mirror of
https://github.com/slsdetectorgroup/slsDetectorPackage.git
synced 2025-04-24 07:20:01 +02:00
updated release for 7.0.2
This commit is contained in:
parent
c26947970c
commit
399d72a3e5
259
releases/RELEASE_v7.0.2.txt
Normal file
259
releases/RELEASE_v7.0.2.txt
Normal file
@ -0,0 +1,259 @@
|
||||
SLS Detector Package Major Release 7.0.2 released on 12.07.2023
|
||||
===============================================================
|
||||
|
||||
This document describes the differences between v7.0.2 and v7.0.1
|
||||
|
||||
|
||||
|
||||
CONTENTS
|
||||
--------
|
||||
1 Resolved Issues
|
||||
2 On-board Detector Server Compatibility
|
||||
3 Firmware Requirements
|
||||
4 Kernel Requirements
|
||||
5 Download, Documentation & Support
|
||||
|
||||
|
||||
|
||||
1 Resolved Issues
|
||||
=================
|
||||
|
||||
|
||||
Firmware
|
||||
--------
|
||||
|
||||
* [Jungfrau] Stopping acquisition in sync mode
|
||||
Previously, stopping acquisition in sync mode would result in the slave
|
||||
status remaining in Running status for next acquisition and framesl (frames
|
||||
left) would be stuck from the previous acquisition. This is fixed in firmware.
|
||||
|
||||
|
||||
|
||||
Detector Server
|
||||
---------------
|
||||
|
||||
* [Jungfrau] Changing master to slave in sync mode
|
||||
When in sync mode, changing from master to slave would change the status
|
||||
to Running in firmware. A workaround in the detector server fixes this.
|
||||
|
||||
* [Jungfrau] Row and column for multi module Jungfrau
|
||||
This mainly affected only the GUI, unless one was using the row and column
|
||||
sent out by the detector. Row and column values were mixed up, but fixed now.
|
||||
|
||||
* [Jungfrau] Timing in sync mode
|
||||
When sync is enabled, setting or getting timing would give an error. This
|
||||
is fixed now.
|
||||
|
||||
|
||||
Client
|
||||
------
|
||||
|
||||
* [Jungfrau] Multi module sync mode
|
||||
For start, stop and trigger acquisition, the procedure to start the slaves
|
||||
(or the master for stop acquisition) first had to be obeyed. This is fixed
|
||||
now.
|
||||
|
||||
|
||||
ZMQ
|
||||
---
|
||||
|
||||
* [Jungfrau][Gotthard2] Client ZMQ port when using 2 interfaces
|
||||
When switching between 1 and 2 interfaces, the client or gui zmq port
|
||||
was not set properly and resulted in dummy streaming forever. This is
|
||||
fixed now.
|
||||
|
||||
* Rx_roi
|
||||
This parameter is now also streamed in the zmq header to be able to use in
|
||||
external GUIs.
|
||||
|
||||
|
||||
GUI
|
||||
---
|
||||
|
||||
* [Jungfrau] Show Fix_G0 in expert mode
|
||||
Fix_G0 was only shown when expert mode was enabled from Settings Tab. Now,
|
||||
fixed to show when expert mode enabled from any tab.
|
||||
|
||||
|
||||
|
||||
|
||||
2 On-board Detector Server Compatibility
|
||||
==========================================
|
||||
|
||||
|
||||
Eiger 7.0.0
|
||||
Jungfrau 7.0.2
|
||||
Mythen3 7.0.0
|
||||
Gotthard2 7.0.0
|
||||
Gotthard 7.0.0
|
||||
Moench 7.0.0
|
||||
Ctb 7.0.0
|
||||
|
||||
|
||||
On-board Detector Server Upgrade
|
||||
--------------------------------
|
||||
|
||||
From v6.1.0 (without tftp):
|
||||
Using command 'updatedetectorserver'
|
||||
From 5.0.0 (with tftp):
|
||||
Using command 'copydetectorserver'
|
||||
|
||||
Instructions available at
|
||||
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
|
||||
|
||||
|
||||
|
||||
|
||||
3 Firmware Requirements
|
||||
========================
|
||||
|
||||
|
||||
Eiger 20.02.2023 (v31)
|
||||
|
||||
Jungfrau 16.05.2023 (v1.4.1, HW v1.0)
|
||||
15.05.2023 (v2.4.1, HW v2.0)
|
||||
|
||||
Mythen3 24.01.2023 (v1.4)
|
||||
|
||||
Gotthard2 23.11.2022 (v0.3)
|
||||
|
||||
Gotthard 08.02.2018 (50um and 25um Master)
|
||||
09.02.2018 (25 um Slave)
|
||||
|
||||
Moench 05.12.2022 (v0.3)
|
||||
|
||||
Ctb 05.12.2022 (v1.1)
|
||||
|
||||
|
||||
Detector Upgrade
|
||||
----------------
|
||||
|
||||
The following can be upgraded remotely:
|
||||
|
||||
Eiger via bit files
|
||||
Jungfrau via command <.pof>
|
||||
Mythen3 via command <.rbf>
|
||||
Gotthard2 via command <.rbf>
|
||||
Moench via command <.pof>
|
||||
Ctb via command <.pof>
|
||||
|
||||
Gotthard cannot be upgraded remotely
|
||||
|
||||
Except Eiger,
|
||||
upgrade
|
||||
Using command 'programfpga' or
|
||||
|
||||
udpate both server and firmware simultaneously
|
||||
Using command 'update'
|
||||
|
||||
|
||||
Instructions available at
|
||||
https://slsdetectorgroup.github.io/devdoc/firmware.html
|
||||
|
||||
|
||||
|
||||
|
||||
4 Kernel Requirements
|
||||
======================
|
||||
|
||||
Blackfin
|
||||
--------
|
||||
Latest version: Fri Oct 29 00:00:00 2021
|
||||
|
||||
Older ones will work, but might have issues with programming firmware via
|
||||
the package.
|
||||
|
||||
Nios
|
||||
-----
|
||||
Compatible version: Mon May 10 18:00:21 CEST 2021
|
||||
|
||||
Kernel Upgrade
|
||||
---------------
|
||||
Eiger via bit files
|
||||
Others via command
|
||||
|
||||
Commands: udpatekernel, kernelversion
|
||||
Instructions available at
|
||||
https://slsdetectorgroup.github.io/devdoc/commandline.html
|
||||
https://slsdetectorgroup.github.io/devdoc/detector.html
|
||||
https://slsdetectorgroup.github.io/devdoc/pydetector.html
|
||||
|
||||
|
||||
|
||||
|
||||
5 Download, Documentation & Support
|
||||
====================================
|
||||
|
||||
Download
|
||||
--------
|
||||
|
||||
The Source Code:
|
||||
https://github.com/slsdetectorgroup/slsDetectorPackage
|
||||
|
||||
Documentation
|
||||
-------------
|
||||
|
||||
Installation:
|
||||
https://slsdetectorgroup.github.io/devdoc/installation.html
|
||||
|
||||
Quick Start Guide:
|
||||
https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
|
||||
|
||||
Firmware Upgrade:
|
||||
https://slsdetectorgroup.github.io/devdoc/firmware.html
|
||||
|
||||
Detector Server upgrade:
|
||||
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
|
||||
|
||||
Detector Simulators:
|
||||
https://slsdetectorgroup.github.io/devdoc/virtualserver.html
|
||||
|
||||
Consuming slsDetectorPackage:
|
||||
https://slsdetectorgroup.github.io/devdoc/consuming.html
|
||||
|
||||
API Examples:
|
||||
https://github.com/slsdetectorgroup/api-examples
|
||||
|
||||
Command Line Documentation:
|
||||
https://slsdetectorgroup.github.io/devdoc/commandline.html
|
||||
|
||||
C++ API Documentation:
|
||||
https://slsdetectorgroup.github.io/devdoc/detector.html
|
||||
|
||||
C++ API Example:
|
||||
https://slsdetectorgroup.github.io/devdoc/examples.html#
|
||||
|
||||
Python API Documentation:
|
||||
https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html
|
||||
|
||||
Python API Example:
|
||||
https://slsdetectorgroup.github.io/devdoc/pyexamples.html
|
||||
|
||||
Receivers (including custom receiver):
|
||||
https://slsdetectorgroup.github.io/devdoc/receivers.html
|
||||
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
|
||||
|
||||
Detector UDP Header:
|
||||
https://slsdetectorgroup.github.io/devdoc/udpheader.html
|
||||
https://slsdetectorgroup.github.io/devdoc/udpdetspec.html
|
||||
|
||||
slsReceiver Zmq Format:
|
||||
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html#zmq-json-header-format
|
||||
|
||||
TroubleShooting:
|
||||
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
|
||||
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html#receiver-pc-tuning-options
|
||||
|
||||
Further Documentation:
|
||||
https://www.psi.ch/en/detectors/documentation
|
||||
|
||||
Info on Releases:
|
||||
https://www.psi.ch/en/detectors/software
|
||||
|
||||
|
||||
Support
|
||||
-------
|
||||
|
||||
dhanya.thattil@psi.ch
|
||||
erik.frojdh@psi.ch
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user