configure: Update Apple iOS builds

* Default IOS_VERSION to 5.0
* Allow ARMv6 and ARMv7 universal binaries by setting ARCH_CLASS
* Switch from g++ to clang++

configure/os/CONFIG.Common.ios-arm

@@ -1,17 +1,15 @@
 # CONFIG.Common.ios-arm
 #
+# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-arm target builds
+# Sites may override these definitions in CONFIG_SITE.Common.ios-arm
+# or CONFIG_SITE.<host>.ios-arm
 #-------------------------------------------------------
 
 IOS_PLATFORM = iPhoneOS
 
-#
-# Architecture-specific information
-#
-ARCH_CLASS = armv6
-
 OP_SYS_CFLAGS += -fno-inline-functions
 
 # iOS optimization flags for arm architecture

configure/os/CONFIG.Common.ios-x86

@@ -1,8 +1,11 @@
 # CONFIG.Common.ios-x86
 #
+# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-x86 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.ios-x86
+# or CONFIG_SITE.<host>.ios-x86
 #-------------------------------------------------------
 
 IOS_PLATFORM = iPhoneSimulator

configure/os/CONFIG.Common.iosCommon

@@ -3,7 +3,7 @@
 # $Revision-Id$
 # This file is maintained by the build community.
 #
-# Definitions for iOS target archs
+# Definitions for all Apple iOS builds
 # Sites may override these definitions in CONFIG_SITE.Common.iosCommon
 # or CONFIG_SITE.<host>.iosCommon
 #-------------------------------------------------------
@@ -29,8 +29,14 @@ SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM)$(IOS_VERSION).sdk
 
 #-------------------------------------------------------
 # Build architecture flags
-ARCH_DEP_CFLAGS += -arch $(ARCH_CLASS)
-ARCH_DEP_LDFLAGS += -arch $(ARCH_CLASS)
+#   ARCH_CLASS must contain a list of CPU architectures which must be
+#   valid arguments to the -arch options for the cc and ld commands.
+#   ARCH_CLASS is defined in a CONFIG_SITE file which is not loaded
+#   until after this file.
+#
+ARCH_DEP_FLAGS = $(addprefix -arch ,$(ARCH_CLASS))
+ARCH_DEP_CFLAGS += $(ARCH_DEP_FLAGS)
+ARCH_DEP_LDFLAGS += $(ARCH_DEP_FLAGS)
 
 #--------------------------------------------------
 # Operating system flags
@@ -49,9 +55,9 @@ OPT_CXXFLAGS_YES += -g
 #-------------------------------------------------------
 # Compiler definitions:
 #   Use clang instead of gcc
-#   Must use g++ still
 CC = $(GNU_BIN)/clang
-CCC = $(GNU_BIN)/c++
+CCC = $(GNU_BIN)/clang++
+GNU_LDLIBS_YES =
 
 #-------------------------------------------------------
 # Linker flags
@@ -80,6 +86,15 @@ vpath %.m $(USR_VPATH) $(ALL_SRC_DIRS)
 %.o: %.m
 	$(COMPILE.c) -c $<
 
+#--------------------------------------------------
+# Header dependency file generation
+#
+# Use compiler when ARCH_CLASS is a single arch value
+# otherwise use perl script command
+SINGLE_ARCH=$(filter 1,$(words $(ARCH_CLASS)))
+HDEPENDS_CFLAGS = $(if $(SINGLE_ARCH),$(HDEPENDS_CFLAGS_$(HDEPENDS)))
+HDEPENDS_METHOD = $(if $(SINGLE_ARCH),CFLAGS,CMD)
+
 #--------------------------------------------------
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.iosCommon

configure/os/CONFIG_SITE.Common.ios-arm

@@ -0,0 +1,28 @@
+# CONFIG_SITE.Common.ios-arm
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Site-specific settings for ios-arm target builds
+#-------------------------------------------------------
+
+# Which ARM instruction set(s) to generate code for:
+#   Most iOS devices can run programs compiled for both the
+#   ARMv6 and ARMv7 instruction sets. ARMv7 code is usually
+#   more efficient, but the older devices listed below can only
+#   use the ARMv6 instruction set. Including both architectures
+#   generates a Universal binary, which is larger and takes
+#   longer to compile but runs efficiently on all devices.
+#
+#   ARMv6-only devices: iPhone 1 or 3G, iPod Touch Gen 1 or 2
+#
+ARCH_CLASS = armv7
+#ARCH_CLASS = armv6 armv7
+#ARCH_CLASS = armv6
+
+
+# Uncomment these two definitions to use g++ instead of clang++
+# which may be needed in some circumstances:
+#
+#CCC = $(GNU_BIN)/c++
+#GNU_LDLIBS_YES = -lgcc

configure/os/CONFIG_SITE.Common.iosCommon

@@ -10,7 +10,8 @@
 
 #IOS_VERSION = 3.2
 #IOS_VERSION = 4.1
-IOS_VERSION = 4.3
+#IOS_VERSION = 4.3
+IOS_VERSION = 5.0
 
 
 # Most sites will want shared libraries

documentation/RELEASE_NOTES.html

@@ -13,6 +13,30 @@
 
 <!-- Insert new items immediately below here ... -->
 
+<h4>Build configurations updated for Apple iOS targets</h4>
+
+<p>The build process can now construct universal binaries containing both ARMv6
+and ARMv7 code, and several defaults have been changed when building for iOS
+targets:</p>
+
+<ul>
+
+<li>The default value for IOS_VERSION is now 5.0, edit the setting in
+<tt>configure/os/CONFIG_SITE.Common.iosCommon</tt> to use an older version.</li>
+
+<li>With the introduction of iOS 5.0 we have switched the C++ compiler for
+ios-arm from GNU g++ to using the LLVM-based clang++ (the GNU compilers are
+apparetnly no longer included with the SDK).  This can be switched back by
+editing the new <tt>CONFIG_SITE.Common.ios-arm</tt> file.</li>
+
+<li>Like the Darwin builds, universal binaries can now be compiled for the
+ios-arm target, containing either or both ARMv6 and ARMv7 instructions. This is
+configured by setting ARCH_CLASS in the new <tt>CONFIG_SITE.Common.ios-arm</tt>
+file. The default is now to build for ARMv7 only, which is not compatible with
+the original iPhone 1 or 3G, or with the iPod Touch Generations 1 or 2.</li>
+
+</ul>
+
 <h4>Added <tt>-b</tt> option to dbExpand</h4>
 
 <p>This turns off monotonic checking of breakpoint tables.</p>