Creating 3.14.12.4-rc1

Allows Windows and VxWorks to accept hex integers as a double.

LICENSE

@@ -1,11 +1,14 @@
-Copyright (c) 1991-2007 UChicago Argonne LLC and The Regents of the
-University of California. All rights reserved.
+Copyright (c) 1991-2011 UChicago Argonne LLC.
+Copyright (c) 1991-2006 The Regents of the University of California.
+Copyright (c) 2006-2011. Los Alamos National Security, LLC. Some of this
+material was produced under U.S. Government contract DE-AC52-06NA25396
+for Los Alamos National Laboratory (LANL), which is operated by Los Alamos
+National Security, LLC for the U.S. Department of Energy.
 
 EPICS BASE is distributed subject to the following license conditions:
 
  SOFTWARE LICENSE AGREEMENT
  Software: EPICS BASE
- Versions: 3.13.7 and higher
 
  1. The "Software", below, refers to EPICS BASE (in either source code, or
     binary form and accompanying documentation). Each licensee is

configure/CONFIG_ADDONS

@@ -1,5 +1,5 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
@@ -34,6 +34,7 @@
 #    LIBSRCS       source files for building libraries (deprecated)
 #    PROD_OBJS     object files for building prods
 #    LIB_OBJS      object files for building libraries
+#    USR_OBJS      object files for building libraries and prods
 #    USR_LIBS      libs needed by PROD and TESTPROD and LIBRARY
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY

configure/CONFIG_APP_INCLUDE

@@ -14,8 +14,8 @@ define  RELEASE_FLAGS_template
   SHRLIB_SEARCH_DIRS += $$($(1)_LIB)
   RELEASE_INCLUDES += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/include/os/$$(OS_CLASS)))
   RELEASE_INCLUDES += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/include))
-  RELEASE_DBDFLAGS += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/dbd))
-  RELEASE_DBFLAGS += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/db))
+  RELEASE_DBD_DIRS += $$(wildcard $$(strip $$($(1)))/dbd)
+  RELEASE_DB_DIRS += $$(wildcard $$(strip $$($(1)))/db)
   RELEASE_PERL_MODULE_DIRS += $$(wildcard $$($(1)_LIB)/perl)
 endef
 $(foreach top, $(RELEASE_TOPS), $(eval $(call RELEASE_FLAGS_template,$(top)) ))

configure/CONFIG_BASE

@@ -63,7 +63,8 @@ DBEXPAND                   = $(call PATH_FILTER, $(TOOLS)/dbExpand$(HOSTEXE))
 DBTORECORDTYPEH            = $(call PATH_FILTER, $(TOOLS)/dbToRecordtypeH$(HOSTEXE))
 DBTOMENUH                  = $(call PATH_FILTER, $(TOOLS)/dbToMenuH$(HOSTEXE))
 REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
-CONVERTRELEASE=$(PERL) $(TOOLS)/convertRelease.pl
+CONVERTRELEASE             = $(PERL) $(TOOLS)/convertRelease.pl
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
 
 #-------------------------------------------------------
 # tools for installing libraries and products

configure/CONFIG_BASE_VERSION

@@ -1,5 +1,5 @@
 #*************************************************************************
-# Copyright (c) 2010 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2012 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
@@ -19,26 +19,26 @@
 
 BASE_3_14=YES
 
-# EPICS_VERSION must be a number >0 and <256 
+# EPICS_VERSION must be a number >0 and <256
 EPICS_VERSION = 3
 
-# EPICS_REVISION must be a number >=0 and <256 
+# EPICS_REVISION must be a number >=0 and <256
 EPICS_REVISION = 14
 
-# EPICS_MODIFICATION must be a number >=0 and <256 
+# EPICS_MODIFICATION must be a number >=0 and <256
 EPICS_MODIFICATION = 12
 
 # EPICS_PATCH_LEVEL must be a number  (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 0
+EPICS_PATCH_LEVEL = 4
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
 #EPICS_DEV_SNAPSHOT=-pre1
 #EPICS_DEV_SNAPSHOT=-pre1-DEV
-EPICS_DEV_SNAPSHOT=-pre2
+#EPICS_DEV_SNAPSHOT=-pre2
 #EPICS_DEV_SNAPSHOT=-pre2-DEV
-#EPICS_DEV_SNAPSHOT=-rc1
+EPICS_DEV_SNAPSHOT=-rc1
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV

configure/CONFIG_COMMON

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
@@ -48,7 +47,7 @@ DB_OPT = NO
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
-CHECK_RELEASE_NO =
+CHECK_RELEASE_NO = noCheckRelease
 CHECK_RELEASE_WARN = warnRelease
 
 #-------------------------------------------------------
@@ -77,12 +76,16 @@ INSTALL_DB                  = $(INSTALL_LOCATION)/db
 INSTALL_CONFIG              = $(INSTALL_LOCATION)/configure
 INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
 
-#Directory for OS independant build created files
+# Directory for OS independant build created files
 COMMON_DIR = ../O.Common
 
+# IOC's absolute path to $(TOP), may be overridden inside the application
+IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
+
 #-------------------------------------------------------
 # Make echo output - suppress echoing if make's '-s' flag is set
-ECHO := $(if $(findstring s,$(MAKEFLAGS)),\#,@echo)
+NOP = :
+ECHO = @$(if $(findstring s,$(patsubst T_A=%,,$(MAKEFLAGS))),$(NOP),echo)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -258,6 +261,7 @@ LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
 COMMANDLINE_LIBRARY = EPICS
 OP_SYS_LDLIBS += $(LDLIBS_$(COMMANDLINE_LIBRARY))
 OP_SYS_LDFLAGS += $(LDFLAGS_$(COMMANDLINE_LIBRARY))
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
 
 #--------------------------------------------------
 # Flags
@@ -334,7 +338,7 @@ HDEPENDS_CFLAGS = $(HDEPENDS_CFLAGS_$(HDEPENDS))
 #--------------------------------------------------
 # depends definition
 
-TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY), $($(name)_SRCS))
+TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY) $(LOADABLE_LIBRARY), $($(name)_SRCS))
 SRC_FILES = $(LIB_SRCS) $(LIBSRCS) $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(TARGET_SRCS)
 HDEPENDS_FILES_YES = $(addsuffix $(DEP),$(notdir $(basename $(SRC_FILES))))
 HDEPENDS_FILES = $(if $(filter NO,$(HDEPENDS)),,$(HDEPENDS_FILES_YES))
@@ -370,6 +374,7 @@ INSTALL_LIB_INSTALLS = $(addprefix $(INSTALL_LIB)/,$(notdir $(LIB_INSTALLS)))
 # Installed file permissions
 BIN_PERMISSIONS = 555
 LIB_PERMISSIONS = 444
+SHRLIB_PERMISSIONS = 555
 INSTALL_PERMISSIONS = 444
 
 #---------------------------------------------------------------

configure/CONFIG_SITE

@@ -19,6 +19,7 @@
 #	aix-ppc                (IBM compiler used for host builds)
 #	aix-ppc-gnu            (GNU compiler used for host builds)
 #	cygwin-x86             (cygwin compiler used for host builds)
+#	cygwin-x86_64          (cygwin compiler used for host builds)
 #	darwin-ppc             (PowerPC based Apple running OSX)
 #	darwin-ppcx86          (Universal binaries for both CPUs)
 #	darwin-x86             (Intel based Apple running OSX)
@@ -41,6 +42,7 @@
 #	win32-x86-cygwin       (WIN32 API with cygwin GNU compiler used for host builds)
 #	win32-x86-mingw        (MinGW compiler used for host builds)
 #	windows-x64            (MS Visual C++ compiler used for host builds)
+#	windows-x64-mingw      (MinGW compiler used for host builds)
 
 #  Debugging builds 
 #	linux-x86-debug        (GNU compiler with -g option for host builds)
@@ -72,18 +74,22 @@
 #       linux-cris              (Axis GNU crosscompiler on linux-x86 host)
 #       linux-cris_v10          (Axis GNU crosscompiler on linux-x86 host)
 #       linux-cris_v32          (Axis GNU crosscompiler on linux-x86 host)
+#       linux-microblaze
 #       linux-xscale_be
 #       vxWorks-486
 #       vxWorks-68040
 #       vxWorks-68040lc
 #       vxWorks-68060
 #       vxWorks-pentium
+#       vxWorks-ppc32           (32-bit PowerPC CPUs with full FPU)
+#       vxWorks-ppc32sf         (32-bit PowerPC CPUs without FPU)
 #       vxWorks-ppc603
 #       vxWorks-ppc603_long
 #       vxWorks-ppc604
 #       vxWorks-ppc604_long
 #       vxWorks-ppc604_altivec
 #       vxWorks-mpc8540
+#       vxWorks-mpc8548
 #       RTEMS-at91rm9200ek
 #       RTEMS-beatnik
 #       RTEMS-gen68360
@@ -103,7 +109,7 @@
 # override 
 #
 CROSS_COMPILER_TARGET_ARCHS=
-#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
+#CROSS_COMPILER_TARGET_ARCHS=vxWorks-ppc32
 
 #  If only a subset of the host architectures perform
 #  the build for the CROSS_COMPILER_TARGET_ARCHS
@@ -116,9 +122,9 @@ CROSS_COMPILER_HOST_ARCHS=
 #     NOTE: os/CONFIG.$(EPICS_HOST_ARCH).$(EPICS_HOST_ARCH) files and
 #     os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(EPICS_HOST_ARCH) files may override
 #
-#     NOTE WIN32: YES results in a DLL.  Valid settings are
-#                   SHARED_LIBRARIES=YES and STATIC_BUILD=NO
-#                   SHARED_LIBRARIES=NO  and STATIC_BUILD=YES
+#     NOTE Windows: YES results in a DLL.  Valid settings are
+#        SHARED_LIBRARIES=YES  and  STATIC_BUILD=NO
+#        SHARED_LIBRARIES=NO   and  STATIC_BUILD=YES
 #
 SHARED_LIBRARIES=YES
 
@@ -180,7 +186,9 @@ EPICS_SITE_VERSION =
 # between the various stages of compilation.
 GCC_PIPE = NO
 
-#  Include RPATH when linking executables and libraries.
-#       must be either YES or NO
-LINKER_USE_RPATH=YES
+# Set RPATH when linking executables and libraries.
+#  Must be either YES or NO.  If you set this to NO you must also provide a
+#  way for Base executables to find their shared libraries when they are
+#  run at build-time, e.g. set the LD_LIBRARY_PATH environment variable.
+LINKER_USE_RPATH = YES
 

configure/RULES.Db

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #RULES.Db
@@ -22,11 +21,11 @@ vpath %.acs $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 
 ##################################################### dbdflags
 
-# dbExpand
-INSTALL_DBDFLAGS += -I $(INSTALL_LOCATION)/dbd
-INSTALL_DBFLAGS += -I $(INSTALL_LOCATION)/db
-DBDFLAGS = $(USR_DBDFLAGS) -I . -I .. $(INSTALL_DBDFLAGS) $(RELEASE_DBDFLAGS)
-DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) -I. -I.. $(INSTALL_DBFLAGS) $(RELEASE_DBFLAGS)
+DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
+DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
+
+DBDFLAGS = $(USR_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
+DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 
 #####################################################
 # To allow os specific dbd files AND have the -j option work properly,
@@ -48,7 +47,7 @@ DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) -I. -I.. $(INSTALL_DBFLAGS) $(RELEASE_DBF
 # Following line added for backward compatibilty
 DBD += $(DBDNAME)
 
-DBDINC_NAME = $(patsubst %.h,%,$(patsubst %.db,%,$(DBDINC)))
+DBDINC_NAME = $(patsubst %.h,%,$(patsubst %.dbd,%,$(DBDINC)))
 DBD += $(addsuffix .dbd,$(DBDINC_NAME))
 INC += $(addsuffix .h,$(DBDINC_NAME))
 
@@ -101,7 +100,7 @@ ACF_CPPFLAGS = $(ACF_CPPFLAGS_$(GNU))
 
 ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
                 $(SRC_INCLUDES) -I$(INSTALL_DB)
-ACFDEPENDS_CMD = -$(MKMF) -m $(notdir $@)$(DEP) $(subst -I,,$(ACF_INCLUDES)) $@ $<
+ACFDEPENDS_CMD = -$(MKMF) -m $(notdir $@)$(DEP) $(ACF_INCLUDES) $@ $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
 #####################################################  dependancies
@@ -109,19 +108,17 @@ ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
 
-DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) $(DBS) \
+DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
+                    $(patsubst $(COMMON_DIR)/%,%,$(COMMON_DBS)) \
                     $(patsubst $(COMMON_DIR)/%,%,$(COMMON_DBDS)))
 
-DBDDEPENDS_FLAGS = $(subst -I,,$(filter-out -S%,$(DBDFLAGS)))
+DBDDEPENDS_FLAGS = $(filter-out -S%,$(DBDFLAGS))
 DBDDEPENDS_CMD = -$(MKMF) -m $(notdir $@)$(DEP) $(DBDDEPENDS_FLAGS) $@ $<
 
-MAKEDBDEPENDS = $(PERL) $(TOOLS)/makeDbDepends.pl
-
 ##################################################### 
 
 ifndef T_A
 
-ECHO := $(if $(findstring s,$(MAKEFLAGS)),\#,@echo)
 COMMON_DIR = .
 INSTALL_DBDS =
 INSTALL_DBS =
@@ -223,58 +220,65 @@ $(INSTALL_DB)/%.template: %.template
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTORECORDTYPEH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%Record.h: %Record.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
+	echo "$@ : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTORECORDTYPEH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/menu%.h: $(COMMON_DIR)/menu%.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTOMENUH) $(DBDFLAGS) $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTOMENUH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/menu%.h: menu%.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTOMENUH) $(DBDFLAGS) $< $@
+	echo "$@ : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTOMENUH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
 ##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data 
-	@$(RM) $@
-	$(MAKEBPT) $< $@
+	$(MAKEBPT) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%.dbd: $(COMMON_DIR)/%Include.dbd 
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
 	$(ECHO) "Expanding dbd"
-	@$(RM) $@
-	@$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+	@$(RM) $(notdir $@)
+	@$(DBEXPAND) $(DBDFLAGS) -o $(notdir $@) $<
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%.dbd: %Include.dbd 
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
+	echo "$@ : ../Makefile" >> $(notdir $@)$(DEP)
 	$(ECHO) "Expanding dbd"
-	@$(RM) $@
-	$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+	@$(RM) $(notdir $@)
+	$(DBEXPAND) $(DBDFLAGS) -o $(notdir $@) $<
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%Include.dbd:
-	@$(RM) $@
-	$(PERL) $(TOOLS)/makeIncludeDbd.pl $($*_DBD) $@
+	@$(RM) $(notdir $@)
+	$(PERL) $(TOOLS)/makeIncludeDbd.pl $($*_DBD) $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(INSTALL_DBD)/%: $(COMMON_DIR)/%
 	$(ECHO) "Installing created dbd file $@"
@@ -302,8 +306,9 @@ $(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf
 
 $(COMMON_DIR)/%.db$(RAW): %.substitutions
 	@$(RM) $(notdir $@)$(DEP)
-	$(MAKEDBDEPENDS) $@ $< $(TEMPLATE_FILENAME) >> $(notdir $@)$(DEP)
-	$(ECHO) "$@:$(TEMPLATE_FILENAME)" >> $(notdir $@)$(DEP)
+	@$(MKMF) -m$(notdir $@)$(DEP) $(DBFLAGS) $@ $< $(TEMPLATE_FILENAME)
+	echo "$@ : $(TEMPLATE_FILENAME)" >> $(notdir $@)$(DEP)
+	echo "$(notdir $@)$(DEP): $(TEMPLATE_FILENAME)" >> $(notdir $@)$(DEP)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $@ $*.tmp
 	$(MSI) $(DBFLAGS) -S$< $(TEMPLATE_FILENAME) > $*.tmp
@@ -311,7 +316,7 @@ $(COMMON_DIR)/%.db$(RAW): %.substitutions
 
 $(COMMON_DIR)/%.db$(RAW): %.template
 	@$(RM) $(notdir $@)$(DEP)
-	@$(MAKEDBDEPENDS) $@ $^  >> $(notdir $@)$(DEP)
+	@$(MKMF) -m$(notdir $@)$(DEP) $(DBFLAGS) $@ $< $(TEMPLATE_FILENAME)
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $@ $*.tmp
 	$(MSI) $(DBFLAGS) $< > $*.tmp
@@ -363,17 +368,14 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 ##################################################### register record,device,driver support
 
-IOC_INST_TOP := $(firstword $(IOCS_APPL_TOP) \
-        $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LOCATION) ) )
-
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 %_registerRecordDeviceDriver.cpp: %.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp

configure/RULES.ioc

@@ -1,13 +1,13 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 #RULES.ioc
+
 include $(CONFIG)/RULES_DIRS
 
 build$(DIVIDER)$(ARCH) build: buildInstall
@@ -15,23 +15,18 @@ install$(DIVIDER)$(ARCH) install: buildInstall
 $(ARCH): buildInstall
 
 ifeq ($(filter $(ARCH),$(BUILD_ARCHS)),$(ARCH))
-buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
+    buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
 
-clean$(DIVIDER)$(ARCH) clean:
+    clean$(DIVIDER)$(ARCH) clean:
 	$(RM) cdCommands envPaths dllPath.bat
-
-else 
-buildInstall$(DIVIDER)$(ARCH) buildInstall:
-clean$(DIVIDER)$(ARCH) clean:
+else
+    buildInstall$(DIVIDER)$(ARCH) buildInstall:
+    clean$(DIVIDER)$(ARCH) clean:
 endif
 
 cdCommands envPaths dllPath.bat: $(wildcard $(TOP)/configure/RELEASE*) \
-	$(TOP)/configure/CONFIG $(INSTALL_BIN)
-ifeq ($(IOCS_APPL_TOP),)
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) $@
-else
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) -t $(IOCS_APPL_TOP) $@
-endif
+    $(wildcard $(TOP)/configure/CONFIG_SITE*) $(INSTALL_BIN)
+	$(CONVERTRELEASE) -a $(ARCH) -t $(IOCS_APPL_TOP) $@
 
 realclean:
 	$(RM) cdCommands envPaths dllPath.bat

configure/RULES_BUILD

@@ -22,6 +22,7 @@ vpath %.cpp $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.C $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.rc $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.h $(USR_VPATH) $(ALL_SRC_DIRS)
+vpath %.H $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.skel.static $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.y $(USR_VPATH) $(ALL_SRC_DIRS)
 vpath %.l $(USR_VPATH) $(ALL_SRC_DIRS)
@@ -167,6 +168,10 @@ checkRelease:
 	$(CONVERTRELEASE) checkRelease
 warnRelease:
 	-$(CONVERTRELEASE) checkRelease
+noCheckRelease:
+ifeq ($(EPICS_HOST_ARCH),$(T_A))
+	@echo "Warning: RELEASE file consistency checks have been disabled"
+endif
 
 #---------------------------------------------------------------
 #  The order of the following rules is
@@ -205,11 +210,6 @@ $(OBJLIBNAME):%$(OBJ):
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
 
-%$(OBJ): %.C
-	@$(HDEPENDS_CMD)
-	@$(RM) $@
-	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
-
 # WIN95/NT resource compiler
 %$(RES): %.rc
 	@$(RM) $@
@@ -322,10 +322,10 @@ $(OBJLIB_MUNCHNAME):%.munch : %_ctdt$(OBJ) %$(OBJ)
 	@$(RM) $@
 	$(MUNCH_CMD)
 
-runtests: $(TESTSCRIPTS_$(BUILD_CLASS))
+runtests: $(TESTSCRIPTS)
 	-$(PERL) -MTest::Harness -e 'runtests @ARGV if @ARGV;' $^
 
-testspec: $(TESTSCRIPTS_$(BUILD_CLASS))
+testspec: $(TESTSCRIPTS)
 	@$(RM) $@
 	@echo OS-class: $(OS_CLASS) > $@
 	@echo Target-arch: $(T_A) >> $@
@@ -383,11 +383,11 @@ $(INSTALL_LIB)/%.lib: %.lib
 
 $(INSTALL_SHRLIBS): $(INSTALL_SHRLIB)/%: %
 	$(ECHO) "Installing shared library $@"
-	@$(INSTALL_LIBRARY) -d -m $(LIB_PERMISSIONS) $< $(INSTALL_SHRLIB)
-ifneq ($(SHRLIB_SUFFIX),.dll)
+	@$(INSTALL_LIBRARY) -d -m $(SHRLIB_PERMISSIONS) $< $(INSTALL_SHRLIB)
+ifneq ($(SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE))
 ifneq (,$(strip $(SHRLIB_VERSION)))
-	@$(RM) $(subst .$(SHRLIB_VERSION),,$@)
-	ln -s $< $(subst .$(SHRLIB_VERSION),,$@)
+	@$(RM) $(subst $(SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE),$@)
+	ln -s $< $(subst $(SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE),$@)
 endif # SHRLIB_VERSION
 endif # SHRLIB_SUFFIX
 
@@ -408,10 +408,12 @@ $(INSTALL_TCLLIB)/$(TCLINDEX): $(INSTALL_TCLLIBS)
 $(INSTALL_LOADABLE_SHRLIBS): $(INSTALL_SHRLIB)/%: %
 	$(ECHO) "Installing loadable shared library $@"
 	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
+ifneq ($(LOADABLE_SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE))
 ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
-	@$(RM) $(subst .$(LOADABLE_SHRLIB_VERSION),,$@)
-	ln -s $< $(subst .$(LOADABLE_SHRLIB_VERSION),,$@)
+	@$(RM) $(subst $(LOADABLE_SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE),$@)
+	ln -s $< $(subst $(LOADABLE_SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE),$@)
 endif # LOADABLE_SHRLIB_VERSION
+endif # LOADABLE_SHRLIB_SUFFIX
 
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
@@ -463,7 +465,7 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all inc build install clean rebuild buildInstall
-.PHONY: runtests checkRelease warnRelease
+.PHONY: runtests checkRelease warnRelease noCheckRelease
 
 endif # BASE_RULES_BUILD
 #	EOF RULES_BUILD

configure/RULES_TOP

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
@@ -13,73 +12,73 @@
 
 include $(CONFIG)/RULES_DIRS
 
+distclean: realclean cvsclean realuninstall
+
+CVSCLEAN=$(firstword $(wildcard $(TOOLS)/cvsclean.pl $(TOP)/src/tools/cvsclean.pl))
+cvsclean:
+	$(PERL) $(CVSCLEAN)
+
+realuninstall: uninstallDirs
+	$(RMDIR) $(INSTALL_LOCATION_BIN)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)
+
 UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
         $(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
         $(INSTALL_DB)
 UNINSTALL_DIRS += $(DIRECTORY_TARGETS)
+uninstallDirs:
+	$(RMDIR) $(UNINSTALL_DIRS)
+
+uninstall: archuninstall uninstallDirs
+
+archuninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
+	@$(MAKE) -f Makefile cleandirs
 
-uninstallArchTargets = $(foreach arch,$(BUILD_ARCHS), uninstall$(DIVIDER)$(arch))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))
-
-$(uninstallArchTargets): uninstallDirs
-	@$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart) $(INSTALL_LOCATION_LIB)/$(archPart) 
+uninstall$(DIVIDER)%:
+	$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)/$(archPart)
 
 cleandirs:
 ifeq ($(wildcard $(INSTALL_LOCATION_BIN)/*),)
-	@$(RMDIR) $(INSTALL_LOCATION_BIN)
+	$(RMDIR) $(INSTALL_LOCATION_BIN)
 endif
 ifeq ($(wildcard $(INSTALL_LOCATION_LIB)/*),)
-	@$(RMDIR) $(INSTALL_LOCATION_LIB)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)
 endif
 	@echo
 # The echo above stops a "nothing to be done for cleandirs" message
 
-distclean: realclean realuninstall
-
-CVSCLEAN=$(firstword $(wildcard $(TOOLS)/cvsclean.pl $(TOP)/src/tools/cvsclean.pl))
-
-cvsclean:
-	@$(PERL) $(CVSCLEAN) 
-
-realuninstall:
-	@$(RMDIR) $(INSTALL_LOCATION_BIN) $(INSTALL_LOCATION_LIB)
-	@$(RMDIR) $(UNINSTALL_DIRS)
-
-uninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
-	@$(MAKE) -f Makefile  cleandirs
-
-uninstallDirs:
-	@$(RMDIR) $(UNINSTALL_DIRS)
-
 help:
 	@echo "Usage: gnumake [options] [target] ..."
 	@echo "Targets supported by all Makefiles:"
-	@echo "     install        - Builds and installs all targets (default rule)"
-	@echo "     all            - Same as install"
-	@echo "     buildInstall   - Same as install"
+	@echo "     all            - Same as install (default rule)"
+	@echo "     inc            - Installs header files"
+	@echo "     build          - Builds and installs all targets"
+	@echo "     install        - Builds and installs all targets"
+	@echo "     buildInstall   - Same as install (deprecated)"
 	@echo "     clean          - Removes the O.<arch> dirs created by running make"
 	@echo "                      In O.<arch> dir, clean removes build created files"
 	@echo "     realclean      - Removes ALL O.<arch> dirs"
 	@echo "                      Cannot be used within an O.<arch> dir"
 	@echo "     rebuild        - Same as clean install"
-	@echo "     inc            - Installs header files"
-	@echo "     build          - Builds all targets"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
 	@echo "\"Partial\" build targets supported by Makefiles:"
-	@echo "     inc.<arch>     - Installs <arch> only header files."
-	@echo "     install.<arch> - Builds and installs <arch> only."
-	@echo "     clean.<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "     build.<arch>   - Builds <arch> only."
+	@echo "     inc$(DIVIDER)<arch>     - Installs <arch> only header files."
+	@echo "     build$(DIVIDER)<arch>   - Builds and installs <arch> only."
+	@echo "     install$(DIVIDER)<arch> - Builds and installs <arch> only."
+	@echo "     clean$(DIVIDER)<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
+	@echo "     uninstall$(DIVIDER)<arch> - Remove bin & lib directories for <arch> only."
 	@echo "Targets supported by top level Makefile:"
-	@echo "     uninstall      - Cleans directories created by the install."
+	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
+	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
-	@echo "     distclean      - Same as realclean realuninstall."
+	@echo "     distclean      - Same as realclean cvsclean realuninstall."
 	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
 	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY : $(uninstallArchTargets)
-.PHONY : uninstall help cleandirs distclean uninstallDirs realuninstall
-.PHONY : cvsclean
+.PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
+.PHONY: uninstall help
 

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -1,17 +1,19 @@
 #
 # CONFIG.Common.RTEMS-beatnik
-# A migration from Eric Norum's CONFIG.Common.RTEMS-mvme5500
-# Author: Dayle Kotturi
-#         SLAC
-#         dayle@slac.stanford.edu
+# $Revision-Id$
+# Author: Dayle Kotturi <dayle@slac.stanford.edu>
 #
 # All RTEMS targets use the same Makefile fragment
 #
-override EXE=.elf
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
-GNU_TARGET=powerpc-rtems
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
+
+OP_SYS_LDLIBS += -lbspExt
 
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
@@ -19,16 +21,13 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
-CROSS_COMPILER_TARGET_ARCHS=RTEMS-beatnik
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS
+
 RTEMSSYMS=$(PRODNAME:%$(EXE)=%.sym)
 RTEMSIMGS=$(PRODNAME:%$(EXE)=%.bin)
 INSTALL_RTEMSSYMS=$(RTEMSSYMS:%=$(INSTALL_BIN)/%)
 INSTALL_RTEMSIMGS=$(RTEMSIMGS:%=$(INSTALL_BIN)/%)
 
-OP_SYS_LDLIBS += -lbspExt
-
 %.sym: %$(EXE)
 	$(XSYMS) $^ $@
 

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -1,15 +1,18 @@
 #
+# CONFIG.Common.RTEMS-mvme3100
 # $Revision-Id$
-# Author: W. Eric Norum
-#         Canadian Light Source
-#         eric@cls.usask.ca
+# Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment
 #
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG
 
+OP_SYS_LDLIBS += -lbspExt
+
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD
@@ -24,6 +27,4 @@ define MUNCH_CMD
 	rm -f rtems.gz
 endef
 
-OP_SYS_LDLIBS += -lbspExt
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -1,11 +1,19 @@
 #
+# CONFIG.Common.RTEMS-mvme3100
+# $Revision-Id$
+# Author: W. Eric Norum <wenorum@lbl.gov>
+#
 # All RTEMS targets use the same Makefile fragment
 #
-override EXE=.elf
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
-GNU_TARGET=powerpc-rtems
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
+
+OP_SYS_LDLIBS += -lbspExt
 
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
@@ -13,16 +21,13 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
-CROSS_COMPILER_TARGET_ARCHS=RTEMS-beatnik
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS
+
 RTEMSSYMS=$(PRODNAME:%$(EXE)=%.sym)
 RTEMSIMGS=$(PRODNAME:%$(EXE)=%.bin)
 INSTALL_RTEMSSYMS=$(RTEMSSYMS:%=$(INSTALL_BIN)/%)
 INSTALL_RTEMSIMGS=$(RTEMSIMGS:%=$(INSTALL_BIN)/%)
 
-OP_SYS_LDLIBS += -lbspExt
-
 %.sym: %$(EXE)
 	$(XSYMS) $^ $@
 

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -1,16 +1,21 @@
 #
+# CONFIG.Common.RTEMS-mvme5500
 # $Revision-Id$
-# Author: W. Eric Norum
-#         Advanced Photon Source
-#         norume@aps.anl.gov
+# Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment
 #
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
 ARCH_DEP_CFLAGS += -DBSP_NVRAM_BASE_ADDR=0xf1110000
 
+OP_SYS_LDLIBS += -lbspExt
+
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD

configure/os/CONFIG.Common.UnixCommon

@@ -19,8 +19,9 @@ OBJ = .o
 #Library prefix and suffixes
 LIB_PREFIX = lib
 LIB_SUFFIX = .a
-SHRLIB_SUFFIX = .so$(addprefix .,$(SHRLIB_VERSION))
-LOADABLE_SHRLIB_SUFFIX = .so$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
+SHRLIB_SUFFIX_BASE = .so
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(SHRLIB_VERSION))
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
 LOADABLE_SHRLIB_PREFIX = lib
 
 #-------------------------------------------------------
@@ -49,7 +50,7 @@ SHRLIB_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(LIB_LIBS) $(USR_LIBS))\
  $(LDLIBS)
 
 SHRLIB_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(SHRLIB_DEPLIBS))), \
-   $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+   $(shell $(FULLPATHNAME) $(word)))
 
 SHRLIBDIR_LDFLAGS += $(SHRLIB_DEPLIB_DIRS:%=-L%)
 
@@ -72,7 +73,7 @@ PROD_LDLIBS += $($(firstword $(LDLIBS_STATIC_$(STATIC_BUILD)) \
                $(LDLIBS_SHARED_$(SHARED_LIBRARIES))))
 
 PROD_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(PROD_DEPLIBS))), \
-  $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+  $(shell $(FULLPATHNAME) $(word)))
 
 PRODDIR_LDFLAGS += $(PROD_DEPLIB_DIRS:%=-L%)
 

configure/os/CONFIG.Common.cygwin-x86

@@ -14,7 +14,7 @@ OS_CLASS = cygwin32
 ARCH_CLASS = x86
 
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
-LDLIBS_READLINE = -lreadline -lcurses
+LDLIBS_READLINE = -lreadline
 
 POSIX_CPPFLAGS = -D_POSIX_THREADS -D_POSIX_TIMERS
 #POSIX_CPPFLAGS += -D_POSIX_SOURCE
@@ -48,11 +48,12 @@ STATIC_CXXFLAGS_NO=  $(VISC_DLL) -D_DLL
 #	But: if there are no objects LIBRARY_LD_OBJS to include
 #	in this library (may be for e.g. base/src/libCompat
 #	on some archs), don't define (and build) any library!
-SHRLIB_PREFIX=
-SHRLIB_SUFFIX=.dll
+SHRLIB_PREFIX =
+SHRLIB_SUFFIX_BASE = .dll
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
-LOADABLE_SHRLIB_PREFIX=
-LOADABLE_SHRLIB_SUFFIX=.dll
+LOADABLE_SHRLIB_PREFIX =
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=%$(LOADABLE_SHRLIB_SUFFIX))
 
 #

configure/os/CONFIG.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG.Common.cygwin-x86_64
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86_64
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64
+

configure/os/CONFIG.Common.ios-arm

@@ -1,17 +1,15 @@
 # CONFIG.Common.ios-arm
 #
+# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-arm target builds
+# Sites may override these definitions in CONFIG_SITE.Common.ios-arm
+# or CONFIG_SITE.<host>.ios-arm
 #-------------------------------------------------------
 
 IOS_PLATFORM = iPhoneOS
 
-#
-# Architecture-specific information
-#
-ARCH_CLASS = armv6
-
 OP_SYS_CFLAGS += -fno-inline-functions
 
 # iOS optimization flags for arm architecture

configure/os/CONFIG.Common.ios-x86

@@ -1,8 +1,11 @@
 # CONFIG.Common.ios-x86
 #
+# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-x86 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.ios-x86
+# or CONFIG_SITE.<host>.ios-x86
 #-------------------------------------------------------
 
 IOS_PLATFORM = iPhoneSimulator

configure/os/CONFIG.Common.iosCommon

@@ -3,7 +3,7 @@
 # $Revision-Id$
 # This file is maintained by the build community.
 #
-# Definitions for iOS target archs
+# Definitions for all Apple iOS builds
 # Sites may override these definitions in CONFIG_SITE.Common.iosCommon
 # or CONFIG_SITE.<host>.iosCommon
 #-------------------------------------------------------
@@ -29,16 +29,19 @@ SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM)$(IOS_VERSION).sdk
 
 #-------------------------------------------------------
 # Build architecture flags
-ARCH_DEP_CFLAGS += -arch $(ARCH_CLASS)
-ARCH_DEP_LDFLAGS += -arch $(ARCH_CLASS)
+#   ARCH_CLASS must contain a list of CPU architectures which must be
+#   valid arguments to the -arch options for the cc and ld commands.
+#   ARCH_CLASS is defined in a CONFIG_SITE file which is not loaded
+#   until after this file.
+#
+ARCH_DEP_FLAGS = $(addprefix -arch ,$(ARCH_CLASS))
+ARCH_DEP_CFLAGS += $(ARCH_DEP_FLAGS)
+ARCH_DEP_LDFLAGS += $(ARCH_DEP_FLAGS)
 
 #--------------------------------------------------
 # Operating system flags
 OP_SYS_CFLAGS += -isysroot $(SDK_DIR) -D__IPHONE_OS_VERSION_MIN_REQUIRED=30200
-
-#--------------------------------------------------
-# Don't try to use precompiled headers when converting sequencer files
-CPPSNCFLAGS += -no-cpp-precomp
+OP_SYS_LDFLAGS += -isysroot $(SDK_DIR)
 
 #--------------------------------------------------
 # Always compile in debugging symbol table information
@@ -48,23 +51,33 @@ OPT_CXXFLAGS_YES += -g
 
 #-------------------------------------------------------
 # Compiler definitions:
-#   Use clang instead of gcc
-#   Must use g++ still
-CC = $(GNU_BIN)/clang
-CCC = $(GNU_BIN)/c++
+
+CC_GNU  = gcc
+CCC_GNU = g++
+
+CC_LLVM_GNU  = llvm-gcc
+CCC_LLVM_GNU = llvm-g++
+
+CC_CLANG  = clang
+CCC_CLANG = clang++
+
+# Convert the iOS platform to lowercase for passing to xcrun's sdk parameter
+XCRUN_SDK_BASE = $(shell echo $(IOS_PLATFORM) | tr A-Z a-z)
 
 #-------------------------------------------------------
 # Linker flags
-OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib
+GNU_LDLIBS_YES =
+OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib -L$(SDK_DIR)/usr/lib/system
 
 #-------------------------------------------------------
 # Shared libraries
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell perl $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
-SHRLIB_SUFFIX = .$(SHRLIB_VERSION).dylib
+SHRLIB_SUFFIX_BASE = .dylib
+SHRLIB_SUFFIX = .$(SHRLIB_VERSION)$(SHRLIB_SUFFIX_BASE)
 
 LOADABLE_SHRLIB_LDFLAGS = -bundle -flat_namespace -undefined suppress
 
@@ -80,7 +93,17 @@ vpath %.m $(USR_VPATH) $(ALL_SRC_DIRS)
 %.o: %.m
 	$(COMPILE.c) -c $<
 
+#--------------------------------------------------
+# Header dependency file generation
+#
+HDEPENDS_METHOD = CMD
+
 #--------------------------------------------------
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.iosCommon
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).iosCommon
+
+#--------------------------------------------------
+# Find the Xcode compilers for the specified SDK just once
+CC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CC_$(COMPILER)))
+CCC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CCC_$(COMPILER)))

configure/os/CONFIG.Common.linux-arm

@@ -11,9 +11,6 @@ include $(CONFIG)/os/CONFIG.Common.linuxCommon
 
 ARCH_CLASS = arm
 
-# Set a special definition for network order of Netwinder ARM floating point
-ARCH_DEP_CPPFLAGS += -D_ARM_NWFP_
-
 ifeq ($(BUILD_CLASS),CROSS)
     VALID_BUILDS = Ioc
     GNU_TARGET = arm-linux
@@ -29,4 +26,11 @@ ifeq ($(BUILD_CLASS),CROSS)
     # Provide a link-time path for products
     PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
     PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+    # Provide a link-time path for readline 
+    RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
+    RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+    RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+    RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+
 endif

configure/os/CONFIG.Common.linux-microblaze

@@ -0,0 +1,21 @@
+# CONFIG.Common.linux-microblaze
+#
+# This file is maintained by the build community.
+#
+# Definitions for Xilinx MicroBlaze FPGA Soft Core Processor target builds.
+# This target has been tested with the Xilinx Spartan 6 MicroBlaze.
+
+# Site-specific overrides of these definitions should be made in the file
+#   CONFIG_SITE.Common.linux-microblaze
+#-------------------------------------------------------
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = microblaze
+
+ifeq ($(BUILD_CLASS),CROSS)
+	VALID_BUILDS = Ioc
+	GNU_TARGET = microblazeel-unknown-linux-gnu
+	CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
+endif

configure/os/CONFIG.Common.linux-xscale_be

@@ -5,7 +5,8 @@
 # Definitions for linux-xscale_be (big-endian) target builds.
 # This target has been tested with the MOXA UC-7408-LX Plus.
 
-# Sites may override these definitions in CONFIG_SITE.Common.linux-xscale_be
+# Site-specific overrides of these definitions should be made in the file
+#   CONFIG_SITE.Common.linux-xscale_be
 #-------------------------------------------------------
 
 # Include definitions common to all Linux targets
@@ -13,11 +14,6 @@ include $(CONFIG)/os/CONFIG.Common.linuxCommon
 
 ARCH_CLASS = xscale
 
-#
-# The vendor's tool chain needs to be located here
-#
-GNU_DIR=/usr/local/xscale_be
-
 ifeq ($(BUILD_CLASS),CROSS)
     VALID_BUILDS = Ioc
     GNU_TARGET = xscale_be

configure/os/CONFIG.Common.solaris-sparc

@@ -35,8 +35,6 @@ SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-R%)
 PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 
-RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
-
 GNU_TARGET=sparc-sun-solaris2
 
 STLPORT_CFLAGS_YES= -library=stlport4
@@ -53,17 +51,17 @@ OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 
 # OS libraries used when generating shared libraries or static binaries
 OP_SYS_LDLIBS += -lsocket -lnsl
-OP_SYS_LDLIBS_8 += -lCrun -lc
-OP_SYS_LDLIBS_9 += -lumem -lCrun -lc
+OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
+OP_SYS_LDLIBS_9 += -ldl -lumem -lCrun -lc
 OP_SYS_LDLIBS_10 += -lumem -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
 READLINE_DIR = $(GNU_DIR)
 INCLUDES_READLINE = -I$(READLINE_DIR)/include
-RUNTIME_LDFLAGS_READLINE += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE_YES += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE += $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
 LDFLAGS_READLINE += -L$(READLINE_DIR)/lib
 LDLIBS_READLINE = -lreadline -lcurses
 # Use archive if there is a problem with the readline shared library
 #LDLIBS_READLINE = -Bstatic -lreadline -Bdynamic -lcurses
-

configure/os/CONFIG.Common.solaris-sparc-gnu

@@ -15,7 +15,7 @@ COMPILER_CPPFLAGS =  -D_REENTRANT
 
 STLPORT_LDLIBS_NO =
 
-OP_SYS_LDLIBS_8 =
-OP_SYS_LDLIBS_9 =
+OP_SYS_LDLIBS_8 = -ldl
+OP_SYS_LDLIBS_9 = -ldl
 OP_SYS_LDLIBS_10 =
 

configure/os/CONFIG.Common.solaris-x86

@@ -36,8 +36,6 @@ SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-R%)
 PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 
-RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
-
 GNU_TARGET=x86-sun-solaris2
 
 STLPORT_CFLAGS_YES= -library=stlport4
@@ -52,8 +50,8 @@ OP_SYS_CFLAGS+=$(STLPORT_CFLAGS_$(USE_STLPORT))
 OP_SYS_LDFLAGS+=$(STLPORT_CFLAGS_$(USE_STLPORT))
 
 OP_SYS_LDLIBS += -lsocket -lnsl
-OP_SYS_LDLIBS_8 += -lCrun -lc
-OP_SYS_LDLIBS_9 += -lCrun -lc
+OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
+OP_SYS_LDLIBS_9 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_10 += -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
@@ -61,7 +59,8 @@ OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
 READLINE_DIR = $(GNU_DIR)
 INCLUDES_READLINE = -I$(READLINE_DIR)/include
-RUNTIME_LDFLAGS_READLINE += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE_YES += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE += $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
 LDFLAGS_READLINE += -L$(READLINE_DIR)/lib
 LDLIBS_READLINE = -lreadline -lcurses
 # Use archive if there is a problem with the readline shared library

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -14,7 +14,7 @@ COMPILER_CPPFLAGS = -D_REENTRANT
 
 STLPORT_LDLIBS_NO =
 
-OP_SYS_LDLIBS_8 = -lc
-OP_SYS_LDLIBS_9 = -lc
+OP_SYS_LDLIBS_8 = -ldl -lc
+OP_SYS_LDLIBS_9 = -ldl -lc
 OP_SYS_LDLIBS_10 = -lc
 

configure/os/CONFIG.Common.vxWorks-mpc8540

@@ -1,9 +1,10 @@
+# CONFIG.Common.vxWorks-mpc8540
+#
 # $Revision-Id$
+# This file is maintained by the build community.
 #
-# Definitions for vxWorks-mpc8540 targets: MPC8540 CPU with >32MB RAM.
-# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-mpc8540
-#
-# This file is maintained by the EPICS build community.
+# Definitions for vxWorks-mpc8540 target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8540
 #-------------------------------------------------------
 
 # Include definitions common to all vxWorks target archs

configure/os/CONFIG.Common.vxWorks-mpc8548

@@ -0,0 +1,26 @@
+# CONFIG.Common.vxWorks-mpc8548
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-mpc8548 target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks target archs
+include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+
+ARCH_CLASS = ppc
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=PPC32
+ARCH_DEP_CFLAGS = -DCPU_VARIANT=_ppc85XX_e500v2
+ARCH_DEP_CFLAGS += -mlongcall
+
+# This flag isn't present in early vxWorks 6.x versions
+#ARCH_DEP_CFLAGS += -te500v2
+
+GNU_TARGET = powerpc-wrs-vxworks

configure/os/CONFIG.Common.vxWorks-mpc8548-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-mpc8548-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-mpc8548-debug targets.
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-mpc8548
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorks-ppc32

@@ -0,0 +1,24 @@
+# $Revision-Id$
+#
+# Definitions for vxWorks-ppc603 targets with >32MB of RAM
+# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc603_long
+#
+# This file is maintained by the EPICS build community.
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks target archs
+include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+ARCH_CLASS = ppc
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=PPC32
+ARCH_DEP_CFLAGS = -mstrict-align
+
+GNU_TARGET = powerpc-wrs-vxworks
+
+# Tell compiler to generate long branches
+ARCH_DEP_CFLAGS += -mlongcall

configure/os/CONFIG.Common.vxWorks-ppc32-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-ppc32-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-ppc32-debug target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorks-ppc32sf

@@ -0,0 +1,13 @@
+# $Revision-Id$
+#
+# Definitions for vxWorks-ppc32sf targets
+# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc32sf
+#
+# This file is maintained by the EPICS build community.
+#-------------------------------------------------------
+
+# Inherit the settings from vxWorks-ppc32
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32
+
+# Tell compiler to use software floating-point
+ARCH_DEP_CFLAGS += -msoft-float

configure/os/CONFIG.Common.vxWorks-ppc32sf-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-ppc32sf-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-ppc32sf-debug target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32sf-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32sf
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorksCommon

@@ -93,6 +93,7 @@ VX_GNU_VERSION_6.5 = 3.4.4
 VX_GNU_VERSION_6.6 = 4.1.2
 VX_GNU_VERSION_6.7 = 4.1.2
 VX_GNU_VERSION_6.8 = 4.1.2
+VX_GNU_VERSION_6.9 = 4.3.3
 VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
@@ -134,6 +135,7 @@ NM_DIR_6.5 = $(WORKBENCH_BIN)
 NM_DIR_6.6 = $(WORKBENCH_BIN)
 NM_DIR_6.7 = $(GNU_BIN)
 NM_DIR_6.8 = $(UTILITIES_BIN)
+NM_DIR_6.9 = $(UTILITIES_BIN)
 NM_DIR = $(firstword $(NM_DIR_$(VXWORKS_VERSION)) $(GNU_BIN))
 
 NM = $(NM_DIR)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)$(HOSTEXE)
@@ -159,7 +161,7 @@ export TOOL_FAMILY = GNU
 
 #--------------------------------------------------
 # Operating system flags
-OP_SYS_CPPFLAGS += -DvxWorks
+OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
 # Fix for vxWorks 5 headers that use macros defined in vxWorks.h but

configure/os/CONFIG.Common.win32-x86-cygwin

@@ -55,11 +55,12 @@ STATIC_CXXFLAGS_NO=  $(VISC_DLL) -D_DLL
 #	But: if there are no objects LIBRARY_LD_OBJS to include
 #	in this library (may be for e.g. base/src/libCompat
 #	on some archs), don't define (and build) any library!
-SHRLIB_PREFIX=
-SHRLIB_SUFFIX=.dll
+SHRLIB_PREFIX =
+SHRLIB_SUFFIX_BASE = .dll
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
-LOADABLE_SHRLIB_PREFIX=
-LOADABLE_SHRLIB_SUFFIX=.dll
+LOADABLE_SHRLIB_PREFIX =
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=%$(LOADABLE_SHRLIB_SUFFIX))
 
 #

configure/os/CONFIG.Common.win32-x86-mingw

@@ -49,11 +49,12 @@ STATIC_CXXFLAGS_NO=  $(VISC_DLL) -D_DLL
 #	But: if there are no objects LIBRARY_LD_OBJS to include
 #	in this library (may be for e.g. base/src/libCompat
 #	on some archs), don't define (and build) any library!
-SHRLIB_PREFIX=
-SHRLIB_SUFFIX=.dll
+SHRLIB_PREFIX =
+SHRLIB_SUFFIX_BASE = .dll
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
-LOADABLE_SHRLIB_PREFIX=
-LOADABLE_SHRLIB_SUFFIX=.dll
+LOADABLE_SHRLIB_PREFIX =
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=%$(LOADABLE_SHRLIB_SUFFIX))
 
 #

configure/os/CONFIG.Common.windows-x64-mingw

@@ -0,0 +1,15 @@
+# CONFIG.Common.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target builds
+# Sites may override these definitions in CONFIG_SITE.Common.windows-x64-mingw
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
+
+ARCH_CLASS = x64
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64

configure/os/CONFIG.cygwin-x86.cygwin-x86-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.cygwin-x86.cygwin-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.cygwin-x86
-include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+-include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+-include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.cygwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.cygwin-x86.cygwin-x86
 
 BUILD_CLASS = HOST
 

configure/os/CONFIG.cygwin-x86_64.Common

@@ -0,0 +1,10 @@
+# CONFIG.cygwin-x86_64.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 host archs
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.cygwin-x86.Common

configure/os/CONFIG.cygwin-x86_64.cygwin-x86_64

@@ -0,0 +1,11 @@
+#  CONFIG.cygwin-x86_64.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Definitions for cygwin-x86_64 host - cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.cygwin-x86_64
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+

configure/os/CONFIG.darwin-ppc.darwin-ppc-debug

@@ -9,6 +9,8 @@
 
 -include $(CONFIG)/os/CONFIG.Common.darwin-ppc
 -include $(CONFIG)/os/CONFIG.darwin-ppc.darwin-ppc
+-include $(CONFIG)/os/CONFIG_SITE.Common.darwin-ppc
+-include $(CONFIG)/os/CONFIG_SITE.darwin-ppc.darwin-ppc
 
 BUILD_CLASS=HOST
 HOST_OPT = NO

configure/os/CONFIG.darwin-x86.darwin-x86-debug

@@ -9,6 +9,9 @@
 
 -include $(CONFIG)/os/CONFIG.Common.darwin-x86
 -include $(CONFIG)/os/CONFIG.darwin-x86.darwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.darwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.darwin-x86.darwin-x86
+
 
 BUILD_CLASS=HOST
 HOST_OPT = NO

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -36,11 +36,6 @@ ARCH_DEP_LDFLAGS += $(ARCH_DEP_FLAGS)
 #
 OP_SYS_CFLAGS += -fno-common
 
-#
-# Don't try to use precompiled headers when converting sequencer files
-#
-CPPSNCFLAGS += -no-cpp-precomp
-
 #
 # Darwin os definition
 #
@@ -52,20 +47,6 @@ OP_SYS_CPPFLAGS += -Ddarwin
 OPT_CFLAGS_YES += -g
 OPT_CXXFLAGS_YES += -g
 
-#
-# The following two definitions enable the use of DarwinPorts packages.
-#
-OP_SYS_INCLUDES += -I/opt/local/include
-# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
-OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /opt/local/lib/*))))
-
-#
-# The following two definitions enable the use of Fink packages.
-#
-OP_SYS_INCLUDES += -I/sw/include
-# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
-OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /sw/lib/*))))
-
 #
 # Libraries for command-line editing.
 #
@@ -78,18 +59,21 @@ COMMANDLINE_LIBRARY=READLINE
 
 GNU_DIR = /usr
 
-CC = $(GNU_BIN)/cc
-CCC = $(GNU_BIN)/c++
+# Apple soft-links these compilers to clang/clang++
+CC = cc
+CCC = c++
+GNU = NO
 
 #
 # Darwin shared libraries
 #
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell perl $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
-SHRLIB_SUFFIX = .$(SHRLIB_VERSION).dylib
+SHRLIB_SUFFIX_BASE = .dylib
+SHRLIB_SUFFIX = .$(SHRLIB_VERSION)$(SHRLIB_SUFFIX_BASE)
 
 LOADABLE_SHRLIB_LDFLAGS = -bundle -flat_namespace -undefined suppress
 

configure/os/CONFIG.linux-arm.Common

@@ -0,0 +1,10 @@
+# CONFIG.linux-arm.Common
+#
+# $Revision-Id$
+#
+# Definitions for linux-arm host builds
+# Sites may override these definitions in CONFIG_SITE.linux-arm.Common
+#-------------------------------------------------------
+
+#Include definitions common to unix hosts
+include $(CONFIG)/os/CONFIG.UnixCommon.Common

configure/os/CONFIG.linux-arm.linux-arm

@@ -0,0 +1,10 @@
+# CONFIG.linux-arm.linux-arm
+#
+# $Revision-Id$
+#
+# Definitions for native linux-arm builds
+# Sites may override these definitions in CONFIG_SITE.linux-arm.linux-arm
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/CONFIG.gnuCommon

configure/os/CONFIG.linux-x86.linux-x86-debug

@@ -7,8 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.linux-x86.linux-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+#-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86
+#-include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-x86
 
 BUILD_CLASS=HOST
 HOST_OPT=NO
-

configure/os/CONFIG.linux-x86_64.linux-x86_64-debug

@@ -7,8 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.linux-x86_64.linux-x86_64-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+-include $(CONFIG)/os/CONFIG.linux-x86_64.linux-x86_64
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86_64
+-include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.linux-x86_64
 
 BUILD_CLASS=HOST
-
 HOST_OPT = NO

configure/os/CONFIG.solaris-sparc.solaris-sparc-debug

@@ -7,7 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.solaris-sparc.solaris-sparc-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.solaris-sparc.solaris-sparc
+-include $(CONFIG)/os/CONFIG.solaris-sparc.solaris-sparc
+-include $(CONFIG)/os/CONFIG_SITE.Common.solaris-sparc
+-include $(CONFIG)/os/CONFIG_SITE.solaris-sparc.solaris-sparc
 
 BUILD_CLASS=HOST
 HOST_OPT=NO

configure/os/CONFIG.solaris-x86.solaris-x86-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.solaris-x86.solaris-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.solaris-x86
-include $(CONFIG)/os/CONFIG.solaris-x86.solaris-x86
+-include $(CONFIG)/os/CONFIG.Common.solaris-x86
+-include $(CONFIG)/os/CONFIG.solaris-x86.solaris-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.solaris-x86
+-include $(CONFIG)/os/CONFIG_SITE.solaris-x86.solaris-x86
 
 BUILD_CLASS=HOST
 

configure/os/CONFIG.win32-x86-borland.Common

@@ -8,10 +8,11 @@
 #-------------------------------------------------------
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+NOP = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86-borland.win32-x86-borland

@@ -176,7 +176,8 @@ LINK.shrlib+= $(DLL_DEF_FLAG),$(LIBRARY_LD_RESS)
 #	But: if there are no objects LIBRARY_LD_OBJS to include
 #	in this library (may be for e.g. base/src/libCompat
 #	on some archs), don't define (and build) any library!
-SHRLIB_SUFFIX=.dll
+SHRLIB_SUFFIX_BASE = .dll
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
 LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
 

configure/os/CONFIG.win32-x86-mingw.Common

@@ -11,10 +11,11 @@
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+NOP = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw

@@ -9,14 +9,15 @@
 # Include common gnu compiler definitions
 include $(CONFIG)/CONFIG.gnuCommon
 
-# gcc, g++, ar, ld, and ranlib must be in user's path
-CC = gcc
-CCC = g++
-AR = ar -rc
-LD = ld -r
-RANLIB = ranlib
-RES=.coff
-RCCMD = windres $(INCLUDES) $< $@
+CMPLR_PREFIX =
+
+CC  = $(CMPLR_PREFIX)gcc
+CCC = $(CMPLR_PREFIX)g++
+AR  = $(CMPLR_PREFIX)ar -rc
+LD  = $(CMPLR_PREFIX)ld -r
+RANLIB = $(CMPLR_PREFIX)ranlib
+RES = .coff
+RCCMD = $(CMPLR_PREFIX)windres $(INCLUDES) $< $@
 
 # No -fPIC avoids "-fPIC ignored for target (all code is position independent)"
 SHRLIB_CFLAGS =
@@ -26,7 +27,4 @@ LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 # Override linking with gcc library from CONFIG.gnuCommon
 GNU_LDLIBS_YES =
 
-OPT_CFLAGS_NO = -O3 -g
-OPT_CXXFLAGS_NO = -O3 -g
-
-OP_SYS_LDLIBS = -lws2_32 
+OP_SYS_LDLIBS = -lws2_32

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.win32-x86-mingw.win32-x86-mingw-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
-include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG_SITE.Common.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG_SITE.win32-x86-mingw.win32-x86-mingw
 
 BUILD_CLASS = HOST
 

configure/os/CONFIG.win32-x86.Common

@@ -8,10 +8,11 @@
 #-------------------------------------------------------
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+NOP = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86.win32-x86

@@ -31,7 +31,9 @@ BAFCMD = bscmake /nologo /o $@
 # Configure OS vendor C compiler
 CC = cl
 
+# Override CONFIG.gnuCommon for cross builds.
 GNU = NO
+HDEPENDS_METHOD = CMD
 
 #
 # /W<N> use warning level N
@@ -210,7 +212,8 @@ MUNCH_CMD =  $(CCC) /Fo $@ $^
 #	But: if there are no objects LIBRARY_LD_OBJS to include
 #	in this library (may be for e.g. base/src/libCompat
 #	on some archs), don't define (and build) any library!
-SHRLIB_SUFFIX=.dll
+SHRLIB_SUFFIX_BASE = .dll
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
 LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=%$(SHRLIB_SUFFIX))
 

configure/os/CONFIG.win32-x86.win32-x86-debug

@@ -7,10 +7,14 @@
 # Sites may override these definitions in CONFIG_SITE.win32-x86.win32-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.win32-x86-debug.win32-x86-debug
+-include $(CONFIG)/os/CONFIG.Common.win32-x86
+-include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.win32-x86
+-include $(CONFIG)/os/CONFIG_SITE.win32-x86.win32-x86
 
 GNU = NO
 
+HDEPENDS_METHOD = CMD
 BUILD_CLASS = HOST
 
 HOST_OPT = NO

configure/os/CONFIG.windows-x64-mingw.Common

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw host archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.Common
+

configure/os/CONFIG.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw

configure/os/CONFIG_SITE.Common.RTEMS

@@ -5,21 +5,22 @@
 
 # Where to find RTEMS
 #
-RTEMS_VERSION=4.9.2
-RTEMS_BASE=/usr/local/rtems/rtems-$(RTEMS_VERSION)
+RTEMS_VERSION = 4.10.2
+RTEMS_BASE = /usr/local/rtems/rtems-$(RTEMS_VERSION)
 
 # Cross-compile toolchain in $(RTEMS_TOOLS)/bin
 #
-RTEMS_TOOLS=$(RTEMS_BASE)
+RTEMS_TOOLS = $(RTEMS_BASE)
 
 
 # If you're using neither BOOTP/DHCP nor FLASH to pick up your IOC
-# network configuration you must uncomment and specify your Internet 
+# network configuration you must uncomment and specify your Internet
 # Domain Name here
 #
 #OP_SYS_CFLAGS += -DRTEMS_NETWORK_CONFIG_DNS_DOMAINNAME=<domainname>
 
-#
-# Specify your desired command-line-input library
+# Select the command-line-input library to use
 #
 COMMANDLINE_LIBRARY = EPICS
+#COMMANDLINE_LIBRARY = LIBTECLA
+#COMMANDLINE_LIBRARY = READLINE

configure/os/CONFIG_SITE.Common.cygwin-x86

@@ -7,4 +7,7 @@
 
 # If readline is installed uncomment the following line
 # to add command-line editing and history support
-COMMANDLINE_LIBRARY = READLINE
+#COMMANDLINE_LIBRARY = READLINE
+
+# Uncomment the following line if readline has problems
+#LDLIBS_READLINE= -lreadline -lcurses

configure/os/CONFIG_SITE.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG_SITE.Common.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Site Specific definitions for cygwin-x86_64 target
+# Only the local epics system manager should modify this file
+
+# If readline is installed uncomment the following line
+# to add command-line editing and history support
+#COMMANDLINE_LIBRARY = READLINE
+
+# Uncomment the following line if readline has problems
+#LDLIBS_READLINE = -lreadline -lcurses
+

configure/os/CONFIG_SITE.Common.darwin-x86

@@ -7,9 +7,31 @@
 #-------------------------------------------------------
 
 # Select which CPU architecture(s) to include in your MacOS binaries:
-#   i386
-#   x86_64  - Needs MacOS 10.4 with the Universal SDK, or 10.5 and later
+#   i386, x86_64, or both (fat binaries).
 
-ARCH_CLASS = i386
-#ARCH_CLASS = x86_64
+#ARCH_CLASS = i386
+ARCH_CLASS = x86_64
 #ARCH_CLASS = i386 x86_64
+
+#
+# Uncomment the following 3 lines to build with Apple's GCC instead of CLANG.
+#
+#CC  = gcc
+#CCC = g++
+#GNU = YES
+
+
+# To use MacPorts GCC uncomment (and modify if necessary) the following:
+
+#GNU_DIR = /opt/local
+#CC = $(GNU_BIN)/gcc -m64
+#CCC = $(GNU_BIN)/g++ -m64
+#GNU = YES
+
+# If you see this or similar errors while building in the src/cap5 directory
+#   gcc: error: unrecognized option '-no-cpp-precomp'
+# the problem is due to the ccflags configuration that your version of Perl
+# was built with.  You can replace the Cap5_CFLAGS setting in the Makefile
+# with a hand-edited set of flags for building that Perl library, or ignore
+# this problem if you don't need to use Channel Access from Perl.
+

configure/os/CONFIG_SITE.Common.ios-arm

@@ -0,0 +1,31 @@
+# CONFIG_SITE.Common.ios-arm
+#
+# $Revision-Id$
+#
+# Site-specific settings for ios-arm target builds
+#-------------------------------------------------------
+
+# Which ARM instruction set(s) to generate code for:
+#   Most iOS devices can run programs compiled for older
+#   instruction sets, although the newer instructions are
+#   more efficient.
+#
+#   Apple's compilers can build for multiple architectures,
+#   generating a Universal binary.  This is larger and takes
+#   longer to compile, but runs efficiently on all devices.
+#
+#   Xcode 4.5 dropped support for the ARMv6.
+#
+#   ARMv8 (arm64) devices: iPhone 5S
+#   ARMv7s devices: iPhone 5 and 5C, iPad Gen 4
+#   ARMv7 devices: iPhone 3GS, 4 and 4S, iPod Touch Gen 3 to 5
+#                  iPad Gen 1 to 3, iPad Mini, Apple TV Gen 2 and 3
+#   ARMv6 devices: iPhone 1 and 3G, iPod Touch Gen 1 and 2
+
+#ARCH_CLASS = arm64
+#ARCH_CLASS = armv7s arm64
+ARCH_CLASS = armv7 armv7s arm64
+#ARCH_CLASS = armv7 armv7s
+#ARCH_CLASS = armv7
+#ARCH_CLASS = armv6 armv7
+#ARCH_CLASS = armv6

configure/os/CONFIG_SITE.Common.iosCommon

@@ -1,7 +1,6 @@
 # CONFIG_SITE.Common.iosCommon
 #
 # $Revision-Id$
-# This file is maintained by the build community.
 #
 # Site-specific settings for Apple iOS builds
 #-------------------------------------------------------
@@ -9,16 +8,34 @@
 # iOS Version number
 
 #IOS_VERSION = 3.2
-IOS_VERSION = 4.1
+#IOS_VERSION = 4.1
+#IOS_VERSION = 4.2
+#IOS_VERSION = 4.3
+#IOS_VERSION = 5.0
+#IOS_VERSION = 5.1
+#IOS_VERSION = 6.0
+#IOS_VERSION = 6.1
+IOS_VERSION = 7.0
 
 
-# Most sites will want shared libraries
+# Which compiler to use:
+#   CLANG is required for Xcode 5.0 and later
+#   LLVM_GNU uses the llvm-gcc and llvm-g++ compilers
+#   GNU is needed for older versions of Xcode
 
-STATIC_BUILD=NO
-SHARED_LIBRARIES=YES
+COMPILER = CLANG
+#COMPILER = LLVM_GNU
+#COMPILER = GNU
 
 
-# Platform path, this is probably correct
+# Most sites will want to build shared libraries (which is the
+# default), but if you get an error from ld while building libCom,
+# try uncommenting this, which is needed for some compiler versions:
+
+#SHARED_LIBRARIES = NO
+
+
+# Get platform path from OS, these are usually correct:
 
 XCODE_PATH := $(shell xcode-select -print-path)
 PLATFORM_DIR = $(XCODE_PATH)/Platforms/$(IOS_PLATFORM).platform

configure/os/CONFIG_SITE.Common.linux-cris

@@ -1,5 +1,7 @@
 # CONFIG_SITE.Common.linux-cris
 #
+# $Revision-Id$
+#
 # Site Specific definitions for linux-cris target
 # Only the local epics system manager should modify this file
 
@@ -15,9 +17,21 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# If readline is not installed comment the following line
-# to omit command-line editing and history support
+# Depending on your version of Linux you may want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
+# No other libraries needed (recent Fedora, Ubuntu etc.):
 #COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+
 OP_SYS_CFLAGS += -g
 

configure/os/CONFIG_SITE.Common.linux-microblaze

@@ -0,0 +1,14 @@
+# CONFIG_SITE.Common.linux-microblaze
+#
+# Site specific definitions for linux-microblaze target builds.
+#-------------------------------------------------------
+
+# The gnu tools for cross compiling for MicroBlaze (little endian)
+# on Linux can be downloaded from the Xilinx git server:
+#   git clone git://git.xilinx.com/xldk/microblaze_v2.0_le.git
+#
+# The result contains a .tgz file with the tool-chain in it.
+# Set GNU_DIR to point to the un-tarred tool-chain:
+
+GNU_DIR = /usr/local/vw/microblaze-2.0/microblazeel-unknown-linux-gnu
+

configure/os/CONFIG_SITE.Common.linux-x86

@@ -18,12 +18,24 @@
 #    to inform the system of the shared library location.
 
 # Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history support.  If you're
+# lines to enable command-line editing and history in iocsh.  If you're
 # not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them
-# work, comment them all out.
-#COMMANDLINE_LIBRARY = READLINE
-COMMANDLINE_LIBRARY = READLINE_NCURSES
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-OP_SYS_CFLAGS += -g
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -18,12 +18,24 @@
 #    to inform the system of the shared library location.
 
 # Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history support.  If you're
+# lines to enable command-line editing and history in iocsh.  If you're
 # not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them
-# work, comment them all out.
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
 COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-OP_SYS_CFLAGS += -g
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-xscale_be

@@ -0,0 +1,9 @@
+# CONFIG_SITE.Common.linux-xscale_be
+#
+# Site specific definitions for linux-xscale_be target builds.
+#-------------------------------------------------------
+
+# Set GNU_DIR to point to directory containing the tool-chain
+
+GNU_DIR = /usr/local/xscale_be
+

configure/os/CONFIG_SITE.Common.vxWorks-mpc8548

@@ -0,0 +1,6 @@
+# $Revision-Id$
+#
+# Site Specific definitions for the vxWorks-mpc8548 target
+#
+# Only the local epics system manager should modify this file
+#-------------------------------------------------------

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -20,6 +20,7 @@ VXWORKS_VERSION = 5.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
+#VXWORKS_VERSION = 6.9
 
 
 # Sites may override the following path for a particular host
@@ -40,6 +41,7 @@ WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 #WORKBENCH_VERSION = 2.6
 #WORKBENCH_VERSION = 3.0
 #WORKBENCH_VERSION = 3.2
+#WORKBENCH_VERSION = 3.3
 
 
 # Utilities Version number, required from vxWorks 6.8 and later

configure/os/CONFIG_SITE.cygwin-x86.Common

@@ -6,5 +6,5 @@
 # Site override definitions for cygwin-x86 host builds
 #-------------------------------------------------------
  
-CROSS_COMPILER_TARGET_ARCHS =
+#CROSS_COMPILER_TARGET_ARCHS =
 

configure/os/CONFIG_SITE.darwinCommon.darwinCommon

@@ -0,0 +1,20 @@
+# CONFIG_SITE.darwinCommon.darwinCommon
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Site specific definitions for darwin builds
+#-------------------------------------------------------
+
+# Uncomment the following two definitions to enable the use of DarwinPorts packages.
+#
+#OP_SYS_INCLUDES += -I/opt/local/include
+# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
+#OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /opt/local/lib/*))))
+
+# Uncomment the following two definitions to enable the use of Fink packages.
+#
+#OP_SYS_INCLUDES += -I/sw/include
+# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
+#OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /sw/lib/*))))
+

configure/os/CONFIG_SITE.linux-arm.linux-arm

@@ -0,0 +1,7 @@
+#  CONFIG_SITE.linux-arm.linux-arm
+#
+# $Revision-Id$
+#
+# Site specific definitions for native linux-arm builds
+#-------------------------------------------------------
+

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -5,8 +5,10 @@
 # Site specific definitions for linux-x86 host - linux-arm target builds
 #-------------------------------------------------------
 
-# Diamond:
+# Tools install path
 #GNU_DIR = /home/targetOS/linux-arm/host/x86-linux/gcc_3.3.3
 
-# anj@aps:
-#GNU_DIR = /local/anj/cross-arm/gcc-3.4.5-glibc-2.3.6/arm-linux
+GNU_DIR = /net/phoebus/vw/zynq-2011.09
+
+# GNU crosscompiler target name
+GNU_TARGET = arm-xilinx-linux-gnueabi

configure/os/CONFIG_SITE.win32-x86-borland.Common

@@ -7,6 +7,5 @@
  
 # jba overrides
 #CROSS_COMPILER_TARGET_ARCHS=vxWorks-486
-#VX_DIR = T:/tornado20
 
 BORLAND = c:\\Borland\\Bcc55

configure/os/CONFIG_SITE.win32-x86.Common

@@ -8,5 +8,4 @@
 # jba test overrides
 #CROSS_COMPILER_TARGET_ARCHS=vxWorks-486
 #CROSS_COMPILER_TARGET_ARCHS+=vxWorks-68040
-#VX_DIR = T:/tornado20
 #INSTALL_LOCATION = G:/testInstall

configure/os/CONFIG_SITE.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,9 @@
+# CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+#
+# Site Specific definitions for windows-x64-mingw target
+# Only the local epics system manager should modify this file
+
+# Prefix for mingw compiler from cygwin
+#CMPLR_PREFIX = x86_64-w64-mingw32-

documentation/ConvertingR3.13AppsToR3.14.html

@@ -19,7 +19,7 @@ builds with release R3.14. It describes procedures such that:</p>
   <li>The application uses the configure rules which are new to R3.14.</li>
   <li>The OSI (Operating System Independent) features of R3.14 are available,
     i.e. iocCore products can be build for vxWorks as well as other
-    platforms, e.g. solaris and linux.</li>
+    platforms, e.g. Solaris and Linux.</li>
 </ul>
 
 <h3>Gnumake clean uninstall</h3>
@@ -47,10 +47,14 @@ find *App iocBoot -print | cpio -pvmd <i>/path/to/new/top</i></pre>
 
 <h3>Modify <i>top</i>/configure/RELEASE</h3>
 
-<p>Copy definitions of external modules excluding EPICS_BASE and
-TEMPLATES_TOP from old application RELEASE file. <br>
-If sequence programs (*.st or *.stt files) exist in your application, add the
-SNCSEQ location definition for the R3.14 sncseq external module</p>
+<p>Copy definitions of external modules excluding <tt>EPICS_BASE</tt> and
+<tt>TEMPLATE_TOP</tt> from your old application config/RELEASE file. In many
+cases the modules you actually use under R3.14 will be different to the R3.13
+modules, but the old module names here give you a starting-point for what there
+replacements will be.</p>
+
+<p>If any sequence programs (*.st or *.stt files) exist in your application, add
+the SNCSEQ location definition for the R3.14 sncseq external module.</p>
 
 <blockquote>
   <pre>SNCSEQ = <i>/path/to/sncseq</i></pre>
@@ -107,7 +111,7 @@ still to convert):</p>
   </blockquote>
 
 <p>This new Makefile  has comments explaining how to build the various host
-and ioc products. Lets consider some examples</p>
+and IOC products. Lets consider some examples</p>
 <ul>
   <li>Host programs
     <p>Makefile.Host contains definitions like:</p>
@@ -149,7 +153,7 @@ DBDNAME = exampleApp.dbd</pre>
     <p>NOTES: Change exampleApp.dbd to example.dbd in all st.cmd files. Also
     this definition assumes that file exampleInclude.dbd exists.</p>
   </li>
-  <li>Create the ioc application:
+  <li>Create the IOC application:
     <p>Makefile.Vx contains statements like:</p>
     <blockquote>
       <pre>SRCS.c += ../xxxRecord.c
@@ -172,7 +176,7 @@ exampleIoc_SRCS += devXxxSoft.c
 exampleIoc_LIBS += $(EPICS_BASE_IOC_LIBS)
 
 PROD_IOC_vxWorks = example
-example_SRCS += sncExample.stt
+example_SRCS += sncExample.st
 example_LIBS += exampleIoc
 example_LIBS += seq pv
 example_LIBS += $(EPICS_BASE_IOC_LIBS)
@@ -198,21 +202,22 @@ baseLIBOBJS, Makefile.Host, and Makefile.Vx</p>
   </blockquote>
 
 <p>to your <i>appname</i>Include.dbd file and remove the file
-<i>name</i>App/src/base.dbd from your src directory. The base.dbd from base/dbd
-will be used instead. If you only want to load a subset of the record
-definitions from base you can keep your own copy of base.dbd, but you should
-copy the one from your R3.14 base and edit that rather than trying to re-use the
-R3.13 version from your old application.</p>
+<i>name</i>App/src/base.dbd from your src directory. The base.dbd file from
+$(EPICS_BASE)/dbd will be used instead. If you only want to load a subset of the
+record definitions from base you can keep a local edited copy of the base.dbd
+file but you should copy it from $(EPICS_BASE)/dbd and edit that rather than
+trying to re-use the R3.13 version from your old application area.</p>
 
 <h3>Record support</h3>
 
-<p>Add the following line after all existing #includes</p>
+<p>Add the following header file inclusion after all other <tt>#include</tt>
+  statements:</p>
 
 <blockquote>
   <pre>#include "epicsExport.h"</pre>
   </blockquote>
 
-<p>The structure rset is now a typedef so change</p>
+<p>The <tt>struct rset</tt> is now available as a typedef so change</p>
 
 <blockquote>
   <pre>struct rset <i>recordname</i>RSET = { ... };</pre>
@@ -224,65 +229,68 @@ R3.13 version from your old application.</p>
   <pre>rset <i>recordname</i>RSET = { ... };</pre>
   </blockquote>
 
-<p>and add the following line after the <q>rset <i>recordname</i>RSET = { ...
-};</q> definition.</p>
+<p>and add the following line immediately after that definition:</p>
 
 <blockquote>
-  <pre>epicsExportAddress(rset,<i>recordname</i>RSET);</pre>
+  <pre>epicsExportAddress(rset, <i>recordname</i>RSET);</pre>
   </blockquote>
 
 <h3>Device support</h3>
 
-<p>Add the following line after all existing #includes</p>
+<p>Add the following header file inclusion after all other <tt>#include</tt>
+  statements:</p>
 
 <blockquote>
   <pre>#include "epicsExport.h"</pre>
   </blockquote>
 
-<p>and add the following line after the dset definition <q>struct { ... }
-dev<i>name</i> = { ... };</q></p>
+<p>and add the following line after every dset definition <tt>struct { ... }
+  dev<i>name</i> = { ... };</tt> in the file.</p>
 
 <blockquote>
-  <pre>epicsExportAddress(dset,dev<i>name</i>);</pre>
+  <pre>epicsExportAddress(dset, dev<i>name</i>);</pre>
   </blockquote>
 
 <h3>Driver support</h3>
 
-<p>Add the following line after all existing #includes</p>
+<p>Add the following header file inclusion after all other <tt>#include</tt>
+  statements:</p>
 
 <blockquote>
   <pre>#include "epicsExport.h"</pre>
   </blockquote>
 
-<p>and add the following line after the drvet drv<i>name</i> definition</p>
+<p>and add the following line after the <tt>drvet drv<i>name</i></tt>
+  definition:</p>
 
 <blockquote>
-  <pre>epicsExportAddress(drvet,drv<i>name</i>);</pre>
+  <pre>epicsExportAddress(drvet, drv<i>name</i>);</pre>
   </blockquote>
 
 <h3>Registration code changed</h3>
 
 <p>Registration code for application specific functions, e.g. subroutine record
-init and process functions, must been changed as follows</p>
+  init and process functions, must be changed as follows</p>
 
 <ol>
-  <li>Include the following header files after all existing #includes:
+  <li>Add the following header file inclusions after all other <tt>#include</tt>
+    statements:
     <blockquote>
       <pre>#include "registryFunction.h"
 #include "epicsExport.h"</pre>
       </blockquote></li>
 
-  <li>Make the application specific functions static functions, e.g.
+  <li>Mark the application specific functions as <tt>static</tt>, e.g.
     <blockquote>
       <pre>static long mySubInit(subRecord *precord)
 static long mySubProcess(subRecord *precord)</pre>
       </blockquote></li>
 
-  <li>Add an epicsExportFunction statement for each of the functions to be
-    registered, e.g.
+  <li>Add an <tt>epicsRegisterFunction</tt> statement for each of the functions
+    to be registered, e.g.
     <blockquote>
-      <pre>epicsExportFunction(mySubInit);
-epicsExportFunction(mySubProcess);</pre>
+      <pre>epicsRegisterFunction(mySubInit);
+epicsRegisterFunction(mySubProcess);</pre>
       </blockquote></li>
 
   <li>Add a function statement for each of the functions to be registered in a
@@ -293,6 +301,21 @@ function("mySubProcess")</pre>
       </blockquote></li>
 </ol>
 
+<h3>Additional Headers</h3>
+
+<p>It may be necessary to add one or more of the following header file
+  inclusions to any C source file if you get warnings or errors from the
+  compilation process. The most likely file missing is errlog.h.</p>
+
+<ul>
+  <li><tt>#include &lt;stdarg.h&gt;</tt></li>
+  <li><tt>#include "errlog.h"</tt></li>
+  <li><tt>#include "errMdef.h"</tt></li>
+  <li><tt>#include "ellLib.h"</tt></li>
+  <li><tt>#include "epicsTypes.h"</tt></li>
+</ul>
+
+
 <h3>Modify the Makefiles in <i>top</i>/iocBoot directory.</h3>
 
 <p>Change <q><tt>include $(TOP)/config/CONFIG_APP</tt></q> to <q><tt>include
@@ -351,14 +374,13 @@ $(TOP)/configure/RULES.ioc</tt></q></p>
 ld &lt; iocCore</pre>
   </blockquote>
 
-<p>Change <q><tt>ld &lt; <i>name</i>Lib</tt></q> to
+<p>The <tt>ld</tt> command in vxWorks 5.5.2 doesn't clean up its standard input
+stream properly, so we now recommend passing the filename to it as an argument
+instead. Change <q><tt>ld &lt; <i>name</i>Lib</tt></q> to
 
 <blockquote>
   <pre>ld 0,0, "<i>name</i>.munch"</pre>
-
-  <p>(The <tt>ld</tt> command in vxWorks 5.5.2 doesn't clean up its standard
-  input properly, so we now recommend passing the filename to it directly
-  instead.)</p> </blockquote>
+  </blockquote>
 
 <p>Change <q><tt>cd appbin</tt></q> to <q><tt>cd topbin</tt></q></p>
 
@@ -381,58 +403,42 @@ to
 
 <p>If any source file makes calls to recGbl routines make sure it includes
 <tt>recGbl.h</tt>. If it doesn't the compiler will issue warning messages and
-the ioc may issue the message: <q>undefined symbol: _recGblSetSevr</q>.</p>
+the IOC may not compile properly, or on vxWorks you could see the load-time
+error: <q>undefined symbol: _recGblSetSevr</q>.</p>
 
 <h3>Record support changes</h3>
 
-<p>The steppermotor, scan, and pid records are no longer in base.  If these
-records are not used in your application, comment out references to them in
-base.dbd. If these record types are used at your site, they should be
-downloaded and built with base R3.14 by your EPICS administrator. To update
-the R3.14 location of these record types in your application you must add
-appropriate module definitions to your application's config/RELEASE file and
-add <tt>LIBOBJS</tt> definitions to the src Makefile.</p>
+<p>The steppermotor, scan, and pid records are no longer in base. If these
+record types are used at your site, their unbundled modules should be downloaded
+from the EPICS website and built with base R3.14 by your EPICS administrator. To
+use these record types in your application you must add them to the application
+just like any other external support module.  Most modules provide instructions
+on how to use them in an IOC application.</p>
 
-<p>For example add</p>
-
-<blockquote>
-  <pre>PID = <i>/path/to/modules</i>/pid</pre>
-  </blockquote>
-
-<p>to config/RELEASE and add</p>
-
-<blockquote>
-  <pre>LIBOBJS += $(PID_BIN)/pidRecord.o</pre>
-  </blockquote>
-
-<p>to your application src/Makefile.</p>
-
-<p>You should consider changing any existing old steppermotor records to the
-new EPICS motor record module supported by Beamline Controls and Data
-Acquisition at APS.</p>
+<p>Consider changing any existing old steppermotor records to the EPICS motor
+record module supported by the Beamline Controls and Data Acquisition group at
+APS.</p>
 
 <h3>RecDynLink.o and devPtSoft changes</h3>
 
 <p>recDynLink.o and devPtSoft.o are no longer in EPICS base and now exist as
-separate EPICS modules.You must now add the appropriate module full path
-definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt> location definition <tt>$(EPICS_BASE_BIN)</tt> to the module
-definition bin directory in your application src directory files. See
-<q>Hardware support changes</q> below for instructions.</p>
+separate unbundled EPICS modules.  As with the three record types described
+above these must now be built separately and added as support modules to any
+applications that need them.</p>
 
 <h3>Hardware support changes</h3>
 
 <p>All hardware support (dev, drv and dbd files) except soft support has been
 unbundled from base R3.14. This support includes the files symb.dbd,
 drvHp1404a.o, drvEpvxiMsg.o, and drvEpvxi.o. If these are not used by your
-application, comment out references to them in base.dbd.</p>
+application, remove any references to them from your dbd files.</p>
 
-<p>Hardware support now exists as separate EPICS modules. The hardware
-support for your site should be downloaded and built with base R3.14 by your
-EPICS administrator. You must now add the appropriate module full path
-definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt> location from <tt>$(EPICS_BASE_BIN) </tt>to the module bin
-directory in your application src directory files.</p>
+<p>Hardware support now exists as separate EPICS modules. The hardware support
+modules used at your site should be downloaded and built with base R3.14 by your
+EPICS administrator. To use them, add the appropriate module full path
+definitions to your application configure/RELEASE file, and make the documented
+changes to your Makefile to link their binaries into the your IOC
+executable.</p>
 
 <p>For example, remove</p>
 
@@ -440,7 +446,7 @@ directory in your application src directory files.</p>
   <pre>LIBOBJS += $(EPICS_BASE_BIN)/symb</pre>
   </blockquote>
 
-<p>from baseLIBOBJS and add</p>
+<p>from <tt>baseLIBOBJS</tt> and add</p>
 
 <blockquote>
   <pre>LIBOBJS += $(SYMB_BIN)/symb</pre>
@@ -452,20 +458,25 @@ directory in your application src directory files.</p>
   <pre>SYMB = &lt;full path definition for the built module SYMB&gt;</pre>
   </blockquote>
 
-<p>into your application config/RELEASE file.</p>
+<p>into your application configure/RELEASE file.</p>
 
 <h3>dbLoadtemplate tool changes</h3>
 
-<p>The host tool dbLoadTemplate has been replace by a new EPICS extension,
+<p>The host tool dbLoadTemplate has been replace by a new EPICS extension called
 msi, which should be downloaded and built with base R3.14 by your EPICS
-administrator. dbLoadTemplate is still supported on iocs. If, in your
-application, db files are created from template and substitution files you
-should add the definition</p>
+administrator. dbLoadTemplate is still supported on IOCs. If the msi executable
+is not in your default search path and in your application db files are created
+from template and substitution files, you should add the definition</p>
 
 <blockquote>
   <pre>MSI = &lt;full path name to msi executable&gt;</pre>
   </blockquote>
 
-<p>to your application config/RELEASE file.</p>
+<p>to your application's configure/RELEASE file.</p>
+
+<h3>Optional <i>top</i>/configure/CONFIG_SITE changes</h3>
+
+<p>Review and optionally modify site build settings.</p>
+
 </body>
 </html>

documentation/KnownProblems.html

@@ -4,11 +4,21 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in R3.14.12</title>
+  <title>Known Problems in R3.14.12.1</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS Base R3.14.12: Known Problems</h1>
+<h1 style="text-align: center">EPICS Base R3.14.12.1: Known Problems</h1>
+
+<p>Any patch files linked below should be applied at the root of the
+base-3.14.12.1 tree. Download them, then use the GNU Patch program as
+follows:</p>
+
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.14.12.1</b>
+% <b>patch -p0 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
+
+<p>The following significant problems have been reported with this
+version of EPICS Base:</p>
 
 <ul>
 

documentation/RELEASE_NOTES.html

@@ -1,23 +1,725 @@
 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
+
     "http://www.w3.org/TR/html4/loose.dtd">
 <html>
 <head>
   <meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-  <title>EPICS Base R3.14.12 Release Notes</title>
+  <title>EPICS Base R3.14.12.4-rc1 Release Notes</title>
 </head>
 
 <body lang="en">
-<h1 align="center">EPICS Base Release 3.14.12</h1>
+<h1 align="center">EPICS Base Release 3.14.12.4-rc1</h1>
+
+<h2 align="center">Changes between 3.14.12.3 and 3.14.12.4</h2>
+
+<!-- Insert new items immediately below here ... -->
+
+<h3>Hex literal support in epicStrtod()</h3>
+
+<p>Some OS implementations of the standard C library routine strtod() do not
+recognize hexadecimal integers, in particular the libraries provided on Windows
+and VxWorks. The internal implementation of epicsStrtod() that these targets use
+now recognizes the 0x prefix and will convert hex numbers correctly. Thanks to
+Dirk Zimoch for suggesting this change.</p>
+
+<h3>Added support for 64-bit Cygwin and MinGW targets</h3>
+
+<p>Both windows-x64-mingw and cygwin-x86_64 build targets are now provided.</p>
+
+<h3>CAS: GDD Reference Count Underflow</h3>
+
+<p>Thanks to Bruce Hill a source of an underflow in a GDD reference count in the
+CAS code has been fixed.</p>
+
+<h3>Support for Apple Xcode 5.0</h3>
+
+<p>This adds the ability to build for iOS 7.0 and the ARMv8 64-bit CPU on the
+newest iPhone 5S device.</p>
+
+<h3>Reading TSEL field</h3>
+
+<p>The TSEL link field has two complementary uses; it is read to fetch a
+time-stamp event number for the TSE field, or if pointed to the .TIME field of
+another record the record's timestamp is copied directly from the target record.
+However with the latter usage if the TSEL link is itself read back instead of
+pointing to the .TIME field the link appears to have changed to point to the VAL
+field. This is due to an internal detail, and makes it impossible to save the
+TSEL field's value using autosave. This has been fixed, and now the TSEL field
+should always read back the same PV that it was pointed to.</p>
+
+<h3>dbLoadTemplate variable limits adjustable</h3>
+
+<p>The <tt>dbLoadTemplate</tt> command used to allocate a fixed amount of memory
+for the template macro values that it used to 5000 bytes, and also limited the
+number of variables that could defined to 100. These limits can now be changed
+at runtime using the variable <tt>dbTemplateMaxVars</tt> which sets the maximum
+number of macro variables that can be used; the amount of memory allocated for
+value storage is 50 times this number. This variable is registered as an iocsh
+variable in the base.dbd file, and can be adjusted as necessary before each
+individual call to <tt>dbLoadTemplate</tt>.</p>
+
+<p>The code now checks for and prevents any attempt to define more than the set
+number of variables, but it does not check for overruns of the storage buffer.
+This means that template files which define many long macro value strings could
+still cause a buffer overflow and crash the IOC at startup, but increasing the
+variable is all that is needed to allow that template file to be loaded.</p>
+
+<h3>Improvements to dbpf</h3>
+
+<p>It is now possible to use the <tt>dbpf</tt> command to put a long string
+value into a UCHAR array field, previously only CHAR arrays were supported by
+this command even though through Channel Access could put a long string to
+either type. The error message printed by <tt>dbpf</tt> when a value conversion
+fails has also been significantly improved.</p>
+
+<h3>Support for VxWorks 6.9</h3>
+
+<p>Various changes have been made that were needed to allow Base to build and
+run properly on VxWorks 6.9.</p>
+
+<h3>Improvements to aToIPAddr()</h3>
+
+<p>The libCom routine aToIPAddr() and the vxWorks implementation of the
+associated hostToIPAddr() function have been modified to be able to look up
+hostnames that begin with one or more digits. The epicsSockResolveTest program
+was added to check this functionality.</p>
+
+<h4>Added osdFindSymbol for Windows</h4>
+
+<p>Dirk Zimoch implemented the epicsLoadLibrary(), epicsLoadError() and
+epicsFindSymbol() routines for Windows OS targets.</p>
+
+<h4>More dbStatic commands accept "" or "*" to mean 'all'</h4>
+
+<p>The IOC commands dbDumpRecordType, dbDumpMenu and dbDumpRecord will now
+accept either an empty string or any string beginning with an asterisk '*' to
+mean all record types or menus.  Previously the 'all' option for these commands
+required passing in a NULL value, which could be done from the vxWorks shell but
+was not possible from iocsh.</p>
+
+<h4>VxWorks sysAtReboot Registration</h4>
+
+<p>The increasing intelligence of the GNU compiler and linker broke the method
+that was being used by the VxWorks code to register a reboot hook that can close
+down TCP connections nicely before the network stack gets disabled. This has
+been fixed and no longer uses a C++ static contructor to execute that code.</p>
+
+<h4>IOCS_APPL_TOP and INSTALL_LOCATION</h4>
+
+<p>An IOC application that sets INSTALL_LOCATION in its configure/CONFIG_SITE
+file no longer has to set IOCS_APPL_TOP there as well, unless the IOC uses a
+different path than the build host to reach the application's top directory in
+its filesystem. The IOCS_APPL_TOP variable now defaults to the value of
+INSTALL_LOCATION, so setting the latter automatically sets the former. This
+change fixes <a href="https://bugs.launchpad.net/bugs/1165257">Launchpad bug
+1165257</a>.</p>
+
+<h4>devLibVME.h</h4>
+
+<p>Moved the declaration of bcopyLongs() from this header into RTEMS/osdVME.h.
+Its original location broke the build for vxWorks 6.9 (the int nlongs argument
+becomes size_t in 6.9, thus conflicting with this declaration). The only local
+implementation of this routine is found in RTEMS/devLibVMEOSD.c, but it is not
+used anywhere in Base.</p>
+
+<h4>Allow empty database files</h4>
+
+<p>The IOC used to report an error if dbLoadRecords or dbLoadDatabase was asked
+to load an empty file or one containing just whitespace and/or comments. Such
+files are now permitted, simplifying the task of automated database generation
+programs which might discover they have nothing to output.</p>
+
+<h4>High-Resolution Time Provider on MacOS</h4>
+
+<p>MacOS does not provide the clock_gettime() API with CLOCK_REALTIME that other
+Posix systems implement, so we previously used gettimeofday() to fetch the
+current date & time from the OS. That older routine only provides the time with
+a resolution of 1 microsecond though, whereas clock_gettime() gives results with
+a nanosecond resolution.  This release uses a new MachTime time provider on
+MacOS which uses the Mach Kernel's CALENDAR_CLOCK service to fetch the time, and
+provides nanosecond resolution.</p>
+
+<h4>Time drift in periodic scans</h4>
+
+<p>The implementation of the periodic scan code has been modified to remove
+long-term drift associated with OS thread sheduling. The new code keeps scan
+times much more closely tied to the system clock tick, only allowing the scan
+period to drift if the record processing time takes longer to execute than the
+interval between scans. If this happens the scan thread is made to wait for an
+additional half-period but at most 1 second before the records are scanned
+again, to allow lower priority threads some time to process on a preemptive
+priority scheduled OS. After 10 repeated over-runs a warning will be logged,
+with an increasing delay between messages up to hourly.</p>
+
+<p>This fixes <a href="https://bugs.launchpad.net/bugs/597054">launchpad bug
+597054</a>.</p>
+
+<h2 align="center">Changes between 3.14.12.2 and 3.14.12.3</h2>
+
+<h4>Hex literals in CALC expressions</h4>
+
+<p>In previous releases, CALC expressions could contain hexadecimal literal
+integers on a target if the OS implementation of strtod() allows them (the
+vxWorks implementation does not). Now hex literal integers can be used in CALC
+expressions on all architectures. Hexadecimal floating point literals may have
+worked on some architectures in the past, but will no longer be accepted.</p>
+
+<h4>CAS: Added propertyEventMask support</h4>
+
+<p>Server tools should now be able to detect subscriptions to and send updates
+for DBE_PROPERTY events, using a casEventMask value returned by the new
+caServer::propertyEventMask() method.</p>
+
+<h4>caRepeater now built by default</h4>
+
+<p>Previously caRepeater was only built for host architectures, so builds for
+cross-compiled but workstation-type targets like linux-arm did not build it.
+Explicit exceptions prevent it being built on architectures like vxWorks, RTEMS
+and iOS which do not support normal executable programs.</p>
+
+<h4>Array Subroutine (aSub) record type fixes</h4>
+
+<ul>
+  <li>Changing the number of valid elements in a VALx field now triggers
+    monitors</li>
+  <li>The NEVx fields now post monitors, following the EFLG setting</li>
+  <li>The artificial limit of 10,000,000 array elements has been removed</li>
+</ul>
+
+<h4>Problem with NAN values in MLST/ALST fields</h4>
+
+<p>The ai, ao, calc, calcout, dfanout, sel and sub record types could stop
+posting monitors if they got NAN values in their MLST or ALST fields. A change
+has been included so this should no longer be the case.</p>
+
+<h4>MacOS build defaults changed</h4>
+
+<p>The default build settings for darwin-x86 targets have been changed to match
+the latest version of XCode; see configure/os/CONFIG_SITE.Common.darwin-x86
+if you need to revert back to building with GCC or to include the i386 CPU
+architecture.</p>
+
+<h4>Build problem with db dependencies</h4>
+
+<p>The dependency output for .db and .acf files created by makeDbDepends.pl did
+not show the directories of the depended files. The makeDbDepends.pl script has
+been replaced by mkmf.pl for this purpose after modifying it to accept multiple
+-I include directory options and more than one source file on the command line.
+The makeDbDepends.pl script has been removed from Base.</p>
+
+<h4>Native linux-arm builds added</h4>
+
+<p>The configuration files needed for a linux-arm system to build Base for
+itself have now been added. Both the Shell and Perl versions of the startup
+EpicsHostArch scripts now recognize both arm6l and arm7l CPUs and return the
+generic linux-arm host architecture name for them.</p>
+
+<h4>New Microblaze Target Architecture</h4>
+
+<p>A new cross-compiled target architecture is included for the Xilinx
+Microblaze FPGA soft-core CPU architecture running Linux.</p>
+
+<h4>Win32 Numeric string to enum/menu/device conversions</h4>
+
+<p>Microsoft's C run-time library has a bug in the sscanf() function such that
+the "%n" format specifier does not always work. The string to enum, menu and
+device conversion functions have been modified to avoid this problem, but a
+numeric string will no longer be converted properly on any architecture if it
+has trailing whitespace characters.</p>
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>1090009
+  <a href="https://bugs.launchpad.net/bugs/1090009">
+    osdSufficentSpaceInPoolQuery fails on vxWorks 2 GB system</a></li>
+<li>999167
+  <a href="https://launchpad.net/bugs/999167">
+    Missing epicsShareFunc for casStatsFetch</a></li>
+<li>950555
+  <a href="https://launchpad.net/bugs/950555">
+    String substitution removes part of path when linking versioned shared
+    libraries</a></li>
+<li>907761
+  <a href="https://launchpad.net/bugs/907761">
+    reading only 1st char of link in "long string" ($) syntax fails in read
+    error</a></li>
+<li>903448
+  <a href="https://launchpad.net/bugs/903448">
+    RHEL5 nss ldap update cause stack size related failure</a>
+  <p>
+    This bug fix changed the stack sizes for both Posix and Windows targets as
+    follows:</p>
+  <table>
+    <tr><th>epicsThreadStackSizeClass</th><th>New Stack Size</th></tr>
+    <tr><td>epicsThreadStackSmall</td>
+      <td>0x10000 &times; sizeof (void *)</td></tr>
+    <tr><td>epicsThreadStackMedium</td>
+      <td>0x20000 &times; sizeof (void *)</td></tr>
+    <tr><td>epicsThreadStackBig</td>
+      <td>0x40000 &times; sizeof (void *)</td></tr>
+  </table></li>
+
+</ul>
+
+<h4>Calcout and Seq record timestamps</h4>
+
+<p>Both the calcout and seq record types were not updating the record's
+timestamp before calling db_post_events() for some field updates.  The calcout
+record type will now update the record's timestamp before it posts a channel
+access monitor on the DLYA field; this happens twice during record processing if
+the ODLY field is larger than 0.</p>
+
+<p>Timestamps from all seq record monitor events have been wrong since 1995 or
+earlier, the time being provided was from the last time the record processed. 
+Now the record timestamp will be updated between reading each DOL1..DOLA link
+and posting the monitor on the associated DO1..DOA field.  The VAL field is
+never given a value by the record processing code, but is used for posting
+monitors when the alarm status or severity gets updated at the end of record
+processing.  Alarm monitors are now timestamped properly at that time.</p>
+
+<h4>Comments in iocsh scripts</h4>
+
+<p>The IOC shell was very particular about comments in previous versions of
+Base. If the <tt>#</tt> character was indented using white-space characters it
+had to be followed immediately by a white-space, comma or parenthesis character,
+and macLib would report errors if the rest of the comment contained any
+undefined macros. These restrictions have now been removed. The comment
+character can come from expanding a macro without it having to be followed by
+white-space, although in this case macLib will still report errors due to
+undefined or circular macro definitions.</p>
+
+<h4>MacOS-X: Don't use Ports/Fink unless configured</h4>
+
+<p>Previous releases would automatically use headers and link to libraries found
+in the DarwinPorts and Fink installation directories. This is now controlled by
+entries in the <tt>CONFIG_SITE.darwinCommon.darwinCommon</tt> file in the
+<tt>configure/os</tt> directory, which are commented out by default. Recent
+versions of MacOS-X come with an implementation of readline, so those additional
+code repositories are no longer required.</p>
+
+<h2 align="center">Changes between 3.14.12.1 and 3.14.12.2</h2>
+
+<h4>Path for Cap5 loadable library changed</h4>
+
+<p>The perl CA module makes use of a loadable library, which used to be loaded
+from the base/lib/&lt;host-arch&gt; directory.  However different versions of
+Perl require different loadable library binaries as the Perl ABI can change.
+Now the library will be installed into and loaded from the directory
+base/lib/perl/&lt;version&gt;/&lt;archname&gt; where both &lt;version&gt; and
+&lt;archname&gt; are taken from the Perl configuration.  This makes it possible
+for the same Perl script to be run on both RHEL5 and RHEL6 workstations say, even
+though they use different versions of Perl.</p>
+
+<p>To achieve that, first build EPICS Base using the older OS version.  Then
+on a machine running the newer version, go into the base/src/cap5 directory and
+run a <tt>make rebuild</tt> command.  This will rebuild the libCap5.so file and
+install it into the location appropriate for its Perl version and architecture.</p>
+
+<h4>Build configurations updated for Apple iOS targets</h4>
+
+<p>The build process can now construct universal binaries containing both ARMv6
+and ARMv7 code, and several defaults have been changed when building for iOS
+targets:</p>
+
+<ul>
+
+<li>The default value for IOS_VERSION is now 5.0, edit the setting in
+<tt>configure/os/CONFIG_SITE.Common.iosCommon</tt> to use an older version.</li>
+
+<li>With the introduction of iOS 5.0 we have switched the C++ compiler for
+ios-arm from GNU g++ to using the LLVM-based clang++ (the GNU compilers are
+apparetnly no longer included with the SDK).  This can be switched back by
+editing the new <tt>CONFIG_SITE.Common.ios-arm</tt> file.</li>
+
+<li>Like the Darwin builds, universal binaries can now be compiled for the
+ios-arm target, containing either or both ARMv6 and ARMv7 instructions. This is
+configured by setting ARCH_CLASS in the new <tt>CONFIG_SITE.Common.ios-arm</tt>
+file. The default is now to build for ARMv7 only, which is not compatible with
+the original iPhone 1 or 3G, or with the iPod Touch Generations 1 or 2.</li>
+
+</ul>
+
+<h4>Added <tt>-b</tt> option to dbExpand</h4>
+
+<p>This turns off monotonic checking of breakpoint tables.</p>
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>697509
+  <a href="https://launchpad.net/bugs/697509">
+    Thread synchronization issue in libCom/osi/os/WIN32/osdTime.cpp</a></li>
+<li>697516
+  <a href="https://launchpad.net/bugs/697516">
+    Crash occurs in Com.dll if filetime is before the EPICS epoch </a></li>
+<li>697517
+  <a href="https://launchpad.net/bugs/697517">
+    WIN32 osdtime should handle the system time change properly</a></li>
+<li>697519
+  <a href="https://launchpad.net/bugs/697519">
+    The incorrect way to compute the roll-over in WIN32 osdTime.cpp</a></li>
+<li>736273
+  <a href="https://launchpad.net/bugs/736273">
+    nonstandard c++ mutable ref in cac</a></li>
+<li>786979
+  <a href="https://launchpad.net/bugs/786979">
+    incorrect ref counting for timer queues</a></li>
+<li>794749
+  <a href="https://launchpad.net/bugs/794749">
+    3.14.12 caget without -c always requests maximum element count</a></li>
+<li>816678
+  <a href="https://launchpad.net/bugs/816678">
+    g++ generic thunk generation fails virtual varargs</a></li>
+<li>831648
+  <a href="https://launchpad.net/bugs/831648">
+    RTEMS dynamically loaded app fails to execute osdTimeRegister</a></li>
+<li>835138
+  <a href="https://launchpad.net/bugs/835138">
+    Incorrect calculation oss priorities for posix threads</a></li>
+<li>861214
+  <a href="https://launchpad.net/bugs/861214">
+    epicsThreadOnce crashes in static object destructor on win32</a></li>
+<li>861627
+  <a href="https://launchpad.net/bugs/861627">
+    RULES.db has incorrect dbExpand flags</a></li>
+<li>878372
+  <a href="https://launchpad.net/bugs/878372">
+    in-memory channel, ca client subscribe isnt thread safe</a></li>
+<li>878387
+  <a href="https://launchpad.net/bugs/878387">
+    In memory channel clear fails from put callback function</a></li>
+</ul>
+
+<h4>Added database sanity checks to iocInit</h4>
+
+<p>Two menus may legitimately be modified by users; some checks have been added
+that run at iocInit and make sure the choices haven't been changed too much for
+the IOC to function properly:</p>
+
+<ul>
+<li><tt>menuConvert</tt> is checked to flag problems with IOCs converted from
+  3.13.x, where the SLOPE choice didn't exist.</p>
+<li><tt>menuScan</tt> is checked to ensure the three initial choices are still
+  present and that there is at least one periodic scan rate.</li>
+</ul>
+
+<h4>Fix various catools issues</h4>
+
+<p>Array handling in the caget and camonitor programs has been debugged, fixing
+<a href="https://bugs.launchpad.net/bugs/794749">launchpad bug 794749</a> along
+with a few other related issues dating back to the addition of variable length
+array support.</p>
+
+<h4>Another race condition in errlog cleaned up</h4>
+
+<p>If it was still busy when the IOC was closed down, the errlog thread could
+have preempted the exit handler and freed the various internal pvtData mutex and
+event objects too soon.</p>
+
+<h4>Top-level make target changes</h4>
+
+<p>Several make targets have been changed. Note that these can only be used from
+an application's &lt;top&gt; directory.</p>
+
+<dl>
+  <dt><code>make uninstall.&lt;arch&gt;</code></dt>
+  <dd>Deletes the bin/&lt;arch&gt; and lib/&lt;arch&gt; directories for
+    &lt;arch&gt; only. Note that &lt;arch&gt; does not have to be an
+    architecture that this host is configured to build, it works for any
+    arch.</dd>
+
+  <dt><code>make archuninstall</code></dt>
+  <dd>Deletes the bin/&lt;arch&gt; and lib/&lt;arch&gt; directories for all
+    architectures that this host is configured to build. Should not affect files
+    used for multiple architectures, or for host or target architectures that
+    this host is not configured to build.</dd>
+
+  <dt><code>make uninstall</code></dt>
+  <dd>Does archuninstall and also deletes the other install directories include,
+    db, dbd, doc, html, templates and java. This will affect subsequent builds
+    for other architectures, but it doesn't delete their bin/&lt;arch&gt; or
+    lib/&lt;arch&gt; contents.</dd>
+
+  <dt><code>make realuninstall</code></dt>
+  <dd>Deletes all install directories for all architectures.</dd>
+
+  <dt><code>make distclean</code></dt>
+  <dd>Does realclean realuninstall as before, and also now does a cvsclean,
+    which removes file remnants from CVS operations named <code>.#*</code> and
+    editor backups named <code>*~</code> throughout the source tree.</dd>
+
+</dl>
+
+<h4>Compress record type</h4>
+
+<p>This record now posts monitors on its NUSE field whenever its value changes.
+A new field OUSE was added to support this.</p>
+
+<h4>Remove C++ build rule for <code>.C</code> files</h4>
+
+<p>An early convention on Unix systems was to name C++ files with an upper-case
+extention, <code>.C</code>. This does not work on Windows or MacOS where the
+filesystems are case-insensitive, and the C++ build rule was causing problems so
+has been eliminated. Any remaining C++ source files that are still using this
+convention will have to be renamed, preferably to <code>.cpp</code></p>
+
+<h4>Support <code>make -s</code> on Windows</h4>
+
+<p>The flag to silence build output did not work on some Windows architecture
+combinations. This has now been fixed.</p>
+
+<h4>iocLogServer now supports logrotate</h4>
+
+<p>The feature in the iocLogServer that closed and reopened the logfile used to
+ignore the SIGHUP signal when the log filename did not change. This has now been
+changed so these logfiles can be used with the standard Linux logrotate
+package.</p>
+
+
+<h2 align="center">Changes between 3.14.12 and 3.14.12.1</h2>
+
+<p>This release only contains changes that fix bugs or add build configuration
+files for new or updated target architectures.  No functionality has been
+changed, and as this is a patch release the software has not gone through as
+rigorous a testing regime as it does for a normal minor release.</p>
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>693534
+  <a href="https://launchpad.net/bugs/693534">
+    errlog causes crash on IOC exit</a></li>
+<li>701673
+  <a href="https://launchpad.net/bugs/701673">
+    Large array problem in 3.14.12</a></li>
+<li>717252
+  <a href="https://launchpad.net/bugs/771252">
+    local caput causes ioc crash on win32</a></li>
+<li>750549 
+  <a href="https://launchpad.net/bugs/750549 ">
+    epicsTime has non-portable c++ static initialization</a></li>
+<li>753137
+  <a href="https://launchpad.net/bugs/753137">
+    Makefile dependency checking of database files is broken</a></li>
+</ul>
+
+<h4>New/Updated target architectures</h4>
+
+<p>The following target architectures have been added or updated:</p>
+
+<dl>
+<dt>vxWorks-mpc8548</dt>
+<dt>vxWorks-mpc8548-debug</dt>
+<dd style="margin-bottom: 1ex">This PowerPC CPU is used on the Emerson MVME4100
+  VME CPU board (from Ernest Williams, SLAC).</dd>
+
+<dt>vxWorks-ppc32</dt>
+<dt>vxWorks-ppc32sf</dt>
+<dt>vxWorks-ppc32-debug</dt>
+<dt>vxWorks-ppc32sf-debug</dt>
+<dd style="margin-bottom: 1ex">New generic 32-bit PowerPC targets for vxWorks
+  6.x, using hardware or software floating-point. These targets can be used
+  instead of the CPU-specific ppc603, ppc604, mpc8540 and mpc8548 targets (and
+  their _long alternatives, these targets are all compiled with the -mlongcall
+  flag) to reduce the number of distinct build targets needed when supporting
+  multiple PowerPC board types.</dd>
+
+<dt>ios-386</dt>
+<dt>ios-arm</dt>
+<dd style="margin-bottom: 1ex">Updated for iOS 4.3, which is now the default OS
+  version (from Tom Palaia, ORNL).</dd>
+
+</dl>
+
+<h4>IOCSH_STARTUP_SCRIPT environment variable</h4>
+
+<p>The function <tt>iocsh(const char *pathname)</tt> now sets the environment
+variable <tt>IOCSH_STARTUP_SCRIPT</tt> to the value of its pathname
+argument before it starts executing the script commands.</p>
+
+<h4>RTEMS-mvme5500</h4>
+
+<p>This target now automatically links binary files with the bspExt library, and
+adds the extension <tt>.elf</tt> to their filenames, matching the other mvme
+targets.</p>
+
+<h4>RTEMS Network Buffer Configuration</h4>
+
+<p>Add the macros <tt>RTEMS_NETWORK_CONFIG_MBUF_SPACE</tt> and
+<tt>RTEMS_NETWORK_CONFIG_MBUF_SPACE</tt> to rtems_netconfig.c to allow
+customization of the network buffer space allocated.  The configuration files
+for the RTEMS-mvme3100, RTEMS-mvme5500 and RTEMS-beatnik targets now default to
+allocating 2MB for mbufs and 5MB for clusters; other RTEMS targets will continue
+to use 180KB and 350KB rspectively.</p>
+
+<h4>RTEMS TFTP filesystem</h4>
+
+<p>Use the new mount API to initialize TFTP on newer RTEMS versions.</p>
+
+<h4>C++ build issues on older Solaris compiler</h4>
+
+<p>Dirk Zimoch reported some problems building with an older SUNWspro C++
+compiler which have been resolved where possible.</p>
+
+<h4>FreeBSD broadcast problem</h4>
+
+<p>The <tt>ifreq_size</tt> macro in freebsd/osdsock.h must be different in BSD
+4.4.</p>
+
+<h4>Thread exit synchronization</h4>
+
+<p>When finished waiting for a thread to exit, signal the event in case other
+  threads are waiting also.</p>
+
+<h4>Win32 osdTime provider fix</h4>
+
+<p>Jeff Hill fixed the last time compare in PLL drift factor update loop.</p>
+
+<h4>Errlog can lose messages</h4>
+
+<p>Systems that generate large numbers of errlog messages or have a slow message
+  listener could overwrite older messages in the message buffer after the buffer
+  wraps. This also corrects and annotates the test code to describe what's being
+  checked.</p>
+
+<p>When the IOC is shutting down, the errlog thread should process all queued
+  messages before it quits.</p>
+
+<h4>Back-slash escapes for Win32</h4>
+
+<p>Stephen Norum pointed out the need for various Perl scripts to escape
+back-slash characters in Windows file paths.</p>
+
+<h4>catools on Windows</h4>
+
+<p>Windows 7 does not properly support line-mode buffering of stdio streams; the
+catools programs used this mode to ensure that they could be used in pipelines,
+but in Windows 7 they became fully buffered and are not flushed when the program
+exits, so buffering of stdout has now been completely disabled on Windows.</p>
 
 
 <h2 align="center">Changes between 3.14.11 and 3.14.12</h2>
-<!-- Insert new items immediately below here ... -->
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>541258
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541258">
+    compiler warnings in base</a></li>
+<li>541264
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541264">
+    CA subscription element count is fixed - eliminates compressed video
+    option</a></li>
+<li>541331
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541331">
+    Several devLib routines don't use vector table</a></li>
+<li>541391
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541391">
+    when subscribing for zero elements, array element count should be
+    dynamic</a></li>
+<li>545385
+  <a href="https://bugs.launchpad.net/epics-base/+bug/545385">
+    SIGFPE calculating epicsNAN, epicsINF</a></li>
+<li>546991
+  <a href="https://bugs.launchpad.net/epics-base/+bug/546991">
+    prev. value fields not initialized in init_record</a></li>
+<li>551909
+  <a href="https://bugs.launchpad.net/epics-base/+bug/551909">
+    macExpandString writes out of boundary</a></li>
+<li>552803
+  <a href="https://bugs.launchpad.net/epics-base/+bug/552803">
+    Compress record segfaults on ALG (algorithm) change</a></li>
+<li>571121
+  <a href="https://bugs.launchpad.net/epics-base/+bug/571121">
+    Perl issue compiling with INSTALL_LOCATION set</a></li>
+<li>572589
+  <a href="https://bugs.launchpad.net/epics-base/+bug/572589">
+    Make dbl emit empty strings for non-existent fields</a></li>
+<li>595154
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595154">
+    C++ errors building base using cygwin1.7</a></li>
+<li>595240
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595240">
+    C code uses C++ keywords as variable names</a></li>
+<li>595242
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595242">
+    C code uses C++ "//" style comments</a></li>
+<li>615916
+  <a href="https://bugs.launchpad.net/epics-base/+bug/615916">
+    Bug in RULES.Db breaks parallel make when using MSI</a></li>
+<li>625034
+  <a href="https://bugs.launchpad.net/epics-base/+bug/625034">
+    Remove compiler checks for VMS in src/toolsComm/flex</a></li>
+<li>626848
+  <a href="https://bugs.launchpad.net/epics-base/+bug/626848">
+    Build with GNU make 3.82 fails when installing libraries</a></li>
+<li>626859
+  <a href="https://bugs.launchpad.net/epics-base/+bug/626859">
+    RTEMS build does not create .d dependancy files</a></li>
+<li>627511
+  <a href="https://bugs.launchpad.net/epics-base/+bug/627511">
+    MSVC linker fails if input lib dirs start with forward slash</a></li>
+<li>644263
+  <a href="https://bugs.launchpad.net/epics-base/+bug/644263">
+    EPICS softIOC always dies in response to SIGHUP</a></li>
+<li>650000
+  <a href="https://bugs.launchpad.net/epics-base/+bug/650000">
+    caput tool won't write to mbbo w/o state strings</a></li>
+<li>663875
+  <a href="https://bugs.launchpad.net/epics-base/+bug/663875">
+    NTP broadcasts break NTP synchronization (RTEMS)</a></li>
+<li>667384
+  <a href="https://bugs.launchpad.net/epics-base/+bug/667384">
+    are the request and response bytes pending reversed in casr?</a></li>
+<li>680702
+  <a href="https://bugs.launchpad.net/epics-base/+bug/680702">
+    calc and calcout record get_precision bug</a></li>
+</ul>
+
+<h4>Support for Cygwin 1.7</h4>
+
+<p>Base can now built with shared libraries on Cygwin 1.7.x, although only with
+the gcc-3 compiler.  Cygwin 1.5.x only works when compiled without shared
+libraries (set <tt>STATIC_BUILD=YES</tt> and <tt>SHARED_LIBRARIES=NO</tt> in
+<tt>configure/CONFIG_SITE</tt>).  There is code in Base now that depends on the
+Cygwin version, so make sure that you rebuild Base if you upgrade your Cygwin
+installation.</p>
+
+<h4>epicsEvent</h4>
+
+<p>epicsEvent is now explicitly required to act as a simple binary semaphore.
+A single epicsEventSignal call must awaken just one thread when multiple
+threads are waiting for the event.  A test that checks for this has been
+added to epicsEventTest and the Application Developer's Guide has been updated
+to describe this requirement.</p>
+
+<h4>Enable array puts to subArray records</h4>
+
+<p>It is now possible to put an array into the VAL field of a soft channel
+subArray record whose INP field is empty. Processing the record then causes the
+sub-array extraction process to be done on the current VAL array. This can be
+used to feed a sequence of values into some other record (set INDX=1 and
+NELM=MALM and read one element out of the VAL field each time).</p>
 
 <h4>Added windows-x64 target</h4>
 
 <p>64-bit binaries for Microsoft Windows platforms can now be built using the
 target architecture windows-x64, which is also a valid cross-build target for a
-win32-x86 host.  We do not currently support 64-bit MinGW or Cygwin builds.</p>
+win32-x86 host.  We do not currently support or recommend trying to use 64-bit
+builds on MinGW or Cygwin.</p>
 
 <h4>Deleted osf-alpha targets</h4>
 
@@ -84,8 +786,8 @@ connections over ssh.  See the CA reference manual for more details.</p>
 <h4>Record Types aai and aao</h4>
 
 <ul>
-<li>Fixed bug in memory allocation that caused crashes when linking other records
-to aai or aao.</li>
+<li>Fixed bug in memory allocation that caused crashes when linking other
+records to aai or aao.</li>
 <li>Fixed bug where NELM was modified instead of NORD.</li>
 <li>Added Soft Channel device support.</li>
 <li>Added SIOL link and proper simulation mode for Soft Channel support.</li>
@@ -113,19 +815,20 @@ macro <tt>NO_DEVLIB_COMPAT</tt> is defined.</li>
 <li>The "virtual os" table was renamed from <tt>pdevLibVirtualOS</tt> to
 <tt>pdevLibVME</tt> reflecting the fact that other bus types will need seperate
 tables.</li>
-<li>The "virtual os" table API has been moved to a seperate header file,
+<li>The "virtual os" table API has been moved to a different header file,
 <tt>devLibVMEImpl.h</tt>.</li>
 </ul>
 
 <h4>DTYP and INP/OUT order</h4>
 
-<p>The fields DTYP and INP/OUT can now be specified in any order.</p>
+<p>The fields DTYP and INP/OUT can now be specified in any order in a database
+instance (.db) file.</p>
 
 <h4>Rewrite epicsThreadOnce()</h4>
 
 <p>Michael Davidsaver suggested a better implementation of epicsThreadOnce()
 which makes it possible for all architectures to detect recursive initialization
-functions.  This change also renames the routines to remove the original macro
+functions.  This change also renames the routines to remove the original macro,
 and fixes some questionable usage in places.</p>
 
 <h4>Many Record Types</h4>
@@ -136,7 +839,7 @@ giving correct initial monitor behavior in some circumstances.</p>
 
 <h4>Compress Record Type</h4>
 
-<p>Fixed crash when ALG (algorithm) was changed to Average at runtime.</p>
+<p>Fixed a crash when ALG (algorithm) was changed to Average at runtime.</p>
 
 <h4>configure/RELEASE Enhancements</h4>
 
@@ -148,9 +851,11 @@ definition is expanded.  The variable <tt>EPICS_HOST_ARCH</tt> can now be used,
 but target-architecture-specific values must be set in a target-specific
 <tt>configure/RELEASE</tt> file such as <tt>RELEASE.Common.linux-x86</tt>.</p>
 
-<h4>VxWorks 6.7 support</h4>
+<h4>VxWorks 6.7 and 6.8 support</h4>
 
-<p>Added build support for the latest Wind River release.</p>
+<p>Added build support for the latest Wind River releases.  This does not
+include the ability to run on SMP vxWorks systems though, those will need some
+more extensive modifications.</p>
 
 <h4>RTEMS 4.10 support</h4>
 
@@ -162,7 +867,7 @@ is used.</p>
 
 <p>Changes to the way in which we generate header dependency files, which are
 now named with a <tt>.d</tt> suffix instead of <tt>.depends</tt>.  We now use
-the compiler to generate these if possible, and create them in the
+the compiler to generate these where possible, and create them in the
 <tt>O.$(T_A)</tt> directory.</p>
 
 <h4>Installed file permissions</h4>
@@ -184,7 +889,11 @@ server.</p>
 readline; some need <tt>-lcurses</tt>, others <tt>-lncurses</tt> and others
 don't require either.  The <tt>configure/os/CONFIG_SITE.Common.linux-*</tt>
 files now make this configuration easy to choose between different settings for
-the <tt>COMMANDLINE_LIBRARY</tt> variable.</p>
+the <tt>COMMANDLINE_LIBRARY</tt> variable.  If your build fails as it's trying
+to create the <tt>antelope</tt> binary in the Base directory
+<tt>src/toolsComm/antelope/O.<i>arch</i></tt> this is almost certainly the
+problem. You will need to do a <tt>make rebuild</tt> from the top of Base after
+fixing the setting of <tt>COMMANDLINE_LIBRARY</tt>.</p>
 
 <h4>CA Command Line Tools Changes</h4>
 

src/RTEMS/base/Makefile

@@ -12,15 +12,14 @@ include $(TOP)/configure/CONFIG
 
 INC += epicsRtemsInitHooks.h
 
-SRCS += rtems_init.c
-SRCS += rtems_config.c
-SRCS += rtems_netconfig.c
-SRCS += rtems_util.c
-SRCS += setBootConfigFromNVRAM.c
-SRCS += epicsRtemsInitHookPre.c
-SRCS += epicsRtemsInitHookPost.c
+rtemsCom_SRCS += rtems_init.c
+rtemsCom_SRCS += rtems_config.c
+rtemsCom_SRCS += rtems_netconfig.c
+rtemsCom_SRCS += rtems_util.c
+rtemsCom_SRCS += setBootConfigFromNVRAM.c
+rtemsCom_SRCS += epicsRtemsInitHookPre.c
+rtemsCom_SRCS += epicsRtemsInitHookPost.c
 
 LIBRARY_RTEMS = rtemsCom
-LIBRARY_SRCS = $(SRCS) $(BUILD_ARCHS)
 
 include $(TOP)/configure/RULES

src/RTEMS/base/rtems_init.c

@@ -173,7 +173,7 @@ initialize_local_filesystem(char **argv)
 #if __RTEMS_MAJOR__>4 || \
    (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__>9) || \
    (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__==9 && __RTEMS_REVISION__==99)
-static int
+int
 nfsMount(char *uidhost, char *path, char *mntpoint)
 {
     int   devl = strlen(uidhost) + strlen(path) + 2;
@@ -209,7 +209,17 @@ initialize_remote_filesystem(char **argv, int hasLocalFilesystem)
 {
 #ifdef OMIT_NFS_SUPPORT
     printf ("***** Initializing TFTP *****\n");
+#if __RTEMS_MAJOR__>4 || \
+   (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__>9) || \
+   (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__==9 && __RTEMS_REVISION__==99)
+    mount_and_make_target_path(NULL,
+                               "/TFTP",
+                               RTEMS_FILESYSTEM_TYPE_TFTPFS,
+                               RTEMS_FILESYSTEM_READ_WRITE,
+                               NULL);
+#else
     rtems_bsdnet_initialize_tftp_filesystem ();
+#endif
     if (!hasLocalFilesystem) {
         char *path;
         int pathsize = 200;

src/RTEMS/base/rtems_netconfig.c

@@ -1,7 +1,6 @@
 /*************************************************************************\
 * Copyright (c) 2002 The University of Saskatchewan
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /*
@@ -93,6 +92,17 @@ static struct rtems_bsdnet_ifconfig bsp_driver_config = {
 # define MY_DO_BOOTP rtems_bsdnet_do_bootp
 #endif
 
+/*
+ * Allow site- and BSP-specific network buffer space configuration.
+ * The macro values are specified in KBytes.
+ */
+#ifndef RTEMS_NETWORK_CONFIG_MBUF_SPACE
+# define RTEMS_NETWORK_CONFIG_MBUF_SPACE 180
+#endif
+#ifndef RTEMS_NETWORK_CONFIG_CLUSTER_SPACE
+# define RTEMS_NETWORK_CONFIG_CLUSTER_SPACE 350
+#endif
+
 /*
  * Network configuration
  */
@@ -104,8 +114,8 @@ struct rtems_bsdnet_config rtems_bsdnet_config = {
                            /*   EPICS scan thread. */
                            /* If non-zero then the network daemons will run */
                            /*   at this *RTEMS* priority */
-    180*1024,              /* MBUF space */
-    350*1024,              /* MBUF cluster space */
+    RTEMS_NETWORK_CONFIG_MBUF_SPACE*1024,
+    RTEMS_NETWORK_CONFIG_CLUSTER_SPACE*1024,
     NULL,                  /* Host name */
     MY_DOMAINNAME,         /* Domain name */
 };

src/RTEMS/base/setBootConfigFromNVRAM.c

@@ -1,8 +1,16 @@
+/*************************************************************************\
+* Copyright (c) 2008 UChicago Argonne LLC, as Operator of Argonne
+*     National Laboratory.
+* EPICS BASE is distributed subject to a Software License Agreement found
+* in file LICENSE that is included with this distribution.
+\*************************************************************************/
+
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <arpa/inet.h>
 #include <netinet/in.h>
-#include <fcntl.h> /* for open() */
+#include <fcntl.h>
+#include <unistd.h>
 #include <rtems/rtems_bsdnet.h>
 #include <bsp.h>
 #include <string.h>
@@ -125,12 +133,13 @@ motScriptParm(const char *mot_script_boot, char parm)
     int l;
 
     while (*mot_script_boot != '\0') {
-        if (isspace(*mot_script_boot)
+        if (isspace(*(unsigned char *)mot_script_boot)
          && (*(mot_script_boot+1) == '-')
          && (*(mot_script_boot+2) == parm)) {
             mot_script_boot += 3;
             cp = mot_script_boot;
-            while ((*mot_script_boot != '\0') && !isspace(*mot_script_boot))
+            while ((*mot_script_boot != '\0') &&
+                   !isspace(*(unsigned char *)mot_script_boot))
                 mot_script_boot++;
             l = mot_script_boot - cp;
             ret = malloc(l+1);

src/as/asDbLib.c

@@ -1,11 +1,9 @@
-/* share/src/as/asDbLib.c */
 /*************************************************************************\
-* Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+* Copyright (c) 2012 UChicago Argonne LLC, as Operator of Argonne
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /* Author:  Marty Kraimer Date:    02-11-94*/
@@ -69,18 +67,23 @@ static long asDbAddRecords(void)
 
 int epicsShareAPI asSetFilename(const char *acf)
 {
-    if(pacf) free ((void *)pacf);
-    if(acf) {
-	pacf = calloc(1,strlen(acf)+1);
-	if(!pacf) {
-	    errMessage(0,"asSetFilename calloc failure");
-	} else {
-	    strcpy(pacf,acf);
-	}
+    if (pacf)
+        free (pacf);
+    if (acf) {
+        pacf = calloc(1, strlen(acf)+1);
+        if (!pacf) {
+            errMessage(0, "asSetFilename calloc failure");
+        } else {
+            strcpy(pacf, acf);
+            if (*pacf != '/' && !strchr(pacf, ':')) {
+                printf("asSetFilename: Warning - relative paths won't usually "
+                    "work\n");
+            }
+        }
     } else {
-	pacf = NULL;
+        pacf = NULL;
     }
-    return(0);
+    return 0;
 }
 
 int epicsShareAPI asSetSubstitutions(const char *substitutions)

src/bpt/Makefile

@@ -22,7 +22,8 @@ DBD += bptTypeKdegF.dbd
 
 PROD_LIBS = Com
 PROD_HOST += makeBpt
-makeBpt_SRCS=makeBpt
+
+makeBpt_SRCS = makeBpt
 
 include $(TOP)/configure/RULES
 

src/ca/CASG.cpp

@@ -25,8 +25,6 @@
 #include "cac.h"
 #include "sgAutoPtr.h"
 
-casgRecycle::~casgRecycle () {}
-
 CASG::CASG ( epicsGuard < epicsMutex > & guard, ca_client_context & cacIn ) :
     client ( cacIn ), magic ( CASG_MAGIC )
 {
@@ -38,12 +36,13 @@ CASG::~CASG ()
 }
 
 void CASG::destructor ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
 
     if ( this->verify ( guard ) ) {
-        this->reset ( guard );
+        this->reset ( cbGuard, guard );
         this->client.uninstallCASG ( guard, *this );
         this->magic = 0;
     }
@@ -127,36 +126,37 @@ int CASG::block (
         delay = cur_time - beg_time;
     }
 
-    this->reset ( guard );
-
     return status;
 }
 
 void CASG::reset ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->destroyCompletedIO ( guard );
-    this->destroyPendingIO ( guard );
+    this->destroyCompletedIO ( cbGuard, guard );
+    this->destroyPendingIO ( cbGuard, guard );
 }
 
 // lock must be applied
 void CASG::destroyCompletedIO ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     syncGroupNotify * pNotify;
     while ( ( pNotify = this->ioCompletedList.get () ) ) {
-        pNotify->destroy ( guard, * this );
+        pNotify->destroy ( cbGuard, guard );
     }
 }
 
 void CASG::destroyPendingIO ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     while ( syncGroupNotify * pNotify = this->ioPendingList.first () ) {
-        pNotify->cancel ( guard );
+        pNotify->cancel ( cbGuard, guard );
         // cancel must release the guard while 
         // canceling put callbacks so we
         // must double check list membership
@@ -166,7 +166,7 @@ void CASG::destroyPendingIO (
         else {
             this->ioCompletedList.remove ( *pNotify );
         }
-        pNotify->destroy ( guard, *this );
+        pNotify->destroy ( cbGuard, guard );
     }
 }
 
@@ -201,10 +201,11 @@ void CASG::show (
 }
 
 bool CASG::ioComplete (
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->destroyCompletedIO ( guard );
+    this->destroyCompletedIO ( cbGuard, guard );
     return this->ioPendingList.count () == 0u;
 }
 
@@ -212,9 +213,9 @@ void CASG::put ( epicsGuard < epicsMutex > & guard, chid pChan,
     unsigned type, arrayElementCount count, const void * pValue )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    sgAutoPtr < syncGroupWriteNotify > pNotify ( guard, *this, this->ioPendingList );
+    sgAutoPtr < syncGroupWriteNotify > pNotify ( guard, *this );
     pNotify = syncGroupWriteNotify::factory ( 
-        this->freeListWriteOP, *this, pChan );
+        this->freeListWriteOP, *this, & CASG :: recycleWriteNotifyIO, pChan );
     pNotify->begin ( guard, type, count, pValue );
     pNotify.release ();
 }
@@ -223,9 +224,9 @@ void CASG::get ( epicsGuard < epicsMutex > & guard, chid pChan,
                 unsigned type, arrayElementCount count, void *pValue )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    sgAutoPtr < syncGroupReadNotify > pNotify ( guard, *this, this->ioPendingList );
+    sgAutoPtr < syncGroupReadNotify > pNotify ( guard, *this );
     pNotify = syncGroupReadNotify::factory ( 
-        this->freeListReadOP, *this, pChan, pValue );
+        this->freeListReadOP, *this, & CASG :: recycleReadNotifyIO, pChan, pValue );
     pNotify->begin ( guard, type, count );
     pNotify.release ();
 }
@@ -241,20 +242,20 @@ void CASG::completionNotify (
     }
 }
 
-void CASG::recycleSyncGroupWriteNotify ( 
-    epicsGuard < epicsMutex > & guard, syncGroupWriteNotify & io )
-{
-    guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->freeListWriteOP.release ( & io );
-}
-
-void CASG::recycleSyncGroupReadNotify ( 
-    epicsGuard < epicsMutex > & guard, syncGroupReadNotify & io )
+void CASG :: recycleReadNotifyIO ( epicsGuard < epicsMutex > & guard, 
+                            syncGroupReadNotify & io )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     this->freeListReadOP.release ( & io );
 }
 
+void CASG :: recycleWriteNotifyIO ( epicsGuard < epicsMutex > & guard, 
+                            syncGroupWriteNotify & io )
+{
+    guard.assertIdenticalMutex ( this->client.mutexRef() );
+    this->freeListWriteOP.release ( & io );
+}
+
 int CASG :: printFormated ( const char *pformat, ... )
 {
     va_list theArgs;
@@ -295,13 +296,6 @@ void CASG::exception (
     }
 }
 
-void * CASG::operator new ( size_t ) // X aCC 361
-{
-    // The HPUX compiler seems to require this even though no code
-    // calls it directly
-    throw std::logic_error ( "why is the compiler calling private operator new" );
-}
-
 void CASG::operator delete ( void * )
 {
     // Visual C++ .net appears to require operator delete if

src/ca/CAref.html

@@ -64,6 +64,7 @@ $Date$</span></small></p>
   <li><a href="#Network">IP Network Administration Background
   Information</a></li>
   <li><a href="#port">IP port numbers</a></li>
+  <li><a href="#firewall">Firewalls</a></li>
   <li><a href="#Environmen">WAN Environment</a></li>
   <li><a href="#Disconnect">Disconnect Time Out Interval / Server Beacon
     Period</a></li>
@@ -164,7 +165,8 @@ $Date$</span></small></p>
   <li><a href="#ca_pend_io">block for certain requests to complete</a></li>
   <li><a href="#ca_test_io">test to see if certain requests have
   completed</a></li>
-  <li><a href="#ca_pend_event">process CA client library background activities</a></li>
+  <li><a href="#ca_pend_event">process CA client library background
+    activities</a></li>
   <li><a href="#ca_flush_io">flush outstanding requests to the server</a></li>
   <li><a href="#ca_add_exception_event">replace the default exception
     handler</a></li>
@@ -245,7 +247,7 @@ $Date$</span></small></p>
 
 <h3>Why Reconfigure Channel Access</h3>
 
-<p>Typically reasons to reconfigure EPICS Channel Access:</p>
+<p>Typical reasons to reconfigure EPICS Channel Access:</p>
 <ul>
   <li>Two independent control systems must share a network without fear of
     interaction</li>
@@ -451,6 +453,26 @@ different port numbers then an extended syntax may be used with the
 EPICS_CA_ADDR_LIST environment variable. See <a href="#Environmen">WAN
 Environment</a> below.</p>
 
+<h3><a name="firewall">Firewalls</a></h3>
+
+<p>If you want channel access clients on a machine to be able to see beacons
+and replies to broadcast PV search requests, you need to permit inbound UDP
+packets with source port EPICS_CA_SERVER_PORT (default is 5064) or destination
+port EPICS_CA_REPEATER_PORT (default is 5065). On systems using iptables this
+can be accomplished by rules like</p>
+<pre>     -A INPUT -s 192.168.0.0/22 -p udp --sport 5064 -j ACCEPT
+     -A INPUT -s 192.168.0.0/22 -p udp --dport 5065 -j ACCEPT</pre>
+
+<p>If you want channel access servers (e.g. "soft IOCs") on a machine to be
+able to be seen by clients, you need to permit inbound TCP or UDP packets with
+destination port EPICS_CA_SERVER_PORT (default is 5064). On systems using
+iptables this can be accomplished by rules like</p>
+<pre>     -A INPUT -s 192.168.0.0/22 -p udp --dport 5064 -j ACCEPT
+     -A INPUT -s 192.168.0.0/22 -p tcp --dport 5064 -j ACCEPT</pre>
+
+<p>In all cases the "-s 192.168.0.0/22" specifies the range of addresses from
+which you wish to accept packets.</p>
+
 <h3><a name="Environmen">WAN Environment</a></h3>
 
 <p>When the CA client library connects a channel it must first determine the IP
@@ -471,9 +493,8 @@ broadcast address of that subnet is added to the list. For each point to point
 interface found, the destination address of that link is added to the list.
 This automatic server address list initialization can be disabled if the EPICS
 environment variable EPICS_CA_AUTO_ADDR_LIST exists and its value is either
-of "no" or "NO". The typical default is to enable network interface
-introspection driven initialization with EPICS_CA_AUTO_ADDR_LIST set to "YES"
-or "yes".</p>
+"no" or "NO". The typical default is to enable network interface introspection
+driven initialization with EPICS_CA_AUTO_ADDR_LIST set to "YES" or "yes".</p>
 
 <p>Following network interface introspection, any IP addresses specified in the
 EPICS environment variable EPICS_CA_ADDR_LIST are added to the list of
@@ -484,8 +505,8 @@ CA servers unless a CA proxy (gateway) is installed. The addresses in
 EPICS_CA_ADDR_LIST may be dotted IP addresses or host names if the local OS has
 support for host name to IP address translation. When multiple names are added
 to EPICS_CA_ADDR_LIST they must be separated by white space. There is no
-requirement that the addresses specified in the EPICS_CA_ADDR_LIST be
-broadcast addresses, but this will often be the most convenient choice.</p>
+requirement that the addresses specified in the EPICS_CA_ADDR_LIST be broadcast
+addresses, but this will often be the most convenient choice.</p>
 
 <p>For any IP addresses specified in the EPICS environment variable
 EPICS_CA_NAME_SERVERS, TCP connections are opened and used for CA client name
@@ -533,7 +554,7 @@ default to EPICS_CA_SERVER_PORT.</p>
 <p>Frequently vxWorks systems boot by default with routes limiting access only
 to the local subnet. If a EPICS system is operating in a WAN environment it may
 be necessary to configure routes into the vxWorks system which enable a vxWorks
-based CA server to respond to requests originating outside it's subnet. These
+based CA server to respond to requests originating outside its subnet. These
 routing restrictions can also apply to vxWorks base CA clients communicating
 with off subnet servers. An EPICS system manager can implement an rudimentary,
 but robust, form of access control for a particular host by not providing
@@ -838,8 +859,8 @@ the contents of EPICS_CA_ADDR_LIST is used to augment the list. Otherwise, the
 list is not augmented.</p>
 
 <p>The EPICS_CAS_BEACON_PORT parameter specifies the destination port for
-server beacons. The only exception to this occurs when  ports are specified
-in EPICS_CAS_BEACON_ADDR_LIST or possibly in EPICS_CA_ADDR_LIST. If
+server beacons. The only exception to this occurs when ports are specified in
+EPICS_CAS_BEACON_ADDR_LIST or possibly in EPICS_CA_ADDR_LIST. If
 EPICS_CAS_BEACON_PORT is not specified then beacons are sent to the port
 specified in EPICS_CA_REPEATER_PORT.</p>
 
@@ -847,7 +868,7 @@ specified in EPICS_CA_REPEATER_PORT.</p>
 
 <p>The parameter EPICS_CAS_INTF_ADDR_LIST allows a ca server to bind itself to,
 and therefore accept messages only over, a limited set of the local host's
-network interfaces (each specified by it's IP address). On UNIX systems type
+network interfaces (each specified by its IP address). On UNIX systems type
 "netstat -i" (type "ipconfig" on windows) to see a list of the local host's
 network interfaces. Specifically, UDP search messages addressed to both the IP
 addresses in EPICS_CAS_INTF_ADDR_LIST and also to the broadcast addresses of
@@ -1295,7 +1316,7 @@ the output.</p>
     </tr>
     <tr>
       <td>-s</td>
-      <td>Get value as string (may honour server-side precision)</td>
+      <td>Get value as string (honors server-side precision)</td>
     </tr>
     <tr>
       <td>-lx</td>
@@ -1439,7 +1460,7 @@ the output.</p>
     </tr>
     <tr>
       <td>-s</td>
-      <td>Get value as string (may honour server-side precision)</td>
+      <td>Get value as string (honors server-side precision)</td>
     </tr>
     <tr>
       <td>-lx</td>
@@ -1858,7 +1879,7 @@ order to connect to this new beacon-out-of-range server. The typical situation
 where a client would not see the server's beacon might be when the client isnt
 on the same IP subnet as the server, and the client's EPICS_CA_ADDR_LIST was
 modified to include a destination address for the server, but the server's
-beacon address list was not modified so that it's beacons are received by the
+beacon address list was not modified so that its beacons are received by the
 client.</p>
 
 <h4><a name="Server1">A Server's IP Address Was Changed</a></h4>
@@ -1911,8 +1932,8 @@ Termination Appear to be Ignored</a></h3>
 <p>Short lived CA client applications that issue a CA put request and then
 immediately exit the process (return from <code>main</code> or call
 <code>exit</code>) may find that there request isn't executed. To guarantee
-that the request is sent call <code>ca_flush</code> followed by
-<code>ca_context_destroy</code> prior to terminating the process.</p>
+that the request is sent call <code>ca_flush_io()</code> followed by
+<code>ca_context_destroy()</code> prior to terminating the process.</p>
 
 <h3><a name="Problems">ENOBUFS Messages</a></h3>
 
@@ -1990,8 +2011,8 @@ OS and even between different versions of the same OS.</p>
 <p>If the subscription update producer in the server produces subscription
 updates faster than the subscription update consumer in the client consumes
 them, then events have to be discarded if the buffering in the server
-isn't allowed to grow to an infinite size. This is a law of nature
-- based on queuing theory of course.</p>
+isn't allowed to grow to an infinite size. This is a law of nature &ndash;
+based on queuing theory of course.</p>
 
 <p>What is done depends on the version of the CA server. All server versions
 place quotas on the maximum number of subscription updates allowed on the
@@ -2013,10 +2034,10 @@ server to resume with subscription updates. This prevents slow clients from
 getting time warped, but also guarantees that intervening events are discarded
 until the slow client catches up.</p>
 
-<p>There is currently no message on the IOC's console when a
-particular client is slow on the uptake. A message of this type used to exist
-many years ago, but it was a source of confusion (and what we will call
-message noise) so it was removed. </p>
+<p>There is currently no message on the IOC's console when a particular client
+is slow on the uptake. A message of this type used to exist many years ago, but
+it was a source of confusion (and what we will call message noise) so it was
+removed.</p>
 
 <p>There is unfortunately no field in the protocol allowing the server to
 indicate that an intervening subscription update was discarded. We should
@@ -2293,7 +2314,7 @@ int main ( int argc, char ** argv )
 
 <p>Certain CA client initiated requests asynchronously execute an application
 supplied call back in the client process when a response arrives. The functions
-ca_put_callback, ca_get_callback, and ca_add_event all request notification of
+ca_put_callback, ca_get_callback, and ca_create_subscription all request notification of
 asynchronous completion via this mechanism. The <code>event_handler_args
 </code>structure is passed <em>by value</em> to the application supplied
 callback. In this structure the <code>dbr</code> field is a void pointer to any
@@ -2328,8 +2349,8 @@ void myCallback ( struct event_handler_args args )
 <h3><a name="Channel1">Channel Access Exceptions</a></h3>
 
 <p>When the server detects a failure, and there is no client call back function
-attached to the request, an exception handler is executed in the client.
-The default exception handler prints a message on the console and exits if the
+attached to the request, an exception handler is executed in the client. The
+default exception handler prints a message on the console and exits if the
 exception condition is severe. Certain internal exceptions within the CA client
 library, and failures detected by the SEVCHK macro may also cause the exception
 handler to be invoked. To modify this behavior see <a
@@ -2396,12 +2417,12 @@ same process).</p>
 all OS (in past releases the library was thread safe only on vxWorks). When the
 client library is initialized the programmer may specify if preemptive callback
 is to be enabled. Preemptive callback is disabled by default. If preemptive
-callback is enabled, then the user's callback functions might be called by
-CA's auxiliary threads when the main initiating channel access thread is not
-inside of a function in the channel access client library. Otherwise, the
-user's callback functions will be called only when the main initiating channel
-access thread is executing inside of the CA client library. When the CA client
-library invokes a user's callback function, it will always wait for the current
+callback is enabled, then the user's callback functions might be called by CA's
+auxiliary threads when the main initiating channel access thread is not inside
+of a function in the channel access client library. Otherwise, the user's
+callback functions will be called only when the main initiating channel access
+thread is executing inside of the CA client library. When the CA client library
+invokes a user's callback function, it will always wait for the current
 callback to complete prior to executing another callback function. Programmers
 enabling preemptive callback should be familiar with using mutex locks to
 create a reliable multi-threaded program.</p>
@@ -2430,10 +2451,10 @@ address space (process) to be independent of each other. For example, the
 database CA links and the sequencer are designed to not use the same CA client
 library threads, network circuits, and data structures. Each thread that calls
 <a href="#ca_context_create">ca_context_create()</a> for the first time either
-directly or implicitly when calling any CA library function for the first
-time, creates a CA client library context. A CA client library context contains
-all of the threads, network circuits, and data structures required to connect
-and communicate with the channels that a CA client application has created. The
+directly or implicitly when calling any CA library function for the first time,
+creates a CA client library context. A CA client library context contains all
+of the threads, network circuits, and data structures required to connect and
+communicate with the channels that a CA client application has created. The
 priority of auxiliary threads spawned by the CA client library are at fixed
 offsets from the priority of the thread that called <a
 href="#ca_context_create">ca_context_create()</a>. An application specific
@@ -2503,9 +2524,9 @@ questionable practice for the following reasons.</p>
 <ul>
   <li>The vxWorks shell thread runs at the very highest priority in the system
     and therefore socket calls are made at a priority that is above the
-    priority of tNetTask - a practice that has caused the WRS IP kernel
-    to get sick in the past. That symptom was observed some time ago, but we
-    don't know if WRS has fixed the problem.</li>
+    priority of tNetTask. This has caused problems with the WRS IP kernel in
+    the past. That symptom was observed some time ago, but we don't know if
+    WRS has fixed the problem.</li>
 </ul>
 <ul>
   <li>The vxWorks shell thread runs at the very highest priority in the system
@@ -2621,7 +2642,7 @@ get called in the correct order.</p>
 resources used by the client library such as sockets and allocated memory are
 automatically released by the system when the process exits and
 ca_context_destroy() hasn't been called, but on light weight systems such as
-vxWorks or RTEMS no cleanup occurs unless the application call
+vxWorks or RTEMS no cleanup occurs unless the application calls
 ca_context_destroy().</p>
 
 <h4>Returns</h4>
@@ -2634,16 +2655,10 @@ ca_context_destroy().</p>
 
 <h3><code><a name="ca_create_channel">ca_create_channel()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
-typedef void ( *pCallBack ) (
-         struct connection_handler_args );
-int ca_create_channel
-(
-        const char     *PROCESS_VARIABLE_NAME, 
-        caCh           *USERFUNC, 
-        void           *PUSER,
-        capri          priority,
-        chid           *PCHID
-);</pre>
+typedef void ( caCh ) (struct connection_handler_args);
+int ca_create_channel (const char *PVNAME,
+        caCh *USERFUNC, void *PUSER,
+        capri PRIORITY, chid *PCHID );</pre>
 
 <h4>Description</h4>
 
@@ -2658,7 +2673,7 @@ on a channel.</p>
 
 <p>The circuit may be initially connected or disconnected depending on the
 state of the network and the location of the channel. A channel will only enter
-a connected state after server's address is determined, and only if channel
+a connected state after the server's address is determined, and only if channel
 access successfully establishes a virtual circuit through the network to the
 server. Channel access routines that send a request to a server will return
 ECA_DISCONNCHID if the channel is currently disconnected.</p>
@@ -2668,7 +2683,7 @@ a connected state.</p>
 <ul>
   <li>The first and simplest method requires that you call ca_pend_io(), and
     wait for successful completion, prior to using a channel that was created
-    specifying a nil connection call back function pointer.</li>
+    specifying a nill connection call back function pointer.</li>
   <li>The second method requires that you register a connection handler by
     supplying a valid connection callback function pointer. This connection
     handler is called whenever the connection state of the channel changes. If
@@ -2692,7 +2707,7 @@ time.</p>
 
 <h4>Arguments</h4>
 <dl>
-  <dt><code>PROCESS_VARIABLE_NAME</code></dt>
+  <dt><code>PVNAME</code></dt>
     <dd>A nil terminated process variable name string. EPICS process control
       function block database variable names are of the form "&lt;record
       name&gt;.&lt;field name&gt;". If the field name and the period separator
@@ -2704,10 +2719,10 @@ time.</p>
   <dt><code>USERFUNC</code></dt>
     <dd>Optional address of the user's call back function to be run when the
       connection state changes. Casual users of channel access may decide to
-      set this field to nil or 0 if they do not need to have a call back
+      set this field to nill or 0 if they do not need to have a call back
       function run in response to each connection state change event.
       <p>The following structure is passed <em>by value </em>to the user's
-      connection connection callback function. The <code>op</code> field will
+      connection callback function. The <code>op</code> field will
       be set by the CA client library to <code>CA_OP_CONN_UP</code> when the
       channel connects, and to <code>CA_OP_CONN_DOWN</code> when the channel
       disconnects. See <code><a href="#ca_puser">ca_puser</a></code> if the
@@ -2724,7 +2739,7 @@ time.</p>
     <dd>The value of this void pointer argument is retained in
       storage associated with the specified channel. See the MACROS manual page
       for reading and writing this field. Casual users of channel access may
-      wish to set this field to nil or 0.</dd>
+      wish to set this field to nill or 0.</dd>
 </dl>
 <dl>
   <dt><code>PRIORITY</code></dt>
@@ -2791,29 +2806,27 @@ subscriptions (monitors) registered with the channel.</p>
 <pre>#include &lt;cadef.h&gt;
 int ca_put ( chtype TYPE, 
         chid CHID, void *PVALUE ); 
-int ca_array_put ( chtype TYPE, 
-        unsigned long COUNT, 
+int ca_array_put ( chtype TYPE, unsigned long COUNT, 
         chid CHID, const void *PVALUE);
-typedef void ( *pCallBack ) (struct event_handler_args );
+typedef void ( caEventCallBackFunc ) (struct event_handler_args);
 int ca_put_callback ( chtype TYPE, 
         chid CHID, const void *PVALUE, 
-        pCallBack PFUNC, void *USERARG ); 
-int ca_array_put_callback ( chtype TYPE, 
-        unsigned long COUNT, 
+        caEventCallBackFunc PFUNC, void *USERARG ); 
+int ca_array_put_callback ( chtype TYPE, unsigned long COUNT, 
         chid CHID, const void *PVALUE, 
-        pCallBack PFUNC, void *USERARG );</pre>
+        caEventCallBackFunc PFUNC, void *USERARG );</pre>
 
 <h4>Description</h4>
 
 <p>Write a scalar or array value to a process variable.</p>
 
-<p>When ca_array_put  or ca_put are invoked the client will receive no response
+<p>When ca_put or ca_array_put are invoked the client will receive no response
 unless the request can not be fulfilled in the server. If unsuccessful an
 exception handler is run on the client side.</p>
 
-<p>When ca_array_put_callback are invoked the user supplied asynchronous call
-back is called only after the initiated write operation, and all actions
-resulting from the initiating write operation, complete.</p>
+<p>When ca_put_callback or ca_array_put_callback are invoked the user supplied
+asynchronous call back is called only after the initiated write operation, and
+all actions resulting from the initiating write operation, complete.</p>
 
 <p>If unsuccessful the call back function is invoked indicating failure status.
 </p>
@@ -2834,7 +2847,7 @@ This allows several requests to be efficiently combined into one message.</p>
 <h4>Description (IOC Database Specific)</h4>
 
 <p>A CA put request causes the record to process if the record's SCAN field is
-set to passive, and the field being written has it's process passive attribute
+set to passive, and the field being written has its process passive attribute
 set to true. If such a record is already processing when a put request is
 initiated the specified field is written immediately, and the record is
 scheduled to process again as soon as it finishes processing. Earlier instances
@@ -2842,20 +2855,19 @@ of multiple put requests initiated while the record is being processing may be
 discarded, but the last put request initiated is always written and
 processed.</p>
 
-<p>A CA put <span style="font-style: italic;">callback</span> request causes
-the record to process if the record's SCAN field is set to passive, and the
-field being written has it's process passive attribute set to true. For such a
-record, the user's put callback function is not called until after the record,
-and any records that the record links to, finish processing. If such a record
-is already processing when a put <span
-style="font-style: italic;">callback</span> request is initiated the put <span
-style="font-style: italic;">callback</span> request is postponed until the
-record, and any records it links to, finish processing.</p>
+<p>A CA put <em>callback</em> request causes the record to process if the
+record's SCAN field is set to passive, and the field being written has its
+process passive attribute set to true. For such a record, the user's put
+callback function is not called until after the record, and any records that
+the record links to, finish processing. If such a record is already processing
+when a put <em>callback</em> request is initiated the put <em>callback</em>
+request is postponed until the record, and any records it links to, finish
+processing.</p>
 
 <p>If the record's SCAN field is not set to passive, or the field being written
-has it's process passive attribute set to false then the CA put or CA put
-callback request cause the specified field to be immediately written, but they
-do not cause the record to be processed.</p>
+has its process passive attribute set to false then the CA put or CA put
+<em>callback</em> request cause the specified field to be immediately written,
+but they do not cause the record to be processed.</p>
 
 <h4>Arguments</h4>
 <dl>
@@ -2921,18 +2933,19 @@ int ca_get ( chtype TYPE,
         chid CHID, void *PVALUE );
 int ca_array_get ( chtype TYPE, unsigned long COUNT,
         chid CHID, void *PVALUE );
-typedef void ( *pCallBack ) (struct event_handler_args );
+typedef void ( caEventCallBackFunc ) (struct event_handler_args);
 int ca_get_callback ( chtype TYPE,
-        chid CHID, pCallBack USERFUNC, void *USERARG);
+        chid CHID,
+        caEventCallBackFunc USERFUNC, void *USERARG);
 int ca_array_get_callback ( chtype TYPE, unsigned long COUNT,
         chid CHID,
-        pCallBack USERFUNC, void *USERARG );</pre>
+        caEventCallBackFunc USERFUNC, void *USERARG);</pre>
 
 <h4>Description</h4>
 
 <p>Read a scalar or array value from a process variable.</p>
 
-<p>When ca_get or ca_array_get are invoked the returned channel value cant be
+<p>When ca_get or ca_array_get are invoked the returned channel value can't be
 assumed to be stable in the application supplied buffer until after ECA_NORMAL
 is returned from ca_pend_io. If a connection is lost outstanding ca get
 requests are not automatically reissued following reconnect.</p>
@@ -3024,11 +3037,10 @@ when a CA get request is initiated.</p>
 
 <h3><code><a name="ca_add_event">ca_create_subscription()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
-typedef void ( *pCallBack ) (
-        struct event_handler_args );
-int ca_create_subscription ( chtype TYPE, 
-        unsigned long COUNT, chid CHID, 
-        unsigned long MASK, pCallBack USERFUNC, void *USERARG, 
+typedef void ( caEventCallBackFunc ) (struct event_handler_args);
+int ca_create_subscription ( chtype TYPE, unsigned long COUNT,
+        chid CHID, unsigned long MASK,
+        caEventCallBackFunc USERFUNC, void *USERARG, 
         evid *PEVID );</pre>
 
 <h4>Description</h4>
@@ -3037,10 +3049,10 @@ int ca_create_subscription ( chtype TYPE,
 invoked whenever the process variable undergoes significant state changes. A
 significant change can be a change in the process variable's value, alarm
 status, or alarm severity. In the process control function block database the
-deadband field determines the magnitude of a significant change for for the
+deadband field determines the magnitude of a significant change for the
 process variable's value. Each call to this function consumes resources in the
 client library and potentially a CA server until one of ca_clear_channel or
-ca_clear_event is called.</p>
+ca_clear_subscription is called.</p>
 
 <p>Subscriptions may be installed or canceled against both connected and
 disconnected channels. The specified USERFUNC is called once immediately after
@@ -3048,7 +3060,7 @@ the subscription is installed with the process variable's current state if the
 process variable is connected. Otherwise, the specified USERFUNC is called
 immediately after establishing a connection (or reconnection) with the process
 variable. The specified USERFUNC is called immediately with the process
-variable's current state from within ca_add_event() if the client and the
+variable's current state from within ca_create_subscription() if the client and the
 process variable share the same address space.</p>
 
 <p>If a subscription is installed on a channel in a disconnected state then the
@@ -3105,8 +3117,8 @@ indicating the current state of the channel.</p>
 <dl>
   <dt><code>PEVID</code></dt>
     <dd>This is a pointer to user supplied event id which is overwritten if
-      successful. This event id can later be used to clear a specific
-      event. This option may may be omitted by passing a nil pointer.</dd>
+      successful. This event id can later be used to clear a specific event.
+      This option may be omitted by passing a nill pointer.</dd>
 </dl>
 <dl>
   <dt><code>MASK</code></dt>
@@ -3154,7 +3166,7 @@ int ca_clear_subscription ( evid EVID );</pre>
 
 <p>Cancel a subscription.</p>
 
-<p>All ca_clear_event() requests such as the above are accumulated (buffered)
+<p>All cancel-subscription requests such as the above are accumulated (buffered)
 and not forwarded to the server until one of ca_flush_io, ca_pend_io,
 ca_pend_event, or ca_sg_pend are called. This allows several requests to be
 efficiently sent together in one message.</p>
@@ -3162,7 +3174,7 @@ efficiently sent together in one message.</p>
 <h4>Arguments</h4>
 <dl>
   <dt>EVID</dt>
-    <dd>event id returned by ca_add_event()</dd>
+    <dd>event id returned by ca_create_subscription()</dd>
 </dl>
 
 <h4>Returns</h4>
@@ -3213,9 +3225,9 @@ activities</em>.</p>
 network delays such as Ethernet collision exponential back off until
 retransmission delays which can be quite long on overloaded networks.</p>
 
-<p>Unlike <code><a href="#ca_pend_event">ca_pend_event</a></code>, this routine will
-not process CA's background activities if none of the selected IO requests are
-pending.</p>
+<p>Unlike <code><a href="#ca_pend_event">ca_pend_event</a></code>, this routine
+will not process CA's background activities if none of the selected IO requests
+are pending.</p>
 
 <h4>Arguments</h4>
 <dl>
@@ -3278,7 +3290,7 @@ activity is processed for TIMEOUT seconds.</p>
 background activity is processed.</p>
 
 <p>The ca_pend_event function will <em>not</em> return before the specified
-time-out expires and all unfinished channel access labor has been processed,
+timeout expires and all unfinished channel access labor has been processed,
 and unlike <code><a href="#ca_pend_io">ca_pend_io</a></code> returning from the
 function does <em>not </em>indicate anything about the status of pending IO
 requests.</p>
@@ -3390,7 +3402,7 @@ field should not be used.</p>
 <dl>
   <dt><code>USERFUNC</code></dt>
     <dd>Address of user callback function to be executed when an exceptions
-      occur. Passing a nil value causes the default exception handler to be
+      occur. Passing a nill value causes the default exception handler to be
       reinstalled. The following structure is passed by value to the user's
       callback function. Currently, the <code>op</code> field can be one of
       <code>CA_OP_GET, CA_OP_PUT, CA_OP_CREATE_CHANNEL, CA_OP_ADD_EVENT,
@@ -3513,7 +3525,7 @@ get the lowest latency response to the arrival of CA messages.</p>
 <h3><code><a name="ca_replace_printf_handler">ca_replace_printf_handler
 ()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
-typedef int caPrintfFunc ( const char *pFromat, va_list args );
+typedef int caPrintfFunc ( const char *pFormat, va_list args );
 int ca_replace_printf_handler ( caPrintfFunc *PFUNC );</pre>
 
 <h4>Description</h4>
@@ -3525,7 +3537,7 @@ default handler uses fprintf to send messages to 'stderr'.</p>
 <dl>
   <dt><code>PFUNC</code></dt>
     <dd>The address of a user supplied call back handler to be invoked when CA
-      prints diagnostic messages. Installing a nil pointer will cause the
+      prints diagnostic messages. Installing a nill pointer will cause the
       default call back handler to be reinstalled.</dd>
 </dl>
 
@@ -3544,8 +3556,9 @@ SEVCHK ( status, "failed to install my printf handler" );</pre>
 
 <h3><code><a name="ca_replace">ca_replace_access_rights_event()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
-typedef void ( *pCallBack )( struct access_rights_handler_args );
-int ca_replace_access_rights_event ( chid CHAN, pCallBack PFUNC );</pre>
+typedef void ( caEventCallBackFunc )(struct access_rights_handler_args);
+int ca_replace_access_rights_event ( chid CHAN,
+        caEventCallBackFunc PFUNC );</pre>
 
 <h4>Description</h4>
 
@@ -3571,7 +3584,7 @@ specified channel.</p>
 </dl>
 <dl>
   <dt><code>PFUNC</code></dt>
-    <dd>Address of user supplied call back function. A nil pointer uninstalls
+    <dd>Address of user supplied call back function. A nill pointer uninstalls
       the current handler. The following arguments are passed <em>by value</em>
       to the supplied callback handler. 
       <pre>typedef struct ca_access_rights {
@@ -3914,12 +3927,12 @@ prints diagnostics to standard out.</p>
 
 <h4>Examples</h4>
 <pre>void ca_test_event (); 
-status = ca_add_event ( type, chid, ca_test_event, NULL, NULL ); 
+status = ca_create_subscription ( type, chid, ca_test_event, NULL, NULL ); 
 SEVCHK ( status, .... );</pre>
 
 <h4>See Also</h4>
 
-<p><a href="#ca_add_event">ca_add_event</a>()</p>
+<p><a href="#ca_add_event">ca_create_subscription</a>()</p>
 
 <h3><code><a name="ca_sg_create">ca_sg_create()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
@@ -4002,7 +4015,7 @@ SEVCHK ( status, Sync group delete failed );</pre>
 
 <h3><code><a name="ca_sg_block">ca_sg_block()</a></code></h3>
 <pre>#include &lt;cadef.h&gt;
-int ca_sg_block ( CA_SYNC_GID GID, double timeout );</pre>
+int ca_sg_block ( CA_SYNC_GID GID, double TIMEOUT );</pre>
 
 <h4>Description</h4>
 
@@ -4023,13 +4036,16 @@ access background activity while it is waiting.</p>
 
 <h4>Arguments</h4>
 <dl>
-  <dt>GID</dt>
+  <dt><code>GID</code></dt>
     <dd>Identifier of the synchronous group.</dd>
+  <dt><code>TIMEOUT</code></dt>
+    <dd>The duration to block in this routine in seconds. A timeout of zero
+      seconds blocks forever.</dd>
 </dl>
 
 <h4>Examples</h4>
 <pre>CA_SYNC_GID gid;
-status = ca_sg_block(gid);
+status = ca_sg_block(gid, 0.0);
 SEVCHK(status, Sync group block failed);</pre>
 
 <h4>Returns</h4>
@@ -4240,8 +4256,8 @@ reissued.</p>
 
 <h3><code><a name="ca_client_status">ca_client_status()</a></code></h3>
 <pre>int ca_client_status ( unsigned level );
-int ca_context_status ( struct ca_client_context *, 
-       unsigned level );</pre>
+int ca_context_status ( struct ca_client_context *CONTEXT, 
+       unsigned LEVEL );</pre>
 
 <h4>Description</h4>
 
@@ -4252,7 +4268,7 @@ ca_client_status() prints information about the calling threads CA context.</p>
 <h4>Arguments</h4>
 <dl>
   <dt><code>CONTEXT</code></dt>
-    <dd>A pointer to the CA context to join with.</dd>
+    <dd>A pointer to the CA context to examine.</dd>
   <dt><code>LEVEL</code></dt>
     <dd>The interest level. Increasing level produces increasing detail.</dd>
 </dl>
@@ -4262,7 +4278,7 @@ ca_client_status() prints information about the calling threads CA context.</p>
 
 <h4>Description</h4>
 
-<p>Returns a pointer to the current thread's CA context. If none then nil is
+<p>Returns a pointer to the current thread's CA context. If none then nill is
 returned.</p>
 
 <h4>See Also</h4>
@@ -4295,12 +4311,11 @@ preemptively from more than one thread.</p>
 
 <h4>Returns</h4>
 
-<p>ECA_ISATTACHED - already attached to a CA context</p>
+<p>ECA_NORMAL - Normal successful completion</p>
 
-<p>ECA_NOTTHREADED - the specified context is non-preemptive and therefore does
-not allow other threads to join</p>
+<p>ECA_NOTTHREADED - Context is not preemptive so cannot be joined</p>
 
-<p>ECA_ISATTACHED - the current thread is already attached to a CA context</p>
+<p>ECA_ISATTACHED - Thread already attached to a CA context</p>
 
 <h4>See Also</h4>
 
@@ -4332,7 +4347,7 @@ that use ca_context_destroy).</p>
 <p><a href="#ca_context_destroy">ca_context_destroy</a>()</p>
 
 <h3><code><a name="ca_dump_dbr">ca_dump_dbr()</a></code></h3>
-<pre>void ca_dump_dbr (chtype TYPE, unsigned COUNT, const void * PDBR);</pre>
+<code><pre>void ca_dump_dbr (chtype TYPE, unsigned COUNT, const void * PDBR);</pre></code>
 
 <h4>Description</h4>
 

src/ca/Makefile

@@ -91,14 +91,19 @@ PROD_LIBS = ca Com
 # needed when its an object library build
 PROD_SYS_LIBS_WIN32 = ws2_32 advapi32 user32
 
-PROD_HOST += caRepeater catime acctst caConnTest casw caEventRate
-OBJS_IOC_vxWorks += catime acctst caConnTest casw caEventRate
+PROD_DEFAULT += caRepeater catime acctst caConnTest casw caEventRate
+PROD_vxWorks = -nil-
+PROD_RTEMS = -nil-
+PROD_iOS = -nil-
+
+OBJS_vxWorks = catime acctst caConnTest casw caEventRate acctstRegister
+
 caRepeater_SRCS = caRepeater.cpp
-catime_SRCS = catimeMain.c catime.c 
-acctst_SRCS = acctstMain.c acctst.c 
+catime_SRCS = catimeMain.c catime.c
+acctst_SRCS = acctstMain.c acctst.c
 caEventRate_SRCS = caEventRateMain.cpp caEventRate.cpp
 casw_SRCS = casw.cpp
-caConnTest_SRCS = caConnTestMain.cpp caConnTest.cpp 
+caConnTest_SRCS = caConnTestMain.cpp caConnTest.cpp
 
 casw_SYS_LIBS_solaris = socket
 

src/ca/access.cpp

@@ -376,15 +376,35 @@ int epicsShareAPI ca_create_channel (
 int epicsShareAPI ca_clear_channel ( chid pChan )
 {
     ca_client_context & cac = pChan->getClientCtx ();
-    epicsGuard < epicsMutex > guard ( cac.mutex );
-    try {
-        pChan->eliminateExcessiveSendBacklog ( guard );
+    {
+        epicsGuard < epicsMutex > guard ( cac.mutex );
+        try {
+            pChan->eliminateExcessiveSendBacklog ( guard );
+        }
+        catch ( cacChannel::notConnected & ) {
+            // intentionally ignored
+        }
     }
-    catch ( cacChannel::notConnected & ) {
-        // intentionally ignored
-    }
-    pChan->destructor ( guard );
+    if ( cac.pCallbackGuard.get() &&
+            cac.createdByThread == epicsThreadGetIdSelf () ) {
+        epicsGuard < epicsMutex > guard ( cac.mutex );
+        pChan->destructor ( *cac.pCallbackGuard.get(), guard );
     cac.oldChannelNotifyFreeList.release ( pChan );
+    }
+    else {
+        //
+        // we will definately stall out here if all of the
+        // following are true
+        //
+        // o user creates non-preemtive mode client library context
+        // o user doesnt periodically call a ca function
+        // o user calls this function from an auxiillary thread
+        //
+        CallbackGuard cbGuard ( cac.cbMutex );
+        epicsGuard < epicsMutex > guard ( cac.mutex );
+        pChan->destructor ( *cac.pCallbackGuard.get(), guard );
+        cac.oldChannelNotifyFreeList.release ( pChan );
+    }
     return ECA_NORMAL;
 }
 
@@ -433,7 +453,7 @@ chid epicsShareAPI ca_evid_to_chid ( evid pMon )
 }
 
 // extern "C"
-int epicsShareAPI ca_pend ( ca_real timeout, int early ) // X aCC 361
+int epicsShareAPI ca_pend ( ca_real timeout, int early )
 {
     if ( early ) {
         return ca_pend_io ( timeout );
@@ -516,7 +536,7 @@ int epicsShareAPI ca_flush_io ()
 /*
  *  CA_TEST_IO ()
  */
-int epicsShareAPI ca_test_io () // X aCC 361
+int epicsShareAPI ca_test_io ()
 {
     ca_client_context *pcac;
     int caStatus = fetchClientContext ( &pcac );
@@ -551,7 +571,7 @@ void epicsShareAPI ca_signal ( long ca_status, const char *message )
  * (if they call this routine again).
  */
 // extern "C"
-const char * epicsShareAPI ca_message ( long ca_status ) // X aCC 361
+const char * epicsShareAPI ca_message ( long ca_status )
 {
     unsigned msgNo = CA_EXTRACT_MSG_NO ( ca_status );