diff --git a/releases/RELEASE_v7.0.2.txt b/releases/RELEASE_v7.0.2.txt new file mode 100644 index 000000000..6e83acd6c --- /dev/null +++ b/releases/RELEASE_v7.0.2.txt @@ -0,0 +1,259 @@ +SLS Detector Package Major Release 7.0.2 released on 12.07.2023 +=============================================================== + +This document describes the differences between v7.0.2 and v7.0.1 + + + + CONTENTS + -------- + 1 Resolved Issues + 2 On-board Detector Server Compatibility + 3 Firmware Requirements + 4 Kernel Requirements + 5 Download, Documentation & Support + + + +1 Resolved Issues +================= + + + Firmware + -------- + + * [Jungfrau] Stopping acquisition in sync mode + Previously, stopping acquisition in sync mode would result in the slave + status remaining in Running status for next acquisition and framesl (frames + left) would be stuck from the previous acquisition. This is fixed in firmware. + + + + Detector Server + --------------- + + * [Jungfrau] Changing master to slave in sync mode + When in sync mode, changing from master to slave would change the status + to Running in firmware. A workaround in the detector server fixes this. + + * [Jungfrau] Row and column for multi module Jungfrau + This mainly affected only the GUI, unless one was using the row and column + sent out by the detector. Row and column values were mixed up, but fixed now. + + * [Jungfrau] Timing in sync mode + When sync is enabled, setting or getting timing would give an error. This + is fixed now. + + + Client + ------ + + * [Jungfrau] Multi module sync mode + For start, stop and trigger acquisition, the procedure to start the slaves + (or the master for stop acquisition) first had to be obeyed. This is fixed + now. + + + ZMQ + --- + + * [Jungfrau][Gotthard2] Client ZMQ port when using 2 interfaces + When switching between 1 and 2 interfaces, the client or gui zmq port + was not set properly and resulted in dummy streaming forever. This is + fixed now. + + * Rx_roi + This parameter is now also streamed in the zmq header to be able to use in + external GUIs. + + + GUI + --- + + * [Jungfrau] Show Fix_G0 in expert mode + Fix_G0 was only shown when expert mode was enabled from Settings Tab. Now, + fixed to show when expert mode enabled from any tab. + + + + +2 On-board Detector Server Compatibility +========================================== + + + Eiger 7.0.0 + Jungfrau 7.0.2 + Mythen3 7.0.0 + Gotthard2 7.0.0 + Gotthard 7.0.0 + Moench 7.0.0 + Ctb 7.0.0 + + + On-board Detector Server Upgrade + -------------------------------- + + From v6.1.0 (without tftp): + Using command 'updatedetectorserver' + From 5.0.0 (with tftp): + Using command 'copydetectorserver' + + Instructions available at + https://slsdetectorgroup.github.io/devdoc/serverupgrade.html + + + + +3 Firmware Requirements +======================== + + + Eiger 20.02.2023 (v31) + + Jungfrau 16.05.2023 (v1.4.1, HW v1.0) + 15.05.2023 (v2.4.1, HW v2.0) + + Mythen3 24.01.2023 (v1.4) + + Gotthard2 23.11.2022 (v0.3) + + Gotthard 08.02.2018 (50um and 25um Master) + 09.02.2018 (25 um Slave) + + Moench 05.12.2022 (v0.3) + + Ctb 05.12.2022 (v1.1) + + + Detector Upgrade + ---------------- + + The following can be upgraded remotely: + + Eiger via bit files + Jungfrau via command <.pof> + Mythen3 via command <.rbf> + Gotthard2 via command <.rbf> + Moench via command <.pof> + Ctb via command <.pof> + + Gotthard cannot be upgraded remotely + + Except Eiger, + upgrade + Using command 'programfpga' or + + udpate both server and firmware simultaneously + Using command 'update' + + + Instructions available at + https://slsdetectorgroup.github.io/devdoc/firmware.html + + + + +4 Kernel Requirements +====================== + + Blackfin + -------- + Latest version: Fri Oct 29 00:00:00 2021 + + Older ones will work, but might have issues with programming firmware via + the package. + + Nios + ----- + Compatible version: Mon May 10 18:00:21 CEST 2021 + + Kernel Upgrade + --------------- + Eiger via bit files + Others via command + + Commands: udpatekernel, kernelversion + Instructions available at + https://slsdetectorgroup.github.io/devdoc/commandline.html + https://slsdetectorgroup.github.io/devdoc/detector.html + https://slsdetectorgroup.github.io/devdoc/pydetector.html + + + + +5 Download, Documentation & Support +==================================== + + Download + -------- + + The Source Code: + https://github.com/slsdetectorgroup/slsDetectorPackage + + Documentation + ------------- + + Installation: + https://slsdetectorgroup.github.io/devdoc/installation.html + + Quick Start Guide: + https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html + + Firmware Upgrade: + https://slsdetectorgroup.github.io/devdoc/firmware.html + + Detector Server upgrade: + https://slsdetectorgroup.github.io/devdoc/serverupgrade.html + + Detector Simulators: + https://slsdetectorgroup.github.io/devdoc/virtualserver.html + + Consuming slsDetectorPackage: + https://slsdetectorgroup.github.io/devdoc/consuming.html + + API Examples: + https://github.com/slsdetectorgroup/api-examples + + Command Line Documentation: + https://slsdetectorgroup.github.io/devdoc/commandline.html + + C++ API Documentation: + https://slsdetectorgroup.github.io/devdoc/detector.html + + C++ API Example: + https://slsdetectorgroup.github.io/devdoc/examples.html# + + Python API Documentation: + https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html + + Python API Example: + https://slsdetectorgroup.github.io/devdoc/pyexamples.html + + Receivers (including custom receiver): + https://slsdetectorgroup.github.io/devdoc/receivers.html + https://slsdetectorgroup.github.io/devdoc/slsreceiver.html + + Detector UDP Header: + https://slsdetectorgroup.github.io/devdoc/udpheader.html + https://slsdetectorgroup.github.io/devdoc/udpdetspec.html + + slsReceiver Zmq Format: + https://slsdetectorgroup.github.io/devdoc/slsreceiver.html#zmq-json-header-format + + TroubleShooting: + https://slsdetectorgroup.github.io/devdoc/troubleshooting.html + https://slsdetectorgroup.github.io/devdoc/troubleshooting.html#receiver-pc-tuning-options + + Further Documentation: + https://www.psi.ch/en/detectors/documentation + + Info on Releases: + https://www.psi.ch/en/detectors/software + + + Support + ------- + + dhanya.thattil@psi.ch + erik.frojdh@psi.ch +