 = 2.95
-VX_GNU_VERSION_5.5 = 2.96
 VX_GNU_VERSION_6.0 = 3.3.2
 VX_GNU_VERSION_6.1 = 3.3.2
 VX_GNU_VERSION_6.2 = 3.3.2
@@ -80,30 +78,21 @@ VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
 
 #--------------------------------------------------
-# Fix WIND_BASE for vxWorks 6.x on linux
-# NB: We know the value of WIND_HOST_TYPE here, but not VXWORKS_VERSION
+# Fix old Linux WIND_HOST_TYPE
 ifeq ($(WIND_HOST_TYPE),x86-linux)
-  WIND_HOST_TYPE_5 = x86-linux
-  WIND_HOST_TYPE_6 = x86-linux2
-  WIND_HOST_TYPE = $(WIND_HOST_TYPE_$(VXWORKS_MAJOR_VERSION))
+  WIND_HOST_TYPE = x86-linux2
 endif
 
 #--------------------------------------------------
 # vxWorks directory definitions
-VX_DIR_5 = $(WIND_BASE)
-VX_DIR_6 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
-VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
+VX_DIR = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
 
-VX_INCLUDE_DIRS_5 = $(VX_DIR)/target/h
-VX_INCLUDE_DIRS_6 = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
-GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
+GNU_TARGET_INCLUDE_DIR = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
 
 #--------------------------------------------------
 # vxWorks GNU directories
 
-GNU_DIR_5 = $(WIND_BASE)/host/$(WIND_HOST_TYPE)
-GNU_DIR_6 = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
-GNU_DIR = $(GNU_DIR_$(VXWORKS_MAJOR_VERSION))
+GNU_DIR = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
 
 #--------------------------------------------------
 # This finds nm on any supported VxWorks version
@@ -113,9 +102,7 @@ NM = $(firstword $(wildcard $(WIND_BASE)/*/$(WIND_HOST_TYPE)/bin/$(NMPROG)))
 
 #--------------------------------------------------
 # A linker script is essential for munching from vxWorks 6.6 onwards
-# (i.e. with versions that use gcc 4.1.2 or later).  It can be used
-# with any vxWorks 5 or 6 version, but apparently should not be used
-# when compiling for 68K (which isn't supported in vxWorks 6 anyway)
+# (i.e. with versions that use gcc 4.1.2 or later).
 MUNCH_LDFLAGS_6 = -T $(VX_DIR)/target/h/tool/gnu/ldscripts/link.OUT
 MUNCH_LDFLAGS = $(MUNCH_LDFLAGS_$(VXWORKS_MAJOR_VERSION))
 
@@ -131,11 +118,10 @@ export TOOL_FAMILY = GNU
 OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
-# Fix for vxWorks 5 headers that use macros defined in vxWorks.h but
+# Fix for vxWorks headers that use macros defined in vxWorks.h but
 # which don't actually include vxWorks.h themselves, for example the
 # target/h/sys/stat.h file which uses ULONG.  This also stops dbDefs.h
-# from defining the OFFSET macro, which generates lots of warnings in
-# both vxWorks 5 and 6.
+# from defining the OFFSET macro, which generates lots of warnings.
 OP_SYS_INCLUDE_CPPFLAGS += -include $(VX_DIR)/target/h/vxWorks.h
 
 #--------------------------------------------------
@@ -148,7 +134,6 @@ OPT_CXXFLAGS_YES = -O2
 CODE_CFLAGS =
 #
 # For vxWorks versions before 6.3 we need this g++ compiler flag
-CODE_CXXFLAGS_5 = -fno-implicit-templates
 CODE_CXXFLAGS_6.0 = -fno-implicit-templates
 CODE_CXXFLAGS_6.1 = -fno-implicit-templates
 CODE_CXXFLAGS_6.2 = -fno-implicit-templates
@@ -161,8 +146,10 @@ SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS =
 
 #--------------------------------------------------
-# Earlier versions of gcc don't understand -MF
-HDEPENDS_COMPFLAGS = -MM > $@
+# Don't use gcc 2.x for dependency generation
+
+HDEPENDS_METHOD_2 = MKMF
+HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
 
 #--------------------------------------------------
 # osithead use default stack, YES or NO override
@@ -186,10 +173,8 @@ VXCPPFLAGS = $(filter-out $(OP_SYS_INCLUDE_CPPFLAGS),$(CPPFLAGS))
 PREPROCESS.cpp = $(CPP) $(VXCPPFLAGS) $(INCLUDES) $< > $@
 
 #--------------------------------------------------
-# Don't use gcc 2.x for dependency generation
-
-HDEPENDS_METHOD_2 = MKMF
-HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
+# Use LEDLIB for command-line editing
+COMMANDLINE_LIBRARY = LEDLIB
 
 #--------------------------------------------------
 # Allow site overrides

configure/os/CONFIG.UnixCommon.Common

@@ -8,7 +8,7 @@
 CP = cp
 MV = mv
 RM = rm -f
-MKDIR = mkdir
+MKDIR = mkdir -p
 RMDIR = rm -rf
 CAT = cat
 

configure/os/CONFIG.linux-386.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.linux-486.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.linux-586.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.linux-686.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.linux-x86.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.linux-x86_64.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux
+WIND_HOST_TYPE = x86-linux2

configure/os/CONFIG.win32-x86.Common

@@ -26,3 +26,5 @@ endif
 # Needed to find dlls for base installed build tools (antelope,eflex,...)
 PATH := $(EPICS_BASE_BIN):$(PATH)
 
+# Silence the tr1 namespace deprecation warnings
+USR_CXXFLAGS_WIN32 += -D_SILENCE_TR1_NAMESPACE_DEPRECATION_WARNING

configure/os/CONFIG_SITE.Common.RTEMS-pc386

@@ -1,3 +0,0 @@
-#
-# Site-specific overrides for RTEMS-pc386 target
-#

configure/os/CONFIG_SITE.Common.RTEMS-pc386-qemu

@@ -0,0 +1,9 @@
+# CONFIG_SITE.Common.RTEMS-pc386-qemu
+#
+# Site-specific overrides for the RTEMS-pc386-qemu target
+#
+
+# If you're building this architecture you _probably_ want to
+# run the tests for it under QEMU, but if not you can turn
+# them off here by commenting out this line:
+CROSS_COMPILER_RUNTEST_ARCHS += RTEMS-pc386-qemu

configure/os/CONFIG_SITE.Common.linux-arm

@@ -1,35 +1,39 @@
 # CONFIG_SITE.Common.linux-arm
 #
-# Site-specific settings for the linux-arm target
+# Site Specific definitions for all linux-arm targets
+#-------------------------------------------------------
 
-# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
 # a) LD_LIBRARY_PATH must include the full absolute pathname to
 #    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
 #    executables.
-# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which
+# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
 #    will add the named directory to the list contained in the executables.
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
+# Depending on your version of Linux you'll want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(firstword $(READLINE_DIR) $(GNU_DIR))/include/readline/readline.h), \
-  READLINE, EPICS))
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+#COMMANDLINE_LIBRARY = READLINE
 
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
-
-# Needs -lncurses:
+# Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
 
-# Needs -lcurses:
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-cris

@@ -1,8 +1,9 @@
 # CONFIG_SITE.Common.linux-cris
 #
-# Site-specific settings for the linux-cris target
+# Site Specific definitions for linux-cris target
+# Only the local epics system manager should modify this file
 
-# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -14,21 +15,21 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
+# Depending on your version of Linux you may want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+#COMMANDLINE_LIBRARY = READLINE
 
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
-
-# Needs -lncurses:
+# Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
 
-# Needs -lcurses:
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS
+
+OP_SYS_CFLAGS += -g
+

configure/os/CONFIG_SITE.Common.linux-microblaze

@@ -1,6 +1,7 @@
 # CONFIG_SITE.Common.linux-microblaze
 #
-# Site-specific settings for the linux-microblaze target
+# Site specific definitions for linux-microblaze target builds.
+#-------------------------------------------------------
 
 # The gnu tools for cross compiling for MicroBlaze (little endian)
 # on Linux can be downloaded from the Xilinx git server:
@@ -11,21 +12,3 @@
 
 GNU_DIR = /usr/local/vw/microblaze-2.0/microblazeel-unknown-linux-gnu
 
-
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
-
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
-
-# Needs -lncurses:
-#COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-# Needs -lcurses:
-#COMMANDLINE_LIBRARY = READLINE_CURSES
-
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.linux-x86

@@ -1,8 +1,9 @@
 # CONFIG_SITE.Common.linux-x86
 #
-# Site-specific settings for the linux-x86 target
+# Site Specific definitions for linux-x86 target
+# Only the local epics system manager should modify this file
 
-# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -14,15 +15,14 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
+# Depending on your version of Linux you'll want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
-
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+COMMANDLINE_LIBRARY = READLINE
 
 # Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
@@ -30,9 +30,6 @@ COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
 # Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS
-
 
 # Permit access to 64-bit file-systems
 OP_SYS_CFLAGS += -D_FILE_OFFSET_BITS=64
@@ -46,6 +43,18 @@ OP_SYS_CFLAGS += -D_FILE_OFFSET_BITS=64
 #CCC         = clang++
 
 
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g
+
+
 # Tune GNU compiler output for a specific 32-bit cpu-type
 # (e.g. generic, native, i386, i686, pentium2/3/4, prescott, k6, athlon etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
+
+
+# Developers using a suitable compiler may enable its address sanitizer:
+#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -1,8 +1,9 @@
 # CONFIG_SITE.Common.linux-x86_64
 #
-# Site-specific settings for the linux-x86_64 target
+# Site Specific definitions for linux-x86_64 target
+# Only the local epics system manager should modify this file
 
-# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -14,15 +15,14 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
+# Depending on your version of Linux you'll want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
-
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+COMMANDLINE_LIBRARY = READLINE
 
 # Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
@@ -30,9 +30,6 @@ COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
 # Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS
-
 
 # Uncomment the followings lines to build with CLANG instead of GCC.
 #
@@ -42,6 +39,18 @@ COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
 #CCC         = clang++
 
 
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g
+
+
 # Tune GNU compiler output for a specific 64-bit cpu-type
 # (e.g. generic, native, core2, nocona, k8, opteron, athlon64, barcelona etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
+
+
+# Developers using a suitable compiler may enable its address sanitizer:
+#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.linux-xscale_be

@@ -1,23 +1,4 @@
 # CONFIG_SITE.Common.linux-xscale_be
 #
-# Site-specific settings for the linux-xscale_be target
-
-
-# Use GNU Readline if the header file is installed
-COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
-    $(firstword $(READLINE_DIR) $(GNU_DIR))/include/readline/readline.h), \
-  READLINE, EPICS))
-
-# If libreadline needs additional libraries to be linked with it, try
-# uncommenting each of the lines below in turn, starting with the top
-# one and working downwards, until the build succeeds. Do a 'make rebuild'
-# from the top of the Base tree after changing this setting.
-
-# Needs -lncurses:
-#COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-# Needs -lcurses:
-#COMMANDLINE_LIBRARY = READLINE_CURSES
-
-# Readline is broken or you don't want use it:
-#COMMANDLINE_LIBRARY = EPICS
+# Site specific definitions for all linux-xscale_be target builds.
+#-------------------------------------------------------

configure/os/CONFIG_SITE.Common.linuxCommon

@@ -1,11 +0,0 @@
-# CONFIG_SITE.Common.linuxCommon
-#
-# Site-specific settings for all linux targets
-
-
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -1,21 +1,13 @@
 # CONFIG_SITE.Common.vxWorksCommon
 #
 # Site specific definitions for vxWorks target builds.
-# Only the local epics system manager should modify this file
 
 # Compiler options can vary with the vxWorks version number, so we
-# need to know that.  However don't include any third-level digits
-# (e.g. the .2 in 5.5.2) because we don't need them.
+# need to know that.  Do not include any third-level digits.
 
-# Note: vxWorks 5.4.x (Tornado 2.0.x) is not supported
+# Note: vxWorks 5.4.x and 5.5.x (Tornado 2.x) are not supported.
+# VxWorks 6.0 through 6.5 use older, untested versions of GCC.
 
-#VXWORKS_VERSION = 5.5
-#VXWORKS_VERSION = 6.0
-#VXWORKS_VERSION = 6.1
-#VXWORKS_VERSION = 6.2
-#VXWORKS_VERSION = 6.3
-#VXWORKS_VERSION = 6.4
-#VXWORKS_VERSION = 6.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
@@ -27,7 +19,6 @@ VXWORKS_VERSION = 6.9
 # CONFIG_SITE.$(EPICS_HOST_ARCH).vxWorksCommon file.
 
 # WIND_BASE is where you installed the Wind River software.
-# Under vxWorks 6.x this is *not* the same as the old VX_DIR setting
 
 #WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -8,7 +8,8 @@ GNU_TARGET = arm-xilinx-linux-gnueabi
 
 # Set GNU tools install path
 # Examples are installations at the APS:
-GNU_DIR = /usr/local/vw/zynq-2011.09
+#GNU_DIR = /usr/local/vw/zynq-2011.09
+GNU_DIR = /usr/local/vw/zynq-2016.1/gnu/arm/lin
 #GNU_DIR = /usr/local/Xilinx/SDK/2016.3/gnu/arm/lin
 #GNU_DIR = /APSshare/XilinxSDK/2015.4/gnu/arm/lin
 

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -14,10 +14,10 @@
 #GNU_DIR = /usr/local
 
 # Different distribution cross-build packages use different prefixes:
-# Ubuntu:
-#CMPLR_PREFIX = i686-w64-mingw32-
-# RHEL:
-CMPLR_PREFIX = i686-pc-mingw32-
+# Ubuntu, RHEL7:
+CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL6:
+#CMPLR_PREFIX = i686-pc-mingw32-
 # Debian?
 #CMPLR_PREFIX = i586-mingw32msvc-
 

documentation/KnownProblems.html

@@ -4,25 +4,33 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in R3.15.7</title>
+  <title>Known Problems in EPICS 7.0.2</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS Base R3.15.7: Known Problems</h1>
+<h1 style="text-align: center">EPICS 7.0.2: Known Problems</h1>
 
 <p>Any patch files linked below should be applied at the root of the
-base-3.15.7 tree. Download them, then use the GNU Patch program as
+base-7.0.2 tree. Download them, then use the GNU Patch program as
 follows:</p>
 
-<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.15.7</b>
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-7.0.2</b>
 % <b>patch -p1 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
 
-<p>The following significant problems have been reported with this
-version of EPICS Base:</p>
+<p>The following problems were known by the developers at the time of this
+release:</p>
 
 <ul>
 
-  <li>None known as yet.</li>
+<!-- Items added after release should be formatted thusly:
+  <li>YYYY-MM-DD: Description of problem.
+    <a href="fix.patch">This patch</a> fixes the problem.
+    ...</li>
+-->
+
+  <li>IOCs running on some versions of Cygwin may display warnings at iocInit
+    about duplicate EPICS CA Address list entries. These warnings might be due
+    to a bug in Cygwin; they are benign and can be ignored.</li>
 
 </ul>
 

documentation/README.1st

@@ -0,0 +1,344 @@
+                           Installation Instructions
+
+                            EPICS Base Release 7.0.2
+
+   --------------------------------------------------------------------------
+
+  Table of Contents
+
+     * What is EPICS base?
+     * What is new in this release?
+     * Copyright
+     * Supported platforms
+     * Supported compilers
+     * Software requirements
+     * Host system storage requirements
+     * Documentation
+     * Directory Structure
+     * Build related components
+     * Building EPICS base (Unix and Win32)
+     * Example application and extension
+     * Multiple host platforms
+
+   --------------------------------------------------------------------------
+
+  What is EPICS base?
+
+     The Experimental Physics and Industrial Control Systems (EPICS) is an
+     extensible set of software components and tools with which application
+     developers can create a control system. This control system can be used
+     to control accelerators, detectors, telescopes, or other scientific
+     experimental equipment. EPICS base is the set of core software, i.e. the
+     components of EPICS without which EPICS would not function. EPICS base
+     allows an arbitrary number of target systems, IOCs (input/output
+     controllers), and host systems, OPIs (operator interfaces) of various
+     types.
+
+  What is new in this release?
+
+     Please check the RELEASE_NOTES file in the distribution for description
+     of changes and release migration details.
+
+  Copyright
+
+     Please review the LICENSE file included in the distribution for legal
+     terms of usage.
+
+  Supported platforms
+
+     The list of platforms supported by this version of EPICS base is given
+     in the configure/CONFIG_SITE file. If you are trying to build EPICS Base
+     on an unlisted host or for a different target machine you must have the
+     proper host/target cross compiler and header files, and you will have to
+     create and add the appropriate new configure files to the
+     base/configure/os/directory. You can start by copying existing
+     configuration files in the configure/os directory and then make changes
+     for your new platforms.
+
+  Supported compilers
+
+     This version of EPICS base has been built and tested using the host
+     vendor's C and C++ compilers, as well as the GNU gcc and g++ compilers.
+     The GNU cross-compilers work for all cross-compiled targets. You may
+     need the C and C++ compilers to be in your search path to do EPICS
+     builds; check the definitions of CC and CCC in
+     base/configure/os/CONFIG.<host>.<host> if you have problems.
+
+  Software requirements
+
+     GNU make
+     You must use the GNU version of make for EPICS builds, and we now
+     recommend version 4.1 or later (version 3.82 may work on Linux, but
+     doesn't on Windows).
+
+     Perl
+     You must have Perl version 5.8.1 or later installed. The EPICS
+     configuration files do not specify the perl full pathname, so the perl
+     executable must be found through your normal search path.
+
+     Unzip and tar (Winzip on WIN32 systems)
+     You must have tools available to unzip and untar the EPICS base
+     distribution file.
+
+     Target systems
+     EPICS supports IOCs running on embedded platforms such as VxWorks and
+     RTEMS built using a cross-compiler, and also supports soft IOCs running
+     as processes on the host platform.
+
+     vxWorks
+     You must have vxWorks 6 installed if any of your target systems are
+     vxWorks systems; the C++ compilers for vxWorks 5.x are now too old to
+     support. The vxWorks installation provides the cross-compiler and header
+     files needed to build for these targets. The absolute path to and the
+     version number of the vxWorks installation must be set in the
+     base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
+     target-specific overrides.
+
+     Consult the vxWorks 6.x EPICS web pages and the vxWorks documentation
+     for information about configuring your vxWorks operating system for use
+     with EPICS.
+
+     RTEMS
+     For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
+     4.10. The newer 4.11 or 5.x releases are not supported yet.
+
+     Command-line editing libraries
+     GNU readline or other OS-specific libraries can be used by the IOC shell
+     to provide command line editing and history recall. The default setting
+     is different for each OS. On Linux the default is to use READLINE since
+     most distributions include it. On MacOS the default is also READLINE
+     since Apple provides a compatible library, although it isn't GNU. On
+     RTEMS we support GNU readline and Tecla, although the default is to use
+     neither since these have to be added to the RTEMS installation
+     separately. On vxWorks we support the built-in ledLib library.
+
+  Host system storage requirements
+
+     The compressed tar file is approximately 1.6 MB in size. The
+     distribution source tree takes up approximately 12 MB. Each host target
+     will need around 40 MB for build files, and each cross-compiled target
+     around 20 MB.
+
+  Documentation
+
+     EPICS documentation is available through the EPICS website at Argonne.
+
+     Release specific documentation can also be found in the
+     base/documentation directory of the distribution.
+
+  Directory Structure
+
+    Distribution directory structure:
+
+         base                    Root directory of the base distribution
+         base/configure          Operating system independent build config files
+         base/configure/os       Operating system dependent build config files
+         base/documentation      Distribution documentation
+         base/src                Source code in various subdirectories
+         base/startup            Scripts for setting up path and environment
+
+    Install directories created by the build:
+
+         bin                     Installed scripts and executables in subdirs
+         cfg                     Installed build configuration files
+         db                      Installed data bases
+         dbd                     Installed data base definitions
+         doc                     Installed documentation files
+         html                    Installed html documentation
+         include                 Installed header files
+         include/os              Installed os specific header files in subdirs
+         include/compiler        Installed compiler-specific header files
+         lib                     Installed libraries in arch subdirectories
+         lib/perl                Installed perl modules
+         templates               Installed templates
+
+  Build related components
+
+    base/documentation directory - contains setup, build, and install documents
+
+         README.1st           Instructions for setup and building epics base
+         README.html          html version of README.1st
+         README.darwin.html   Installation notes for Mac OS X (Darwin)
+         RELEASE_NOTES.html   Notes on release changes
+         KnownProblems.html   List of known problems and workarounds
+
+    base/startup directory - contains scripts to set environment and path
+
+         EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
+         unix.csh            C shell script to set path and env variables
+         unix.sh             Bourne shell script to set path and env variables
+         win32.bat           Bat file example to configure win32-x86 target
+         windows.bat         Bat file example to configure windows-x64 target
+
+    base/configure directory - contains build definitions and rules
+
+         CONFIG                Includes configure files and allows variable overrides
+         CONFIG.CrossCommon    Cross build definitions
+         CONFIG.gnuCommon      Gnu compiler build definitions for all archs
+         CONFIG_ADDONS         Definitions for <osclass> and DEFAULT options
+         CONFIG_APP_INCLUDE
+         CONFIG_BASE           EPICS base tool and location definitions
+         CONFIG_BASE_VERSION   Definitions for EPICS base version number
+         CONFIG_COMMON         Definitions common to all builds
+         CONFIG_ENV            Definitions of EPICS environment variables
+         CONFIG_FILE_TYPE
+         CONFIG_SITE           Site specific make definitions
+         CONFIG_SITE_ENV       Site defaults for EPICS environment variables
+         MAKEFILE              Installs CONFIG* RULES* creates
+         RELEASE               Location of external products
+         RULES                 Includes appropriate rules file
+         RULES.Db              Rules for database and database definition files
+         RULES.ioc             Rules for application iocBoot/ioc* directory
+         RULES_ARCHS           Definitions and rules for building architectures
+         RULES_BUILD           Build and install rules and definitions
+         RULES_DIRS            Definitions and rules for building subdirectories
+         RULES_EXPAND
+         RULES_FILE_TYPE
+         RULES_TARGET
+         RULES_TOP             Rules specific to a <top> dir (uninstall and tar)
+         Sample.Makefile       Sample makefile with comments
+
+    base/configure/os directory - contains os-arch specific definitions
+
+         CONFIG.<host>.<target>      Specific host-target build definitions
+         CONFIG.Common.<target>      Specific target definitions for all hosts
+         CONFIG.<host>.Common        Specific host definitions for all targets
+         CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
+         CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
+         CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
+         CONFIG_SITE.<host>.<target> Site specific host-target definitions
+         CONFIG_SITE.Common.<target> Site specific target defs for all hosts
+         CONFIG_SITE.<host>.Common   Site specific host defs for all targets
+
+  Building EPICS base (Unix and Win32)
+
+    Unpack file
+
+       Unzip and untar the distribution file. Use WinZip on Windows systems.
+
+    Set environment variables
+
+       Files in the base/startup directory have been provided to help set
+       required path and other environment variables.
+
+       EPICS_HOST_ARCH
+       Before you can build or use EPICS Base, the environment variable
+       EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in
+       the base/startup directory has been provided to help set
+       EPICS_HOST_ARCH. You should have EPICS_HOST_ARCH set to your host
+       operating system followed by a dash and then your CPU architecture,
+       e.g. linux-x86_64. If you are not using the OS vendor's c/c++ compiler
+       for host builds, you will need another dash followed by the alternate
+       compiler name (e.g. "-gnu" for GNU c/c++ compilers on a solaris host
+       or "-mingw" for MinGW c/c++ compilers on a WIN32 host). See
+       configure/CONFIG_SITE for a list of supported EPICS_HOST_ARCH values.
+
+       PERLLIB
+       On WIN32, some versions of Perl require that the environment variable
+       PERLLIB be set to <perl directory location>.
+
+       PATH
+       As already mentioned, you must have the perl executable and you may
+       need C and C++ compilers in your search path. For building base you
+       also must have echo in your search path. For Unix host builds you also
+       need ln, cpp, cp, rm, mv, and mkdir in your search path and /bin/chmod
+       must exist. On some Unix systems you may also need ar and ranlib in
+       your path, and the C compiler may require as and ld in your path. On
+       solaris systems you need uname in your path.
+
+       LD_LIBRARY_PATH
+       EPICS shared libraries and executables normally contain the full path
+       to any libraries they require. However, if you move the EPICS files or
+       directories from their build-time location then in order for the
+       shared libraries to be found at runtime LD_LIBRARY_PATH must include
+       the full pathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when
+       invoking executables, or some equivalent OS-specific mechanism (such
+       as /etc/ld.so.conf on Linux) must be used. Shared libraries are now
+       built by default on all Unix type hosts.
+
+    Do site-specific build configuration
+
+       Site configuration
+       To configure EPICS, you may want to modify the default definitions in
+       the following files:
+
+         configure/CONFIG_SITE      Build choices. Specify target archs.
+         configure/CONFIG_SITE_ENV  Environment variable defaults
+         configure/RELEASE          TORNADO2 full path location
+
+       Host configuration
+       To configure each host system, you may override the default
+       definitions by adding a new file in the configure/os directory with
+       override definitions. The new file should have the same name as the
+       distribution file to be overridden except with CONFIG in the name
+       changed to CONFIG_SITE.
+
+         configure/os/CONFIG.<host>.<host>      Host build settings
+         configure/os/CONFIG.<host>.Common      Host common build settings
+
+       Target configuration
+       To configure each target system, you may override the default
+       definitions by adding a new file in the configure/os directory with
+       override definitions. The new file should have the same name as the
+       distribution file to be overridden except with CONFIG in the name
+       replaced by CONFIG_SITE. This step is necessary even if the host
+       system is the only target system.
+
+         configure/os/CONFIG.Common.<target>     Target common settings
+         configure/os/CONFIG.<host>.<target>     Host-target settings
+
+    Build EPICS base
+
+       After configuring the build you should be able to build EPICS base by
+       issuing the following commands in the distribution's root directory
+       (base):
+
+         gnumake clean uninstall
+         gnumake
+
+       The command "gnumake clean uninstall" will remove all files and
+       directories generated by a previous build. The command "gnumake" will
+       build and install everything for the configured host and targets.
+
+       It is recommended that you do a "gnumake clean uninstall" at the root
+       directory of an EPICS directory structure before each complete rebuild
+       to ensure that all components will be rebuilt.
+
+  Example application and extension
+
+     A perl tool, makeBaseApp.pl is included in the distribution file. This
+     script will create a sample application that can be built and then
+     executed to try out this release of base.
+
+     Instructions for building and executing the example IOC application can
+     be found in the section "Example Application" of Chapter 2, "Getting
+     Started", in the "IOC Application Developer's Guide" for this release.
+     The "Example IOC Application" section briefly explains how to create and
+     build an example application in a user created <top> directory. It also
+     explains how to run the example application on a vxWorks ioc or as a
+     process on the host system. By running the example application as a
+     host-based IOC, you will be able to quickly implement a complete EPICS
+     system and be able to run channel access clients on the host system.
+
+     A perl script, makeBaseExt.pl, is included in the distribution file.
+     This script will create a sample extension that can be built and
+     executed. The makeBaseApp.pl and makeBaseExt.pl scripts are installed
+     into the install location bin/<hostarch> directory during the base
+     build.
+
+  Multiple host platforms
+
+     You can build using a single EPICS directory structure on multiple host
+     systems and for multiple cross target systems. The intermediate and
+     binary files generated by the build will be created in separate
+     subdirectories and installed into the appropriate separate host/target
+     install directories. EPICS executables and perl scripts are installed
+     into the $(INSTALL_LOCATION)/bin/<arch> directories. Libraries are
+     installed into $(INSTALL_LOCATION)/lib/<arch>. The default definition
+     for $(INSTALL_LOCATION) is $(TOP) which is the root directory in the
+     distribution directory structure, base. Created object files are stored
+     in O.<arch> source subdirectories, This allows objects for multiple
+     cross target architectures to be maintained at the same time. To build
+     EPICS base for a specific host/target combination you must have the
+     proper host/target C/C++ cross compiler and target header files and the
+     base/configure/os directory must have the appropriate configure files.

documentation/README.html

@@ -0,0 +1,382 @@
+<!DOCTYPE HTML>
+<!-- Generate the README.1st file from this file using:
+    elinks -dump -no-numbering -no-references -dump-width 80 README.html
+  -->
+<HTML>
+<HEAD>
+<TITLE>README - EPICS Base Installation Instructions</TITLE>
+</HEAD>
+<BODY>
+<CENTER>
+<H1>Installation Instructions</H1>
+<H2>EPICS Base Release 7.0.2</H2><BR>
+</CENTER>
+<HR>
+<H3> Table of Contents</H3>
+<UL>
+<LI><A HREF="#0_0_1"> What is EPICS base?</A></LI>
+<LI><A HREF="#0_0_2"> What is new in this release?</A></LI>
+<LI><A HREF="#0_0_3"> Copyright</A></LI>
+<LI><A HREF="#0_0_4"> Supported platforms</A></LI>
+<LI><A HREF="#0_0_5"> Supported compilers</A></LI>
+<LI><A HREF="#0_0_6"> Software requirements</A></LI>
+<LI><A HREF="#0_0_7"> Host system storage requirements</A></LI>
+<LI><A HREF="#0_0_8"> Documentation</A></LI>
+<LI><A HREF="#0_0_10"> Directory Structure</A></LI>
+<LI><A HREF="#0_0_11"> Build related components</A></LI>
+<LI><A HREF="#0_0_12"> Building EPICS base (Unix and Win32)</A></LI>
+<LI><A HREF="#0_0_13"> Example application and extension</A></LI>
+<LI><A HREF="#0_0_14"> Multiple host platforms</A></LI>
+</UL>
+<HR>
+
+<H3><A NAME="0_0_1"> What is EPICS base?</A></H3>
+<BLOCKQUOTE>The Experimental Physics and Industrial Control Systems
+ (EPICS) is an extensible set of software components and tools with
+ which application developers can create a control system. This control
+ system can be used to control accelerators, detectors, telescopes, or
+ other scientific experimental equipment. EPICS base is the set of core
+ software, i.e. the components of EPICS without which EPICS would not
+ function. EPICS base allows an arbitrary number of target systems, IOCs
+ (input/output controllers), and host systems, OPIs (operator
+ interfaces) of various types.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_2"> What is new in this release?</A></H3>
+<BLOCKQUOTE> Please check the RELEASE_NOTES file in the distribution for
+ description of changes and release migration details.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_3"> Copyright</A></H3>
+<BLOCKQUOTE>Please review the LICENSE file included in the
+ distribution for legal terms of usage.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_4"> Supported platforms</A></H3>
+
+<BLOCKQUOTE>The list of platforms supported by this version of EPICS base
+ is given in the configure/CONFIG_SITE file. If you are trying to build
+ EPICS Base on an unlisted host or for a different target machine you
+ must have the proper host/target cross compiler and header files, and
+ you will have to create and add the appropriate new configure files to
+ the base/configure/os/directory. You can start by copying existing
+ configuration files in the configure/os directory and then make changes
+ for your new platforms.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_5"> Supported compilers</A></H3>
+
+<BLOCKQUOTE>This version of EPICS base has been built and tested using the host
+ vendor's C and C++ compilers, as well as the GNU gcc and g++ compilers. The GNU
+ cross-compilers work for all cross-compiled targets. You may need the C and C++
+ compilers to be in your search path to do EPICS builds; check the definitions
+ of CC and CCC in base/configure/os/CONFIG.&lt;host&gt;.&lt;host&gt; if you have
+ problems.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_6"> Software requirements</A></H3>
+
+<BLOCKQUOTE><B>GNU make</B><BR>
+ You must use the GNU version of make for EPICS builds, and we now recommend
+ version 4.1 or later (version 3.82 may work on Linux, but doesn't on Windows).
+
+<P><B>Perl</B><BR>
+ You must have Perl version 5.8.1 or later installed. The EPICS configuration
+ files do not specify the perl full pathname, so the perl executable must
+ be found through your normal search path.</P>
+
+<P><B>Unzip and tar (Winzip on WIN32 systems)</B><BR>
+ You must have tools available to unzip and untar the EPICS base
+ distribution file.</P>
+
+<P><B>Target systems</B><BR>
+ EPICS supports IOCs running on embedded platforms such as VxWorks
+ and RTEMS built using a cross-compiler, and also supports soft IOCs running
+ as processes on the host platform.</P>
+
+<P><B>vxWorks</B><BR>
+ You must have vxWorks 6 installed if any of your target systems are vxWorks
+ systems; the C++ compilers for vxWorks 5.x are now too old to support. The
+ vxWorks installation provides the cross-compiler and header files needed to
+ build for these targets. The absolute path to and the version number of the
+ vxWorks installation must be set in the
+ base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
+ target-specific overrides.</P>
+
+<P>Consult the <a href="https://epics.anl.gov/base/vxWorks6.php">vxWorks
+ 6.x</a> EPICS web pages and the vxWorks documentation for information
+ about configuring your vxWorks operating system for use with EPICS.</P>
+
+<P><B>RTEMS</B><BR>
+ For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or 4.10. The
+ newer 4.11 or 5.x releases are not supported yet.</P>
+
+<P><B>Command-line editing libraries</B><BR>
+
+ GNU readline or other OS-specific libraries can be used by the IOC shell to
+ provide command line editing and history recall. The default setting is
+ different for each OS. On Linux the default is to use READLINE since most
+ distributions include it. On MacOS the default is also READLINE since Apple
+ provides a compatible library, although it isn't GNU. On RTEMS we support GNU
+ readline and Tecla, although the default is to use neither since these have to
+ be added to the RTEMS installation separately. On vxWorks we support the
+ built-in ledLib library.</P>
+
+</BLOCKQUOTE>
+
+<H3><A NAME="0_0_7"> Host system storage requirements</A></H3>
+
+<BLOCKQUOTE>The compressed tar file is approximately 1.6 MB in size. The
+ distribution source tree takes up approximately 12 MB. Each host target will
+ need around 40 MB for build files, and each cross-compiled target around 20
+ MB.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_8"> Documentation</A></H3>
+<BLOCKQUOTE>EPICS documentation is available through the
+ <a href="https://epics.anl.gov/">EPICS website</a> at Argonne.
+ <P>Release specific documentation can also be found in the base/documentation
+ directory of the distribution.</BLOCKQUOTE>
+
+<H3><A NAME="0_0_10"> Directory Structure</A></H3>
+<BLOCKQUOTE><H4>Distribution directory structure:</H4>
+
+<PRE>
+        base                    Root directory of the base distribution
+        base/configure          Operating system independent build config files
+        base/configure/os       Operating system dependent build config files
+        base/documentation      Distribution documentation
+        base/src                Source code in various subdirectories
+        base/startup            Scripts for setting up path and environment
+</PRE>
+
+<H4>Install directories created by the build:</H4>
+<PRE>
+        bin                     Installed scripts and executables in subdirs
+        cfg                     Installed build configuration files
+        db                      Installed data bases
+        dbd                     Installed data base definitions
+        doc                     Installed documentation files
+        html                    Installed html documentation
+        include                 Installed header files
+        include/os              Installed os specific header files in subdirs
+        include/compiler        Installed compiler-specific header files
+        lib                     Installed libraries in arch subdirectories
+        lib/perl                Installed perl modules
+        templates               Installed templates
+</PRE>
+</BLOCKQUOTE>
+
+<H3><A NAME="0_0_11"> Build related components</A></H3>
+<BLOCKQUOTE>
+
+<H4>base/documentation directory - contains setup, build, and install
+ documents</H4>
+ <PRE>
+        README.1st           Instructions for setup and building epics base
+        README.html          html version of README.1st
+        README.darwin.html   Installation notes for Mac OS X (Darwin)
+        RELEASE_NOTES.html   Notes on release changes
+        KnownProblems.html   List of known problems and workarounds
+</PRE>
+
+<H4>base/startup directory - contains scripts to set environment and path</H4>
+<PRE>
+        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
+        unix.csh            C shell script to set path and env variables
+        unix.sh             Bourne shell script to set path and env variables
+        win32.bat           Bat file example to configure win32-x86 target
+        windows.bat         Bat file example to configure windows-x64 target
+</PRE>
+
+<H4>base/configure directory - contains build definitions and rules</H4>
+<PRE>
+        CONFIG                Includes configure files and allows variable overrides
+        CONFIG.CrossCommon    Cross build definitions
+        CONFIG.gnuCommon      Gnu compiler build definitions for all archs
+        CONFIG_ADDONS         Definitions for &lt;osclass&gt; and DEFAULT options
+        CONFIG_APP_INCLUDE
+        CONFIG_BASE           EPICS base tool and location definitions
+        CONFIG_BASE_VERSION   Definitions for EPICS base version number
+        CONFIG_COMMON         Definitions common to all builds
+        CONFIG_ENV            Definitions of EPICS environment variables
+        CONFIG_FILE_TYPE
+        CONFIG_SITE           Site specific make definitions
+        CONFIG_SITE_ENV       Site defaults for EPICS environment variables
+        MAKEFILE              Installs CONFIG* RULES* creates
+        RELEASE               Location of external products
+        RULES                 Includes appropriate rules file
+        RULES.Db              Rules for database and database definition files
+        RULES.ioc             Rules for application iocBoot/ioc* directory
+        RULES_ARCHS           Definitions and rules for building architectures
+        RULES_BUILD           Build and install rules and definitions
+        RULES_DIRS            Definitions and rules for building subdirectories
+        RULES_EXPAND
+        RULES_FILE_TYPE
+        RULES_TARGET
+        RULES_TOP             Rules specific to a &lt;top&gt; dir (uninstall and tar)
+        Sample.Makefile       Sample makefile with comments
+</PRE>
+
+<H4>base/configure/os directory - contains os-arch specific definitions</H4>
+<PRE>
+        CONFIG.&lt;host&gt;.&lt;target&gt;      Specific host-target build definitions
+        CONFIG.Common.&lt;target&gt;      Specific target definitions for all hosts
+        CONFIG.&lt;host&gt;.Common        Specific host definitions for all targets
+        CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
+        CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
+        CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
+        CONFIG_SITE.&lt;host&gt;.&lt;target&gt; Site specific host-target definitions
+        CONFIG_SITE.Common.&lt;target&gt; Site specific target defs for all hosts
+        CONFIG_SITE.&lt;host&gt;.Common   Site specific host defs for all targets
+</PRE>
+
+</BLOCKQUOTE>
+
+<H3><A NAME="0_0_12"> Building EPICS base (Unix and Win32)</A></H3>
+<BLOCKQUOTE>
+
+<H4> Unpack file</H4>
+<BLOCKQUOTE>
+Unzip and untar the distribution file. Use WinZip on Windows
+ systems.
+</BLOCKQUOTE>
+
+<H4>Set environment variables</H4>
+<BLOCKQUOTE>
+Files in the base/startup directory have been provided to
+ help set required path and other environment variables.
+
+<P><B>EPICS_HOST_ARCH</B><BR>
+ Before you can build or use EPICS Base, the environment variable
+ EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in the
+ base/startup directory has been provided to help set EPICS_HOST_ARCH.
+ You should have EPICS_HOST_ARCH set to your host operating system
+ followed by a dash and then your CPU architecture, e.g. linux-x86_64.
+ If you are not using the OS vendor's c/c++ compiler for host builds,
+ you will need another dash followed by the alternate compiler name
+ (e.g. &quot;-gnu&quot; for GNU c/c++ compilers on a solaris host or &quot;-mingw&quot;
+ for MinGW c/c++ compilers on a WIN32 host). See configure/CONFIG_SITE
+ for a list of supported EPICS_HOST_ARCH values.</P>
+
+<P><B>PERLLIB</B><BR>
+ On WIN32, some versions of Perl require that the environment
+ variable PERLLIB be set to &lt;perl directory location&gt;.</P>
+
+<P><B>PATH</B><BR>
+ As already mentioned, you must have the perl executable and you may
+ need C and C++ compilers in your search path. For building base you
+ also must have echo in your search path. For Unix host builds you also
+ need ln, cpp, cp, rm, mv, and mkdir in your search path and /bin/chmod
+ must exist. On some Unix systems you may also need ar and ranlib in
+ your path, and the C compiler may require as and ld in your path. On
+ solaris systems you need uname in your path.</P>
+
+<P><B>LD_LIBRARY_PATH</B><BR>
+
+ EPICS shared libraries and executables normally contain the full path
+ to any libraries they require.
+ However, if you move the EPICS files or directories from their build-time
+ location then in order for the shared libraries to be found at runtime
+ LD_LIBRARY_PATH must include the full pathname to
+ $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking executables, or
+ some equivalent OS-specific mechanism (such as /etc/ld.so.conf on Linux)
+ must be used.
+ Shared libraries are now built by default on all Unix type hosts.</P>
+</BLOCKQUOTE>
+
+<H4>Do site-specific build configuration</H4>
+<BLOCKQUOTE>
+
+<B>Site configuration</B><BR>
+ To configure EPICS, you may want to modify the default definitions
+ in the following files:
+<PRE>
+        configure/CONFIG_SITE      Build choices. Specify target archs.
+        configure/CONFIG_SITE_ENV  Environment variable defaults
+        configure/RELEASE          TORNADO2 full path location
+</PRE>
+
+<B> Host configuration</B><BR>
+ To configure each host system, you may override the default
+ definitions by adding a new file in the configure/os directory with
+ override definitions. The new file should have the same name as the
+ distribution file to be overridden except with CONFIG in the name
+ changed to CONFIG_SITE.
+
+<PRE>
+        configure/os/CONFIG.&lt;host&gt;.&lt;host&gt;      Host build settings
+        configure/os/CONFIG.&lt;host&gt;.Common      Host common build settings
+</PRE>
+
+<B>Target configuration</B><BR>
+ To configure each target system, you may override the default
+ definitions by adding a new file in the configure/os directory with
+ override definitions. The new file should have the same name as the
+ distribution file to be overridden except with CONFIG in the name
+ replaced by CONFIG_SITE. This step is necessary even if the host system
+ is the only target system.
+ <PRE>
+        configure/os/CONFIG.Common.&lt;target&gt;     Target common settings
+        configure/os/CONFIG.&lt;host&gt;.&lt;target&gt;     Host-target settings
+</PRE>
+</BLOCKQUOTE>
+
+<H4>Build EPICS base</H4>
+<BLOCKQUOTE>After configuring the build you should be able to build
+ EPICS base by issuing the following commands in the distribution's root
+ directory (base):
+ <PRE>
+        gnumake clean uninstall
+        gnumake
+</PRE>
+
+ The command &quot;gnumake clean uninstall&quot;
+ will remove all files and directories generated by a previous build.
+ The command &quot;gnumake&quot; will build and install everything for the
+ configured host and targets.
+
+<P> It is recommended that you do a &quot;gnumake clean uninstall&quot; at the
+ root directory of an EPICS directory structure before each complete
+ rebuild to ensure that all components will be rebuilt.
+</BLOCKQUOTE>
+</BLOCKQUOTE>
+
+<H3><A NAME="0_0_13"> Example application and extension</A></H3>
+<BLOCKQUOTE>A perl tool, makeBaseApp.pl is included in the distribution
+ file. This script will create a sample application that can be built
+ and then executed to try out this release of base.
+
+<P>
+ Instructions for building and executing the example IOC application
+ can be found in the section &quot;Example Application&quot; of Chapter 2,
+ &quot;Getting Started&quot;, in the &quot;IOC Application Developer's Guide&quot; for this
+ release. The &quot;Example IOC Application&quot; section briefly explains how to
+ create and build an example application in a user created &lt;top&gt;
+ directory. It also explains how to run the example application on a
+ vxWorks ioc or as a process on the host system.
+ By running the example application as a host-based IOC, you will be
+ able to quickly implement a complete EPICS system and be able to run channel
+ access clients on the host system.
+
+<P>
+ A perl script,
+ makeBaseExt.pl, is included in the distribution file. This script will
+ create a sample extension that can be built and executed. The
+ makeBaseApp.pl and makeBaseExt.pl scripts are installed into the
+ install location bin/&lt;hostarch&gt; directory during the base build.
+</BLOCKQUOTE>
+
+<H3><A NAME="0_0_14"> Multiple host platforms</A></H3>
+<BLOCKQUOTE>You can build using a single EPICS directory structure on
+ multiple host systems and for multiple cross target systems. The
+ intermediate and binary files generated by the build will be created in
+ separate subdirectories and installed into the appropriate separate
+ host/target install directories. EPICS executables and perl scripts are
+ installed into the <TT>$(INSTALL_LOCATION)/bin/&lt;arch&gt;</TT> directories.
+ Libraries are installed into $<TT>(INSTALL_LOCATION)/lib/&lt;arch&gt;</TT>.
+ The default definition for <TT>$(INSTALL_LOCATION)</TT> is <TT>$(TOP)</TT>
+ which is the root directory in the distribution directory structure,
+ base. Created object files are stored in O.&lt;arch&gt; source
+ subdirectories, This allows objects for multiple cross target
+ architectures to be maintained at the same time. To build EPICS base
+ for a specific host/target combination you must have the proper
+ host/target C/C++ cross compiler and target header files and the
+ base/configure/os directory must have the appropriate configure files.
+</BLOCKQUOTE>
+</BODY>
+</HTML>

documentation/README.md

@@ -1,373 +0,0 @@
-# Installation Instructions
-
-## EPICS Base Release 3.15.7
-
------
-
-### Table of Contents
-
-  - [What is EPICS base?](#0_0_1)
-  - [What is new in this release?](#0_0_2)
-  - [Copyright](#0_0_3)
-  - [Supported platforms](#0_0_4)
-  - [Supported compilers](#0_0_5)
-  - [Software requirements](#0_0_6)
-  - [Host system storage requirements](#0_0_7)
-  - [Documentation](#0_0_8)
-  - [Directory Structure](#0_0_10)
-  - [Build related components](#0_0_11)
-  - [Building EPICS base (Unix and Win32)](#0_0_12)
-  - [Example application and extension](#0_0_13)
-  - [Multiple host platforms](#0_0_14)
-
------
-
-### <span id="0_0_1">What is EPICS base?</span>
-
-The Experimental Physics and Industrial Control Systems (EPICS) is an
-extensible set of software components and tools with which application
-developers can create a control system. This control system can be
-used to control accelerators, detectors, telescopes, or other
-scientific experimental equipment. EPICS base is the set of core
-software, i.e. the components of EPICS without which EPICS would not
-function. EPICS base allows an arbitrary number of target systems,
-IOCs (input/output controllers), and host systems, OPIs (operator
-interfaces) of various types.
-
-### <span id="0_0_2">What is new in this release?</span>
-
-Please check the `RELEASE_NOTES` file in the distribution for
-description of changes and release migration details.
-
-### <span id="0_0_3">Copyright</span>
-
-Please review the LICENSE file included in the distribution for legal
-terms of usage.
-
-### <span id="0_0_4">Supported platforms</span>
-
-The list of platforms supported by this version of EPICS base is given
-in the `configure/CONFIG_SITE` file. If you are trying to build EPICS
-Base on an unlisted host or for a different target machine you must
-have the proper host/target cross compiler and header files, and you
-will have to create and add the appropriate new configure files to the
-base/configure/os/directory. You can start by copying existing
-configuration files in the configure/os directory and then make
-changes for your new platforms.
-
-### <span id="0_0_5">Supported compilers</span>
-
-This version of EPICS base has been built and tested using the host
-vendor's C and C++ compilers, as well as the GNU gcc and g++
-compilers. The GNU cross-compilers work for all cross-compiled
-targets. You may need the C and C++ compilers to be in your search
-path to do EPICS builds; check the definitions of CC and CCC in
-base/configure/os/CONFIG.&lt;host>.&lt;host> if you have problems.
-
-### <span id="0_0_6">Software requirements</span>
-
-**GNU make**
-You must use GNU make, gnumake, for any EPICS builds. Set your path so
-that a gnumake version 3.81 or later is available.
-
-**Perl**
-You must have Perl version 5.8.1 or later installed. The EPICS
-configuration files do not specify the perl full pathname, so the perl
-executable must be found through your normal search path.
-
-**Unzip and tar (Winzip on WIN32 systems)**
-You must have tools available to unzip and untar the EPICS base
-distribution file.
-
-**Target systems**
-EPICS supports IOCs running on embedded platforms such as VxWorks and
-RTEMS built using a cross-compiler, and also supports soft IOCs
-running as processes on the host platform.
-
-**vxWorks**
-You must have vxWorks 5.5.x or 6.x installed if any of your target
-systems are vxWorks systems; the C++ compiler for vxWorks 5.4 is now
-too old to support. The vxWorks installation provides the
-cross-compiler and header files needed to build for these targets. The
-absolute path to and the version number of the vxWorks installation
-must be set in the `base/configure/os/CONFIG_SITE.Common.vxWorksCommon`
-file or in one of its target-specific overrides.
-
-Consult the [vxWorks 5.x](https://epics.anl.gov/base/tornado.php) or
-[vxWorks 6.x](https://epics.anl.gov/base/vxWorks6.php) EPICS web pages
-about and the vxWorks documentation for information about configuring
-your vxWorks operating system for use with EPICS.
-
-**RTEMS**
-For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
-later.
-
-**GNU readline or Tecla library**
-GNU readline and Tecla libraries can be used by the IOC shell to
-provide command line editing and command line history recall and edit.
-GNU readline (or Tecla library) must be installed on your target
-system when `COMMANDLINE_LIBRARY` is set to READLINE (or TECLA) for
-that target. EPICS (EPICS shell) is the default specified in
-`CONFIG_COMMON`. A READLINE override is defined for linux-x86 in the
-EPICS distribution. Comment out `COMMANDLINE_LIBRARY=READLINE` in
-`configure/os/CONFIG_SITE.Common.linux-x86` if readline is not
-installed on linux-x86. Command-line editing and history will then be
-those supplied by the os. On vxWorks the ledLib command-line input
-library is used instead.
-
-### <span id="0_0_7">Host system storage requirements</span>
-
-The compressed tar file is approximately 1.6 MB in size. The
-distribution source tree takes up approximately 12 MB. Each host
-target will need around 40 MB for build files, and each cross-compiled
-target around 20 MB.
-
-### <span id="0_0_8">Documentation</span>
-
-EPICS documentation is available through the [EPICS
-website](https://epics.anl.gov/) at Argonne.
-
-Release specific documentation can also be found in the
-base/documentation directory of the distribution.
-
-### <span id="0_0_10">Directory Structure</span>
-
-#### Distribution directory structure:
-
-```
-        base                    Root directory of the base distribution
-        base/configure          Operating system independent build config files
-        base/configure/os       Operating system dependent build config files
-        base/documentation      Distribution documentation
-        base/src                Source code in various subdirectories
-        base/startup            Scripts for setting up path and environment
-```
-
-#### Install directories created by the build:
-
-```
-        bin                     Installed scripts and executables in subdirs
-        cfg                     Installed build configuration files
-        db                      Installed data bases
-        dbd                     Installed data base definitions
-        doc                     Installed documentation files
-        html                    Installed html documentation
-        include                 Installed header files
-        include/os              Installed os specific header files in subdirs
-        include/compiler        Installed compiler-specific header files
-        lib                     Installed libraries in arch subdirectories
-        lib/perl                Installed perl modules
-        templates               Installed templates
-```
-
-### <span id="0_0_11">Build related components</span>
-
-#### base/documentation directory - contains setup, build, and install documents
-
-```
-        README.md            Instructions for setup and building epics base
-        README.darwin.html   Installation notes for Mac OS X (Darwin)
-        RELEASE_NOTES.html   Notes on release changes
-        KnownProblems.html   List of known problems and workarounds
-```
-
-#### base/startup directory - contains scripts to set environment and path
-
-```
-        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
-        unix.csh            C shell script to set path and env variables
-        unix.sh             Bourne shell script to set path and env variables
-        win32.bat           Bat file example to configure win32-x86 target
-        windows.bat         Bat file example to configure windows-x64 target
-```
-
-#### base/configure directory - contains build definitions and rules
-
-```
-        CONFIG                Includes configure files and allows variable overrides
-        CONFIG.CrossCommon    Cross build definitions
-        CONFIG.gnuCommon      Gnu compiler build definitions for all archs
-        CONFIG_ADDONS         Definitions for &lt;osclass> and DEFAULT options
-        CONFIG_APP_INCLUDE
-        CONFIG_BASE           EPICS base tool and location definitions
-        CONFIG_BASE_VERSION   Definitions for EPICS base version number
-        CONFIG_COMMON         Definitions common to all builds
-        CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_FILE_TYPE
-        CONFIG_SITE           Site specific make definitions
-        CONFIG_SITE_ENV       Site defaults for EPICS environment variables
-        MAKEFILE              Installs CONFIG* RULES* creates
-        RELEASE               Location of external products
-        RULES                 Includes appropriate rules file
-        RULES.Db              Rules for database and database definition files
-        RULES.ioc             Rules for application iocBoot/ioc* directory
-        RULES_ARCHS           Definitions and rules for building architectures
-        RULES_BUILD           Build and install rules and definitions
-        RULES_DIRS            Definitions and rules for building subdirectories
-        RULES_EXPAND
-        RULES_FILE_TYPE
-        RULES_TARGET
-        RULES_TOP             Rules specific to a &lt;top> dir (uninstall and tar)
-        Sample.Makefile       Sample makefile with comments
-```
-
-#### base/configure/os directory - contains os-arch specific definitions
-
-```
-        CONFIG.&lt;host>.&lt;target>      Specific host-target build definitions
-        CONFIG.Common.&lt;target>      Specific target definitions for all hosts
-        CONFIG.&lt;host>.Common        Specific host definitions for all targets
-        CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
-        CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
-        CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
-        CONFIG_SITE.&lt;host>.&lt;target> Site specific host-target definitions
-        CONFIG_SITE.Common.&lt;target> Site specific target defs for all hosts
-        CONFIG_SITE.&lt;host>.Common   Site specific host defs for all targets
-```
-
-### <span id="0_0_12">Building EPICS base (Unix and Win32)</span>
-
-#### Unpack file
-
-Unzip and untar the distribution file. Use WinZip on Windows
-systems.
-
-#### Set environment variables
-
-Files in the base/startup directory have been provided to help set
-required path and other environment variables.
-
-* `EPICS_HOST_ARCH`
-Before you can build or use EPICS R3.15, the environment variable
-`EPICS_HOST_ARCH` must be defined. A perl script EpicsHostArch.pl in
-the base/startup directory has been provided to help set
-`EPICS_HOST_ARCH.` You should have `EPICS_HOST_ARCH` set to your
-host operating system followed by a dash and then your host
-architecture, e.g. solaris-sparc. If you are not using the OS
-vendor's c/c++ compiler for host builds, you will need another dash
-followed by the alternate compiler name (e.g. "-gnu" for GNU c/c++
-compilers on a solaris host or "-mingw" for MinGW c/c++ compilers on
-a WIN32 host). See `configure/CONFIG_SITE` for a list of supported
-`EPICS_HOST_ARCH` values.
-
-* `PERLLIB`
-On WIN32, some versions of Perl require that the environment
-variable PERLLIB be set to &lt;perl directory location>.
-
-* `PATH`
-As already mentioned, you must have the perl executable and you may
-need C and C++ compilers in your search path. For building base you
-also must have echo in your search path. For Unix host builds you
-also need ln, cpp, cp, rm, mv, and mkdir in your search path and
-/bin/chmod must exist. On some Unix systems you may also need ar and
-ranlib in your path, and the C compiler may require as and ld in
-your path. On solaris systems you need uname in your path.
-
-* `LD_LIBRARY_PATH`
-R3.15 shared libraries and executables normally contain the full
-path to any libraries they require. However, if you move the EPICS
-files or directories from their build-time location then in order
-for the shared libraries to be found at runtime `LD_LIBRARY_PATH`
-must include the full pathname to
-`$(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)` when invoking
-executables, or some equivalent OS-specific mechanism (such as
-/etc/ld.so.conf on Linux) must be used. Shared libraries are now
-built by default on all Unix type hosts.
-
-#### Do site-specific build configuration
-
-**Site configuration**
-To configure EPICS, you may want to modify the default definitions
-in the following files:
-
-```
-        configure/CONFIG_SITE      Build choices. Specify target archs.
-        configure/CONFIG_SITE_ENV  Environment variable defaults
-        configure/RELEASE          TORNADO2 full path location
-```
-
-**Host configuration**
-To configure each host system, you may override the default
-definitions by adding a new file in the configure/os directory with
-override definitions. The new file should have the same name as the
-distribution file to be overridden except with CONFIG in the name
-changed to `CONFIG_SITE`.
-
-```
-        configure/os/CONFIG.&lt;host>.&lt;host>      Host build settings
-        configure/os/CONFIG.&lt;host>.Common      Host common build settings
-```
-
-**Target configuration**
-To configure each target system, you may override the default
-definitions by adding a new file in the configure/os directory with
-override definitions. The new file should have the same name as the
-distribution file to be overridden except with CONFIG in the name
-replaced by `CONFIG_SITE`. This step is necessary even if the host
-system is the only target system.
-
-```
-        configure/os/CONFIG.Common.&lt;target>     Target common settings
-        configure/os/CONFIG.&lt;host>.&lt;target>     Host-target settings
-```
-
-#### Build EPICS base
-
-After configuring the build you should be able to build EPICS base
-by issuing the following commands in the distribution's root
-directory (base):
-
-```
-        gnumake clean uninstall
-        gnumake
-```
-
-The command "gnumake clean uninstall" will remove all files and
-directories generated by a previous build. The command "gnumake"
-will build and install everything for the configured host and
-targets.
-
-It is recommended that you do a "gnumake clean uninstall" at the
-root directory of an EPICS directory structure before each complete
-rebuild to ensure that all components will be rebuilt.
-
-### <span id="0_0_13">Example application and extension</span>
-
-A perl tool, makeBaseApp.pl is included in the distribution file. This
-script will create a sample application that can be built and then
-executed to try out this release of base.
-
-Instructions for building and executing the 3.15 example application
-can be found in the section "Example Application" of Chapter 2,
-"Getting Started", in the "IOC Application Developer's Guide" for this
-release. The "Example IOC Application" section briefly explains how to
-create and build an example application in a user created &lt;top>
-directory. It also explains how to run the example application on a
-vxWorks ioc or as a process on the host system. By running the example
-application as a host-based IOC, you will be able to quickly implement
-a complete EPICS system and be able to run channel access clients on
-the host system.
-
-A perl script, makeBaseExt.pl, is included in the distribution file.
-This script will create a sample extension that can be built and
-executed. The makeBaseApp.pl and makeBaseExt.pl scripts are installed
-into the install location bin/&lt;hostarch> directory during the base
-build.
-
-### <span id="0_0_14">Multiple host platforms</span>
-
-You can build using a single EPICS directory structure on multiple
-host systems and for multiple cross target systems. The intermediate
-and binary files generated by the build will be created in separate
-subdirectories and installed into the appropriate separate host/target
-install directories. EPICS executables and perl scripts are installed
-into the `$(INSTALL_LOCATION)/bin/<arch>` directories. Libraries are
-installed into $`(INSTALL_LOCATION)/lib/<arch>`. The default
-definition for `$(INSTALL_LOCATION)` is `$(TOP)` which is the root
-directory in the distribution directory structure, base. Created
-object files are stored in O.&lt;arch> source subdirectories, This
-allows objects for multiple cross target architectures to be
-maintained at the same time. To build EPICS base for a specific
-host/target combination you must have the proper host/target C/C++
-cross compiler and target header files and the base/configure/os
-directory must have the appropriate configure files.

documentation/ReleaseChecklist.html

@@ -33,29 +33,28 @@
 <h1>EPICS Base Release Procedures &amp; Checklist</h1>
 
 <p>This document describes the procedures and provides a checklist of tasks
-that should be performed when creating new releases of EPICS Base.</p>
+that should be performed when creating production releases of EPICS Base.</p>
 
 <h3>The Release Process</h3>
 
 <p>The version released on the Feature Freeze date is designated the first
-pre-release, <tt>-pre1</tt>. The first Release Candidate <tt>-rc1</tt> is the
-first version that has undergone widespread testing and which has no known
-problems in it that are slated to be fixed in this release. New versions should
-be made at 2-weekly intervals during the testing and debugging period, and will
-be designated as either pre-release versions or Release Candidates by the
-Release Manager. After a Release Candidate has been available to the whole
-community for testing for at least a week without any additional problems being
-reported or significant changes being committed, the branch can be designated as
-the final release version.</p>
+pre-release, <tt>-pre1</tt>. The first release candidate <tt>-rc1</tt> is the
+first version that has undergone testing by the developers and has shown no
+problems that must be fixed before release. New versions should be made at about
+2-weekly intervals after the <tt>-pre1</tt> release, and designated as either
+pre-release or release candidate versions by the Release Manager. Release
+candidates are announced to the whole community via the tech-talk mailing list,
+pre-releases are announced to to the developers via the core-talk list. After a
+release candidate has been available for 2 weeks without any new problems being
+reported or major changes having to be committed, the final release can be
+made.</p>
 
 <h3>Roles</h3>
 
-<p>The following roles are required. The individuals named here have have been
-responsible for these tasks in the past and are expected to continue in the
-relevent roles unless the Release Manager designates otherwise:</p>
+<p>The following roles are used below:</p>
 
 <dl>
-  <dt><strong>Release Manager</strong> (Ralph Lange)</dt>
+  <dt><strong>Release Manager</strong> ()</dt>
     <dd>Responsible for managing and tagging the release</dd>
   <dt><strong>Platform Developers</strong> (optional)</dt>
     <dd>Responsible for individual operating system platforms</dd>
@@ -79,7 +78,7 @@ relevent roles unless the Release Manager designates otherwise:</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Email all developers about the upcoming release and ask for a list
-        of remaining jobs that must be finished.</td>
+        of remaining tasks that must be finished.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -112,7 +111,7 @@ relevent roles unless the Release Manager designates otherwise:</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Review and update this document for the upcoming release.</td>
+      <td>Review and update this checklist for the upcoming release.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -127,6 +126,7 @@ relevent roles unless the Release Manager designates otherwise:</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
+      <!-- Submodules... -->
       <td>Edit and commit changes to the EPICS version number file
         configure/CONFIG_BASE_VERSION.</td>
       </tr>
@@ -136,19 +136,21 @@ relevent roles unless the Release Manager designates otherwise:</p>
       <td>Tag the module in Git, using these tag conventions:
         <ul>
           <li>
-            <tt>R3.15.7-pre1</tt>
+            <tt>R7.0.2-pre<i>n</i></tt>
             &mdash; pre-release tag
             </li>
           <li>
-            <tt>R3.15.7-rc1</tt>
+            <tt>R7.0.2-rc<i>n</i></tt>
             &mdash; release candidate tag
             </li>
-        </ul>
+          </ul>
         <blockquote><tt>
-          cd base-3.15<br />
-          git tag -m 'ANJ: Tagged for 3.15.7-rc1' R3.15.7-rc1
+          cd base-7.0<br />
+          git tag -m 'ANJ: Tagged for 7.0.2-rc1' R7.0.2-rc1
           </tt></blockquote>
-        </td>
+        Note that submodules must <em>not</em> be tagged with the version used
+        for the top-level, they each have their own separate version numbers
+        that are only tagged at the final release.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -157,12 +159,12 @@ relevent roles unless the Release Manager designates otherwise:</p>
         script generates a gzipped tarfile directly from the tag, excluding the
         files and directories that are only used for continuous integration:
         <blockquote><tt>
-          cd base-3.15<br />
-          git archive --prefix=base-3.15.7-rc1/ --output=base-3.15.7-rc1.tar.gz R3.15.7-rc1 configure documentation LICENSE Makefile README src startup
+          cd base-7.0<br />
+          ./.tools/make-tar.sh R7.0.2-rc1 base-7.0.2-rc1.tar.gz base-7.0.2-rc1/
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-3.15.7-rc1.tar.gz
+          gpg --armor --sign --detach-sig base-7.0.2-rc1.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -175,8 +177,9 @@ relevent roles unless the Release Manager designates otherwise:</p>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>If necessary recreate the tarfile following the instructions above.
-        Copy the tar file to the Base download area of the website</td>
+      <td>Copy the tarfile and its signature to the Base download area of the
+        website and add the new files to the website Base download index
+        page.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -193,11 +196,6 @@ relevent roles unless the Release Manager designates otherwise:</p>
         versions should use the page and URL for the final release version
         number.</td>
       </tr>
-    <tr>
-      <td>&nbsp;</td>
-      <td>Website Manager</td>
-      <td>Add the new tar file to the website Base download index page.</td>
-      </tr>
     <tr>
       <th colspan="3">Testing</th>
       </tr>
@@ -233,7 +231,7 @@ relevent roles unless the Release Manager designates otherwise:</p>
       <td>&nbsp;</td>
       <td>Application Developers</td>
       <td>Build external applications against this version of Base on all
-        available platforms and test as appropriate.  Application code changes
+        available platforms and test as appropriate. Application code changes
         may be necessary where the EPICS Base APIs have been modified.</td>
       </tr>
     <tr>
@@ -249,6 +247,7 @@ relevent roles unless the Release Manager designates otherwise:</p>
           </ul>
         </td>
       </tr>
+
     <tr>
       <th colspan="3">Release Approval</th>
     </tr>
@@ -256,8 +255,8 @@ relevent roles unless the Release Manager designates otherwise:</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Obtain a positive <q>Ok to release</q> from all platform developers
-        once a Release Candidate version has gone a whole week without any
-        issues being reported.</td>
+        once a release candidate version has gone for 2 weeks without any major
+        new issues being reported.</td>
       </tr>
     <tr>
       <th colspan="3">Creating the final release version</th>
@@ -265,31 +264,50 @@ relevent roles unless the Release Manager designates otherwise:</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Edit and commit changes to the EPICS version number file
-        configure/CONFIG_BASE_VERSION.</td>
+      <td>
+        <p>For each external submodule, check if the module's release version
+          number (and SHRLIB_VERSION setting) has been updated if appropriate,
+          and that its Release Notes have been updated to cover any changes.
+          Commit any fixes and tag the module if that hasn't already been
+          done.</p>
+        <p>Update all external submodules on the Base-7.0 branch and
+          commit.</p></td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Tag the module in Git:
+      <td>Edit and commit changes to the EPICS Base version number file and
+        the embedded module version files:
+        <ul>
+          <li>configure/CONFIG_BASE_VERSION </li>
+          <li>modules/libcom/configure/CONFIG_LIBCOM_VERSION</li>
+          <li>modules/ca/configure/CONFIG_CA_VERSION</li>
+          <li>modules/database/configure/CONFIG_DATABASE_VERSION</li>
+          </ul></td>
+      </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Release Manager</td>
+      <td>Tag the epics-base module in Git:
         <blockquote><tt>
-          cd base-3.15<br />
-          git tag -m 'ANJ: Tagged for 3.15.7' R3.15.7
+          cd base-7.0<br />
+          git tag -m 'ANJ: Tagged for 7.0.2' R7.0.2</i>
           </tt></blockquote>
-        </td>
+        Don't push the new tag to the Launchpad repository yet.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Export the tagged version into a tarfile. Note that this command
-        generates a gzipped tarfile directly from the repository:
+      <td>Export the tagged version into a tarfile. The <tt>make-tar.sh</tt>
+        script generates a gzipped tarfile directly from the tag, excluding the
+        files and directories that are only used for continuous integration:
         <blockquote><tt>
-          cd base-3.15<br />
-          git archive --prefix=base-3.15.7/ --output=base-3.15.7.tar.gz R3.15.7 configure documentation LICENSE Makefile README src startup
+          cd base-7.0<br />
+          ./.tools/make-tar.sh R7.0.2 base-7.0.2.tar.gz base-7.0.2/
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-3.15.7.tar.gz
+          gpg --armor --sign --detach-sig base-7.0.2.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -297,12 +315,18 @@ relevent roles unless the Release Manager designates otherwise:</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Test the tar file by extracting its contents and building it on at
-        least one supported platform</td>
+        least one supported platform. When this succeeds the new git tag can be
+        pushed to the Launchpad repository:
+        <blockquote><tt>
+          git push --follow-tags upstream 7.0
+          </tt></blockquote>
+        </td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Upload the release tar file to the Launchpad download area.</td>
+      <td>Copy the tarfile and its signature to the Base download area of the
+        website.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -316,8 +340,8 @@ relevent roles unless the Release Manager designates otherwise:</p>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Copy the tar file and its <tt>.asc</tt> signature file to the Base
-        download area of the website.</td>
+      <td>Upload the tar file and its <tt>.asc</tt> signature file to the
+        Launchpad milestone for this release version.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>

modules/CONFIG_SITE.local

@@ -0,0 +1,10 @@
+#*************************************************************************
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
+#*************************************************************************
+
+# When building submodules, this should always be true:
+INSTALL_LOCATION = $(EPICS_BASE)
+
+# Stop submodules from installing their configuration files:
+CONFIG_INSTALLS =

modules/Makefile

@@ -0,0 +1,58 @@
+#*************************************************************************
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
+#*************************************************************************
+
+TOP = ..
+include $(TOP)/configure/CONFIG
+
+# Submodules for bundle build
+SUBMODULES += libcom
+
+SUBMODULES += ca
+ca_DEPEND_DIRS = libcom
+
+SUBMODULES += database
+database_DEPEND_DIRS = ca
+
+SUBMODULES += pvData
+pvData_DEPEND_DIRS = libcom
+
+SUBMODULES += pvAccess
+pvAccess_DEPEND_DIRS = pvData database
+
+SUBMODULES += normativeTypes
+normativeTypes_DEPEND_DIRS = pvData
+
+SUBMODULES += pvaClient
+pvaClient_DEPEND_DIRS = pvAccess normativeTypes
+
+SUBMODULES += pvDatabase
+pvDatabase_DEPEND_DIRS = pvAccess
+
+SUBMODULES += pva2pva
+pva2pva_DEPEND_DIRS = pvAccess
+
+SUBMODULES += example
+example_DEPEND_DIRS = pva2pva pvaClient
+
+# Allow sites to add extra submodules
+-include Makefile.local
+
+# Add only checked-out submodules to DIRS
+DIRS += $(subst /Makefile,,$(wildcard $(addsuffix /Makefile, $(SUBMODULES))))
+
+include $(TOP)/configure/RULES_DIRS
+
+INSTALL_LOCATION_ABS := $(abspath $(INSTALL_LOCATION))
+RELEASE_LOCAL := RELEASE.$(EPICS_HOST_ARCH).local
+
+# Ensure that RELEASE.<host>.local exists before doing anything else
+all host $(DIRS) $(ARCHS) $(ACTIONS) $(dirActionTargets) $(dirArchTargets) \
+    $(dirActionArchTargets) $(actionArchTargets): | $(RELEASE_LOCAL)
+
+$(RELEASE_LOCAL):
+	$(ECHO) Creating $@, EPICS_BASE = $(INSTALL_LOCATION_ABS)
+	@echo EPICS_BASE = $(INSTALL_LOCATION_ABS)> $@
+realclean:
+	$(RM) $(RELEASE_LOCAL)

modules/ca/.ci/travis-build.sh

@@ -0,0 +1,21 @@
+#!/bin/sh
+set -e -x
+
+# set RTEMS to eg. "4.9" or "4.10"
+# requires qemu, bison, flex, texinfo, install-info
+if [ -n "$RTEMS" ]
+then
+  # find local qemu-system-i386
+  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
+  echo -n "Using QEMU: "
+  type qemu-system-i386 || echo "Missing qemu"
+  EXTRA=RTEMS_QEMU_FIXUPS=YES
+fi
+
+make -j2 $EXTRA
+
+if [ "$TEST" != "NO" ]
+then
+  make -j2 tapfiles
+  make -s test-results
+fi

modules/ca/.ci/travis-prepare.sh

@@ -0,0 +1,132 @@
+#!/bin/sh
+set -e -x
+
+CURDIR="$PWD"
+
+QDIR="$HOME/.cache/qemu"
+
+if [ -n "$RTEMS" -a "$TEST" = "YES" ]
+then
+  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
+  cd "$HOME/.build/qemu"
+
+  HEAD=`git log -n1 --pretty=format:%H`
+  echo "HEAD revision $HEAD"
+
+  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
+  echo "Cached revision $BUILT"
+
+  if [ "$HEAD" != "$BUILT" ]
+  then
+    echo "Building QEMU"
+    git submodule --quiet update --init
+
+    install -d "$HOME/.build/qemu/build"
+    cd         "$HOME/.build/qemu/build"
+
+    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
+    make -j2
+    make install
+
+    echo "$HEAD" > "$HOME/.cache/qemu/built"
+  fi
+fi
+
+cd "$CURDIR"
+
+cat << EOF > configure/RELEASE.local
+EPICS_BASE=$HOME/.source/epics-base
+EOF
+
+install -d "$HOME/.source"
+cd "$HOME/.source"
+
+add_base_module() {
+  MODULE=$1
+  BRANCH=$2
+  ( cd epics-base/modules && \
+  git clone --quiet --depth 5 --branch "$MODULE"/"$BRANCH" https://github.com/${REPOBASE:-epics-base}/epics-base.git "$MODULE" && \
+  cd "$MODULE" && git log -n1 )
+}
+
+git clone --quiet --depth 5 --branch core/"${BRCORE:-master}" https://github.com/${REPOBASE:-epics-base}/epics-base.git epics-base
+( cd epics-base && git log -n1 )
+add_base_module libcom "${BRLIBCOM:-master}"
+
+EPICS_HOST_ARCH=`sh epics-base/startup/EpicsHostArch`
+
+# requires wine and g++-mingw-w64-i686
+if [ "$WINE" = "32" ]
+then
+  echo "Cross mingw32"
+  sed -i -e '/CMPLR_PREFIX/d' epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
+  cat << EOF >> epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
+CMPLR_PREFIX=i686-w64-mingw32-
+EOF
+  cat << EOF >> epics-base/configure/CONFIG_SITE
+CROSS_COMPILER_TARGET_ARCHS+=win32-x86-mingw
+EOF
+fi
+
+if [ "$STATIC" = "YES" ]
+then
+  echo "Build static libraries/executables"
+  cat << EOF >> epics-base/configure/CONFIG_SITE
+SHARED_LIBRARIES=NO
+STATIC_BUILD=YES
+EOF
+fi
+
+case "$CMPLR" in
+clang)
+  echo "Host compiler is clang"
+  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.$EPICS_HOST_ARCH
+GNU         = NO
+CMPLR_CLASS = clang
+CC          = clang
+CCC         = clang++
+EOF
+
+  # hack
+  sed -i -e 's/CMPLR_CLASS = gcc/CMPLR_CLASS = clang/' epics-base/configure/CONFIG.gnuCommon
+
+  clang --version
+  ;;
+*)
+  echo "Host compiler is default"
+  gcc --version
+  ;;
+esac
+
+cat <<EOF >> epics-base/configure/CONFIG_SITE
+USR_CPPFLAGS += $USR_CPPFLAGS
+USR_CFLAGS += $USR_CFLAGS
+USR_CXXFLAGS += $USR_CXXFLAGS
+EOF
+
+# set RTEMS to eg. "4.9" or "4.10"
+# requires qemu, bison, flex, texinfo, install-info
+if [ -n "$RTEMS" ]
+then
+  echo "Cross RTEMS${RTEMS} for pc386"
+  install -d /home/travis/.cache
+  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
+  | tar -C /home/travis/.cache -xj
+
+  sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' epics-base/configure/os/CONFIG_SITE.Common.RTEMS
+  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.RTEMS
+RTEMS_VERSION=$RTEMS
+RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
+EOF
+  cat << EOF >> epics-base/configure/CONFIG_SITE
+CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
+EOF
+
+  # find local qemu-system-i386
+  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
+  echo -n "Using QEMU: "
+  type qemu-system-i386 || echo "Missing qemu"
+  EXTRA=RTEMS_QEMU_FIXUPS=YES
+fi
+
+make -j2 -C epics-base $EXTRA

modules/ca/.travis.yml

@@ -0,0 +1,26 @@
+sudo: false
+dist: trusty
+language: c
+compiler:
+  - gcc
+addons:
+  apt:
+    packages:
+    - libreadline6-dev
+    - libncurses5-dev
+    - perl
+    - clang
+    - g++-mingw-w64-i686
+install:
+ - ./.ci/travis-prepare.sh
+script:
+ - ./.ci/travis-build.sh
+env:
+ - BRCORE=master BRLIBCOM=master TEST=NO
+ - CMPLR=clang TEST=NO
+ - USR_CXXFLAGS=-std=c++11 TEST=NO
+ - CMPLR=clang USR_CXXFLAGS=-std=c++11 TEST=NO
+ - WINE=32 TEST=NO STATIC=YES
+ - WINE=32 TEST=NO STATIC=NO
+ - RTEMS=4.10 TEST=NO
+ - RTEMS=4.9 TEST=NO

modules/ca/Makefile

@@ -4,17 +4,14 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 
-TOP=../../../..
-
+TOP = .
 include $(TOP)/configure/CONFIG
 
-DIRS = build example 
-
-example_DEPEND_DIRS = build
-
-include $(TOP)/configure/RULES_DIRS
+DIRS += configure src
 
+src_DEPEND_DIRS = configure
 
+include $(TOP)/configure/RULES_TOP

modules/ca/configure/CONFIG

@@ -0,0 +1,28 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif

modules/ca/configure/CONFIG_CA_MODULE

@@ -0,0 +1,9 @@
+#*************************************************************************
+# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
+#     National Laboratory.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
+#*************************************************************************
+
+# Libraries needed to link a host tool
+EPICS_BASE_HOST_LIBS = ca Com

modules/ca/configure/CONFIG_CA_VERSION

@@ -0,0 +1,4 @@
+EPICS_CA_MAJOR_VERSION = 4
+EPICS_CA_MINOR_VERSION = 13
+EPICS_CA_MAINTENANCE_VERSION = 3
+EPICS_CA_DEVELOPMENT_FLAG = 0

modules/ca/configure/CONFIG_SITE

@@ -0,0 +1,42 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building even if conflicts are found.
+CHECK_RELEASE = YES
+
+# Set this when you only want to compile this application
+#   for a subset of the cross-compiled target architectures
+#   that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-ppc32
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+#INSTALL_LOCATION=</absolute/path/to/install/top>
+
+# Set this when the IOC and build host use different paths
+#   to the install location. This may be needed to boot from
+#   a Microsoft FTP server say, or on some NFS configurations.
+#IOCS_APPL_TOP = </IOC's/absolute/path/to/install/top>
+
+# For application debugging purposes, override the HOST_OPT and/
+#   or CROSS_OPT settings from base/configure/CONFIG_SITE
+#HOST_OPT = NO
+#CROSS_OPT = NO
+
+# These allow developers to override the CONFIG_SITE variable
+# settings without having to modify the configure/CONFIG_SITE
+# file itself.
+-include $(TOP)/../CONFIG_SITE.local
+-include $(TOP)/configure/CONFIG_SITE.local

modules/ca/configure/Makefile

@@ -0,0 +1,15 @@
+#*************************************************************************
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
+#*************************************************************************
+TOP = ..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+CFG += CONFIG_CA_MODULE
+CFG += CONFIG_CA_VERSION
+
+include $(TOP)/configure/RULES

modules/ca/configure/RELEASE

@@ -0,0 +1,39 @@
+# RELEASE - Location of external support modules
+#
+# IF YOU CHANGE ANY PATHS in this file or make API changes to
+# any modules it refers to, you should do a "make rebuild" in
+# this application's top level directory.
+#
+# The EPICS build process does not check dependencies against
+# any files from outside the application, so it is safest to
+# rebuild it completely if any modules it depends on change.
+#
+# Host- or target-specific settings can be given in files named
+#  RELEASE.$(EPICS_HOST_ARCH).Common
+#  RELEASE.Common.$(T_A)
+#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+#
+# This file is parsed by both GNUmake and an EPICS Perl script,
+# so it may ONLY contain definititions of paths to other support
+# modules, variable definitions that are used in module paths,
+# and include statements that pull in other RELEASE files.
+# Variables may be used before their values have been set.
+# Build variables that are NOT used in paths should be set in
+# the CONFIG_SITE file.
+
+# Variables and paths to dependent modules:
+#MODULES = /path/to/modules
+#MYMODULE = $(MODULES)/my-module
+
+# If building the EPICS modules individually, set these:
+#EPICS_LIBCOM = $(MODULES)/libcom-3.17.0
+#EPICS_BASE = $(MODULES)/core-7.0.1
+
+# Set RULES here if you want to use build rules from elsewhere:
+#RULES = $(MODULES)/build-rules
+
+# These lines allow developers to override these RELEASE settings
+# without having to modify this file directly.
+-include $(TOP)/../RELEASE.local
+-include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local
+-include $(TOP)/configure/RELEASE.local

modules/ca/configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

modules/ca/configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

modules/ca/configure/RULES_TOP

@@ -0,0 +1,2 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP

modules/ca/src/Makefile

@@ -0,0 +1,25 @@
+#*************************************************************************
+# Copyright (c) 2008 UChicago Argonne LLC, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
+#*************************************************************************
+
+TOP = ..
+include $(TOP)/configure/CONFIG
+
+# Channel Access Client
+
+DIRS += client
+
+DIRS += tools
+tools_DEPEND_DIRS = client
+
+DIRS += perl
+perl_DEPEND_DIRS = client
+
+DIRS += template
+
+include $(TOP)/configure/RULES_DIRS

modules/ca/src/client/CAref.html

@@ -3,7 +3,7 @@
 <html>
 <head>
   <meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-  <title>EPICS R3.15 Channel Access Reference Manual</title>
+  <title>EPICS Channel Access 4.13.1 Reference Manual</title>
   <style type="text/css">
   <!--
 h3 code {
@@ -18,7 +18,7 @@ h3 code {
 <body lang="en">
 <hr>
 
-<h1>EPICS R3.15 Channel Access Reference Manual</h1>
+<h1>EPICS Channel Access 4.13.1 Reference Manual</h1>
 <address>
   Jeffrey O. Hill
 </address>
@@ -45,12 +45,6 @@ GmbH.</span></p>
 distributed subject to a Software License Agreement found
 in the file LICENSE that is included with this distribution.</span></p>
 
-<p><a href="http://www.w3.org/Amaya/"><img
-src="http://www.w3.org/Amaya/Icons/w3c-amaya.gif" alt="W3C-Amaya" height="31"
-width="88"></a> <a href="http://validator.w3.org/check/referer"><img
-src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!" height="31"
-width="88"></a></p>
-
 <hr>
 
 <h2>Table of Contents</h2>
@@ -314,11 +308,21 @@ is used.</p>
       <td>i &gt;= 16384</td>
       <td>16384</td>
     </tr>
+    <tr>
+      <td>EPICS_CA_AUTO_ARRAY_BYTES</td>
+      <td>{YES, NO}</td>
+      <td>YES</td>
+    </tr>
     <tr>
       <td>EPICS_CA_MAX_SEARCH_PERIOD</td>
       <td>r &gt; 60 seconds</td>
       <td>300</td>
     </tr>
+    <tr>
+      <td>EPICS_CA_MCAST_TTL</td>
+      <td>r &gt; 1</td>
+      <td>1</td>
+    </tr>
     <tr>
       <td>EPICS_TS_MIN_WEST</td>
       <td>-720 &lt; i &lt;720 minutes</td>
@@ -746,6 +750,12 @@ in the variable EPICS_TS_MIN_WEST.</p>
 
 <h3><a name="Configurin1">Configuring the Maximum Array Size</a></h3>
 
+<p>From version R3.16.1, the default setting of EPICS_CA_AUTO_ARRAY_BYTES=YES
+will cause the software to ignore EPICS_CA_MAX_ARRAY_BYTES and attempt to
+allocate network buffer space as needed by the particular client connection
+using malloc. Setting EPICS_CA_AUTO_ARRAY_BYTES=NO will configure the software
+to respect the EPICS_CA_MAX_ARRAY_BYTES setting as described below instead.</p>
+
 <p>Starting with version R3.14 the environment variable
 EPICS_CA_MAX_ARRAY_BYTES determines the size of the largest array that may pass
 through CA. Prior to this version only arrays smaller than 16k bytes could be
@@ -768,11 +778,7 @@ array larger than EPICS_CA_MAX_ARRAY_BYTES it will return ECA_TOLARGE.</p>
 by multiplying the number of elements by the size of a single element, but
 neglect to add additional bytes for the compound data types (for example
 DBR_GR_DOUBLE) commonly used by the more sophisticated client side
-applications. <em>Based on this confusion, one could arrive at the conclusion
-that EPICS_CA_MAX_ARRAY_BYTES might have been better named
-EPICS_CA_MAX_DATUM_BYTES, or that the software should be changed internally to
-round the users request up by the size of the maximum scalar datum (nothing has
-been done to address this issue so far).</em></p>
+applications.</p>
 
 <h3><a name="Configurin2">Configuring a CA Server</a></h3>
 
@@ -3137,8 +3143,7 @@ indicating the current state of the channel.</p>
 <dl>
   <dt><code>COUNT</code></dt>
     <dd>The element count to be read from the specified channel. A count of
-      zero means use the current element count from the server, effectively
-      resulting in a variable size array subscription.</dd>
+      zero means use the current element count from the server.</dd>
 </dl>
 <dl>
   <dt><code>CHID</code></dt>

modules/ca/src/client/Makefile

@@ -4,10 +4,10 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 
-TOP=../../..
+TOP = ../..
 
 include $(TOP)/configure/CONFIG
 
@@ -24,6 +24,9 @@ INC += db_access.h
 INC += addrList.h
 INC += cacIO.h
 INC += caDiagnostics.h
+INC += net_convert.h
+INC += caVersion.h
+INC += caVersionNum.h
 
 LIBSRCS += cac.cpp
 LIBSRCS += cacChannel.cpp
@@ -69,7 +72,6 @@ LIBSRCS += comQueSend.cpp
 LIBSRCS += comBuf.cpp
 LIBSRCS += hostNameCache.cpp
 LIBSRCS += msgForMultiplyDefinedPV.cpp
-LIBSRCS_vxWorks += templateInstances.cpp
 
 LIBRARY=ca
 
@@ -80,7 +82,7 @@ ca_LIBS = Com
 ca_SYS_LIBS_WIN32 = ws2_32 advapi32 user32
 
 #   libs needed for PROD and TESTPRODUCT
-PROD_LIBS = ca Com 
+PROD_LIBS = ca Com
 # needed when its an object library build
 PROD_SYS_LIBS_WIN32 = ws2_32 advapi32 user32
 
@@ -107,7 +109,7 @@ EXPAND += S99caRepeater@
 EXPAND += caRepeater.service@
 EXPAND_VARS = INSTALL_BIN=$(abspath $(INSTALL_BIN))
 
-SRC_DIRS += $(TOP)/src/ca/client/test
+SRC_DIRS += $(TOP)/src/client/test
 PROD_HOST += ca_test
 ca_test_SRCS = ca_test_main.c ca_test.c
 ca_test_LIBS  = ca Com
@@ -115,4 +117,20 @@ ca_test_SYS_LIBS_WIN32 = ws2_32 advapi32 user32
 
 OBJS_vxWorks += ca_test
 
+EXPANDVARS += EPICS_CA_MAJOR_VERSION
+EXPANDVARS += EPICS_CA_MINOR_VERSION
+EXPANDVARS += EPICS_CA_MAINTENANCE_VERSION
+EXPANDVARS += EPICS_CA_DEVELOPMENT_FLAG
+
+EXPANDFLAGS += $(foreach var,$(EXPANDVARS),-D$(var)="$(strip $($(var)))")
+
+# shared library ABI version.
+SHRLIB_VERSION = $(EPICS_CA_MAJOR_VERSION).$(EPICS_CA_MINOR_VERSION).$(EPICS_CA_MAINTENANCE_VERSION)
+
 include $(TOP)/configure/RULES
+
+
+# Can't use EXPAND as generated headers must appear
+# in O.Common, but EXPAND emits rules for O.$(T_A)
+../O.Common/caVersionNum.h: ../caVersionNum.h@
+	$(EXPAND_TOOL) $(EXPANDFLAGS) $($@_EXPANDFLAGS) $< $@