Oops, off-by-one error...

- option to find() so it follow links
- use of strict
- handle comments correctly when parsing RELEASE

LICENSE

@@ -0,0 +1,84 @@
+Copyright (c) 1991-2004 University of Chicago and The Regents of the
+University of California. All rights reserved.
+
+EPICS BASE is distributed subject to the following license conditions:
+
+ SOFTWARE LICENSE AGREEMENT
+ Software: EPICS BASE
+ Versions: 3.13.7 and higher
+
+ 1. The "Software", below, refers to EPICS BASE (in either source code, or
+    binary form and accompanying documentation). Each licensee is
+    addressed as "you" or "Licensee."
+
+ 2. The copyright holders shown above and their third-party licensors
+    hereby grant Licensee a royalty-free nonexclusive license, subject to
+    the limitations stated herein and U.S. Government license rights.
+
+ 3. You may modify and make a copy or copies of the Software for use
+    within your organization, if you meet the following conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement.
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy.
+
+ 4. You may modify a copy or copies of the Software or any portion of it,
+    thus forming a work based on the Software, and distribute copies of
+    such work outside your organization, if you meet all of the following
+    conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement;
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy;
+      c. Modified copies and works based on the Software must carry
+         prominent notices stating that you changed specified portions of
+         the Software.
+
+ 5. Portions of the Software resulted from work developed under a U.S.
+    Government contract and are subject to the following license: the
+    Government is granted for itself and others acting on its behalf a
+    paid-up, nonexclusive, irrevocable worldwide license in this computer
+    software to reproduce, prepare derivative works, and perform publicly
+    and display publicly.
+
+ 6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+    OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
+    UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
+    EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+    BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+    FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME
+    ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
+    OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
+    SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE
+    OR THAT ANY ERRORS WILL BE CORRECTED.
+
+ 7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+    THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
+    OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
+    CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
+    INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY
+    REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF
+    CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR
+    OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE
+    POSSIBILITY OF SUCH LOSS OR DAMAGES.
+
+________________________________________________________________________
+
+This software is in part copyrighted by the BERLINER SPEICHERRING
+GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY), BERLIN, GERMANY.
+
+In no event shall BESSY be liable to any party for direct, indirect,
+special, incidental, or consequential damages arising out of the use of
+this software, its documentation, or any derivatives thereof, even if
+BESSY has been advised of the possibility of such damage.
+
+BESSY specifically disclaims any warranties, including, but not limited
+to, the implied warranties of merchantability, fitness for a particular
+purpose, and non-infringement.  This software is provided on an "as is"
+basis, and BESSY has no obligation to provide maintenance, support,
+updates, enhancements, or modifications.
+________________________________________________________________________
+

MakeRelease

@@ -9,78 +9,6 @@
 #
 #    [-b] - For fully built release
 #
-# $Log$
-# Revision 1.12  1997/07/23 14:46:55  jba
-# Added *bat files.
-#
-# Revision 1.11  1997/07/01 18:29:17  jba
-# Changed  Tar to tar in output filename.
-#
-# Revision 1.10  1997/01/17 19:59:37  jba
-# Use config/CONFIG_BASE_VERSION to get version info.
-#
-# Revision 1.9  1996/09/04 21:41:36  jba
-# Top level dir no longer passed to MakeRelease
-#
-# Revision 1.8  1996/07/02 13:45:09  jba
-# Added dbd and base/config dirs. Removed epics/config and base/rec.
-#
-# Revision 1.7  1996/06/25 21:54:42  jba
-# Command line parm now base dir
-#
-# Revision 1.6  1996/06/07 19:19:10  jba
-# MakeRelease is now in release tar file.
-#
-# Revision 1.5  1996/03/04 21:03:48  jba
-# epicsVersion.h now in src/include.
-#
-# Revision 1.4  1996/02/20 21:03:53  jba
-# Updated README files to reflect directory changes and new installEpics.
-#
-# Revision 1.3  1995/10/03  15:42:26  jba
-# Added *COPYRIGHT* files to release tar file.
-#
-# Revision 1.2  1995/08/28  15:49:54  jba
-# Added startup directory to release tar file
-#
-# Revision 1.1  1995/08/17  20:14:56  jba
-# Added base/tools scripts functionality to base/Makefile, removed scripts
-# Moved base/tools/MakeRelease to base dir.
-#
-# Revision 1.14  1994/12/19  18:42:08  tang
-# Make the args length compatible for HP and SUN.
-#
-# Revision 1.13  1994/12/15  19:19:18  tang
-# Replace -I opt by cat and xargs for tar for HP compatibility.
-#
-# Revision 1.12  1994/12/14  23:57:55  tang
-# Take out \< and \> pair for hp compatible
-#
-# Revision 1.11  1994/10/31  21:44:17  jba
-# Moved print stmnt, added cd $(EPICS)
-#
-# Revision 1.10  1994/10/05  18:29:34  jba
-# Renamed version.h to epicsVersion.h
-#
-# Revision 1.9  1994/09/22  01:41:47  mcn
-# MakeRelease - MAJOR bug fix.  GetVar / MakeDirs - minor fix.
-#
-# Revision 1.8  1994/09/07  20:59:15  mcn
-# Revamped GetVar, modified scripts for new GetVar.
-#
-# Revision 1.7  1994/09/02  20:58:00  mcn
-# minor change.
-#
-# Revision 1.6  1994/08/21  00:56:41  mcn
-# New Stuff
-#
-# Revision 1.5  1994/08/02  18:36:29  mcn
-# Support new configuration.
-#
-# Revision 1.4  1994/07/14  22:13:32  mcn
-# Now include SDR Makefile/Headers
-#
-#
 
 
 if [ ! -d src ]; then

Makefile

@@ -1,19 +1,54 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#
+# Top Level EPICS Makefile
+#        by Matthew Needes and Mike Bordua
+#
+#  Notes:
+#    The build, clean, install, and depends "commands" do not have
+#         their own dependency lists; they are instead handled by
+#         the build.%, clean.%, etc. dependencies.
+#
+#    However, the release dependencies DOES require a complete
+#         install because the release.% syntax is illegal.
 #
 # $Id$
 #
 
-TOP = .
-include $(TOP)/configure/CONFIG
+TOP=.
+include $(TOP)/config/CONFIG_BASE
 
-DIRS += config configure src
+DIRS = src config
 
-include $(TOP)/configure/RULES_TOP
+INSTALL_BIN = $(INSTALL_LOCATION)/bin/$(HOST_ARCH)
 
-release::
+#
+# this bootstraps in makeMakefile.pl (and others) so that it can
+# be used to create the first O.xxxx/Makefile
+#
+PERL_BOOTSTRAP_SCRIPTS = $(notdir $(wildcard $(TOP)/src/tools/*.pl))
+PERL_BOOTSTRAP_SCRIPTS_INSTALL = $(PERL_BOOTSTRAP_SCRIPTS:%=$(INSTALL_BIN)/%)
+all host cross inc rebuild clean depends buildInstall :: $(PERL_BOOTSTRAP_SCRIPTS_INSTALL)
+
+RMDIR=$(PERL) $(TOP)/src/tools/rm.pl -rf
+
+include $(TOP)/config/RULES_TOP
+
+release: 
 	@echo TOP: Creating Release...
-	@$(TOOLS)/MakeRelease
+	@./MakeRelease
 
-built_release::
+built_release:
 	@echo TOP: Creating Fully Built Release...
-	@$(TOOLS)/MakeRelease -b $(INSTALL_LOCATION)
-	
+	@./MakeRelease -b $(INSTALL_LOCATION)
+
+$(INSTALL_BIN)/%.pl: $(TOP)/src/tools/%.pl
+	$(PERL) $(TOP)/src/tools/installEpics.pl -d -m 555 $< $(INSTALL_BIN)
+

README

@@ -0,0 +1,290 @@
+$Id$
+
+----------------------------------------------------------------------------
+3.13 EPICS BASE Notes and Build Instructions.
+	- By Matthew Needes
+----------------------------------------------------------------------------
+
+Notes:
+
+1. Before you can build or use EPICS, the environemnt variable HOST_ARCH
+   must be set. The base/startup/HostArch script file has been provided
+   to set HOST_ARCH.
+
+2. You must use GNU make (which is now THE supported make utility) for
+   the build, gnumake.  Set your path so that a recent version (e.g.
+   V3.70) of gnumake is available.
+
+3. You must have perl installed. See the README.Perl in this directory. The
+   config files specify the perl full pathname  as /usr/bin/perl for
+   unix builds and C:\Perl\bin\perl for WIN95/NT builds. You can override
+   these specifications with a CONFIG_SITE_HOST_ARCH.<host_arch> file. 
+
+4. You may need vendors C and C++ compilers in your search path. (Check
+   the definitions of ACC and CCC in CONFIG.Host.<host_arch> or gnu GCC
+   and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified in CONFIG_SITE).
+
+4. For building base you must have echo in your search path. For unix host
+   builds you must also have ar, cp, rm, mv, ranlib, and mkdir in your search
+   path and /bin/chmod must exist. 
+
+----------------------------------------------------------------------------
+   Part 1 - Configuring and Building EPICS Base
+----------------------------------------------------------------------------
+
+1.1  To configure EPICS, edit the following file:
+
+   config/CONFIG_SITE      - Build choices/HOST_ARCH/Vx location.
+   config/CONFIG_SITE_ENV  - For site-specific environment settings
+
+   For a specific host architecture you may want to edit the following file 
+   config/CONFIG_SITE.Host.<arch>      - Override Host build settings for a host arch
+   config/CONFIG_SITE.Vx.<arch>        - Override Vx build settings for a host arch
+   config/CONFIG_SITE_HOST_ARCH.<arch> - Override build settings for a host arch
+ 
+   Optionally you may want to edit the following files 
+   config/CONFIG_SITE.Host - Override Host build settings for all host archs.
+   config/CONFIG_SITE.Vx   - Override Vx build settings for all host archs.
+   config/CONFIG           - Override build settings for all host archs.
+
+1.2  To add a target architecture to EPICS:
+
+   cd base/config
+   cp CONFIG.Vx.mv167 CONFIG.Vx.YOUR_ARCH
+   edit CONFIG.Vx.YOUR_ARCH   - For compiler flags / etc.
+
+   edit CONFIG_SITE    - Add architecture to CROSS_COMPILER_TARGET_ARCHS list.
+
+1.3  To build EPICS:
+
+   cd epics/base
+   gnumake             - To install include files, build and install EPICS.
+                         (Same as "gnumake inc install")
+   gnumake all         - Same as "gnumake"
+   gnumake clean       - To clean temporary object files.  Top level 
+                         clean will remove the O.ARCH dirs specified
+                         in BUILD_ARCHS.
+   gnumake uninstall   - Only available at the top level directory.
+                         Cleans directories created by the install.
+   gnumake rebuild     - Same as "gnumake clean all"
+
+1.4  "Partial" build commands:
+
+     The complete set of targets now supported are: 
+
+            action 
+            arch 
+            action.arch 
+            dir 
+            dir.action 
+            dir.arch 
+            dir.action.arch 
+
+      where: 
+            action can be clean, inc, install, depends, or build
+            action can also be uninstall or rebuild at top level only
+            dir is the name of a subdirectory. 
+            arch can be host, cross, sun4, solaris, mv167, ... 
+
+    Examples are:
+
+       gnumake inc              - To install include files
+       gnumake install.host     - To build and install EPICS for host arch.
+       gnumake install.cross    - To build and install EPICS for Vx archs.
+       gnumake clean.sun4       - Cleans sun4 binaries in O.sun4 dirs only.
+       gnumake install.sun4     - Builds sun4 only.
+       gnumake install.mv167    - Builds mv167 only (a HOST_ARCH build must
+                                  be complete before this can be issued).
+
+NOTES:
+
+   1. EPICS binaries and shell scripts are installed into the directory
+      $(INSTALL_LOCATION)/bin/ARCH.
+
+   2. EPICS libraries are installed into the $(INSTALL_LOCATION)/lib/ARCH
+      directory.
+
+   3. During a normal build (a "make" or "make install"), the "depends"
+      dependency will NOT be invoked.  Only if "make depends" is run
+      explicitly, or a "make built_release" is performed will dependencies
+      be generated automatically.
+   
+   4. Temporary objects are stored in src/DIR/O.ARCH, This allows objects
+      for multiple architectures to be maintained at the same time.
+      While developing source for EPICS, merely cd src/DIR/O.ARCH, and
+      invoke "make":
+
+      cd epics/base/src/db/O.mv167
+      make dbAccess.o
+
+      The above example instructs make to build dbAccess.o for the
+      mv167 target.
+
+----------------------------------------------------------------------------
+   Part 2  ---  Configuration Files in epics/base/config
+----------------------------------------------------------------------------
+CONFIG - This file is meant to be included in the low-level EPICS Makefiles.
+It includes the other EPICS makefiles, and allows individual developers
+and the EPICS system manager to override specific variables in the rest of
+the configuration.
+----------------------------------------------------------------------------
+CONFIG_SITE - This file is meant to be changed only by the EPICS system
+manager.  It specifies:
+
+	HOST_ARCH: The system's host architecture (sun4/hp700/etc).
+               This now come from an environment variable.
+	CROSS_COMPILER_HOST_ARCHS: List of unix architectures with cross_compilers. 
+	CROSS_COMPILER_TARGET_ARCHS: List of architectures to build epics for.
+	VX_DIR: Location of vxWorks.
+	STATIC_BUILD: Whether or not to build clients statically.
+	etc.
+
+----------------------------------------------------------------------------
+CONFIG.Host.ARCH - This file defines a particular host architecture.  It
+contains the following variables:
+
+ 	ARCH_CLASS: solaris / sun4 / hp700 / etc.
+        Host architecture OS vendor C and C++ complier variables.
+	Architecture dependent build flags.  The flag names / contents
+		depend on your architecture class.
+----------------------------------------------------------------------------
+CONFIG_HOST_ARCH.ARCH - This file contains the following variable:
+
+ 	WIND_HOST_TYPE: sun4-solaris2 / sun4-sunos4 /  x86-win32 / etc.
+----------------------------------------------------------------------------
+----------------------------------------------------------------------------
+CONFIG.Vx.ARCH - This file defines a particular target architecture.  It
+contains the following variables:
+
+ 	ARCH_CLASS: 68k / sun4 / hp700 / etc.
+	Architecture dependent build flags.  The flag names / contents
+		depend on your architecture class.
+	CMPLR_SUFFIX: Vx GNU cross compiler suffix definition. 
+----------------------------------------------------------------------------
+----------------------------------------------------------------------------
+CONFIG_SITE.BUILD_TYPE.ARCH - Contains site specific definitions pertaining to a
+particular architecture and build type.  This file's primary usefulness is to
+define site specific compile and link flags.
+----------------------------------------------------------------------------
+CONFIG_COMMON - Contains definitions describing the layout of base 
+	and definitions common to all builds.
+----------------------------------------------------------------------------
+CONFIG.Host.UnixCommon - Contains host definitions common to all Unix archs.
+----------------------------------------------------------------------------
+CONFIG_BASE -  Defines what subdirectories get built by default under base.
+----------------------------------------------------------------------------
+CONFIG_BASE_VERSION - Defines the version of base. 
+----------------------------------------------------------------------------
+CONFIG_ENV - EPICS Environment Parameter configuration file.
+----------------------------------------------------------------------------
+CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
+----------------------------------------------------------------------------
+RULES.Vx - Rules for building with Makefile.Vx makefiles.
+----------------------------------------------------------------------------
+RULES.Host - Rules for building with Makefile.Host makefiles.
+----------------------------------------------------------------------------
+RULES_TOP - Top level rules for building.
+----------------------------------------------------------------------------
+RULES_ARCHS
+RULES_DIRS - Allows top-level type command syntax in low-level directories.
+----------------------------------------------------------------------------
+
+    Table of files to change when building and adding architectures.
+	etc.
+
+Filename                  SYS_MGR  ADD_VX_ARCH  ADD_UNIX_ARCH  DEVELOPER
+
+CONFIG                       m         -             -             m
+CONFIG_SITE                  m         m             m             -
+CONFIG_SITE_ENV              m         -             -             -
+CONFIG.Host.ARCH             -         c             c             -
+CONFIG_HOST_ARCH.ARCH        -         c             c             -
+CONFIG_SITE.Host.ARCH        -         -             -             -
+CONFIG.Vx.ARCH               -         c             c             -
+CONFIG_SITE.ARCH             -         c             c             -
+CONFIG.Vx.ARCH_CLASS         -         c*            -             -
+RULES.Vx                     -         -             -             -
+RULES.Host                   -         -             -             -
+CONFIG_BASE                  -         -             -             -
+CONFIG_BASE_VERSION          -         -             -             -
+CONFIG_COMMON                -         -             -             -
+CONFIG_ENV                   -         -             -             -
+RULES_ARCHS                  -         -             -             -
+RULES_DIRS                   -         -             -             -
+RULES_TOP                    -         -             -             -
+
+     m -  Modify an existing file.
+     c -  Create a new file.
+
+     * -  Create an ARCH_CLASS file only if you are adding a
+             fundamentally new architecture, such as hp700 or
+             a SPARC VME board.  If your board is 68k based,
+             you will not need to create CONFIG.Vx.68k,
+             since it already exists !
+
+----------------------------------------------------------------------------
+   Part 3  ---  Configuration File Inclusion Tree Examples
+----------------------------------------------------------------------------
+----------------------------  hkv2f example --------------------------------
+            (files are numbered in the order of their inclusion)
+
+ src/db/Makefile.Vx     (An example EPICS makefile)
+    ^   ^
+    |   +--- 2.  RULES.Vx
+    |              Default rules.
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                  ^^^^^^^
+                  ||||||+- 1. CONFIG_COMMON
+                  ||||||          General info about base.
+                  |||||+-- 2. CONFIG_BASE_VERSION
+                  |||||           Base version.
+                  ||||+--- 3. CONFIG_SITE
+                  ||||             HOST_ARCH = sun4
+                  ||||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                  ||||             VX_DIR = /vxworks
+                  ||||             More.
+                  |||+---- 4. CONFIG_HOST_ARCH.sun4
+                  |||              WIND_HOST_TYPE =  sun4-sunos4
+                  ||+----- 5. CONFIG.Vx
+                  ||               Definitions for Vx builds 
+                  |+------ 6. CONFIG.Vx.hkv2f
+                  |                ARCH_CLASS = 68k 
+                  |                Arch Specific Compiler Flag Setup
+                  |                Vx GNU cross compiler suffix
+                  +------- 7. CONFIG_SITE.Vx.hkv2f
+                                   Site Specific setup 
+
+----------------------------  sun4  example --------------------------------
+            (files are numbered in the order of their inclusion)
+
+ src/db/Makefile.Unix   (An example EPICS makefile)
+    ^   ^
+    |   +--- 2.  RULES.Vx
+    |              Default rules.
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                   ^^^^^
+                   |||||+- 1. CONFIG_COMMON
+                   |||||          General info about base.
+                   ||||+-- 2. CONFIG_BASE_VERSION
+                   ||||           Base version.
+                   |||+--- 3. CONFIG_SITE
+                   |||             HOST_ARCH = sun4
+                   |||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                   |||             VX_DIR = /vxworks
+                   |||             More.
+                   ||+---- 4. CONFIG_HOST_ARCH.sun4
+                   ||              WIND_HOST_TYPE =  sun4-sunos4
+                   |+----- 5. CONFIG.Host.sun4
+                   |               ARCH_CLASS = sun4 
+                   |               Arch Specific Compiler Flag Setup
+                   |               Vx GNU cross compiler suffix
+                   +------ 6. CONFIG_SITE.Host.sun4
+                                   Site Specific setup 
+
+

README.Linux

@@ -0,0 +1,17 @@
+                     Special Notes on Linux
+
+At this point, support for Linux only involves channel access
+clients.  Since Vxworks is not available for Linux, you must
+use other platforms for developing server side code.
+
+You MUST start caRepeater by hand before running a client.  
+Prior to running a client, you must run:
+
+caRepeater &
+
+---
+jpq@nwu.edu
+
+
+
+

README.Perl

@@ -0,0 +1,44 @@
+Perl
+====
+
+A number of shell scripts are now Perl scripts,
+most important:
+
+tools/installEpics.pl
+include/makeEpicsVersion.pl
+libCom/bldEnvData.pl
+libCom/makeStatTbl.pl
+sequencer/makeVersion.pl
+
+WIN32 also uses
+tools/cp.pl, mv.pl, rm.pl, mkdir.pl
+which should behave like the UNIX cp, mv, rm, rmdir.
+All systems could use the Perl versions but that seems
+to be overkill for UNIX.
+
+Advantages:
+* no need for ls, date, basename, grep, awk, sed, ...,
+  which made the make UNIX-specific.
+* Perl is currently available for Unix, OS/2, WIN32, VMS
+  and the scripts should work on all those systems
+
+Disadvantage:
+* You have to get Perl, look e.g. at http://www.perl.com
+* Perl version 5.003_02 works, we don't know about earlier versions.
+
+
+Compile Perl:
+No big deal,
+* on UNIX say 'configure' and 'gnumake',
+* on Windows use MX Visual C++,
+  use File/Open Workspace to open the Makefile {PERL}/perl5i.mak,
+  use Build/Batch build to select eiher the Release or Debug targets.
+
+  You can do the same with the Makefile {Perl}/Ext/WIN32/win32.mak
+  - nice tools but not necessary for EPICS.
+
+  Then call {PERL}/bin/perlw32-install.bat
+
+In any case, read the texts that come with perl!
+
+

README.WIN32

@@ -25,10 +25,6 @@ Right now this port of EPICS to WIN32 should allow you to
   and all other EPICS base libraries as DLLs.
 * build gdd, cas and a demo of the new portable CA server on WIN32.
 
-To build only for WIN32 and not cross compile for IOC development type 
-"make host" or in your config files set "CROSS_COMPILER_HOST_ARCHS=void"
-
-
 1) see what you have
 --------------------
 
@@ -51,28 +47,19 @@ If you cannot/don't want to find them, contact me, please!
 (Setting env. vars. is different: for NT, use Settings/System,
 for Win95 use autoexec.bat)
 
-When setting paths in the EPICS CONFIG files for WIN32 the following
-are hints in case you have trouble. You should not need to worry about 
-this unless you type a path into one of the EPICS config files that 
-includes a "\". In most situations gnu make, windows NT, the MS compiler,
-and the MS linker will accept "/" and this will result in less trouble.
+When setting paths in the EPICS CONFIG files for WIN32:
 
-	** Note that that each "\" in any path variables you set
+	** Note that that each "\" in any path variables
 		must be replaced with a "\\" (this is because GNU make treats
 		all "\" characters as line continuation)
 
 	** Note that that each space in any file name or 
-        path name variable you set must be replaced with 
+        path name variable must be replaced with 
         a "\ " (this is because GNU make treats all " " separated
         input as independent tokens in the input stream.
 
 	** WIN32 will generally allow "/" and "\" interchangeably in file paths,
-		but the DOS shell only accepts "\".
-
-    ** Certain command line utilities such as the MS linker are known to in rare
-        situations confuse "/" in a path with command line options, and it may
-        be necessary to replace a "/" in a path that configured with "\\", but
-        the bulk of our experience indicates that this is not the necessary.
+		but the DOS shell appears to only accept "\".
 
 Your path should include:
 - The EPICS-binaries that we are about to build in <EPICS>base/bin/WIN32
@@ -182,13 +169,13 @@ style project. This allows EPICS programs to be developed directly inside of
 the visual C++ environment. To do this create a "makefile" project and place your 
 gnu make command in the build configuration (accessed from the project/settings menu). 
 You will also need to add GNU make and <EPICS>/bin/win32 into the Visual C++ 
-executable search path (from the tools/options menu). 
-In visual C++ it is possible to double click on the compiler 
+executable search path (from the tools/options menu). I have not so far determined 
+how to configure visual C++ so that it is possible to double click on the compiler 
 error messages generated within an EPICS "makefile" style project and have visual 
-C++ immediately position the cursor on the corresponding line in the source. I
-have found that this works correctly with Makefile projects if the project is in a 
-directory just below the source code. The following build command works well
-in a visual C++ make file project: "kill caRepeater.exe&make -C ..". Be careful 
-not to introduce additional spaces around the &. The kill.exe command is in the
-NT resource kit.
+C++ immediately position the cursor on the corresponding line in the source (as is 
+normally the case in the visual C++ environment). If you solve this problem please 
+forward the details to johill@lanl.gov.
 
+Good luck !
+
+-Kay

README.cygwin32

@@ -0,0 +1,54 @@
+Compiling EPICS on cygwin32 (Windows95/NT)
+------------------------------------------
+
+Right now this port of EPICS base to cygwin32 R1.3.3 fails
+because cygwin does not yet support point-to-point interfaces.
+ 
+To build EPICS on Win95 or NT using cygwin32, we need
+
+        EPICS base distribution, R3.12.0.beta12 or later, available
+           from http://aps.anl.gov/...
+        The latest cygwin distribution, available from 
+           http://www.cygwin.com
+
+BUILD INSTRUCTIONS
+------------------
+
+
+1) Install the cygwin binary release
+------------------------------------
+
+2) Install the epics base distribution
+--------------------------------------
+        cp <dirname>\<basereleasename>.tar.gz .
+        gunzip -d <basereleasename>.tar.gz
+        tar xvf <basereleasename>.tar
+        chmod +w -R *
+        cd <epicsBaseDir>
+
+3) Set environment variables and path using cygwin32.bat
+-------------------------------------------------------------
+        <edit <epicsBaseDir>/startup/cygwin32.bat changing paths if necessary>
+        cd <epicsBaseDir>\startup
+        edit cygwin32.bat
+        <execute cygwin32.bat>
+         cygwin
+
+4) Set site specific parms in epics config files
+------------------------------------------------
+	cd <epicsBaseDir>\config
+	<edit CONFIG_SITE* files>
+
+5) Build epics base
+-------------------
+        cd <epicsBaseDir>
+        make
+
+6) Create an example EPICS application (<epicsBaseDir> needs drive letter)
+--------------------------------------------------------------------------
+        mkdir <epicsappdir>
+        cd <epicsappdir>
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -l
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -t example example
+        make
+

README.hp700_alpha

@@ -0,0 +1,28 @@
+#
+# supplement README for HP700 
+#
+# Johnny Tang  5-29-97
+#
+
+1. VxWorks 5.2 for HP-UX
+
+   - Make sure that you have set VX_DIR and VX_GNU to your
+     VxWorks root directory. 
+
+   - Under $(VX_DIR), create a soft link:
+     hp700.68k -> hp9700.68k
+
+2. Modify base/config/CONFIG_SITE file
+
+   - ANSI=HPACC
+   - STANDARD=HPCC
+   - CPLUSPLUS=G++
+
+3. HP native c++ compiler has problem to handle the head files
+   in which a inline function is used in conjuction with template
+
+   base/src/cas, the portable CA server can't be compiled successfully
+   because of the above limitation.
+
+   This problem can be resolved by spliting the function declarations
+   from the inline code in the files in base/src/cxxTemplates.

README.solaris

@@ -0,0 +1,25 @@
+----------------------------------------------------------------------------
+EPICS Notes for Solaris
+	- By Andrew Johnson
+
+updated 12-16-96 by Jeff Hill
+
+----------------------------------------------------------------------------
+
+Notes:
+
+1. In order to build EPICS under Solaris 2, you must ensure that the
+solaris directory /usr/ccs/bin is in your search path.
+
+2. It is now possible to compile EPICS under Solaris 2 using either the
+GNU gcc compiler or the Sun SPARCworks ANSI C compiler. The g++/
+Sun SPARCworks ANSI C compiler combination has compiled and linked
+without errors but has not been extensively tested.
+
+3. EPICS under Solaris 2 no longer uses the UCB compatability libraries.
+In order to ensure that the /usr/ucblib files are not inherited, you
+should ensure that your LD_LIBRARY_PATH environment variable does not
+include /usr/ucblib when you build any of the host tools.
+
+--
+anj@ast.cam.ac.uk

config.hkv2f.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mk

@@ -1 +0,0 @@
-BUILD_ARCHS=sun4 mv167 mv147

config.mv147.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mv167.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.sun4.mk

@@ -1,13 +0,0 @@
-BUILD_TYPE = Unix
-DIRS =	src/libCom \
-	src/db \
-	src/ca \
-	src/toolsComm/antelope \
-	src/toolsComm/flex \
-	src/as \
-	src/bld \
-	src/dct \
-	src/util \
-	src/sequencer \
-	src/dbtools \
-	rec

config/CONFIG

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/CONFIG.Host.Borland

@@ -1,10 +1,10 @@
 # CONFIG.Host.Borland
-#
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.Borland
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
+BORLAND_LIB = $(BORLAND)\\lib
+BORLAND_INC = $(BORLAND)\\include
+BORLAND_BIN = $(BORLAND)\\bin
 
 #
 #
@@ -12,38 +12,61 @@ ANSI = ACC
 CPLUSPLUS = CCC
 
 #
-#
-WINLINK = ilink32
+# -q supress command line banner
+WINLINK = $(BORLAND_BIN)/ilink32 -q
 
-RCCMD = brcc32 -i . -i .. -i $(INSTALL_INCLUDE) -i $(EPICS_BASE_INCLUDE) -fo $@ $<
+# -l specifies default language
+# -fo Renames the output .RES file
+RCCMD = $(BORLAND_BIN)/brcc32 $(subst -I,-i,$(INCLUDES)) -l0x409  -fo$@ $<
 
-ARCMD = tlib $@
+ARCMD = $(BORLAND_BIN)/tlib $@
 
 #
-# Configure OS vendor C compiler
-CCLINKOPT = -WM -D_WIN32
-ACC = bcc32 $(CCLINKOPT)
+# Configure Borland C compiler
+# -q suppress compiler identification banner
+# -tWM generate a 32-bit multi-threaded target
+# -tWD generate a .DLL executable
+# -a8 quad word alignment
+# -D_WIN32 macro defined to be consistant with Microsoft Visual C++
+# -D_RTLDLL macro defined to use Borland C++ RTL library
+CCLINKOPT = -q -tWM -tWD -a8 -D_WIN32 -D_RTLDLL
+ACC = $(BORLAND_BIN)/bcc32 $(CCLINKOPT)
 
 #
-# __STDC__=0 is a real great idea of Jeff that gives us both:
-# 1) define STDC for EPICS code (pretend ANSI conformance)
-# 2) set it to 0 to use MS C "extensions" (open for _open etc.)
-# because MS uses:   if __STDC__ ... disable many nice things
+# __STDC__=0 works but not as cleanly as with
+# Microsoft Visual C++.
+# The Borland header files use ifdef __STDC__ 
+# to disable many nice things. This is overridden
+# by defining NO_BORLAND_STDC in the Makefile.Host.
 #
+ifdef NO_BORLAND_STDC
+ACC_ANSI = $(ACC)
+ACC_STRICT = $(ACC)
+else
 ACC_ANSI = $(ACC) -D__STDC__=0
 ACC_STRICT = $(ACC) -D__STDC__=0
-ACC_TRAD = $(ACC) /nologo
+endif
+ACC_TRAD = $(ACC)
 
-#
-ACC_WARN_YES = -w -g0
+# -w display warnings on
+# -g0 no limit to warning messages
+# some warning message here are always disabled because they are 
+# trivial and numerous 
+# -w-8012 Comparing signed and unsigned values
+# -w-8060 Possibly incorrect assignment
+# -w-8071 Conversion may lose significant digits
+ACC_WARN_YES = -w -g0 -w-8012 -w-8060 -w-8071
+# -w- display warnings off
 ACC_WARN_NO =  -w-
 
 #
-# -O1 optimization for size
 # -k- turn off standard stack frame
-# -H- Turn off precompiled headers
-# -R- Don't include browser info in .obj files
-ACC_OPT_YES = -k- -H- -R- -O1
+# -H- turn off precompiled headers
+# -R- don't include browser info in .obj files
+# -O1 optimization for size
+# -v- turn off source debugging
+# -vi control expansion of inline functions
+ACC_OPT_YES = -k- -H- -R- -O1 -v- -vi
 
 #
 ACC_OPT_NO = 
@@ -57,26 +80,39 @@ ACC_SLIBS_NO=
 
 # Configure OS vendor C++ compiler
 #
-# __STDC__=0 is a real great idea of Jeff that gives us both:
-# 1) define STDC for EPICS code (pretend ANSI conformance)
-# 2) set it to 0 to use MS C "extensions" (open for _open etc.)
-# because MS uses:   if __STDC__ ... disable many nice things
+# __STDC__=0 works but not as cleanly as with
+# Microsoft Visual C++.
+# The Borland header files use ifdef __STDC__ 
+# to disable many nice things. This is overridden
+# by defining NO_BORLAND_STDC in the Makefile.Host.
 #
-CCC = bcc32 $(CCLINKOPT)
+CCC = $(BORLAND_BIN)/bcc32 $(CCLINKOPT)
+ifdef NO_BORLAND_STDC
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+else
 CCC_NORMAL = $(CCC) -D__STDC__=0
 CCC_STRICT = $(CCC) -D__STDC__=0
+endif
 CCC_TEMPL_INST_FLAG =
 
-#
-CCC_WARN_YES = -w -g0
+# -w display warnings on
+# -g0 no limit to warning messages
+# -w-8012 Comparing signed and unsigned values
+# -w-8060 Possibly incorrect assignment
+# -w-8071 Conversion may lose significant digits
+CCC_WARN_YES = -w -g0 -w-8012 -w-8060 -w-8071 -w-8008 -w-8027 -w-8066 -w-8080 -w-8004
+# -w- display warnings off
 CCC_WARN_NO = -w-
 
 #
-# -O1 optimization for size
 # -k- turn off standard stack frame
 # -H- Turn off precompiled headers
 # -R- Don't include browser info in .obj files
-CCC_OPT_YES = -k- -H- -R- -O1
+# -O1 optimization for size
+# -v- turn off source debugging
+# -vi control expansion of inline functions
+CCC_OPT_YES = -k- -H- -R- -O1 -v- -vi
 
 #
 CCC_OPT_NO = 
@@ -88,16 +124,15 @@ CCC_SLIBS_YES=
 CCC_SLIBS_NO=
 
 PROD_VERSION=3.13
-# -w display warnings on
-# -C clear state before linking
-# -Gn no state files
-# -x no map
-# -Gi generate import library
-# -Tpd this flag specifies the output file type
-# -aa this flag specifies the application type
 # -c case sensitive linking
-LINK_OPT_FLAGS_YES = -w -C -Gn -x -Gi -Tpd -aa -c 
-LINK_OPT_FLAGS_NO = -w- -C -Gn -x -Gi -Tpd -aa -c 
+# -C clear state before linking
+# -Gi generate import library
+# -Gn no state files
+# -Tpd targets a Windows .DLL file
+# -x no map
+# -w display warnings on
+LINK_OPT_FLAGS_YES = -c -C -Gi -Gn -Tpd -x -w
+LINK_OPT_FLAGS_NO = -c -C -Gi -Gn -Tpd -x -w-
 WIN32_DLLFLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
 OPT_LDFLAGS = 
 
@@ -111,6 +146,7 @@ ARCH_CLASS=WIN32
 
 #	ifdef WIN32   looks better that  ifeq ($(ARCH_CLASS),WIN32)  ??
 WIN32=1
+BORLANDC=1
 
 EXE=.exe
 OBJ=.obj
@@ -118,7 +154,7 @@ RES=.res
 
 #       Problem: BorlandC does not recognize  *.cc as C++ source,
 #       we have to compile xx.cc  using the flag -P xx.cc,
-SOURCE_CXXFLAG = -P
+SOURCE_CXXFLAG = -P -D__cplusplus
 
 #	Operating system flags 
 OP_SYS_CFLAGS =
@@ -126,13 +162,14 @@ OP_SYS_CFLAGS =
 #
 # Borland specific include files
 #
-OP_SYS_INCLUDES = -I$(INCLUDE)
+OP_SYS_INCLUDES = -I$(BORLAND_INC)
 #
 OP_SYS_LDLIBS =
 
 #
 # specify dll .def file only if it exists
 #
+#DLL_DEF_FLAG = $(addprefix /def:,$(wildcard ../$(LIBRARY).def))
 DLL_DEF_FLAG = $(subst /,\\,$(wildcard ../$(LIBRARY).def))
 
 #	HOST_OPT_FLAGS is part of CFLAGS/CXXFLAGS,
@@ -152,7 +189,7 @@ HOST_OPT_FLAGS += $(subst $@, /_WINDLL, $(findstring $@,$(LIBOBJS)))
 #	x.lib: what you link to progs that use the dll (LIBNAME)
 #	x.exp: what you need to build the dll (in no variable)
 #
-LINK.shrlib = $(WINLINK) $(WIN32_DLLFLAGS) -L$(LIB) -L$(LIB)\\Psdk c0d32.obj 
+LINK.shrlib = $(WINLINK) $(WIN32_DLLFLAGS) -L$(BORLAND_LIB) -L$(BORLAND_LIB)\\Psdk c0d32.obj
 
 #	adjust names of libraries to build
 #
@@ -171,7 +208,12 @@ SHRLIBNAME = $(LIBRARY).dll
 #
 DLL_LINK_LIBNAME_YES = $(LIBRARY).lib
 DLL_LINK_LIBNAME = $(DLL_LINK_LIBNAME_$(SHARED_LIBRARIES))
+
+#ifeq ($(strip $(SHARED_LIBRARIES)),NO)
+#LIBNAME = $(LIBRARY).lib
+#else
 LIBNAME = $(LIBRARY)Obj.lib
+#endif
 
 #	dll install location
 INSTALL_SHRLIB = $(INSTALL_BIN)
@@ -181,6 +223,7 @@ INSTALL_SHRLIB = $(INSTALL_BIN)
 OBJECT_LIB_EXT_YES = Obj.lib # object library extension for static build
 OBJECT_LIB_EXT_NO = .lib # object library extension for dynamic build
 OBJECT_LIB_EXT = $(OBJECT_LIB_EXT_$(STATIC_BUILD))
+
 COND_PROD_DEPLIBS = $(foreach prod,$(PROD), $(foreach lib, $($(basename $(prod))_LIBS),\
  $(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT)))
 PRODNAME_DEPLIBS = $(foreach lib,$(PRODNAME_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(lib).lib $($(lib)_DIR)/$(lib)Obj.lib $(EPICS_BASE_LIB)/$(lib).lib $(EPICS_BASE_LIB)/$(lib)Obj.lib ) $(filter $(LIBRARY)$(OBJECT_LIB_EXT), $(lib)$(OBJECT_LIB_EXT)) ))
@@ -190,7 +233,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(l
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with
@@ -201,18 +244,18 @@ USR_LDLIBS = $(PRODNAME_DEPLIBS) $(PROD_DEPLIBS) $(USR_DEPLIBS) $(SYS_PROD_LIBS:
 
 DLL_LDLIBS = $(DLL_DEPLIBS) $(SYS_PROD_LIBS:%=%.lib) $(OP_SYS_LDLIBS)
 
-#multithreaded
-LIBSUF=mt
-# -w display warnings on
+#multithreaded import library
+LIBSUF=mti
+# -c case sensitive linking
 # -C clear state before linking
 # -Gn no state files
+# -Tpe targets a Windows .EXE file
 # -x no map
-# -c case sensitive linking
-LDFLAGS += -w -C -Gn -x -c -L$(LIB) -L$(LIB)\\Psdk
+# -w display warnings on
+LDFLAGS += -c -C -Gn -Tpe -x -w -L$(BORLAND_LIB) -L$(BORLAND_LIB)\\Psdk
 LINKSTARTUP = c0x32.obj
 LINKLIBS=import32.lib cw32$(LIBSUF).lib
 
 LINK.c = $(WINLINK) $(LDFLAGS) $(LINKSTARTUP)
 LINK.cc = $(WINLINK) $(LDFLAGS) $(LINKSTARTUP)
 
-

config/CONFIG.Host.Linux

@@ -26,7 +26,7 @@ ACC_WARN_YES =  -Wall
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
+ACC_SFLAGS_YES = -static
 ACC_SFLAGS_NO=
 ACC_SLIBS_YES =
 ACC_SLIBS_NO=
@@ -43,7 +43,7 @@ CCC_WARN_YES =  -Wall
 CCC_WARN_NO =
 CCC_OPT_YES =  -O
 CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
+CCC_SFLAGS_YES = -static
 CCC_SFLAGS_NO=
 CCC_SLIBS_YES =
 CCC_SLIBS_NO=
@@ -60,7 +60,7 @@ G++_STRICT = $(G++)  -Wtraditional
 
 #ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -D_USE_BSD
 ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
-ARCH_DEP_LDFLAGS += -lpthread
+ARCH_DEP_LDFLAGS =
 
 #glibc FAQ
 #	"_GNU_SOURCE:  glibc does not make the GNU extensions available 

config/CONFIG.Host.LynxOS

@@ -1,56 +0,0 @@
-# CONFIG.Host.LynxOS
-#
-#  This file is maintained by the EPICS community.
-#  Sites may override these definitions in CONFIG_SITE.Host.LynxOS
- 
-ARCH_CLASS = LynxOS
-
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
-
-AR = ar -rc
-ARCMD = $(AR) $@
-RANLIB = ranlib -t
-
-
-
-# Configure OS vendor C compiler
-ACC_ANSI = $(ACC) -ansi
-ACC_STRICT = $(ACC) -ansi -pedantic
-ACC_TRAD = $(ACC)
-ACC_WARN_YES = -Wall 
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES =
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES = 
-ACC_SHRLIB_LDFLAGS_YES =
-
-
-
-# Configure OS vendor C++ compiler
-CCC_NORMAL = $(CCC)
-CCC_STRICT = $(CCC)
-CCC_TEMPL_INST_FLAG = -pedantic -DEXPL_TEMP
-CCC_WARN_YES = -Wall
-CCC_WARN_NO = -w
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES = 
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -pedantic
-
-
-# added smh 6/5/98 : when building fdmgr - seems to use this not ACC
-# in effect this overides orig def in CONFIG_COMMON :
-# which is GCC_STRICT = $(GCC) -ansi -pedantic
-GCC_STRICT = $(GCC)
-G++_STRICT = $(G++) -Wtraditional -DEXPL_TEMP
-
-ARCH_DEP_CFLAGS = -DLynxOS -mposix -D_X86_ -DLYNXOS_RELEASE_2_4_0
-ARCH_DEP_LDLIBS = -lc -lbsd -lnsl -lm -lposix4d9 -llynx

config/CONFIG.Host.UnixCommon

@@ -1,4 +1,4 @@
-# CONFIG.Host.UnixCommon
+
 #
 #  Contains definitions common to all Unix archs
 #
@@ -20,7 +20,8 @@ SHRLIB_SUFFIX = .so
 
 SHRLIBNAME = lib$(LIBRARY)$(SHRLIB_SUFFIX)$(SHRLIB_VERSION:%=.%)
 
-DLL_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(PROD_LIBS:%=-l%) $(USR_LIBS:%=-l%)
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS) $(USR_LIBS))
+DLL_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(DLL_LIBS:%=-l%)
 
 INSTALL_SHRLIB = $(INSTALL_LIB)
 
@@ -61,7 +62,8 @@ USR_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(PROD_LIBS:%=-l%) $(USR_LIBS:%=-l%)\
 #--------------------------------------------------
 # Operating system definitions
 OP_SYS_INCLUDES =
-OP_SYS_CFLAGS = -DUNIX 
+OP_SYS_CFLAGS = -DUNIX
+
 OP_SYS_LDFLAGS =
 OP_SYS_LDLIBS = -lm
 

config/CONFIG.Host.WIN32

@@ -3,9 +3,6 @@
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.WIN32
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
 #
 # You currently get Visual C++ even if you ask for GNU.
 #
@@ -20,7 +17,7 @@ CPLUSPLUS = CCC
 MSVISC = c:\\Program\ Files\\DevStudio\\Vc
 WINLINK = link
 
-RCCMD = rc -l 0x409 -i . -i .. -i $(INSTALL_INCLUDE) -i $(EPICS_BASE_INCLUDE) -fo $@ $<
+RCCMD = rc -l 0x409 -i . -i .. -I$(INSTALL_INCLUDE)/os/$(OS_CLASS) -I$(INSTALL_INCLUDE) $(INSTALL_INCLUDES) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE) -fo $@ $<
 
 ARCMD = lib /nologo /verbose /out:$@
 
@@ -236,7 +233,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_L
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with

config/CONFIG.Host.cygwin32

@@ -24,5 +24,11 @@ SHARED_LIBRARIES=NO
 #==========================
  
 ARCH_DEP_CFLAGS = -DCYGWIN32 -U_WIN32
-ARCH_DEP_LDLIBS = -lm
+ARCH_DEP_LDLIBS =
+OP_SYS_LDLIBS =
+
+# cygwin32 overrides to eliminate following warning message -
+# -fPIC ignored for target (all code is position independent)
+GCC_DEP_CFLAGS = -D_REENTRANT
+G++_DEP_CFLAGS = -D_REENTRANT
 

config/CONFIG.Host.hp700

@@ -27,6 +27,7 @@ ACC_SLIBS_YES =
 ACC_SLIBS_NO=
 ACC_SHRLIB_CFLAGS_YES = +Z
 ACC_SHRLIB_LDFLAGS_YES = -b
+ACC_DEP_CFLAGS=+DAportable
 
 # Configure OS vendor C++ compiler
 HPCC = cc 
@@ -43,6 +44,7 @@ HPCC_SLIBS_YES =
 HPCC_SLIBS_NO=
 HPCC_SHRLIB_CFLAGS_YES = +Z
 HPCC_SHRLIB_LDFLAGS_YES = -b
+HPCC_DEP_CFLAGS=+DAportable
 
 #Old HP C++ compiler
 #CCC = CC
@@ -51,8 +53,8 @@ HPCC_SHRLIB_LDFLAGS_YES = -b
 #New HP C++ compiler
 CCC = aCC
 # avoid treating "future errors" as actual errors
-CCC_NORMAL = $(CCC) +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
-CCC_STRICT = $(CCC) +p
+CCC_NORMAL = $(CCC) -AA -Aa +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
+CCC_STRICT = $(CCC) -AA -Aa +p
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO =
@@ -67,11 +69,15 @@ CCC_SHRLIB_CFLAGS_YES = +Z
 # then by searching the specified path (see below)
 CCC_SHRLIB_LDFLAGS_YES = -b
 CCC_DEPENDS_FLAG = +m
+CCC_DEP_CFLAGS=+DAportable
 
 # +DAportable causes portable object code to be created for execution
 # on different PA-Risc machines
-ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX +DAportable
-ARCH_DEP_CXXFLAGS = -D_HPUX_SOURCE -DHP_UX +DAportable
-ARCH_DEP_LDLIBS =
-ARCH_DEP_LDFLAGS = -Wl,+b$(DEFAULT_SHRLIB_SEARCH_PATH),+s
 
+empty:=
+space:= $(empty) $(empty)
+
+ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX 
+ARCH_DEP_CXXFLAGS = -D_HPUX_SOURCE -DHP_UX
+ARCH_DEP_LDLIBS =
+ARCH_DEP_LDFLAGS = -Wl,+b,$(subst $(space),:,$(DEFAULT_SHRLIB_SEARCH_PATH)),+s

config/CONFIG.Host.linux-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG.Host.Linux

config/CONFIG.Host.solaris

@@ -23,17 +23,18 @@ SPARCWORKS = /opt/SUNWspro
 
 # Configure OS vendor C compiler
 ACC = $(SPARCWORKS)/bin/cc
-ACC_ANSI = $(ACC) -Xa -v
+ACC_ANSI = $(ACC) -Xa
 ACC_STRICT = $(ACC) -Xc -v
 ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+ACC_DEP_CFLAGS = -KPIC -D_REENTRANT
+
 ACC_WARN_YES = 
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
 ACC_SFLAGS_YES= -Bstatic
 ACC_SFLAGS_NO=
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 ACC_SLIBS_NO=
 ACC_SHRLIB_CFLAGS_YES =
 ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
@@ -42,7 +43,7 @@ ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
 CCC = $(SPARCWORKS)/bin/CC
 CCC_NORMAL = $(CCC) +p
 CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+CCC_DEP_CFLAGS = -KPIC -D_REENTRANT
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO = 
@@ -50,15 +51,16 @@ CCC_OPT_YES =  -O
 CCC_OPT_NO = -g
 CCC_SFLAGS_YES= -Bstatic
 CCC_SFLAGS_NO=
-CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 CCC_SLIBS_NO=
 CCC_DEPENDS_FLAG = -xM1
 CCC_SHRLIB_CFLAGS_YES =
 CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
  
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
 
-ARCH_DEP_CFLAGS = -DSOLARIS 
 # socket and nsl needed by libca.a
 ARCH_DEP_LDLIBS = -lsocket -lnsl
-ARCH_DEP_LDLIBS += -lposix4 -lpthread -lthread
 

config/CONFIG.Host.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG.Host.solaris

config/CONFIG.Host.solaris-x86

@@ -0,0 +1,10 @@
+# CONFIG.Host.solaris-x86
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solaris-x86
+
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
+
+# Solaris on x86
+ARCH_DEP_CPPFLAGS += -D_X86_
+

config/CONFIG.Host.solarisGnu

@@ -0,0 +1,29 @@
+# CONFIG.Host.solarisGnu
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solarisGnu
+
+ARCH_CLASS = solaris
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR) $@
+RANLIB =
+
+#==========================
+# These are overrides of ANSI and CPLUSPLUS values in CONFIG_SITE
+ANSI=GCC
+CPLUSPLUS=G++
+#==========================
+
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+
+# socket and nsl needed by libca.a
+ARCH_DEP_LDLIBS += -lsocket -lnsl
+

config/CONFIG.LynxOS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -20,7 +29,6 @@ CXX = g++
 # the override definitions.
  
 # Tornado directory definitions
-VX_CONFIG_DIR_YES =
 VX_INCLUDE_YES =
 VX_GNU_YES =
 VX_GNU_BIN_YES =
@@ -28,14 +36,12 @@ VX_GNU_LIB_YES =
 
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO =
 VX_INCLUDE_NO =
 VX_GNU_NO =
 VX_GNU_BIN_NO =
  
 # directory definitions
 VX_DIR =
-VX_CONFIG_DIR =
 VX_INCLUDE =
 VX_GNU = 
 

config/CONFIG.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -11,25 +20,22 @@ OS_CLASS = vxWorks
 
 # The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
 # can be overridden for specific host architectures
-# by creating a CONFIG_SITE.Vx.<host_archfile with
+# by creating a CONFIG_SITE.Vx.<host_arch> file with
 # the override definitions.
 
 # Tornado directory definitions
-VX_CONFIG_DIR_YES = $(VX_DIR)/target/config
 VX_INCLUDE_YES = $(VX_DIR)/target/h
 VX_GNU_YES = $(VX_DIR)/host/$(WIND_HOST_TYPE)
 VX_GNU_BIN_YES = $(VX_GNU)/bin
 VX_GNU_LIB_YES = $(VX_GNU)/lib
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO = $(VX_DIR)/config
 VX_INCLUDE_NO = $(VX_DIR)/h
 VX_GNU_BIN_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 VX_GNU_LIB_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
 
 # directory definitions
 VX_DIR = $(VX_DIR_$(TORNADO))
-VX_CONFIG_DIR = $(VX_CONFIG_DIR_$(TORNADO))
 VX_INCLUDE = $(VX_INCLUDE_$(TORNADO))
 VX_GNU = $(VX_GNU_$(TORNADO))
 GNU_BIN = $(VX_GNU_BIN_$(TORNADO))
@@ -52,7 +58,8 @@ LD = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
 CPLUSPLUS_YES = G++
 G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
 LD_G++ = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
-NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)$(HOSTEXE)
+NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)
+MUNCH = $(GNU_BIN)/munch
 
 #--------------------------------------------------
 # Pre Tornado C++ crosscompiler definitions
@@ -129,16 +136,3 @@ WARN_CXXFLAGS = $($(CPLUSPLUS)_WARN_$(VX_WARN))
 LINK.c = $(LD) $(LDFLAGS) -o
 LINK.cc = $(LD_CXX) $(LDFLAGS) -o
 
-
-#--------------------------------------------------
-# Munch definitions
-MUNCH_SUFFIX=.munch
-MUNCHNAME = $(LIBNAME:%=%$(MUNCH_SUFFIX))
-
-#--------------------------------------------------
-# The follow 2 exports prevent gnu cross-compiler
-# from finding wrong assembler (as).
-export WIND_BASE = $(VX_DIR)
-export WIND_HOST_TYPE
-
-

config/CONFIG.Vx.mv2700

@@ -4,13 +4,13 @@
 # This file is maintained by the EPICS community.
 
 # Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 68k
+CMPLR_SUFFIX = ppc
  
 # For Vx directories of form:
 #   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = 68k
+ARCH_CLASS = mv2700
 
 # Architecture specific build flags
-ARCH_DEP_CPPFLAGS = -DCPU=MC68060 -DCPU_FAMILY=MC680X0
-ARCH_DEP_CFLAGS = -m68040
-
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604
+ARCH_DEP_CFLAGS = -mcpu=604
+ 

config/CONFIG.Vx.niCpu030

@@ -11,6 +11,6 @@ CMPLR_SUFFIX = 68k
 ARCH_CLASS = 68k
 
 # Architecture specific build flags
-ARCH_DEP_CPPFLAGS = -DCPU=MC68030
+ARCH_DEP_CPPFLAGS = -DCPU=MC68030 -DNICPU030
 ARCH_DEP_CFLAGS = -m68030
  

config/CONFIG.Vx.pc486

@@ -13,5 +13,5 @@ ARCH_CLASS = pc486
 ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
 ARCH_DEP_CFLAGS = -m486
 ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
 

config/CONFIG.Vx.pcPentium

@@ -1,17 +0,0 @@
-
-# CONFIG.Vx.pentium
-#
-# This file is maintained by the EPICS community.
-
-# Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
- 
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = pcPentium
-
-ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
-

config/CONFIG.Vx.ppc603

@@ -0,0 +1,16 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc603_long

@@ -0,0 +1,16 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc604

@@ -11,7 +11,7 @@ ARCH_CLASS = ppc
 
 # Architecture specific build flags 
 ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
-ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin 
+ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align
 
-# ARCH_DEP_CFLAGS== -fsigned-char     #May need for calcPerform.c
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
 

config/CONFIG.Vx.ppc604_long

@@ -0,0 +1,17 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
+

config/CONFIG.Vx.sbs_pc6

@@ -0,0 +1,16 @@
+# Created by Korobov for SBS PC6
+# CONFIG.Vx.sbs_pc6
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 386
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = sbs_pc6
+
+ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -DCPU_VARIANT=PENTIUM -D_X86_ 
+ARCH_DEP_CFLAGS = -mpentium
+ARCH_DEP_CXXFLAGS += -x 'c++'
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop

config/CONFIG.Vx.simpc

@@ -1,21 +0,0 @@
-
-# CONFIG.Vx.simpc
-#
-# This file is maintained by the EPICS community.
-
-# Vx GNU cross compiler suffix
-CMPLR_SUFFIX = simpc
- 
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = simpc
-
-ARCH_DEP_CPPFLAGS = -DCPU=SIMNT -DCPU_FAMILY=SIMNT -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop -DRW_MULTI_THREAD -D_REENTRANT -nostdlib
-
-#
-# no drivers on the Tornado II simulator
-#
-DIRS = $(filter-out drv dev devOpt, $(DIRS)) 

config/CONFIG.Vx.vxWorks-486

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-486 is the new R3.14 name for pc486
-include $(EPICS_BASE)/config/CONFIG.Vx.pc486

config/CONFIG.Vx.vxWorks-68040

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68040 is the new R3.14 name for mv167
-include $(EPICS_BASE)/config/CONFIG.Vx.mv167

config/CONFIG.Vx.vxWorks-68040lc

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68040lc is the new R3.14 name for mv162lc
-include $(EPICS_BASE)/config/CONFIG.Vx.mv162lc

config/CONFIG.Vx.vxWorks-68060

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68060 is the new R3.14 name for mv177
-include $(EPICS_BASE)/config/CONFIG.Vx.mv177

config/CONFIG.Vx.vxWorks-ppc604

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-ppc604 is the new R3.14 name for ppc604
-include $(EPICS_BASE)/config/CONFIG.Vx.ppc604

config/CONFIG.Vx.vxipc

@@ -13,5 +13,5 @@ ARCH_CLASS = pc486
 ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
 ARCH_DEP_CFLAGS = -m486
 ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
 

config/CONFIG_BASE

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -49,23 +58,3 @@ endif
 
 EPICS_BASE = $(INSTALL_LOCATION)
 
-#
-# this speeds up the build by turning off implicit rules search
-# for EPICS Makefiles (which are not created from other files)
-#
-.PHONY:: $(EPICS_BASE)/config/CONFIG DEPENDS
-.PHONY:: $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(T_A)
-.PHONY:: $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(HOST_ARCH)
-.PHONY:: $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE)
-.PHONY:: $(EPICS_BASE)/config/CONFIG_SITE.Host.UnixCommon
-
-.PHONY:: $(EPICS_BASE)/config/RULES.$(BUILD_TYPE)
-.PHONY:: $(EPICS_BASE)/config/RULES_*
-
-.PHONY:: $(HOME)/EPICS_CONFIG
-.PHONY:: $(HOME)/EPICS_CONFIG.$(BUILD_TYPE) $(HOME)/EPICS_CONFIG.$(HOST_ARCH)
-.PHONY:: $(HOME)/EPICS_CONFIG.$(BUILD_TYPE).$(T_A)
-.PHONY:: $(HOME)/EPICS_CONFIG.$(BUILD_TYPE).$(HOST_ARCH)
-.PHONY:: $(HOME)/EPICS_CONFIG_HOST_ARCH.$(HOST_ARCH)
-
-.PHONY:: ../Makefile.* Makefile

config/CONFIG_BASE_VERSION

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -8,13 +17,15 @@
 #
 
 EPICS_VERSION=3
-EPICS_REVISION=14
-EPICS_MODIFICATION=0
-EPICS_UPDATE_NAME=alpha
-EPICS_UPDATE_LEVEL=1
+EPICS_REVISION=13
+EPICS_MODIFICATION=10
+EPICS_UPDATE_NAME=
+EPICS_UPDATE_LEVEL=0
 
-EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}"
+EPICS_LOCAL_NAME=B
+EPICS_LOCAL_VERSION=0
+
+EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}.$(EPICS_LOCAL_NAME)$(EPICS_LOCAL_VERSION)"
 
 CVS_DATE="\$$Date$$"
-CVS_TAG="\$$Name$$"
 

config/CONFIG_COMMON

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -60,8 +69,8 @@ INSTALL_LIBRARY = $(INSTALL)
 
 # dbtools from EPICS
 
-# state notation language compiler (removed from base for R3.14)
-SNC = $(SEQ)/bin/$(HOST_ARCH)/snc$(EXE)
+# state notation language compiler (installed from base/src/sequencer)
+SNC = $(EPICS_BASE_HOST_BIN)/snc$(EXE)
 
 ifdef T_A
 

config/CONFIG_COMPAT

@@ -1,23 +0,0 @@
-#
-# $Id$
-#
-# Convert old HOST_ARCH environment variable 
-
-#Syntax:
-# ARCH_<host_arch> = <epics_host_arch>
-ARCH_solaris = solaris-sparc
-ARCH_sun4 = sun4-sparc
-ARCH_Linux = linux-x86
-ARCH_WIN32 = win32-x86
-ARCH_hp700 = hpux-m68k
-ARCH_hp700 = osf-alpha
-
-ifndef EPICS_HOST_ARCH
-ifdef HOST_ARCH
-EPICS_HOST_ARCH = $(firstword $(ARCH_$(HOST_ARCH)) $(HOST_ARCH))
-else 
-EPICS_HOST_ARCH = unsupported
-endif
-endif
-
-HOST_ARCH := $(EPICS_HOST_ARCH)

config/CONFIG_ENV

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	$Id$
 #	Author:	Andrew Johnson
 #	Date:	20 April 1995

config/CONFIG_HOST_ARCH.Borland

@@ -2,7 +2,6 @@
 #
 
 EXE=.exe
-HOSTEXE=.exe
 
 CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
 MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
@@ -15,6 +14,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.Linux

@@ -5,5 +5,5 @@
 # Include definitions common to all Unix archs
 include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
-WIND_HOST_TYPE = i386-linux2
+WIND_HOST_TYPE = x86-linux
 

config/CONFIG_HOST_ARCH.WIN32

@@ -2,7 +2,6 @@
 #
 
 EXE=.exe
-HOSTEXE=.exe
 
 CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
 MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
@@ -14,6 +13,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.cygwin32

@@ -6,9 +6,8 @@
 -include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
 EXE=.exe
-HOSTEXE=.exe
 
 TORNADO=YES
 
-WIND_HOST_TYPE = cygwin32
+WIND_HOST_TYPE = x86-win32
 

config/CONFIG_HOST_ARCH.linux-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.Linux

config/CONFIG_HOST_ARCH.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris

config/CONFIG_HOST_ARCH.solaris-x86

@@ -1,9 +1,9 @@
-#  CONFIG_HOST_ARCH.LynxOS
+#  CONFIG_HOST_ARCH.solaris-x86
 #
-# Override values in CONFIG.LynxOS
+# Override values in CONFIG.Vx
 
 # Include definitions common to all Unix archs
 include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
-WIND_HOST_TYPE = LynxOS
+WIND_HOST_TYPE = x86-solaris2
 

config/CONFIG_HOST_ARCH.solarisGnu

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.solarisGnu
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = sun4-solaris2
+

config/CONFIG_SITE

@@ -21,6 +21,8 @@
 #	hp700
 #	sgi
 #	solaris
+#	solarisGnu  (GNU compiler)
+#	solaris-x86
 #	sun4
 #
 #  HOST_ARCH now an environment variable
@@ -42,12 +44,17 @@ endif
 #       mv162lc
 #       mv167
 #       mv177
+#       mv2700
 #       niCpu030
 #       pc486
+#       ppc603
 #       ppc604
+#       ppc603_long (over 32MB)
+#       ppc604_long (over 32MB)
+#       sbs_pc6
 #       vxipc
 #
-CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040 vxWorks-ppc604
+CROSS_COMPILER_TARGET_ARCHS=
 
 
 #  If only a subset of the host architectures perform
@@ -63,8 +70,8 @@ TORNADO=YES
  
 #  VxWorks directory for TORNADO=YES
 #VX_DIR_YES=c:\\Tornado
-#VX_DIR_YES = /usr/local/vw/tornado101
-VX_DIR_YES = /usr/local/vw/tornado20
+VX_DIR_YES = /usr/local/vw/tornado202p1
+
 
 #  VxWorks directory for TORNADO=NO
 #VX_DIR_NO=$(VW)
@@ -119,7 +126,7 @@ MAKE_INC_TARGET_FIRST=NO
 #     NOTE WIN32: YES results in a DLL. CONFIG_SITE.Host.WIN32
 #                 distribution file contains YES override
 #
-#     NOTE solaris and sun4: If YES then LD_LIBRARY_PATH must
+#     NOTE solaris,Linux, and sun4: If YES then LD_LIBRARY_PATH must
 #     include fullpathname $(INSTALL_LOCATION)/lib/$(HOST_ARCH)
 #     for both the base build and when invoking base executables
 SHARED_LIBRARIES=NO
@@ -162,4 +169,3 @@ E2DB_FLAGS =
 #dbst 
 DBST = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/dbst
 
-include $(EPICS_BASE)/config/CONFIG_COMPAT

config/CONFIG_SITE.Host.Borland

@@ -6,3 +6,5 @@
  
 SHARED_LIBRARIES = YES
 
+BORLAND=C:\\Borland\\bcc55
+

config/CONFIG_SITE.Host.LynxOS

@@ -1,15 +0,0 @@
-#
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# APS overrides of definitions 
-
-GCC = gcc
-G++ = g++
-CC = gcc
-CCC = g++
-ACC = gcc
-PLUSPLUS = g++
-CXX = g++

config/CONFIG_SITE.Host.hp700

@@ -8,7 +8,7 @@
 SHARED_LIBRARIES=YES
 
 # where we expect to find shared libraries if not found elsewhere
-# DEFAULT_SHRLIB_SEARCH_PATH = /home/controls/epics/cdev/lib/hpux-10.20:/home/controls/epics/cdev/lib/hpux-10.XX:/opt/TclTk/lib:/opt/xpm/lib/X11:/usr/lib/pa1.1:/usr/lib:/lib:/opt/csr/installed/HP-UX/lib::/opt/OPI/GUI/lib/hp700:/opt/OPI/MapperApplications/lib/hp700:/opt/OPI/cdevAppl/lib/hp700:/opt/OPI/cmlog/lib/hp700:/opt/OPI/models/lib/hp700:/opt/OPI/sddsAppl/lib/hp700
+#DEFAULT_SHRLIB_SEARCH_PATH = /opt/epics/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)/support/base/$(EPICS_VERSION)-$(EPICS_REVISION)-$(EPICS_MODIFICATION)/lib/hp700
 DEFAULT_SHRLIB_SEARCH_PATH = /cs/lib/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION).$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL):$(INSTALL_LIB)
 
 #No special action should be required to build or use shared libraries.

config/CONFIG_SITE.Host.linux-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.Linux

config/CONFIG_SITE.Host.solaris

@@ -6,6 +6,6 @@
 
 # APS overrides of definitions 
 
-GCC = /opt/gnu/bin/gcc
-G++ = /opt/gnu/bin/g++
+#GCC = /opt/gnu/bin/gcc
+#G++ = /opt/gnu/bin/g++
 

config/CONFIG_SITE.Host.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.solaris

config/CONFIG_SITE.Vx.Linux

@@ -0,0 +1,28 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+# The definitions VX_DIR, VX_GNU, GNU_DIR, GNU_LIB, etc.
+# can be overridden for specific Linux-target architecture
+# combinations by creating a CONFIG_SITE.Vx.Linux.<T_A>
+# file with the override definitions.
+
+## ---- jba overrides for cross compiler
+## VX_DIR needed for "export WIND_BASE = $(VX_DIR)"
+#VX_DIR_YES = /home/phoebus/JBA/gnu
+#VX_GNU_YES = $(VX_DIR)
+#VX_INCLUDE_YES = $(VX_GNU)/$(GNU_TARGET)/include
+#
+#CMPLR_PREFIX=  $(GNU_TARGET)-
+#CMPLR_SUFFIX=
+#GCC    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#AR     = $(GNU_BIN)/$(CMPLR_PREFIX)ar$(CMPLR_SUFFIX)
+#CPP    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc -x c -E
+#RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
+#LD     = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#G++    = $(GNU_BIN)/$(CMPLR_PREFIX)g++$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#LD_G++ = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#NM     = $(GNU_BIN)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)
+## ---- end jba overrides
+
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(HOST_ARCH).$(T_A)

config/CONFIG_SITE.Vx.Linux.mv167

@@ -0,0 +1,14 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+## ---- jba overrides for cross compiler
+#GNU_TARGET=m68k-wrs-vxworks
+## ---- end jba overrides
+
+# ORNL SNS overrides for cross compilers
+#VX_DIR_YES = /opt/tornado20/
+#VX_INCLUDE_YES = /usr/local/crossgcc/m68k/m68k-wrs-vxworks/sys-include
+#VX_GNU_YES = /usr/local/crossgcc/m68k/
+#VX_GNU_BIN_YES = $(VX_GNU)/bin
+#VX_GNU_LIB_YES = /usr/local/crossgcc/m68k/lib/gcc-lib/m68k-wrs-vxworks/2.95.2

config/CONFIG_SITE.Vx.Linux.ppc603

@@ -0,0 +1,10 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+# ORNL SNS overrides for cross compilers
+#VX_DIR_YES = /opt/tornado20/
+#VX_INCLUDE_YES = /usr/local/crossgcc/ppc/powerpc-wrs-vxworks/sys-include
+#VX_GNU_YES = /usr/local/crossgcc/ppc/
+#VX_GNU_BIN_YES = $(VX_GNU)/bin
+#VX_GNU_LIB_YES = /usr/local/crossgcc/ppc/lib/gcc-lib/powerpc-wrs-vxworks/2.95.2

config/Makefile

@@ -1,18 +1,19 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
 
 TOP=..
 
-include $(TOP)/configure/CONFIG
+include $(TOP)/config/CONFIG_BASE
 
-INSTALL_CONFIG = $(INSTALL_LOCATION)/config
-
-CONFIGS += $(subst ../,,$(wildcard ../CONFIG*))
-CONFIGS += $(subst ../,,$(wildcard ../RULES*))
-
-BIN_INSTALLS += $(wildcard ../tools/*.pl)
-BIN_INSTALLS += ../tools/installEpics
-
-include $(TOP)/configure/RULES
+include $(TOP)/config/RULES_ARCHS
 

config/Makefile.Host

@@ -0,0 +1,43 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#
+# $Id$
+#
+
+TOP = ../..
+include $(TOP)/config/CONFIG_BASE
+
+CONFIGS += CONFIG
+CONFIGS += CONFIG_BASE
+CONFIGS += CONFIG_BASE_VERSION
+CONFIGS += CONFIG_COMMON
+CONFIGS += CONFIG_ENV
+
+CONFIGS += CONFIG.Host.$(HOST_ARCH)
+CONFIGS += CONFIG_HOST_ARCH.$(HOST_ARCH)
+CONFIGS += CONFIG.Host.UnixCommon
+CONFIGS += CONFIG_HOST_ARCH.UnixCommon
+
+CONFIGS += CONFIG.Vx
+CONFIGS += $(CROSS_COMPILER_TARGET_ARCHS:%=CONFIG.Vx.%)
+
+CONFIGS += CONFIG_SITE
+CONFIGS += CONFIG_SITE_ENV
+CONFIGS += $(subst ../,,$(wildcard ../CONFIG_SITE*))
+
+CONFIGS += RULES.Host
+CONFIGS += RULES.Unix
+CONFIGS += RULES.Vx
+CONFIGS += RULES_ARCHS
+CONFIGS += RULES_DIRS
+CONFIGS += RULES_TOP
+
+include $(TOP)/config/RULES.Host
+

config/RULES.Host

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 #	Rules for making things specified in Makefile.Host
@@ -29,7 +38,9 @@
 vpath %.h $(USER_VPATH)   
 vpath %.c $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
 vpath %.cc $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
+vpath %.cpp $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
 vpath %.rc $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
+vpath %.jar $(USER_VPATH) ..
 
 #	check for add-on CFLAGS and CXXFLAGS
 #
@@ -224,7 +235,7 @@ endif
 #	(convenience for extensions and applications)
 ifneq ($(EPICS_BASE),$(TOP))
 ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
-EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS)
+EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE)
 EPICS_DBDFLAGS += -I $(EPICS_BASE)/dbd
 endif
 endif
@@ -281,7 +292,9 @@ endif
 
 #---------------------------------------------------------------
 # always use c++ linker
+ifneq ($(strip $(CPLUSPLUS)),)
 LINK.c = $(LINK.cc)
+endif # CPLUSPLUS
 
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
@@ -303,11 +316,6 @@ LIBTARGETS += $(LIBNAME) $(INSTALL_LIBS)
 LIBNAME_RCS=$(foreach lib, $(basename $(LIBRARY)), $(RCS) $($(lib)_RCS) $($(lib)_RCS_$(ARCH_CLASS)))
 LIBNAME_RESS=$(addsuffix $(RES), $(basename $(LIBNAME_RCS)))
 
-ifneq ($(words $(DLL_LIBS)), $(words $(DLL_DEPLIBS)))
-#  If invalid library names, don't make DLL file
-SHARED_LIBRARIES = NO
-endif
-
 #  check if shared libraries requested
 ifeq ($(strip $(SHARED_LIBRARIES)),YES)
 
@@ -326,8 +334,6 @@ endif # LIBOBJS
 endif # LIBRARY
 
 #---------------------------------------------------------------
-#	Main targets
-
 all::	install
 
 build:: inc
@@ -358,7 +364,7 @@ buildInstall :: build $(TARGETS) \
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *$(OBJ) *.a $(PROD) $(TESTPROD) $(LIBNAME) $(SHRLIBNAME) $(INC) \
-	*$(RES) $(TARGETS) $(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS)
+	*$(RES) $(TARGETS) *.dbd $(MENUS) $(RECTYPES) $(BPTS)
 ifdef DBDEXPAND
 	@$(RM) $(DBDNAME)
 endif
@@ -383,6 +389,14 @@ PRODNAME_SRCS += $(PRODNAME_SRCS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PRODNAME_OBJS_$(ARCH_CLASS))),)
+PRODNAME_OBJS += $(subst -nil-,,$(PRODNAME_OBJS_$(ARCH_CLASS)))
+else
+ifdef PRODNAME_OBJS_DEFAULT
+PRODNAME_OBJS += $(PRODNAME_OBJS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(PRODNAME_RCS_$(ARCH_CLASS))),)
 PRODNAME_RCS += $(subst -nil-,,$(PRODNAME_RCS_$(ARCH_CLASS)))
 else
@@ -401,10 +415,10 @@ else
 PRODNAME_LINKER = $(LINK.c)
 endif
 
-PRODNAME_OBJS=$(addsuffix $(OBJ), $(basename $(PRODNAME_SRCS)))
-PRODNAME_RESS=$(addsuffix $(RES), $(basename $(PRODNAME_RCS)))
+PRODNAME_OBJS+=$(addsuffix $(OBJ), $(basename $(PRODNAME_SRCS)))
+PRODNAME_RESS+=$(addsuffix $(RES), $(basename $(PRODNAME_RCS)))
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(PRODNAME): $(PRODNAME_OBJS) $(PRODNAME_RESS)
 	@$(RM) $@
 	$(PRODNAME_LINKER) $(PRODNAME_OBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(LDLIBS)),, $(PRODNAME_RESS)
@@ -449,10 +463,12 @@ endif  #ifdef PROD
 #     Java classes and packages
 #
 
+ifdef JAVA
 DIRECTORY_TARGETS += $(INSTALL_JAVA)
 ifdef PACKAGE
 DIRECTORY_TARGETS += $(INSTALL_JAVA)/$(PACKAGE)
 endif
+endif
 
 vpath %.class $(INSTALL_JAVA)/$(PACKAGE)
 
@@ -461,32 +477,47 @@ TESTCLASSES += $(subst .java,.class,$(TESTJAVA))
 INSTALL_CLASSES =$(CLASSES:%=$(INSTALL_JAVA)/$(PACKAGE)/%)
 INSTALL_JAR =$(JAR:%=$(INSTALL_JAVA)/%)
 
+ifeq ($(strip $(JAVADOC)),YES)
+DIRECTORY_TARGETS += $(INSTALL_HTML)
+INSTALL_JAVADOC = $(CLASSES:%.class=$(INSTALL_HTML)/%.html)
+ifdef PACKAGE
+DIRECTORY_TARGETS += $(INSTALL_HTML)/$(PACKAGE)
+INSTALL_JAVADOC = $(CLASSES:%.class=$(INSTALL_HTML)/$(PACKAGE)/$(PACKAGE)/%.html)
+endif
+endif
+
 JAR_OPTIONS = cvf
 ifdef MANIFEST
 JAR_OPTIONS = cvmf
 endif
-JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+#JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+JAR_DEPFILES +=  $(JAR_INPUT)
 
 $(DIRECTORY_TARGETS) :
 	$(MKDIR) $@
 
 build:: $(TESTCLASSES) $(JAR)
 
-buildInstall :: $(DIRECTORY_TARGETS) $(INSTALL_CLASSES) $(INSTALL_JAR)
+buildInstall :: $(DIRECTORY_TARGETS) $(INSTALL_CLASSES) $(INSTALL_JAR) $(INSTALL_JAVADOC)
 
 clean::
-	@$(RM) $(TESTCLASSES) $(JAR)
+	@$(RM) $(TESTCLASSES) $(JAR) $(INSTALL_CLASSES) $(INSTALL_JAVADOC)
 
 %.class:%.java
 	@echo Creating java class file $@
 	$(RM) $@
 	$(JAVACCMD) $<
 
-$(INSTALL_JAVA)/$(PACKAGE)/%.class:%.java
+$(INSTALL_JAVA)/$(PACKAGE)/%.class:%.java 
 	@echo Creating java class file $@
 	@$(RM) $@
 	$(JAVACCMD) -d $(INSTALL_JAVA) $<
 
+$(INSTALL_JAVADOC):$(JAVA)
+	@echo Creating javadoc html files $@
+	@$(RM) $@
+	$(JAVADOCCMD) -d $(INSTALL_HTML)/$(PACKAGE) $(PACKAGE) 
+
 $(JAR):%.jar:  $(JAR_DEPFILES)
 	@echo Creating java jar file $@
 	@$(RM) $@
@@ -494,12 +525,12 @@ $(JAR):%.jar:  $(JAR_DEPFILES)
 
 $(INSTALL_JAVA)/%.jar: %.jar
 	@echo "Installing jar file $@"
-	$(INSTALL) -d -m 644 $< $(@D)
+	@$(INSTALL) -d -m 644 $< $(@D)
 
 $(PACKAGE)_%.h:$(INSTALL_JAVA)/$(PACKAGE)/%.class
 	$(JAVAHCMD) $(PACKAGE).$*
 
-.PRECIOUS: $(INSTALL_CLASSES)
+.PRECIOUS: $(INSTALL_CLASSES) $(INSTALL_JAVADOC)
 
 #---------------------------------------------------------------
 #---------------------------------------------------------------
@@ -517,11 +548,13 @@ $(PACKAGE)_%.h:$(INSTALL_JAVA)/$(PACKAGE)/%.class
 #  The order of the following rules is
 #  VERY IMPORTANT !!!!
 
-depends:: $(LIBSRCS) $(SRCS) $(COND_PROD_SRCS)
+depends:: $(LIBSRCS) $(SRCS) $(COND_PROD_SRCS) $(SRCS.c) $(SRCS.cc)
 	$(RM) DEPENDS
+ifneq ($(strip $(LIBSRCS) $(SRCS) $(COND_PROD_SRCS) $(SRCS.c) $(SRCS.cc)),)
 	$(DEPENDS_RULE)
+endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 %$(EXE): %.c
 	@$(RM) $@
 	$(COMPILE.c)  $<
@@ -532,6 +565,11 @@ ifeq ($(HOST_ARCH),Borland)
 	$(COMPILE.cc)  $<
 	$(LINK.cc) $(subst ../,,$(basename $<))$(OBJ) , $@ ,,$(LINKLIBS)  $(subst /,\\,$(LDLIBS))
 
+%$(EXE): %.cpp
+	@$(RM) $@
+	$(COMPILE.cc)  $<
+	$(LINK.cc) $(subst ../,,$(basename $<))$(OBJ) , $@ ,,$(LINKLIBS)  $(subst /,\\,$(LDLIBS))
+
 %$(EXE): %.C
 	@$(RM) $@
 	$(COMPILE.cc)  $<
@@ -549,6 +587,11 @@ else
 	$(COMPILE.cc)  $<
 	$(LINK.cc) $(subst ../,,$(basename $<))$(OBJ) $(LDLIBS)
 
+%$(EXE): %.cpp
+	@$(RM) $@
+	$(COMPILE.cc)  $<
+	$(LINK.cc) $(subst ../,,$(basename $<))$(OBJ) $(LDLIBS)
+
 %$(EXE): %.C
 	@$(RM) $@
 	$(COMPILE.cc)  $<
@@ -564,6 +607,10 @@ endif
 	@$(RM) $@
 	$(COMPILE.cc)  $<
 
+%$(OBJ): %.cpp
+	@$(RM) $@
+	$(COMPILE.cc)  $<
+
 %$(OBJ): %.C
 	@$(RM) $@
 	$(COMPILE.cc)  $<
@@ -603,8 +650,8 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c:	%.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	ln -s $< $*.st
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
 	@$(RM) $*.st
@@ -616,7 +663,7 @@ endif
 %.db: ../%.edf
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) $<
 
-%.edf: ../%.sch
+%.edf: ../%.sch $(DEPSCHS)
 	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
 	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) $<
 
@@ -644,29 +691,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -676,15 +723,16 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd
 endif
 endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(DLL_LDLIBS)), $(DLL_DEF_FLAG), $(LIBNAME_RESS)
 
@@ -693,7 +741,7 @@ $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) $(DLL_LDLIBS) $(LIBNAME_RESS)
 
 endif
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 # rule for lib (archive of object files) creation
 $(LIBNAME): $(LIBOBJS)
 	$(RM) $@
@@ -735,10 +783,10 @@ $(INSTALL_LIB)/%.lib: %.lib
 
 $(INSTALL_SHRLIB)/lib%: lib%
 	@echo "Installing library $@"
-	@$(INSTALL) -d -m 555 $< $(INSTALL_SHRLIB)
+	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
 ifdef SHRLIB_VERSION
-	@$(RM) $(@:%.$(SHRLIB_VERSION)=%)
-	ln -s $< $(@:%.$(SHRLIB_VERSION)=%) 
+	$(RM) $(subst .$(SHRLIB_VERSION),,$@)
+	ln -s $< $(subst .$(SHRLIB_VERSION),,$@)
 endif # SHRLIB_VERSION
 
 $(INSTALL_TCLLIB)/%: %

config/RULES.Unix

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 INCREC +=$(RECTYPES) $(MENUS)
@@ -139,8 +148,8 @@ $(TARGETS) $(PROD): $(DEPLIBS)
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
 
@@ -179,29 +188,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -211,8 +220,9 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd

config/RULES.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 ifneq ($(strip $(LIBOBJS_$(ARCH_CLASS))),)
@@ -11,7 +20,6 @@ endif
 INCREC +=$(RECTYPES) $(MENUS)
 INSTALL_PROD = $(PROD:%= $(INSTALL_BIN)/%)
 INSTALL_LIBS = $(LIBNAME:%= $(INSTALL_BIN)/%)
-INSTALL_MUNCHES = $(MUNCHNAME:%= $(INSTALL_BIN)/%)
 INSTALL_LIBS_CXX = $(LIBNAME_CXX:%= $(INSTALL_BIN)/%)
 INSTALL_INC = $(INC:%= $(INSTALL_INCLUDE)/%)
 INSTALL_OSINCLUDE = $(INSTALL_INCLUDE)/os/vxWorks
@@ -53,7 +61,7 @@ rebuild:: clean install
 pre_build:: 
 
 build:: pre_build $(MENUS) $(RECTYPES) $(BPTS)\
-         $(LIBNAME) $(LIBNAME_CXX) $(MUNCHNAME) $(TARGETS) $(PROD)
+         $(LIBNAME) $(LIBNAME_CXX) $(TARGETS) $(PROD)
 ifdef DBDEXPAND
 build::	$(DBDNAME)
 endif
@@ -63,7 +71,7 @@ inc:: $(INSTALL_INC) $(INSTALL_OSINC)
 install:: buildInstall 
 
 buildInstall :: build $(INSTALL_INCREC)\
-         $(INSTALL_LIBS) $(INSTALL_LIBS_CXX) $(INSTALL_MUNCHES) \
+         $(INSTALL_LIBS) $(INSTALL_LIBS_CXX) \
 	 $(TARGETS) $(INSTALL_PROD) \
 	 $(INSTALL_MANS) $(INSTALL_DOCS) \
          $(INSTALL_HTMLS) \
@@ -77,15 +85,14 @@ endif
 
 depends:: $(SRCS.c) $(SRCS.cc)
 	$(RM) DEPENDS
+ifneq ($(strip $(SRCS.c) $(SRCS.cc)),)
 	$(DEPENDS_RULE)
+endif
 
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *.o *.a *.out $(TARGETS) $(PROD) $(LIBNAME) $(INC) \
-	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME)
-ifdef MUNCH
-	@$(RM) $(MUNCHNAME) ctdt.c ctdt.o nm.out
-endif
+	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME) *.c 
 
 #  The order of the following dependencies is
 #  VERY IMPORTANT !!!!
@@ -116,19 +123,11 @@ endif
 
 # C++ munching
 %.out : %.o
-	@ $(RM) ctct.o ctdt.c nm.out
-	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
+	@ $(RM) ctct.o ctdt.c
+	$(NM) $< | $(MUNCH) > ctdt.c
 	$(COMPILE.c) -traditional ctdt.c
-	$(LINK.cc) $@ $< ctdt.o
-
-# C++ munching for VxWorks
-$(MUNCHNAME):%.munch : %
-	@ $(RM) ctct.o ctdt.c nm.out
-	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
-	$(COMPILE.c) -traditional ctdt.c
-	$(LINK.cc) $@ $(LDFLAGS) $< ctdt.o
+	$(LINK.c) $@ $< ctdt.o
+	@ $(RM) ctdt.c ctdt.o
 
 #
 # rename the y.tab.h file only if we
@@ -160,8 +159,8 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	ln -s $< $*.st
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
 	@$(RM) $*.st
@@ -204,29 +203,29 @@ $(INSTALL_DBD)/%: ../%
 
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -236,8 +235,9 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 endif
 
 $(LIBNAME): $(LIBOBJS)

config/RULES_ARCHS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
@@ -13,7 +22,6 @@ ACTIONS += install
 ACTIONS += buildInstall 
 ACTIONS += depends 
 ACTIONS += rebuild 
-ACTIONS += browse 
 
 actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))

config/RULES_DIRS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/RULES_TOP

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/Sample.Makefile.Host

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	Makefile.Host  for  base/src/sample
 #
 #

config/tools/cp.pl

@@ -1,39 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-cp in Perl
-
-use File::Copy;
-
-sub Usage
-{
-	my ($txt) = @_;
-
-	print "Usage:\n";
-	print "\tcp file1 file2\n";
-	print "\tcp file [ file2 file3 ...] directory\n";
-	print "\nError: $txt\n" if $txt;
-
-	exit 2;
-}
-
-# need at least two args: ARGV[0] and ARGV[1]
-Usage("need more args") if $#ARGV < 1;
-
-$target=$ARGV[$#ARGV];
-@sources=@ARGV[0..$#ARGV-1];
-
-if (-d $target)
-{
-	foreach $file ( @sources )
-	{
-		copy ($file, "$target/$file");
-	}
-}
-else
-{
-	Usage("Cannot copy more than one source into a single target")
-		if ($#sources != 0);
-	copy ($sources[0], $target);
-}
-
-# EOF cp.pl

config/tools/findBase.pl

@@ -1,13 +0,0 @@
-#!/usr/bin/perl
- 
-use Cwd;
- 
-$dir=cwd();
-#   make sure $dir ends with '/'
-#
-$dir="$dir/" unless ($dir =~ m'/$');
- 
-if ($dir =~ m'(.*(/|\\)base)(/|\\)')
-{
-    print "$1";
-}

config/tools/installEpics.pl

@@ -1,109 +0,0 @@
-#!/usr/bin/perl
-#
-#	InstallEpics.pl
-#
-#	InstallEpics is used within makefiles to copy new versions of
-#	files into a destination directory.
-#	Based on installEpics shell script.
-#
-#	2-4-97 -kuk-
-#
-##########################################################
-
-use Getopt::Std;
-use File::Path;
-use File::Copy;
-
-$tool=$0;
-$tool=~ s'.*[/\\].+'';	# basename
-$mode=0755;
-
-# get command line options
-getopt "m";
-$mode = oct ($opt_m) if ($opt_m);
-
-#	Complain about obsolete options:
-Usage("unknown option given") if ($opt_g or $opt_o or $opt_c or $opt_s);
-
-$num_files = $#ARGV;
-# at least two args required
-Usage ("Nothing to install") if ($num_files < 1);
-
-#	split args in file1 ... fileN target_dir:
-@files=@ARGV[0..$num_files-1];
-$install_dir=$ARGV[$num_files];
-$install_dir =~ s[\\][/]g;	# maybe fix DOS-style path
-$install_dir =~ s[/$][];	# remove trailing '/'
-$install_dir =~ s[//][/]g;	# replace '//' by '/'
-
-#	Do we have to create the directory?
-unless (-d $install_dir)
-{
-	#	Create dir only if -d option given
-	Usage ("$install_dir does not exist") unless ($opt_d);
-
-	#	Create all the subdirs that lead to $install_dir
-	mkpath ($install_dir, 1, 0777);
-}
-
-foreach $source ( @files )
-{
-	Usage ("Can't find file '$source'") unless -f $source;
-
-	$basename=$source;
-	$basename=~s'.*[/\\]'';
-	$target  = "$install_dir/$basename";
-
-	#	The Win32 filesystem seems to be 'slow',
-	#	i.e. $target may look like 'up to date'
-	#	unless you wait an hour.
-	#	-> skip this test on WIN32 ?
-	#if (-f $target  and  $^O ne "MSWin32")
-	if (-f $target)
-	{
-		if (-M $target  <  -M $source    and
-		    -C $target  <  -C $source)
-		{
-			print "$target is up to date\n";
-			next;
-		}
-		else
-		{
-			#	remove old target, make sure it is deletable:
-			chmod 0777, $target;
-			unlink $target;
-		}
-	}
-
-	# print "Installing $source into $install_dir\n";
-	copy ($source, $target) or die "Copy failed";
-
-	#	chmod 0555 <read-only> DOES work on WIN32, but:
-	#	Another chmod 0777 to make it write- and deletable
-	#	will then fail.
-	#	-> you have to use Win32::SetFileAttributes
-	#	   to get rid of those files from within Perl.
-	#	Because the chmod is not really needed on WIN32,
-	#	just skip it!
-	chmod $mode, $target unless ($^O eq "MSWin32");
-}
-
-sub Usage
-{
-	my ($txt) = @_;
-
-	print "Usage:\n";
-	print "\t$tool [ -m mode ] file ... directory\n";
-	print "\n";
-	print "\t-d             Create non-exising directories\n";
-	print "\t-m mode        Set the mode for the installed file";
-		print " (0755 by default)\n";
-	print "\tfile           Name of file\n";
-	print "\tdirectory      Destination directory\n";
-
-	print "$txt\n" if $txt;
-
-	exit 2;
-}
-
-#	EOF installEpics.pl

config/tools/makeMakefile.pl

@@ -1,31 +0,0 @@
-#!/usr/bin/perl
-#
-#	makeMakefile.pl
-#
-#	called from RULES_ARCHS
-#
-#
-#	Usage: perl makeMakefile.pl O.*-dir Makefile-Type
-
-$dir = $ARGV[0];
-$type= $ARGV[1];
-$makefile="$dir/Makefile";
-
-if ($dir =~ m'O.(.+)')
-{
-	$t_a = $1;
-}
-else
-{
-	die "Cannot extract T_A from $dir";
-}
-
-mkdir ($dir, 0777)  unless -d $dir;
-
-open OUT, "> $makefile"  or die "Cannot create $makefile";
-print OUT "T_A=$t_a\n";
-print OUT "BUILD_TYPE=$type\n";
-print OUT "include ../Makefile.$type\n";
-close OUT;
-
-#	EOF makeMakefile.pl

config/tools/mkdir.pl

@@ -1,23 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-mkdir in Perl
-#
-#	-p option generates full path to given dir
-
-use File::Path;
-use Getopt::Std;
-getopt "";
-
-foreach $dir ( @ARGV )
-{
-	if ($opt_p)
-	{
-		mkpath ($dir) or die "Cannot make directory $dir";
-	}
-	else
-	{
-		mkdir ($dir, 0777) or die "Cannot make directory $dir";
-	}
-}
-
-# EOF mkdir.pl

config/tools/munch.pl

@@ -1,51 +0,0 @@
-eval 'exec perl -S $0 ${1+"$@"}'  # -*- Mode: perl -*-
-    if $running_under_some_shell; # makeConfigAppInclude.pl
-
-# Creates a ctdt.c file of c++ static constructors and destructors.
-#  $Id$
-
-@ctorlist = ();
-@dtorlist = ();
-
-while ($line = <STDIN>)
-{
-    if ($line =~ /__?GLOBAL_.D.+/) {
-        ($adr,$type,$name) = split ' ',$line,3;
-        chop $name;
-        $name =~ s/^__/_/;
-        @dtorlist = (@dtorlist,$name);
-    };
-    if ($line =~ /__?GLOBAL_.I.+/) {
-        ($adr,$type,$name) = split ' ',$line,3;
-        chop $name;
-        $name =~ s/^__/_/;
-        @ctorlist = (@ctorlist,$name);
-    };
-}
-
-foreach $ctor (@ctorlist)
-{
-    printf "void %s();\n",$ctor;
-}
-
-print "extern void (*_ctors[])();\n";
-print "void (*_ctors[])() = {\n";
-foreach $ctor (@ctorlist)
-{
-    printf "        %s,\n",$ctor;
-}
-print "        0};\n";
-
-
-foreach $dtor (@dtorlist)
-{
-    printf "void %s();\n",$dtor;
-}
-
-print "extern void (*_ctors[])();\n";
-print "void (*_dtors[])() = {\n";
-foreach $dtor (@dtorlist)
-{
-    printf "        %s,\n",$dtor;
-}
-print "        0};\n";

config/tools/mv.pl

@@ -1,69 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-mv in Perl
-
-use File::Copy;
-
-sub Usage
-{
-	my ($txt) = @_;
-
-	print "Usage:\n";
-	print "\tmv oldname newname\n";
-	print "\tmv file [ file2 file3 ...] directory\n";
-	print "\nError: $txt\n" if $txt;
-
-	exit 2;
-}
-
-sub Move
-{
-	my ($src, $dest) = @_;
-
-	print "Move($src, $dest)\n";
-
-	copy ($src, $dest) or die "Cannot copy $src to $dest";
-	unlink ($src) or die "Cannot remove $src";
-}
-
-#	return filename.ext from  Drive:/path/a/b/c/filename.ext
-sub Filename
-{
-	my ($file) = @_;
-
-	$file =~ s'.*[/\\]'';
-
-	return $file;
-}
-
-# need at least two args: ARGV[0] and ARGV[1]
-Usage("need more args") if $#ARGV < 1;
-
-$target=$ARGV[$#ARGV];
-@sources=@ARGV[0..$#ARGV-1];
-
-print "move @sources into $target\n";
-
-#	If target is (already existent) directory,
-#	move files into it:
-if (-d $target)
-{
-	foreach $file ( @sources )
-	{
-		Move ($file, "$target/" . Filename($file));
-	}
-	exit 0;
-}
-
-#	Otherwise the target is a filename.
-#	Now 'mv' may be either a 'move' or a 'rename',
-#	in any case it requires exactly two args: old and new name.
-
-Usage("Need exactly one source") if $#sources != 0;
-$source = @sources[0];
-
-#	Move only if a simple rename 
-#	fails (e.g. across file systems):
-Move ($source, $target) unless (rename $source, $target);
-
-# EOF mv.pl

config/tools/rm.pl

@@ -1,32 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-rm in Perl
-
-use File::Path;
-use File::Find;
-use Getopt::Std;
-
-getopt "";
-
-foreach $arg ( @ARGV )
-{
-	next unless -e $arg;
-
-	if (-d $arg)
-	{
-		if ($opt_r and $opt_f)
-		{
-			rmtree $arg;
-		}
-		else
-		{
-			rmdir ($arg) or die "Cannot delete $arg";
-		}
-	}
-	else
-	{
-		unlink ($arg) or die "Cannot delete $arg";
-	}
-}
-
-# EOF rm.pl

configure/CONFIG

@@ -1,101 +0,0 @@
-#
-#  $Id$
-#
-#  The developer may edit this file.
-# assume T_A is the host arch if not specified
-
-#
-#  Common build definitions
-#
-
-ifndef CONFIG
-CONFIG = $(TOP)/configure
-endif
-
--include $(CONFIG)/os/CONFIG_COMPAT
-
--include $(CONFIG)/RELEASE
--include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH)
-
-include $(CONFIG)/CONFIG_COMMON
-
-#  EPICS-specific build options
-#
-include $(CONFIG)/CONFIG_BASE
-include $(CONFIG)/CONFIG_BASE_VERSION
-
-#  Site-specific build options
-#
-include $(CONFIG)/CONFIG_SITE
-
-#  Host architecture specific definitions
-#
-include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).Common
--include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-
-
-ifdef T_A
-
-#  Cross compile specific definitions
-#
-ifneq ($(EPICS_HOST_ARCH),$(T_A))
-include $(CONFIG)/CONFIG.CrossCommon
-endif
-
-#  Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.Common.$(T_A)
-
-#  Host-Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
-
-#  Site specific target and host-target definitions
-#
--include $(CONFIG)/os/CONFIG_SITE.Common.$(T_A)
--include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-
-endif
-
-#  User specific definitions
-#
--include $(HOME)/configure/CONFIG
--include $(HOME)/os/configure/CONFIG.Host.$(HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.Host.$(EPICS_HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.$(HOST_ARCH).Common
--include $(HOME)/os/configure/CONFIG.$(EPICS_HOST_ARCH).Common
-ifdef T_A
--include $(HOME)/configure/CONFIG.$(OS_CLASS)
--include $(HOME)/configure/CONFIG.Target.$(T_A)
--include $(HOME)/configure/CONFIG.Common.$(T_A)
--include $(HOME)/configure/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.Target.$(T_A)
--include $(HOME)/configure/os/CONFIG.Common.$(T_A)
--include $(HOME)/configure/os/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
-endif
-
-#  All options
-#   may be overridden here.
-#
-# EXAMPLES
-# --------
-#  Build client objects statically ?  must be either YES or NO
-#STATIC_BUILD=NO
-#  Host build optimization,   must be either YES or NO
-#HOST_OPT=YES
-#  Cross build optimization,  must be either YES or NO
-#CROSS_OPT=YES
-#  Generate Verbose Compiler Warnings for host build,  must be either YES or NO
-#HOST_WARN=YES
-#  Generate Verbose Compiler Warnings for cross compile builds,  must be either YES or NO
-#CROSS_WARN=YES
-#etc.
-
-#CROSS_COMPILER_TARGET_ARCHS=mv167
-#ANSI=GCC
-#CPLUSPLUS=G++
-#CMPLR=STRICT
-#CXXCMPLR=STRICT
-

configure/CONFIG.CrossCommon

@@ -1,7 +0,0 @@
-# Cross compiler default definitions
-
-BUILD_CLASS = CROSS
-
-ANSI = GCC
-CPLUSPLUS = G++
-

configure/CONFIG_ADDONS

@@ -1,268 +0,0 @@
-# $Id#
-#
-#	check for add-on CFLAGS and CXXFLAGS
-#
-#	Rules:
-#	1) USR_CFLAGS is used
-#	2) if there is a special USR_CFLAGS_$(OS_CLASS), it's
-#	   appended to 1)
-#	3) if there is no special defined, but a generic USR_CFLAGS_DEFAULT,
-#	   this one is appended
-#	4) if you have the special case that your USR_CFLAGS_$(OS_CLASS) is
-#	   empty but you don't want 3), you have to define it as '-nil-', e.g.:
-#		USR_CFLAGS = <defines for all systems>
-#		USR_CFLAGS_sun4 = -nil-
-#		USR_CFLAGS_DEFAULT = <defines for most systems, not sun4>
-#
-#	These rules apply to these Makefile-variables:
-#	USR_CFLAGS	C flags
-#	USR_CXXFLAGS	C++ flags
-#	USR_CPPFLAGS	c preprocesser flags
-#	INC		include-files to install
-#	LIBSRCS		source files for building library
-#	PROD_LIBS	EPICS libs needed by PROD and TESTPROD
-#	USR_LIBS	NONEPICS libs needed by PROD and TESTPROD
-#	USR_LDFLAGS	ld flags
-#	SYS_PROD_LIBS	system libs needed by PROD and TESTPROD
-#	PROD		products to build and install
-#	SCRIPTS		scripts to install
-#	USR_INCLUDES	include directories
-#
-#	Remark:
-#	If you define INC, e.g. INC = getopt.h, the source
-#	(getopt.h) must be in the source directory (..) and/or
-#	in one or more ../os/<OS_CLASS> directories.
-#	The INC source files cannot be created by the build.
-#
-
-ifneq ($(strip $(USR_CFLAGS_$(OS_CLASS))),)
-USR_CFLAGS+=$(subst -nil-,,$(USR_CFLAGS_$(OS_CLASS)))
-else
-ifdef USR_CFLAGS_DEFAULT
-USR_CFLAGS+=$(USR_CFLAGS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_INCLUDES_$(OS_CLASS))),)
-USR_INCLUDES+=$(subst -nil-,,$(USR_INCLUDES_$(OS_CLASS)))
-else
-ifdef USR_INCLUDES_DEFAULT
-USR_INCLUDES+=$(USR_INCLUDES_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_CXXFLAGS_$(OS_CLASS))),)
-USR_CXXFLAGS+=$(subst -nil-,,$(USR_CXXFLAGS_$(OS_CLASS)))
-else
-ifdef USR_CXXFLAGS_DEFAULT
-USR_CXXFLAGS+=$(USR_CXXFLAGS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_CPPFLAGS_$(OS_CLASS))),)
-USR_CPPFLAGS+=$(subst -nil-,,$(USR_CPPFLAGS_$(OS_CLASS)))
-else
-ifdef USR_CPPFLAGS_DEFAULT
-USR_CPPFLAGS+=$(USR_CPPFLAGS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_LDFLAGS_$(OS_CLASS))),)
-USR_LDFLAGS+=$(subst -nil-,,$(USR_LDFLAGS_$(OS_CLASS)))
-else
-ifdef USR_LDFLAGS_DEFAULT
-USR_LDFLAGS+=$(USR_LDFLAGS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(HTMLS_$(OS_CLASS))),)
-HTMLS+=$(subst -nil-,,$(HTMLS_$(OS_CLASS)))
-else
-ifdef HTMLS_DEFAULT
-HTMLS+=$(HTMLS_DEFAULT)
-endif
-endif
-
-#	check for special includes:
-#
-ifneq ($(strip $(INC_$(OS_CLASS))),)
-#	os-specific includes go to the include/os-directory:
-INC += $(subst -nil-,,$(INC_$(OS_CLASS)))
-else
-ifdef INC_DEFAULT
-INC += $(INC_DEFAULT)
-endif
-endif
-
-#	concat specific library contents (if defined)
-#
-ifneq ($(strip $(LIBSRCS_$(OS_CLASS))),)
-LIBSRCS += $(subst -nil-,,$(LIBSRCS_$(OS_CLASS)))
-else
-ifdef LIBSRCS_DEFAULT
-LIBSRCS+=$(LIBSRCS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(SRCS_$(OS_CLASS))),)
-SRCS += $(subst -nil-,,$(SRCS_$(OS_CLASS)))
-else
-ifdef SRCS_DEFAULT
-SRCS+=$(SRCS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(PROD_SRCS_$(OS_CLASS))),)
-PROD_SRCS += $(subst -nil-,,$(PROD_SRCS_$(OS_CLASS)))
-else
-ifdef PROD_SRCS_DEFAULT
-PROD_SRCS+=$(PROD_SRCS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(BIN_INSTALLS_$(OS_CLASS))),)
-BIN_INSTALLS+=$(subst -nil-,,$(BIN_INSTALLS_$(OS_CLASS)))
-else
-ifdef BIN_INSTALLS_DEFAULT
-BIN_INSTALLS+=$(BIN_INSTALLS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(OBJS_$(OS_CLASS))),)
-OBJS+=$(subst -nil-,,$(OBJS_$(OS_CLASS)))
-else
-ifneq (,$(strip $(OBJS_DEFAULT)))
-OBJS+=$(OBJS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(OBJS_IOC_$(OS_CLASS))),)
-OBJS_IOC+=$(subst -nil-,,$(OBJS_IOC_$(OS_CLASS)))
-else
-ifneq (,$(strip $(OBJS_IOC_DEFAULT)))
-OBJS_IOC+=$(OBJS_IOC_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(OBJS_HOST_$(OS_CLASS))),)
-OBJS_HOST+=$(subst -nil-,,$(OBJS_HOST_$(OS_CLASS)))
-else
-ifneq (,$(strip $(OBJS_HOST_DEFAULT)))
-OBJS_HOST+=$(OBJS_HOST_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(LIBOBJS_$(OS_CLASS))),)
-LIBOBJS+=$(subst -nil-,,$(LIBOBJS_$(OS_CLASS)))
-else
-ifneq (,$(strip $(LIBOBJS_DEFAULT)))
-LIBOBJS+=$(LIBOBJS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(LIBRARY_$(OS_CLASS))),)
-LIBRARY+=$(subst -nil-,,$(LIBRARY_$(OS_CLASS)))
-else
-ifneq (,$(strip $(LIBRARY_DEFAULT)))
-LIBRARY+=$(LIBRARY_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(LIBRARY_IOC_$(OS_CLASS))),)
-LIBRARY_IOC+=$(subst -nil-,,$(LIBRARY_IOC_$(OS_CLASS)))
-else
-ifneq (,$(strip $(LIBRARY_IOC_DEFAULT)))
-LIBRARY_IOC+=$(LIBRARY_IOC_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(LIBRARY_HOST_$(OS_CLASS))),)
-LIBRARY_HOST+=$(subst -nil-,,$(LIBRARY_HOST_$(OS_CLASS)))
-else
-ifneq (,$(strip $(LIBRARY_HOST_DEFAULT)))
-LIBRARY_HOST+=$(LIBRARY_HOST_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(PROD_LIBS_$(OS_CLASS))),)
-PROD_LIBS += $(subst -nil-,,$(PROD_LIBS_$(OS_CLASS)))
-else
-ifdef PROD_LIBS_DEFAULT
-PROD_LIBS += $(PROD_LIBS_DEFAULT)
-endif
-endif
-
-ifneq ($(strip $(USR_LIBS_$(OS_CLASS))),)
-USR_LIBS += $(subst -nil-,,$(USR_LIBS_$(OS_CLASS)))
-else
-ifdef USR_LIBS_DEFAULT
-USR_LIBS += $(USR_LIBS_DEFAULT)
-endif
-endif
-
-#
-#	concat specific library contents (if defined) to SYS_PROD_LIBS
-#
-ifneq ($(strip $(SYS_PROD_LIBS_$(OS_CLASS))),)
-SYS_PROD_LIBS += $(subst -nil-,,$(SYS_PROD_LIBS_$(OS_CLASS)))
-else
-ifdef SYS_PROD_LIBS_DEFAULT
-SYS_PROD_LIBS += $(SYS_PROD_LIBS_DEFAULT)
-endif
-endif
-
-#
-#	concat specific products
-#
-ifneq ($(strip $(PROD_$(OS_CLASS))),)
-PROD += $(subst -nil-,,$(PROD_$(OS_CLASS)))
-else
-ifdef PROD_DEFAULT
-PROD += $(PROD_DEFAULT)
-endif
-endif
-
-#
-#	concat specific products
-#
-ifneq ($(strip $(TESTPROD_$(OS_CLASS))),)
-TESTPROD += $(subst -nil-,,$(TESTPROD_$(OS_CLASS)))
-else
-ifdef TESTPROD_DEFAULT
-TESTPROD += $(TESTPROD_DEFAULT)
-endif
-endif
-
-#
-#	concat specific scripts
-#
-ifneq ($(strip $(SCRIPTS_$(OS_CLASS))),)
-SCRIPTS += $(subst -nil-,,$(SCRIPTS_$(OS_CLASS)))
-else
-ifdef SCRIPTS_DEFAULT
-SCRIPTS += $(SCRIPTS_DEFAULT)
-endif
-endif
-
-#
-#	concat specific resource files
-#
-ifneq ($(strip $(RCS_$(OS_CLASS))),)
-RCS += $(subst -nil-,,$(RCS_$(OS_CLASS)))
-else
-ifdef RCS_DEFAULT
-RCS += $(RCS_DEFAULT)
-endif
-endif
-
-#
-#	concat specific sequencer flags
-#
-ifneq ($(strip $(SNCFLAGS_$(OS_CLASS))),)
-SNCFLAGS += $(subst -nil-,,$(SNCFLAGS_$(OS_CLASS)))
-else
-ifdef SNCFLAGS_DEFAULT
-SNCFLAGS += $(SNCFLAGS_DEFAULT)
-endif
-endif
-

configure/CONFIG_BASE

@@ -1,98 +0,0 @@
-ifndef EPICS_BASE
-EPICS_BASE = $(INSTALL_LOCATION)
-endif
-
-#---------------------------------------------------------------
-# Epics base directories
-
-EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
-EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
-EPICS_EXTENSIONS_HOST_BIN = $(EPICS_EXTENSIONS)/bin/$(EPICS_HOST_ARCH)
-EPICS_EXTENSIONS_HOST_LIB = $(EPICS_EXTENSIONS)/lib/$(EPICS_HOST_ARCH)
-EPICS_BASE_INCLUDE  = $(EPICS_BASE)/include
-
-ifdef T_A
-EPICS_BASE_LIB      = $(EPICS_BASE)/lib/$(T_A)
-EPICS_BASE_BIN      = $(EPICS_BASE)/bin/$(T_A)
-endif
-
-#Definitions for extensions convenience
-As_DIR              = $(EPICS_BASE_LIB)
-ca_DIR              = $(EPICS_BASE_LIB)
-cas_DIR             = $(EPICS_BASE_LIB)
-Com_DIR             = $(EPICS_BASE_LIB)
-rsrvIoc_DIR         = $(EPICS_BASE_LIB)
-registryIoc_DIR     = $(EPICS_BASE_LIB)
-asHost_DIR          = $(EPICS_BASE_LIB)
-asIoc_DIR           = $(EPICS_BASE_LIB)
-dbIoc_DIR           = $(EPICS_BASE_LIB)
-dbStaticHost_DIR    = $(EPICS_BASE_LIB)
-dbStaticIoc_DIR     = $(EPICS_BASE_LIB)
-gdd_DIR             = $(EPICS_BASE_LIB)
-
-#---------------------------------------------------------------
-# For applications and extensions
-
-# add epics/base include directories
-ifneq ($(EPICS_BASE),$(TOP))
-ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
-INSTALL_INCLUDES += \
-       -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) \
-       -I$(EPICS_BASE_INCLUDE)
-
-endif
-endif
-
-#---------------------------------------------------------------
-# Version number for base shared libraries (and win32 products)
-
-ifeq ($(EPICS_BASE),$(TOP))
-SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
-PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
-endif # EPICS_BASE
-
-#---------------------------------------------------------------
-# Epics base c preprocessor flags
-
-# c++ exceptions
-CXX_EXCEPTIONS = YES
-CXX_EXCEPTIONS_FLAGS_YES =
-CXX_EXCEPTIONS_FLAGS_NO = -DnoExceptionsFromCXX
-EPICS_BASE_CPPFLAGS = $(CXX_EXCEPTIONS_FLAGS_$(CXX_EXCEPTIONS))
-
-# osithread default stack
-OSITHREAD_USE_DEFAULT_STACK = YES
-OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
-OSITHREAD_DEFAULT_STACK_FLAGS_NO =
-EPICS_BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
-
-#---------------------------------------------------------------
-# Epics base build tools and tool flags
-
-# private versions of lex/yacc from EPICS
-EYACC = $(EPICS_BASE_HOST_BIN)/antelope$(HOSTEXE)
-ELEX = $(EPICS_BASE_HOST_BIN)/e_flex$(HOSTEXE) -S$(EPICS_BASE_INCLUDE)/flex.skel.static
-YACC  = $(EYACC)
-LEX   = $(ELEX)
-
-# state notation language compiler (installed from base/src/sequencer)
-SNC = $(SEQ)/bin/$(EPICS_HOST_ARCH)/snc$(HOSTEXE)
-
-# adl2dl 
-ADL2DL = $(EPICS_EXTENSIONS_HOST_BIN)/adl2dl
-
-# sch2edif compiler and flags
-SCH2EDIF = sch2edif
-SCH2EDIF_PATH =
-SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(EPICS_EXTENSIONS)/templates/capfast/sym+
-SCH2EDIF_FLAGS =
- 
-# e2db and flags
-#    - again there is an assumption where edb.def is installed.
-E2DB = $(EPICS_EXTENSIONS_HOST_BIN)/e2db
-E2DB_SYSFLAGS = -ate -d $(EPICS_EXTENSIONS)/templates/capfast/edb.def
-E2DB_FLAGS =
-
-#dbst 
-DBST = $(EPICS_EXTENSIONS_HOST_BIN)/dbst
-

configure/CONFIG_BASE_VERSION

@@ -1,20 +0,0 @@
-#
-#  $Id$
-#
-#  EPICS Version information
-#
-# This file is interpreted by the Bourne Shell (MakeRelease), so spaces are
-# not allowed around the '=' signs or in unquoted values.
-#
-
-EPICS_VERSION=3
-EPICS_REVISION=14
-EPICS_MODIFICATION=0
-EPICS_UPDATE_NAME=alpha
-EPICS_UPDATE_LEVEL=1
-
-EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}"
-
-CVS_DATE="\$$Date$$"
-CVS_TAG="\$$Name$$"
-

configure/CONFIG_COMMON

@@ -1,379 +0,0 @@
-#
-#  $Id$
-#
-#  CONFIG_COMMON
-#
-#  This file is to be maintained by the community.
-#
-# Common Configuration Information 
-
-#-------------------------------------------------------
-# Build architectures
-
-# CROSS1 will be defined only when CROSS_COMPILER_HOST_ARCHS is NOT defined
-CROSS1 = $(CROSS_COMPILER_TARGET_ARCHS$(word 1,$(CROSS_COMPILER_HOST_ARCHS)))
-
-# CROSS2 will be defined only when CROSS_COMPILER_HOST_ARCHS is defined
-# and EPICS_HOST_ARCH is one of it's words  
-CROSS2 = $(CROSS_COMPILER_TARGET_ARCHS$(filter-out 1,$(words $(filter $(EPICS_HOST_ARCH),$(CROSS_COMPILER_HOST_ARCHS)))))
-
-BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
-
-#-------------------------------------------------------
-# Build class default, HOST or CROSS, CONFIG will override 
-BUILD_CLASS = HOST
-
-#-------------------------------------------------------
-# Divider and suffix
-DIVIDER = .
-OBJ = .
-RES = .
-
-#-------------------------------------------------------
-# Default for perl if it's on the PATH,
-# otherwise override this in os/CONFIG_SITE.<host_arch>.Common
-PERL=perl
-
-#-------------------------------------------------------
-# tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl
-INSTALL_PRODUCT = $(INSTALL)
-INSTALL_LIBRARY = $(INSTALL)
-
-#-------------------------------------------------------
-# Directories
-
-INSTALL_LOCATION            = $(TOP)
-TOOLS                       = $(CONFIG)/tools
-
-INSTALL_LOCATION_LIB        = $(INSTALL_LOCATION)/lib
-INSTALL_LOCATION_BIN        = $(INSTALL_LOCATION)/bin
-
-INSTALL_HOST_BIN            = $(INSTALL_LOCATION_BIN)/$(EPICS_HOST_ARCH)
-INSTALL_HOST_LIB            = $(INSTALL_LOCATION_LIB)/$(EPICS_HOST_ARCH)
-
-INSTALL_INCLUDE             = $(INSTALL_LOCATION)/include
-INSTALL_DOC                 = $(INSTALL_LOCATION)/doc
-INSTALL_HTML                = $(INSTALL_LOCATION)/html
-INSTALL_TEMPLATES           = $(INSTALL_LOCATION)/templates
-INSTALL_DBD                 = $(INSTALL_LOCATION)/dbd
-INSTALL_DB                  = $(INSTALL_LOCATION)/db
-INSTALL_CONFIG              = $(INSTALL_LOCATION)/configure
-INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
-
-ifdef T_A
-
-INSTALL_LIB                 = $(INSTALL_LOCATION_LIB)/$(T_A)
-INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
-INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
-INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
-
-# vpath directories
-GENERIC_SRC_DIRS = .. $(SRC_DIRS)
-OS_SRC_DIRS += . $(foreach dir, $(SRC_DIRS) .., \
-            $(dir)/os/$(OS_CLASS) $(dir)/os/posix $(dir)/os/default )
-ALL_SRC_DIRS = $(OS_SRC_DIRS) $(GENERIC_SRC_DIRS)
-
-# compile line include directories
-INSTALL_INCLUDES += \
-       -I$(INSTALL_INCLUDE)/os/$(OS_CLASS) \
-       -I$(INSTALL_INCLUDE) 
-GENERIC_SRC_INCLUDES = $(addprefix -I, $(GENERIC_SRC_DIRS))
-
-#--------------------------------------------------
-# GNU compiler defaults
-
-GNU_BIN = $(GNU_DIR)/bin
-GNU_LIB = $(GNU_DIR)/lib
-export GCC_EXEC_PREFIX = $(GNU_LIB)/gcc-lib/
-
-GCC_AR = $(GNU_BIN)/$(CMPLR_PREFIX)ar$(CMPLR_SUFFIX) -rc
-GCC_CPP = $(GCC) -x c -E
-GCC_RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX) 
-
-GCC = $(GNU_BIN)/$(CMPLR_PREFIX)cc$(CMPLR_SUFFIX)
-
-GCC_CONFORM_CFLAGS_ANSI = -ansi 
-GCC_CONFORM_CFLAGS_STRICT = -ansi -pedantic
-GCC_CONFORM_CFLAGS_TRAD = -traditional
-GCC_WARN_YES = -Wall
-GCC_WARN_NO = -w
-GCC_OPT_YES = -g -O3
-GCC_OPT_NO = -g
-GCC_STATIC_CFLAGS_YES = -static
-GCC_STATIC_CFLAGS_NO =
-GCC_BUILD_CFLAGS_CROSS = -B$(GNU_LIB)/gcc-lib/ -nostdinc
-GCC_BUILD_CPPFLAGS_CROSS = -nostdinc
-GCC_SHRLIB_LDFLAGS_YES =  -shared
-GCC_CODE_CPPFLAGS = -D_REENTRANT
-GCC_POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS
-
-G++ = $(GNU_BIN)/$(CMPLR_PREFIX)cc$(CMPLR_SUFFIX)
-
-G++_CONFORM_CFLAGS_NORMAL = -ansi -pedantic
-G++_CONFORM_CFLAGS_STRICT = -ansi -pedantic
-#G++_WARN_YES = -Wall -Weffc++
-G++_WARN_YES = -Wall 
-G++_WARN_NO = -w
-G++_OPT_YES = -g -O3
-G++_OPT_NO = -g
-G++_STATIC_CFLAGS_YES = -static
-G++_STATIC_CFLAGS_NO =
-G++_SHRLIB_LDFLAGS_YES =  -shared
-G++_CODE_CPPFLAGS = -D_REENTRANT
-G++_POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS
-
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-G++_DEPENDS_FLAG = -MM
-
-#--------------------------------------------------
-# Target filename definitions
-OBJSNAME = $(addsuffix $(OBJ),$(OBJS))
-PRODNAME = $(addsuffix $(EXE),$(PROD))
-TESTPRODNAME = $(addsuffix $(EXE),$(TESTPROD))
-
-#---------------------------------------------------------------
-# Directory targets
-
-DIRECTORY_TARGETS += $(INSTALL_DBD) $(INSTALL_INCLUDE)
-
-#--------------------------------------------------
-# obj files
-
-TARGET_OBJS = $(addsuffix $(OBJ),$(basename $($*_OBJS)))
-
-PROD_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(PROD_SRCS)))
-PROD_LD_OBJS = $(TARGET_OBJS) $(PROD_OBJS)
-
-LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(LIBSRCS)))
-LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
-
-#--------------------------------------------------
-# resource(WIN32) files
-
-TARGET_RESS = $(addsuffix $(RES),$(basename $($*_RCS)))
-
-PROD_RESS = $(addsuffix $(RES),$(basename $(RCS) $(PROD_RCS)))
-PROD_LD_RESS = $(TARGET_RESS) $(PROD_RESS)
-
-LIBRARY_RESS = $(addsuffix $(RES),$(basename $(RCS) $(LIBRARY_RCS)))
-LIBRARY_LD_RESS = $(TARGET_RESS) $(LIBRARY_RESS)
-
-#--------------------------------------------------
-# WIN95/NT source browser
-PROD_BAF = $(addsuffix $(BAF), $(basename $(PROD)))
-LIB_BAF_IOC=$(addsuffix $(BAF),$(basename $(LIBRARY_IOC)))
-LIB_BAF_HOST=$(addsuffix $(BAF),$(basename $(LIBRARY_HOST)))
-
-#--------------------------------------------------
-# dbExpand flags
-
-INSTALL_DBDFLAGS = -I $(INSTALL_LOCATION)/dbd
-
-#--------------------------------------------------
-# C preprocessor, compiler, and linker flag defaults
-
-# Build class (CROSS,HOST) flags
-BUILD_CLASS_CFLAGS = $($(ANSI)_BUILD_CFLAGS_$(BUILD_CLASS))
-BUILD_CLASS_CPPFLAGS = $($(ANSI)_BUILD_CPPFLAGS_$(BUILD_CLASS))
-
-# C++ template flag
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# Code (position independant and  reentrant) flags
-CODE_CFLAGS = $($(ANSI)_CODE_CFLAGS)
-CODE_CXXFLAGS = $($(CPLUSPLUS)_CODE_CFLAGS)
-
-# Target architecture specific (solaris,sun4,mv167,...) flags
-ARCH_DEP_CPPFLAGS =
-ARCH_DEP_CFLAGS =
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-ARCH_DEP_LDFLAGS =
-ARCH_DEP_LDLIBS =
-
-# Target operating system specific (Unix,Vx,WIN32...) flags
-OP_SYS_CPPFLAGS =
-OP_SYS_CFLAGS =
-OP_SYS_LDFLAGS =
-OP_SYS_INCLUDES =
-OP_SYS_LDLIBS =
-
-# SOURCE* used by WIN32 only
-SOURCE_CFLAG =
-SOURCE_CXXCFLAG =
-
-# Makefile specific flags
-USR_INCLUDES =
-USR_CFLAGS =
-USR_CXXFLAGS =
-USR_LDFLAGS =
-USR_LDLIBS =
-USR_CPPFLAGS =
-USR_DBDFLAGS =
-USR_ARFLAGS =
-
-# Target specific options
-TARGET_INCLUDES = $($(basename $@)_INCLUDES) $($(basename $@)_INCLUDES_$(OS_CLASS))
-TARGET_CFLAGS = $($(basename $@)_CFLAGS) $($(basename $@)_CFLAGS_$(OS_CLASS))
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS) $($(basename $@)_CXXFLAGS_$(OS_CLASS))
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS) $($(basename $@)_LDFLAGS_$(OS_CLASS))
-TARGET_LDLIBS = $($(basename $@)_LDLIBS) $($(basename $@)_LDLIBS_$(OS_CLASS))
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS) $($(basename $@)_CPPFLAGS_$(OS_CLASS))
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS) $($(basename $@)_SNCFLAGS_$(OS_CLASS))
-
-# POSIX specific flags
-POSIX_CPPFLAGS = $($(ANSI)_POSIX_CPPFLAGS)
-
-# CMPLR level of ansi conformance flags
-CONFORM_CFLAGS = $($(ANSI)_CONFORM_CFLAGS_$(CMPLR))
-CONFORM_CXXFLAGS = $($(CPLUSPLUS)_CONFORM_CFLAGS_$(CMPLR))
-
-# Warnings flags
-WARN_CFLAGS = $($(ANSI)_WARN_$($(BUILD_CLASS)_WARN))
-WARN_CXXFLAGS = $($(CPLUSPLUS)_WARN_$($(BUILD_CLASS)_WARN))
-
-# Optimization flags
-OPT_CFLAGS = $($(ANSI)_OPT_$($(BUILD_CLASS)_OPT))
-OPT_CXXFLAGS = $($(CPLUSPLUS)_OPT_$($(BUILD_CLASS)_OPT))
-OPT_LDFLAGS =
-
-# Static build flags
-STATIC_CFLAGS = $($(ANSI)_STATIC_CFLAGS_$(STATIC_BUILD))
-STATIC_CXXCFLAGS = $($(CPLUSPLUS)_STATIC_CFLAGS_$(STATIC_BUILD))
-STATIC_LDFLAGS = $($(ANSI)_STATIC_LDFLAGS_$(STATIC_BUILD))
-STATIC_LDLIBS = $($(ANSI)_STATIC_LDLIBS_$(STATIC_BUILD))
-
-# Depends flag
-DEPENDS_FLAG = $($(CPLUSPLUS)_DEPENDS_FLAG)
-
-#--------------------------------------------------
-# Flags
-
-INCLUDES = -I. $(USR_INCLUDES) $(INSTALL_INCLUDES) \
-    $(TARGET_INCLUDES) $(GENERIC_SRC_INCLUDES) $(OP_SYS_INCLUDES)
-
-CFLAGS = $(CONFORM_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS) $(WARN_CFLAGS)\
- $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(CODE_CFLAGS)\
- $(STATIC_CFLAGS) $(OP_SYS_CFLAGS)
-
-CXXFLAGS = $(CONFORM_CXXFLAGS) $(OPT_CXXFLAGS) $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS)\
- $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS)\
- $(STATIC_CXXCFLAGS) $(OP_SYS_CFLAGS) $(TEMPL_INST_CXXFLAG)
-
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(DEPLIB_LDFLAGS)\
- $(ARCH_DEP_LDFLAGS) $(STATIC_LDFLAGS) $(OP_SYS_LDFLAGS)
-
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(DEPLIB_LDLIBS) $(ARCH_DEP_LDLIBS)\
- $(STATIC_LDLIBS) $(OP_SYS_LDLIBS)
-
-CPPFLAGS += $(POSIX_CPPFLAGS) $(EPICS_BASE_CPPFLAGS)\
- $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)
-
-CPPSNCFLAGS = $(CPPFLAGS) $(INCLUDES)
-
-DBDFLAGS = $(USR_DBDFLAGS) -I . -I .. $(INSTALL_DBDFLAGS)
-
-#--------------------------------------------------
-# ar definition default
-AR = $($(ANSI)_AR)
-ARFLAGS =
-ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
-
-#--------------------------------------------------
-# C compiler
-CC = $($(ANSI)) $(BUILD_CLASS_CFLAGS)
-CPP =  $($(ANSI)_CPP) $(BUILD_CLASS_CPPFLAGS)
-RANLIB =  $($(ANSI)_RANLIB)
-
-#--------------------------------------------------
-# C++ compiler
-CXX = $($(CPLUSPLUS)) $(BUILD_CLASS_CFLAGS)
-
-#--------------------------------------------------
-# Build compile line here
-
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(INCLUDES) -c $(SOURCE_FLAG)
-COMPILE.cpp = $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(INCLUDES) -c $(SOURCE_CXXFLAG)
-
-#--------------------------------------------------
-# depends definition 
-TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY_HOST) $(LIBRARY_IOC), $($(name)_SRCS))
-SRC_FILES = $(foreach src, $(LIBSRCS) $(SRCS) $(PROD_SRCS) $(TARGET_SRCS) , \
-    $(firstword  $(wildcard $(addsuffix /$(src),$(ALL_SRC_DIRS))) $(src)))
-DEPENDS_RULE = -$(COMPILE.cpp) $(DEPENDS_FLAG) $(SRC_FILES) > DEPENDS
-
-#---------------------------------------------------------------
-# Names of installed items 
-#
-#	each list starts with the destination directory name(s)
-#	to make sure it's there
-
-INSTALL_PROD= $(PRODNAME:%= $(INSTALL_BIN)/%)
-INSTALL_LIBS= $(LIBNAME:%=$(INSTALL_LIB)/%)
-INSTALL_MUNCHS= $(MUNCHNAME:%=$(INSTALL_LIB)/%)
-INSTALL_SHRLIBS= $(SHRLIBNAME:%=$(INSTALL_SHRLIB)/%)
-INSTALL_DLL_LINK_LIBS=$(DLL_LINK_LIBNAME:%=$(INSTALL_LIB)/%)
-INSTALL_TCLLIBS=$(TCLLIBNAME:%=$(INSTALL_TCLLIB)/%)
-INSTALL_TCLINDEX=$(TCLINDEX:%=$(INSTALL_TCLLIB)/%)
-INSTALL_SCRIPTS = $(SCRIPTS:%= $(INSTALL_BIN)/%)
-INSTALL_OBJS = $(OBJSNAME:%= $(INSTALL_BIN)/%)
-
-INCREC +=$(RECTYPES) $(MENUS)
-INSTALL_INCREC = $(INCREC:%= $(INSTALL_INCLUDE)/%)
-INSTALL_DOCS = $(DOCS:%= $(INSTALL_DOC)/%)
-INSTALL_HTMLS = $(HTMLS:%= $(INSTALL_HTML)/$(HTMLS_DIR)/%)
-
-INSTALL_TEMPLATE = $(addprefix $(INSTALL_TEMPLATES_SUBDIR)/, \
-                   $(subst $(CONFIG),top/configure,$(TEMPLATES)))
-INSTALL_CONFIGS = $(CONFIGS:%= $(INSTALL_CONFIG)/%)
-
-INSTALL_BPTS = $(BPTS:%= $(INSTALL_DBD)/%)
-INSTALL_DBS = $(DBDINSTALL:%= $(INSTALL_DBD)/%)\
-        $(RECTYPES:%.h= $(INSTALL_DBD)/%.dbd)\
-        $(MENUS:%.h= $(INSTALL_DBD)/%.dbd)
-
-INSTALL_DBDNAME = $(DBDNAME:%= $(INSTALL_DBD)/%)
-
-#---------------------------------------------------------------
-#
-# auto determine the directory paths that things are installed to
-# RULES:
-# 1) found in any one of several os specific area 
-#       => install to $(INSTALL_INCLUDE)/os/$(OS_CLASS)
-# 2) not foundin (1) and found in generic area 
-#       => install to $(INSTALL_INCLUDE)
-# 3) not found in (1) or (2) then may be (not yet) computer generated 
-#       => install into $(INSTALL_INCLUDE)/os/$(OS_CLASS) and let
-#       build rules work on vpath
-#
-# These rules guarantee that the users include from
-# no more than two directories
-#
-INSTALL_INC += $(foreach inc, $(INC), \
-    $(firstword \
-        $(OS_INSTALL_INC) \
-        $(GENERIC_INSTALL_INC) \
-        $(GENERATED_INSTALL_INC) ) )
-
-#
-# Rule 1
-#
-OS_INSTALL_INC = $(addprefix $(INSTALL_INCLUDE)/os/$(OS_CLASS)/, $(INSTALL_INC_ggg) )
-INSTALL_INC_ggg = $(foreach dir, $(OS_SRC_DIRS), $(INSTALL_INC_fff)  )
-INSTALL_INC_fff = $(subst $(dir)/, , $(INSTALL_INC_eee) )
-INSTALL_INC_eee = $(wildcard $(addsuffix /$(inc), $(dir)) )
-
-#
-# Rule 2
-#
-GENERIC_INSTALL_INC = $(addprefix $(INSTALL_INCLUDE)/, $(INSTALL_INC_ccc) )
-INSTALL_INC_ccc = $(foreach dir, .. $(SRC_DIRS), $(INSTALL_INC_bbb)  )
-INSTALL_INC_bbb = $(subst $(dir)/, , $(INSTALL_INC_aaa) )
-INSTALL_INC_aaa = $(wildcard $(addsuffix /$(inc), $(dir)) )
-
-#
-# Rule 3
-#
-GENERATED_INSTALL_INC = $(INSTALL_INCLUDE)/os/$(OS_CLASS)/$(inc)
-
-endif

configure/CONFIG_ENV

@@ -1,156 +0,0 @@
-#   $Id$
-#   Author: Andrew Johnson
-#   Date:   20 April 1995
-#
-#   Experimental Physics and Industrial Control System (EPICS)
-#
-#   CONFIG_ENV - EPICS Environment Parameter configuration file
-#
-# This file is interpreted by the Bourne Shell, so spaces are 
-# not allowed around the '=' signs or in unquoted values.
-# Makefile variables are not defined here.
-#
-# Note: This file is read by base/src/libCom/env/bldEnvdata.pl,
-# so the variable definitions in here should be kept 'simple':
-#   VAR=VALUE
-# each one on a single line.
-#
-
-
-#  Default environment settings
-
-# Channel Access:
-# EPICS_CA_ADDR_LIST 
-#   Augment beacon/search dest ip addr list
-#   from white space separated ip addresses in this
-#   environment variable. "Quote" if more than one addr.
-# EPICS_CA_AUTO_ADDR_LIST 
-#   YES = augment beacon/search dest ip
-#   addr list from network interfaces found; NO = only use
-#   EPICS_CA_ADDR_LIST to create this list.
-# EPICS_CA_CONN_TMO 
-#   after not seeing a server beacon for this number
-#   of seconds the clients will send an echo request over
-#   tcp/ip to verify the connection.
-# EPICS_CA_REPEATER_PORT CA repeater port number.
-# EPICS_CA_SERVER_PORT CA server port number.
-
-EPICS_CA_ADDR_LIST=""
-EPICS_CA_AUTO_ADDR_LIST=YES
-EPICS_CA_CONN_TMO=30.0
-EPICS_CA_REPEATER_PORT=5065
-EPICS_CA_SERVER_PORT=5064
-
-#
-# These parameters are only used by the CA server library
-#
-# EPICS_CA_BEACON_PERIOD 
-#   The quiescent sec between server beacons.
-#
-# EPICS_CAS_INTF_ADDR_LIST
-#   This specifies a list of IP addresses identifying
-#   a limited set of network interfaces for server communication. 
-#
-#   Specifically, this parameter specifies the interfaces from
-#   which the server will accept TCP/IP connections. It also 
-#   specifies that UDP search messages addressed to both
-#   the IP addresses in EPICS_CAS_INTF_ADDR_LIST and also to
-#   the broadcast addresses of corresponding LAN interfaces
-#   will be accepted by the server. If this parameter is empty 
-#   then all UDP search messages and TCP connection requests
-#   addressed to the host are accepted. 
-#
-#   If EPICS_CA_AUTO_ADDR_LIST is NO, then the beacon address list
-#   is not auto configured.
-#
-#   If EPICS_CA_AUTO_ADDR_LIST is YES and EPICS_CAS_INTF_ADDR_LIST
-#   has _not_ been specified then beacons are sent to the broadcast 
-#   addresses of all LAN interfaces and the destination addresses of 
-#   all point-to-point serial interfaces. 
-#
-#   If EPICS_CA_AUTO_ADDR_LIST is YES and EPICS_CAS_INTF_ADDR_LIST
-#   _has_ been specified then beacons are sent to the broadcast address 
-#   of each LAN interface corresponding to an IP address in 
-#   EPICS_CAS_INTF_ADDR_LIST or the destination address of 
-#   a point-to-point serial interfaces corresponding to an IP
-#   address in EPICS_CAS_INTF_ADDR_LIST. 
-#
-#   Beacons may be sent to additional hand configured addresses 
-#   (see the notes below under EPICS_CAS_BEACON_ADDR_LIST).
-#
-# EPICS_CAS_BEACON_ADDR_LIST
-#   If this parameter is specified, or if EPICS_CAS_INTF_ADDR_LIST 
-#   isnt empty, then this parameter is used by the server library to 
-#   augment the list of addresses beacons are sent to. Otherwise
-#   EPICS_CA_ADDR_LIST is used to augment the list of addresses 
-#   beacons are sent to.
-#
-# EPICS_CAS_SERVER_PORT
-#   If this parameter is specified then it
-#   and not EPICS_CA_SERVER_PORT is used to determine the server's
-#   port number. It is possible to have multiple servers on the
-#   same host on the same EPICS_CAS_SERVER_PORT port if the IP
-#   kernel is modern (if it has multicast enhancements). In this
-#   situation all servers will share the same user specified 
-#   UDP port number and will be assigned unique TCP port numbers. 
-#
-#   The fact that the servers may not be using the user specified
-#   port number for TCP will be nearly transparent to EPICS 
-#   3.13 or higher clients that will be locating the servers
-#   using the user specified UDP port number, but will be connecting 
-#   to the servers using whatever TCP port has been assigned.
-#   Unfortunately, a severe limitation exists in most IP
-#   kernels: if multiple servers are listening for search requests 
-#   addressed to the same UDP port then they will all receive a copy 
-#   of each UDP message received by the IP kernel that has a broadcast
-#   destination address. Unfortunately, in many IP kernel 
-#   implementations only one of the servers will receive UDP
-#   messages with a single host (unicast) destination address.
-#
-#   If experiencing trouble getting clients to connect
-#   --------------------------------------------------
-#
-#   o Make sure that the broadcast addresses are identical on the
-#   server's host and on the client's host. This can be checked with
-#   "netstat -i" or "ifconfig -a".
-#   
-#   o Make sure that the client and server are using the same UDP
-#   port. Check the server's port by running "netstat -a | grep nnn"
-#   where nnn is the port number involved. If you do not set 
-#   EPICS_CA_SERVER_PORT or EPICS_CAS_SERVER_PORT 
-#   then the default port will be 5064.
-#   
-#   o Two servers can run on the same host with the same server port number
-#   if the following restrictions are understood (good luck). If the host has a
-#   modern IP kernel it is possible to have two servers on the same UDP port.
-#   It is not possible for two servers to run on the same host using the same 
-#   TCP IP server port. If the CA server library detects that a 2nd server is attempting
-#   to start on the same port as an existing CA server then both servers will use the 
-#   same UDP port if it is a modern IP kernel, and the 2nd server will
-#   be allocated a new TCP port. In this situation the clients will still be
-#   configured to use the same port number for both servers. The clients
-#   will find the 2nd server via the shared UDP port, and transparently
-#   connect to the 2nd server's allocated TCP port. Be aware that If there are 
-#   two server's running on the same host on the same UDP port then they will 
-#   both receive all UDP search requests sent as broadcasts, but will unfortunately (due to 
-#   what I consider to be a real weakness of most IP kernel implementations) only one 
-#   of the servers will typically receive UDP search requests sent to unicast addresses (i.e. 
-#   a specific host's ip address). 
-#
-
-
-EPICS_CA_BEACON_PERIOD=15.0
-EPICS_CAS_INTF_ADDR_LIST=""
-EPICS_CAS_BEACON_ADDR_LIST=""
-EPICS_CAS_SERVER_PORT=
-
-
-# Log Server:
-# EPICS_IOC_LOG_PORT Log server port number etc.
-EPICS_IOC_LOG_PORT=7004
-
-# Other services:
-
-EPICS_CMD_PROTO_PORT=
-EPICS_AR_PORT=7002
-

configure/CONFIG_SITE

@@ -1,104 +0,0 @@
-#
-#  $Id$
-#
-#  CONFIG_SITE  - config file
-#	by Matthew Needes and Mike Bordua
-#
-#  This file is to be modified by the build system manager
-#	only.
-#
-
-
-#  The host architecture performing the build,
-#	i.e.: the arch running DCT/getrel/etc.
-#
-#  Currently Supporting:
-#	sun4
-#	hp700
-#	alpha
-#	solaris
-#	sgi
-#	Linux
-#	WIN32
-#	LynxOS
-#
-#  EPICS_HOST_ARCH is an environment variable
-#  EPICS_HOST_ARCH=$(shell /usr/local/epics/startup/EpicsHostArch)
-
-
-#  The cross-compiler architectures to build EPICS for
-#
-#  Currently Supporting:
-#       vxWorks-486
-#       vxWorks-68040
-#       vxWorks-68040lc
-#       vxWorks-68060
-#       vxWorks-pentium
-#       vxWorks-ppc604
-#       RTEMS-gen68360
-#       RTEMS-mvme167
-#
-CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
-
-
-#  If only a subset of the host architectures perform
-#  the build for the CROSS_COMPILER_TARGET_ARCHS
-#  uncomment the following line and specify them.
-#
-CROSS_COMPILER_HOST_ARCHS=
-
-#  Client ANSI C Compiler (for Host builds)
-#   GCC     GNU			(gcc -ansi)
-#   ACC     OS VENDOR		(sun4/solaris: acc ; hp700: cc -Aa)
-ANSI=ACC
-
-#  C++ Compiler (for Host builds)
-#   G++     GNU C++		(g++)
-#   CCC     OS VENDOR C++	(sun4/solaris: CC ; hp700: aCC)
-CPLUSPLUS=CCC
-
-# Default ANSI level, individual Makefiles will override
-#  if they cannot support ANSI compilation.
-#   STRICT -  ANSI C - force warning flags
-#   ANSI   -  ANSI C
-#   TRAD   -  Standard C - Not appropriate here.
-CMPLR=STRICT
-
-# Default C++ compiler ANSI level
-#   STRICT -  ANSI C++ force strict warning flags
-#   NORMAL -  ANSI C++ optional warning flags
-#   Individual Makefiles may override
-CXXCMPLR=STRICT
-
-#  Build shared libraries?
-#  (archive libraries will also be built)
-#        must be either YES or NO
-#     NOTE: CONFIG_SITE.Host.$(HOST_ARCH) files may override
-#
-#     NOTE WIN32: YES results in a DLL. CONFIG_SITE.Host.WIN32
-#                 distribution file contains YES override
-#
-#     NOTE solaris and sun4: If YES then LD_LIBRARY_PATH must
-#     include fullpathname $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)
-#     for both the base build and when invoking base executables
-SHARED_LIBRARIES=NO
-
-#  Build client objects statically ?
-#        must be either YES or NO
-STATIC_BUILD=NO
-
-#  Host build optimization
-#	must be either YES or NO
-HOST_OPT=YES
-
-#  Cross build optimization
-#	must be either YES or NO
-CROSS_OPT=YES
-
-#  Generate Verbose Compiler Warnings for Host builds
-#	must be either YES or NO
-HOST_WARN=YES
-
-#  Generate Verbose Compiler Warnings for cross compile builds
-#	must be either YES or NO
-CROSS_WARN=YES

configure/CONFIG_SITE_ENV

@@ -1,45 +0,0 @@
-#	$Id$
-#	Author:	Andrew Johnson
-#	Date:	1 May 1995
-#
-#	Experimental Physics and Industrial Control System (EPICS)
-#
-#	CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
-#
-# This file is interpreted by the Bourne Shell, so spaces are 
-# not allowed around the '=' signs or in unquoted values.
-# Makefile variables are not defined here.
-#
-# Note: This file is read by base/src/libCom/env/bldEnvdata.pl,
-# so the variable definitions in here should be kept 'simple':
-#	VAR=VALUE
-# each one on a single line.
-#
-
-#  Site-specific environment settings
-
-# Time service:
-# EPICS_TS_MIN_WEST the local time difference from GMT.
-# EPICS_TS_NTP_INET ntp or Unix time server ip addr.
-
-EPICS_TS_MIN_WEST=360
-EPICS_TS_NTP_INET=
-
-
-# Log Server:
-# EPICS_IOC_LOG_INET 
-#	Log server ip addr.
-# EPICS_IOC_LOG_FILE_NAME 
-#	pathname to the log file.
-# EPICS_IOC_LOG_FILE_LIMIT 
-#	maximum log file size.
-# EPICS_IOC_LOG_FILE_COMMAND 
-# 	A shell command string used to obtain a new 
-#       path name in response to SIGHUP - the new path name will
-#       replace any path name supplied in EPICS_IOC_LOG_FILE_NAME
-
-EPICS_IOC_LOG_INET=
-EPICS_IOC_LOG_FILE_NAME=
-EPICS_IOC_LOG_FILE_COMMAND=
-EPICS_IOC_LOG_FILE_LIMIT=1000000
-

configure/Makefile

@@ -1,17 +0,0 @@
-#
-# $Id$
-#
-
-TOP=..
-
-include $(TOP)/configure/CONFIG
-
-CONFIGS += $(subst ../,,$(wildcard ../CONFIG*))
-CONFIGS += $(subst ../,,$(wildcard ../os/CONFIG*))
-
-CONFIGS += $(subst ../,,$(wildcard ../RELEASE*))
-CONFIGS += $(subst ../,,$(wildcard ../RULES*))
-
-CONFIGS += $(subst ../,,$(wildcard ../tools/*.pl))
-
-include $(TOP)/configure/RULES

configure/RELEASE

@@ -1,7 +0,0 @@
-#RELEASE Location of external products
-#
-# NOTE: RELEASE.$(EPICS_HOST_ARCH) files will override
-
-#  Tornado directory
-#VX_DIR = /usr/local/vw/tornado101
-VX_DIR = /usr/local/vw/tornado20