Oops, off-by-one error...

- option to find() so it follow links
- use of strict
- handle comments correctly when parsing RELEASE

COPYRIGHT_Combined

@@ -1,21 +0,0 @@
-/*      Experimental Physics and Industrial Control System (EPICS)
- *
- *      Copyright 1991, the Regents of the University of California,
- *      and the University of Chicago Board of Governors.
- *
- *      This software was produced under  U.S. Government contracts:
- *      (W-7405-ENG-36) at the Los Alamos National Laboratory,
- *      and (W-31-109-ENG-38) at Argonne National Laboratory.
- *
- *      Initial development by:
- *              The Controls and Automation Group (AT-8)
- *              Ground Test Accelerator
- *              Accelerator Technology Division
- *              Los Alamos National Laboratory
- *
- *      Co-developed with
- *              The Controls and Computing Group
- *              Accelerator Systems Division
- *              Advanced Photon Source
- *              Argonne National Laboratory
- ***********************************************************************/

COPYRIGHT_UniversityOfChicago

@@ -1,45 +0,0 @@
-/*****************************************************************
-                          COPYRIGHT NOTIFICATION
-*****************************************************************
-
-THE FOLLOWING IS A NOTICE OF COPYRIGHT, AVAILABILITY OF THE CODE,
-AND DISCLAIMER WHICH MUST BE INCLUDED IN THE PROLOGUE OF THE CODE
-AND IN ALL SOURCE LISTINGS OF THE CODE.
- 
-(C)  COPYRIGHT 1993 UNIVERSITY OF CHICAGO
- 
-Argonne National Laboratory (ANL), with facilities in the States of 
-Illinois and Idaho, is owned by the United States Government, and
-operated by the University of Chicago under provision of a contract
-with the Department of Energy.
-
-Portions of this material resulted from work developed under a U.S.
-Government contract and are subject to the following license:  For
-a period of five years from March 30, 1993, the Government is
-granted for itself and others acting on its behalf a paid-up,
-nonexclusive, irrevocable worldwide license in this computer
-software to reproduce, prepare derivative works, and perform
-publicly and display publicly.  With the approval of DOE, this
-period may be renewed for two additional five year periods. 
-Following the expiration of this period or periods, the Government
-is granted for itself and others acting on its behalf, a paid-up,
-nonexclusive, irrevocable worldwide license in this computer
-software to reproduce, prepare derivative works, distribute copies
-to the public, perform publicly and display publicly, and to permit
-others to do so.
-
-*****************************************************************
-                                DISCLAIMER
-*****************************************************************
-
-NEITHER THE UNITED STATES GOVERNMENT NOR ANY AGENCY THEREOF, NOR
-THE UNIVERSITY OF CHICAGO, NOR ANY OF THEIR EMPLOYEES OR OFFICERS,
-MAKES ANY WARRANTY, EXPRESS OR IMPLIED, OR ASSUMES ANY LEGAL
-LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR
-USEFULNESS OF ANY INFORMATION, APPARATUS, PRODUCT, OR PROCESS
-DISCLOSED, OR REPRESENTS THAT ITS USE WOULD NOT INFRINGE PRIVATELY
-OWNED RIGHTS.  
-
-*****************************************************************
-LICENSING INQUIRIES MAY BE DIRECTED TO THE INDUSTRIAL TECHNOLOGY
-DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).

LICENSE

@@ -0,0 +1,84 @@
+Copyright (c) 1991-2004 University of Chicago and The Regents of the
+University of California. All rights reserved.
+
+EPICS BASE is distributed subject to the following license conditions:
+
+ SOFTWARE LICENSE AGREEMENT
+ Software: EPICS BASE
+ Versions: 3.13.7 and higher
+
+ 1. The "Software", below, refers to EPICS BASE (in either source code, or
+    binary form and accompanying documentation). Each licensee is
+    addressed as "you" or "Licensee."
+
+ 2. The copyright holders shown above and their third-party licensors
+    hereby grant Licensee a royalty-free nonexclusive license, subject to
+    the limitations stated herein and U.S. Government license rights.
+
+ 3. You may modify and make a copy or copies of the Software for use
+    within your organization, if you meet the following conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement.
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy.
+
+ 4. You may modify a copy or copies of the Software or any portion of it,
+    thus forming a work based on the Software, and distribute copies of
+    such work outside your organization, if you meet all of the following
+    conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement;
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy;
+      c. Modified copies and works based on the Software must carry
+         prominent notices stating that you changed specified portions of
+         the Software.
+
+ 5. Portions of the Software resulted from work developed under a U.S.
+    Government contract and are subject to the following license: the
+    Government is granted for itself and others acting on its behalf a
+    paid-up, nonexclusive, irrevocable worldwide license in this computer
+    software to reproduce, prepare derivative works, and perform publicly
+    and display publicly.
+
+ 6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+    OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
+    UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
+    EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+    BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+    FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME
+    ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
+    OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
+    SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE
+    OR THAT ANY ERRORS WILL BE CORRECTED.
+
+ 7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+    THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
+    OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
+    CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
+    INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY
+    REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF
+    CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR
+    OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE
+    POSSIBILITY OF SUCH LOSS OR DAMAGES.
+
+________________________________________________________________________
+
+This software is in part copyrighted by the BERLINER SPEICHERRING
+GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY), BERLIN, GERMANY.
+
+In no event shall BESSY be liable to any party for direct, indirect,
+special, incidental, or consequential damages arising out of the use of
+this software, its documentation, or any derivatives thereof, even if
+BESSY has been advised of the possibility of such damage.
+
+BESSY specifically disclaims any warranties, including, but not limited
+to, the implied warranties of merchantability, fitness for a particular
+purpose, and non-infringement.  This software is provided on an "as is"
+basis, and BESSY has no obligation to provide maintenance, support,
+updates, enhancements, or modifications.
+________________________________________________________________________
+

MakeRelease

@@ -9,69 +9,6 @@
 #
 #    [-b] - For fully built release
 #
-# $Log$
-# Revision 1.9  1996/09/04 21:41:36  jba
-# Top level dir no longer passed to MakeRelease
-#
-# Revision 1.8  1996/07/02 13:45:09  jba
-# Added dbd and base/config dirs. Removed epics/config and base/rec.
-#
-# Revision 1.7  1996/06/25 21:54:42  jba
-# Command line parm now base dir
-#
-# Revision 1.6  1996/06/07 19:19:10  jba
-# MakeRelease is now in release tar file.
-#
-# Revision 1.5  1996/03/04 21:03:48  jba
-# epicsVersion.h now in src/include.
-#
-# Revision 1.4  1996/02/20 21:03:53  jba
-# Updated README files to reflect directory changes and new installEpics.
-#
-# Revision 1.3  1995/10/03  15:42:26  jba
-# Added *COPYRIGHT* files to release tar file.
-#
-# Revision 1.2  1995/08/28  15:49:54  jba
-# Added startup directory to release tar file
-#
-# Revision 1.1  1995/08/17  20:14:56  jba
-# Added base/tools scripts functionality to base/Makefile, removed scripts
-# Moved base/tools/MakeRelease to base dir.
-#
-# Revision 1.14  1994/12/19  18:42:08  tang
-# Make the args length compatible for HP and SUN.
-#
-# Revision 1.13  1994/12/15  19:19:18  tang
-# Replace -I opt by cat and xargs for tar for HP compatibility.
-#
-# Revision 1.12  1994/12/14  23:57:55  tang
-# Take out \< and \> pair for hp compatible
-#
-# Revision 1.11  1994/10/31  21:44:17  jba
-# Moved print stmnt, added cd $(EPICS)
-#
-# Revision 1.10  1994/10/05  18:29:34  jba
-# Renamed version.h to epicsVersion.h
-#
-# Revision 1.9  1994/09/22  01:41:47  mcn
-# MakeRelease - MAJOR bug fix.  GetVar / MakeDirs - minor fix.
-#
-# Revision 1.8  1994/09/07  20:59:15  mcn
-# Revamped GetVar, modified scripts for new GetVar.
-#
-# Revision 1.7  1994/09/02  20:58:00  mcn
-# minor change.
-#
-# Revision 1.6  1994/08/21  00:56:41  mcn
-# New Stuff
-#
-# Revision 1.5  1994/08/02  18:36:29  mcn
-# Support new configuration.
-#
-# Revision 1.4  1994/07/14  22:13:32  mcn
-# Now include SDR Makefile/Headers
-#
-#
 
 
 if [ ! -d src ]; then
@@ -101,25 +38,26 @@ if [ -z "${EPICS_VERSION}" ];
 
 RELS="R${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}";
 
-echo TOP: Creating ../${RELS}.Tar;
+echo TOP: Creating ../${RELS}.tar;
 
-if [ -f ${RELS}.Tar* ];
+if [ -f ${RELS}.tar* ];
 	then
 		echo "TOP: This release has already been created.";
-		echo "TOP: Remove Tar file or edit config/CONFIG_BASE_VERSION.";
+		echo "TOP: Remove tar file or edit config/CONFIG_BASE_VERSION.";
 		exit 1;
 	fi
 
-# Create list of files and dirs to include in Tar file
+# Create list of files and dirs to include in tar file
 
 cd ..
 
-ls base/README* | xargs tar cvf ${RELS}.Tar
+ls base/README* base/*.bat | xargs tar cvf ${RELS}.tar
 
 ls base/Make* > /tmp/make_release.out.$$;
 
 ls base/*COPYRIGHT* >> /tmp/make_release.out.$$;
 
+
 if [ -d startup ];
 	then
 		find startup -name CVS -prune -o ! -type d -print \
@@ -152,7 +90,7 @@ find base/config -name CVS -prune -o -name SCCS -prune -o ! -type d -print \
 find base/src -name CVS -prune -o -name SCCS -prune -o ! -type d -print \
 		| grep -v '/O\..*$' >> /tmp/make_release.out.$$
 
-cat /tmp/make_release.out.$$ | xargs tar rvf ${RELS}.Tar 
+cat /tmp/make_release.out.$$ | xargs tar rvf ${RELS}.tar 
 		
 rm /tmp/make_release.out.$$
 

Makefile

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # Top Level EPICS Makefile
 #        by Matthew Needes and Mike Bordua
@@ -18,6 +27,18 @@ include $(TOP)/config/CONFIG_BASE
 
 DIRS = src config
 
+INSTALL_BIN = $(INSTALL_LOCATION)/bin/$(HOST_ARCH)
+
+#
+# this bootstraps in makeMakefile.pl (and others) so that it can
+# be used to create the first O.xxxx/Makefile
+#
+PERL_BOOTSTRAP_SCRIPTS = $(notdir $(wildcard $(TOP)/src/tools/*.pl))
+PERL_BOOTSTRAP_SCRIPTS_INSTALL = $(PERL_BOOTSTRAP_SCRIPTS:%=$(INSTALL_BIN)/%)
+all host cross inc rebuild clean depends buildInstall :: $(PERL_BOOTSTRAP_SCRIPTS_INSTALL)
+
+RMDIR=$(PERL) $(TOP)/src/tools/rm.pl -rf
+
 include $(TOP)/config/RULES_TOP
 
 release: 
@@ -28,3 +49,6 @@ built_release:
 	@echo TOP: Creating Fully Built Release...
 	@./MakeRelease -b $(INSTALL_LOCATION)
 
+$(INSTALL_BIN)/%.pl: $(TOP)/src/tools/%.pl
+	$(PERL) $(TOP)/src/tools/installEpics.pl -d -m 555 $< $(INSTALL_BIN)
+

README

@@ -7,36 +7,53 @@ $Id$
 
 Notes:
 
-1. Before you can build or really use EPICS, you must properly set the
-   environemnt variable HOST_ARCH. The epics/startup/HostArch script file
-   has been provided to set HOST_ARCH.
+1. Before you can build or use EPICS, the environemnt variable HOST_ARCH
+   must be set. The base/startup/HostArch script file has been provided
+   to set HOST_ARCH.
 
 2. You must use GNU make (which is now THE supported make utility) for
    the build, gnumake.  Set your path so that a recent version (e.g.
    V3.70) of gnumake is available.
 
+3. You must have perl installed. See the README.Perl in this directory. The
+   config files specify the perl full pathname  as /usr/bin/perl for
+   unix builds and C:\Perl\bin\perl for WIN95/NT builds. You can override
+   these specifications with a CONFIG_SITE_HOST_ARCH.<host_arch> file. 
+
+4. You may need vendors C and C++ compilers in your search path. (Check
+   the definitions of ACC and CCC in CONFIG.Host.<host_arch> or gnu GCC
+   and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified in CONFIG_SITE).
+
+4. For building base you must have echo in your search path. For unix host
+   builds you must also have ar, cp, rm, mv, ranlib, and mkdir in your search
+   path and /bin/chmod must exist. 
+
 ----------------------------------------------------------------------------
    Part 1 - Configuring and Building EPICS Base
 ----------------------------------------------------------------------------
 
-1.1  To configure EPICS, edit the following files:
+1.1  To configure EPICS, edit the following file:
 
    config/CONFIG_SITE      - Build choices/HOST_ARCH/Vx location.
-   config/CONFIG_SITE.*    - Location of X, etc.
-   config/CONFIG           - For overriding specific variables.
+   config/CONFIG_SITE_ENV  - For site-specific environment settings
+
+   For a specific host architecture you may want to edit the following file 
+   config/CONFIG_SITE.Host.<arch>      - Override Host build settings for a host arch
+   config/CONFIG_SITE.Vx.<arch>        - Override Vx build settings for a host arch
+   config/CONFIG_SITE_HOST_ARCH.<arch> - Override build settings for a host arch
+ 
+   Optionally you may want to edit the following files 
+   config/CONFIG_SITE.Host - Override Host build settings for all host archs.
+   config/CONFIG_SITE.Vx   - Override Vx build settings for all host archs.
+   config/CONFIG           - Override build settings for all host archs.
 
 1.2  To add a target architecture to EPICS:
 
    cd base/config
-   cp CONFIG.mv167 CONFIG.YOUR_ARCH
-   edit CONFIG.YOUR_ARCH   - For compiler flags / etc.
+   cp CONFIG.Vx.mv167 CONFIG.Vx.YOUR_ARCH
+   edit CONFIG.Vx.YOUR_ARCH   - For compiler flags / etc.
 
-   cp CONFIG.Vx.68k CONFIG.Vx.YOUR_ARCH_CLASS
-   cp CONFIG_SITE.Vx.68k CONFIG_SITE.Vx.YOUR_ARCH_CLASS
-       - ONLY IF you are adding a new architecture class,
-                 see note in Appendix A.
-
-   edit CONFIG_BASE    - Add architecture to list.
+   edit CONFIG_SITE    - Add architecture to CROSS_COMPILER_TARGET_ARCHS list.
 
 1.3  To build EPICS:
 
@@ -45,11 +62,11 @@ Notes:
                          (Same as "gnumake inc install")
    gnumake all         - Same as "gnumake"
    gnumake clean       - To clean temporary object files.  Top level 
-                         clean will remove all the O.ARCH dirs, not
-                         only those specified in BUILD_ARCHS.
+                         clean will remove the O.ARCH dirs specified
+                         in BUILD_ARCHS.
    gnumake uninstall   - Only available at the top level directory.
                          Cleans directories created by the install.
-   gnumake rebuild     - Same as "gnumake clean uninstall all"
+   gnumake rebuild     - Same as "gnumake clean all"
 
 1.4  "Partial" build commands:
 
@@ -81,7 +98,7 @@ Notes:
 
 NOTES:
 
-   1. EPICS binaries and shellscripts are installed into the directory
+   1. EPICS binaries and shell scripts are installed into the directory
       $(INSTALL_LOCATION)/bin/ARCH.
 
    2. EPICS libraries are installed into the $(INSTALL_LOCATION)/lib/ARCH
@@ -123,26 +140,48 @@ manager.  It specifies:
 	etc.
 
 ----------------------------------------------------------------------------
-CONFIG.ARCH - This file defines a particular architecture.  It
+CONFIG.Host.ARCH - This file defines a particular host architecture.  It
 contains the following variables:
 
-	BUILD_TYPE: Unix / Vx
- 	ARCH_CLASS: 68k / sun4 / hp700 / etc.
+ 	ARCH_CLASS: solaris / sun4 / hp700 / etc.
+        Host architecture OS vendor C and C++ complier variables.
 	Architecture dependent build flags.  The flag names / contents
 		depend on your architecture class.
 ----------------------------------------------------------------------------
+CONFIG_HOST_ARCH.ARCH - This file contains the following variable:
+
+ 	WIND_HOST_TYPE: sun4-solaris2 / sun4-sunos4 /  x86-win32 / etc.
 ----------------------------------------------------------------------------
-CONFIG_SITE.ARCH - Contains site specific definitions pertaining to a
-particular architecture.  This file's primary usefulness is to
+----------------------------------------------------------------------------
+CONFIG.Vx.ARCH - This file defines a particular target architecture.  It
+contains the following variables:
+
+ 	ARCH_CLASS: 68k / sun4 / hp700 / etc.
+	Architecture dependent build flags.  The flag names / contents
+		depend on your architecture class.
+	CMPLR_SUFFIX: Vx GNU cross compiler suffix definition. 
+----------------------------------------------------------------------------
+----------------------------------------------------------------------------
+CONFIG_SITE.BUILD_TYPE.ARCH - Contains site specific definitions pertaining to a
+particular architecture and build type.  This file's primary usefulness is to
 define site specific compile and link flags.
 ----------------------------------------------------------------------------
-CONFIG_COMMON - Contains definitions describing the layout of base.
+CONFIG_COMMON - Contains definitions describing the layout of base 
+	and definitions common to all builds.
+----------------------------------------------------------------------------
+CONFIG.Host.UnixCommon - Contains host definitions common to all Unix archs.
 ----------------------------------------------------------------------------
 CONFIG_BASE -  Defines what subdirectories get built by default under base.
 ----------------------------------------------------------------------------
-RULES.Vx - Rules for building with VxWorks makefiles.
+CONFIG_BASE_VERSION - Defines the version of base. 
 ----------------------------------------------------------------------------
-RULES.Unix - Rules for building with Unix makefiles.
+CONFIG_ENV - EPICS Environment Parameter configuration file.
+----------------------------------------------------------------------------
+CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
+----------------------------------------------------------------------------
+RULES.Vx - Rules for building with Makefile.Vx makefiles.
+----------------------------------------------------------------------------
+RULES.Host - Rules for building with Makefile.Host makefiles.
 ----------------------------------------------------------------------------
 RULES_TOP - Top level rules for building.
 ----------------------------------------------------------------------------
@@ -158,12 +197,16 @@ Filename                  SYS_MGR  ADD_VX_ARCH  ADD_UNIX_ARCH  DEVELOPER
 CONFIG                       m         -             -             m
 CONFIG_SITE                  m         m             m             -
 CONFIG_SITE_ENV              m         -             -             -
-CONFIG.ARCH                  -         c             c             -
+CONFIG.Host.ARCH             -         c             c             -
+CONFIG_HOST_ARCH.ARCH        -         c             c             -
+CONFIG_SITE.Host.ARCH        -         -             -             -
+CONFIG.Vx.ARCH               -         c             c             -
 CONFIG_SITE.ARCH             -         c             c             -
 CONFIG.Vx.ARCH_CLASS         -         c*            -             -
 RULES.Vx                     -         -             -             -
-RULES.Unix                   -         -             -             -
+RULES.Host                   -         -             -             -
 CONFIG_BASE                  -         -             -             -
+CONFIG_BASE_VERSION          -         -             -             -
 CONFIG_COMMON                -         -             -             -
 CONFIG_ENV                   -         -             -             -
 RULES_ARCHS                  -         -             -             -
@@ -187,59 +230,61 @@ RULES_TOP                    -         -             -             -
 
  src/db/Makefile.Vx     (An example EPICS makefile)
     ^   ^
-    |   +--- 3.  RULES.Vx
+    |   +--- 2.  RULES.Vx
     |              Default rules.
-    +------- 2.  CONFIG
-                  ^ ^ ^ ^
-                  | | | |
-                  | | | +- 1. CONFIG_SITE
-                  | | |             HOST_ARCH = sun4
-                  | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
-                  | | |             VX_DIR = /vxworks
-                  | | |             More.
-                  | | +--- 2. CONFIG_COMMON
-                  | |               General info about base.
-                  | +----- 3. CONFIG.hkv2f
-                  |           ^     BUILD_TYPE = Vx
-                  |           |     ARCH_CLASS = 68k 
-                  |           |     Arch Specific Compiler Flag Setup
-                  |           +---  a. CONFIG.Vx.68k
-                  |                         Compiler/utility setup for ARCH_CLASS
-                  +------- 4. CONFIG_SITE.hkv2f
-                                    Site Specific setup 
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                  ^^^^^^^
+                  ||||||+- 1. CONFIG_COMMON
+                  ||||||          General info about base.
+                  |||||+-- 2. CONFIG_BASE_VERSION
+                  |||||           Base version.
+                  ||||+--- 3. CONFIG_SITE
+                  ||||             HOST_ARCH = sun4
+                  ||||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                  ||||             VX_DIR = /vxworks
+                  ||||             More.
+                  |||+---- 4. CONFIG_HOST_ARCH.sun4
+                  |||              WIND_HOST_TYPE =  sun4-sunos4
+                  ||+----- 5. CONFIG.Vx
+                  ||               Definitions for Vx builds 
+                  |+------ 6. CONFIG.Vx.hkv2f
+                  |                ARCH_CLASS = 68k 
+                  |                Arch Specific Compiler Flag Setup
+                  |                Vx GNU cross compiler suffix
+                  +------- 7. CONFIG_SITE.Vx.hkv2f
+                                   Site Specific setup 
 
 ----------------------------  sun4  example --------------------------------
             (files are numbered in the order of their inclusion)
 
  src/db/Makefile.Unix   (An example EPICS makefile)
     ^   ^
-    |   +--- 3.  RULES.Unix
+    |   +--- 2.  RULES.Vx
     |              Default rules.
-    +------- 2.  CONFIG
-                  ^ ^ ^ ^
-                  | | | |
-                  | | | +- 1. CONFIG_SITE
-                  | | |             HOST_ARCH = sun4
-                  | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
-                  | | |             VX_DIR = /vxworks
-                  | | |             More.
-                  | | +--- 2. CONFIG_COMMON
-                  | |               General info about base.
-                  | +----- 3. CONFIG.sun4
-                  |                 BUILD_TYPE = Unix
-                  |                 ARCH_CLASS = sun4 
-                  |                 Arch Specific Compiler Flag Setup
-                  +------- 4. CONFIG_SITE.sun4
-                                    Directory locations
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                   ^^^^^
+                   |||||+- 1. CONFIG_COMMON
+                   |||||          General info about base.
+                   ||||+-- 2. CONFIG_BASE_VERSION
+                   ||||           Base version.
+                   |||+--- 3. CONFIG_SITE
+                   |||             HOST_ARCH = sun4
+                   |||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                   |||             VX_DIR = /vxworks
+                   |||             More.
+                   ||+---- 4. CONFIG_HOST_ARCH.sun4
+                   ||              WIND_HOST_TYPE =  sun4-sunos4
+                   |+----- 5. CONFIG.Host.sun4
+                   |               ARCH_CLASS = sun4 
+                   |               Arch Specific Compiler Flag Setup
+                   |               Vx GNU cross compiler suffix
+                   +------ 6. CONFIG_SITE.Host.sun4
+                                   Site Specific setup 
 
-----------------------------------------------------------------------------
-   Part 4  ---  EPICS makefile rules
-----------------------------------------------------------------------------
-
- Rules supported by lower level Makefiles:
-
-    depends		- Generate include dependencies
-    build		- Builds objects, using libraries from "build_libs"
-    install		- Installs executables in bin/ARCH
-    clean		- Cleans objects
 

README.Perl

@@ -7,7 +7,7 @@ most important:
 tools/installEpics.pl
 include/makeEpicsVersion.pl
 libCom/bldEnvData.pl
-libCom/makeStatSymTbl.pl
+libCom/makeStatTbl.pl
 sequencer/makeVersion.pl
 
 WIN32 also uses

README.WIN32

@@ -1,10 +1,12 @@
-Compiling EPICS on WIN32 (Windows95/NT)
----------------------------------------
+
+Compiling EPICS and Building IOC Applications on WIN32 (Windows95/NT) 
+---------------------------------------------------------------------
 
 Original port of EPICS base to WIN32 (Windows95/NT)
 was done by Kay-Uwe Kasemir 11/96
 
-questions & comments please mail to johill@lanl.gov
+please mail questions, comments, corrections, additional examples, etc 
+	to johill@lanl.gov
 
 0) what you will get
 --------------------
@@ -14,37 +16,50 @@ Right now this port of EPICS to WIN32 should allow you to
 * compile almost all of EPICS base using {Tornado, MS Visual C, perl,
   GNU make} (only {MS Visual C, perl, GNU make} if you prefer
   to compile only the host portions of EPICS base).
-* load EPICS on a PC IOC (486, pentium),
-  load simple databases
+* load EPICS on an IOC (486, pentium, 68k, ...),
+  load databases
   (no drivers/devices for real I/O available, yet.
    Some Greenspring IP support [Relay, Dig, ADC, DAC] is in progress)
 * build and use ca.dll on NT or Win95 to access all IOCs,
-  as well as the Com-library as a DLL.
-  The remaining libraries are statically linked and
-  therefore only accessible from programming languages like C,
-  not general WIN32 apps.
+  as well as the Com-library, gdd-library, cas-library,
+  and all other EPICS base libraries as DLLs.
 * build gdd, cas and a demo of the new portable CA server on WIN32.
-* missing: the sequencer, makeExampleApp etc.  and long term tests
 
 1) see what you have
 --------------------
 
-To compiler EPICS on WIN32, we need
+To compile EPICS on WIN32, we need
 
-	WindRiver Systems Tornado (used: 1.0)
-	Microsoft Visual C        (used: 4.0)
+	WindRiver System's Tornado (used: 1.0)  (not required if host only build)
+	Microsoft's Visual C/C++   (used: 4.0)  (borland C++ rumored to work also)
 
 and some tools:
 
-	gnu make
-	perl
+	gnu make - www.gnu.org (we used 3.76)
+	perl - www.perl.org (we used 5.003)
 
 The perl interpreter and gnu make are available 'on the net'
 as sources which compile with MS Visual C++.
 If you cannot/don't want to find them, contact me, please!
 
 2) set environment variables
-----------------------------
+
+(Setting env. vars. is different: for NT, use Settings/System,
+for Win95 use autoexec.bat)
+
+When setting paths in the EPICS CONFIG files for WIN32:
+
+	** Note that that each "\" in any path variables
+		must be replaced with a "\\" (this is because GNU make treats
+		all "\" characters as line continuation)
+
+	** Note that that each space in any file name or 
+        path name variable must be replaced with 
+        a "\ " (this is because GNU make treats all " " separated
+        input as independent tokens in the input stream.
+
+	** WIN32 will generally allow "/" and "\" interchangeably in file paths,
+		but the DOS shell appears to only accept "\".
 
 Your path should include:
 - The EPICS-binaries that we are about to build in <EPICS>base/bin/WIN32
@@ -59,15 +74,15 @@ C:\WINNT35.0;
 c:\msdev\bin;
 c:\perl5\bin;
 c:\make-3.75\WinRel;
-c:\epics\base\bin\win32 
+c:\epics\base\bin\win32 (really where INSTALL_LOCATION specifies)
 
-On NT, "Path" is defined by the operatin system, on Win95, it's "PATH" instead.
+On NT, "Path" is defined by the operating system, on Win95, it's "PATH" instead.
 
 MS Visual C and Tornado should be installed properly with
 these env. variables set:
 
-WIND_BASE=c:\Tornado
-WIND_HOST_TYPE=x86-win32
+WIND_BASE=c:\Tornado		(required for cross development only)
+WIND_HOST_TYPE=x86-win32	(required for cross development only)
 
 This way the EPICS makesystem can locate Tornado 
 without any changes to the files in base/config.
@@ -79,23 +94,26 @@ MSDevDir=C:\MSDEV
 include=c:\msdev\include;c:\msdev\mfc\include
 lib=c:\msdev\lib;c:\msdev\mfc\lib
 
-(Setting env. vars. is different: for NT, use Settings/System,
-for Win95 use autoexec.bat)
+Select host arch to build:
+HOST_ARCH=WIN32			(used by the make system)
 
-For EPICS, set:
+Set the "TMP" environment variable if you need to specify where 
+temporary files are created.
 
-#	select host arch to build:
-HOST_ARCH=WIN32
-HOME=???  # if you use $(HOME)/EPICS_CONFIG
+Directory Used For Temporary Files   Conditions
+----------------------------------   ----------
+Directory specified by TMP           TMP environment variable is set, 
+                                     and directory specified by TMP exists.	
+dir argument to _tempnam             TMP environment variable is not set, or 
+                                     directory specified by TMP does not exist.	
+P_tmpdir in STDIO.H                  dir argument is NULL, or dir is name of 
+                                     nonexistent directory.	
+Current working directory            P_tmpdir does not exist.	
 
-EPICS_CA_ADDR_LIST              128.165.32.255	(addr of WIN32 host)
-EPICS_CA_AUTO_CA_ADDR_LIST	NO
-EPICS_CA_CONN_TMO		30.0
-EPICS_CA_BEACON_PERIOD		15.0
-EPICS_CA_REPEATER_PORT		5065
-EPICS_CA_SERVER_PORT		5064
-EPICS_TS_MIN_WEST		420		(Germany: -120)
+On my system I see in stdio.h that _P_tmpdir is "/". Here is a common
+setting for "TMP" (the C:\TEMP directory must exist).
 
+TMP=C:\TEMP
 
 3) building EPICS
 -----------------
@@ -103,23 +121,61 @@ EPICS_TS_MIN_WEST		420		(Germany: -120)
 Prepare apx. 2 ltr. Tee and type:
 
 	cd <epics>/base
-	make 
+	make 			(use gnu make)
 
 Watch for errors and send them to me.
 
-There might be loads of compiler warnings.
-Known errors:
+Known problems:
 * gnumake seems to be faster than WIN32 sometimes
   which results in warnings/errors like
   "file has modification date in the future"
-  for newly vreated things.
+  for newly created things.
   Very seldom this is fatal, so you have to
   stop gnumake and restart it.
-* This is strange because Windows95/NT don't care
+* This is strange because Windows95/NT doesn't care
   about upper/lower case:
   WIN32 is WIN32, not win32. Gnumake fails
   if e.g. base/src/include/os/WIN32 is ...win32.
 
+4) Creating EPICS IOC applications under WIN32
+
+o create application development folder
+	
+o start a DOS window and change your working directory to the folder
+	created above (with the DOS "cd" command)
+
+o to create an example application type:
+	"perl c:\epics\bin\win32\makeBaseApp.pl -b c:\\epics -e
+
+	** Note that that each "\" above in any path arguments to makeBaseApp.pl
+		must be replaced with a "\\" (this is because GNU make treats
+		all "\" characters as line continuation)
+
+	** Note that that each space in any file name or 
+        path name argument to makeBaseApp.pl must be replaced with 
+        a "\ " (this is because GNU make treats all " " separated
+        input as independent tokens in the input stream.
+
+	** Note that c:\epics above must be replaced by the path
+		to your epics source installation (or where INSTALL_LOCATION 
+		specifies)
+
+o General information on EPICS IOC application development can be found in
+	the "EPICS IOC Application Developers Guide". To see all of the options 
+	supported by makeBaseApp.pl type "perl c:\epics\bin\win32\makeBaseApp.pl"
+
+5) EPICS GNU make makefiles can be executed from within a Visual C++ "makefile"
+style project. This allows EPICS programs to be developed directly inside of
+the visual C++ environment. To do this create a "makefile" project and place your 
+gnu make command in the build configuration (accessed from the project/settings menu). 
+You will also need to add GNU make and <EPICS>/bin/win32 into the Visual C++ 
+executable search path (from the tools/options menu). I have not so far determined 
+how to configure visual C++ so that it is possible to double click on the compiler 
+error messages generated within an EPICS "makefile" style project and have visual 
+C++ immediately position the cursor on the corresponding line in the source (as is 
+normally the case in the visual C++ environment). If you solve this problem please 
+forward the details to johill@lanl.gov.
+
 Good luck !
 
 -Kay

README.cxxTemplates

@@ -1,18 +1,22 @@
 
-The templates supplied with EPICS base are in $(EPICS)/base/src/cxxTemplates
+The C++ templates supplied with EPICS base are in 
+"$(EPICS)/base/src/cxxTemplates".
 
 In Stroustrups's "The C++ Programming Language" Appendix A: r.14.9
 (ANSI/ISO resolutions) a mechanism is described for the explicit 
 instantiation of template member functions (that are not inline). 
 At this time some compilers do not support this mechanism (and use
-a template database or smart linker instead). Other compilers 
+a template database snd/or smart linker instead). Other compilers 
 (such as g++) provide only limited support for other forms of
-instantiation.
+instantiation (g++ does not yet provide a template database or 
+a smart linker for templates).
 
 Since there is no defacto standard mechanism for instatiating
 templates at this time we are defining the preprocessor flag 
 EXPL_TEMPL in the build system when the compiler supports
-explicit instantiation. 
+explicit instantiation and the compiler does not support
+automatic instantiation via a smart linker and/or template
+database (currently this is only g++).
 
 EPICS codes that use templates may need to include a code block
 as follow that instantiates the template only once into each
@@ -20,7 +24,6 @@ program.
 
 #include <classXYZ.h>
 #include <templXXX.h>
-#include <templXXX.cc>
 
 //
 // if the compiler supports explicit instantiation of

README.cygwin32

@@ -0,0 +1,54 @@
+Compiling EPICS on cygwin32 (Windows95/NT)
+------------------------------------------
+
+Right now this port of EPICS base to cygwin32 R1.3.3 fails
+because cygwin does not yet support point-to-point interfaces.
+ 
+To build EPICS on Win95 or NT using cygwin32, we need
+
+        EPICS base distribution, R3.12.0.beta12 or later, available
+           from http://aps.anl.gov/...
+        The latest cygwin distribution, available from 
+           http://www.cygwin.com
+
+BUILD INSTRUCTIONS
+------------------
+
+
+1) Install the cygwin binary release
+------------------------------------
+
+2) Install the epics base distribution
+--------------------------------------
+        cp <dirname>\<basereleasename>.tar.gz .
+        gunzip -d <basereleasename>.tar.gz
+        tar xvf <basereleasename>.tar
+        chmod +w -R *
+        cd <epicsBaseDir>
+
+3) Set environment variables and path using cygwin32.bat
+-------------------------------------------------------------
+        <edit <epicsBaseDir>/startup/cygwin32.bat changing paths if necessary>
+        cd <epicsBaseDir>\startup
+        edit cygwin32.bat
+        <execute cygwin32.bat>
+         cygwin
+
+4) Set site specific parms in epics config files
+------------------------------------------------
+	cd <epicsBaseDir>\config
+	<edit CONFIG_SITE* files>
+
+5) Build epics base
+-------------------
+        cd <epicsBaseDir>
+        make
+
+6) Create an example EPICS application (<epicsBaseDir> needs drive letter)
+--------------------------------------------------------------------------
+        mkdir <epicsappdir>
+        cd <epicsappdir>
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -l
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -t example example
+        make
+

SkeletonCOPYRIGHT_Combined

@@ -1,11 +0,0 @@
-/*****************************************************************
-                          COPYRIGHT NOTIFICATION
-*****************************************************************
-
-(C)  COPYRIGHT 1991 Regents of the University of California,
-and the University of Chicago Board of Governors.
-
-This software was developed under a United States Government license
-described on the COPYRIGHT_Combined file included as part
-of this distribution.
-**********************************************************************/

config.hkv2f.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mk

@@ -1 +0,0 @@
-BUILD_ARCHS=sun4 mv167 mv147

config.mv147.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mv167.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.sun4.mk

@@ -1,13 +0,0 @@
-BUILD_TYPE = Unix
-DIRS =	src/libCom \
-	src/db \
-	src/ca \
-	src/toolsComm/antelope \
-	src/toolsComm/flex \
-	src/as \
-	src/bld \
-	src/dct \
-	src/util \
-	src/sequencer \
-	src/dbtools \
-	rec

config/CONFIG

@@ -1,31 +1,70 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
 #  The developer may edit this file.
+# assume T_A is the host arch if not specified
 
+#
 #  EPICS base definitions
 #
 include $(EPICS_BASE)/config/CONFIG_COMMON
  
+#
+#  EPICS version definitions
+#
+include $(EPICS_BASE)/config/CONFIG_BASE_VERSION
+ 
 #  Site-specific build options
 #
 include $(EPICS_BASE)/config/CONFIG_SITE
- 
-# assume T_A is the host arch if not specified
-ifndef T_A
-T_A = $(HOST_ARCH)
-endif
 
+#  Host architecture specific definitions
+#
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.$(HOST_ARCH)
+#
+-include $(EPICS_BASE)/config/CONFIG_SITE_HOST_ARCH.$(HOST_ARCH)
+ 
+ifdef T_A
+
+#  Build type specific definitions
+#
+-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE)
+#
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE)
+ 
 #  Architecture specific definitions
 #
-include $(EPICS_BASE)/config/CONFIG.$(T_A)
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(T_A)
 #
--include $(EPICS_BASE)/config/CONFIG_SITE.$(T_A)
+ifneq ($(HOST_ARCH),$(T_A))
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(HOST_ARCH)
+endif
+#
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(T_A)
  
+endif
+
 #  User specific definitions
 #
 -include $(HOME)/EPICS_CONFIG
 -include $(HOME)/EPICS_CONFIG.$(HOST_ARCH)
+-include $(HOME)/EPICS_CONFIG_HOST_ARCH.$(HOST_ARCH)
+ifdef T_A
+-include $(HOME)/EPICS_CONFIG.$(BUILD_TYPE)
+ifneq ($(HOST_ARCH),$(T_A))
+-include $(HOME)/EPICS_CONFIG.$(BUILD_TYPE).$(HOST_ARCH)
+endif
+-include $(HOME)/EPICS_CONFIG.$(BUILD_TYPE).$(T_A)
+endif
 
 #  All EPICS options other than BUILD_TYPE
 #   may be overridden here.
@@ -35,7 +74,7 @@ include $(EPICS_BASE)/config/CONFIG.$(T_A)
 #  Build client objects statically ?  must be either YES or NO
 #STATIC_BUILD=NO
 #  Unix Optimization,   must be either YES or NO
-#UNIX_OPT=YES
+#HOST_OPT=YES
 #  VxWorks Optimization,  must be either YES or NO
 #VX_OPT=YES
 #  Generate Verbose Compiler Warnings for Unix,  must be either YES or NO
@@ -43,4 +82,10 @@ include $(EPICS_BASE)/config/CONFIG.$(T_A)
 #  Generate Verbose Compiler Warnings for VxWorks,  must be either YES or NO
 #VX_WARN=YES
 #etc.
-#
+
+#CROSS_COMPILER_TARGET_ARCHS=mv167
+#ANSI=GCC
+#CPLUSPLUS=G++
+#CMPLR=STRICT
+#CXXCMPLR=STRICT
+

config/CONFIG.Host.Borland

@@ -0,0 +1,261 @@
+# CONFIG.Host.Borland
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Borland
+ 
+BORLAND_LIB = $(BORLAND)\\lib
+BORLAND_INC = $(BORLAND)\\include
+BORLAND_BIN = $(BORLAND)\\bin
+
+#
+#
+ANSI = ACC
+CPLUSPLUS = CCC
+
+#
+# -q supress command line banner
+WINLINK = $(BORLAND_BIN)/ilink32 -q
+
+# -l specifies default language
+# -fo Renames the output .RES file
+RCCMD = $(BORLAND_BIN)/brcc32 $(subst -I,-i,$(INCLUDES)) -l0x409  -fo$@ $<
+
+ARCMD = $(BORLAND_BIN)/tlib $@
+
+#
+# Configure Borland C compiler
+# -q suppress compiler identification banner
+# -tWM generate a 32-bit multi-threaded target
+# -tWD generate a .DLL executable
+# -a8 quad word alignment
+# -D_WIN32 macro defined to be consistant with Microsoft Visual C++
+# -D_RTLDLL macro defined to use Borland C++ RTL library
+CCLINKOPT = -q -tWM -tWD -a8 -D_WIN32 -D_RTLDLL
+ACC = $(BORLAND_BIN)/bcc32 $(CCLINKOPT)
+
+#
+# __STDC__=0 works but not as cleanly as with
+# Microsoft Visual C++.
+# The Borland header files use ifdef __STDC__ 
+# to disable many nice things. This is overridden
+# by defining NO_BORLAND_STDC in the Makefile.Host.
+#
+ifdef NO_BORLAND_STDC
+ACC_ANSI = $(ACC)
+ACC_STRICT = $(ACC)
+else
+ACC_ANSI = $(ACC) -D__STDC__=0
+ACC_STRICT = $(ACC) -D__STDC__=0
+endif
+ACC_TRAD = $(ACC)
+
+# -w display warnings on
+# -g0 no limit to warning messages
+# some warning message here are always disabled because they are 
+# trivial and numerous 
+# -w-8012 Comparing signed and unsigned values
+# -w-8060 Possibly incorrect assignment
+# -w-8071 Conversion may lose significant digits
+ACC_WARN_YES = -w -g0 -w-8012 -w-8060 -w-8071
+# -w- display warnings off
+ACC_WARN_NO =  -w-
+
+#
+# -k- turn off standard stack frame
+# -H- turn off precompiled headers
+# -R- don't include browser info in .obj files
+# -O1 optimization for size
+# -v- turn off source debugging
+# -vi control expansion of inline functions
+ACC_OPT_YES = -k- -H- -R- -O1 -v- -vi
+
+#
+ACC_OPT_NO = 
+
+
+#
+# no special libs for static link
+#
+ACC_SLIBS_YES= 
+ACC_SLIBS_NO=
+
+# Configure OS vendor C++ compiler
+#
+# __STDC__=0 works but not as cleanly as with
+# Microsoft Visual C++.
+# The Borland header files use ifdef __STDC__ 
+# to disable many nice things. This is overridden
+# by defining NO_BORLAND_STDC in the Makefile.Host.
+#
+CCC = $(BORLAND_BIN)/bcc32 $(CCLINKOPT)
+ifdef NO_BORLAND_STDC
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+else
+CCC_NORMAL = $(CCC) -D__STDC__=0
+CCC_STRICT = $(CCC) -D__STDC__=0
+endif
+CCC_TEMPL_INST_FLAG =
+
+# -w display warnings on
+# -g0 no limit to warning messages
+# -w-8012 Comparing signed and unsigned values
+# -w-8060 Possibly incorrect assignment
+# -w-8071 Conversion may lose significant digits
+CCC_WARN_YES = -w -g0 -w-8012 -w-8060 -w-8071 -w-8008 -w-8027 -w-8066 -w-8080 -w-8004
+# -w- display warnings off
+CCC_WARN_NO = -w-
+
+#
+# -k- turn off standard stack frame
+# -H- Turn off precompiled headers
+# -R- Don't include browser info in .obj files
+# -O1 optimization for size
+# -v- turn off source debugging
+# -vi control expansion of inline functions
+CCC_OPT_YES = -k- -H- -R- -O1 -v- -vi
+
+#
+CCC_OPT_NO = 
+
+#
+# no special libs for static link
+#
+CCC_SLIBS_YES=
+CCC_SLIBS_NO=
+
+PROD_VERSION=3.13
+# -c case sensitive linking
+# -C clear state before linking
+# -Gi generate import library
+# -Gn no state files
+# -Tpd targets a Windows .DLL file
+# -x no map
+# -w display warnings on
+LINK_OPT_FLAGS_YES = -c -C -Gi -Gn -Tpd -x -w
+LINK_OPT_FLAGS_NO = -c -C -Gi -Gn -Tpd -x -w-
+WIN32_DLLFLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
+OPT_LDFLAGS = 
+
+ARCH_DEP_CFLAGS=
+
+#	to identify the general architecture class:
+#	should be BSD, SYSV, WIN32, ...
+#	is: WIN32, sun4, hpux, linux, ...
+#
+ARCH_CLASS=WIN32
+
+#	ifdef WIN32   looks better that  ifeq ($(ARCH_CLASS),WIN32)  ??
+WIN32=1
+BORLANDC=1
+
+EXE=.exe
+OBJ=.obj
+RES=.res
+
+#       Problem: BorlandC does not recognize  *.cc as C++ source,
+#       we have to compile xx.cc  using the flag -P xx.cc,
+SOURCE_CXXFLAG = -P -D__cplusplus
+
+#	Operating system flags 
+OP_SYS_CFLAGS =
+
+#
+# Borland specific include files
+#
+OP_SYS_INCLUDES = -I$(BORLAND_INC)
+#
+OP_SYS_LDLIBS =
+
+#
+# specify dll .def file only if it exists
+#
+#DLL_DEF_FLAG = $(addprefix /def:,$(wildcard ../$(LIBRARY).def))
+DLL_DEF_FLAG = $(subst /,\\,$(wildcard ../$(LIBRARY).def))
+
+#	HOST_OPT_FLAGS is part of CFLAGS/CXXFLAGS,
+#	which in turn are used in COMPILE.c[c]
+#
+#	If we compile a .c, .cc into an $(OBJ),
+#	we test if this object is part of the 
+#	library objects LIBOBJS.
+#	If so, we define _WINDLL so that
+#	e.g. include/shareLib.h works correctly.
+#
+HOST_OPT_FLAGS += $(subst $@, /_WINDLL, $(findstring $@,$(LIBOBJS)))
+
+#
+#	A WIN32 dll has three parts:
+#	x.dll: the real dll (SHRLIBNAME)
+#	x.lib: what you link to progs that use the dll (LIBNAME)
+#	x.exp: what you need to build the dll (in no variable)
+#
+LINK.shrlib = $(WINLINK) $(WIN32_DLLFLAGS) -L$(BORLAND_LIB) -L$(BORLAND_LIB)\\Psdk c0d32.obj
+
+#	adjust names of libraries to build
+#
+#	But: if there are no objects LIBOBJS to include
+#	in this library (may be for e.g. base/src/libCompat
+#	on some archs), don't define (and build) any library!
+SHRLIBNAME = $(LIBRARY).dll
+
+#
+# Under WIN32 we have the unique situation where the DLL link creates the
+# DLL link library xxx.lib and we need to be very careful to avoid replacing
+# the xxx.lib created by the dll link with an xxx.lib created by $(AR).
+# Therefore, the object library is named xxxObj.lib
+#
+# SHARED_LIBRARIES is YES if we are building a DLL and NO if we aren't
+#
+DLL_LINK_LIBNAME_YES = $(LIBRARY).lib
+DLL_LINK_LIBNAME = $(DLL_LINK_LIBNAME_$(SHARED_LIBRARIES))
+
+#ifeq ($(strip $(SHARED_LIBRARIES)),NO)
+#LIBNAME = $(LIBRARY).lib
+#else
+LIBNAME = $(LIBRARY)Obj.lib
+#endif
+
+#	dll install location
+INSTALL_SHRLIB = $(INSTALL_BIN)
+
+#--------------------------------------------------
+# Dependancy definitions
+OBJECT_LIB_EXT_YES = Obj.lib # object library extension for static build
+OBJECT_LIB_EXT_NO = .lib # object library extension for dynamic build
+OBJECT_LIB_EXT = $(OBJECT_LIB_EXT_$(STATIC_BUILD))
+
+COND_PROD_DEPLIBS = $(foreach prod,$(PROD), $(foreach lib, $($(basename $(prod))_LIBS),\
+ $(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT)))
+PRODNAME_DEPLIBS = $(foreach lib,$(PRODNAME_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(lib).lib $($(lib)_DIR)/$(lib)Obj.lib $(EPICS_BASE_LIB)/$(lib).lib $(EPICS_BASE_LIB)/$(lib)Obj.lib ) $(filter $(LIBRARY)$(OBJECT_LIB_EXT), $(lib)$(OBJECT_LIB_EXT)) ))
+PROD_DEPLIBS = $(foreach lib,$(PROD_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(lib).lib $($(lib)_DIR)/$(lib)Obj.lib $(EPICS_BASE_LIB)/$(lib).lib $(EPICS_BASE_LIB)/$(lib)Obj.lib ) $(filter $(LIBRARY)$(OBJECT_LIB_EXT), $(lib)$(OBJECT_LIB_EXT)) )) 
+
+USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(lib).lib $($(lib)_DIR)/$(lib)Obj.lib $(EPICS_BASE_LIB)/$(lib).lib $(EPICS_BASE_LIB)/$(lib)Obj.lib ) $(filter $(LIBRARY)$(OBJECT_LIB_EXT), $(lib)$(OBJECT_LIB_EXT)) )) 
+
+# by default the libraries used when linking the DLL are just
+# PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
+ 
+#
+#	EPICS libs that we need to link the DLL with
+#	(it isnt necessary to rebuild the dll if these change)
+DLL_DEPLIBS = $(foreach lib,$(DLL_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(lib).lib $($(lib)_DIR)/$(lib)Obj.lib $(EPICS_BASE_LIB)/$(lib).lib $(EPICS_BASE_LIB)/$(lib)Obj.lib) $(filter $(LIBRARY)$(OBJECT_LIB_EXT), $(lib)$(OBJECT_LIB_EXT)) ))
+
+USR_LDLIBS = $(PRODNAME_DEPLIBS) $(PROD_DEPLIBS) $(USR_DEPLIBS) $(SYS_PROD_LIBS:%=%.lib)
+
+DLL_LDLIBS = $(DLL_DEPLIBS) $(SYS_PROD_LIBS:%=%.lib) $(OP_SYS_LDLIBS)
+
+#multithreaded import library
+LIBSUF=mti
+# -c case sensitive linking
+# -C clear state before linking
+# -Gn no state files
+# -Tpe targets a Windows .EXE file
+# -x no map
+# -w display warnings on
+LDFLAGS += -c -C -Gn -Tpe -x -w -L$(BORLAND_LIB) -L$(BORLAND_LIB)\\Psdk
+LINKSTARTUP = c0x32.obj
+LINKLIBS=import32.lib cw32$(LIBSUF).lib
+
+LINK.c = $(WINLINK) $(LDFLAGS) $(LINKSTARTUP)
+LINK.cc = $(WINLINK) $(LDFLAGS) $(LINKSTARTUP)
+

config/CONFIG.Host.Linux

@@ -0,0 +1,78 @@
+# CONFIG.Host.Linux
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.Linux
+ 
+ARCH_CLASS = Linux
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar -rc
+ARCMD = $(AR) $@
+RANLIB = ranlib -t
+
+#OP_SYS_FLAGS = -D_BSD_SOURCE -D_POSIX_SOURCE
+
+# Configure OS vendor C compiler
+ACC = gcc
+ACC_ANSI = $(ACC)
+#ACC_ANSI = $(ACC) -ansi -D_SVID_SOURCE
+#ACC_STRICT = $(ACC) -Xc
+ACC_STRICT = $(ACC) -pedantic
+#ACC_STRICT = $(ACC)  -ansi -pedantic -D_SVID_SOURCE
+ACC_TRAD = $(ACC)
+ACC_WARN_YES =  -Wall
+ACC_WARN_NO =  -w
+ACC_OPT_YES =  -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES = -static
+ACC_SFLAGS_NO=
+ACC_SLIBS_YES =
+ACC_SLIBS_NO=
+ACC_SHRLIB_CFLAGS_YES =  -fPIC
+ACC_SHRLIB_LDFLAGS_YES =  -shared -Wl,-soname,$@ 
+
+
+# Configure OS vendor C++ compiler
+CCC = g++
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+#CCC_TEMPL_INST_FLAG = -DEXPL_TEMPL
+CCC_WARN_YES =  -Wall
+CCC_WARN_NO =
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES = -static
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES =
+CCC_SLIBS_NO=
+CCC_DEPENDS_FLAG = -MM
+CCC_SHRLIB_CFLAGS_YES =  -fPIC
+CCC_SHRLIB_LDFLAGS_YES =  -shared -Wl,-soname,$@ 
+
+# added smh 6/5/98 : when building fdmgr - seems to use this not ACC
+# in effect this overides orig def in CONFIG_COMMON :
+# which is GCC_STRICT = $(GCC) -ansi -pedantic
+GCC_STRICT = $(GCC) 
+G++_STRICT = $(G++)  -Wtraditional
+
+
+#ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -D_USE_BSD
+ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
+ARCH_DEP_LDFLAGS =
+
+#glibc FAQ
+#	"_GNU_SOURCE:  glibc does not make the GNU extensions available 
+#	automatically.  If a program depends on the GNU extensions or some other
+#	non-standard functionality, it is necessary to compile it with the C 
+#	compiler option -D_GNU_SOURCE, or better to put #define _GNU_SOURCE at
+#	the beginning of your source files, before any C library header files 
+#	are included.  This difference normally manifests itself in the form
+#	of missing prototypes and/or data type definitions.  Thus, if you get
+#	such errors, the first thing you should do is try defining _GNU_SOURCE
+#	and see if that makes the problem go away."
+#ARCH_DEP_CFLAGS += -D_GNU_SOURCE
+
+
+

config/CONFIG.Host.UnixCommon

@@ -0,0 +1,77 @@
+
+#
+#  Contains definitions common to all Unix archs
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.UnixCommon
+ 
+
+#-------------------------------------------------------
+#	adjust names of libraries to build
+#
+# <lib> ->  lib<lib>.a
+LIBNAME = $(LIBRARY:%=lib%.a)
+
+#-------------------------------------------------------
+# Shared library definitions
+
+# CONFIG.Host.<arch> files may override
+SHRLIB_SUFFIX = .so
+
+SHRLIBNAME = lib$(LIBRARY)$(SHRLIB_SUFFIX)$(SHRLIB_VERSION:%=.%)
+
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS) $(USR_LIBS))
+DLL_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(DLL_LIBS:%=-l%)
+
+INSTALL_SHRLIB = $(INSTALL_LIB)
+
+LINK.shrlib= $(SHRLIB_LINKER) -o $@ $(CFLAGS) $(CPPFLAGS) $(SHRLIB_LDFLAGS) $(LDFLAGS)
+
+#-------------------------------------------------------
+# Unix command definitions
+
+CPP = cpp
+RANLIB = ranlib
+
+# GNU compilers
+GCC = gcc
+G++ = g++
+
+#-------------------------------------------------------
+# Unix suffix definitions
+EXE =
+OBJ = .o
+
+#--------------------------------------------------
+# Dependancy definitions
+COND_PROD_DEPLIBS = $(foreach prod,$(PROD), $(foreach lib, $($(basename $(prod))_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*))))
+PRODNAME_DEPLIBS = $(foreach lib,$(PRODNAME_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
+PROD_DEPLIBS = $(foreach lib,$(PROD_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
+USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
+
+#--------------------------------------------------
+# Determine ld flags
+USR_DIRS = $(dir $(PRODNAME_DEPLIBS)) $(dir $(PROD_DEPLIBS))\
+ $(dir $(USR_DEPLIBS))
+USR_LDFLAGS += $(sort $(USR_DIRS:%=-L%))
+
+# Determine ld libs
+USR_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(PROD_LIBS:%=-l%) $(USR_LIBS:%=-l%)\
+ $(SYS_PROD_LIBS:%=-l%)
+
+#--------------------------------------------------
+# Operating system definitions
+OP_SYS_INCLUDES =
+OP_SYS_CFLAGS = -DUNIX
+
+OP_SYS_LDFLAGS =
+OP_SYS_LDLIBS = -lm
+
+#--------------------------------------------------
+# Link definitions
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+ 
+#--------------------------------------------------
+# Allow site overrides
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.UnixCommon

config/CONFIG.Host.WIN32

@@ -0,0 +1,255 @@
+# CONFIG.Host.WIN32
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.WIN32
+ 
+#
+# You currently get Visual C++ even if you ask for GNU.
+#
+# !! borlund support needed here !!
+#
+ANSI = ACC
+CPLUSPLUS = CCC
+
+#
+# "\ " forces gnu make to keep this as one token
+#
+MSVISC = c:\\Program\ Files\\DevStudio\\Vc
+WINLINK = link
+
+RCCMD = rc -l 0x409 -i . -i .. -I$(INSTALL_INCLUDE)/os/$(OS_CLASS) -I$(INSTALL_INCLUDE) $(INSTALL_INCLUDES) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE) -fo $@ $<
+
+ARCMD = lib /nologo /verbose /out:$@
+
+#
+# Configure OS vendor C compiler
+ACC = cl 
+
+#
+# __STDC__=0 is a real great idea of Jeff that gives us both:
+# 1) define STDC for EPICS code (pretend ANSI conformance)
+# 2) set it to 0 to use MS C "extensions" (open for _open etc.)
+# because MS uses:   if __STDC__ ... disable many nice things
+#
+# Use of /Za would dissable DLL import/export keywords which
+# EPICS include/excludes using architecture neutral macros
+ACC_ANSI = $(ACC) /nologo /D__STDC__=0
+ACC_STRICT = $(ACC) /nologo /D__STDC__=0
+ACC_TRAD = $(ACC) /nologo
+
+#
+# /W<N> use warning level N
+# (maximum (lint type) warnings at level 4)
+ACC_WARN_YES = /W3
+ACC_WARN_NO =  /W1
+
+#
+# /Ox maximum optimizations
+# /MD use MSVCRT (run-time as DLL, multi-thread support)
+ACC_OPT_YES = /Ox
+
+#
+# /Zi include debugging info in object files
+# /Fr create source browser file
+ACC_OPT_NO = /Zi /Fr
+
+#
+# the following options are required when
+# vis c++ compiles the code (and includes
+# the header files)
+#
+# /MT static multithreaded C RTL
+# /MTd static multithreaded C RTL (debug version)
+# /MD multithreaded C RTL in DLL
+# /MDd multithreaded C RTL in DLL (debug version)
+VISC_EPICS_DLL_NO = -DEPICS_DLL_NO
+VISC_EPICS_DLL_YES = 
+VISC_EPICS_DLL = $(VISC_EPICS_DLL_$(SHARED_LIBRARIES))
+VISC_SFLAGS_DEBUG_NO = d
+VISC_SFLAGS_DEBUG_YES =
+VISC_SFLAGS_DEBUG = $(VISC_SFLAGS_DEBUG_$(HOST_OPT))
+ACC_SFLAGS_YES= /MT$(VISC_SFLAGS_DEBUG) $(VISC_EPICS_DLL)
+ACC_SFLAGS_NO= /MD$(VISC_SFLAGS_DEBUG) $(VISC_EPICS_DLL)
+
+#
+# no special libs for static link
+#
+ACC_SLIBS_YES= 
+ACC_SLIBS_NO=
+
+# Configure OS vendor C++ compiler
+#
+# __STDC__=0 is a real great idea of Jeff that gives us both:
+# 1) define STDC for EPICS code (pretend ANSI conformance)
+# 2) set it to 0 to use MS C "extensions" (open for _open etc.)
+# because MS uses:   if __STDC__ ... disable many nice things
+#
+# Use of /Za would dissable DLL import/export keywords which
+# EPICS include/excludes using architecture neutral macros
+CCC = cl 
+CCC_NORMAL = $(CCC) /nologo /D__STDC__=0
+CCC_STRICT = $(CCC) /nologo /D__STDC__=0
+CCC_TEMPL_INST_FLAG =
+
+#
+# /W<N> use warning level N
+# (maximum lint level warnings at level 4)
+CCC_WARN_YES = /W3
+CCC_WARN_NO =  /W1
+
+#
+# /Ox maximum optimizations
+CCC_OPT_YES = /Ox
+
+#
+# /Zi include debugging info in object files
+# /Fr create source browser file
+CCC_OPT_NO = /Zi /Fr
+
+#
+# the following options are required when
+# vis c++ compiles the code (and includes
+# the header files)
+#
+# /MT static multithreaded C RTL
+# /MTd static multithreaded C RTL (debug version)
+# /MD multithreaded C RTL in DLL
+# /MDd multithreaded C RTL in DLL (debug version)
+CCC_SFLAGS_YES= /MT$(VISC_SFLAGS_DEBUG) $(VISC_EPICS_DLL)
+CCC_SFLAGS_NO= /MD$(VISC_SFLAGS_DEBUG) $(VISC_EPICS_DLL)
+
+#
+# no special libs for static link
+#
+CCC_SLIBS_YES=
+CCC_SLIBS_NO=
+
+LINK_OPT_FLAGS_YES = /WARN:3 /incremental:no /opt:ref\
+/release $(PROD_VERSION:%=/version:%)
+LINK_OPT_FLAGS_NO = /WARN:3 /debug 
+OPT_LDFLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
+
+ARCH_DEP_CFLAGS=
+
+#	to identify the general architecture class:
+#	should be BSD, SYSV, WIN32, ...
+#	is: WIN32, sun4, hpux, linux, ...
+#
+ARCH_CLASS=WIN32
+
+#	ifdef WIN32   looks better that  ifeq ($(ARCH_CLASS),WIN32)  ??
+WIN32=1
+
+EXE=.exe
+OBJ=.obj
+RES=.res
+
+#       Problem: MS Visual C++ does not recognize  *.cc as C++ source,
+#       we have to compile xx.cc  using the flag -Tp xx.cc,
+#       i.e.  -Tp  has to be immediately before the source file name
+SOURCE_CXXFLAG = /Tp
+
+#	Operating system flags 
+OP_SYS_CFLAGS =
+
+#
+# WIN32 specific include files
+#
+#OP_SYS_INCLUDES = -I$(EPICS_BASE_INCLUDE)\\os\\WIN32
+
+#
+# These are now added to the individual makefiles that use them in order to
+# speed up the build
+#
+#OP_SYS_LDLIBS = user32.lib kernel32.lib advapi32.lib winmm.lib
+OP_SYS_LDLIBS = 
+
+#	Files and flags needed to link DLLs (used in RULES.Host)
+#
+#	Strange but seems to work without: WIN32_DLLFLAGS should contain
+#	an entry point:
+#		'-entry:_DllMainCRTStartup$(DLLENTRY)'
+DLLENTRY = @12
+
+WIN32_DLLFLAGS = /subsystem:windows /dll $(OPT_LDFLAGS)
+
+#
+# specify dll .def file only if it exists
+#
+DLL_DEF_FLAG = $(addprefix /def:,$(wildcard ../$(LIBRARY).def))
+
+#	HOST_OPT_FLAGS is part of CFLAGS/CXXFLAGS,
+#	which in turn are used in COMPILE.c[c]
+#
+#	If we compile a .c, .cc into an $(OBJ),
+#	we test if this object is part of the 
+#	library objects LIBOBJS.
+#	If so, we define _WINDLL so that
+#	e.g. include/shareLib.h works correctly.
+#
+HOST_OPT_FLAGS += $(subst $@, /_WINDLL, $(findstring $@,$(LIBOBJS)))
+
+#
+#	A WIN32 dll has three parts:
+#	x.dll: the real dll (SHRLIBNAME)
+#	x.lib: what you link to progs that use the dll (LIBNAME)
+#	x.exp: what you need to build the dll (in no variable)
+#
+LINK.shrlib = $(WINLINK) /nologo $(WIN32_DLLFLAGS) /implib:$(DLL_LINK_LIBNAME) /out:$(SHRLIBNAME) $(DLL_DEF_FLAG)
+
+#	adjust names of libraries to build
+#
+#	But: if there are no objects LIBOBJS to include
+#	in this library (may be for e.g. base/src/libCompat
+#	on some archs), don't define (and build) any library!
+SHRLIBNAME = $(LIBRARY).dll
+
+#
+# Under WIN32 we have the unique situation where the DLL link creates the
+# DLL link library xxx.lib and we need to be very careful to avoid replacing
+# the xxx.lib created by the dll link with an xxx.lib created by $(AR).
+# Therefore, the object library is named xxxObj.lib
+#
+# SHARED_LIBRARIES is YES if we are building a DLL and NO if we aren't
+#
+DLL_LINK_LIBNAME_YES = $(LIBRARY).lib
+DLL_LINK_LIBNAME = $(DLL_LINK_LIBNAME_$(SHARED_LIBRARIES))
+LIBNAME = $(LIBRARY)Obj.lib
+
+#	dll install location
+INSTALL_SHRLIB = $(INSTALL_BIN)
+
+#--------------------------------------------------
+# Dependancy definitions
+OBJECT_LIB_EXT_YES = Obj.lib # object library extension for static build
+OBJECT_LIB_EXT_NO = .lib # object library extension for dynamic build
+OBJECT_LIB_EXT = $(OBJECT_LIB_EXT_$(STATIC_BUILD))
+COND_PROD_DEPLIBS = $(foreach prod,$(PROD), $(foreach lib, $($(basename $(prod))_LIBS),\
+ $(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT)))
+PRODNAME_DEPLIBS = $(foreach lib,$(PRODNAME_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT))
+PROD_DEPLIBS = $(foreach lib,$(PROD_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT))
+
+USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib)$(OBJECT_LIB_EXT))
+
+# by default the libraries used when linking the DLL are just
+# PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
+ 
+#
+#	EPICS libs that we need to link the DLL with
+#	(it isnt necessary to rebuild the dll if these change)
+DLL_DEPLIBS = $(foreach lib,$(DLL_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_LIB))/$(lib).lib)
+
+USR_LDLIBS = $(PRODNAME_DEPLIBS) $(PROD_DEPLIBS) $(USR_DEPLIBS) $(SYS_PROD_LIBS:%=%.lib)
+
+DLL_LDLIBS = $(DLL_DEPLIBS) $(SYS_PROD_LIBS:%=%.lib) $(OP_SYS_LDLIBS)
+
+LINK.c = $(WINLINK) -nologo $(LDFLAGS) -out:$@
+LINK.cc = $(WINLINK) -nologo $(LDFLAGS) -out:$@
+
+#--------------------------------------------------
+# Determine ld flags
+#USR_DIRS = $(dir $(PRODNAME_DEPLIBS)) $(dir $(PROD_DEPLIBS))\
+# $(dir $(USR_DEPLIBS))
+#USR_LDFLAGS += $(sort $(USR_DIRS:%=-L%))
+

config/CONFIG.Host.alpha

@@ -0,0 +1,48 @@
+# CONFIG.Host.alpha
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.alpha
+
+ARCH_CLASS = alpha
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar
+
+# Configure OS vendor C compiler
+ACC = cc
+ACC_ANSI = $(ACC) -std
+ACC_STRICT = $(ACC) -std1
+ACC_TRAD = $(ACC) -std0
+ACC_WARN_YES = 
+ACC_WARN_NO =  -w
+ACC_OPT_YES =  -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES= -non_shared
+ACC_SFLAGS_NO= -call_shared
+ACC_SLIBS_YES =
+ACC_SLIBS_NO=
+ACC_SHRLIB_CFLAGS_YES =
+ACC_SHRLIB_LDFLAGS_YES = -shared
+
+# Configure OS vendor C++ compiler
+CCC = cxx
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+CCC_TEMPL_INST_FLAG = -DEXPL_TEMPL
+CCC_WARN_YES =
+CCC_WARN_NO =
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES=
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES =
+CCC_SLIBS_NO=
+CCC_SHRLIB_CFLAGS_YES =
+CCC_SHRLIB_LDFLAGS_YES = -shared
+CCC_DEPENDS_FLAG =
+
+ARCH_DEP_CFLAGS = -D_OSF_SOURCE
+ARCH_DEP_LDLIBS =
+

config/CONFIG.Host.cygwin32

@@ -0,0 +1,34 @@
+# CONFIG.Host.cygwin32
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.cygwin32
+
+ARCH_CLASS = cygwin32
+
+# cygwin32 is a unix-like arch
+# include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+EXE=.exe
+
+#==========================
+# These are overrides of ANSI and CPLUSPLUS values in CONFIG_SITE
+# since OS vendor compilers ACC and CCC are not defined here for cygwin32
+ANSI=GCC
+CPLUSPLUS=G++
+# Shared libraries not implemented yet
+SHARED_LIBRARIES=NO
+#==========================
+# Fix for cygwin32 beta17.1 includes
+#OP_SYS_INCLUDES += /usr/local/include/g++
+#==========================
+ 
+ARCH_DEP_CFLAGS = -DCYGWIN32 -U_WIN32
+ARCH_DEP_LDLIBS =
+OP_SYS_LDLIBS =
+
+# cygwin32 overrides to eliminate following warning message -
+# -fPIC ignored for target (all code is position independent)
+GCC_DEP_CFLAGS = -D_REENTRANT
+G++_DEP_CFLAGS = -D_REENTRANT
+

config/CONFIG.Host.hp700

@@ -0,0 +1,83 @@
+# CONFIG.Host.hp700
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.hp700
+
+ARCH_CLASS = hp700
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+SHRLIB_SUFFIX = .sl
+
+AR = ar
+
+# Configure OS vendor C compiler
+ACC = cc
+ACC_ANSI = $(ACC) -Aa
+ACC_STRICT = $(ACC) -Aa
+ACC_TRAD = $(ACC)
+ACC_WARN_YES = 
+ACC_WARN_NO =  -w
+ACC_OPT_YES =  -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES= -Wl,-a,archive
+ACC_SFLAGS_NO=
+ACC_SLIBS_YES =
+ACC_SLIBS_NO=
+ACC_SHRLIB_CFLAGS_YES = +Z
+ACC_SHRLIB_LDFLAGS_YES = -b
+ACC_DEP_CFLAGS=+DAportable
+
+# Configure OS vendor C++ compiler
+HPCC = cc 
+HPCC_ANSI = $(HPCC) -Aa
+HPCC_STRICT = $(HPCC) -Aa
+HPCC_TRAD = $(HPCC) -Ac
+HPCC_WARN_YES = 
+HPCC_WARN_NO =  -w
+HPCC_OPT_YES =  -O
+HPCC_OPT_NO = -g
+HPCC_SFLAGS_YES= -Wl,-a,archive
+HPCC_SFLAGS_NO=
+HPCC_SLIBS_YES =
+HPCC_SLIBS_NO=
+HPCC_SHRLIB_CFLAGS_YES = +Z
+HPCC_SHRLIB_LDFLAGS_YES = -b
+HPCC_DEP_CFLAGS=+DAportable
+
+#Old HP C++ compiler
+#CCC = CC
+#CCC_NORMAL = $(CCC) +p
+
+#New HP C++ compiler
+CCC = aCC
+# avoid treating "future errors" as actual errors
+CCC_NORMAL = $(CCC) -AA -Aa +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
+CCC_STRICT = $(CCC) -AA -Aa +p
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES = +w
+CCC_WARN_NO =
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES= -Wl,-a,archive
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES =
+CCC_SLIBS_NO=
+CCC_SHRLIB_CFLAGS_YES = +Z
+# shared libs will be found by searching environment variable SHLIB_PATH,
+# then by searching the specified path (see below)
+CCC_SHRLIB_LDFLAGS_YES = -b
+CCC_DEPENDS_FLAG = +m
+CCC_DEP_CFLAGS=+DAportable
+
+# +DAportable causes portable object code to be created for execution
+# on different PA-Risc machines
+
+empty:=
+space:= $(empty) $(empty)
+
+ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX 
+ARCH_DEP_CXXFLAGS = -D_HPUX_SOURCE -DHP_UX
+ARCH_DEP_LDLIBS =
+ARCH_DEP_LDFLAGS = -Wl,+b,$(subst $(space),:,$(DEFAULT_SHRLIB_SEARCH_PATH)),+s

config/CONFIG.Host.sgi

@@ -0,0 +1,50 @@
+# CONFIG.Host.sgi
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.sgi
+
+ARCH_CLASS = sgi
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar
+ 
+# Configure OS vendor C compiler
+ACC = cc
+ACC_ANSI = $(ACC) -xansi
+ACC_STRICT = $(ACC) -xansi
+ACC_TRAD = $(ACC) -cckr -Xs
+ACC_WARN_YES = 
+ACC_WARN_NO =  -w
+ACC_OPT_YES =  -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+ACC_SLIBS_YES =
+ACC_SLIBS_NO=
+ACC_SHRLIB_CFLAGS_YES =  -KPIC
+ACC_SHRLIB_LDFLAGS_YES =  -shared
+
+# Configure OS vendor C++ compiler
+CCC = CC
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES =
+CCC_WARN_NO =
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES= -Bstatic
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES =
+CCC_SLIBS_NO=
+CCC_DEPENDS_FLAG =
+CCC_SHRLIB_CFLAGS_YES =  -KPIC
+CCC_SHRLIB_LDFLAGS_YES =  -shared
+
+####KRCC = ??
+
+ARCH_DEP_CFLAGS = -DSGI
+ARCH_DEP_LDFLAGS =
+

config/CONFIG.Host.solaris

@@ -0,0 +1,66 @@
+# CONFIG.Host.solaris
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solaris
+
+ARCH_CLASS = solaris
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+#
+# required by sun's C++ compiler
+#
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR) $@
+
+RANLIB =
+
+SPARCWORKS = /opt/SUNWspro
+
+# Configure OS vendor C compiler
+ACC = $(SPARCWORKS)/bin/cc
+ACC_ANSI = $(ACC) -Xa
+ACC_STRICT = $(ACC) -Xc -v
+ACC_TRAD = $(ACC) -Xs
+ACC_DEP_CFLAGS = -KPIC -D_REENTRANT
+
+ACC_WARN_YES = 
+ACC_WARN_NO =  -w
+ACC_OPT_YES =  -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
+ACC_SLIBS_NO=
+ACC_SHRLIB_CFLAGS_YES =
+ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
+
+# Configure OS vendor C++ compiler
+CCC = $(SPARCWORKS)/bin/CC
+CCC_NORMAL = $(CCC) +p
+CCC_STRICT = $(CCC) +p
+CCC_DEP_CFLAGS = -KPIC -D_REENTRANT
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES = +w
+CCC_WARN_NO = 
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES= -Bstatic
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
+CCC_SLIBS_NO=
+CCC_DEPENDS_FLAG = -xM1
+CCC_SHRLIB_CFLAGS_YES =
+CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
+ 
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
+
+# socket and nsl needed by libca.a
+ARCH_DEP_LDLIBS = -lsocket -lnsl
+

config/CONFIG.Host.solaris-x86

@@ -0,0 +1,10 @@
+# CONFIG.Host.solaris-x86
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solaris-x86
+
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
+
+# Solaris on x86
+ARCH_DEP_CPPFLAGS += -D_X86_
+

config/CONFIG.Host.solarisGnu

@@ -0,0 +1,29 @@
+# CONFIG.Host.solarisGnu
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solarisGnu
+
+ARCH_CLASS = solaris
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR) $@
+RANLIB =
+
+#==========================
+# These are overrides of ANSI and CPLUSPLUS values in CONFIG_SITE
+ANSI=GCC
+CPLUSPLUS=G++
+#==========================
+
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+
+# socket and nsl needed by libca.a
+ARCH_DEP_LDLIBS += -lsocket -lnsl
+

config/CONFIG.Host.sun4

@@ -0,0 +1,86 @@
+# CONFIG.Host.sun4
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.sun4
+
+ARCH_CLASS = sun4
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+#
+# required by sun's C++ compiler
+#
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR) $@
+
+RANLIB = ranlib
+RANLIBFLAGS = -t
+
+# Configure OS vendor C compilers
+ACC = /usr/lang/acc
+ACC_ANSI = $(ACC) -Xa
+ACC_STRICT = $(ACC) -Xc
+ACC_TRAD = $(ACC) -Xs
+ACC_WARN_YES = -vc
+ACC_WARN_NO = -w
+ACC_OPT_YES = -O
+ACC_OPT_NO = -g
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+ACC_SLIBS_YES=
+ACC_SLIBS_NO=
+#ACC_OP_SYS_LDFLAGS = -L$(SPECIAL_LANG)
+ACC_SHRLIB_CFLAGS_YES =  -pic
+ACC_SHRLIB_LDFLAGS_YES =  -assert pure-text -h $@
+
+SUNCC = cc
+SUNCC_ANSI = echo SUNCC_ANSI not defined
+SUNCC_STRICT = echo SUNCC_STRICT not defined
+SUNCC_TRAD = $(SUNCC)
+SUNCC_WARN_YES =
+SUNCC_WARN_NO = -w
+SUNCC_OPT_YES = -O
+SUNCC_OPT_NO = -g
+SUNCC_SFLAGS_YES= -Bstatic
+SUNCC_SFLAGS_NO=
+SUNCC_SLIBS_YES=
+SUNCC_SLIBS_NO=
+SUNCC_SHRLIB_CFLAGS_YES =  -pic
+SUNCC_SHRLIB_LDFLAGS_YES =  -assert pure-text -h $@
+
+# Configure OS vendor C++ compiler
+CCC = /usr/lang/CC
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC)
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES =
+CCC_WARN_NO =
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES = +w
+CCC_WARN_NO = 
+CCC_OPT_YES =  -O
+CCC_OPT_NO = -g
+CCC_SFLAGS_YES= -Bstatic
+CCC_SFLAGS_NO=
+CCC_SLIBS_YES=
+CCC_SLIBS_NO=
+CCC_SHRLIB_CFLAGS_YES =  -pic
+CCC_SHRLIB_LDFLAGS_YES =  -assert pure-text -h $@
+CCC_DEPENDS_FLAG = -xM1
+
+GCC_ANSI += -D__USE_FIXED_PROTOTYPES__
+GCC_STRICT += -D__USE_FIXED_PROTOTYPES__
+
+ACC_ARCH_DEP_LDLIBS =
+GCC_ARCH_DEP_LDLIBS = -liberty
+ARCH_DEP_LDLIBS = $($(ANSI)_ARCH_DEP_LDLIBS)
+
+ARCH_DEP_CFLAGS = -DSUNOS4
+
+#SPECIAL_LANG = /usr/lang/SC3.0.1
+#SPECIAL_LANG = /usr/lang/lib
+

config/CONFIG.Linux

@@ -1,131 +0,0 @@
-#
-# $Id$
-#
-#  This file is maintained by the EPICS community.
-
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-
-# BUILD_TYPE
-#   Currently either Vx or Unix
-BUILD_TYPE = Unix
- 
-GCC = gcc
-ACC = acc
-SUNCC = cc
-AR = ar 
-ARFLAGS = r
-ARCMD = $(AR) $(ARFLAGS)
-RANLIB = ranlib
-RANLIBFLAGS = -t
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = g++
-CCC = CC
-MV = mv
-RMDIR = rm -rf
-MKDIR = mkdir
-CHMOD = "/bin/chmod"
-WHAT = what
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
-ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
-ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
-ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
-ACC_STRICT_INVOKE_W_NO = $(ACC) -Xc -w
-ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc
-SUNCC_TRAD_INVOKE_W_NO = $(SUNCC) -w
-SUNCC_TRAD_INVOKE_W_YES = $(SUNCC)
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
- 
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
-CCC_LD_FLAGS = 
-CCC_LD_LIBS = 
-CCC_TEMPL_INST_FLAG =
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-# Static Build options
-ACC_SFLAGS_YES= -Bstatic
-ACC_SFLAGS_NO=
-CC_SFLAGS_YES= -Bstatic
-CC_SFLAGS_NO=
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX 
- 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
-UNIX_LDLIBS = -lm 
- 
-ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
-	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override SUN defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
-DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.Linux

config/CONFIG.LynxOS

@@ -0,0 +1,142 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+#
+# This file contains definitions for Vx builds
+
+#--------------------------------------------------
+# operating system class (include/os/<os_class>)
+OS_CLASS = LynxOS
+
+lynx_pc486 =YES
+
+CC = gcc
+CXX = g++
+
+#--------------------------------------------------
+# vxWorks directory definitions
+
+# The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
+# can be overridden for specific host architectures
+# by creating a CONFIG_SITE.Vx.<host_arch> file with
+# the override definitions.
+ 
+# Tornado directory definitions
+VX_INCLUDE_YES =
+VX_GNU_YES =
+VX_GNU_BIN_YES =
+VX_GNU_LIB_YES =
+
+
+# pre Torando directory definitions
+VX_INCLUDE_NO =
+VX_GNU_NO =
+VX_GNU_BIN_NO =
+ 
+# directory definitions
+VX_DIR =
+VX_INCLUDE =
+VX_GNU = 
+
+GNU_BIN = /usr/local/bin
+GNU_LIB = /usr/local/lib
+
+#--------------------------------------------------
+# VxWorks command definitions
+
+#GCC = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#AR = $(GNU_BIN)/ar$(CMPLR_SUFFIX)
+#CPP = $(GNU_BIN)/cpp$(CMPLR_SUFFIX) -nostdinc
+#RANLIB = $(GNU_BIN)/ranlib$(CMPLR_SUFFIX)
+#LD = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
+
+AR = ar -rc
+ARCMD = $(AR) $@
+RANLIB = ranlib -t
+GCC = gcc 
+CPP = cpp
+LD = ld -r
+
+
+#--------------------------------------------------
+# Tornado C++ crosscompiler definitions
+
+#CPLUSPLUS_YES = G++
+#G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#LD_G++ = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
+#NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)
+#MUNCH = $(GNU_BIN)/munch
+
+CPLUSPLUS_YES = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
+G++ = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
+LD_G++ = ld -r
+NM = nm
+
+#--------------------------------------------------
+# Pre Tornado C++ crosscompiler definitions
+# These are pre tornado definitions for Hideos builds (defined for 68k only)
+
+#CPLUSPLUS_NO = CCC
+#CCC = $(GNU_DIR)/bin/sun3-g++ -B$(GNU_DIR)/lib/gcc-lib/ -nostdinc -DEXPL_TEMPL
+#LD_CCC = $(GNU_DIR)/bin/sun3-ld $(OLD_ARCH_DEP_LDFLAGS) -r
+
+CPLUSPLUS_NO = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
+CCC = g++ -DLynxOS -DLynxOS_pc486 -mposix -D_X86_ -DEXPL_TEMP
+LD_CCC = ld -r
+
+CCC_NORMAL = $(CCC) $(OLD_ARCH_DEP_CFLAGS)
+CCC_STRICT = $(CCC) -ansi -pedantic -Wall -traditional $(OLD_ARCH_DEP_CFLAGS)
+CCC_TRAD = $(CCC) -traditional $(OLD_ARCH_DEP_CFLAGS)
+CCC_TEMPL_INST_FLAG = -DEXPL_TEMP
+CCC_WARN_YES = -Wall
+CCC_WARN_NO = -w
+CCC_OPT_YES = -O
+CCC_OPT_NO = -g
+CCC_DEPENDS_FLAG =  -pedantic -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
+CPU = i486
+OS = lynxos
+OLD_ARCH_DEP_CFLAGS = -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
+#	 --no-builtin -Wa,"-m68040" -DOS_EQ_$(OS) \
+#	-DBOARD_EQ_$(BOARD) -DCPU_EQ_$(CPU) -DBOARD=$(BOARD)
+OLD_ARCH_DEP_LDFLAGS = -mposix -lc -lbsd -lnsl -lm -lposix4d9 -llynx
+#	 -Ur -N -T$(EPICS_BASE_BIN)/vxldscript.MRI
+
+#--------------------------------------------------
+# C compiler definitions  
+ANSI = gcc -ansi
+
+#--------------------------------------------------
+# Command definitions
+CPLUSPLUS = g++
+#	 $(CPLUSPLUS_$(TORNADO))
+LD_CXX = ld -r
+#	 $(LD_$(CPLUSPLUS))
+
+#--------------------------------------------------
+# Operating system flags
+OP_SYS_INCLUDES =
+#	 -I$(VX_INCLUDE)
+OP_SYS_CFLAGS =  -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
+#		-DvxWorks -DV5_vxWorks -fno-builtin 
+OP_SYS_LDFLAGS = -DLynxOS -DLynxOS_pc486 -mposix -D_X86_
+OP_SYS_LDLIBS = -lc -lbsd -lnsl -lm -lposix4d9 -llynx
+
+#--------------------------------------------------
+# Optimization flag overrides
+GCC_OPT_YES = -O	
+#	2 -fstrength-reduce
+G++_OPT_YES = -O
+#	2 -fstrength-reduce
+
+#--------------------------------------------------
+# Link definitions
+LINK.c = $(LD) $(LDFLAGS) -o
+LINK.cc = $(LD_CXX) $(LDFLAGS) -o
+

config/CONFIG.Vx

@@ -0,0 +1,138 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+#
+# This file contains definitions for Vx builds
+
+#--------------------------------------------------
+# operating system class (include/os/<os_class>)
+OS_CLASS = vxWorks
+
+#--------------------------------------------------
+# vxWorks directory definitions
+
+# The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
+# can be overridden for specific host architectures
+# by creating a CONFIG_SITE.Vx.<host_arch> file with
+# the override definitions.
+
+# Tornado directory definitions
+VX_INCLUDE_YES = $(VX_DIR)/target/h
+VX_GNU_YES = $(VX_DIR)/host/$(WIND_HOST_TYPE)
+VX_GNU_BIN_YES = $(VX_GNU)/bin
+VX_GNU_LIB_YES = $(VX_GNU)/lib
+
+# pre Torando directory definitions
+VX_INCLUDE_NO = $(VX_DIR)/h
+VX_GNU_BIN_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+VX_GNU_LIB_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
+
+# directory definitions
+VX_DIR = $(VX_DIR_$(TORNADO))
+VX_INCLUDE = $(VX_INCLUDE_$(TORNADO))
+VX_GNU = $(VX_GNU_$(TORNADO))
+GNU_BIN = $(VX_GNU_BIN_$(TORNADO))
+GNU_LIB = $(VX_GNU_LIB_$(TORNADO))
+export GCC_EXEC_PREFIX = $(GNU_LIB)/gcc-lib/
+export WIND_BASE = $(VX_DIR)
+
+#--------------------------------------------------
+# VxWorks command definitions
+
+GCC = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+AR = $(GNU_BIN)/ar$(CMPLR_SUFFIX)
+CPP = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc -x c -E
+RANLIB = $(GNU_BIN)/ranlib$(CMPLR_SUFFIX)
+LD = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
+
+#--------------------------------------------------
+# Tornado C++ crosscompiler definitions
+
+CPLUSPLUS_YES = G++
+G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+LD_G++ = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
+NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)
+MUNCH = $(GNU_BIN)/munch
+
+#--------------------------------------------------
+# Pre Tornado C++ crosscompiler definitions
+# These are pre tornado definitions for Hideos builds (defined for 68k only)
+
+CPLUSPLUS_NO = CCC
+CCC = $(GNU_DIR)/bin/sun3-g++ -B$(GNU_DIR)/lib/gcc-lib/ -nostdinc -DEXPL_TEMPL
+LD_CCC = $(GNU_DIR)/bin/sun3-ld $(OLD_ARCH_DEP_LDFLAGS) -r
+
+CCC_NORMAL = $(CCC) $(OLD_ARCH_DEP_CFLAGS)
+CCC_STRICT = $(CCC) -ansi -pedantic -Wtraditional $(OLD_ARCH_DEP_CFLAGS)
+CCC_TRAD = $(CCC) -traditional $(OLD_ARCH_DEP_CFLAGS)
+CCC_TEMPL_INST_FLAG =
+CCC_WARN_YES = -Wall
+CCC_WARN_NO = -w
+CCC_OPT_YES = -O2 -fstrength-reduce
+CCC_OPT_NO =
+CCC_DEPENDS_FLAG = -MM
+CPU = 68000
+OS = VXWORKS
+OLD_ARCH_DEP_CFLAGS = --no-builtin -Wa,"-m68040" -DOS_EQ_$(OS) \
+	-DBOARD_EQ_$(BOARD) -DCPU_EQ_$(CPU) -DBOARD=$(BOARD)
+OLD_ARCH_DEP_LDFLAGS = -Ur -N -T$(EPICS_BASE_BIN)/vxldscript.MRI
+
+#--------------------------------------------------
+# C compiler definitions  
+ANSI = GCC
+
+#--------------------------------------------------
+# Command definitions
+CPLUSPLUS = $(CPLUSPLUS_$(TORNADO))
+LD_CXX = $(LD_$(CPLUSPLUS))
+
+#--------------------------------------------------
+# Override flags in CONFIG_COMMON
+GCC_DEP_CFLAGS = -D_REENTRANT
+G++_DEP_CFLAGS = -D_REENTRANT
+
+#--------------------------------------------------
+# Operating system flags
+OP_SYS_INCLUDES = -I$(VX_INCLUDE)
+OP_SYS_CFLAGS = -DvxWorks -DV5_vxWorks -fno-builtin 
+OP_SYS_LDFLAGS =
+OP_SYS_LDLIBS =
+
+# Fix for vxWorks headers using macros defined in
+# vxWorks.h but not including vxWorks.h
+ifeq ($(TORNADO), YES)
+	OP_SYS_CFLAGS += -include $(VX_INCLUDE)/vxWorks.h
+endif
+
+#--------------------------------------------------
+# Optimization flag overrides
+GCC_OPT_YES = -O2 -fstrength-reduce
+GCC_OPT_NO = -g
+G++_OPT_YES = -O2 -fstrength-reduce
+G++_OPT_NO = -g
+
+OPT_CFLAGS = $($(ANSI)_OPT_$(VX_OPT))
+OPT_CXXFLAGS = $($(CPLUSPLUS)_OPT_$(VX_OPT))
+
+#--------------------------------------------------
+# Warning flag overrides
+GCC_WARN_YES = -Wall
+GCC_WARN_NO = -w
+G++_WARN_YES = -Wall
+G++_WARN_NO = -w
+
+WARN_CFLAGS = $($(ANSI)_WARN_$(VX_WARN))
+WARN_CXXFLAGS = $($(CPLUSPLUS)_WARN_$(VX_WARN))
+
+#--------------------------------------------------
+# Link definitions
+LINK.c = $(LD) $(LDFLAGS) -o
+LINK.cc = $(LD_CXX) $(LDFLAGS) -o
+

config/CONFIG.Vx.68k

@@ -1,121 +0,0 @@
-
-# $Id$
-#
-# This file is maintained by the EPICS community.
-
-AR = $(VX_GNU_BIN)/ar68k
-RANLIB = $(VX_GNU_BIN)/ranlib68k
-YACC = $(EYACC)
-LEX = $(ELEX)
-CC = $(VX_GNU_BIN)/cc68k -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
-CPP = $(VX_GNU_BIN)/cpp68k -nostdinc
-#CPP = $(CC) -E
-GCC = $(CC)
-LD = $(VX_GNU_BIN)/ld68k -r
-EPICS_LDLIBS =
-MV=mv
-RM=rm -f
-MKDIR = mkdir
-RMDIR=rm -rf
-WHAT = what
-
-#----------------------------
-# Only G++ currently supported
-CPLUSPLUS = G++
-CXXCMPLR = NORMAL
-VX_OPT = YES
-BOARD = $(subst mv,MV,$(T_A))
-CPU = 68000
-OS = VXWORKS
-#----------------------------
-
-CCC = $(VX_GNU_BIN)/cc68k -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
-AR_CCC = $(VX_GNU_BIN)/ar68k
-CPP_CCC = $(VX_GNU_BIN)/cpp68k -nostdinc
-RANLIB_CCC = $(VX_GNU_BIN)/ranlib68k
-LD_CCC = $(VX_GNU_BIN)/ld68k
-CCC_CCFLAGS =
-CCC_ARCH_DEP_CCFLAGS =
-CCC_ARCH_DEP_LDFLAGS =
-
-G++ = $(GNU_BIN)/sun3-g++ -B$(GNU_LIB)/gcc-lib/ -nostdinc -DEXPL_TEMPL
-AR_G++ = $(GNU_BIN)/sun3-ar
-CPP_G++ = $(GNU_BIN)/sun3-cpp
-RANLIB_G++ = $(GNU_BIN)/sun3-ranlib
-LD_G++ = $(GNU_BIN)/sun3-ld
-G++_ARCH_DEP_CCFLAGS = --no-builtin -Wa,"-m68040" -DOS_EQ_$(OS) \
-	-DBOARD_EQ_$(BOARD) -DCPU_EQ_$(CPU) -DBOARD=$(BOARD)
-G++_ARCH_DEP_LDFLAGS = -Ur -N -T$(EPICS_BASE_BIN)/vxldscript.MRI
-
-CCC_NORMAL = $(CCC)
-CCC_STRICT = $(CCC) -ansi -pedantic -Wtraditional \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_NORMAL = $(G++) 
-G++_STRICT = $(G++) -ansi -pedantic -Wtraditional
-
-CXX = $($(CPLUSPLUS)_$(CXXCMPLR))
-AR_CXX = $(AR_$(CPLUSPLUS))
-CPP_CXX = $(CPP_$(CPLUSPLUS))
-RANLIB_CXX = $(RANLIB_$(CPLUSPLUS))
-LD_CXX = $(LD_$(CPLUSPLUS))
-
-ARCH_DEP_CXXFLAGS += $($(CPLUSPLUS)_ARCH_DEP_CCFLAGS) $(ARCH_DEP_CFLAGS)
-ARCH_DEP_CXXLDFLAGS =  $($(CPLUSPLUS)_ARCH_DEP_LDFLAGS) $(ARCH_DEP_LDFLAGS)
-
-
-# special c library requirements
-SPECIAL_LANG =
-
-# Compiler flags, don't mess with this
-#    Optimization flags
-VX_OPT_YES = -O
-VX_OPT_NO =
-VX_OPT_FLAGS = $(VX_OPT_$(VX_OPT))
- 
-#    Include files
-VX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-	-I$(EPICS_BASE_INCLUDE)/os/vxWorks -I$(VX_INCLUDE)
-
-#    Warnings
-#At some time we should turn on pedantic
-VX_WARN_YES = -Wall -pedantic -ansi
-#VX_WARN_YES = -Wall
-VX_WARN_NO =
-VX_WARN_FLAGS = $(VX_WARN_$(VX_WARN))
- 
-#    Operating system flags
-VX_OP_SYS_FLAGS = -DvxWorks -DV5_vxWorks
- 
-#    Arch dependent flags are set in CONFIG_ARCH.*
-VX_CFLAGS = $(VX_OPT_FLAGS) $(VX_WARN_FLAGS) \
-        $(VX_INCLUDES) $(VX_OP_SYS_FLAGS)
-VX_CXXFLAGS += $(VX_CFLAGS)
- 
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(VX_CFLAGS)
-CXXFLAGS = $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(VX_CXXFLAGS)
-LDFLAGS =    $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(VX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(VX_LDLIBS)
-CXXLDLIBS = $(TARGET_LDLIBS) $(USR_CXXLDLIBS) $(ARCH_DEP_LDLIBS) $(VX_LDLIBS)
-CXXLDFLAGS = $(TARGET_LDFLAGS) $(USR_CXXLDFLAGS) $(ARCH_DEP_CXXLDFLAGS) $(VX_LDFLAGS)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-# Build compile line here
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-LINK.c = $(LD) $(LDFLAGS) -o
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-LINK.cc = $(LD_CXX) $(CXXLDFLAGS) -o
-
-CPPSNCFLAGS = $(VX_INCLUDES)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) >> .DEPENDS
-DEPENDS_RULE.cc = -$(COMPILE.cc) -M $(SRCS.cc) >> .DEPENDS 
-
-# Allow site host architecture specific overrides
--include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(ARCH_CLASS).$(HOST_ARCH)

config/CONFIG.Vx.frc40

@@ -0,0 +1,15 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=MC68040 -DCPU_FAMILY=MC680X0
+ARCH_DEP_CFLAGS = -m68040
+

config/CONFIG.Vx.frc5ce

@@ -0,0 +1,21 @@
+# CONFIG.Vx.frc5ce
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = sparc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = sparc
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=SPARC -DCPU_FAMILY=SPARC
+ARCH_DEP_CFLAGS =
+# Removed -O2 [24/12/96 PMM]
+OLD_ARCH_DEP_CXXFLAGS = -fno-builtin -ansi -pipe -nostdinc -DCPU=SPARC \
+                      -DVXWORKS -Dsigned= -Dvolatile= +V  
+
+# Definitions for pre Tornado c++ builds
+CCC = CENTERLINE
+CCC_NORMAL = $(VX_DIR)/bin/sun4/CCsparc
+CCC_STRICT = $(VX_DIR)/bin/sun4/CCsparc
+

config/CONFIG.Vx.hkbaja47

@@ -0,0 +1,20 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = mips
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = mips
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=R4000
+ARCH_DEP_CFLAGS = -EB -mcpu=r4000 -mips3 -mgp32 -mfp32 -non_shared -G 0
+
+# Arch specific flags
+GCC += -fsigned-char
+LD += -EB -X
+

config/CONFIG.Vx.hkv2f

@@ -3,14 +3,14 @@
 #
 # This file is maintained by the EPICS community.
 
-BUILD_TYPE = Vx
-
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
 # For Vx directories of form:
 #   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 ARCH_CLASS = 68k
 
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
- 
 # Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68060 -m68040 -DCPU_FAMILY=MC680X0
+ARCH_DEP_CPPFLAGS = -DCPU=MC68020
+ARCH_DEP_CFLAGS = -m68020
  

config/CONFIG.Vx.mv147

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+ 
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=MC68030
+ARCH_DEP_CFLAGS = -m68030
+ 

config/CONFIG.Vx.mv1604

@@ -0,0 +1,15 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags (TRUE=1 via LBL; needed in camessage.c)
+ARCH_DEP_CPPFLAGS = -DCPU_FAMILY=PPC -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = -fno-for-scope
+

config/CONFIG.Vx.mv162

@@ -3,14 +3,14 @@
 #
 # This file is maintained by the EPICS community.
 
-BUILD_TYPE = Vx
-
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
 # For Vx directories of form:
 #   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 ARCH_CLASS = 68k
- 
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
 
 # Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68030 -m68030 -DCPU_FAMILY=MC680X0
+ARCH_DEP_CPPFLAGS = -DCPU=MC68040
+ARCH_DEP_CFLAGS = -m68040
  

config/CONFIG.Vx.mv162lc

@@ -0,0 +1,15 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=MC68LC040
+ARCH_DEP_CFLAGS = -m68040 -msoft-float

config/CONFIG.Vx.mv167

@@ -3,14 +3,14 @@
 #
 # This file is maintained by the EPICS community.
 
-BUILD_TYPE = Vx
-
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
 # For Vx directories of form:
 #   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 ARCH_CLASS = 68k
 
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
- 
 # Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68040 -m68040 -DCPU_FAMILY=MC680X0
+ARCH_DEP_CPPFLAGS = -DCPU=MC68040
+ARCH_DEP_CFLAGS = -m68040
  

config/CONFIG.Vx.mv177

@@ -3,15 +3,14 @@
 #
 # This file is maintained by the EPICS community.
 
-# BUILD_TYPE
-BUILD_TYPE = Vx
-
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
 # For Vx directories of form:
 #   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 ARCH_CLASS = 68k
 
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
- 
 # Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68040 -m68040 -DCPU_FAMILY=MC680X0
+ARCH_DEP_CPPFLAGS = -DCPU=MC68060
+ARCH_DEP_CFLAGS = -m68040
  

config/CONFIG.Vx.mv2700

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = mv2700
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604
+ARCH_DEP_CFLAGS = -mcpu=604
+ 

config/CONFIG.Vx.niCpu030

@@ -0,0 +1,16 @@
+
+#  CONFIG.Vx.niCpu030
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 68k
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=MC68030 -DNICPU030
+ARCH_DEP_CFLAGS = -m68030
+ 

config/CONFIG.Vx.pc486

@@ -1,93 +1,17 @@
-# $Id$
+
+# CONFIG.Vx.pc486
 #
 # This file is maintained by the EPICS community.
 
-# OLDINSTALL def used only for releases prior to R3.12.2.2
-# Unix Compiler and other Utilities
-OLDINSTALL = echo CONFIG.Vx.486 OLDINSTALL
-
-CP   =$(PERL) $(EPICS_BASE)/src/tools/cp.pl
-MV   =$(PERL) $(EPICS_BASE)/src/tools/mv.pl
-RM   =$(PERL) $(EPICS_BASE)/src/tools/rm.pl -f
-MKDIR=$(PERL) $(EPICS_BASE)/src/tools/mkdir.pl
-RMDIR=$(PERL) $(EPICS_BASE)/src/tools/rm.pl -rf
-CHMOD=echo
-WHAT=echo
-
-#	overrides defines in CONFIG_SITE that don't fit Tornado
-#
-#	We are lucky because
-#	this should not really be site specific
-#
-#	(if Tornado is installed correctly
-#	   -> WIND_BASE, WIND_HOST_TYPE set  )
-#
-#	At first we hack a little bit on WIND_BASE 
-#	to convert the DOS style into a Unix style path:
-#
-#	If C: was in WIND_BASE, it's converted into c: (lowercase),
-#	then c: is removed and all '\' are converted into '/'.
-SANE_WIND_BASE := $(subst \,/,$(subst c:,,$(subst C:,c:,$(WIND_BASE))))
-VX_DIR         := $(SANE_WIND_BASE)/target
-VX_GNU         := $(SANE_WIND_BASE)/host/$(WIND_HOST_TYPE)
-VX_GNU_BIN     := $(VX_GNU)/bin
-VX_GNU_LIB     := $(VX_GNU)/lib
-VX_IMAGE        = $(VX_CONFIG_DIR)/$(T_A)/vxWorks
-VX_IMAGE_SYM    = $(VX_CONFIG_DIR)/$(T_A)/vxWorks.sym
-
-
-AR = $(VX_GNU_BIN)/ar386
-RANLIB = $(VX_GNU_BIN)/ranlib386
-YACC = $(EYACC)
-LEX = $(ELEX)
-CC = $(VX_GNU_BIN)/cc386 -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc -fno-builtin -fno-defer-pop
-CPP = $(VX_GNU_BIN)/cpp386 -nostdinc
-#CPP = $(CC) -E
-GCC = $(CC)
-LD = $(VX_GNU_BIN)/ld386 -r
-EPICS_LDLIBS =
-
-# special c library requirements
-SPECIAL_LANG =
-
-# Compiler flags, don't mess with this
-#    Optimization flags
-VX_OPT_YES = -O
-VX_OPT_NO = -O0
-VX_OPT_FLAGS = $(VX_OPT_$(VX_OPT))
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 386
  
-#    Include files
-VX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE)	\
-	 -I$(EPICS_BASE_INCLUDE)/os/vxWorks -I$(VX_INCLUDE)
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = pc486
 
-#    Warnings
-#At some time we should turn on pedantic
-#VX_WARN_YES = -Wall -pedantic
-VX_WARN_YES = -W
-VX_WARN_NO =
-VX_WARN_FLAGS = $(VX_WARN_$(VX_WARN))
- 
-#    Operating system flags
-VX_OP_SYS_FLAGS = -DvxWorks -DV5_vxWorks
- 
-#    Arch dependent flags are set in CONFIG_ARCH.*
-VX_CFLAGS = $(VX_OPT_FLAGS) $(VX_WARN_FLAGS) \
-        $(VX_INCLUDES) $(VX_OP_SYS_FLAGS)
- 
-VX_LDFLAGS = -o
- 
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
+ARCH_DEP_CFLAGS = -m486
+ARCH_DEP_CXXFLAGS += -x 'c++' 
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
 
-CFLAGS = $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(VX_CFLAGS)
-LDFLAGS = $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(VX_LDFLAGS)
- 
-# Build compile line here
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CC) -x 'c++' -DEXPL_TEMPL $(CFLAGS) $(CPPFLAGS)  -c
-LINK.c = $(LD) $(LDFLAGS)
-
-CPPSNCFLAGS = $(USR_INCLUDES) $(VX_INCLUDES)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) >> .DEPENDS
-DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.68k

config/CONFIG.Vx.ppc603

@@ -0,0 +1,16 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc603_long

@@ -0,0 +1,16 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc604

@@ -0,0 +1,17 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
+

config/CONFIG.Vx.ppc604_long

@@ -0,0 +1,17 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
+

config/CONFIG.Vx.sbs_pc6

@@ -0,0 +1,16 @@
+# Created by Korobov for SBS PC6
+# CONFIG.Vx.sbs_pc6
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 386
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = sbs_pc6
+
+ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -DCPU_VARIANT=PENTIUM -D_X86_ 
+ARCH_DEP_CFLAGS = -mpentium
+ARCH_DEP_CXXFLAGS += -x 'c++'
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop

config/CONFIG.Vx.vxipc

@@ -0,0 +1,17 @@
+
+# CONFIG.Vx.VXIpc
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 386
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = pc486
+
+ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
+ARCH_DEP_CFLAGS = -m486
+ARCH_DEP_CXXFLAGS += -x 'c++' 
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
+

config/CONFIG.WIN32

@@ -1,138 +0,0 @@
-#	CONFIG.WIN32  -kuk-
-#
-#	The current make-system for WIN32
-#	needs
-#	* gnumake (OK, sources for WIN32 are available)
-#	* Perl    (e.g. from www.perl.com )
-#	* a UNIX-like shell (ouch!)
-#
-#	I found no fully operational shell and no sources for WIN32 so far,
-#	Cygnus' bash e.g. cannot handle this:
-#	(echo a>a; echo b>>a)
-#	Right now I use the knts that I wrote and simplified scripts.
-#	Jeff eliminated many shell-lines in Makefile.*.
-#
-
-#	Set this to the UNIX-like shell that you have:
-#
-#	it is now possible to just use the DOS shell
-#
-#SHELL=knts
-
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
-# BUILD_TYPE
-#   Currently either Vx or Host (latter used to be Unix
-BUILD_TYPE=Host
-
-#
-# optimize/debug flags
-#
-HOST_OPT = YES 
-# 	-Ox  : maximum optimizations
-#	-Wn  ; use this warning level (all warnings at level 4)
-CXX_OPT_FLAGS_YES = -Ox -W1
-#	-Zi  : include debugging info in object files
-CXX_OPT_FLAGS_NO = -Zi -W1
-CXX_OPT_FLAGS = $(CXX_OPT_FLAGS_$(HOST_OPT))
-LINK_OPT_FLAGS_YES = 
-LINK_OPT_FLAGS_NO = -debug
-LINK_OPT_FLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
-
-#	to identify the general architecture class:
-#	should be BSD, SYSV, WIN32, ...
-#	is: WIN32, sun4, hpux, linux, ...
-#
-ARCH_CLASS=WIN32
-
-#	ifdef WIN32   looks better that  ifeq ($(ARCH_CLASS),WIN32)  ??
-WIN32=1
-
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-YACC  = $(EYACC)
-LEX   = $(ELEX)
-CC    = cl -nologo
-CP    = $(PERL) $(EPICS_BASE)/src/tools/cp.pl
-MV    = $(PERL) $(EPICS_BASE)/src/tools/mv.pl
-RM    = $(PERL) $(EPICS_BASE)/src/tools/rm.pl -f
-MKDIR = $(PERL) $(EPICS_BASE)/src/tools/mkdir.pl
-RMDIR = $(PERL) $(EPICS_BASE)/src/tools/rm.pl -rf
-EXE=.exe
-OBJ=.obj
-
-# Include files
-HOST_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) \
-	-I$(EPICS_BASE_INCLUDE)	-I$(EPICS_BASE_INCLUDE)/os/$(ARCH_CLASS)
- 
-#	Operating system flags (from win32.mak)
-#
-#	__STDC__=0 is a real great idea of Jeff that gives us both:
-#	1) define STDC for EPICS code (pretend ANSI conformance)
-#	2) set it to 0 to use MS C "extensions" (open for _open etc.)
-#	   because MS uses:   if __STDC__ ... disable many nice things
-#
-#	-MDd : use MSVCRTD (run-time as DLL, multi-thread support)
-#	       this also calls for _DLL
-#
-OP_SYS_FLAGS:=-MDd $(CXX_OPT_FLAGS) -VMG -VMV -DWIN32 -D_WIN32 -D_DEBUG -D_WINDOWS \
-	-D_X86_ -D_NTSDK -D_DLL -D__STDC__=0
-
-
-HOST_LDLIBS:=user32.lib kernel32.lib wsock32.lib advapi32.lib winmm.lib
-HOST_LDFLAGS:=-nologo -libpath:$(EPICS_BASE_LIB)
-
-#	Files and flags needed to link DLLs (used in RULES.Host)
-#
-#	Strange but seems to work without: WIN32_DLLFLAGS should contain
-#	an entry point:
-#		'-entry:_DllMainCRTStartup$(DLLENTRY)'
-DLLENTRY:=@12
-
-#	yes, for MS it's I386 for 386, 486, Pentium!
-#	don't mix this with VxWorks which has different BSPs for [34]86 !
-WIN32_DLLFLAGS:=$(HOST_LDFLAGS) $(HOST_LDLIBS)\
-	-subsystem:windows -dll -incremental:no $(LINK_OPT_FLAGS) -machine:I386 
-
-
-ARCH_DEP_CFLAGS =
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-HOST_CFLAGS = $(HOST_SFLAGS) $(HOST_INCLUDES) $(OP_SYS_FLAGS)
- 
-HOST_CXXFLAGS = $(HOST_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(HOST_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(HOST_CFLAGS)
-CXXFLAGS = $(HOST_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(HOST_CXXFLAGS)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-CXX=cl -nologo
-
-LDFLAGS=$(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(HOST_LDFLAGS)
-LDLIBS=$(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(HOST_LDLIBS)
- 
-# Override SUN defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-
-#	Problem: MS Visual C++ does not recognize  *.cc as C++ source,
-#	we have to compile xx.cc  using the flag -Tp xx.cc,
-#	i.e.  -Tp  has to be immediately before the source file name
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -DEXPL_TEMPL -c -Tp
-
-LINK.c=link $(LINK_OPT_FLAGS) $(LDFLAGS) -out:$@
-LINK.cc=$(LINK.c)
-
-#	The DEPENDS_RULE may be a script on other systems,
-#	if you need different rules for .c and .cc,
-#	that script has to figure out what to call.
-#
-DEPENDS_RULE = @echo no DEPENDS_RULE defined in CONFIG.WIN32

config/CONFIG.alpha

@@ -1,143 +0,0 @@
-# CONFIG.alpha
-#
-#  This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-#   Currently either Vx or Host
-BUILD_TYPE = Host
-
-ARCH_CLASS = alpha
-
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-GCC = gcc
-ACC = cc
-
-AR = ar -rc
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR)
-CCC_AR = $(AR)
-ARCMD = $($(CPLUSPLUS)_AR)
-
-RANLIB = ranlib
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = g++
-CCC = cxx
-
-CP=cp
-MV = mv
-RM=rm -f
-RMDIR = rm -rf
-MKDIR = mkdir
-CHMOD = "/bin/chmod"
-WHAT = what
-
-EXE=
-OBJ=.o
-
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -std -w
-ACC_ANSI_INVOKE_W_YES = $(ACC) -std
-ACC_STRICT_INVOKE_W_YES = $(ACC) -std1 -w
-ACC_STRICT_INVOKE_W_NO = $(ACC) -std1
-ACC_TRAD_INVOKE_W_NO = $(ACC) -std0 -w
-ACC_TRAD_INVOKE_W_YES = $(ACC) -std0
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
- 
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
-CCC_LD_FLAGS =
-CCC_LD_LIBS = 
-CCC_TEMPL_INST_FLAG =
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-# Static Build options
-ACC_SFLAGS_YES= -non_shared
-ACC_SFLAGS_NO= -call_shared
-CC_SFLAGS_YES= -non_shared
-CC_SFLAGS_NO= -call_shared
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-SPECIAL_LDFLAGS = 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
-UNIX_LDLIBS = -lm
- 
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -D_OSF_SOURCE
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-ARCH_DEP_LDLIBS = -lnsl
-
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
-	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CCC) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-DEPEND_RULE.c = @echo no DEPENDS_RULE.c defined in CONFIG.alpha
-DEPEND_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.alpha
-

config/CONFIG.cygwin32

@@ -1,138 +0,0 @@
-#
-# $Id$
-#
-#  This file is maintained by the EPICS community.
-
-BUILD_TYPE = Host
-
-ARCH_CLASS = cygwin32
-
-GCC = gcc
-G++ = g++
-
-#==========================
-# Fix for cygwin32 beta17.1 includes
-CXX_INCLUDES = /usr/local/include/g++
-#==========================
- 
-# Override values in CONFIG_SITE
-ANSI=GCC
-STANDARD=GCC
-CPLUSPLUS=G++
- 
-EXE=.exe
-
-OBJ=.o
-
-AR = ar
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR)
-ARCMD = $($(CPLUSPLUS)_AR)
-
-RANLIB = ranlib
-YACC = $(EYACC)
-LEX = $(ELEX)
-RMDIR = rm -rf
-MKDIR = mkdir
-CP=cp
-MV=mv
-RM=rm -f
-CHMOD = xxxx
-WHAT = echo
-
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
-GCC_LD_LIBS = 
-GCC_LD_FLAGS =
-
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
-LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
-LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
-CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
-LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
-LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
-LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
-CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
-
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
- 
-# GNU make likes CXX
-CXX = $(CXX_$(CXXCMPLR))
-
-# Static Build options
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-SL_OLD = $($(STANDARD)_SLIBS_$(STATIC_BUILD))
-SL_ANSI = $($(ANSI)_SLIBS_$(STATIC_BUILD))
-SL_STRICT = $(SL_ANSI)
-UNIX_SLIBS = $(SL_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
-
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
-UNIX_LDLIBS = $(UNIX_SLIBS) -lm $(CCOMPILER_LDLIBS)
- 
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCYGWIN32
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS) -I$(CXX_INCLUDES)
-#ARCH_DEP_LDLIBS = -lsocket -lnsl
-# -lsocket     needed by libca.a
-# -lnsl        needed by libca.a 
- 
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-#DEPENDS_RULE.c = -$(COMPILE.c) -xM $(SRCS.c) > .DEPENDS
-#DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.cygwin32
-DEPENDS_RULE = -$(COMPILE.c) -MM $(SRCS.c) $(SRCS.cc) > .DEPENDS

config/CONFIG.hkv2f

@@ -1,17 +0,0 @@
-
-# $Id$
-#
-# This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-BUILD_TYPE = Vx
-
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = 68k
-
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
- 
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68020 -m68020 -DCPU_FAMILY=MC680X0
- 

config/CONFIG.hp700

@@ -1,144 +0,0 @@
-# CONFIG.Unix.hp700
-#
-#  This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-#   Currently either Vx or Unix
-BUILD_TYPE = Host
-
-ARCH_CLASS = hp700
-
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-GCC = gcc
-ACC = cc -Aa
-HPACC = cc -Aa
-HPCC = cc -Ac
-TRADCC = cc
-AR = ar 
-ARCMD = $(AR) $(ARFLAGS)
-
-RANLIB = ranlib
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = g++
-CCC = CC
-
-CP = cp
-MV = mv
-RM=rm -f
-RMDIR = rm -rf
-MKDIR = mkdir
-CHMOD = "/bin/chmod"
-WHAT = what
-
-EXE=
-OBJ=.o
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -w
-ACC_ANSI_INVOKE_W_YES = $(ACC)
-ACC_TRAD_INVOKE_W_NO = $(TRADCC) -w
-ACC_TRAD_INVOKE_W_YES = $(TRADCC)
-ACC_STRICT_INVOKE_W_NO = $(ACC) -w
-ACC_STRICT_INVOKE_W_YES = $(ACC)
-HPACC_ANSI_INVOKE_W_NO = $(HPACC) -w 
-HPACC_ANSI_INVOKE_W_YES = $(HPACC)
-HPCC_TRAD_INVOKE_W_NO = $(HPCC) -w
-HPCC_TRAD_INVOKE_W_YES = $(HPCC)
-HPACC_STRICT_INVOKE_W_NO = $(HPACC) -w
-HPACC_STRICT_INVOKE_W_YES = $(HPACC)
-
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
-CCC_LD_FLAGS =
-CCC_LD_LIBS = 
-CCC_TEMPL_INST_FLAG =
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-# Static Build options
-ACC_SFLAGS_YES= -Wl,-a,archive
-ACC_SFLAGS_NO=
-CC_SFLAGS_YES= -Wl,-a,archive
-CC_SFLAGS_NO=
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-SPECIAL_LDFLAGS = 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
-UNIX_LDLIBS = -lm
- 
-ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
-	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-ARFLAGS = rv
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-DEPENDS_RULE.c = @echo no DEPENDS_RULE.c defined in CONFIG.hp700
-DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.hp700
-

config/CONFIG.mv162lc

@@ -1,16 +0,0 @@
-
-# $Id$
-#
-# This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-BUILD_TYPE = Vx
-
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = 68k
-
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
- 
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68040 -msoft-float -DCPU_FAMILY=MC680X0

config/CONFIG.niCpu030

@@ -1,16 +0,0 @@
-
-# BUILD_TYPE
-#   Currently either Vx or Unix
-BUILD_TYPE = Vx
-
-# For Vx directories of form:
-#
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-#
-ARCH_CLASS = 68k
-
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
-
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -DCPU=MC68030 -m68030 -DCPU_FAMILY=MC680X0
- 

config/CONFIG.pc486

@@ -1,33 +0,0 @@
-<<<<<<< CONFIG.pc486
-#
-# no longer required
-#
-#SHELL=knts
-=======
->>>>>>> 1.3
-
-# BUILD_TYPE
-#   Currently either Vx or Unix
-BUILD_TYPE = Vx
-
-# For Vx directories of form:
-#
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-#
-# And configuration files:
-#
-#   CONFIG_SITE.Vx.68k  -or-  CONFIG_SITE.Unix.sun4
-#
-ARCH_CLASS = pc486
-
-include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
-
-# Architecture specific build flags
-# Defines:
-#	CPU, CPU_FAMILY is used by VxWorks header files,
-#	_X86_ is used in base/src/ca
-#
-#	-g is for debugging information, I didn't know where elso to put it
-#
-ARCH_DEP_CFLAGS = -DCPU=I80486 -m486 -DCPU_FAMILY=I80x86 -D_X86_ -g
- 

config/CONFIG.sgi

@@ -1,138 +0,0 @@
-#
-# $Id$
-#
-#  This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-#   Currently either Vx or Host
-BUILD_TYPE = Host
- 
-ARCH_CLASS = sgi
-
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-GCC = cc
-ACC = cc
-
-AR = ar 
-ARCMD = $(AR) $(ARFLAGS)
-ARFLAGS = r
-
-RANLIB =
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = g++
-CCC = CC
-
-CP=cp
-MV = mv
-RM=rm -f
-RMDIR = rm -rf
-MKDIR = mkdir
-CHMOD = "/bin/chmod"
-WHAT = what
-
-EXE=
-OBJ=.o
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -xansi -w
-ACC_ANSI_INVOKE_W_YES = $(ACC) -xansi
-ACC_STRICT_INVOKE_W_NO = $(ACC) -xansi -w
-ACC_STRICT_INVOKE_W_YES = $(ACC) -xansi
-ACC_TRAD_INVOKE_W_NO = $(ACC) -cckr -Xs -w
-ACC_TRAD_INVOKE_W_YES = $(ACC) -cckr -Xs
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
- 
-C_OLD = $(KRCC_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
-CCC_LD_FLAGS =
-CCC_LD_LIBS = 
-CCC_TEMPL_INST_FLAG =
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-
-# Static Build options
-ACC_SFLAGS_YES= -Bstatic
-ACC_SFLAGS_NO=
-CC_SFLAGS_YES= -Bstatic
-CC_SFLAGS_NO=
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
-UNIX_LDLIBS = -lm
- 
-ARCH_DEP_CFLAGS = -DSGI
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS) 
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
-	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
-DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.sgi

config/CONFIG.solaris

@@ -1,168 +0,0 @@
-#
-# $Id$
-#
-#  This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-#   Currently either Vx or Host
-BUILD_TYPE = Host
-
-ARCH_CLASS = solaris
- 
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-GCC = /opt/gnu/bin/gcc 
-ACC = $(SPARCWORKS)/bin/cc
-# SUNCC doesn't exist under Solaris
-
-#
-# required by sun's C++ compiler
-#
-AR = ar
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR)
-CCC_AR = $(CCC) -xar -o
-ARCMD = $($(CPLUSPLUS)_AR)
-
-RANLIB =
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = /opt/gnu/bin/g++
-CCC = /opt/SUNWspro/bin/CC
-
-CP=cp
-MV=mv
-RM=rm -f
-MKDIR=mkdir
-RMDIR=rm -rf
-CHMOD = "/bin/chmod"
-WHAT = what
-
-EXE=
-OBJ=.o
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
-ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
-ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc -v
-ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
-ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
-ACC_LD_FLAGS = 
-ACC_LD_LIBS =
-SUNCC_TRAD_INVOKE_W_NO = $(ACC_TRAD_INVOKE_W_NO)
-SUNCC_TRAD_INVOKE_W_YES = $(ACC_TRAD_INVOKE_W_YES)
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
-GCC_LD_LIBS = 
-GCC_LD_FLAGS =
-
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
-LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
-LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
-CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
-LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
-LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
-LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
-CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w
-CCC_LD_FLAGS = -L$(SPECIAL_LANG)
-CCC_LD_LIBS =
-CCC_TEMPL_INST_FLAG =
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-# Static Build options
-#ACC_SFLAGS_YES= -dn
-ACC_SFLAGS_YES= -Bstatic
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
-ACC_SLIBS_NO=
-ACC_SFLAGS_NO=
-CC_SFLAGS_YES= -dn
-CC_SFLAGS_NO=
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-SL_OLD = $($(STANDARD)_SLIBS_$(STATIC_BUILD))
-SL_ANSI = $($(ANSI)_SLIBS_$(STATIC_BUILD))
-SL_STRICT = $(SL_ANSI)
-UNIX_SLIBS = $(SL_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
-UNIX_LDLIBS = $(UNIX_SLIBS) -lm $(CCOMPILER_LDLIBS)
- 
-# Architecture specific build flags
-ARCH_DEP_CFLAGS = -DSOLARIS 
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-ARCH_DEP_LDLIBS = -lsocket -lnsl
-# -lsocket     needed by libca.a
-# -lnsl        needed by libca.a 
- 
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
-	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override SUN defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -xM $(SRCS.c) > .DEPENDS
-DEPENDS_RULE.cc = -$(COMPILE.cc) -xM $(SRCS.cc) >> .DEPENDS

config/CONFIG.sun4

@@ -1,167 +0,0 @@
-#
-# $Id$
-#
-#  This file is maintained by the EPICS community.
-
-# BUILD_TYPE
-#   Currently either Vx or Host
-
-BUILD_TYPE = Host
-
-ARCH_CLASS=sun4
- 
-# Compiler and utility invocation (supply path to compiler here)
-#   (with warning flags built in)
-#  Paths to compilers
-GCC = gcc 
-ACC = /usr/lang/acc
-SUNCC = cc
-RANLIB = ranlib
-RANLIBFLAGS = -t
-YACC = $(EYACC)
-LEX = $(ELEX)
-G++ = g++
-CCC = /usr/lang/CC
-
-RMDIR = rm -rf
-MKDIR = mkdir
-CHMOD = "/bin/chmod"
-CP=cp
-MV=mv
-RM=rm -f
-WHAT = what
-
-EXE=
-OBJ=.o
-
-#
-# original before use of sun C++
-#
-
-#
-# required by sun's C++ compiler
-#
-ARFLAGS = r
-AR = ar
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR) 
-CCC_AR = $(CCC) -xar -o 
-ARCMD = $($(CPLUSPLUS)_AR)
-
-ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
-ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
-ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
-ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
-ACC_STRICT_INVOKE_W_NO = $(ACC) -Xc -w
-ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc -vc
-ACC_LD_FLAGS = -L$(SPECIAL_LANG)
-ACC_LD_LIBS = 
-SUNCC_TRAD_INVOKE_W_NO = $(SUNCC) -w
-SUNCC_TRAD_INVOKE_W_YES = $(SUNCC)
-GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w -D__USE_FIXED_PROTOTYPES__
-GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi -D__USE_FIXED_PROTOTYPES__
-GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic -D__USE_FIXED_PROTOTYPES__
-GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic -D__USE_FIXED_PROTOTYPES__
-GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
-GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
-GCC_LD_LIBS = -liberty
-GCC_LD_FLAGS = 
- 
-C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
-C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
-C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
-CC = $(C_$(CMPLR))
-
-LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
-LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
-LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
-CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
-LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
-LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
-LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
-CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
-
-CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
-CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
-CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
-CCC_LD_FLAGS = -L$(SPECIAL_LANG)
-CCC_LD_LIBS = 
-CCC_TEMPL_INST_FLAG =  
-G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
-G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
-G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
-      -Wmissing-prototypes -Woverloaded-virtual \
-      -Wwrite-strings -Wconversion -Wstrict-prototypes\
-      -Wpointer-arith -Winline
-G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
-
-CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
-CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
-TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
-
-# GNU make likes CXX instead of CCC
-CXX = $(CXX_$(CXXCMPLR))
-
-# Static Build options
-ACC_SFLAGS_YES= -Bstatic
-ACC_SFLAGS_NO=
-CC_SFLAGS_YES= -Bstatic
-CC_SFLAGS_NO=
-GCC_SFLAGS_YES= -static
-GCC_SFLAGS_NO=
-
-SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
-SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
-SF_STRICT = $(SF_ANSI)
-UNIX_SFLAGS = $(SF_$(CMPLR))
- 
-# Optimization
-OPTIM_YES = -O
-OPTIM_NO =
-UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
-
-# Include files
-UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
-                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
- 
-# Operating system flags
-OP_SYS_FLAGS = -DUNIX
- 
-
-UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
-
-UNIX_LDLIBS = -lm $(CCOMPILER_LDLIBS)
-
-ARCH_DEP_CFLAGS = -DSUNOS4
-ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
-UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
- 
-UNIX_CXXFLAGS = $(UNIX_CFLAGS)
- 
-# Target specific flags
-TARGET_CFLAGS = $($(basename $@)_CFLAGS)
-TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
-TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
-TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
-TARGET_LDLIBS = $($(basename $@)_LDLIBS)
-TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
-
-CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
-CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) \
-	$(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
-
-LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
-LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
- 
-# Override SUN defaults
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-
-# changed from 'Unix' makesystem:
-# link command now contains the output flag '-o $@'
-LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
-LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
-
-DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
-DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.sun4

config/CONFIG_BASE

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -12,6 +21,7 @@ DIRS = tools
 DIRS += include 
 DIRS += cxxTemplates 
 DIRS += toolsComm
+DIRS += makeBaseApp 
 DIRS += libCom 
 DIRS += libvxWorks
 DIRS += cvtDctsdr 
@@ -42,14 +52,9 @@ EPICS_BASE = $(TOP)
 # EPICS include config file
 include $(EPICS_BASE)/config/CONFIG
 
+ifdef INSTALL_LOCATION_BASE
+INSTALL_LOCATION = $(INSTALL_LOCATION_BASE)
+endif
+
 EPICS_BASE = $(INSTALL_LOCATION)
 
-#
-# this speeds up the build by turning off implicit rules search
-#
-.PHONY:: $(EPICS_BASE)/config/CONFIG
-.PHONY:: $(EPICS_BASE)/config/CONFIG.* $(EPICS_BASE)/config/CONFIG_* 
-.PHONY:: $(EPICS_BASE)/config/RULES.* $(EPICS_BASE)/config/RULES_* .DEPENDS
-.PHONY:: $(HOME)/.EPICS_CONFIG $(HOME)/.EPICS_CONFIG.$(HOST_ARCH)
-.PHONY:: ../Makefile.Vx ../Makefile.Unix ../Makefile.Host Makefile
-

config/CONFIG_BASE_VERSION

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -9,11 +18,14 @@
 
 EPICS_VERSION=3
 EPICS_REVISION=13
-EPICS_MODIFICATION=0
-EPICS_UPDATE_NAME=beta
-EPICS_UPDATE_LEVEL=10
+EPICS_MODIFICATION=10
+EPICS_UPDATE_NAME=
+EPICS_UPDATE_LEVEL=0
 
-EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}"
+EPICS_LOCAL_NAME=B
+EPICS_LOCAL_VERSION=0
+
+EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}.$(EPICS_LOCAL_NAME)$(EPICS_LOCAL_VERSION)"
 
 CVS_DATE="\$$Date$$"
 

config/CONFIG_COMMON

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -11,55 +20,57 @@
 
 # CROSS1 will be defined only when CROSS_COMPILER_HOST_ARCHS is NOT defined
 CROSS1 = $(CROSS_COMPILER_TARGET_ARCHS$(word 1,$(CROSS_COMPILER_HOST_ARCHS)))
- 
+
 # CROSS2 will be defined only when CROSS_COMPILER_HOST_ARCHS is defined
 # and HOST_ARCH is one of it's words  
 CROSS2 = $(CROSS_COMPILER_TARGET_ARCHS$(filter-out 1,$(words $(filter $(HOST_ARCH),$(CROSS_COMPILER_HOST_ARCHS)))))
- 
+
 BUILD_ARCHS = $(HOST_ARCH) $(CROSS1) $(CROSS2)
- 
+
 INSTALL_LOCATION = $(TOP)
- 
+
 INSTALL_LOCATION_LIB        = $(INSTALL_LOCATION)/lib
 INSTALL_LOCATION_BIN        = $(INSTALL_LOCATION)/bin
 
 INSTALL_INCLUDE             = $(INSTALL_LOCATION)/include
 INSTALL_DOC                 = $(INSTALL_LOCATION)/doc
+INSTALL_HTML                = $(INSTALL_LOCATION)/html
 INSTALL_MAN                 = $(INSTALL_LOCATION)/man
 INSTALL_TEMPLATES           = $(INSTALL_LOCATION)/templates
 INSTALL_DBD                 = $(INSTALL_LOCATION)/dbd
 INSTALL_CONFIG              = $(INSTALL_LOCATION)/config
+INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
 
 EPICS_BASE_INCLUDE      = $(EPICS_BASE)/include
-EPICS_BASE_DBD          = $(EPICS_BASE)/dbd
-
-EPICS_EXTENSIONS_INCLUDE      = $(EPICS_EXTENSIONS)/include
-EPICS_EXTENSIONS_TEMPLATES    = $(EPICS_EXTENSIONS)/templates
 
 DIVIDER = .
+OBJ = .
+RES = .
+
+EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(HOST_ARCH)
+EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(HOST_ARCH)
+INSTALL_HOST_LIB = $(INSTALL_LOCATION)/lib/$(HOST_ARCH)
+
 
 # private versions of lex/yacc from EPICS
-EYACC = $(EPICS_BASE)/bin/$(HOST_ARCH)/antelope$(EXE)
-ELEX = $(EPICS_BASE)/bin/$(HOST_ARCH)/e_flex$(EXE) -S$(EPICS_BASE_INCLUDE)/flex.skel.static
+EYACC = $(EPICS_BASE_HOST_BIN)/antelope$(EXE)
+ELEX = $(EPICS_BASE_HOST_BIN)/e_flex$(EXE) -S$(EPICS_BASE_INCLUDE)/flex.skel.static
+YACC  = $(EYACC)
+LEX   = $(ELEX)
 
 # Default for perl if it's on the PATH,
-# otherwise override this in e.g. CONFIG_SITE
+# otherwise override this in CONFIG_SITE_HOST_ARCH.<host_arch>
 PERL=perl
 
 # install from EPICS
-INSTALL = $(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/installEpics.pl
+INSTALL = $(PERL) $(EPICS_BASE_HOST_BIN)/installEpics.pl
 INSTALL_PRODUCT = $(INSTALL)
+INSTALL_LIBRARY = $(INSTALL)
 
 # dbtools from EPICS
 
 # state notation language compiler (installed from base/src/sequencer)
-SNC = $(EPICS_BASE)/bin/$(HOST_ARCH)/snc
-
-# vxWorks definitions
-VX_CONFIG_DIR = $(VX_DIR)/config
-VX_INCLUDE = $(VX_DIR)/h
-VX_GNU_BIN = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-VX_GNU_LIB = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
+SNC = $(EPICS_BASE_HOST_BIN)/snc$(EXE)
 
 ifdef T_A
 
@@ -70,15 +81,167 @@ INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 EPICS_BASE_LIB          = $(EPICS_BASE)/lib/$(T_A)
 EPICS_BASE_BIN          = $(EPICS_BASE)/bin/$(T_A)
 
-EPICS_EXTENSIONS_LIB          = $(EPICS_EXTENSIONS)/lib/$(T_A)
-EPICS_EXTENSIONS_BIN          = $(EPICS_EXTENSIONS)/bin/$(T_A)
+#--------------------------------------------------
+# GNU compiler defaults
 
-VX_IMAGE = $(VX_CONFIG_DIR)/$(T_A)/vxWorks
-VX_IMAGE_SYM = $(VX_CONFIG_DIR)/$(T_A)/vxWorks.sym
+GCC_ANSI = $(GCC) -ansi
+GCC_STRICT = $(GCC) -ansi -pedantic
+GCC_TRAD = $(GCC) -traditional
+GCC_DEP_CFLAGS = -fPIC -D_REENTRANT
+GCC_WARN_YES = -Wall
+GCC_WARN_NO = -w
+GCC_OPT_YES = -O
+GCC_OPT_NO = -g
+GCC_SFLAGS_YES = -static
+GCC_SFLAGS_NO =
+GCC_SLIBS_YES =
+GCC_SLIBS_NO =
+GCC_SHRLIB_CFLAGS_YES =
+GCC_SHRLIB_LDFLAGS_YES =  -shared
 
-# location of installed vxWorks image
-EPICS_VX_IMAGE = $(EPICS_BASE_BIN)/vxWorks
-EPICS_VX_IMAGE_SYM = $(EPICS_BASE_BIN)/vxWorks.sym
+G++_NORMAL = $(G++) -ansi -pedantic
+G++_STRICT = $(G++) -ansi -pedantic -Wtraditional
+G++_TRAD = $(G++) -traditional
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+G++_DEP_CFLAGS = -fPIC -D_REENTRANT
+G++_WARN_YES = -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_WARN_NO = -w
+G++_OPT_YES = -O
+G++_OPT_NO = -g
+G++_SFLAGS_YES = -static
+G++_SFLAGS_NO =
+G++_SLIBS_YES =
+G++_SLIBS_NO =
+G++_DEPENDS_FLAG = -MM
+G++_SHRLIB_CFLAGS_YES =
+G++_SHRLIB_LDFLAGS_YES =  -shared
+
+#--------------------------------------------------
+# C compiler
+
+CC = $($(ANSI)_$(CMPLR))
+
+#---------------------------------------------------------------
+# Vendor compiler dependent options
+VENDOR_DEP_CFLAGS = $($(ANSI)_DEP_CFLAGS)
+VENDOR_DEP_CXXFLAGS = $($(CPLUSPLUS)_DEP_CFLAGS)
+
+#--------------------------------------------------
+# C++ compiler
+
+CXX = $($(CPLUSPLUS)_$(CXXCMPLR))
+
+#---------------------------------------------------------------
+# Architecture dependent options (solaris,sun4,mv167,...)
+ARCH_DEP_CFLAGS =
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+ARCH_DEP_LDFLAGS =
+ARCH_DEP_LDLIBS =
+
+#---------------------------------------------------------------
+# Operating system dependent options (Unix,Vx,WIN32...)
+OP_SYS_CFLAGS =
+OP_SYS_LDFLAGS =
+OP_SYS_INCLUDES =
+OP_SYS_LDLIBS =
+
+#--------------------------------------------------
+# SOURCE* used by WIN32 only
+SOURCE_CFLAG =
+SOURCE_CXXCFLAG =
+
+#--------------------------------------------------
+# Makefile specific options
+USR_INCLUDES =
+USR_CFLAGS =
+USR_CXXFLAGS =
+USR_LDFLAGS =
+USR_LDLIBS =
+USR_CPPFLAGS =
+USR_DBDFLAGS =
+
+#--------------------------------------------------
+# Target specific options
+TARGET_INCLUDES = $($(basename $@)_INCLUDES)
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+#--------------------------------------------------
+# Depends flag
+DEPENDS_FLAG = $($(CPLUSPLUS)_DEPENDS_FLAG)
+
+#--------------------------------------------------
+# C++ template flag option
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+#--------------------------------------------------
+# Epics includes (CONFIG.Vx will override OS_CLASS)
+OS_CLASS = $(ARCH_CLASS)
+EPICS_INCLUDES = -I$(INSTALL_INCLUDE) -I$(INSTALL_INCLUDE)/os/$(OS_CLASS)
+EPICS_DBDFLAGS = -I $(INSTALL_LOCATION)/dbd
+
+#--------------------------------------------------
+# Warnings flags  (CONFIG.Vx will override)
+WARN_CFLAGS = $($(ANSI)_WARN_$(HOST_WARN))
+WARN_CXXFLAGS = $($(CPLUSPLUS)_WARN_$(HOST_WARN))
+
+#--------------------------------------------------
+# Optimization flags  (CONFIG.Vx will override)
+OPT_CFLAGS = $($(ANSI)_OPT_$(HOST_OPT))
+OPT_CXXFLAGS = $($(CPLUSPLUS)_OPT_$(HOST_OPT))
+OPT_LDFLAGS =
+
+#--------------------------------------------------
+# Static build options
+STATIC_CFLAGS = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+STATIC_CXXCFLAGS = $($(CPLUSPLUS)_SFLAGS_$(STATIC_BUILD))
+STATIC_LDFLAGS = $($(ANSI)_SLDFLAGS_$(STATIC_BUILD))
+STATIC_LDLIBS = $($(ANSI)_SLIBS_$(STATIC_BUILD))
+
+#--------------------------------------------------
+# ar definition default
+ARCMD = $(AR) $(ARFLAGS) $@
+
+#--------------------------------------------------
+# depends definition 
+DEPENDS_RULE = -$(COMPILE.cc) $(DEPENDS_FLAG) $^ > DEPENDS
+
+#--------------------------------------------------
+
+# Include files
+
+INCLUDES = -I. -I.. $(USR_INCLUDES) $(EPICS_INCLUDES) $(TARGET_INCLUDES) $(OP_SYS_INCLUDES)
+
+CFLAGS = $(OPT_CFLAGS) $(DEBUG_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS)\
+ $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(VENDOR_DEP_CFLAGS) $(STATIC_CFLAGS)\
+ $(OP_SYS_CFLAGS) $(INCLUDES)
+
+CXXFLAGS = $(OPT_CXXFLAGS) $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)\
+ $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(VENDOR_DEP_CXXFLAGS) $(STATIC_CXXCFLAGS)\
+ $(OP_SYS_CFLAGS) $(TEMPL_INST_CXXFLAG) $(INCLUDES)
+
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS)\
+ $(ARCH_DEP_LDFLAGS) $(STATIC_LDFLAGS) $(OP_SYS_LDFLAGS)
+
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS)\
+ $(STATIC_LDLIBS) $(OP_SYS_LDLIBS)
+
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)
+
+CPPSNCFLAGS = $(INCLUDES)
+
+DBDFLAGS = -I . -I .. $(USR_DBDFLAGS) $(EPICS_DBDFLAGS)
+
+# Build compile line here
+COMPILE.c = $(CC) $(CPPFLAGS) $(CFLAGS) -c $(SOURCE_FLAG)
+COMPILE.cc = $(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(SOURCE_CXXFLAG)
 
 endif
 

config/CONFIG_ENV

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	$Id$
 #	Author:	Andrew Johnson
 #	Date:	20 April 1995
@@ -20,13 +29,18 @@
 #  Default environment settings
 
 # Channel Access:
-# EPICS_CA_ADDR_LIST augment beacon/search dest ip addr list
+# EPICS_CA_ADDR_LIST 
+#	Augment beacon/search dest ip addr list
 #	from white space separated ip addresses in this
 #	environment variable. "Quote" if more than one addr.
-# EPICS_CA_AUTO_ADDR_LIST YES = augment beacon/search dest ip
+# EPICS_CA_AUTO_ADDR_LIST 
+#	YES = augment beacon/search dest ip
 #	addr list from network interfaces found; NO = only use
 #	EPICS_CA_ADDR_LIST to create this list.
-# EPICS_CA_CONN_TMO sec before sending echo request from client.
+# EPICS_CA_CONN_TMO 
+#	after not seeing a server beacon for this number
+#	of seconds the clients will send an echo request over
+#	tcp/ip to verify the connection.
 # EPICS_CA_REPEATER_PORT CA repeater port number.
 # EPICS_CA_SERVER_PORT CA server port number.
 
@@ -39,23 +53,73 @@ EPICS_CA_SERVER_PORT=5064
 #
 # These parameters are only used by the CA server library
 #
-# EPICS_CA_BEACON_PERIOD quiescent sec between server beacons.
+# EPICS_CA_BEACON_PERIOD 
+#	quiescent sec between server beacons.
 # EPICS_CAS_INTF_ADDR_LIST - list of IP addresses identifying
-#	a limited set of interfaces that the server should bind to.
-#	If this parameter is empty then connections are accepted
-#	from any interface. Beacons are sent only to the broadcast
-#	address of each interface in this list (or the destination 
-#	address of point to point interfaces) if EPICS_CA_AUTO_ADDR_LIST
-#	is YES. Type "ifconfig -a" in order to determine which 
-# 	interfaces are available.
+#	a limited set of network interfaces for server communication. 
+#	Specifically, this parameter specifies the interfaces from
+#	which the server will accept TCP/IP connections. It also 
+#	specifies that UDP search messages addressed to both
+#	the IP addresses in EPICS_CAS_INTF_ADDR_LIST and also
+#	the broadcast addresses (or the destination addresses of 
+#	point to point interfaces) of the corresponding interfaces
+#	will be accepted by the server. If this parameter is empty 
+#	then TCP/IP connections are accepted from any interface
+#	(and any search messages addressed to the host are accepted). 
+#	Beacons are sent only to the broadcast address of each interface 
+#	in this list (or the destination address of point to point 
+#	interfaces) if EPICS_CA_AUTO_ADDR_LIST is YES. 
+#	Type "ifconfig -a" in order to determine which interfaces 
+#	are available.
 # EPICS_CAS_BEACON_ADDR_LIST - If this parameter is specified
 #	or if EPICS_CAS_INTF_ADDR_LIST isnt empty then this parameter
 #	is used instead of EPICS_CA_ADDR_LIST by the server library 
 # 	to augment the list of addresses to send beacons to.
 # EPICS_CAS_SERVER_PORT - If this parameter is specified then it
 #	and not EPICS_CA_SERVER_PORT is used to determine the server's
-# 	port number.
+# 	port number. It is possible to have multiple servers on the
+#	same host on the same EPICS_CAS_SERVER_PORT port if the IP
+#	kernel is modern (if it has multicast enhancements). In this
+#	situation all servers will share the same user specified 
+#	UDP port number and will be assigned unique TCP port numbers. 
+#	The fact that the servers may not be using the user specified
+#	port number for TCP will be completely transparent to EPICS 
+#	3.13 or higher clients that will be locating the servers
+#	using the user specified UDP port number, but will be connecting to
+#	the servers using whatever TCP port has been assigned.
 #
+#   If experiencing trouble getting clients to connect
+#	--------------------------------------------------
+#
+#	o Make sure that the broadcast addresses are identical on the
+#	server's host and on the client's host. This can be checked with
+#	"netstat -i" or "ifconfig -a".
+#	
+#	o Make sure that the client and server are using the same UDP
+#	port. Check the server's port by running "netstat -a | grep nnn"
+#	where nnn is the port number involved. If you do not set 
+#	EPICS_CA_SERVER_PORT or EPICS_CAS_SERVER_PORT 
+#	then the default port will be 5064.
+#	
+#	o Two servers can run on the same host with the same server port number
+#	if the following restrictions are understood (good luck). If the host has a
+#	modern IP kernel it is possible to have two servers on the same UDP port.
+#	It is not possible for two servers to run on the same host using the same 
+#	TCP IP server port. If the CA server library detects that a 2nd server is attempting
+#	to start on the same port as an existing CA server then both servers will use the 
+#	same UDP port if it is a modern IP kernel, and the 2nd server will
+#	be allocated a new TCP port. In this situation the clients will still be
+#	configured to use the same port number for both servers. The clients
+#	will find the 2nd server via the shared UDP port, and transparently
+#	connect to the 2nd server's allocated TCP port. Be aware that If there are 
+#	two server's running on the same host on the same UDP port then they will 
+#	both receive all UDP search requests sent as broadcasts, but will unfortunately (due to 
+#	what I consider to be a real weakness of most IP kernel implementations) only one 
+#	of the servers will typically receive UDP search requests sent to unicast addresses (i.e. 
+#	a specific host's ip address). 
+#
+
+
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_BEACON_ADDR_LIST=""
@@ -65,9 +129,6 @@ EPICS_CAS_SERVER_PORT=
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004
-#EPICS_IOC_LOG_INET=""
-#EPICS_IOC_LOG_FILE_LIMIT=100000
-#EPICS_IOC_LOG_FILE_NAME=/a/b/c/d/iocs.log
 
 # Other services:
 

config/CONFIG_HOST_ARCH.Borland

@@ -0,0 +1,22 @@
+#  CONFIG_HOST_ARCH.Borland
+#
+
+EXE=.exe
+
+CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
+MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
+RM   =$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -f
+MKDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/mkdir.pl
+RMDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -rf
+FN   =$(PERL) $(EPICS_BASE_HOST_BIN)/fullName.pl
+CHMOD=echo
+ECHO=echo
+
+WIND_HOST_TYPE = x86-win32
+ 
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
+HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
+

config/CONFIG_HOST_ARCH.Linux

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.Linux
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = x86-linux
+

config/CONFIG_HOST_ARCH.UnixCommon

@@ -0,0 +1,20 @@
+
+#  CONFIG_HOST_ARCH.UnixCommon
+#
+
+# Unix command definitions
+CP = cp
+MV = mv
+RM = rm -f
+MKDIR = mkdir
+RMDIR = rm -rf
+CHMOD = "/bin/chmod"
+
+# Set LD_LIBRARY_PATH for shared library builds
+ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
+export LD_LIBRARY_PATH := $(INSTALL_HOST_LIB):$(EPICS_BASE_HOST_LIB):$(LD_LIBRARY_PATH)
+else
+export LD_LIBRARY_PATH := $(EPICS_BASE_HOST_LIB):$(LD_LIBRARY_PATH)
+endif
+
+

config/CONFIG_HOST_ARCH.WIN32

@@ -0,0 +1,21 @@
+#  CONFIG_HOST_ARCH.WIN32
+#
+
+EXE=.exe
+
+CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
+MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
+RM   =$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -f
+MKDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/mkdir.pl
+RMDIR=$(PERL) $(EPICS_BASE_HOST_BIN)/rm.pl -rf
+CHMOD=echo
+ECHO=echo
+
+WIND_HOST_TYPE = x86-win32
+ 
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
+HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
+

config/CONFIG_HOST_ARCH.alpha

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.alpha
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = alpha
+

config/CONFIG_HOST_ARCH.cygwin32

@@ -0,0 +1,13 @@
+# CONFIG_HOST_ARCH.cygwin32
+#
+# This file is maintained by the EPICS community.
+
+# Include definitions common to all Unix archs
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+EXE=.exe
+
+TORNADO=YES
+
+WIND_HOST_TYPE = x86-win32
+

config/CONFIG_HOST_ARCH.hp700

@@ -0,0 +1,8 @@
+#  CONFIG_HOST_ARCH.hp700
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = parisc-hpux10

config/CONFIG_HOST_ARCH.sgi

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.sgi
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = sgi
+

config/CONFIG_HOST_ARCH.solaris

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.solaris
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = sun4-solaris2
+

config/CONFIG_HOST_ARCH.solaris-x86

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.solaris-x86
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = x86-solaris2
+

config/CONFIG_HOST_ARCH.solarisGnu

@@ -0,0 +1,9 @@
+#  CONFIG_HOST_ARCH.solarisGnu
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE = sun4-solaris2
+

config/CONFIG_HOST_ARCH.sun4

@@ -0,0 +1,14 @@
+#  CONFIG_HOST_ARCH.sun4
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
+
+WIND_HOST_TYPE =  sun4-sunos4
+
+##########################
+# added temporarily because gdd will not compile - 2/18/98
+CPLUSPLUS =
+##########################
+

config/CONFIG_SITE

@@ -13,13 +13,17 @@
 #	i.e.: the arch running DCT/getrel/etc.
 #
 #  Currently Supporting:
-#	sun4
-#	hp700
-#	alpha
-#	solaris
-#	sgi
+#	Borland
 #	Linux
 #	WIN32
+#	alpha
+#	cygwin32
+#	hp700
+#	sgi
+#	solaris
+#	solarisGnu  (GNU compiler)
+#	solaris-x86
+#	sun4
 #
 #  HOST_ARCH now an environment variable
 #  HOST_ARCH=$(shell /usr/local/epics/startup/HostArch)
@@ -30,15 +34,28 @@ endif
 #  The architectures to build EPICS for
 #
 #  Currently Supporting:
-#       mv167
+#       frc40
+#       frc5ce
+#       hkbaja47
+#       hkv2f
+#       mv147
+#       mv1604
 #       mv162
 #       mv162lc
-#       mv147
-#       hkv2f
-#	niCpu030
-#	pc486
+#       mv167
+#       mv177
+#       mv2700
+#       niCpu030
+#       pc486
+#       ppc603
+#       ppc604
+#       ppc603_long (over 32MB)
+#       ppc604_long (over 32MB)
+#       sbs_pc6
+#       vxipc
 #
-CROSS_COMPILER_TARGET_ARCHS=mv167
+CROSS_COMPILER_TARGET_ARCHS=
+
 
 #  If only a subset of the host architectures perform
 #  the build for the CROSS_COMPILER_TARGET_ARCHS 
@@ -46,52 +63,81 @@ CROSS_COMPILER_TARGET_ARCHS=mv167
 #
 #CROSS_COMPILER_HOST_ARCHS=sun4
 
-#  VxWorks directory
-#VX_DIR=$(VW)
-#VX_DIR=/usr/local/vw/vxV51.mm
-#VX_DIR=/usr/local/vw/vxV52/vw
-VX_DIR=/usr/local/vw/vxV52p1/vw
+#  Vx release Tornado?
+#        must be either YES or NO
+TORNADO=YES
+#TORNADO=NO
+ 
+#  VxWorks directory for TORNADO=YES
+#VX_DIR_YES=c:\\Tornado
+VX_DIR_YES = /usr/local/vw/tornado202p1
 
-#  Gnu directory for gcc
-#VX_GNU = $(VX_GNU)
-VX_GNU = $(VX_DIR)/../vxgccV2.2.3.1
 
-#  Gnu directory for g++
+#  VxWorks directory for TORNADO=NO
+#VX_DIR_NO=$(VW)
+#VX_DIR_NO=/usr/local/vw/vxV51.mm
+#VX_DIR_NO=/usr/local/vw/vxV52/vw
+#VX_DIR_NO=c:/Tornado/target
+VX_DIR_NO=/usr/local/vw/vxV52p1/vw
+ 
+#  Directory for TORNADO=NO gnu gcc crosscompiler
+VX_GNU_NO = $(VX_DIR_NO)/../vxgccV2.2.3.1
+
+#  Directory for TORNADO=NO gnu g++ crosscompiler
+#  used by applications for hideos builds only
 #GNU_DIR = $(LOCAL_GNU)
 GNU_DIR = /usr/local/hideos/gnu_install-2.7.2
-GNU_BIN = $(GNU_DIR)/bin
-GNU_LIB = $(GNU_DIR)/lib
 
-#  Client ANSI Compiler
-#   GCC     (gcc -ansi)
-#   ACC     (acc)
-#   HPACC   (cc -Aa)
-#ANSI=HPACC
+#  Client ANSI C Compiler (for Host builds)
+#   GCC     (gcc -ansi) GNU
+#   ACC     (acc)       OS VENDOR
+#   HPACC   (cc -Aa)    OTHER VENDOR 
 ANSI=ACC
  
-#  Client Standard C Compiler choice
-#   GCC     (gcc -traditional)
-#   ACC     (acc -Xs)
-#   SUNCC   (cc)
-#   HPCC    (cc -Ac)
-#STANDARD=HPCC
-STANDARD=ACC
- 
-#  C++ Compiler 
+#  C++ Compiler (for Host builds)
 #   G++     (g++)   GNU C++
 #   CCC     (CC)    OS VENDOR C++
-#CPLUSPLUS=G++
 #Note: if CPLUSPLUS is empty then C++ src codes are not built
 #CPLUSPLUS=	# use this if site does not have C++ compiler
 CPLUSPLUS=CCC
 
+# Default ANSI level, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=STRICT
+
+# Default C++ compiler ANSI level
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+#   Individual Makefiles may override
+CXXCMPLR=STRICT
+
+#  Build should install all include files first?
+#	must be either YES or NO
+MAKE_INC_TARGET_FIRST=NO
+
+#  Build shared libraries?
+#  (archive libraries will also be built)
+#        must be either YES or NO
+#     NOTE: CONFIG_SITE.Host.$(HOST_ARCH) files may override
+#
+#     NOTE WIN32: YES results in a DLL. CONFIG_SITE.Host.WIN32
+#                 distribution file contains YES override
+#
+#     NOTE solaris,Linux, and sun4: If YES then LD_LIBRARY_PATH must
+#     include fullpathname $(INSTALL_LOCATION)/lib/$(HOST_ARCH)
+#     for both the base build and when invoking base executables
+SHARED_LIBRARIES=NO
+
 #  Build client objects statically ?
 #        must be either YES or NO
 STATIC_BUILD=NO
 
 #  Unix Optimization
 #	must be either YES or NO
-UNIX_OPT=YES
+HOST_OPT=YES
 
 #  VxWorks Optimization
 #	must be either YES or NO
@@ -99,12 +145,15 @@ VX_OPT=YES
  
 #  Generate Verbose Compiler Warnings for Unix
 #	must be either YES or NO
-UNIX_WARN=YES
+HOST_WARN=YES
 
 #  Generate Verbose Compiler Warnings for VxWorks
 #	must be either YES or NO
 VX_WARN=YES
 
+# adl2dl 
+ADL2DL = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/adl2dl
+
 # sch2edif compiler and flags
 SCH2EDIF = sch2edif
 SCH2EDIF_PATH =
@@ -117,3 +166,6 @@ E2DB = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/e2db
 E2DB_SYSFLAGS = -ate -d $(EPICS_EXTENSIONS)/templates/capfast/edb.def
 E2DB_FLAGS =
 
+#dbst 
+DBST = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/dbst
+

config/CONFIG_SITE.Host.Borland

@@ -1,9 +1,10 @@
-
+#
 # $Id$
 #
 # Site Specific Configuration Information
 # Only the local epics system manager should modify this file
+ 
+SHARED_LIBRARIES = YES
 
-# Epics defs
-
+BORLAND=C:\\Borland\\bcc55
 

config/CONFIG_SITE.Host.WIN32

@@ -3,5 +3,6 @@
 #
 # Site Specific Configuration Information
 # Only the local epics system manager should modify this file
-
+ 
+SHARED_LIBRARIES = YES
 

config/CONFIG_SITE.Host.hp700

@@ -0,0 +1,26 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# by default, build and use shared libraries
+SHARED_LIBRARIES=YES
+
+# where we expect to find shared libraries if not found elsewhere
+#DEFAULT_SHRLIB_SEARCH_PATH = /opt/epics/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)/support/base/$(EPICS_VERSION)-$(EPICS_REVISION)-$(EPICS_MODIFICATION)/lib/hp700
+DEFAULT_SHRLIB_SEARCH_PATH = /cs/lib/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION).$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL):$(INSTALL_LIB)
+
+#No special action should be required to build or use shared libraries.
+#However, when a new shared library is built using the above configuration,
+#it should be copied into the location specified by DEFAULT_SHRLIB_SEARCH_PATH
+#which in this specific case is: /cs/lib/R3.13.1.1/
+
+# cal added this so that libraries can be built with position
+# independent code even if shared libraries aren't being built
+ifeq ($(RELOCATABLE), YES)
+    ARCH_DEP_CFLAGS     += +Z
+    ARCH_DEP_CXXFLAGS   += +Z
+endif
+
+

config/CONFIG_SITE.Host.solaris

@@ -1,9 +1,11 @@
-
+#
 # $Id$
 #
 # Site Specific Configuration Information
 # Only the local epics system manager should modify this file
 
-# Epics defs
+# APS overrides of definitions 
 
+#GCC = /opt/gnu/bin/gcc
+#G++ = /opt/gnu/bin/g++
 

config/CONFIG_SITE.Linux

@@ -1,20 +0,0 @@
-#
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Default SUN compiler, individual Makefiles will override
-#  if they cannot support ANSI compilation.
-#   STRICT -  ANSI C - force warning flags
-#   ANSI   -  ANSI C
-#   OLD    -  Standard C - Not appropriate here.
-CMPLR=ANSI
-
-# Default SUN C++ compiler, individual Makefiles will override
-#  if they are coded to a higher standard.
-#   STRICT -  ANSI C++ force strict warning flags
-#   NORMAL -  ANSI C++ optional warning flags
-CXXCMPLR=NORMAL
-#CXXCMPLR=STRICT
-

config/CONFIG_SITE.Vx.68k.cygwin32

@@ -1,29 +0,0 @@
-# $Id$
-#
-# This file is maintained by the EPICS community.
-
-
-#  Site host architecture specific overrides for Vx.68k
-#
-
-ANSI=GCC
-STANDARD=GCC
-CPLUSPLUS=G++
-
-VX_DIR=/vw/vxV52p1/vw
-VX_GNU=/usr/local
-
-VX_GNU_BIN = $(VX_GNU)/bin
-VX_GNU_LIB = $(VX_GNU)/lib
-
-AR=$(VX_GNU_BIN)/m68k-wrs-vxworks-ar.exe
-RANLIB=$(VX_GNU_BIN)/m68k-wrs-vxworks-ranlib.exe
-CC=$(VX_GNU_BIN)/m68k-wrs-vxworks-gcc.exe -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
-G++=$(VX_GNU_BIN)/m68k-wrs-vxworks-g++.exe -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
-CPP=$(VX_GNU_BIN)/m68k-wrs-vxworks-cpp.exe -nostdinc
-LD=$(VX_GNU_BIN)/m68k-wrs-vxworks-ld.exe -r
-
-# Not in cygwin32
-WHAT = echo
-
-

config/CONFIG_SITE.Vx.Linux

@@ -0,0 +1,28 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+# The definitions VX_DIR, VX_GNU, GNU_DIR, GNU_LIB, etc.
+# can be overridden for specific Linux-target architecture
+# combinations by creating a CONFIG_SITE.Vx.Linux.<T_A>
+# file with the override definitions.
+
+## ---- jba overrides for cross compiler
+## VX_DIR needed for "export WIND_BASE = $(VX_DIR)"
+#VX_DIR_YES = /home/phoebus/JBA/gnu
+#VX_GNU_YES = $(VX_DIR)
+#VX_INCLUDE_YES = $(VX_GNU)/$(GNU_TARGET)/include
+#
+#CMPLR_PREFIX=  $(GNU_TARGET)-
+#CMPLR_SUFFIX=
+#GCC    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#AR     = $(GNU_BIN)/$(CMPLR_PREFIX)ar$(CMPLR_SUFFIX)
+#CPP    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc -x c -E
+#RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
+#LD     = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#G++    = $(GNU_BIN)/$(CMPLR_PREFIX)g++$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#LD_G++ = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#NM     = $(GNU_BIN)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)
+## ---- end jba overrides
+
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(HOST_ARCH).$(T_A)

config/CONFIG_SITE.Vx.Linux.mv167

@@ -0,0 +1,14 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+## ---- jba overrides for cross compiler
+#GNU_TARGET=m68k-wrs-vxworks
+## ---- end jba overrides
+
+# ORNL SNS overrides for cross compilers
+#VX_DIR_YES = /opt/tornado20/
+#VX_INCLUDE_YES = /usr/local/crossgcc/m68k/m68k-wrs-vxworks/sys-include
+#VX_GNU_YES = /usr/local/crossgcc/m68k/
+#VX_GNU_BIN_YES = $(VX_GNU)/bin
+#VX_GNU_LIB_YES = /usr/local/crossgcc/m68k/lib/gcc-lib/m68k-wrs-vxworks/2.95.2

config/CONFIG_SITE.Vx.Linux.ppc603

@@ -0,0 +1,10 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+# ORNL SNS overrides for cross compilers
+#VX_DIR_YES = /opt/tornado20/
+#VX_INCLUDE_YES = /usr/local/crossgcc/ppc/powerpc-wrs-vxworks/sys-include
+#VX_GNU_YES = /usr/local/crossgcc/ppc/
+#VX_GNU_BIN_YES = $(VX_GNU)/bin
+#VX_GNU_LIB_YES = /usr/local/crossgcc/ppc/lib/gcc-lib/powerpc-wrs-vxworks/2.95.2

config/CONFIG_SITE.Vx.ppc604

@@ -0,0 +1,3 @@
+
+# APS override of tornado directory for ppc
+#VX_DIR_YES = /usr/local/vw/tornado101ppc2

config/CONFIG_SITE.alpha

@@ -1,21 +0,0 @@
-#
-# CONFIG_SITE.Unix.alpha
-#
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Default compiler, individual Makefiles will override
-#  if they cannot support ANSI compilation.
-#   STRICT -  ANSI C - force warning flags
-#   ANSI   -  ANSI C
-#   OLD    -  Standard C - Not appropriate here.
-CMPLR=ANSI
-
-# Default SUN C++ compiler, individual Makefiles will override
-#  if they are coded to a higher standard.
-#   STRICT -  ANSI C++ force strict warning flags
-#   NORMAL -  ANSI C++ optional warning flags
-CXXCMPLR=NORMAL
-#CXXCMPLR=STRICT
-

config/CONFIG_SITE.cygwin32

@@ -1,21 +0,0 @@
-#
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-
-# Default compiler, individual Makefiles will override
-#  if they cannot support ANSI compilation.
-#   STRICT -  ANSI C - force warning flags
-#   ANSI   -  ANSI C
-#   OLD    -  Standard C - Not appropriate here.
-CMPLR=ANSI
-
-# Default C++ compiler, individual Makefiles will override
-#  if they are coded to a higher standard.
-#   STRICT -  ANSI C++ force strict warning flags
-#   NORMAL -  ANSI C++ optional warning flags
-CXXCMPLR=NORMAL
-
-SPECIAL_LANG = .

config/CONFIG_SITE.hp700

@@ -1,21 +0,0 @@
-#
-# CONFIG_SITE.Unix.hp700
-#
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Default compiler, individual Makefiles will override
-#  if they cannot support ANSI compilation.
-#   STRICT -  ANSI C - force warning flags
-#   ANSI   -  ANSI C
-#   OLD    -  Standard C - Not appropriate here.
-CMPLR=ANSI
-
-# Default SUN C++ compiler, individual Makefiles will override
-#  if they are coded to a higher standard.
-#   STRICT -  ANSI C++ force strict warning flags
-#   NORMAL -  ANSI C++ optional warning flags
-CXXCMPLR=NORMAL
-#CXXCMPLR=STRICT
-

config/CONFIG_SITE.mv162

@@ -1,9 +0,0 @@
-
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Epics defs
-
-

config/CONFIG_SITE.mv162lc

@@ -1,9 +0,0 @@
-
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Epics defs
-
-

config/CONFIG_SITE.mv167

@@ -1,9 +0,0 @@
-
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Epics defs
-
-

config/CONFIG_SITE.mv177

@@ -1,9 +0,0 @@
-
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Epics defs
-
-

config/CONFIG_SITE.niCpu030

@@ -1,9 +0,0 @@
-
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# Epics defs
-
-

config/CONFIG_SITE.pc486

@@ -1,6 +0,0 @@
-# $Log$
-# Revision 1.1.2.1  1996/11/25 20:20:22  jhill
-# installed
-#
-# -kuk-
-