R3.14.8.1

created by epicsThreadCreate().

LICENSE

@@ -1,29 +1,19 @@
-Copyright (c) 2002 University of Chicago and The Regents of the University
-of California. All rights reserved.
+Copyright (c) 1991-2004 University of Chicago and The Regents of the
+University of California. All rights reserved.
 
-EPICS BASE is distributed subject to the following license agreement:
+EPICS BASE is distributed subject to the following license conditions:
 
  SOFTWARE LICENSE AGREEMENT
  Software: EPICS BASE
  Versions: 3.13.7 and higher
 
-IMPORTANT! READ CAREFULLY: EPICS BASE is NOT distributed as Open Source.
-This is a legal agreement between you (in your capacity as an individual
-and as an agent for your company, institution or other entity) and The
-University of Chicago, as Operator of Argonne National Laboratory under
-Contract W-31-109-ENG-38 with the U.S. Department of Energy ("Argonne"),
-and The Regents of the University of California, as Operator of Los Alamos
-National Laboratory under Contract W-7405-ENG-36 with the U.S. Department
-of Energy ("Los Alamos").
-
  1. The "Software", below, refers to EPICS BASE (in either source code, or
     binary form and accompanying documentation). Each licensee is
     addressed as "you" or "Licensee."
 
- 2. Argonne and Los Alamos are copyright holders in the Software. The
-    copyright holders and their third-party licensors hereby grant
-    Licensee a royalty-free nonexclusive license, subject to the
-    limitations stated herein and U.S. Government license rights.
+ 2. The copyright holders shown above and their third-party licensors
+    hereby grant Licensee a royalty-free nonexclusive license, subject to
+    the limitations stated herein and U.S. Government license rights.
 
  3. You may modify and make a copy or copies of the Software for use
     within your organization, if you meet the following conditions:
@@ -44,39 +34,28 @@ of Energy ("Los Alamos").
          materials provided with the copy;
       c. Modified copies and works based on the Software must carry
          prominent notices stating that you changed specified portions of
-         the Software; and
-      d. Prior to sending a copy or modified copy of the Software to any
-         person or entity outside your organization you must verify with
-         Argonne that the intended recipient of the Software has executed
-         a license with Argonne for EPICS BASE. (See
-         http://www.aps.anl.gov/epics/license/verify.php for information
-         on how to contact Argonne.)
+         the Software.
 
- 5. THE SOFTWARE INCLUDES PORTIONS WHICH MAY REQUIRE SOME FORM OF EXPORT
-    CONTROL LICENSE FROM THE U.S. GOVERNMENT. FAILURE TO OBTAIN SUCH
-    EXPORT CONTROL LICENSE MAY RESULT IN CRIMINAL LIABILITY UNDER U.S.
-    LAWS.
-
- 6. Portions of the Software resulted from work developed under a U.S.
+ 5. Portions of the Software resulted from work developed under a U.S.
     Government contract and are subject to the following license: the
     Government is granted for itself and others acting on its behalf a
     paid-up, nonexclusive, irrevocable worldwide license in this computer
     software to reproduce, prepare derivative works, and perform publicly
     and display publicly.
 
- 7. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+ 6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
     OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
     UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
     EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
     BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-    FOR A PARTICULAR PURPOSE, TITLE OR NONINFRINGEMENT, (2) DO NOT ASSUME
+    FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME
     ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
     OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
     SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
-    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR FREE
+    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE
     OR THAT ANY ERRORS WILL BE CORRECTED.
 
- 8. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+ 7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
     THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
     OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
     CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
@@ -89,21 +68,17 @@ of Energy ("Los Alamos").
 ________________________________________________________________________
 
 This software is in part copyrighted by the BERLINER SPEICHERRING
-GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY),
-BERLIN, GERMANY.
+GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY), BERLIN, GERMANY.
 
-In no event shall BESSY be liable to any party for direct,
-indirect, special, incidental, or consequential damages arising
-out of the use of this software, its documentation, or any
-derivatives thereof, even if BESSY has been advised of the
-possibility of such damage.
+In no event shall BESSY be liable to any party for direct, indirect,
+special, incidental, or consequential damages arising out of the use of
+this software, its documentation, or any derivatives thereof, even if
+BESSY has been advised of the possibility of such damage.
 
-BESSY specifically disclaims any warranties, including, but not
-limited to, the implied warranties of merchantability, fitness for
-a particular purpose, and non-infringement.  This software is
-provided on an "as is" basis, and BESSY has no obligation to
-provide maintenance, support, updates, enhancements, or
-modifications.
+BESSY specifically disclaims any warranties, including, but not limited
+to, the implied warranties of merchantability, fitness for a particular
+purpose, and non-infringement.  This software is provided on an "as is"
+basis, and BESSY has no obligation to provide maintenance, support,
+updates, enhancements, or modifications.
 ________________________________________________________________________
 
-

Makefile

@@ -14,7 +14,10 @@
 TOP = .
 include $(TOP)/configure/CONFIG
 
-DIRS += config config/tools configure src
+ifeq ($(findstring YES,$(COMPAT_313) $(COMPAT_TOOLS_313)),YES)
+DIRS += config config/tools
+endif
+DIRS += configure src
 
 include $(TOP)/configure/RULES_TOP
 

README

@@ -2,9 +2,9 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright (c) 2002 The University of Chicago, as Operator
+Copyright (c) 1991-2003 The University of Chicago, as Operator
 of Argonne National Laboratory.
-Copyright (c) 2002 The Regents of the University of
+Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
 EPICS Base Versions 3.13.7 and higher are distributed

config/CONFIG.Host.Darwin

@@ -29,6 +29,7 @@ RANLIB = ranlib
 ANSI=GCC
 CPLUSPLUS=G++
 
+OP_SYS_CPPFLAGS += -DDarwin
 OP_SYS_CFLAGS += -no-cpp-precomp
 OP_SYS_INCLUDES = -I/sw/include -I/usr/X11R6/include
 OP_SYS_LDFLAGS += -L/sw/lib -L/usr/X11R6/lib
@@ -37,7 +38,7 @@ OP_SYS_LDFLAGS += -L/sw/lib -L/usr/X11R6/lib
 #ARCH_DEP_LDLIBS += -lreadline
 
 # Uncomment this if you're using the libtecla library
-ARCH_DEP_LDLIBS += -ltecla_r -ltermcap
+#ARCH_DEP_LDLIBS += -ltecla_r -ltermcap
 
 #
 # Compiler/linker problems prevent the use of shared libraries at the moment

config/CONFIG.Host.Linux

@@ -29,7 +29,7 @@ G++_SHRLIB_LDFLAGS_YES +=  -Wl,-soname,$@
 
 OP_SYS_CFLAGS += -D_BSD_SOURCE
 
-ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -mcpu=pentium
+ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
 ARCH_DEP_LDLIBS += -lpthread -lreadline -lcurses -lrt
 
 #Allows R3.13 built extensions to load R3.14 shared libs
@@ -47,4 +47,9 @@ SYS_DLL_LIBS_Linux += pthread readline curses rt
 #	and see if that makes the problem go away."
 #ARCH_DEP_CFLAGS += -D_GNU_SOURCE
 
+# Runtime ldflags
+RUNTIME_LIBS =$(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)\
+ $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH)
+RUNTIME_LDFLAGS = $(RUNTIME_LIBS:%=-Wl,-rpath,%)
+
 

config/CONFIG.Host.LynxOS

@@ -1,65 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
-#*************************************************************************
-# CONFIG.Host.LynxOS
-#
-#  This file is maintained by the EPICS community.
-#  Sites may override these definitions in CONFIG_SITE.Host.LynxOS
- 
-ARCH_CLASS = LynxOS
-
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
-
-AR = ar -rc
-ARCMD = $(AR) $@
-RANLIB = ranlib -t
-
-
-
-# Configure OS vendor C compiler
-ACC_ANSI = $(ACC) -ansi
-ACC_STRICT = $(ACC) -ansi -pedantic
-ACC_TRAD = $(ACC)
-ACC_WARN_YES = -Wall 
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES =
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES = 
-ACC_SHRLIB_LDFLAGS_YES =
-
-
-
-# Configure OS vendor C++ compiler
-CCC_NORMAL = $(CCC)
-CCC_STRICT = $(CCC)
-CCC_TEMPL_INST_FLAG = -pedantic -DEXPL_TEMP
-CCC_WARN_YES = -Wall
-CCC_WARN_NO = -w
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES = 
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -pedantic
-
-
-# added smh 6/5/98 : when building fdmgr - seems to use this not ACC
-# in effect this overides orig def in CONFIG_COMMON :
-# which is GCC_STRICT = $(GCC) -ansi -pedantic
-GCC_STRICT = $(GCC)
-G++_STRICT = $(G++) -Wtraditional -DEXPL_TEMP
-
-ARCH_DEP_CFLAGS = -DLynxOS -mposix -D_X86_ -DLYNXOS_RELEASE_2_4_0
-ARCH_DEP_LDLIBS = -lc -lbsd -lnsl -lm -lposix4d9 -llynx

config/CONFIG.Host.UnixCommon

@@ -83,7 +83,7 @@ OP_SYS_LDLIBS = -lm
 # Link definitions
 LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
 LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
- 
+
 #--------------------------------------------------
 # Allow site overrides
 -include $(EPICS_BASE)/config/CONFIG_SITE.Host.UnixCommon

config/CONFIG.Host.cygwin32

@@ -42,3 +42,9 @@ GCC_DEP_CFLAGS = -D_REENTRANT
 G++_DEP_CFLAGS = -D_REENTRANT
 
 POSIX_CPPFLAGS_YES = -D_POSIX_SOURCE
+
+# Runtime ldflags
+RUNTIME_LIBS =$(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)\
+ $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH)
+RUNTIME_LDFLAGS = $(RUNTIME_LIBS:%=-Wl,-rpath,%)
+

config/CONFIG.Host.hp700

@@ -14,76 +14,61 @@
 
 ARCH_CLASS = hpux
 
+SHARED_LIBRARIES=YES
+
 # Include definitions common to all Unix archs
 include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
 
 SHRLIB_SUFFIX = .sl
 
 AR = ar
+ARFLAGS = -rc
 
 # Configure OS vendor C compiler
 ACC = cc
 ACC_ANSI = $(ACC) -Aa
 ACC_STRICT = $(ACC) -Aa
-ACC_TRAD = $(ACC)
+ACC_TRAD = $(ACC) -Ac
 ACC_WARN_YES = 
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
-ACC_SFLAGS_YES= -Wl,-a,archive
-ACC_SFLAGS_NO=
+# Always keep libc shared to force using the one supplied with the
+# target machine (HP system and libc must match - important e.g. for
+# multi-CPU-systems)
+ACC_SLDFLAGS_YES= -Wl,-a,archive -l:libc.sl
+ACC_SFLAGS_NO =
 ACC_SLIBS_YES =
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES = +Z
+ACC_SLIBS_NO =
 ACC_SHRLIB_LDFLAGS_YES = -b
-ACC_DEP_CFLAGS=+DAportable
 
-# Configure OS vendor C++ compiler
-HPCC = cc 
-HPCC_ANSI = $(HPCC) -Aa
-HPCC_STRICT = $(HPCC) -Aa
-HPCC_TRAD = $(HPCC) -Ac
-HPCC_WARN_YES = 
-HPCC_WARN_NO =  -w
-HPCC_OPT_YES =  -O
-HPCC_OPT_NO = -g
-HPCC_SFLAGS_YES= -Wl,-a,archive
-HPCC_SFLAGS_NO=
-HPCC_SLIBS_YES =
-HPCC_SLIBS_NO=
-HPCC_SHRLIB_CFLAGS_YES = +Z
-HPCC_SHRLIB_LDFLAGS_YES = -b
-HPCC_DEP_CFLAGS=+DAportable
-
-#Old HP C++ compiler
-#CCC = CC
-#CCC_NORMAL = $(CCC) +p
-
-#New HP C++ compiler
+# aCC HP C++ compiler
 CCC = aCC
-# avoid treating "future errors" as actual errors
-CCC_NORMAL = $(CCC) +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
-CCC_STRICT = $(CCC) +p
+# Suppress bogus warnings created by the aCC compiler
+CCC_NORMAL = $(CCC) -AA -Aa -mt +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
+CCC_STRICT = $(CCC) -AA -Aa -mt
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO =
-CCC_OPT_YES =  -O
+CCC_OPT_YES = +O3
 CCC_OPT_NO = -g
-CCC_SFLAGS_YES= -Wl,-a,archive
+# Always keep libc shared to force using the one supplied with the
+# target machine (HP system and libc must match - important e.g. for
+# multi-CPU-systems)
+CCC_SLDFLAGS_YES= -Wl,-a,archive -l:libc.sl
 CCC_SFLAGS_NO=
 CCC_SLIBS_YES =
 CCC_SLIBS_NO=
-CCC_SHRLIB_CFLAGS_YES = +Z
-# shared libs will be found by searching environment variable SHLIB_PATH,
-# then by searching the specified path (see below)
 CCC_SHRLIB_LDFLAGS_YES = -b
 CCC_DEPENDS_FLAG = +m
-CCC_DEP_CFLAGS=+DAportable
 
-# +DAportable causes portable object code to be created for execution
-# on different PA-Risc machines
-ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX 
-ARCH_DEP_CXXFLAGS = -D_HPUX_SOURCE -DHP_UX
-ARCH_DEP_LDLIBS =
-ARCH_DEP_LDFLAGS = -Wl,+b$(DEFAULT_SHRLIB_SEARCH_PATH),+s
+# Portability across different PA-RISC architecture versions, position
+# independent code, "-mt" (s.a.) handles all the posix stuff
+ARCH_DEP_CPPFLAGS = -DHP_UX +DAportable +z
+ARCH_DEP_CFLAGS = -D_HPUX_SOURCE
 
+# Set runtime path for shared libraries
+empty:=                                      # trick from the make docs...
+space:= $(empty) $(empty)
+RUNTIME_LDFLAGS_YES = -Wl,+b$(subst $(space),:,$(sort $(SHRLIB_SEARCH_DIRS))),+s
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(SHARED_LIBRARIES))

config/CONFIG.Host.hpux-parisc-gnu

@@ -0,0 +1,49 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# CONFIG.Host.hpux-parisc-gnu
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.hpux-parisc-gnu
+
+ARCH_CLASS = hpux
+
+SHARED_LIBRARIES=YES
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar -rc
+ARCMD = $(AR) $@
+
+#==========================
+# These are overrides of ANSI and CPLUSPLUS values in CONFIG_SITE
+ANSI=GCC
+CPLUSPLUS=G++
+#==========================
+
+# Always keep libc shared to force using the one supplied with the
+# target machine (HP system and libc must match - important e.g. for
+# multi-CPU-systems)
+GCC_SLDFLAGS_YES = -l:libc.sl
+G++_SLDFLAGS_YES = -l:libc.sl
+
+# socket and nsl needed by libca.a
+#ARCH_DEP_LDLIBS += -lsocket -lnsl
+ARCH_DEP_LDLIBS += -lpthread
+ARCH_DEP_CPPFLAGS += -D_PTHREADS -DOSITHREAD_USE_DEFAULT_STACK
+
+# Allows R3.13 built extensions to load R3.14 shared libs
+SYS_DLL_LIBS_hpux += pthread
+
+# Set runtime path for shared libraries
+empty:=                                      # trick from the make docs...
+space:= $(empty) $(empty)
+RUNTIME_LDFLAGS_YES = -Wl,+b$(subst $(space),:,$(sort $(SHRLIB_SEARCH_DIRS))),+s
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(SHARED_LIBRARIES))

config/CONFIG.Host.solaris

@@ -35,23 +35,23 @@ ACC = $(SPARCWORKS)/bin/cc
 ACC_ANSI = $(ACC) -Xa -v
 ACC_STRICT = $(ACC) -Xc -v
 ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC
+ACC_DEP_CFLAGS = -KPIC -D_REENTRANT
 ACC_WARN_YES = 
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
 ACC_SFLAGS_YES= -Bstatic
 ACC_SFLAGS_NO=
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 ACC_SLIBS_NO=
 ACC_SHRLIB_CFLAGS_YES =
-ACC_SHRLIB_LDFLAGS_YES =  -G -h $@ -z ignore -z combreloc -z lazyload
+ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
 
 # Configure OS vendor C++ compiler
 CCC = $(SPARCWORKS)/bin/CC
 CCC_NORMAL = $(CCC) +p
 CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC
+CCC_DEP_CFLAGS = -KPIC -D_REENTRANT
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO = 
@@ -59,22 +59,34 @@ CCC_OPT_YES =  -O
 CCC_OPT_NO = -g
 CCC_SFLAGS_YES= -Bstatic
 CCC_SFLAGS_NO=
-CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 CCC_SLIBS_NO=
 CCC_DEPENDS_FLAG = -xM1
 CCC_SHRLIB_CFLAGS_YES =
-CCC_SHRLIB_LDFLAGS_YES =  -G -h $@ -z ignore -z combreloc -z lazyload
- 
+CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
+
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
-POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
+POSIX_CPPFLAGS_YES += -D__EXTENSIONS__ -mt
+
+ARCH_DEP_LDFLAGS += -mt
 
 # socket and nsl needed by libca.a
 ARCH_DEP_LDLIBS += -lsocket -lnsl
 ARCH_DEP_LDLIBS += -lposix4 -lpthread
 ARCH_DEP_LDLIBS_8 = -lCrun
+ARCH_DEP_LDLIBS_9 = -lCrun
 ARCH_DEP_LDLIBS += $(ARCH_DEP_LDLIBS_$(SOLARIS_VERSION))
 
 #Allows R3.13 built extensions to load R3.14 shared libs
 SYS_DLL_LIBS_solaris_8 = Crun
+SYS_DLL_LIBS_solaris_9 = Crun
 SYS_DLL_LIBS_solaris += posix4 pthread $(SYS_DLL_LIBS_solaris_$(SOLARIS_VERSION))
+
+# Runtime ldflags
+RUNTIME_LDFLAGS =$(addprefix -R,$(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)\
+ $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH))
+
+OP_SYS_LDFLAGS =  -z ignore -z combreloc -z lazyload
+
+

config/CONFIG.Host.solaris-sparc-debug

@@ -7,12 +7,8 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#  CONFIG_HOST_ARCH.LynxOS
-#
-# Override values in CONFIG.LynxOS
+# $Id$
 
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
-
-WIND_HOST_TYPE = LynxOS
+# solaris-sparc is the new name for solaris
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
 

config/CONFIG.Host.solaris-sparc-staticlib

@@ -7,24 +7,8 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-TOP=../../..
-include $(TOP)/configure/CONFIG
+# $Id$
 
-INC += camacLib.h
-INC += fast_lock.h
-INC += drvTS.h
-INC += devLib.h
-INC += epicsDynLink.h
-INC += module_types.h
-INC += task_params.h
+# solaris-sparc is the new name for solaris
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
 
-SRCS += drvTS.c
-SRCS += devLib.c
-SRCS += devLibVxWorks.c
-SRCS += veclist.c
-SRCS += epicsDynLink.c
-
-OBJLIB_vxWorks += vxCom
-OBJLIB_SRCS = $(SRCS)
-
-include $(TOP)/configure/RULES

config/CONFIG.Host.solarisGnu

@@ -37,12 +37,21 @@ SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
 POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
 
+ARCH_DEP_LDFLAGS += -mt
+
 # socket and nsl needed by libca.a
 ARCH_DEP_LDLIBS += -lsocket -lnsl
 ARCH_DEP_LDLIBS += -lposix4 -lpthread
 ARCH_DEP_LDLIBS_8 = -lCrun
+ARCH_DEP_LDLIBS_9 = -lCrun
 ARCH_DEP_LDLIBS += $(ARCH_DEP_LDLIBS_$(SOLARIS_VERSION))
 
 #Allows R3.13 built extensions to load R3.14 shared libs
 SYS_DLL_LIBS_solaris_8 = Crun
+SYS_DLL_LIBS_solaris_9 = Crun
 SYS_DLL_LIBS_solaris += posix4 pthread $(SYS_DLL_LIBS_solaris_$(SOLARIS_VERSION))
+
+# Runtime ldflags
+RUNTIME_LDFLAGS =$(addprefix -R,$(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)\
+ $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH))
+

config/CONFIG.Host.sun4

@@ -93,3 +93,6 @@ ARCH_DEP_CFLAGS = -DSUNOS4
 #SPECIAL_LANG = /usr/lang/SC3.0.1
 #SPECIAL_LANG = /usr/lang/lib
 
+# Runtime ldflags
+RUNTIME_LDFLAGS =$(addprefix -R,$(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)\
+ $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH))

config/CONFIG.LynxOS

@@ -1,142 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
-#*************************************************************************
-# $Id$
-#
-# This file contains definitions for Vx builds
-
-#--------------------------------------------------
-# operating system class (include/os/<os_class>)
-OS_CLASS = LynxOS
-
-lynx_pc486 =YES
-
-CC = gcc
-CXX = g++
-
-#--------------------------------------------------
-# vxWorks directory definitions
-
-# The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
-# can be overridden for specific host architectures
-# by creating a CONFIG_SITE.Vx.<host_arch> file with
-# the override definitions.
- 
-# Tornado directory definitions
-VX_INCLUDE_YES =
-VX_GNU_YES =
-VX_GNU_BIN_YES =
-VX_GNU_LIB_YES =
-
-
-# pre Torando directory definitions
-VX_INCLUDE_NO =
-VX_GNU_NO =
-VX_GNU_BIN_NO =
- 
-# directory definitions
-VX_DIR =
-VX_INCLUDE =
-VX_GNU = 
-
-GNU_BIN = /usr/local/bin
-GNU_LIB = /usr/local/lib
-
-#--------------------------------------------------
-# VxWorks command definitions
-
-#GCC = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
-#AR = $(GNU_BIN)/ar$(CMPLR_SUFFIX)
-#CPP = $(GNU_BIN)/cpp$(CMPLR_SUFFIX) -nostdinc
-#RANLIB = $(GNU_BIN)/ranlib$(CMPLR_SUFFIX)
-#LD = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
-
-AR = ar -rc
-ARCMD = $(AR) $@
-RANLIB = ranlib -t
-GCC = gcc 
-CPP = cpp
-LD = ld -r
-
-
-#--------------------------------------------------
-# Tornado C++ crosscompiler definitions
-
-#CPLUSPLUS_YES = G++
-#G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
-#LD_G++ = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
-#NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)
-#MUNCH = $(GNU_BIN)/munch
-
-CPLUSPLUS_YES = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
-G++ = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
-LD_G++ = ld -r
-NM = nm
-
-#--------------------------------------------------
-# Pre Tornado C++ crosscompiler definitions
-# These are pre tornado definitions for Hideos builds (defined for 68k only)
-
-#CPLUSPLUS_NO = CCC
-#CCC = $(GNU_DIR)/bin/sun3-g++ -B$(GNU_DIR)/lib/gcc-lib/ -nostdinc -DEXPL_TEMPL
-#LD_CCC = $(GNU_DIR)/bin/sun3-ld $(OLD_ARCH_DEP_LDFLAGS) -r
-
-CPLUSPLUS_NO = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
-CCC = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
-LD_CCC = ld -r
-
-CCC_NORMAL = $(CCC) $(OLD_ARCH_DEP_CFLAGS)
-CCC_STRICT = $(CCC) -ansi -pedantic -Wall -traditional $(OLD_ARCH_DEP_CFLAGS)
-CCC_TRAD = $(CCC) -traditional $(OLD_ARCH_DEP_CFLAGS)
-CCC_TEMPL_INST_FLAG = -DEXPL_TEMP
-CCC_WARN_YES = -Wall
-CCC_WARN_NO = -w
-CCC_OPT_YES = -O
-CCC_OPT_NO = -g
-CCC_DEPENDS_FLAG =  -pedantic -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
-CPU = i486
-OS = lynxos
-OLD_ARCH_DEP_CFLAGS = -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
-#	 --no-builtin -Wa,"-m68040" -DOS_EQ_$(OS) \
-#	-DBOARD_EQ_$(BOARD) -DCPU_EQ_$(CPU) -DBOARD=$(BOARD)
-OLD_ARCH_DEP_LDFLAGS = -mposix -lc -lbsd -lnsl -lm -lposix4d9 -llynx
-#	 -Ur -N -T$(EPICS_BASE_BIN)/vxldscript.MRI
-
-#--------------------------------------------------
-# C compiler definitions  
-ANSI = gcc -ansi
-
-#--------------------------------------------------
-# Command definitions
-CPLUSPLUS = g++
-#	 $(CPLUSPLUS_$(TORNADO))
-LD_CXX = ld -r
-#	 $(LD_$(CPLUSPLUS))
-
-#--------------------------------------------------
-# Operating system flags
-OP_SYS_INCLUDES =
-#	 -I$(VX_INCLUDE)
-OP_SYS_CFLAGS =  -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
-#		-DvxWorks -DV5_vxWorks -fno-builtin 
-OP_SYS_LDFLAGS = -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
-OP_SYS_LDLIBS = -lc -lbsd -lnsl -lm -lposix4d9 -llynx
-
-#--------------------------------------------------
-# Optimization flag overrides
-GCC_OPT_YES = -O	
-#	2 -fstrength-reduce
-G++_OPT_YES = -O
-#	2 -fstrength-reduce
-
-#--------------------------------------------------
-# Link definitions
-LINK.c = $(LD) $(LDFLAGS) -o
-LINK.cc = $(LD_CXX) $(LDFLAGS) -o
-

config/CONFIG.Vx

@@ -20,7 +20,7 @@ OS_CLASS = vxWorks
 
 # The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
 # can be overridden for specific host architectures
-# by creating a CONFIG_SITE.Vx.<host_archfile with
+# by creating a CONFIG_SITE.Vx.<host_arch> file with
 # the override definitions.
 
 # Tornado directory definitions
@@ -41,7 +41,6 @@ VX_GNU = $(VX_GNU_$(TORNADO))
 GNU_BIN = $(VX_GNU_BIN_$(TORNADO))
 GNU_LIB = $(VX_GNU_LIB_$(TORNADO))
 export GCC_EXEC_PREFIX = $(GNU_LIB)/gcc-lib/
-export WIND_BASE = $(VX_DIR)
 
 #--------------------------------------------------
 # VxWorks command definitions
@@ -148,4 +147,3 @@ MUNCHNAME = $(LIBNAME:%=%$(MUNCH_SUFFIX))
 export WIND_BASE = $(VX_DIR)
 export WIND_HOST_TYPE
 
-

config/CONFIG.Vx.vxWorks-ppc603_long

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# vxWorks-ppc603 is the new R3.14 name for ppc603
+include $(EPICS_BASE)/config/CONFIG.Vx.ppc603_long

config/CONFIG.Vx.vxWorks-ppc604_long

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# vxWorks-ppc604 is the new R3.14 name for ppc604
+include $(EPICS_BASE)/config/CONFIG.Vx.ppc604_long

config/CONFIG_BASE_VERSION

@@ -10,24 +10,6 @@
 #
 #  $Id$
 #
-#  EPICS Version information
-#
-# This file is interpreted by the Bourne Shell (MakeRelease), so spaces are
-# not allowed around the '=' signs or in unquoted values.
-#
+#  EPICS Version information now comes from configure...
 
-EPICS_VERSION=3
-EPICS_REVISION=14
-EPICS_MODIFICATION=1
-EPICS_UPDATE_NAME=
-EPICS_UPDATE_LEVEL=0
-
-EPICS_LOCAL_NAME=B
-EPICS_LOCAL_VERSION=0
-
-EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}.$(EPICS_LOCAL_NAME)$(EPICS_LOCAL_VERSION)"
-
-CVS_DATE="\$$Date$$"
-CVS_TAG="\$$Name$$"
-
-BASE_3_14=YES
+include $(EPICS_BASE)/configure/CONFIG_BASE_VERSION

config/CONFIG_COMMON

@@ -42,6 +42,7 @@ INSTALL_CONFIG              = $(INSTALL_LOCATION)/config
 INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
 
 EPICS_BASE_INCLUDE      = $(EPICS_BASE)/include
+EPICS_BASE_TOOLS        = $(EPICS_BASE)/config/tools
 
 DIVIDER = .
 OBJ = .
@@ -63,7 +64,7 @@ LEX   = $(ELEX)
 PERL=perl
 
 # install from EPICS
-INSTALL = $(PERL) $(EPICS_BASE_HOST_BIN)/installEpics.pl
+INSTALL = $(PERL) $(EPICS_BASE_TOOLS)/installEpics.pl
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
@@ -86,10 +87,10 @@ EPICS_BASE_BIN          = $(EPICS_BASE)/bin/$(T_A)
 
 GCC_ANSI = $(GCC) -ansi
 GCC_STRICT = $(GCC) -ansi -pedantic
-GCC_TRAD = $(GCC) -traditional
+GCC_TRAD = $(GCC)
 GCC_DEP_CFLAGS = -fPIC -D_REENTRANT
 
-GCC_WARN_YES = -Wall
+GCC_WARN_YES = -Wall -Wtraditional -Wmissing-prototypes -Wstrict-prototypes
 GCC_WARN_NO = -w
 GCC_OPT_YES = -O3
 GCC_OPT_NO = -g
@@ -101,13 +102,13 @@ GCC_SHRLIB_CFLAGS_YES =
 GCC_SHRLIB_LDFLAGS_YES =  -shared
 
 G++_NORMAL = $(G++) -ansi -pedantic
-G++_STRICT = $(G++) -ansi -pedantic -Wtraditional
-G++_TRAD = $(G++) -traditional
+G++_STRICT = $(G++) -ansi -pedantic
+G++_TRAD = $(G++)
 G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
 G++_DEP_CFLAGS = -fPIC -D_REENTRANT
 G++_WARN_YES = -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion\
       -Wpointer-arith -Winline
 G++_WARN_NO = -w
 G++_OPT_YES = -O3
@@ -238,10 +239,10 @@ CXXFLAGS = $(OPT_CXXFLAGS) $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)
  $(OP_SYS_CFLAGS) $(TEMPL_INST_CXXFLAG) $(INCLUDES)
 
 LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS)\
- $(ARCH_DEP_LDFLAGS) $(STATIC_LDFLAGS) $(OP_SYS_LDFLAGS)
+ $(ARCH_DEP_LDFLAGS) $(STATIC_LDFLAGS) $(OP_SYS_LDFLAGS) $(RUNTIME_LDFLAGS)
 
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS)\
- $(STATIC_LDLIBS) $(OP_SYS_LDLIBS) $(POSIX_LDLIBS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(STATIC_LDLIBS) $(ARCH_DEP_LDLIBS)\
+  $(OP_SYS_LDLIBS) $(POSIX_LDLIBS)
 
 CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(POSIX_CPPFLAGS)
 

config/CONFIG_COMPAT

@@ -15,6 +15,9 @@
 #Syntax:
 # ARCH_<host_arch> = <epics_host_arch>
 ARCH_solarisGnu = solaris-sparc-gnu
+ARCH_solarisNonshared = solaris-sparc-nonshared
+#ARCH_solaris = solaris-sparc-static
+#ARCH_solaris = solaris-sparc-debug
 ARCH_solaris = solaris-sparc
 ARCH_sun4 = sun4-sparc
 ARCH_Linux = linux-x86
@@ -22,7 +25,7 @@ ARCH_WIN32 = win32-x86
 ARCH_hp700 = hpux-m68k
 ARCH_alpha = osf-alpha
 ARCH_Borland = win32-x86-borland
-ARCH_cygwin32 = win32-x86-cygwin
+ARCH_cygwin32 = cygwin-x86
 
 ifndef EPICS_HOST_ARCH
 ifdef HOST_ARCH
@@ -44,4 +47,3 @@ HOST_ARCH := $(EPICS_HOST_ARCH)
 # and change ARCH_solaris=solaris-<arch> to ARCH_solaris=solaris-<arch>-gnu
 # in base/config/CONFIG_COMPAT.
 
-

config/CONFIG_HOST_ARCH.Borland

@@ -13,12 +13,12 @@
 EXE=.exe
 HOSTEXE=.exe
 
-CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
-MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
-RM   =$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -f
-MKDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/mkdir.pl
-RMDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -rf
-FN   =$(PERL) $(EPICS_BASE_HOST_BIN)/fullName.pl
+CP   =$(PERL) $(EPICS_BASE_TOOLS)/cp.pl
+MV   =$(PERL) $(EPICS_BASE_TOOLS)/mv.pl
+RM   =$(PERL) $(EPICS_BASE_TOOLS)/rm.pl -f
+MKDIR=$(PERL) $(EPICS_BASE_TOOLS)/mkdir.pl
+RMDIR=$(PERL) $(EPICS_BASE_TOOLS)/rm.pl -rf
+FN   =$(PERL) $(EPICS_BASE_TOOLS)/fullName.pl
 CHMOD=echo
 ECHO=echo
 

config/CONFIG_HOST_ARCH.UnixCommon

@@ -25,5 +25,3 @@ export LD_LIBRARY_PATH := $(INSTALL_HOST_LIB):$(EPICS_BASE_HOST_LIB):$(LD_LIBRAR
 else
 export LD_LIBRARY_PATH := $(EPICS_BASE_HOST_LIB):$(LD_LIBRARY_PATH)
 endif
-
-

config/CONFIG_HOST_ARCH.WIN32

@@ -13,11 +13,11 @@
 EXE=.exe
 HOSTEXE=.exe
 
-CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
-MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
-RM   =$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -f
-MKDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/mkdir.pl
-RMDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -rf
+CP   =$(PERL) $(EPICS_BASE_TOOLS)/cp.pl
+MV   =$(PERL) $(EPICS_BASE_TOOLS)/mv.pl
+RM   =$(PERL) $(EPICS_BASE_TOOLS)/rm.pl -f
+MKDIR=$(PERL) $(EPICS_BASE_TOOLS)/mkdir.pl
+RMDIR=$(PERL) $(EPICS_BASE_TOOLS)/rm.pl -rf
 CHMOD=echo
 ECHO=echo
 

config/CONFIG_HOST_ARCH.hpux-parisc-gnu

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# hpux-parisc is the new name for hp700
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.hp700

config/CONFIG_HOST_ARCH.solaris-sparc-debug

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#  $Id$
+
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
+

config/CONFIG_HOST_ARCH.solaris-sparc-gnu

@@ -9,5 +9,5 @@
 #*************************************************************************
 #  $Id$
 
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solarisGnu
 

config/CONFIG_HOST_ARCH.solaris-sparc-staticlib

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#  $Id$
+
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
+

config/CONFIG_HOST_ARCH.solaris-x86-gnu

@@ -1,4 +1,4 @@
 #  $Id$
 
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solarisGnu
 

config/CONFIG_HOST_ARCH.solarisGnu

@@ -1,4 +1,4 @@
-#  CONFIG_HOST_ARCH.solaris
+#  CONFIG_HOST_ARCH.solarisGnu
 #
 # Override values in CONFIG.Vx
 

config/CONFIG_SITE

@@ -24,6 +24,7 @@
 #	solarisGnu  (GNU compiler)
 #	solaris-x86
 #	sun4
+
 #
 #  HOST_ARCH now an environment variable
 #  HOST_ARCH=$(shell /usr/local/epics/startup/HostArch)
@@ -31,29 +32,18 @@ ifndef HOST_ARCH
 	HOST_ARCH=unsupported
 endif
 
-#  The architectures to build EPICS for
+#  The R3.14 architectures to build EPICS for
 #
 #  Currently Supporting:
-#       frc40
-#       frc5ce
-#       hkbaja47
-#       hkv2f
-#       mv147
-#       mv1604
-#       mv162
-#       mv162lc
-#       mv167
-#       mv177
-#       mv2700
-#       niCpu030
-#       pc486
-#       ppc603
-#       ppc604
-#       ppc603_long (over 32MB)
-#       ppc604_long (over 32MB)
-#       sbs_pc6
-#       vxipc
-#
+#       vxWorks-486
+#       vxWorks-68040
+#       vxWorks-68040lc
+#       vxWorks-68060
+#       vxWorks-ppc603
+#       vxWorks-ppc604
+#       vxWorks-ppc603_long
+#       vxWorks-ppc604_long
+
 CROSS_COMPILER_TARGET_ARCHS=
 
 

config/CONFIG_SITE.Host.LynxOS

@@ -1,15 +0,0 @@
-#
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# APS overrides of definitions 
-
-GCC = gcc
-G++ = g++
-CC = gcc
-CCC = g++
-ACC = gcc
-PLUSPLUS = g++
-CXX = g++

config/CONFIG_SITE.Host.hp700

@@ -4,23 +4,8 @@
 # Site Specific Configuration Information
 # Only the local epics system manager should modify this file
 
-# by default, build and use shared libraries
-SHARED_LIBRARIES=YES
-
-# where we expect to find shared libraries if not found elsewhere
-# DEFAULT_SHRLIB_SEARCH_PATH = /home/controls/epics/cdev/lib/hpux-10.20:/home/controls/epics/cdev/lib/hpux-10.XX:/opt/TclTk/lib:/opt/xpm/lib/X11:/usr/lib/pa1.1:/usr/lib:/lib:/opt/csr/installed/HP-UX/lib::/opt/OPI/GUI/lib/hp700:/opt/OPI/MapperApplications/lib/hp700:/opt/OPI/cdevAppl/lib/hp700:/opt/OPI/cmlog/lib/hp700:/opt/OPI/models/lib/hp700:/opt/OPI/sddsAppl/lib/hp700
-DEFAULT_SHRLIB_SEARCH_PATH = /cs/lib/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION).$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL):$(INSTALL_LIB)
-
-#No special action should be required to build or use shared libraries.
-#However, when a new shared library is built using the above configuration,
-#it should be copied into the location specified by DEFAULT_SHRLIB_SEARCH_PATH
-#which in this specific case is: /cs/lib/R3.13.1.1/
-
-# cal added this so that libraries can be built with position
-# independent code even if shared libraries aren't being built
-ifeq ($(RELOCATABLE), YES)
-    ARCH_DEP_CFLAGS     += +Z
-    ARCH_DEP_CXXFLAGS   += +Z
-endif
-
+# By default, shared libraries are built and used. Override here.
+#SHARED_LIBRARIES=NO
 
+# This is the absolute path to the generic INSTALL_LOCATION, for SHARED_LIBRARY searches.
+SHRLIB_SEARCH_DIRS += /opt/epics/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)/support/base/$(EPICS_VERSION)-$(EPICS_REVISION)-$(EPICS_MODIFICATION)-$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL)/lib/$(EPICS_HOST_ARCH)

config/CONFIG_SITE.Host.hpux-parisc-gnu

@@ -0,0 +1,11 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# By default, shared libraries are built and used. Override here.
+#SHARED_LIBRARIES=NO
+
+# This is the absolute path to the generic INSTALL_LOCATION, for SHARED_LIBRARY searches.
+SHRLIB_SEARCH_DIRS += /opt/epics/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)/support/base/$(EPICS_VERSION)-$(EPICS_REVISION)-$(EPICS_MODIFICATION)-$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL)/lib/$(EPICS_HOST_ARCH)

config/CONFIG_SITE.Host.solaris

@@ -6,6 +6,6 @@
 
 # APS overrides of definitions 
 
-GCC = /opt/gnu/bin/gcc
-G++ = /opt/gnu/bin/g++
+#GCC = /opt/gnu/bin/gcc
+#G++ = /opt/gnu/bin/g++
 

config/CONFIG_SITE.Host.solaris-sparc-debug

@@ -0,0 +1,4 @@
+# $Id$
+
+# solaris-sparc is the new name for solaris
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.solaris

config/CONFIG_SITE.Host.solaris-sparc-staticlib

@@ -0,0 +1,4 @@
+# $Id$
+
+# solaris-sparc is the new name for solaris
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.solaris

config/Makefile

@@ -15,10 +15,12 @@ TOP=..
 
 include $(TOP)/configure/CONFIG
 
+ifeq ($(findstring YES,$(COMPAT_313) $(COMPAT_TOOLS_313)),YES)
 INSTALL_CONFIG = $(INSTALL_LOCATION)/config
 
 CONFIGS += $(subst ../,,$(wildcard ../CONFIG*))
 CONFIGS += $(subst ../,,$(wildcard ../RULES*))
+endif
 
 include $(TOP)/configure/RULES
 

config/RULES.Db

@@ -204,7 +204,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo "Expanding dbd"
 	@$(RM) $@
-	$(DBEXPAND) $(DBDFLAGS) $< > $@
+	$(DBEXPAND) $(DBDFLAGS) -o $@ $<
 endif
 
 ##################################################### Dependencies

config/RULES.Host

@@ -463,10 +463,12 @@ endif  #ifdef PROD
 #     Java classes and packages
 #
 
+ifdef JAVA
 DIRECTORY_TARGETS += $(INSTALL_JAVA)
 ifdef PACKAGE
 DIRECTORY_TARGETS += $(INSTALL_JAVA)/$(PACKAGE)
 endif
+endif
 
 vpath %.class $(INSTALL_JAVA)/$(PACKAGE)
 
@@ -648,8 +650,8 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c:	%.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	ln -s $< $*.st
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
 	@$(RM) $*.st
@@ -722,7 +724,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) -o $@ $<
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd
@@ -782,8 +784,8 @@ $(INSTALL_SHRLIB)/lib%: lib%
 	@echo "Installing library $@"
 	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
 ifdef SHRLIB_VERSION
-	@$(RM) $(@:%.$(SHRLIB_VERSION)=%)
-	ln -s $< $(@:%.$(SHRLIB_VERSION)=%) 
+	$(RM) $(subst .$(SHRLIB_VERSION),,$@)
+	ln -s $< $(subst .$(SHRLIB_VERSION),,$@)
 endif # SHRLIB_VERSION
 
 $(INSTALL_TCLLIB)/%: %

config/RULES.Unix

@@ -148,8 +148,8 @@ $(TARGETS) $(PROD): $(DEPLIBS)
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
 
@@ -221,7 +221,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE_HOST_BIN)/dbExpand $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand $(DBDFLAGS) -o $@ $<
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd

config/RULES.Vx

@@ -93,7 +93,7 @@ endif
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *.o *.a *.out $(TARGETS) $(PROD) $(LIBNAME) $(INC) \
-	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME)
+	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME) *.c 
 ifdef MUNCH
 	@$(RM) $(MUNCHNAME) ctdt.c ctdt.o nm.out
 endif
@@ -129,7 +129,7 @@ endif
 %.out : %.o
 	@ $(RM) ctct.o ctdt.c nm.out
 	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
+	$(PERL) $(EPICS_BASE_TOOLS)/munch.pl < nm.out > ctdt.c
 	$(COMPILE.c) -traditional ctdt.c
 	$(LINK.cc) $@ $< ctdt.o
 
@@ -137,7 +137,7 @@ endif
 $(MUNCHNAME):%.munch : %
 	@ $(RM) ctct.o ctdt.c nm.out
 	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
+	$(PERL) $(EPICS_BASE_TOOLS)/munch.pl < nm.out > ctdt.c
 	$(COMPILE.c) -traditional ctdt.c
 	$(LINK.cc) $@ $(LDFLAGS) $< ctdt.o
 
@@ -171,8 +171,8 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	ln -s $< $*.st
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
 	@$(RM) $*.st
@@ -248,7 +248,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) -o $@ $<
 endif
 
 $(LIBNAME): $(LIBOBJS)

config/RULES_ARCHS

@@ -22,7 +22,6 @@ ACTIONS += install
 ACTIONS += buildInstall 
 ACTIONS += depends 
 ACTIONS += rebuild 
-ACTIONS += browse 
 
 actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))
@@ -61,11 +60,11 @@ $(crossActionArchTargets) :
 $(crossArchs) : 
 endif
 
-$(hostDirs) : 
-	$(PERL) $(EPICS_BASE_HOST_BIN)/makeMakefile.pl $@ Host
+$(hostDirs) : $(EPICS_BASE_TOOLS)/makeMakefile.pl
+	$(PERL) $(EPICS_BASE_TOOLS)/makeMakefile.pl $@ Host
 
-$(crossDirs) : 
-	$(PERL) $(EPICS_BASE_HOST_BIN)/makeMakefile.pl $@ Vx
+$(crossDirs) : $(EPICS_BASE_TOOLS)/makeMakefile.pl
+	$(PERL) $(EPICS_BASE_TOOLS)/makeMakefile.pl $@ Vx
 
 #
 # host/cross action targets

config/tools/Makefile

@@ -15,8 +15,10 @@ TOP=../..
 
 include $(TOP)/configure/CONFIG
 
+ifeq ($(findstring YES,$(COMPAT_313) $(COMPAT_TOOLS_313)),YES)
 SCRIPTS_HOST += $(subst ../,,$(wildcard ../*.pl)) 
 SCRIPTS_HOST += installEpics
+endif
 
 include $(TOP)/configure/RULES
 

config/tools/installEpics.pl

@@ -104,7 +104,7 @@ sub Usage
 	print "Usage:\n";
 	print "\t$tool [ -m mode ] file ... directory\n";
 	print "\n";
-	print "\t-d             Create non-exising directories\n";
+	print "\t-d             Create non-existing directories\n";
 	print "\t-m mode        Set the mode for the installed file";
 		print " (0755 by default)\n";
 	print "\tfile           Name of file\n";

configure/CONFIG

@@ -17,14 +17,16 @@
 #  Common build definitions
 #
 
-ifndef CONFIG
-CONFIG = $(TOP)/configure
-endif
+CONFIG ?= $(TOP)/configure
 
 -include $(CONFIG)/os/CONFIG_COMPAT
 
 -include $(CONFIG)/RELEASE
 -include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH)
+ifdef T_A
+-include $(CONFIG)/RELEASE.Common.$(T_A)
+-include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
 
 include $(CONFIG)/CONFIG_COMMON
 
@@ -41,7 +43,7 @@ include $(CONFIG)/CONFIG_SITE
 #
 include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).Common
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-
+-include $(CONFIG)/O.$(T_A)/CONFIG_APP_INCLUDE
 
 ifdef T_A
 
@@ -68,21 +70,11 @@ endif
 
 #  User specific definitions
 #
--include $(HOME)/configure/CONFIG
--include $(HOME)/os/configure/CONFIG.Host.$(HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.Host.$(EPICS_HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.$(HOST_ARCH).Common
--include $(HOME)/os/configure/CONFIG.$(EPICS_HOST_ARCH).Common
+-include $(HOME)/configure/CONFIG_USER
+-include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH)
 ifdef T_A
--include $(HOME)/configure/CONFIG.$(OS_CLASS)
--include $(HOME)/configure/CONFIG.Target.$(T_A)
--include $(HOME)/configure/CONFIG.Common.$(T_A)
--include $(HOME)/configure/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.Target.$(T_A)
--include $(HOME)/configure/os/CONFIG.Common.$(T_A)
--include $(HOME)/configure/os/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
+-include $(HOME)/configure/CONFIG_USER.Common.$(T_A)
+-include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH).$(T_A)
 endif
 
 #  All options

configure/CONFIG.CrossCommon

@@ -26,6 +26,9 @@ export GCC_EXEC_PREFIX = $(GNU_LIB)/gcc-lib/
 CROSS_INCLUDES = $(addprefix -I,$(GNU_TARGET_INCLUDE_DIR))
 CROSS_LDFLAGS = $(addprefix -L,$(GNU_TARGET_LIB_DIR))
 
+CMPLR_PREFIX_CROSS=$(addsuffix -,$(GNU_TARGET))
+CMPLR_PREFIX=$(CMPLR_PREFIX_$(BUILD_CLASSS))
+
 # All cross builds use the gnu compiler
 include $(CONFIG)/CONFIG.gnuCommon
 

configure/CONFIG.gnuCommon

@@ -15,34 +15,40 @@ GNU = YES
 GNU_BIN = $(GNU_DIR)/bin
 GNU_LIB = $(GNU_DIR)/lib
 
-CC = $(GNU_BIN)/$(CMPLR_PREFIX)cc$(CMPLR_SUFFIX)
-CCC = $(GNU_BIN)/$(CMPLR_PREFIX)cc$(CMPLR_SUFFIX)
+CC = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX)
+CCC = $(GNU_BIN)/$(CMPLR_PREFIX)g++$(CMPLR_SUFFIX)
 AR = $(GNU_BIN)/$(CMPLR_PREFIX)ar$(CMPLR_SUFFIX) -rc
 LD = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
 CPP = $(CC) -x c -E
 RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
 
-CODE_CFLAGS = -fPIC
 CONFORM_CFLAGS_ANSI = -ansi
-CONFORM_CFLAGS_STRICT = -ansi -pedantic
+CONFORM_CFLAGS_STRICT = -ansi
 CONFORM_CFLAGS_TRAD = -traditional
+PROF_CFLAGS_YES = -p
+GPROF_CFLAGS_YES = -pg
+CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
 WARN_CFLAGS_YES = -Wall
 WARN_CFLAGS_NO = -w
 OPT_CFLAGS_YES = -O3
 OPT_CFLAGS_NO = -g
 
-CODE_CXXFLAGS = -fPIC 
-CONFORM_CXXFLAGS_NORMAL = -ansi -pedantic
-CONFORM_CXXFLAGS_STRICT = -ansi -pedantic
-#WARN_CXXFLAGS_YES = -Wall -Weffc++
+CONFORM_CXXFLAGS_NORMAL = -ansi
+CONFORM_CXXFLAGS_STRICT = -ansi
+PROF_CXXFLAGS_YES = -p
+GPROF_CXXFLAGS_YES = -pg
+CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
 OPT_CXXFLAGS_YES = -O3
 OPT_CXXFLAGS_NO = -g
 
+CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
+
 STATIC_LDFLAGS_YES = -static
 STATIC_LDFLAGS_NO =
 
-SHRLIB_LDFLAGS_YES +=  -shared
-SHRLIB_LDFLAGS_NO +=
+SHRLIB_CFLAGS = -fPIC
+
+GNU_LDLIBS_YES = -lgcc
 

configure/CONFIG_ADDONS

@@ -23,6 +23,60 @@
 #		USR_CFLAGS_sun4 = -nil-
 #		USR_CFLAGS_DEFAULT = <defines for most systems, not sun4>
 #
+#    These rules apply to these Makefile-variables:
+#    USR_CFLAGS    C flags
+#    USR_CXXFLAGS  C++ flags
+#    USR_CPPFLAGS  c preprocesser flags
+#    INC           include-files to install
+#    SRCS          source files for building libraries and prods
+#    USR_SRCS      source files for building libraries and prods
+#    PROD_SRCS     source files for building prods
+#    LIB_SRCS      source files for building libraries
+#    LIBSRCS       source files for building libraries (deprecated)
+#    PROD_OBJS     object files for building prods
+#    LIB_OBJS      object files for building libraries
+#    USR_LIBS      libs needed by PROD and TESTPROD and LIBRARY
+#    PROD_LIBS     libs needed by PROD and TESTPROD
+#    LIB_LIBS      libs needed by shared LIBRARY
+#    SHRLIB_LIBS   libs needed by shared LIBRARY
+#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
+#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
+#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
+#    USR_SYS_LIBS  system libs needed building libraries and prods
+#    PROD_SYS_LIBS system libs needed for building prods
+#    LIB_SYS_LIBS  system libs needed for building libraries
+#    USR_LDFLAGS   ld flags for building libraries and prods
+#    PROD_LDFLAGS  ld flags for building prods
+#    LIB_LDFLAGS   ld flags for building libraries
+#    PROD          products to build and install
+#    PROD_HOST     products to build and install
+#    PROD_IOC      products to build and install
+#    TESTPROD      products to build and install
+#    TESTPROD_HOST products to build and install
+#    TESTPROD_IOC  products to build and install
+#    LIBRARY       products to build and install
+#    LIBRARY_HOST  products to build and install
+#    LIBRARY_IOC   products to build and install
+#    LOADABLE_LIBRARY        module to build and install
+#    LOADABLE_LIBRARY_HOST   module to build and install
+#    SCRIPTS       scripts and install
+#    SCRIPTS_HOST  host system scripts to install
+#    SCRIPTS_IOC   ioc system scripts to install
+#    OBJS          object files to build and install
+#    OBJS_HOST     host system object files to build and install
+#    OBJS_IOC      ioc system object files to build and install
+#    USR_INCLUDES  include directories
+#    BIN_INSTALLS  binaries to install
+#    LIB_INSTALLS  library binaries to install
+#    RCS           win32 resource files for building libraries and prods
+#    PROD_RCS      win32 resource files for building prods
+#    LIB_RCS       win32 resource files for building libraries
+#
+#	Remark:
+#	If you define INC, e.g. INC = getopt.h, the source
+#	(getopt.h) must be in the source directory (..) and/or
+#	in one or more ../os/<OS_CLASS> directories.
+#
 #	Additional target architecture, T_A, Rules for USR_CFLAGS, USR_CXXFLAGS,
 #	and USR_CPPFLAGS which are applied before the above os_class Rules:
 #	1) USR_CFLAGS_$(OS_CLASS) is used
@@ -36,27 +90,6 @@
 #		USR_CFLAGS_vxWorks-68040 = -nil-
 #		USR_CFLAGS_vxWorks_DEFAULT = <defines for most vxWorks systems, not 68040>
 #
-#	These rules apply to these Makefile-variables:
-#	USR_CFLAGS	C flags
-#	USR_CXXFLAGS	C++ flags
-#	USR_CPPFLAGS	c preprocesser flags
-#	INC		include-files to install
-#	LIBSRCS		source files for building library
-#	LIB_SRCS	source files for building library
-#	SHRLIB_LIBS	libs needed by shared LIBRARY
-#	PROD_LIBS	libs needed by PROD and TESTPROD
-#	USR_LIBS	libs needed by PROD and TESTPROD
-#	USR_LDFLAGS	ld flags
-#	SYS_PROD_LIBS	system libs needed by PROD and TESTPROD
-#	PROD		products to build and install
-#	SCRIPTS		scripts to install
-#	USR_INCLUDES	include directories
-#
-#	Remark:
-#	If you define INC, e.g. INC = getopt.h, the source
-#	(getopt.h) must be in the source directory (..) and/or
-#	in one or more ../os/<OS_CLASS> directories.
-#	The INC source files cannot be created by the build.
 #
 
 ifneq ($(strip $(USR_CFLAGS_$(T_A))),)
@@ -123,14 +156,19 @@ USR_LDFLAGS+=$(USR_LDFLAGS_DEFAULT)
 endif
 endif
 
-#	check for special includes:
-#
-ifneq ($(strip $(INC_$(OS_CLASS))),)
-#	os-specific includes go to the include/os-directory:
-INC += $(subst -nil-,,$(INC_$(OS_CLASS)))
+ifneq ($(strip $(PROD_LDFLAGS_$(OS_CLASS))),)
+PROD_LDFLAGS+=$(subst -nil-,,$(PROD_LDFLAGS_$(OS_CLASS)))
 else
-ifdef INC_DEFAULT
-INC += $(INC_DEFAULT)
+ifdef PROD_LDFLAGS_DEFAULT
+PROD_LDFLAGS+=$(PROD_LDFLAGS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_LDFLAGS_$(OS_CLASS))),)
+LIB_LDFLAGS+=$(subst -nil-,,$(LIB_LDFLAGS_$(OS_CLASS)))
+else
+ifdef LIB_LDFLAGS_DEFAULT
+LIB_LDFLAGS+=$(LIB_LDFLAGS_DEFAULT)
 endif
 endif
 
@@ -160,6 +198,14 @@ SRCS+=$(SRCS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(USR_SRCS_$(OS_CLASS))),)
+USR_SRCS += $(subst -nil-,,$(USR_SRCS_$(OS_CLASS)))
+else
+ifdef USR_SRCS_DEFAULT
+USR_SRCS+=$(USR_SRCS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(PROD_SRCS_$(OS_CLASS))),)
 PROD_SRCS += $(subst -nil-,,$(PROD_SRCS_$(OS_CLASS)))
 else
@@ -176,6 +222,14 @@ BIN_INSTALLS+=$(BIN_INSTALLS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(LIB_INSTALLS_$(OS_CLASS))),)
+LIB_INSTALLS+=$(subst -nil-,,$(LIB_INSTALLS_$(OS_CLASS)))
+else
+ifdef LIB_INSTALLS_DEFAULT
+LIB_INSTALLS+=$(LIB_INSTALLS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(PROD_OBJS_$(OS_CLASS))),)
 PROD_OBJS+=$(subst -nil-,,$(PROD_OBJS_$(OS_CLASS)))
 else
@@ -184,6 +238,14 @@ PROD_OBJS+=$(PROD_OBJS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(USR_OBJS_$(OS_CLASS))),)
+USR_OBJS+=$(subst -nil-,,$(USR_OBJS_$(OS_CLASS)))
+else
+ifneq (,$(strip $(USR_OBJS_DEFAULT)))
+USR_OBJS+=$(USR_OBJS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(OBJS_$(OS_CLASS))),)
 OBJS+=$(subst -nil-,,$(OBJS_$(OS_CLASS)))
 else
@@ -208,11 +270,27 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
-ifneq ($(strip $(LDOBJS_$(OS_CLASS))),)
-LDOBJS+=$(subst -nil-,,$(LDOBJS_$(OS_CLASS)))
+ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
+PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
 else
-ifneq (,$(strip $(LDOBJS_DEFAULT)))
-LDOBJS+=$(LDOBJS_DEFAULT)
+ifdef PROD_OBJLIBS_DEFAULT
+PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
+LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
+else
+ifdef LIB_OBJLIBS_DEFAULT
+LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
+USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
+else
+ifdef USR_OBJLIBS_DEFAULT
+USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
 endif
 endif
 
@@ -248,6 +326,22 @@ LIBRARY_HOST+=$(LIBRARY_HOST_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(LOADABLE_LIBRARY_$(OS_CLASS))),)
+LOADABLE_LIBRARY+=$(subst -nil-,,$(LOADABLE_LIBRARY_$(OS_CLASS)))
+else
+ifneq (,$(strip $(LOADABLE_LIBRARY_DEFAULT)))
+LOADABLE_LIBRARY+=$(LOADABLE_LIBRARY_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LOADABLE_LIBRARY_HOST_$(OS_CLASS))),)
+LOADABLE_LIBRARY_HOST+=$(subst -nil-,,$(LOADABLE_LIBRARY_HOST_$(OS_CLASS)))
+else
+ifneq (,$(strip $(LOADABLE_LIBRARY_HOST_DEFAULT)))
+LOADABLE_LIBRARY_HOST+=$(LOADABLE_LIBRARY_HOST_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(PROD_LIBS_$(OS_CLASS))),)
 PROD_LIBS += $(subst -nil-,,$(PROD_LIBS_$(OS_CLASS)))
 else
@@ -256,6 +350,7 @@ PROD_LIBS += $(PROD_LIBS_DEFAULT)
 endif
 endif
 
+# SHRLIB_LIBS deprecated
 ifneq ($(strip $(SHRLIB_LIBS_$(OS_CLASS))),)
 SHRLIB_LIBS += $(subst -nil-,,$(SHRLIB_LIBS_$(OS_CLASS)))
 else
@@ -264,6 +359,14 @@ SHRLIB_LIBS += $(SHRLIB_LIBS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(LIB_LIBS_$(OS_CLASS))),)
+LIB_LIBS += $(subst -nil-,,$(LIB_LIBS_$(OS_CLASS)))
+else
+ifdef LIB_LIBS_DEFAULT
+LIB_LIBS += $(LIB_LIBS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(USR_LIBS_$(OS_CLASS))),)
 USR_LIBS += $(subst -nil-,,$(USR_LIBS_$(OS_CLASS)))
 else
@@ -275,6 +378,7 @@ endif
 #
 #	concat specific library contents (if defined) to SYS_PROD_LIBS
 #
+# SYS_PROD_LIBS deprecated
 ifneq ($(strip $(SYS_PROD_LIBS_$(OS_CLASS))),)
 SYS_PROD_LIBS += $(subst -nil-,,$(SYS_PROD_LIBS_$(OS_CLASS)))
 else
@@ -282,6 +386,31 @@ ifdef SYS_PROD_LIBS_DEFAULT
 SYS_PROD_LIBS += $(SYS_PROD_LIBS_DEFAULT)
 endif
 endif
+PROD_SYS_LIBS+=$(SYS_PROD_LIBS)
+
+ifneq ($(strip $(PROD_SYS_LIBS_$(OS_CLASS))),)
+PROD_SYS_LIBS += $(subst -nil-,,$(PROD_SYS_LIBS_$(OS_CLASS)))
+else
+ifdef PROD_SYS_LIBS_DEFAULT
+PROD_SYS_LIBS += $(PROD_SYS_LIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_SYS_LIBS_$(OS_CLASS))),)
+LIB_SYS_LIBS += $(subst -nil-,,$(LIB_SYS_LIBS_$(OS_CLASS)))
+else
+ifdef LIB_SYS_LIBS_DEFAULT
+LIB_SYS_LIBS += $(LIB_SYS_LIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_SYS_LIBS_$(OS_CLASS))),)
+USR_SYS_LIBS += $(subst -nil-,,$(USR_SYS_LIBS_$(OS_CLASS)))
+else
+ifdef USR_SYS_LIBS_DEFAULT
+USR_SYS_LIBS += $(USR_SYS_LIBS_DEFAULT)
+endif
+endif
 
 #
 #	concat specific products
@@ -375,3 +504,19 @@ RCS += $(RCS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PROD_RCS_$(OS_CLASS))),)
+PROD_RCS += $(subst -nil-,,$(PROD_RCS_$(OS_CLASS)))
+else
+ifdef PROD_RCS_DEFAULT
+PROD_RCS+=$(PROD_RCS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_RCS_$(OS_CLASS))),)
+LIB_RCS += $(subst -nil-,,$(LIB_RCS_$(OS_CLASS)))
+else
+ifdef LIB_RCS_DEFAULT
+LIB_RCS+=$(LIB_RCS_DEFAULT)
+endif
+endif
+

configure/CONFIG_BASE

@@ -19,30 +19,21 @@ EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
 ifdef T_A
 EPICS_BASE_LIB      = $(EPICS_BASE)/lib/$(T_A)
+EPICS_BASE_BIN      = $(EPICS_BASE)/bin/$(T_A)
 endif
 
-#Definitions for extensions convenience
-Com_DIR             = $(EPICS_BASE_LIB)
-asHost_DIR          = $(EPICS_BASE_LIB)
-asIoc_DIR           = $(EPICS_BASE_LIB)
-ca_DIR              = $(EPICS_BASE_LIB)
-cas_DIR             = $(EPICS_BASE_LIB)
-dbIoc_DIR           = $(EPICS_BASE_LIB)
-dbStaticHost_DIR    = $(EPICS_BASE_LIB)
-dbStaticIoc_DIR     = $(EPICS_BASE_LIB)
-dbtoolsIoc_DIR      = $(EPICS_BASE_LIB)
-gdd_DIR             = $(EPICS_BASE_LIB)
-iocsh_DIR           = $(EPICS_BASE_LIB)
-miscIoc_DIR         = $(EPICS_BASE_LIB)
-registryIoc_DIR     = $(EPICS_BASE_LIB)
-rsrvIoc_DIR         = $(EPICS_BASE_LIB)
-recIoc_DIR          = $(EPICS_BASE_LIB)
-softDevIoc_DIR      = $(EPICS_BASE_LIB)
-testDevIoc_DIR      = $(EPICS_BASE_LIB)
-recIocObj_DIR       = $(EPICS_BASE_LIB)
-softDevIocObj_DIR   = $(EPICS_BASE_LIB)
-testDevIocObj_DIR   = $(EPICS_BASE_LIB)
-iocCore_DIR         = $(EPICS_BASE_LIB)
+#---------------------------------------------------------------
+# Epics base Ioc libraries 
+
+EPICS_BASE_IOC_LIBS += recIoc softDevIoc iocsh 
+EPICS_BASE_IOC_LIBS += miscIoc rsrvIoc dbtoolsIoc asIoc
+EPICS_BASE_IOC_LIBS += dbIoc registryIoc dbStaticIoc ca Com 
+
+#---------------------------------------------------------------
+# Epics base Host libraries 
+
+EPICS_BASE_HOST_LIBS += cas gdd iocsh asHost dbStaticHost registryIoc
+EPICS_BASE_HOST_LIBS += ca Com
 
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
@@ -58,23 +49,30 @@ endif # EPICS_BASE
 BASE_CPPFLAGS = 
 
 # osithread default stack
-OSITHREAD_USE_DEFAULT_STACK = YES
+OSITHREAD_USE_DEFAULT_STACK = NO
 OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
 OSITHREAD_DEFAULT_STACK_FLAGS_NO =
 BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
 
+#---------------------------------------------------------------
+# Where to find the installed build tools
+
+EPICS_BASE_TOOLS_BIN_HOST = $(EPICS_BASE_BIN)
+EPICS_BASE_TOOLS_BIN_CROSS = $(EPICS_BASE_HOST_BIN)
+EPICS_BASE_TOOLS_BIN = $(EPICS_BASE_TOOLS_BIN_$(BUILD_CLASS))
+
 #---------------------------------------------------------------
 # Epics base build tools and tool flags
 
-MAKEBPT                    = $(EPICS_BASE_HOST_BIN)/makeBpt$(HOSTEXE)
-DBEXPAND                   = $(EPICS_BASE_HOST_BIN)/dbExpand$(HOSTEXE)
-DBTORECORDTYPEH            = $(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(HOSTEXE)
-DBTOMENUH                  = $(EPICS_BASE_HOST_BIN)/dbToMenuH$(HOSTEXE)
-REGISTERRECORDDEVICEDRIVER = $(PERL) $(EPICS_BASE_HOST_BIN)/registerRecordDeviceDriver.pl
+MAKEBPT                    = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/makeBpt$(HOSTEXE))
+DBEXPAND                   = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/dbExpand$(HOSTEXE))
+DBTORECORDTYPEH            = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/dbToRecordtypeH$(HOSTEXE))
+DBTOMENUH                  = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/dbToMenuH$(HOSTEXE))
+REGISTERRECORDDEVICEDRIVER = $(PERL) $(EPICS_BASE_TOOLS_BIN)/registerRecordDeviceDriver.pl
 
 # private versions of lex/yacc from EPICS
-EYACC = $(EPICS_BASE_HOST_BIN)/antelope$(HOSTEXE)
-ELEX = $(EPICS_BASE_HOST_BIN)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
+EYACC = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/antelope$(HOSTEXE))
+ELEX = $(call PATH_FILTER, $(EPICS_BASE_TOOLS_BIN)/e_flex$(HOSTEXE)) -S$(EPICS_BASE)/include/flex.skel.static
 
 YACC  = $(EYACC)
 LEX   = $(ELEX)

configure/CONFIG_BASE_VERSION

@@ -12,18 +12,40 @@
 #
 #  EPICS Version information
 #
-# This file is interpreted by the Bourne Shell (MakeRelease), so spaces are
-# not allowed around the '=' signs or in unquoted values.
+# Only the person making an official EPICS release should make changes in
+# this file.
 #
+# EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
+# version number to be included in the reported version string.
 
-EPICS_VERSION=3
-EPICS_REVISION=14
-EPICS_MODIFICATION=1
-EPICS_UPDATE_NAME=
-EPICS_UPDATE_LEVEL=0
+BASE_3_14=YES
 
-EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}"
+EPICS_VERSION = 3
+EPICS_REVISION = 14
+
+# This part may contain letters, eg 0beta1
+EPICS_MODIFICATION = 8
+
+# Not included if zero
+EPICS_PATCH_LEVEL = 1
+
+# This will be -CVS or empty at an official release point
+#EPICS_CVS_SNAPSHOT=-CVS
+EPICS_CVS_SNAPSHOT=
+
+# No changes should be needed below here
+
+ifneq ($(EPICS_PATCH_LEVEL),0)
+  EPICS_PATCH_VSTRING=.$(EPICS_PATCH_LEVEL)
+endif
+
+ifneq ($(strip $(EPICS_SITE_VERSION)),)
+  EPICS_SITE_VSTRING=-$(EPICS_SITE_VERSION)
+endif
+
+EPICS_SHORT_VERSION=$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)$(EPICS_PATCH_VSTRING)
+EPICS_VERSION_NUMBER=$(EPICS_SHORT_VERSION)$(EPICS_CVS_SNAPSHOT)$(EPICS_SITE_VSTRING)
+EPICS_VERSION_STRING="EPICS Version $(EPICS_VERSION_NUMBER)"
 
 CVS_DATE="\$$Date$$"
 CVS_TAG="\$$Name$$"
-

configure/CONFIG_COMMON

@@ -45,7 +45,7 @@ CHECK_RELEASE_NO =
 #-------------------------------------------------------
 # Directories
 
-INSTALL_LOCATION            = $(TOP)
+INSTALL_LOCATION            ?= $(TOP)
 TOOLS                       = $(CONFIG)/tools
 
 INSTALL_LOCATION_LIB        = $(INSTALL_LOCATION)/lib
@@ -73,6 +73,9 @@ INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 
+#Directories for libraries
+SHRLIB_SEARCH_DIRS          = $(INSTALL_LIB)
+
 #-------------------------------------------------------
 # Ext, app, and module configure dir targets
 CONFIG_TARGETS += CONFIG_APP_INCLUDE RULES_INCLUDE
@@ -87,7 +90,7 @@ BUILD_CLASS = HOST
 CMPLR=STRICT
 CXXCMPLR=STRICT
 STATIC_BUILD=NO
-SHARED_LIBRARIES=NO
+SHARED_LIBRARIES=YES
 HDEPENDS=YES
 HOST_OPT=YES
 CROSS_OPT=YES
@@ -100,6 +103,8 @@ GNU=NO
 DEP=.depends
 OBJ = .
 RES = .
+CMPLR_SUFFIX=
+CMPLR_PREFIX=
 
 #-------------------------------------------------------
 # tools for installing libraries and products
@@ -140,13 +145,13 @@ JAR =
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS)))
+TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS)))
 
-PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(PROD_SRCS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(LDOBJS) $(TARGET_OBJS) $(PRODUCT_OBJS)
+PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
+PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
 
-LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(LIB_SRCS) $(LIBSRCS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(LDOBJS) $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
+LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # WIN95/NT resource files
@@ -156,7 +161,7 @@ TARGET_RESS = $(addsuffix $(RES),$(basename $($*_RCS)))
 PROD_RESS = $(addsuffix $(RES),$(basename $(RCS) $(PROD_RCS)))
 PROD_LD_RESS = $(TARGET_RESS) $(PROD_RESS)
 
-LIBRARY_RESS = $(addsuffix $(RES),$(basename $(RCS) $(LIBRARY_RCS)))
+LIBRARY_RESS = $(addsuffix $(RES),$(basename $(RCS) $(LIB_RCS) $(LIBRARY_RCS)))
 LIBRARY_LD_RESS = $(TARGET_RESS) $(LIBRARY_RESS)
 
 #--------------------------------------------------
@@ -180,7 +185,6 @@ OP_SYS_CFLAGS =
 OP_SYS_CXXFLAGS = $(OP_SYS_CFLAGS)
 OP_SYS_LDFLAGS =
 OP_SYS_INCLUDES =
-OP_SYS_LDLIBS =
 
 # SOURCE* used by WIN32 only
 SOURCE_CFLAG =
@@ -196,19 +200,26 @@ USR_CPPFLAGS =
 USR_DBDFLAGS =
 USR_ARFLAGS =
 
+# Debug specific options
+DEBUG_CPPFLAGS =
+DEBUG_CFLAGS =
+DEBUG_CXXFLAGS = $(DEBUG_CFLAGS)
+DEBUG_LDFLAGS =
+DEBUG_LDLIBS =
+
 # Target specific options
 TARGET_INCLUDES = $($(basename $@)_INCLUDES_$(T_A))
 TARGET_CFLAGS = $($(basename $@)_CFLAGS_$(T_A))
 TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS_$(T_A))
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS_$(T_A))
 TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS_$(T_A))
 
 TARGET_INCLUDES += $($(basename $@)_INCLUDES_$(OS_CLASS)) $($(basename $@)_INCLUDES)
 TARGET_CFLAGS += $($(basename $@)_CFLAGS_$(OS_CLASS)) $($(basename $@)_CFLAGS)
 TARGET_CXXFLAGS += $($(basename $@)_CXXFLAGS_$(OS_CLASS)) $($(basename $@)_CXXFLAGS)
-TARGET_LDFLAGS += $($(basename $@)_LDFLAGS_$(OS_CLASS)) $($(basename $@)_LDFLAGS)
 TARGET_CPPFLAGS += $($(basename $@)_CPPFLAGS_$(OS_CLASS)) $($(basename $@)_CPPFLAGS)
 
+TARGET_LDFLAGS = $($*_LDFLAGS)
+
 # Level of ansi conformance flags
 CONFORM_CPPFLAGS = $(CONFORM_CPPFLAGS_$(CMPLR))
 CONFORM_CFLAGS = $(CONFORM_CFLAGS_$(CMPLR))
@@ -222,11 +233,6 @@ WARN_CXXFLAGS = $(WARN_CXXFLAGS_$($(BUILD_CLASS)_WARN))
 OPT_CFLAGS = $(OPT_CFLAGS_$($(BUILD_CLASS)_OPT))
 OPT_CXXFLAGS = $(OPT_CXXFLAGS_$($(BUILD_CLASS)_OPT))
 
-# Posix flags
-POSIX=YES
-POSIX_CPPFLAGS=$(POSIX_CPPFLAGS_$(POSIX))
-POSIX_LDLIBS=$(POSIX_LDLIBS_$(POSIX))
-
 # Static build flags
 STATIC_CFLAGS = $(STATIC_CFLAGS_$(STATIC_BUILD))
 STATIC_CXXCFLAGS = $(STATIC_CXXFLAGS_$(STATIC_BUILD))
@@ -234,31 +240,38 @@ STATIC_LDFLAGS = $(STATIC_LDFLAGS_$(STATIC_BUILD))
 STATIC_LDLIBS = $(STATIC_LDLIBS_$(STATIC_BUILD))
 
 #--------------------------------------------------
-#  Command-line input support default
+# cflags for shared library src files (from SHRLIB_CFLAGS)
+LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(LOADABLE_LIBRARY),$($(lib)_OBJS) $(LIBRARY_OBJS)))
+LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
+
+#--------------------------------------------------
+# Command-line input support default
 COMMANDLINE_LIBRARY = EPICS
 OP_SYS_LDLIBS += $(LDLIBS_$(COMMANDLINE_LIBRARY))
+OP_SYS_LDFLAGS += $(LDFLAGS_$(COMMANDLINE_LIBRARY))
 
 #--------------------------------------------------
 # Flags
 
 INCLUDES = -I. $(GENERIC_SRC_INCLUDES) $(INSTALL_INCLUDES) $(RELEASE_INCLUDES)\
- $(TARGET_INCLUDES) $(USR_INCLUDES) $(OP_SYS_INCLUDES) $(CROSS_INCLUDES)
+ $(TARGET_INCLUDES) $(USR_INCLUDES) $(OP_SYS_INCLUDES) $($(BUILD_CLASS)_INCLUDES)
 
-CFLAGS = $(CONFORM_CFLAGS) $(CROSS_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
+CFLAGS = $(CONFORM_CFLAGS) $($(BUILD_CLASS)_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
  $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS) $(OP_SYS_CFLAGS)
+ $(CODE_CFLAGS) $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS)
 
-CXXFLAGS = $(CONFORM_CXXFLAGS) $(CROSS_CXXFLAGS) $(OPT_CXXFLAGS)\
+CXXFLAGS = $(CONFORM_CXXFLAGS) $($(BUILD_CLASS)_CXXFLAGS) $(OPT_CXXFLAGS)\
  $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS)\
- $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS)
+ $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(PROD_LDFLAGS)\
- $(ARCH_DEP_LDFLAGS) $(OP_SYS_LDFLAGS) $(CROSS_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) \
+ $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $($(BUILD_CLASS)_LDFLAGS)\
+ $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = $(PROD_LDLIBS) $(STATIC_LDLIBS)\
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(OP_SYS_LDLIBS)
+LDLIBS = $(STATIC_LDLIBS)\
+ $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS) $(GNU_LDLIBS_$(GNU))
 
-CPPFLAGS += $(CONFORM_CPPFLAGS) $(CROSS_CPPFLAGS) $(POSIX_CPPFLAGS)\
+CPPFLAGS += $(CONFORM_CPPFLAGS) $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS)\
  $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
  $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
@@ -268,8 +281,14 @@ ARFLAGS =
 ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
 
 #--------------------------------------------------
-# ld default
-LDCMD = $(LD) -o $@ $^
+# 'Munch' link-edit
+MUNCH_CMD = $(LD) -o $@ $^
+
+#--------------------------------------------------
+# LEX default option (valid for EPICS base 3.13.0.beta12 and later)
+#
+# to allow characters that are not plain 7bit standard ASCII 
+LEXOPT +=  -8
 
 #--------------------------------------------------
 # Build compile line here
@@ -278,10 +297,15 @@ PATH_FILTER = $(1)
 COMPILE.c = $(CC) -c $(CPPFLAGS) $(CFLAGS) $(call PATH_FILTER,$(INCLUDES)) $(SOURCE_FLAG)
 COMPILE.cpp = $(CCC) -c $(CPPFLAGS) $(CXXFLAGS) $(call PATH_FILTER,$(INCLUDES)) $(SOURCE_CXXFLAG)
 
+#--------------------------------------------------
+# C preprocessor command
+PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
+
 #--------------------------------------------------
 # Depends command
 
 HDEPENDS_FLAGS =
+# Use only dependancies from current top tree
 HDEPENDS_INCLUDES = $(filter .%,$(subst -I,,$(INCLUDES)))
 HDEPENDSFLAGS = -m $*$(DEP) $(HDEPENDS_INCLUDES) $@ $<
 HDEPENDS_CMD_YES   = -$(MKMF) $(HDEPENDS_FLAGS) $(HDEPENDSFLAGS)
@@ -292,7 +316,7 @@ HDEPENDS_CMD  = $(HDEPENDS_CMD_$(HDEPENDS))
 # depends definition
 
 TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY), $($(name)_SRCS))
-SRC_FILES =  $(LIB_SRCS) $(LIBSRCS) $(SRCS) $(PROD_SRCS) $(TARGET_SRCS)
+SRC_FILES =  $(LIB_SRCS) $(LIBSRCS) $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(TARGET_SRCS)
 HDEPENDS_FILES_YES = $(addsuffix $(DEP),$(notdir $(basename $(SRC_FILES))))
 HDEPENDS_FILES  = $(HDEPENDS_FILES_$(HDEPENDS))
 
@@ -306,6 +330,7 @@ INSTALL_PROD= $(PRODNAME:%= $(INSTALL_BIN)/%)
 INSTALL_LIBS= $(LIBNAME:%=$(INSTALL_LIB)/%)
 INSTALL_MUNCHS= $(MUNCHNAME:%=$(INSTALL_BIN)/%)
 INSTALL_SHRLIBS= $(SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
+INSTALL_LOADABLE_SHRLIBS= $(LOADABLE_SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
 INSTALL_DLL_LINK_LIBS=$(DLL_LINK_LIBNAME:%=$(INSTALL_LIB)/%)
 INSTALL_TCLLIBS=$(TCLLIBNAME:%=$(INSTALL_TCLLIB)/%)
 INSTALL_TCLINDEX=$(TCLINDEX:%=$(INSTALL_TCLLIB)/%)
@@ -339,6 +364,7 @@ INSTALL_INC += $(foreach inc, $(INC), \
         $(OS_INSTALL_INC) \
         $(GENERIC_INSTALL_INC) \
         $(GENERATED_INSTALL_INC) ) )
+INSTALL_INC += $(addprefix $(INSTALL_INCLUDE)/os/$(OS_CLASS)/, $(INC_$(OS_CLASS)) )
 
 #
 # Rule 1

configure/CONFIG_ENV

@@ -15,16 +15,14 @@
 #
 #   CONFIG_ENV - EPICS Environment Parameter configuration file
 #
-# This file is interpreted by the Bourne Shell, so spaces are 
-# not allowed around the '=' signs or in unquoted values.
-# Makefile variables are not defined here.
+# This file is read by the script base/src/libCom/env/bldEnvdata.pl
+# Variable definitions must take the form
+#	VAR = VALUE
+# or
+#	VAR = "Value containing spaces"
+# with each one on its own line.
+# Enclosing spaces and "" will be trimmed.
 #
-# Note: This file is read by base/src/libCom/env/bldEnvdata.pl,
-# so the variable definitions in here should be kept 'simple':
-#   VAR=VALUE
-# each one on a single line.
-#
-
 
 #  Default environment settings
 
@@ -38,6 +36,7 @@ EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
 EPICS_CA_BEACON_PERIOD=15.0
+EPICS_CA_MAX_SEARCH_PERIOD=300.0
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""

configure/CONFIG_SITE

@@ -23,19 +23,34 @@
 #       <operating system>-<architecture>[-<alternate compiler>]
 #
 #  Currently Supporting:
-#	hpux-parisc
-#	osf-alpha
+#	aix-ppc                (HP compiler used for host builds)
+#	aix-ppc-gnu            (GNU compiler used for host builds)
+#	cygwin-x86             (cygwin compiler used for host builds)
+#	darwin-ppc
+#	hpux-parisc            (HP compiler used for host builds)
+#	hpux-parisc-gnu        (GNU compiler used for host builds)
+#	linux-ppc              (GNU compiler used for host builds)
+#	linux-ppc-bgl
+#	linux-x86              (GNU compiler used for host builds)
+#	linux-x86_64           (GNU compiler used for host builds)
+#	linux-x86-borland      (Borland C++ compiler used for host builds)
 #	solaris-sparc          (sun compiler used for host builds)
 #	solaris-sparc-gnu      (GNU compiler used for host builds)
+#	solaris-sparc64        (sun compiler used for host builds)
+#	solaris-sparc64-gnu    (GNU compiler used for host builds)
 #	solaris-x86            (sun compiler used for host builds)
 #	solaris-x86-gnu        (GNU compiler used for host builds)
-#	sun4-x86               (sun compiler used for host builds)
-#	linux-x86              (GNU compiler used for host builds)
 #	win32-x86              (MS Visual C++ compiler used for host builds)
+#	win32-x86_mingw        (MinGW compiler used for host builds)
 #	win32-x86-borland      (Borland C++ compiler used for host builds)
-#	lynxos-x86
-#	darwin-ppc
-#	linux-mpc82xx
+#	win32-x86-cygwin       (cygwin GNU compiler used for host builds)
+
+#  Debugging builds 
+#	linux-x86-debug        (GNU compiler with -g option for host builds)
+#	linux-x86_64-debug     (GNU compiler with -g option for host builds)
+#	solaris-sparc-debug    (sun compiler no optimization,-g for debugging info)
+#	win32-x86-debug        (MS Visual C++ compiler with debug option for host builds)
+
 
 #  EPICS_HOST_ARCH is a required environment variable
 #  Do not set EPICS_HOST_ARCH in this file. 
@@ -45,23 +60,41 @@
 #  The cross-compiler architectures to build EPICS for
 #
 #  Currently Supporting:
+#       linux-386     (linux-x86 host)
+#       linux-486     (linux-x86 host)
+#       linux-586     (linux-x86 host)
+#       linux-686     (linux-x86 host)
+#       linux-athlon  (linux-x86 host)
+#       linuxRT-mvme2100  (linux-x86 host)
 #       vxWorks-486
 #       vxWorks-68040
 #       vxWorks-68040lc
 #       vxWorks-68060
 #       vxWorks-pentium
 #       vxWorks-ppc603
+#       vxWorks-ppc603_long
 #       vxWorks-ppc604
+#       vxWorks-ppc604_long
+#       vxWorks6-mv2100
+#       vxWorks6-mv5100
 #       RTEMS-gen68360
+#       RTEMS-mcp750
 #       RTEMS-mvme167
+#       RTEMS-mvme2100
+#       RTEMS-mvme5500
 #       RTEMS-pc386
+#       RTEMS-psim
+#       RTEMS-uC5282
 #
+#  Debugging builds 
+#       vxWorks-68040-debug
+
 # Definitions of CROSS_COMPILER_TARGET_ARCHS in
 # configure/os/CONFIG_SITE.<host>.Common files will
 # override 
 #
 CROSS_COMPILER_TARGET_ARCHS=
-
+#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
 
 #  If only a subset of the host architectures perform
 #  the build for the CROSS_COMPILER_TARGET_ARCHS
@@ -83,21 +116,19 @@ CMPLR=STRICT
 CXXCMPLR=STRICT
 
 #  Build shared libraries?
-#  (archive libraries will also be built)
 #        must be either YES or NO
 #     NOTE: os/CONFIG.$(EPICS_HOST_ARCH).$(EPICS_HOST_ARCH) files and
 #     os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(EPICS_HOST_ARCH) files may override
 #
-#     NOTE WIN32: YES results in a DLL. CONFIG_SITE.Host.WIN32
-#                 distribution file contains YES override
+#     NOTE WIN32: YES results in a DLL.  Valid settings are
+#                   SHARED_LIBRARIES=YES and STATIC_BUILD=NO
+#                   SHARED_LIBRARIES=NO  and STATIC_BUILD=YES
 #
-#     NOTE solaris,Linux, and sun4: If YES then LD_LIBRARY_PATH must
-#     include fullpathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)
-#     for both the base build and when invoking base executables
-SHARED_LIBRARIES=NO
+SHARED_LIBRARIES=YES
 
 #  Build client objects statically ?
 #        must be either YES or NO
+#
 STATIC_BUILD=NO
 
 #  Should header dependancy files be automatically generated
@@ -121,6 +152,29 @@ HOST_WARN=YES
 #	must be either YES or NO
 CROSS_WARN=YES
 
-#  Installation directory
-INSTALL_LOCATION=$(TOP)
+#  Create and/or install perl build tools for R3.13 extension builds?
+#  must be either YES or NO
+#
+#  NOTE: Set to YES only if you have existing R3.13 extensions to be
+#  built with this base
+#
+COMPAT_TOOLS_313=NO
+
+#  Create and/or install files for R3.13 ioc application and extension builds?
+#  must be either YES or NO
+#
+#  NOTE: Set to YES only if you have existing R3.13 ioc applications
+#  and extensions to be built with this base
+#
+COMPAT_313=NO
+
+#  Installation directory
+#Note: INSTALL_LOCATION definition moved to configure/RELEASE file
+
+# Use POSIX thread priority scheduling (YES or NO)
+USE_POSIX_THREAD_PRIORITY_SCHEDULING = NO
+
+#  Site version number, if set will append '-' and this string to the
+#  EPICS version number string that is reported by many tools
+EPICS_SITE_VERSION =
 

configure/CONFIG_SITE_ENV

@@ -15,29 +15,42 @@
 #
 #	CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
 #
-# This file is interpreted by the Bourne Shell, so spaces are 
-# not allowed around the '=' signs or in unquoted values.
-# Makefile variables are not defined here.
-#
-# Note: This file is read by base/src/libCom/env/bldEnvdata.pl,
-# so the variable definitions in here should be kept 'simple':
-#	VAR=VALUE
-# each one on a single line.
+# This file is read by the script base/src/libCom/env/bldEnvdata.pl
+# Variable definitions must take the form
+#	VAR = VALUE
+# or
+#	VAR = "Value containing spaces"
+# with each one on its own line.
+# Enclosing spaces and "" will be trimmed.
 #
 
 #  Site-specific environment settings
 
 # Time service:
-# EPICS_TIMEZONE needed for vxWorks
-# EPICS_TIMEZONE=<name>::<minutesWest>:<start daylight>:<end daylight>
-# eg EPICS_TIMEZONE=CUS::360:033102:102802
-#  DST for 2003  US: Apr  6 - Oct 26
-#                EU: Mar 30 - Oct 26
-# EPICS_TS_NTP_INET ntp or Unix time server ip addr.
+# EPICS_TIMEZONE
+#	local timezone info for vxWorks IOCs.  The format required is
+#	<name>::<minutesWest>:<start daylight>:<end daylight>
+#	where the start and end are mmddhh - that is month,day,hour
+#	eg EPICS_TIMEZONE=CUS::360:033102:102802
+#
+#	DST for 2006  US: Apr  2 - Oct 29
+#	              EU: Mar 26 - Oct 29
+#	(see: http://www.worldtimezone.org/daylight.html)
+#
+# EPICS_TS_NTP_INET
+#	NTP or Unix time server ip address.  Uses boot host if not set.
 
-EPICS_TIMEZONE=CUS::360:040602:102602
+EPICS_TIMEZONE=CUS::360:040202:102902
+#EPICS_TIMEZONE=MET::-60:032602:102902
 EPICS_TS_NTP_INET=
 
+# IOC Shell:
+# IOCSH_PS1
+#	Prompt string
+# IOCSH_HISTSIZE
+#	Number of lines of command history to keep.
+IOCSH_PS1="epics> "
+IOCSH_HISTSIZE=50
 
 # Log Server:
 # EPICS_IOC_LOG_INET 
@@ -47,7 +60,7 @@ EPICS_TS_NTP_INET=
 # EPICS_IOC_LOG_FILE_LIMIT 
 #	maximum log file size.
 # EPICS_IOC_LOG_FILE_COMMAND 
-# 	A shell command string used to obtain a new 
+#	A shell command string used to obtain a new 
 #       path name in response to SIGHUP - the new path name will
 #       replace any path name supplied in EPICS_IOC_LOG_FILE_NAME
 

configure/Makefile

@@ -23,4 +23,6 @@ CONFIGS += $(subst ../,,$(wildcard ../RULES*))
 
 CONFIGS += $(subst ../,,$(wildcard ../tools/*.pl))
 
+TARGETS = CONFIG_APP_INCLUDE
+
 include $(TOP)/configure/RULES

configure/RELEASE

@@ -7,11 +7,19 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#RELEASE Location of external products
-#
-# NOTE: RELEASE.$(EPICS_HOST_ARCH) files will override
+# RELEASE: Define location of external EPICS products
+
+# VX_DIR definition now in os/CONFIG_SITE.Common.vxWorksCommon
+# RTEMS_BASE (and RTEMS_VERSION) now in os/CONFIG_SITE.Common.RTEMS
+
+# NB: Settings in RELEASE files can be overridden in files named
+#   RELEASE.$(EPICS_HOST_ARCH)
+#   RELEASE.Common.$(OS_CLASS)Common
+#   RELEASE.Common.$(T_A)
+#   RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+
+# If you don't want to install into $(TOP) dir then 
+# define INSTALL_LOCATION here
+#INSTALL_LOCATION=<fullpathname>
+#INSTALL_LOCATION=/home/phoebus/JBA/install
 
-#  Tornado directory
-VX_DIR = /usr/local/vw/tornado202
-# Is Tornado version  >= 2.2 ?   must be either YES or NO
-TORNADO_VERSION_2_2 = NO

configure/RULES.Db

@@ -11,9 +11,9 @@
 
 #####################################################  vpath
 
-vpath %.dbd $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DBD)) $(COMMON_DIR)
-vpath %.db $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DB)) $(COMMON_DIR)
-vpath %.vdb $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DB)) $(COMMON_DIR)
+vpath %.dbd $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DBD))
+vpath %.db $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DB))
+vpath %.vdb $(USR_VPATH) $(GENERIC_SRC_DIRS) $(dir $(DB))
 vpath %.substitutions $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 vpath %.template $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
@@ -23,6 +23,8 @@ vpath bpt%.data $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 # dbExpand
 INSTALL_DBDFLAGS += -I $(INSTALL_LOCATION)/dbd
 DBDFLAGS = $(USR_DBDFLAGS) -I . -I .. $(INSTALL_DBDFLAGS) $(RELEASE_DBDFLAGS)
+DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) -I. $(GENERIC_SRC_INCLUDES)
+DBFLAGS += -I$(COMMON_DIR)
 
 #####################################################  Targets
 
@@ -59,7 +61,7 @@ TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(pats
           $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
           $(TEMPLATE1)))))))))))
 TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME=$(firstword $(wildcard ../$*.template) $(TEMPLATE3))
+TEMPLATE_FILENAME=$(firstword $(wildcard $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
 
 # dbst based database optimization
 ifeq '$(DB_OPT)' 'YES'
@@ -79,6 +81,8 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(COMMON_DBDS) \
 DBDDEPENDS_FLAGS = $(filter .%,$(subst -I,,$(filter-out -S%,$(DBDFLAGS))))
 DBDDEPENDS_CMD = -$(MKMF) -m $@$(DEP) $(DBDDEPENDS_FLAGS) $@ $<
 
+MAKEDBDEPENDS = $(PERL) $(TOOLS)/makeDbDepends.pl
+
 ##################################################### 
 
 ifndef T_A
@@ -112,36 +116,26 @@ $(DBDDEPENDS_FILES):
 
 #####################################################  build dependancies, clean rule
 
+ifneq (,$(strip $(DBD_INSTALLS)))
+buildInstall : dbdInstalls
+endif
+
+ifneq (,$(strip $(DB_INSTALLS)))
+buildInstall : dbInstalls
+endif
+
+.PHONY: dbdInstalls dbInstalls
+
 inc : $(COMMON_INC) $(INSTALL_INC)
 
 build : $(COMMON_DBDS) $(COMMON_DBS) \
 	$(INSTALL_DBDS) $(INSTALL_DBS) \
-	$(DBDDEPENDS_FILES) $(INDDBFROMTEMPLATE) $(TARGETS)
+	$(DBDDEPENDS_FILES) $(TARGETS)
 
 clean:: 
 	@$(RM) $(COMMONS) $(DBDDEPENDS_FILES)
 	@$(RM) *_registerRecordDeviceDriver.cpp
-	@$(RM) $(INDDBFROMTEMPLATE) $(TARGETS)
-
-##################################################### "Foreign" templates
-
-TEMPLATE_LINKS	= $(filter-out $(notdir $(USES_TEMPLATE)), $(USES_TEMPLATE))
-TEMPLATE_FILES	= $(filter     $(notdir $(USES_TEMPLATE)), $(USES_TEMPLATE))
-COMMON_TEMPLATES=$(addsuffix $(COMMON_DIR)/,$(notdir $(TEMPLATE_LINKS)))
-
-ifneq '$(TEMPLATE_LINKS)' ''
-build: $(notdir $(TEMPLATE_LINKS))
-endif
-build: $(TEMPLATE_FILES)
-
-$(COMMON_TEMPLATES): $(COMMON_DIR)/%.template: 
-ifndef WIN32
-	@$(RM) $(notdir $(TEMPLATE_LINKS))
-	ln -s $(TEMPLATE_LINKS) 
-else
-	@$(RM) $(notdir $(TEMPLATE_LINKS))
-	$(CP) $(TEMPLATE_LINKS) 
-endif
+	@$(RM) $(TARGETS)
 
 ##################################################### CapFast filter
 
@@ -182,10 +176,18 @@ $(INSTALL_DB)/%.template: %.template
 
 ##################################################### INC files
 
+$(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
+	@$(RM) $@
+	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
+
 $(COMMON_DIR)/%Record.h: %Record.dbd
 	@$(RM) $@
 	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
 
+$(COMMON_DIR)/menu%.h: $(COMMON_DIR)/menu%.dbd
+	@$(RM) $@
+	$(DBTOMENUH) $< $@
+
 $(COMMON_DIR)/menu%.h: menu%.dbd
 	@$(RM) $@
 	$(DBTOMENUH) $< $@
@@ -196,18 +198,37 @@ $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $@
 	$(MAKEBPT) $< $@
 
+$(COMMON_DIR)/%.dbd: $(COMMON_DIR)/%Include.dbd 
+	@$(RM) $@$(DEP)
+	@$(DBDDEPENDS_CMD)
+	@echo "Expanding dbd"
+	@$(RM) $@
+	$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+
 $(COMMON_DIR)/%.dbd: %Include.dbd 
 	@$(RM) $@$(DEP)
 	@$(DBDDEPENDS_CMD)
 	@echo "Expanding dbd"
 	@$(RM) $@
-	$(DBEXPAND) $(DBDFLAGS) $< > $@
+	$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+
+$(COMMON_DIR)/%Include.dbd:
+	@$(RM) $@
+	$(PERL) $(TOOLS)/makeIncludeDbd.pl $($*_DBD) $@
+
+$(INSTALL_DBD)/%: $(COMMON_DIR)/%
+	@echo "Installing dbd file $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
 
 $(INSTALL_DBD)/%: %
 	@echo "Installing dbd file $@"
 	@$(INSTALL) -d -m 644 $< $(@D)
 
-.PRECIOUS: $(COMMON_DBDS)
+dbdInstalls:  $(DBD_INSTALLS)
+	@echo "Installing $(^F)"
+	@$(INSTALL) -d -m 555 $^ $(INSTALL_DBD)
+
+.PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%Include.dbd
 
 ##################################################### DB files
 
@@ -216,13 +237,30 @@ $(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf
 	@$(REPLACEVAR) < $@.VAR > $@
 	@$(RM) $@.VAR
 
+#$(COMMON_DIR)/%.db$(RAW): %.substitutions %.template
+#	@$(RM) $@$(DEP)
+#	@$(MAKEDBDEPENDS) $@ $^  >> $@$(DEP)
+#	@echo "Inflating database from $^"
+#	@$(RM) $@
+#	$(MSI) $(DBFLAGS) -S$< $(firstword $(patsubst %.substitutions,,$^)) > msi.tmp
+#	$(MV) msi.tmp $@
+
 $(COMMON_DIR)/%.db$(RAW): %.substitutions
 	@$(RM) $@$(DEP)
-	@$(DBDDEPENDS_CMD)
+	@$(MAKEDBDEPENDS) $@ $< $(TEMPLATE_FILENAME) >> $@$(DEP)
 	@echo "$@:$(TEMPLATE_FILENAME)" >> $@$(DEP)
+	@echo "Inflating database from $< $(TEMPLATE_FILENAME)"
+	@$(RM) $@
+	$(MSI) $(DBFLAGS) -S$< $(TEMPLATE_FILENAME) > msi.tmp
+	$(MV) msi.tmp $@
+
+$(COMMON_DIR)/%.db$(RAW): %.template
+	@$(RM) $@$(DEP)
+	@$(MAKEDBDEPENDS) $@ $^  >> $@$(DEP)
 	@echo "Inflating database from $<"
 	@$(RM) $@
-	$(MSI) -S$< $(TEMPLATE_FILENAME) > $@
+	$(MSI) $(DBFLAGS)  $< > msi.tmp
+	$(MV) msi.tmp $@
 
 # dbst based database optimization
 ifeq '$(DB_OPT)' 'YES'
@@ -236,10 +274,6 @@ $(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
 	@$(RM) $@
 	$(DBST) . $< -d > $@
 
-$(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
-	@echo "Installing db file $@"
-	@$(INSTALL) -d -m 644 $< $(@D)
-
 .PRECIOUS: $(COMMON_DIR)/%.db
 .PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
 else
@@ -249,14 +283,28 @@ $(INSTALL_DB)/%: %
 	@$(INSTALL) -d -m 644 $< $(@D)
 endif
 
+$(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
+	@echo "Installing db file $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
+
+dbInstalls:  $(DB_INSTALLS)
+	@echo "Installing $(^F)"
+	@$(INSTALL) -d -m 555 $^ $(INSTALL_DB)
+
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
 ##################################################### register record,device,driver support
 
+%_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd 
+	@$(RM) $@ temp.cpp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) > temp.cpp
+	$(MV) temp.cpp $@
+
 %_registerRecordDeviceDriver.cpp: %.dbd 
-	@$(RM) $@
-	$(REGISTERRECORDDEVICEDRIVER) $< > $@
+	@$(RM) $@ temp.cpp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) > temp.cpp
+	$(MV) temp.cpp $@
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 

configure/RULES.ioc

@@ -13,9 +13,19 @@ include $(CONFIG)/RULES_DIRS
 build: buildInstall
 install: buildInstall
 
+ifneq ($(findstring $(ARCH),$(BUILD_ARCHS)),)
 buildInstall: $(TARGETS)
 
-cdCommands: $(wildcard $(TOP)/configure/RELEASE*) $(TOP)/configure/CONFIG
+clean:
+	$(RM) cdCommands envPaths
+
+else 
+buildInstall:
+clean:
+endif
+
+envPaths cdCommands: $(wildcard $(TOP)/configure/RELEASE*) \
+	$(TOP)/configure/CONFIG $(INSTALL_BIN)
 	@$(RM) $@
 ifeq ($(IOCS_APPL_TOP),)
 	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) $@
@@ -23,6 +33,6 @@ else
 	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) -t $(IOCS_APPL_TOP) $@
 endif
 
-clean:
-	@$(RM) cdCommands
+realclean:
+	$(RM) cdCommands envPaths
 

configure/RULES_ARCHS

@@ -47,15 +47,30 @@ $(buildDirs):
 O.Common:
 	$(MKDIR) O.Common
 
-checkRelease: $(wildcard $(TOP)/configure/RELEASE*)
+#
+# RELEASE consistency checking
+
+# The RELEASE.$(EPICS_HOST_ARCH) files don't need to be included here:
+targetReleaseFiles = $(wildcard $(foreach arch, $(BUILD_ARCHS), \
+		$(TOP)/configure/RELEASE.Common.$(arch) \
+		$(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(arch)))
+checkReleaseTargets = $(addprefix checkRelease, $(suffix $(targetReleaseFiles)))
+
+checkRelease: $(checkReleaseTargets)
 	$(PERL) $(TOOLS)/convertRelease.pl -h $(EPICS_HOST_ARCH) $@
 
+$(checkReleaseTargets):checkRelease.%:
+	$(PERL) $(TOOLS)/convertRelease.pl -h $(EPICS_HOST_ARCH) -a $* checkRelease
+
 #
 # special clean rule
 #
 clean ::
 	$(RMDIR) $(addprefix O.,$(BUILD_ARCHS)) O.Common
 
+archclean ::
+	$(RMDIR) $(addprefix O.,$(BUILD_ARCHS))
+
 $(cleanArchTargets) ::
 	$(RMDIR) O.$(archPart)
 
@@ -65,6 +80,6 @@ realclean ::
 .PHONY : $(actionArchTargets)
 .PHONY : $(cleanArchTargets)
 .PHONY : $(BUILD_ARCHS)
-.PHONY : $(ACTIONS) clean realclean all
-.PHONY : checkRelease
+.PHONY : $(ACTIONS) clean realclean archclean all
+.PHONY : checkRelease $(checkReleaseTargets)
 

configure/RULES_BUILD

@@ -11,31 +11,8 @@
 #
 #	Rules for making things specified in Makefile
 #
-#	Some rules for filename-massage are system specific
-#	and have "ifdefs" here instead of using definitions
-#	from CONFIG.Target.<arch>  -  sorry about this,
-#	but so far the rules are quite similar on all systems
-#	except WIN32 has some specials.
-#
-#	Maybe there is a way to use indentation to make it
-#	easier to read this file?
-#
-#	Most things may also work if you say e.g.
-#		VAR+=ADD
-#	even if ADD is not there, but this way "VAR" would
-#	be defined in any case, that's why I try to use
-#		ifdef ADD
-#		VAR+=ADD
-#		endif
-#
-#	-kuk-
-
 #	we are in O.$(OS_CLASS), but most sources are one dir above:
 #
-#	The use of VPATH (no suffix specification) caused everything
-#	to break several times.
-#	vpath, of course, has the disadvantage that we need explicit rules
-#	for scripts or similar os-specific filed which have _no_ suffix...
 
 ifndef BASE_RULES_BUILD
 BASE_RULES_BUILD=1
@@ -59,6 +36,7 @@ include $(CONFIG)/CONFIG_ADDONS
 
 ifeq ($(findstring Host,$(VALID_BUILDS)),Host)
 LIBRARY += $(LIBRARY_HOST)
+LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_HOST)
 OBJS += $(OBJS_HOST)
 PROD += $(PROD_HOST)
 SCRIPTS += $(SCRIPTS_HOST)
@@ -97,15 +75,15 @@ endif
 #---------------------------------------------------------------
 # Create included Makefile for prod,testprod, and library targets
 
-ifneq (,$(strip $(PROD) $(TESTPROD) $(LIBRARY)))
+ifneq (,$(strip $(PROD) $(TESTPROD) $(LIBRARY) $(LOADABLE_LIBRARY)))
 
-MakefileInclude: ../Makefile
+MakefileInclude: ../Makefile $(wildcard $(TOP)/configure/RELEASE*)
 	@$(RM) $@
-	@$(PERL) $(TOOLS)/makeMakefileInclude.pl $(PROD) $(TESTPROD) $(LIBRARY) $@
+	@$(PERL) $(TOOLS)/makeMakefileInclude.pl $(PROD) $(TESTPROD) $(LIBRARY) $(LOADABLE_LIBRARY) $@
 
 -include MakefileInclude
 
-endif # PROD, TESTPROD, or LIBRARY defined
+endif # PROD, TESTPROD, LIBRARY, or LOADABLE_LIBRARY defined
 
 #---------------------------------------------------------------
 #   Products and Object libraries
@@ -116,13 +94,14 @@ PRODTARGETS += $(PRODNAME) $(MUNCHNAME) $(CTDT_SRCS) $(CTDT_OBJS) $(NMS)
 #   Libraries 
 #
 
-LIBTARGETS += $(LIBNAME)
-LIBTARGETS += $(INSTALL_LIBS)
-LIBTARGETS += $(SHRLIBNAME) $(INSTALL_SHRLIBS) \
-              $(DLL_LINK_LIBNAME) $(INSTALL_DLL_LINK_LIBS)
+LIBTARGETS += $(LIBNAME) $(INSTALL_LIBS) \
+              $(SHRLIBNAME) $(INSTALL_SHRLIBS) \
+              $(DLL_LINK_LIBNAME) $(INSTALL_DLL_LINK_LIBS) \
+              $(LOADABLE_SHRLIBNAME) $(INSTALL_LOADABLE_SHRLIBS)
 
 #---------------------------------------------------------------
 ifneq ($(CONFIG),$(TOP)/configure)
+RULES_TOP:=$(INSTALL_LOCATION)
 -include $(TOP)/configure/RULES_BUILD
 endif
 -include $(TOP)/configure/O.$(T_A)/RULES_INCLUDE
@@ -156,11 +135,15 @@ ifdef BIN_INSTALLS
 buildInstall : binInstalls
 endif
 
+ifdef LIB_INSTALLS
+buildInstall : libInstalls
+endif
+
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *$(OBJ) *.a $(TESTPRODNAME) $(LIBNAME) $(SHRLIBNAME)\
 	$(INC) *$(RES) $(TARGETS) $(DLL_LINK_LIBNAME) $(TDS) \
-	*.out MakefileInclude \
+	*.out MakefileInclude  $(LOADABLE_SHRLIBNAME) *.manifest *.exp \
 	$(COMMON_INC) $(HDEPENDS_FILES) $(PRODTARGETS)
 ifdef BAF
 	@$(RM) $(PROD_BAF) $(LIB_BAF) *$(BOF)
@@ -175,18 +158,6 @@ $(DIRECTORY_TARGETS) :
 	$(MKDIR) -p $@
 
 #---------------------------------------------------------------
-#---------------------------------------------------------------
-#	Generic Rules for 'simple' targets that
-#	can be generated from a single source with same basename.
-#
-#	The usual two rules .c* -> $(OBJ) and then  $(OBJ) -> $(EXE)
-#	do not work because the $(OBJ)->$(EXE) rule wouldn't
-#	know if the original source was C or C++.
-#
-#	Hint: The $(subst...) construct removes the .c or .cpp
-#	      as well as the '../' from the filename and adds $(OBJ):
-#	      e.g.  $< = '../abc.c'   ->  'abc.o'
-#
 #  The order of the following rules is
 #  VERY IMPORTANT !!!!
 
@@ -206,7 +177,7 @@ $(OBJLIBNAME):%$(OBJ): $(OBJLIB_LD_OBJS)
 %$(OBJ): %.c
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
-	$(COMPILE.c) $(call PATH_FILTER,$<)
+	$(COMPILE.c) $(call PATH_FILTER,$<) $(COMPILE_FILTER.c)
 
 %$(OBJ): %.cc
 	@$(HDEPENDS_CMD)
@@ -295,14 +266,18 @@ ifneq ($(strip $(RANLIB)),)
 	$(RANLIB) $@
 endif # RANLIB
 
-$(DLL_LINK_LIBNAME):$(LIB_PREFIX)%.lib: $(LIBRARY_OBJS) $(LIBRARY_RESS)
+$(DLL_LINK_LIBNAME):$(LIB_PREFIX)%.lib: $(LIBRARY_OBJS) $(LIBRARY_RESS) $(SHRLIB_DEPLIBS) 
 	@$(RM) $@
 	$(LINK.shrlib)
 
-$(SHRLIBNAME):$(LIB_PREFIX)%$(SHRLIB_SUFFIX): $(LIBRARY_OBJS) $(LIBRARY_RESS)
+$(SHRLIBNAME):$(LIB_PREFIX)%$(SHRLIB_SUFFIX): $(LIBRARY_OBJS) $(LIBRARY_RESS) $(SHRLIB_DEPLIBS)
 	@$(RM) $@
 	$(LINK.shrlib)
 
+$(LOADABLE_SHRLIBNAME):$(LOADABLE_SHRLIB_PREFIX)%$(LOADABLE_SHRLIB_SUFFIX): $(LIBRARY_OBJS) $(LIBRARY_RESS) $(SHRLIB_DEPLIBS)
+	@$(RM) $@
+	$(LINK.loadable_shrlib)
+
 # C++ munching for VxWorks
 %.nm : %$(EXE)
 	@$(RM) $@
@@ -316,13 +291,13 @@ $(SHRLIBNAME):$(LIB_PREFIX)%$(SHRLIB_SUFFIX): $(LIBRARY_OBJS) $(LIBRARY_RESS)
 	@$(RM) $@
 	$(PERL) $(TOOLS)/munch.pl <  $< > $@
 
-$(MUNCHNAME):%.munch : %_ctdt$(OBJ) %$(EXE)
+$(MUNCHNAME):%$(MUNCH_SUFFIX) : $(MUNCH_DEPENDS) %$(EXE)
 	@$(RM) $@
-	$(LDCMD)
+	$(MUNCH_CMD)
 
 $(OBJLIB_MUNCHNAME):%.munch : %_ctdt$(OBJ) %$(OBJ)
 	@$(RM) $@
-	$(LDCMD)
+	$(MUNCH_CMD)
 
 # Ext, app and module rules
 RULES_INCLUDE CONFIG_APP_INCLUDE: $(wildcard $(TOP)/configure/RELEASE*)
@@ -333,13 +308,25 @@ binInstalls:  $(BIN_INSTALLS)
 	@echo "Installing $(^F)"
 	@$(INSTALL) -d -m 555 $^ $(INSTALL_BIN)
 
+libInstalls:  $(LIB_INSTALLS)
+	@echo "Installing $(^F)"
+	@$(INSTALL) -d -m 555 $^ $(INSTALL_LIB)
+
 $(INSTALL_BIN)/%: ../os/$(OS_CLASS)/%
 	@echo "Installing os-specific script $@"
 	@$(INSTALL_PRODUCT) -d -m 555 $< $(INSTALL_BIN)
 
 $(INSTALL_BIN)/%: %
 	@echo "Installing binary $@"
+ifdef WIN32
+ifdef BORLAND
 	@$(INSTALL_PRODUCT) -d -m 555 $< $(INSTALL_BIN)
+else
+	@$(INSTALL_PRODUCT) -d -m 555 $<* $(INSTALL_BIN)
+endif
+else
+	@$(INSTALL_PRODUCT) -d -m 555 $< $(INSTALL_BIN)
+endif
 
 $(INSTALL_BIN)/%: ../%
 	@echo "Installing script $@"
@@ -357,24 +344,36 @@ $(INSTALL_LIB)/%.lib: %.lib
 	@$(INSTALL_LIBRARY) -d -m 644 $< $(INSTALL_LIB)
 
 $(INSTALL_SHRLIB)/lib%: lib%
-	@echo "Installing library $@"
+	@echo "Installing shared library $@"
 	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
-ifdef SHRLIB_VERSION
+ifneq (,$(strip $(SHRLIB_VERSION)))
 	@$(RM) $(subst .$(SHRLIB_VERSION),,$@)
 	ln -s $< $(subst .$(SHRLIB_VERSION),,$@)
-
 endif # SHRLIB_VERSION
 
+
 ifneq ($(INSTALL_TCLLIB),$(INSTALL_BIN))
 $(INSTALL_TCLLIB)/%: %
 	@echo "Installing Tcl library $@"
 	@$(INSTALL) -d -m 555 $< $(INSTALL_TCLLIB)
- 
+
 $(INSTALL_TCLLIB)/%: ../%
 	@echo "Installing Tcl library $@"
 	@$(INSTALL) -d -m 555 $< $(INSTALL_TCLLIB)
 endif
 
+$(INSTALL_TCLLIB)/$(TCLINDEX): $(INSTALL_TCLLIBS)
+	@echo "Updating $@"
+	@echo eval auto_mkindex $(INSTALL_TCLLIB) "$(TCLLIBNAME)" | tclsh
+
+$(INSTALL_LOADABLE_SHRLIBS): $(INSTALL_SHRLIB)/%: %
+	@echo "Installing loadable shared library $@"
+	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
+ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
+	@$(RM) $(subst .$(LOADABLE_SHRLIB_VERSION),,$@)
+	ln -s $< $(subst .$(LOADABLE_SHRLIB_VERSION),,$@)
+endif # LOADABLE_SHRLIB_VERSION
+
 $(INSTALL_CONFIG)/%: %
 	@echo "Installing config file $@"
 	@$(INSTALL) -d -m 644 $< $(@D)
@@ -422,9 +421,7 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 .PRECIOUS: %.i %.o %.c %.nm %.cpp %.cc
 .PRECIOUS: $(COMMON_INC)
 
-.PHONY: all inc build install clean rebuild buildInstall binInstalls
+.PHONY: all inc build install clean rebuild buildInstall binInstalls libInstalls
 
 endif # BASE_RULES_BUILD
 #	EOF RULES_BUILD
-
-

configure/RULES_DIRS

@@ -13,7 +13,7 @@
  
 
 ARCHS += $(BUILD_ARCHS)
-ACTIONS += inc build install buildInstall clean realclean
+ACTIONS += inc build install buildInstall clean realclean archclean
  
 dirPart = $(word 1, $(subst $(DIVIDER), ,$@))
 actionArchPart = $(join $(word 2, $(subst $(DIVIDER), ,$@)), \

configure/RULES_JAVA

@@ -11,36 +11,42 @@
 #
 
 
+ifeq ($(BUILD_CLASS),HOST)
+
 #-------------------------------------------------------
 # java jdk1.1.5 definitions
 
 JAVA_INC = $(JAVA_DIR)/include
 JAVA_BIN = $(JAVA_DIR)/bin
-JAVA_INCLUDES += -I${JAVA_INC} -I${JAVA_INC}/${OS_CLASS}
+JAVA_INCLUDES += -I$(JAVA_INC) -I$(JAVA_INC)/$(word 1, $(subst -, ,$(T_A))) -I$(COMMON_DIR)
 
 JAVACCMD = $(subst \,/,$(JAVA_BIN)/javac$(EXE) $(CLASSPATH) $(SOURCEPATH) $(JAVACFLAGS))
 JAVAHCMD = $(subst \,/,$(JAVA_BIN)/javah$(EXE) -d $(COMMON_DIR) -force $(CLASSPATH) $(JAVAHFLAGS))
-JARCMD   = $(subst \,/,$(JAVA_BIN)/jar$(EXE) $(JAR_OPTIONS) $(COMMON_JAR) $(JARINPUT))
+JARCMD   = $(subst \,/,$(JAVA_BIN)/jar$(EXE) $(JAR_OPTIONS) $@ $(JARINPUT) $(JARPACKAGES))
 
 #-------------------------------------------------------
 vpath %.java .. 
+vpath %.jar .. $(COMMON_DIR)
 
-CLASSPATH=-classpath $(INSTALL_JAVA)$(addprefix :,$(USR_CLASSPATH))
-SOURCEPATH=-sourcepath .:..:../..
+empty:=
+space:= $(empty) $(empty)
+CLASSPATH = -classpath $(subst $(space),:,$(strip $(USR_PRECLASSPATH) $(INSTALL_JAVA) $(USR_CLASSPATH)))
+SOURCEPATH = -sourcepath .:..:../..
 
 #-------------------------------------------------------
-# Java install directory
+# Java directory
 
-INSTALL_JAVA = $(INSTALL_LOCATION)/javalib
+ifdef JAVA
 JAVA_DIRECTORY_TARGETS += $(INSTALL_JAVA)
+endif
 
 #-------------------------------------------------------
 # Java native method C header files
 
 JAVAHFLAGS += $(USR_JAVAHFLAGS)
-COMMON_JAVAINC += $(addprefix $(COMMON_DIR)/,$(JAVAINC))
 JAVAINC_CLASSFILES += $(addprefix $(INSTALL_JAVA)/,$(subst _,/,$(subst .h,.class,$(JAVAINC))))
 JAVAINC_CLASSNAMES += $(subst _,.,$(subst .h,,$(JAVAINC)))
+COMMON_JAVAINC += $(addprefix $(COMMON_DIR)/,$(JAVAINC))
 
 #-------------------------------------------------------
 # Java class files
@@ -57,11 +63,13 @@ DEPTESTJAVA += $(subst .class,.java,$(TESTCLASSES))
 #-------------------------------------------------------
 # Java jar file
 
-COMMON_JAR += $(addprefix $(COMMON_DIR)/,$(JAR))
-INSTALL_JAR =$(addprefix $(INSTALL_JAVA)/,$(JAR))
-JARMANIFEST += $(firstword $(trim $(MANIFEST) $(JAR_MANIFEST)))
-JARINPUT += $(subst .java,.class,$(JAR_INPUT))
-JARDEPFILES +=  $(JARINPUT) $(JARMANIFEST)
+INSTALL_JAR =$(addprefix $(INSTALL_JAVA)/,$(JAR) $(JAR_INPUT))
+JARMANIFEST += $(firstword $(MANIFEST) $(JAR_MANIFEST))
+JARDEPFILES += $(addprefix $(INSTALL_JAVA)/,$(subst .java,.class,$(JAVA)) $(JAR_INPUT))
+JARINPUT += $(foreach inp,$(JAR_INPUT),-C $(INSTALL_JAVA) $(subst .java,.class,$(inp)))
+JARPACKAGES += $(foreach pkg,$(JAR_PACKAGES),-C $(INSTALL_JAVA) $(subst .,/,$(pkg)))
+PACKAGEDIRS += $(foreach pkg,$(JAR_PACKAGES),$(addprefix $(INSTALL_JAVA)/,$(subst .,/,$(pkg))))
+
 ifneq ($(JARMANIFEST),)
 JAR_OPTIONS = cvmf $(JARMANIFEST)
 else
@@ -70,10 +78,10 @@ endif
 
 #-------------------------------------------------------
 # Java doc  definitions
-ifeq ($(JAVADOC),YES)
+ifdef JAVADOC
 JAVADOCFLAGS += $(USR_JAVADOCFLAGS)
 JAVADOCCMD = $(subst \,/,$(JAVA_BIN)/javadoc$(EXE) $(CLASSPATH) $(SOURCEPATH) $(JAVADOCFLAGS))
-INSTALL_JAVADOC = $(CLASSES:%.class=$(INSTALL_HTML)/%.html)
+INSTALL_JAVADOC = $(addprefix $(INSTALL_HTML)/,$(JAVADOC))/index.html
 endif
 
 #-------------------------------------------------------
@@ -91,18 +99,20 @@ inc:  $(JAVA_DIRECTORY_TARGETS) $(INSTALL_CLASSES) $(COMMON_JAVAINC)
 
 build: inc
 
-build:  $(COMMON_TESTCLASSES) $(COMMON_JAR)
+build:  $(COMMON_TESTCLASSES)
 
 buildInstall : $(INSTALL_JAR) $(INSTALL_JAVADOC)
 
 #This clean works only from O.* dirs.
 clean:: 
-	@$(RMDIR) $(INSTALL_CLASSES)
+	@$(RMDIR) $(INSTALL_CLASSES) $(PACKAGEDIRS)
 	@$(RM) $(INSTALL_JAR) $(INSTALL_JAVADOC)
-	@$(RM) $(COMMON_TESTCLASSES) $(COMMON_JAR) $(COMMON_JAVAINC)
+	@$(RM) $(COMMON_TESTCLASSES) $(COMMON_JAVAINC)
 
+ifdef JAVA_DIRECTORY_TARGETS
 $(JAVA_DIRECTORY_TARGETS):
 	$(MKDIR) -p $@
+endif
 
 $(COMMON_JAVAINC):$(JAVAINC_CLASSFILES)
 	@echo Creating header files $(COMMON_JAVAINC)
@@ -119,10 +129,10 @@ $(INSTALL_CLASSES): $(addprefix ../,$(DEPJAVA))
 	@$(RM) $@
 	$(JAVACCMD) -d $(INSTALL_JAVA) $^
 
-$(INSTALL_JAVADOC): $(addprefix ../,$(DEPJAVA))
-	@echo Creating java class files 
+$(INSTALL_JAVADOC): $(addprefix ../,$(JAVA))
+	@echo Creating java doc files 
 	@$(RM) $@
-	$(JAVADOCCMD) -d $(INSTALL_JAVA) $^
+	$(JAVADOCCMD) -d $(addprefix $(INSTALL_HTML)/,$(JAVADOC)) $^
 
 $(COMMON_DIR)/%.jar: $(JARDEPFILES)
 	@echo Creating java jar file $@
@@ -133,4 +143,16 @@ $(INSTALL_JAVA)/%.jar: $(COMMON_DIR)/%.jar
 	@echo "Installing java jar file $@"
 	@$(INSTALL) -d -m 644 $< $(@D)
 
+$(INSTALL_JAVA)/%.jar: %.jar
+	@echo "Installing java jar file $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
+
+$(addprefix $(INSTALL_JAVA)/, $(JARINPUT)): $(INSTALL_JAVA)/%: ../%
+	@echo "Installing jar input file $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
+
 .PHONY: all install buildInstall rebuild clean build inc
+
+.PRECIOUS: $(COMMON_JAVAINC)
+
+endif

configure/RULES_TOP

@@ -13,6 +13,10 @@
 
 include $(CONFIG)/RULES_DIRS
 
+UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
+        $(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
+        $(INSTALL_DB)
+
 uninstallArchTargets = $(foreach arch,$(BUILD_ARCHS), uninstall$(DIVIDER)$(arch))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))
 
@@ -20,29 +24,29 @@ $(uninstallArchTargets): uninstallDirs
 	@$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart) $(INSTALL_LOCATION_LIB)/$(archPart) 
 
 cleandirs:
-	@echo " " #stops "nothing to be done for cleandirs" message
 ifeq ($(wildcard $(INSTALL_LOCATION_BIN)/*),)
 	@$(RMDIR) $(INSTALL_LOCATION_BIN)
 endif
 ifeq ($(wildcard $(INSTALL_LOCATION_LIB)/*),)
 	@$(RMDIR) $(INSTALL_LOCATION_LIB)
 endif
+	@echo
+# The echo above stops a "nothing to be done for cleandirs" message
 
 distclean: realclean realuninstall
 
+cvsclean:
+	@$(PERL) $(TOOLS)/cvsclean.pl 
+
 realuninstall:
 	@$(RMDIR) $(INSTALL_LOCATION_BIN) $(INSTALL_LOCATION_LIB)
-	@$(RMDIR) $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
-		$(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
-		$(INSTALL_DB)
+	@$(RMDIR) $(UNINSTALL_DIRS)
 
 uninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
 	@$(MAKE) -f Makefile  cleandirs
 
 uninstallDirs:
-	@$(RMDIR) $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
-		$(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
-		$(INSTALL_DB)
+	@$(RMDIR) $(UNINSTALL_DIRS)
 
 help:
 	@echo "Usage: gnumake [options] [target] ..."
@@ -57,6 +61,7 @@ help:
 	@echo "     rebuild        - Same as clean install"
 	@echo "     inc            - Installs header files"
 	@echo "     build          - Builds all targets"
+	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
 	@echo "\"Partial\" build targets supported by Makefiles:"
 	@echo "     inc.<arch>     - Installs <arch> only header files."
 	@echo "     install.<arch> - Builds and installs <arch> only."
@@ -66,10 +71,12 @@ help:
 	@echo "     uninstall      - Cleans directories created by the install."
 	@echo "     realuninstall  - Removes ALL install dirs"
 	@echo "     distclean      - Same as realclean realuninstall."
+	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
 	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
 .PHONY : $(uninstallArchTargets)
 .PHONY : uninstall help cleandirs distclean uninstallDirs realuninstall
+.PHONY : cvsclean
 

configure/Sample.Makefile

@@ -52,14 +52,12 @@ a_file_CPPFLAGS_WIN32   = -DVERSION='WIN32 port'
 #
 #	In here you supply just the filename without '../' etc.
 #	While building in an O.xxx subdir, the
-#	sources are extracted from either the
-#	             '..'
-#	dir or - if it exists - the dir
-#	             '../$(OS_CLASS)'
-#	is preferred.
+#	sources are extracted from the
+#   ../os/$(OS_CLASS) directory if it exists, or
+#   ../os/default directory if it exists, or
+#	.. directory
 #	---------------------------------------------------------
 
-
 #	includes to install from this Makefile
 #
 #	again: if INC_$(OS_CLASS) is defined, it is added to INC,
@@ -74,7 +72,7 @@ INC         = file.h
 #	defining a library
 # --------------------------------------------------------------------
 #
-#	Contents of a library are specified via SRCS, LIBSRCS, or .._SRCS.
+#	Contents of a library are specified via SRCS, LIB_SRCS, or .._SRCS.
 #	From this the platform specific object names (.o, .obj, ...)
 #	are derived automatically.
 #
@@ -88,7 +86,7 @@ INC         = file.h
 #	./os/OS_CLASS
 #	./os/generic
 #	.
-#	So usually only LIBSRCS should be sufficient!
+#	So usually only LIB_SRCS should be sufficient!
 
 #   SRCS files will be used for both LIBRARY and PROD
 SRCS            = file_for_lib.c another_file.cpp
@@ -101,10 +99,11 @@ libname_SRCS_DEFAULT    = posix.c
 libname_SRCS_WIN32      = win32_special.c
 libname_SRCS_Linux      = -nil-
 #
-LIBSRCS         = file_for_lib.c another_file.cpp
-LIBSRCS_DEFAULT = posix.c
-LIBSRCS_WIN32   = win32_special.c
-LIBSRCS_Linux   = -nil-
+#	SRCS that are used for all libraries
+LIB_SRCS         = file_for_lib.c another_file.cpp
+LIB_SRCS_DEFAULT = posix.c
+LIB_SRCS_WIN32   = win32_special.c
+LIB_SRCS_Linux   = -nil-
 
 #	Library to build:
 #	lib$(LIBRARY).a  or   ..dll/..exp/..lib
@@ -113,13 +112,9 @@ LIBRARY=libname
 #
 #	Host or Ioc platform specific library to build:
 #
-LIBRARY_IOC=libname
-LIBRARY_HOST=libname
+LIBRARY_IOC=libnameIoc
+LIBRARY_HOST=libnameHost
 
-# if SHARED_LIBRARIES is YES then shared and archive libraries will
-#	both be built 
-#SHARED_LIBRARIES = YES
-#
 #	Library version
 SHRLIB_VERSION = 
 #	On WIN32 results in /version:$(SHRLIB_VERSION) link option
@@ -132,10 +127,15 @@ SHRLIB_VERSION =
 #	if SRCS is undefined, it defaults to $(PROD).c 
 SRCS=a.c b.c c.c
 
+#	SRCS that are used for all PRODs
+#
+PROD_SRCS = ppp.c qqq.c
+
 #	SRCS that are only used for PROD a_file
 #
 a_file_SRCS = aa.c bb.c
 
+#
 #	EPICS libs needed to link PROD, TESTPROD and sharable library
 #
 #	note that DLL_LIBS (the libraries needed to link a shareable
@@ -143,33 +143,41 @@ a_file_SRCS = aa.c bb.c
 #	below minus the name of the sharable library (LIBRARY)
 #	
 #
-# for all systems:
+# ----------  libraries for a specific product pppp
+# for all systems
+pppp_LIBS         = Com Ca
+# for most systems:
+pppp_LIBS_DEFAULT = mathlib
+pppp_LIBS_WIN32   = -nil-
+
+# ---------- libraries for all products
+# for all systems
 PROD_LIBS         = Com Ca
 # for most systems:
 PROD_LIBS_DEFAULT = mathlib
 PROD_LIBS_WIN32   = -nil-
 
-#	system libs needed to link PROD, TESTPROD and sharable library
-#
-# for all systems:
-SYS_PROD_LIBS     = m
-# for most systems:
-SYS_PROD_LIBS_DEFAULT = foolib
-SYS_PROD_LIBS_WIN32   = -nil-
-
-#	other libs needed to link PROD, TESTPROD and sharable library
-#
-# for all systems:
+# ---------- Libraries for all products and all libraries:
+# for all systems
 USR_LIBS     = Xm Xt X11
 Xm_DIR = $(MOTIF_LIB)
 Xt_DIR = $(X11_LIB)
 X11_DIR = $(X11_LIB)
 
-# for most systems:
+# for most systems
 USR_LIBS_DEFAULT = foolib
 USR_LIBS_WIN32   = -nil-
 foolib_DIR = $(FOO_LIB)
 
+#	system libs needed to link PROD, TESTPROD and sharable library
+#
+# ---------- system libraries for all products
+# for all systems:
+PROD_SYS_LIBS     = m
+# for most systems:
+PROD_SYS_LIBS_DEFAULT = foolib
+PROD_SYS_LIBS_WIN32   = -nil-
+
 #	Product,
 #	may be   caRepeater.o -> caRepeater
 #	or       caRepeater.obj -> caRepeater.exe
@@ -179,6 +187,9 @@ PROD_WIN32   = product_only_for_WIN32
 PROD_Linux   = product_only_for_Linux
 PROD_solaris = product_only_for_solaris
 
+PROD_HOST    = product_only_for_host_type_systems
+PROD_IOC     = product_only_for_ioc_type_systems
+
 #	Product version
 PROD_VERSION = 
 #	On WIN32 results in /version:$(SHRLIB_VERSION) link option
@@ -186,7 +197,7 @@ PROD_VERSION =
 
 #	Scripts to install
 #
-#	If there is  both  ../$(SCRIPT) and  ../$(OS_CLASS)/$(SCRIPT),
+#	If there is  both  ../$(SCRIPTS) and  ../$(OS_CLASS)/$(SCRIPTS),
 #	the latter, system specific version will be installed!
 #
 SCRIPTS_DEFAULT = script_for_rest

configure/os/CONFIG.Common.RTEMS

@@ -13,17 +13,19 @@
 #-------------------------------------------------------
 #
 
-#-------------------------------------------------------
-# Where to find RTEMS
-RTEMS_BASE=/opt/rtems
-
 #-------------------------------------------------------
 # RTEMS tools are similar to UNIX tools
 -include $(CONFIG)/os/CONFIG.Common.UnixCommon
 
+GNU_TARGET_INCLUDE_DIR =
+
+#--------------------------------------------------
+# Get RTEMS_BASE definition
+-include $(CONFIG)/os/CONFIG_SITE.Common.RTEMS
+
 #-------------------------------------------------------
 # Pick up the RTEMS tool/path definitions from the RTEMS BSP directory.
-include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems/$(subst RTEMS-,,$(T_A))/Makefile.inc
+include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(subst RTEMS-,,$(T_A))/Makefile.inc
 include $(RTEMS_CUSTOM)
 include $(CONFIG.CC)
 
@@ -34,8 +36,6 @@ CCC = $(RTEMS_BASE)/bin/$(CXX)
 CPP = $(RTEMS_BASE)/bin/$(CC_FOR_TARGET) -x c -E
 AR = $(RTEMS_BASE)/bin/$(AR_FOR_TARGET)
 LD = $(RTEMS_BASE)/bin/$(LD_FOR_TARGET) -r
-RTEMS_LDFLAGS := $(STATIC_LDFLAGS) $(LDFLAGS)
-LINK.cpp = $(CCC) -o $@ $(RTEMS_LDFLAGS) $(LDFLAGS) $(PROD_LD_OBJS) $(PROD_LD_RESS) $(LDLIBS)
 
 RANLIB := $(RTEMS_BASE)/bin/$(RANLIB)
 
@@ -48,27 +48,33 @@ VALID_BUILDS = Ioc
 # through the following contortions to get the EPICS flags back.
 CFLAGS = $(CONFORM_CFLAGS) $(CROSS_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
  $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS) $(OP_SYS_CFLAGS)
+ $(CODE_CFLAGS) $(STATIC_CFLAGS)  $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS)
 
 CXXFLAGS = $(CONFORM_CXXFLAGS) $(CROSS_CXXFLAGS) $(OPT_CXXFLAGS)\
  $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS)\
  $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS)\
- $(CROSS_CXXFLAGS)
+ $(LIBRARY_SRC_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(PROD_LDFLAGS)\
- $(ARCH_DEP_LDFLAGS) $(OP_SYS_LDFLAGS) $(CROSS_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) \
+ $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $(CROSS_LDFLAGS)\
+ $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = $(PROD_LDLIBS) $(STATIC_LDLIBS)\
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(OP_SYS_LDLIBS)
+LDLIBS = $(STATIC_LDLIBS)\
+ $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)
 
-CPPFLAGS += $(CROSS_CPPFLAGS) $(POSIX_CPPFLAGS) $(BASE_CPPFLAGS)\
- $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
- $(OP_SYS_CPPFLAGS) $(CODE_CPPFLAGS)
+CPPFLAGS += $(CONFORM_CPPFLAGS) $(CROSS_CPPFLAGS) $(POSIX_CPPFLAGS)\
+$(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
+ $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
 #--------------------------------------------------
 # Although RTEMS uses gcc, it wants to use gcc its own way
 CROSS_CPPFLAGS =
 CROSS_LDFLAGS =
+SHRLIB_CFLAGS =
+OPT_CFLAGS_YES   = $(CFLAGS_OPTIMIZE_V)
+OPT_CXXFLAGS_YES = $(CFLAGS_OPTIMIZE_V)
+OPT_CFLAGS_NO    = $(CFLAGS_DEBUG_V)
+OPT_CXXFLAGS_NO  = $(CFLAGS_DEBUG_V)
 
 #--------------------------------------------------
 # operating system class (include/os/<os_class>)
@@ -76,7 +82,7 @@ OS_CLASS = RTEMS
 
 #--------------------------------------------------
 # Operating system flags
-OP_SYS_LDLIBS += -lrtemsCom -lrtemscpu -lCom -lm
+OP_SYS_LDLIBS += -lrtemsCom -lrtemscpu -lCom -lrtemsNfs -lm
 OP_SYS_LDFLAGS += $(CPU_CFLAGS) -u Init \
                  $(PROJECT_RELEASE)/lib/no-dpmem.rel \
                  $(PROJECT_RELEASE)/lib/no-mp.rel \
@@ -92,14 +98,14 @@ CODE_CFLAGS =
 CODE_CXXFLAGS =
 
 #--------------------------------------------------
-# RTEMS uses the inline keyword, so get rid of pedantic warnings
+# RTEMS uses the inline keyword so -pedantic causes too many problems.
 CONFORM_CFLAGS_STRICT = -ansi
 CONFORM_CXXFLAGS_STRICT = -ansi
 
 #--------------------------------------------------
 # Command-line input support
-COMMANDLINE_LIBRARY = LIBTECLA
 LDLIBS_LIBTECLA = -ltecla_r -lncurses
+LDLIBS_READLINE = -lreadline -lncurses
 
 #--------------------------------------------------
 # Allow site overrides

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -0,0 +1,27 @@
+#
+# $Id$
+# Author: W. Eric Norum
+#         Canadian Light Source
+#         eric@cls.usask.ca
+#
+# All RTEMS targets use the same Makefile fragment
+#
+RTEMS_TARGET_CPU = powerpc
+ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
+ARCH_DEP_CFLAGS += -DHAVE_PPCBUG
+
+MUNCH_SUFFIX = .boot
+MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
+define MUNCH_CMD
+	$(RTEMS_BASE)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< rtems
+	gzip -f9 rtems
+	$(RTEMS_BASE)/bin/$(LD_FOR_TARGET) -o $@ \
+		 $(PROJECT_RELEASE)/lib/bootloader.o \
+		--just-symbols=$< \
+		-b binary rtems.gz \
+		-T $(PROJECT_RELEASE)/lib/ppcboot.lds \
+		-Map $<.map
+	rm -f rtems.gz
+endef
+
+include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -0,0 +1,19 @@
+#
+# $Id$
+# Author: W. Eric Norum
+#         Advanced Photon Source
+#         norume@aps.anl.gov
+#
+# All RTEMS targets use the same Makefile fragment
+#
+RTEMS_TARGET_CPU = powerpc
+ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
+ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+
+MUNCH_SUFFIX = .boot
+MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
+define MUNCH_CMD
+	$(RTEMS_BASE)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
+endef
+
+include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386

@@ -7,6 +7,16 @@
 # All RTEMS targets use the same Makefile fragment
 #
 RTEMS_TARGET_CPU=i386
+
+MUNCH_SUFFIX = .boot
+MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
+define MUNCH_CMD
+	$(RTEMS_BASE)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
+	$(PROJECT_RELEASE)/build-tools/bin2boot $@ 0x00097E00 \
+		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
+	rm -f temp.bin
+endef
+
 include $(CONFIG)/os/CONFIG.Common.RTEMS
 
 #

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -0,0 +1,23 @@
+#
+# $Id$
+# Author: W. Eric Norum
+#         Canadian Light Source
+#         eric@cls.usask.ca
+#
+# All RTEMS targets use the same Makefile fragment
+#
+RTEMS_TARGET_CPU = m68k
+ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
+
+MUNCH_SUFFIX = .boot
+MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
+define MUNCH_CMD
+	$(RTEMS_BASE)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< $@
+endef
+
+include $(CONFIG)/os/CONFIG.Common.RTEMS
+
+#
+# Must put this one so it shows up after the -m528x
+#
+OP_SYS_LDFLAGS += -m5200

configure/os/CONFIG.Common.UnixCommon

@@ -16,6 +16,11 @@ VALID_BUILDS = Host Ioc
 # Gnu directory
 GNU_DIR = /usr/local
 
+#-------------------------------------------------------
+# Get fullpathname of relative dirs
+SHRLIB_SEARCH_FULLPATHDIRS = $(foreach dir,$(SHRLIB_SEARCH_DIRS), \
+  $(shell perl $(TOOLS)/fullPathName.pl $(dir)))
+
 #-------------------------------------------------------
 # Unix prefix and suffix definitions
 EXE =
@@ -24,6 +29,8 @@ OBJ = .o
 LIB_PREFIX = lib
 LIB_SUFFIX = .a
 SHRLIB_SUFFIX = .so$(addprefix .,$(SHRLIB_VERSION))
+LOADABLE_SHRLIB_SUFFIX = .so$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
+LOADABLE_SHRLIB_PREFIX = lib
 
 #-------------------------------------------------------
 #	names of libraries to build 
@@ -31,40 +38,60 @@ SHRLIB_SUFFIX = .so$(addprefix .,$(SHRLIB_VERSION))
 LIBNAME = $(BUILD_LIBRARY:%=$(LIB_PREFIX)%$(LIB_SUFFIX))
 # <lib> ->  lib<lib>.so.<version>
 SHRLIBNAME_YES = $(BUILD_LIBRARY:%=$(LIB_PREFIX)%$(SHRLIB_SUFFIX))
+LOADABLE_SHRLIBNAME = $(LOADABLE_BUILD_LIBRARY:%=$(LOADABLE_SHRLIB_PREFIX)%$(LOADABLE_SHRLIB_SUFFIX))
 
 #-------------------------------------------------------
 # shrlib: DEPLIBS, LDFLAGS, and LDLIBS definitions
-SHRLIB_DEPLIBS = $(foreach lib,$(SHRLIB_LIBS),$(firstword $(wildcard  \
-$($(lib)_DIR)/$(LIB_PREFIX)$(lib).*)))
 
-SHRLIB_LDFLAGS = $(SHRLIB_LDFLAGS_$(strip $(SHARED_LIBRARIES)))
-SHRLIB_LDLIBS = $($*_LDLIBS:%=-l%) $(SHRLIB_LIBS:%=-l%) \
- $($*_SYS_LIBS:%=-l%) $(SYS_SHRLIB_LIBS:%=-l%)
+# SHRLIB_LIBS deprecated
+LIB_LIBS += $(SHRLIB_LIBS)
+
+SHRLIB_DEPLIBS=$(foreach lib, $(LIB_LIBS) $(USR_LIBS), \
+	$(firstword $(wildcard $(addsuffix /$(LIB_PREFIX)$(lib).*, \
+    $($(lib)_DIR) $(SHRLIB_SEARCH_DIRS))) \
+	$(addsuffix /$(LIB_PREFIX)$(lib)$(LIB_SUFFIX), \
+    $(firstword $($(lib)_DIR) $(INSTALL_LIB)))))
+
+SHRLIB_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(LIB_LIBS) $(USR_LIBS) \
+ $($*_SYS_LIBS) $(LIB_SYS_LIBS) $(USR_SYS_LIBS)) $(LDLIBS)
 
 SHRLIB_DEPLIB_DIRS = $(dir $($*_DEPLIBS)) $(dir $(SHRLIB_DEPLIBS))
-SHRLIB_LDFLAGS += $(sort $(SHRLIB_DEPLIB_DIRS:%=-L%))
+SHRLIBDIR_LDFLAGS += $(sort $(SHRLIB_DEPLIB_DIRS:%=-L%))
 
-#--------------------------------------------------
+#-------------------------------------------------------
 # Prod: DEPLIBS, LDFLAGS, and LDLIBS definitions
-PROD_DEPLIBS = $(foreach lib,$(PROD_LIBS) $(USR_LIBS),$(firstword $(wildcard  \
-$($(lib)_DIR)/$(LIB_PREFIX)$(lib).*)))
 
-PROD_LDLIBS = $($*_LDLIBS:%=-l%) $(PROD_LIBS:%=-l%) $(USR_LIBS:%=-l%)\
- $($*_SYS_LIBS:%=-l%) $(SYS_PROD_LIBS:%=-l%)
+PROD_DEPLIBS=$(foreach lib,$(PROD_LIBS) $(USR_LIBS), \
+	$(firstword $(wildcard $(addsuffix /$(LIB_PREFIX)$(lib).*, \
+    $($(lib)_DIR) $(SHRLIB_SEARCH_DIRS))) \
+	$(addsuffix /$(LIB_PREFIX)$(lib)$(LIB_SUFFIX), \
+    $(firstword $($(lib)_DIR) $(INSTALL_LIB)))))
+
+PROD_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(PROD_LIBS) $(USR_LIBS)\
+ $($*_SYS_LIBS) $(PROD_SYS_LIBS) $(USR_SYS_LIBS))
+
+LDLIBS_STATIC_YES = LDLIBS
+LDLIBS_SHARED_NO = LDLIBS
+PROD_LDLIBS += $($(firstword $(LDLIBS_STATIC_$(STATIC_BUILD)) \
+               $(LDLIBS_SHARED_$(SHARED_LIBRARIES))))
 
 PROD_DEPLIB_DIRS = $(dir $($*_DEPLIBS)) $(dir $(PROD_DEPLIBS))
-PROD_LDFLAGS += $(sort $(PROD_DEPLIB_DIRS:%=-L%))
+PRODDIR_LDFLAGS += $(sort $(PROD_DEPLIB_DIRS:%=-L%))
+
+#--------------------------------------------------
+# Link definitions
+LINK.cpp = $(CCC) -o $@ $(STATIC_LDFLAGS) $(PRODDIR_LDFLAGS) $(LDFLAGS)
+LINK.cpp += $(PROD_LDFLAGS) $(PROD_LD_OBJS) $(PROD_LD_RESS) $(PROD_LDLIBS)
+LINK.shrlib = $(CCC) -o $@ $(SHRLIB_LDFLAGS) $(SHRLIBDIR_LDFLAGS) $(LDFLAGS)
+LINK.shrlib += $(LIB_LDFLAGS) $(LIBRARY_LD_OBJS) $(LIBRARY_LD_RESS) $(SHRLIB_LDLIBS)
+LINK.loadable_shrlib = $(CCC) -o $@ $(LOADABLE_SHRLIB_LDFLAGS) $(SHRLIBDIR_LDFLAGS) $(LDFLAGS)
+LINK.loadable_shrlib += $(LIB_LDFLAGS) $(LIBRARY_LD_OBJS) $(LIBRARY_LD_RESS) $(SHRLIB_LDLIBS)
 
 #--------------------------------------------------
 # Operating system definitions
 OP_SYS_CPPFLAGS += -DUNIX 
 OP_SYS_LDLIBS += -lm
 
-#--------------------------------------------------
-# Link definitions
-LINK.cpp = $(CCC) -o $@ $(STATIC_LDFLAGS) $(LDFLAGS) $(PROD_LD_OBJS) $(PROD_LD_RESS) $(LDLIBS)
-LINK.shrlib = $(CCC) -o $@ $(SHRLIB_LDFLAGS) $(LDFLAGS) $(LIBRARY_LD_OBJS) $(LIBRARY_LD_RESS) $(SHRLIB_LDLIBS)
-
 #--------------------------------------------------
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.UnixCommon

configure/os/CONFIG.Common.aix-ppc

@@ -0,0 +1,24 @@
+# CONFIG.Common.aix-ppc
+#
+# This file is maintained by the build community.
+#
+# Definitions for aix-ppc target builds
+# Sites may override these definitions in CONFIG_SITE.Common.aix-ppc
+#-------------------------------------------------------
+
+# Include definitions common to all Unix targets
+include $(CONFIG)/os/CONFIG.Common.UnixCommon
+
+#
+# Set OS-specific information
+#
+OS_CLASS = AIX
+ARCH_CLASS = ppc
+
+CODE_CPPFLAGS = -D_REENTRANT
+
+POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500 -D_ALL_SOURCE
+POSIX_LDLIBS = -lpthread
+
+#SHARED_LIBRARIES=NO
+

configure/os/CONFIG.Common.aix-ppc-gnu

@@ -0,0 +1,11 @@
+# CONFIG.Common.aix-ppc-gnu
+#
+# This file is maintained by the build community.
+#
+# Definitions for aix-ppc target builds
+# Sites may override these definitions in CONFIG_SITE.Common.aix-ppc
+#-------------------------------------------------------
+
+# Include definitions common to all aix-ppc  target archs
+include $(CONFIG)/os/CONFIG.Common.aix-ppc
+

configure/os/CONFIG.Common.cygwin-x86

@@ -0,0 +1,36 @@
+# CONFIG.Common.cygwin-x86
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86
+#-------------------------------------------------------
+
+# Include definitions common to all Unix targets
+include $(CONFIG)/os/CONFIG.Common.UnixCommon
+
+OS_CLASS = cygwin32
+ARCH_CLASS = x86
+
+EXE=.exe
+
+COMPILER_CPPFLAGS = -D_REENTRANT
+
+#POSIX_CPPFLAGS = -D_POSIX_SOURCE=199506L -D_POSIX_THREADS -D_POSIX_TIMERS
+# _POSIX_SOURCE eliminates select()
+POSIX_CPPFLAGS = -D_POSIX_THREADS -D_POSIX_TIMERS
+POSIX_LDLIBS += -lpthread
+
+ARCH_DEP_CPPFLAGS += -D_X86_
+
+OP_SYS_CPPFLAGS += -DCYGWIN32 -U_WIN32
+
+# Set runtime path for shared libraries
+RUNTIME_LDFLAGS = $(SHRLIB_SEARCH_FULLPATHDIRS:%=-Wl,-rpath,%)
+
+#  Definitions used when COMMANDLINE_LIBRARY is READLINE
+INCLUDES_READLINE = -I$(GNU_DIR)/include
+LDFLAGS_READLINE += -L$(GNU_DIR)/lib
+LDLIBS_READLINE = -lreadline
+

configure/os/CONFIG.Common.darwin-ppc

@@ -10,12 +10,15 @@
 # Include definitions common to all Unix targets
 include $(CONFIG)/os/CONFIG.Common.UnixCommon
 
+#
+# Set OS-specific information
+#
 OS_CLASS = Darwin
 ARCH_CLASS = ppc
 
 #
 # Special flags for Darwin
-#   No common blocks (as required when going to shared libraries)
+#   No common blocks (as required when using shared libraries)
 #
 OP_SYS_CFLAGS += -fno-common
 
@@ -25,23 +28,31 @@ OP_SYS_CFLAGS += -fno-common
 CPPSNCFLAGS += -no-cpp-precomp
 
 #
-# Need to get some fink-installed packages
+# Darwin os definition
 #
-OP_SYS_CPPFLAGS += -I$(FINK_DIR)/include
-OP_SYS_LDFLAGS += -L$(FINK_DIR)/lib
-OP_SYS_LDLIBS +=
+OP_SYS_CPPFLAGS += -Ddarwin
 
 #
-# Stuff that will be needed when going to shared libraries
+# The following two definitions enable the use of DarwinPorts packages.
+
 #
-SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)/$@ \
-       -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
-       -current_version $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
-SHRLIB_SUFFIX = $(addprefix .,$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)).dylib
-SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
+OP_SYS_INCLUDES += -I/opt/local/include
+# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
+OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /opt/local/lib/*))))
 
-#  Command-line input support
-COMMANDLINE_LIBRARY=LIBTECLA
-LDLIBS_LIBTECLA = -ltecla_r -lncurses
+#
+# The following two definitions enable the use of Fink packages.
+#
+OP_SYS_INCLUDES += -I/sw/include
+# dir/firstword/wildcard used to avoid warning -L: directory name (...) does not exist
+OP_SYS_LDFLAGS +=  $(addprefix -L,$(dir $(firstword $(wildcard /sw/lib/*))))
 
+#
+# Libraries for command-line editing.
+#
+LDLIBS_READLINE = -lreadline
+
+#
+# Command-line input support
+#
+COMMANDLINE_LIBRARY=READLINE

configure/os/CONFIG.Common.hpux-parisc

@@ -13,21 +13,19 @@ include $(CONFIG)/os/CONFIG.Common.UnixCommon
 OS_CLASS = hpux
 ARCH_CLASS = parisc
 
-POSIX_CPPFLAGS_YES = -D_POSIX_C_SOURCE=199506L -D_XOPEN_SOURCE=500
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_NO +=
-# When compiling with gcc, static builds need two more libraries (*sigh*)
-POSIX_LDLIBS_GNU_YES_STATIC_YES += -lpthread -l:libdld.sl
-POSIX_LDLIBS_YES = $(POSIX_LDLIBS_GNU_$(GNU)_STATIC_$(STATIC_BUILD))
+# Posix stuff is not set here as "-mt" (in CONFIG.hpux-parisc.hpux-parisc)
+# does all defines and linker options to make posix threads work
 
-OP_SYS_CPPFLAGS = -D_HPUX_SOURCE -DHP_UX
+OP_SYS_CPPFLAGS = -DHP_UX
+OP_SYS_CFLAGS = -D_HPUX_SOURCE 
+OP_SYS_CXXFLAGS =
 
-SHARED_LIBRARIES=YES
 SHRLIB_SUFFIX = .sl$(addprefix .,$(SHRLIB_VERSION))
+LOADABLE_SHRLIB_SUFFIX = .sl$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
 
-ifdef CROSS
-   GNU_TARGET=parisc-hp-unix
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
+# Set runtime path for shared libraries
+empty:=                                      # trick from the make docs...
+space:= $(empty) $(empty)
+RUNTIME_LDFLAGS = -Wl,+b$(subst $(space),:,$(sort $(SHRLIB_SEARCH_FULLPATHDIRS))),+s
 
+GNU_TARGET=parisc-hp-unix

configure/os/CONFIG.Common.linux-386

@@ -0,0 +1,18 @@
+# CONFIG.Common.linux-386
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-386 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-386
+#-------------------------------------------------------
+
+# Include definitions common to all linux x86 targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+
+ARCH_DEP_CFLAGS = -march=i386
+
+ifeq ($(BUILD_CLASS),CROSS)
+   GNU_TARGET=i386-pc-linux-gnu
+endif
+

configure/os/CONFIG.Common.linux-486

@@ -0,0 +1,18 @@
+# CONFIG.Common.linux-486
+#
+# $Id
+# This file is maintained by the build community.
+#
+# Definitions for linux-486 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-486
+#-------------------------------------------------------
+
+# Include definitions common to all linux x86 targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+
+ARCH_DEP_CFLAGS = -march=i486
+
+ifeq ($(BUILD_CLASS),CROSS)
+   GNU_TARGET=i486-pc-linux-gnu
+endif
+

configure/os/CONFIG.Common.linux-586

@@ -0,0 +1,19 @@
+# CONFIG.Common.linux-586
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-586 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-586
+#-------------------------------------------------------
+
+# Include definitions common to all linux x86 targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+
+# i586 is euivalent to pentiumpro
+ARCH_DEP_CFLAGS = -march=i586
+
+ifeq ($(BUILD_CLASS),CROSS)
+   GNU_TARGET=i586-pc-linux-gnu
+endif
+

configure/os/CONFIG.Common.linux-686

@@ -0,0 +1,19 @@
+# CONFIG.Common.linux-686
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-686 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-686
+#-------------------------------------------------------
+
+# Include definitions common to all linux x86 targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+
+# i686 is euivalent to pentiumpro
+ARCH_DEP_CFLAGS = -march=i686
+
+ifeq ($(BUILD_CLASS),CROSS)
+   GNU_TARGET=i686-pc-linux-gnu
+endif
+

configure/os/CONFIG.Common.linux-athlon

@@ -0,0 +1,19 @@
+# CONFIG.Common.linux-athlon
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-athlon target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-athlon
+#-------------------------------------------------------
+
+# Include definitions common to all linux x86 targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+
+ARCH_DEP_CFLAGS += -march=athlon-mp -mfpmath=sse
+
+
+ifeq ($(BUILD_CLASS),CROSS)
+   GNU_TARGET=athlon-pc-linux-gnu
+endif
+

configure/os/CONFIG.Common.linux-ppc

@@ -0,0 +1,18 @@
+# CONFIG.Common.linux-ppc
+#
+# This file is maintained by the build community.
+#
+# Definitions for linux-ppc target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-ppc
+#-------------------------------------------------------
+
+# Include definitions common to all Unix targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+#
+# Set OS-specific information
+#
+ARCH_CLASS = ppc
+
+ARCH_DEP_CPPFLAGS += -D_ppc_
+

configure/os/CONFIG.Common.linux-x86

@@ -7,40 +7,29 @@
 # Sites may override these definitions in CONFIG_SITE.Common.linux-x86
 #-------------------------------------------------------
 
-# Include definitions common to all Unix targets
-include $(CONFIG)/os/CONFIG.Common.UnixCommon
+# Include definitions common to all linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
 
-OS_CLASS = Linux
 ARCH_CLASS = x86
 
-CODE_CPPFLAGS = -D_REENTRANT
-
-POSIX_CPPFLAGS_YES = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_YES = -lpthread
-POSIX_LDLIBS_NO =
-
-# -D_BSD_SOURCE for gethostname() in unistd.h as needed by cacChannelIO.cpp.
-OP_SYS_CPPFLAGS += -D_BSD_SOURCE
-OP_SYS_CPPFLAGS += -Dlinux
-OP_SYS_LDFLAGS +=
-OP_SYS_LDLIBS += -lrt
-
 ARCH_DEP_CPPFLAGS += -D_X86_
-ARCH_DEP_CFLAGS += -mcpu=pentium
 
-# Set runtime path for shared libraries
-PROD_LDFLAGS_YES += $(sort $(SHRLIB_SEARCH_DIRS:%=-Wl,-rpath,%/lib/$(T_A)))
-SHRLIB_LDFLAGS_YES += $(sort $(SHRLIB_SEARCH_DIRS:%=-Wl,-rpath,%/lib/$(T_A)))
-PROD_LDFLAGS += $(PROD_LDFLAGS_$(SHARED_LIBRARIES))
-
-ifdef CROSS
+ifeq ($(BUILD_CLASS),CROSS)
+ifeq ($(EPICS_HOST_ARCH),linux-x86)
+   # Added for 386,486,... cross builds
+   CMPLR_PREFIX=
+   CROSS_INCLUDES=
+   CROSS_LDFLAGS=
+   # Use -w not -Wall
+   #WARN_CFLAGS_YES = -w
+   #WARN_CXXFLAGS_YES = -w
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86
+-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+-include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-x86
+else
    GNU_TARGET=i586-pc-linux-gnu
    CMPLR_SUFFIX=
    CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
 endif
-
-#Allow R3.13 built extensions to load R3.14 shared libs
-SYS_SHRLIB_LIBS += pthread rt
-
+endif
 

configure/os/CONFIG.Common.linux-x86-borland

@@ -0,0 +1,25 @@
+# CONFIG.Common.linux-x86-borland
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-x86 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-x86-borland
+#-------------------------------------------------------
+
+# Include definitions common to all Unix targets
+include $(CONFIG)/os/CONFIG.Common.UnixCommon
+
+OS_CLASS = Linux
+ARCH_CLASS = x86
+
+POSIX_LDLIBS = libpthread.so
+
+OP_SYS_CPPFLAGS += -D_BSD_SOURCE -D_SVID_SOURCE
+OP_SYS_CPPFLAGS += -Dlinux
+OP_SYS_LDLIBS = libc.so libm.so libdl.so librt.so
+
+ARCH_DEP_CPPFLAGS += -D_X86_
+
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(SHARED_LIBRARIES))
+

configure/os/CONFIG.Common.linux-x86-debug

@@ -0,0 +1,12 @@
+# CONFIG.Common.linux-x86-debug
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-x86 with debug compiler flags
+# Sites may override these definitions in CONFIG_SITE.Common.linux-x86-debug
+#-------------------------------------------------------
+
+# Include definitions common to all linux-x86  target archs
+include $(CONFIG)/os/CONFIG.Common.linux-x86
+

configure/os/CONFIG.Common.linux-x86_64

@@ -0,0 +1,35 @@
+# CONFIG.Common.linux-x86_64
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linux-x86_64
+#-------------------------------------------------------
+
+# Include definitions common to all linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = x86_64
+
+ARCH_DEP_CPPFLAGS += -D_X86_64_
+
+ifeq ($(BUILD_CLASS),CROSS)
+ifeq ($(EPICS_HOST_ARCH),linux-x86_64)
+   # Added for 386,486,... cross builds
+   CMPLR_PREFIX=
+   CROSS_INCLUDES=
+   CROSS_LDFLAGS=
+   # Use -w not -Wall
+   #WARN_CFLAGS_YES = -w
+   #WARN_CXXFLAGS_YES = -w
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86_64
+-include $(CONFIG)/os/CONFIG.linux-x86_64.linux-x86_64
+-include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.linux-x86_64
+else
+   GNU_TARGET=i586-pc-linux-gnu
+   CMPLR_SUFFIX=
+   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
+endif
+endif
+

configure/os/CONFIG.Common.linux-x86_64-debug

@@ -0,0 +1,12 @@
+# CONFIG.Common.linux-x86_64-debug
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-x86_64 with debug compiler flags
+# Sites may override these definitions in CONFIG_SITE.Common.linux-x86_64-debug
+#-------------------------------------------------------
+
+# Include definitions common to all linux-x86_64  target archs
+include $(CONFIG)/os/CONFIG.Common.linux-x86_64
+

configure/os/CONFIG.Common.linuxCommon

@@ -1,34 +1,30 @@
+# CONFIG.Common.linuxCommon
+#
 # $Id$
 # This file is maintained by the build community.
 #
-# Definitions for linux-mpc82xx target builds
-# Sites may override these definitions in CONFIG_SITE.Common.linux-mpc82xx
+# Definitions for linux target builds
+# Sites may override these definitions in CONFIG_SITE.Common.linuxCommon
 #-------------------------------------------------------
 
 # Include definitions common to all Unix targets
 include $(CONFIG)/os/CONFIG.Common.UnixCommon
 
 OS_CLASS = Linux
-ARCH_CLASS = mpc82xx
 
 CODE_CPPFLAGS = -D_REENTRANT
 
-POSIX_CPPFLAGS_YES = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_YES = -lpthread
-POSIX_LDLIBS_NO =
+POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500
+POSIX_LDLIBS = -lpthread
 
 # -D_BSD_SOURCE for gethostname() in unistd.h as needed by cacChannelIO.cpp.
 OP_SYS_CPPFLAGS += -D_BSD_SOURCE
 OP_SYS_CPPFLAGS += -Dlinux
-OP_SYS_LDFLAGS +=
-OP_SYS_LDLIBS = -lrt
+OP_SYS_LDLIBS += -lrt
 
-#ARCH_DEP_CPPFLAGS += -D_X86_
+# Set runtime path for shared libraries
+RUNTIME_LDFLAGS = $(SHRLIB_SEARCH_FULLPATHDIRS:%=-Wl,-rpath,%)
 
-ifdef CROSS
-   GNU_TARGET=ppc_82xx
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
+#  Definitions used when COMMANDLINE_LIBRARY is READLINE
+LDLIBS_READLINE = -lreadline -lcurses
 

configure/os/CONFIG.Common.lynxos-x86

@@ -1,31 +0,0 @@
-#  CONFIG.Common.lynxos-x86
-#
-# $Id$
-#
-#  This file is maintained by the build community.
-#  Sites may override these definitions in CONFIG_SITE.Common.lynxos-x86
-#-------------------------------------------------------
-
-#Include definitions common to unix targets
-include $(CONFIG)/os/CONFIG.Common.UnixCommon
-
-OS_CLASS = lynxos
-ARCH_CLASS = x86
-
-CODE_CPPFLAGS =
-
-POSIX_CPPFLAGS_YES =
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_YES += -lposix4d9 -lpthread
-POSIX_LDLIBS_NO +=
-
-ARCH_DEP_CPPFLAGS += -D_X86_
-ARCH_DEP_LDFLAGS =
-ARCH_DEP_LDLIBS =
-
-ifdef CROSS
-   GNU_TARGET=x86-lynxos
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
-

configure/os/CONFIG.Common.osf-alpha

@@ -1,31 +0,0 @@
-# CONFIG.Common.osf-alpha
-#
-# $Id$
-# This file is maintained by the build community.
-#
-# Definitions for osf-alpha target archs
-# Sites may override these definitions in CONFIG_SITE.Common.osf-alpha
-#-------------------------------------------------------
-
-# Include definitions common to all Unix targets
-include $(CONFIG)/os/CONFIG.Common.UnixCommon
-
-OS_CLASS = osf
-ARCH_CLASS = alpha
-
-CODE_CPPFLAGS =
-
-POSIX_CPPFLAGS_YES =
-POSIX_LDLIBS_YES +=
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_NO +=
-
-OP_SYS_CPPFLAGS = -D_OSF_SOURCE
-OP_SYS_LDLIBS +=
-
-ifdef CROSS
-   GNU_TARGET=alpha-osf
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
-

configure/os/CONFIG.Common.solaris-sparc

@@ -13,38 +13,36 @@ include $(CONFIG)/os/CONFIG.Common.UnixCommon
 OS_CLASS = solaris
 ARCH_CLASS = sparc
 
-CODE_CPPFLAGS = -D__EXTENSIONS__ 
+CODE_CPPFLAGS = -D__EXTENSIONS__
+
+COMPILER_CPPFLAGS += -mt
+COMPILER_LDFLAGS += -mt
 
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
-# Flags for solaris 6
-POSIX_CPPFLAGS_YES_6 += -D_REENTRANT
-POSIX_LDLIBS_YES_6 += -lthread
+POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_YES_$(SOLARIS_VERSION))
+POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
+POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_YES_$(SOLARIS_VERSION))
 
-POSIX_CPPFLAGS_YES += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_YES_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS_YES += -D_XOPEN_SOURCE=500
-POSIX_LDLIBS_YES += -lposix4 -lpthread $(POSIX_LDLIBS_YES_$(SOLARIS_VERSION))
+OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)
+OP_SYS_LDFLAGS +=  $(COMPILER_LDFLAGS)
 
-POSIX_CPPFLAGS_NO +=
-POSIX_LDLIBS_NO +=
+# Set runtime path for shared libraries
+RUNTIME_LDFLAGS = $(SHRLIB_SEARCH_FULLPATHDIRS:%=-R%)
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
+
+GNU_TARGET=sparc-sun-solaris2
 
-OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION)
-# socket and nsl needed by libca.a
 OP_SYS_LDLIBS += -lsocket -lnsl
+OP_SYS_LDLIBS_8 += -lCrun -lc -lCstd
+OP_SYS_LDLIBS_9 += -lCrun -lc -lCstd
+OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 
-#  -R does not work unless full path names are specified
-# use loader's -R option
-PROD_LDFLAGS += $(sort $(DEPLIB_DIRS:%=-R%))
-
-ifdef CROSS
-   GNU_TARGET=sparc-sun-solaris2
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
-
-# Lib for solaris 8
-SYS_SHRLIB_LIBS_8 += Crun
-
-#Allow R3.13 built extensions to load R3.14 shared libs
-SYS_SHRLIB_LIBS += posix4 pthread $(SYS_SHRLIB_LIBS_$(SOLARIS_VERSION))
+#  Definitions used when COMMANDLINE_LIBRARY is READLINE
+INCLUDES_READLINE = -I$(GNU_DIR)/include
+RUNTIME_LDFLAGS_READLINE += -R$(GNU_DIR)/lib
+LDFLAGS_READLINE += -L$(GNU_DIR)/lib
+LDLIBS_READLINE = -lreadline -lcurses
+# Use archive if there is a problem with the readline shared library
+#LDLIBS_READLINE = -Bstatic -lreadline -Bdynamic -lcurses
 

configure/os/CONFIG.Common.solaris-sparc-debug

@@ -0,0 +1,12 @@
+# CONFIG.Common.solaris-sparc-debug
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for solaris-sparc with debug compiler flags
+# Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc-debug
+#-------------------------------------------------------
+
+# Include definitions common to all solaris-sparc  target archs
+include $(CONFIG)/os/CONFIG.Common.solaris-sparc
+

configure/os/CONFIG.Common.solaris-sparc-gnu

@@ -9,4 +9,13 @@
 
 # Include definitions common to all solaris-sparc  target archs
 include $(CONFIG)/os/CONFIG.Common.solaris-sparc
+# CONFIG.Common.solaris-sparc
+
+COMPILER_CPPFLAGS =  -D_REENTRANT
+
+OP_SYS_LDLIBS_8 = -lc
+OP_SYS_LDLIBS_9 = -lc
+
+RUNTIME_LDFLAGS += -R$(GNU_LIB)
+OP_SYS_LDFLAGS += -L$(GNU_LIB)
 

configure/os/CONFIG.Common.solaris-sparc64

@@ -0,0 +1,15 @@
+# CONFIG.Common.solaris-sparc64
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for solaris-sparc64 compiler target archs
+# Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc64
+#-------------------------------------------------------
+
+# Include definitions common to all solaris-sparc target archs
+include $(CONFIG)/os/CONFIG.Common.solaris-sparc
+
+ARCH_DEP_CFLAGS += -xtarget=ultra -xarch=v9
+ARCH_DEP_CXXFLAGS += -xtarget=ultra -xarch=v9
+ARCH_DEP_LDFLAGS += -xtarget=ultra -xarch=v9

configure/os/CONFIG.Common.solaris-sparc64-gnu

@@ -0,0 +1,18 @@
+# CONFIG.Common.solaris-sparc64-gnu
+#
+# $Id$
+# This file is maintained by the build community.
+#
+# Definitions for solaris-sparc64 gnu compiler target archs
+# Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc64-gnu
+#-------------------------------------------------------
+
+# Include definitions common to all solaris-sparc-gnu  target archs
+include $(CONFIG)/os/CONFIG.Common.solaris-sparc-gnu
+
+ARCH_DEP_CFLAGS += -mcpu=v9 -m64
+ARCH_DEP_CXXFLAGS += -mcpu=v9 -m64
+ARCH_DEP_LDFLAGS += -mcpu=v9 -m64
+
+
+

configure/os/CONFIG.Common.solaris-x86

@@ -15,37 +15,35 @@ ARCH_CLASS = x86
 
 CODE_CPPFLAGS = -D__EXTENSIONS__
 
+COMPILER_CPPFLAGS += -mt
+COMPILER_LDFLAGS += -mt
+
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
-# Flags for solaris 6
-POSIX_CPPFLAGS_YES_6 += -D_REENTRANT
-POSIX_LDLIBS_YES_6 += -lthread
+POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_$(SOLARIS_VERSION))
+POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
+POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_$(SOLARIS_VERSION))
 
-POSIX_CPPFLAGS_YES += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_YES_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS_YES += -D_XOPEN_SOURCE=500
-POSIX_LDLIBS_YES += -lposix4 -lpthread $(POSIX_LDLIBS_YES_$(SOLARIS_VERSION))
-
-POSIX_CPPFLAGS_NO +=
-POSIX_LDLIBS_NO +=
-
-OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION)
+OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)
+OP_SYS_LDFLAGS +=  $(COMPILER_LDFLAGS)
 ARCH_DEP_CPPFLAGS = -D_X86_
-# socket and nsl needed by libca.a
+
+# Set runtime path for shared libraries
+RUNTIME_LDFLAGS = $(SHRLIB_SEARCH_FULLPATHDIRS:%=-R%)
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
+
+GNU_TARGET=x86-sun-solaris2
+
 OP_SYS_LDLIBS += -lsocket -lnsl
+OP_SYS_LDLIBS_8 += -lCrun -lc -lCstd
+OP_SYS_LDLIBS_9 += -lCrun -lc -lCstd
+OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 
-#  -R does not work unless full path names are specified
-# use loader's -R option
-#PROD_LDFLAGS += $(sort $(DEPLIB_DIRS:%=-R%))
-
-ifdef CROSS
-   GNU_TARGET=x86-sun-solaris2
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
-
-# Lib for solaris 8
-SYS_SHRLIB_LIBS_8 += Crun
-
-#Allow R3.13 built extensions to load R3.14 shared libs
-SYS_SHRLIB_LIBS += posix4 pthread $(SYS_SHRLIB_LIBS_$(SOLARIS_VERSION))
+#  Definitions used when COMMANDLINE_LIBRARY is READLINE
+INCLUDES_READLINE = -I$(GNU_DIR)/include
+RUNTIME_LDFLAGS_READLINE += -R$(GNU_DIR)/lib
+LDFLAGS_READLINE += -L$(GNU_DIR)/lib
+LDLIBS_READLINE = -lreadline -lcurses
+# Use archive if there is a problem with the readline shared library
+#LDLIBS_READLINE = -Bstatic -lreadline -Bdynamic -lcurses
 

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -10,3 +10,11 @@
 # Include definitions common to all solaris-x86  target archs
 include $(CONFIG)/os/CONFIG.Common.solaris-x86
 
+COMPILER_CPPFLAGS = -D_REENTRANT
+
+OP_SYS_LDLIBS_8 = -lc
+OP_SYS_LDLIBS_9 = -lc
+
+RUNTIME_LDFLAGS += -R$(GNU_LIB)
+OP_SYS_LDFLAGS += -L$(GNU_LIB)
+

configure/os/CONFIG.Common.sun4-x86

@@ -1,33 +0,0 @@
-# CONFIG.Common.sun4-x86
-#
-# $Id$
-# This file is maintained by the build community.
-#
-# Definitions for sun4-x86 target archs
-# Sites may override these definitions in CONFIG_SITE.Common.sun4-x86
-#-------------------------------------------------------
-
-# Include definitions common to all Unix target archs
-include $(CONFIG)/os/CONFIG.Common.UnixCommon
-
-OS_CLASS = sun4
-ARCH_CLASS = x86
-
-CODE_CPPFLAGS = -D__EXTENSIONS__
-
-POSIX_CPPFLAGS_YES = -D_POSIX_C_SOURCE=199506L -D_XOPEN_SOURCE=500
-POSIX_LDLIBS_YES += -lpthread -lthread
-POSIX_CPPFLAGS_NO =
-POSIX_LDLIBS_NO +=
-
-OP_SYS_CPPFLAGS = -DSUNOS4
-OP_SYS_LDLIBS += -lsocket -lnsl
-
-ARCH_DEP_CPPFLAGS += -D_X86_
-
-ifdef CROSS
-   GNU_TARGET=x86-sun-sunos4
-   CMPLR_SUFFIX=
-   CMPLR_PREFIX=$(addsuffix -,$(GNU_TARGET))
-endif
-

configure/os/CONFIG.Common.vxWorks-68040

@@ -19,3 +19,6 @@ ARCH_CLASS = 68k
 ARCH_DEP_CPPFLAGS = -DCPU=MC68040
 ARCH_DEP_CFLAGS = -m68040
 
+OPT_CFLAGS_YES = -O0
+
+GNU_TARGET = m68k-wrs-vxworks