cfd3680176
gotthard2 dacs
2019-10-08 17:10:36 +02:00
030cfacc9b
WIP
2019-10-08 10:57:07 +02:00
Marie Andrä
5f94b5c246
Dac ( #67 )
...
* dac WIP
* dacs WIP
* DACs are working with names
* namechanges of vrfsh->vshaper, vrfshnpol->vshaperneg
* pattern for MY3, configure MAC for MY3
2019-10-07 12:13:25 +02:00
0f99dd141e
gotthard 2 server test bus
2019-10-01 17:34:52 +02:00
Dhanya Thattil
ca054626e6
Removeudpcache ( #65 )
...
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* solved eiger 1-10g issue
* some fixes for remove udp cache to work
* bug fix virtual
* removed special handling of rx_udpip
2019-09-30 14:46:25 +02:00
Marie Andrä
6e6fcec698
MY3.0:read and write Registers, frames, cycles, delay ( #64 )
...
* MY3.0:read and write Registers, frames, cycles, delay
* write pattern seems to work
* done all corrections. added default clks: run_clk=125MHz, tick_clk=20MHz (fix), sampling_clk=80MHz (from Carlos)
* clk check for aquistition time
* clk check for aquistition time
* Update slsDetectorServer_defs.h
* Update slsDetectorFunctionList.c
2019-09-30 14:36:33 +02:00
288b59d292
gotthard2 changes for first firmware version
2019-09-26 14:10:11 +02:00
Marie Andrä
4b987abf41
Niosmarie ( #63 )
...
* HV for Mythen3 server
* HV for mythen3 server
* corrected upstreams
* missing endif
2019-09-03 09:36:02 +02:00
Dhanya Thattil
5bcde789ac
Readoutflags ( #61 )
...
* WIP
* eiger binary back wih versioning
* fixed readout flag in ctbgui, added speedLevel enum
* ctbgui: fixed a print out error
* ctb readout bug fix
* WIP
* WIP
* WIP
2019-09-02 19:27:27 +02:00
02634abbbc
gotthard2:virtual server fix, server recompile
2019-09-02 13:05:28 +02:00
bd95126da2
gotthard2:hv
2019-09-02 12:57:24 +02:00
4a112104ad
gotthard2, removed .gdb, removed warnings
2019-08-30 18:08:16 +02:00
9bc6c44e51
hv for strip
2019-08-30 17:53:04 +02:00
8c15b52b87
nios
2019-08-30 17:28:18 +02:00
Dhanya Thattil
0d35b966ff
Separate headers ( #57 )
...
* WIP, ctb
* WIP, eiger
* WIP, gotthard
* WIP, jungfrau
* WIP, gotthard2
* WIP, mythen3
* WIP, moench
* fixed gotthard apiversioning mismatch with gotthard2
2019-08-30 11:17:37 +02:00
94013a7fad
delay not implemented for mythen3 and gotthad2
2019-08-26 11:58:34 +02:00
aecf3bb7db
gotthard udp fix
2019-08-26 11:47:28 +02:00
3497175b15
merge resovled
2019-08-26 10:55:44 +02:00
298e1dd1fe
udp virtual of gotthard2
2019-08-26 10:54:01 +02:00
Marie Andrä
f981825172
virtual UDP for mythen3 ( #55 )
2019-08-26 10:53:17 +02:00
386b6601a8
initial version of gotthard2
2019-08-26 09:59:27 +02:00
4b7ab98135
initial functions for mythen3
2019-08-22 15:55:27 +02:00
72362b0334
first version of mythen3
2019-08-22 12:34:06 +02:00
28963e313b
removed gotthard functions not used
2019-08-20 18:18:34 +02:00
51a3f3fd4d
changed logger.h to clogger.h for c files
2019-08-20 08:48:12 +02:00
c6dddaba97
allowed virtual servers
2019-08-16 18:49:08 +02:00
a0bdfcdae3
WIP
2019-08-16 17:38:41 +02:00
947252c852
WIP
2019-08-16 09:45:49 +02:00
d4d8cbe9bc
gotthard fixed roi only xmin and xmax.remove updateoffsets
2019-08-14 09:20:50 +02:00
5a483eaf29
WIP, new eiger serveR
2019-08-09 11:11:29 +02:00
Dhanya Thattil
98ddf154b2
Partialreadout ( #47 )
...
* eiger server, rxr: partial readout, also gui messages: up last command, down clear command
* added binaries and resolved conflict
* bugfix eiger server: interrupt subframe is bit 2 and not bit number 3
* brackets in defs
2019-08-07 09:08:58 +02:00
Dhanya Thattil
d72b6c3659
eiger server: quad, interrupt subframe, reg left and right ( #45 )
...
* eiger server: quad, interrupt subframe, reg left and right
* eiger server: beb can fail in setting up quad, quad and gap pixels
2019-08-06 10:12:34 +02:00
facbc60907
jungfrau server: changes for old and new boards
2019-07-30 09:32:10 +02:00
Dhanya Thattil
6e4e2c4524
Startingfnum ( #40 )
...
* starting fnum
* by default starting fnum disabled in gui
* insignificant change
* adding binary
* virtual eiger server working now
* test:: namespace
2019-07-23 14:15:08 +02:00
Dhanya Thattil
e7a76ccea1
Quad ( #39 )
...
* making quad work in developer branch
* binary added
* minor changes
* bug fix to set quad to 0 when more than 1 detector
2019-07-22 16:41:03 +02:00
0f2641f9fa
WIP
2019-07-12 18:24:23 +02:00
0954bdd2d3
Merge branch 'developer' into gui
2019-07-02 17:29:50 +02:00
f4fa19b559
bugfix rxr: checkonline prints error msg, call receiverversion instead
2019-07-02 17:29:38 +02:00
fc2cc7e00c
WIP
2019-07-02 12:09:37 +02:00
3db09bc0cd
Merge branch 'developer' into gui
2019-06-25 09:08:29 +02:00
4b69c01357
ctb server: sync clk get added
2019-06-19 16:55:24 +02:00
b6bba0b7bc
Merge branch 'developer' into gui
2019-06-17 17:41:17 +02:00
6e14a2efe2
ctb fix: reset pll reset also adc and dbit phase (fixed), also required adcs to be configured again(due to adc clock being stopped temporarily
2019-06-17 17:24:59 +02:00
c96939cf94
neglible change
2019-06-17 11:45:56 +02:00
39be0770e3
ctb server fixed to have 180 adc output phase
2019-06-14 16:43:56 +02:00
862dc824ba
WIP
2019-06-05 11:27:19 +02:00
a6144f658e
ctb client and server bug fix: dac didnt compute indices correctly and set dac was not printing in server
2019-06-04 18:11:31 +02:00
b74ce95b24
removed colon in commands. affects dac, adc and extsig
2019-06-04 12:10:26 +02:00
Dhanya Thattil
29141ac1a6
set starting frame number of next acquisition for both jungfrau and e… ( #27 )
...
* set starting frame number of next acquisition for both jungfrau and eiger. firmware has not implemented a get, so workaround. tests included. frame number 0 not allowed due to Eiger. Eiger max frame is 48 bit, while jungfrau is 64 bit
* made argument of setstartingframenumber const
2019-06-03 11:07:53 +02:00
Dhanya Thattil
894cc1c9e0
Simulator ( #28 )
...
* WIP
* wip
* wip
* removed loop
* sending 1 frame
* send multiple frames
* c11 for server
* WIP
* WIP
* Add CMake for the simulators. Requires some refactoring to make slsDetectorServer a proper library.
* Working cmake for jungfrau
* Working cmake for eiger
* WIP
* WIP
* Add preliminary working eiger simulator and breaks the jungfrau simulator
* virtual servers connected
* changes to make it work for rhel7 and install binaries in bin
* removed some unnecessary prints
* removed binaries and virtual makefiles
2019-06-03 10:16:54 +02:00
