hinger_v
2cc2e2a9ac
Add BP analysis with fixg1 and forceswitchg1, run as BP_analysis_fixG1
2021-12-17 17:02:05 +01:00
hinger_v
2e18fcddf8
Update list of calibrated modules
2021-12-10 16:32:05 +01:00
hinger_v
19aa38b092
modified analisys src to include HG0G1G2. Mainly BP .
2021-11-16 16:49:37 +01:00
hinger_v
cadf624ce6
minor: uncomment receiver in CS_scan.sh
2021-10-13 16:04:14 +02:00
hinger_v
aabbaa557e
Adapt shell scripts with new versions of commands
2021-10-13 14:07:59 +02:00
hinger_v
f12cb7ecd8
Add new software developer versions
2021-10-13 14:06:26 +02:00
hinger_v
d6cf3be69c
Add new filenames to CS_analysis.cpp
2021-10-13 14:04:55 +02:00
hinger_v
d864b12911
addded new developer slsdetpackage version, added simlink
2021-09-28 14:27:26 +02:00
hinger_v
4f35d285ac
Adapt analysis code to avoid hardcoded absolute paths (add additional argv), add paths only in filename_creator
2021-09-07 13:50:56 +02:00
hinger_v
c9ab9f4d70
adapt SW (developer #6e85603f4 of August 17th 2021, backup in slsDetector_bin_5_1_0) for check with FW 1.2 rc210831
2021-09-07 12:27:13 +02:00
mozzanica
9b07df6841
changes on Cufluo_expose_script,filename_creator and bugfix in receiver (was crashing in
...
case of two gettimeofday() call returning the same value
2021-03-24 14:12:34 +01:00
mozzanica
0641de6e13
Fixed HG0 setting for JF11 (bit 1 of reg 0x5d + conf register reload)
...
CS script changed to start and kill receivers autoamtically.
Mudules 347 361 362 355 364 366 calibrated with these scripts
2021-03-15 08:15:20 +01:00
mozzanica
d4fff9739a
in progress commit for JF11 calibration. FW and SW updated to 5.1.0.rc
2021-03-03 10:34:06 +01:00
mozzanica
11a16975e9
Used for calibration of M314-313 310 Jan 2021
2021-02-17 13:27:06 +01:00
mozzanica
9ff07bd0b9
modified for V2.0 boards, added sls_det binaries, added file and folder creation script
2020-11-11 16:15:31 +01:00
redford_s
2cb06fcf98
Calibrated five more modules.
2020-01-31 10:50:02 +01:00
redford_s
d97b8259e4
Make directories automatically and calibrated five modules.
2020-01-20 14:43:15 +01:00
redford_s
f559847707
New connections in the lab and new xraybox client.
2020-01-20 14:41:01 +01:00
redford_s
f5100918f2
Ran calibration of module 288.
2020-01-10 14:45:15 +01:00
redford_s
f54adfd759
Change in default G0 value.
...
Necessary for module 277. Considering all calibrated modules, original value was abit too low.
2020-01-08 11:35:36 +01:00
redford_s
00ef2145ea
Calibrating modules for LCLS 4M.
2020-01-06 17:23:49 +01:00
l_mozzanica
56098adb4f
added history_aldo.txt and changed default for int createPerStepHistos = 0;
2019-11-27 15:13:03 +01:00
redford_s
83bf76313c
Adding historical M032 CS test. HDI was old so data aren't good.
2019-11-14 15:38:22 +01:00
redford_s
35d37cd26e
Repointing to copied data in pcmoench_jungfrau_calib/data.
2019-11-13 14:38:19 +01:00
redford_s
38b8d2f304
More repointing of pcmoench_jungfrau_data to pcmoench_jungfrau_calib/data.
2019-11-07 14:35:41 +01:00
redford_s
68d8f054b0
Repoint for calib data transfer from pcmoench_jungfrau_data to pcmoench_jungfrau_calib.
2019-11-06 11:39:35 +01:00
redford_s
d7af95b694
Calibrated a 4M.
2019-11-05 15:28:43 +01:00
redford_s
0827436bd2
Comparison between JF1p0 and JF1p1 BP scan for linearity.
2019-10-29 15:07:01 +01:00
redford_s
3129289c8b
For the calibration that takes place in the lab, use the direct link to mpc2012 instead of going over the network.
2019-09-04 14:40:29 +02:00
redford_s
8c3b6681ec
More BP scans for module 246.
2019-09-04 14:34:55 +02:00
redford_s
c32b02f47c
Calibrated five modules.
2019-08-15 14:12:38 +02:00
redford_s
d5ff6b1eb6
More BP tests with M246.
2019-08-02 12:10:38 +02:00
redford_s
2c2251a43d
Change the maximum fit range allowed in Backplane Pulsing.
...
Due to the amplifier plateau at the end of its range. According to the
datasheet of the amplifier (Analog devices model ADA4870) the output
voltage swing is 37 V with a 40 V supply. This is the cause of the
non-linearity at the end of the scans. The fit should only extend to
7 V - (3 V / gain factor of 5) = 6.4 V. All modules have been rerun.
2019-07-29 12:28:57 +02:00
redford_s
ef9edbf1fc
Removed a repeated scan for module 008. Results were the same as for the other scan.
2019-07-29 12:01:15 +02:00
redford_s
048bc2dc4a
Calibrated five modules.
2019-07-26 09:05:41 +02:00
redford_s
2eac718278
Calibrated stripsel module 211 for SwissFEL FLEX.
2019-07-17 09:00:40 +02:00
redford_s
c54d72577a
More datasets were moved from pcmoench_jungfrau_data to pcmoench_jungfrau_calib.
2019-06-28 09:38:57 +02:00
redford_s
6d63e65f28
Some datasets were moved from pcmoench_jungfrau_data to pcmoench_jungfrau_calib.
2019-06-19 12:04:19 +02:00
redford_s
c0e398f9b5
Fix to catch nan values.
...
Eight modules previously had nan values in their gain maps:
092, 094, 099, 210, 225, 233, 242, 264
Their gain maps were updated today.
2019-06-14 17:06:21 +02:00
redford_s
22ab895af0
Calibrated another 4M.
2019-06-14 15:58:10 +02:00
redford_s
8126940dab
Updating the calibration of module 008, brought to PSI from PAL.
2019-06-12 09:04:28 +02:00
redford_s
94ed5a69ed
Calibrated another 4M.
2019-04-15 18:02:45 +02:00
redford_s
b0f4a3095c
Removed default pixel masks.
...
Now the pixel mask refers only to the pedestal data. There's an independent check of whether the calibration worked.
2019-04-15 18:01:01 +02:00
redford_s
3b0059ba79
Check fit exists.
...
For very unruly datasets, all points can have negative error (average of the same value has no well defined error).
Can't work out how to preserve gain switching checks and remove these points at the same time. So check.
2019-04-15 14:35:06 +02:00
redford_s
bcac128bc2
Now that gain filenames contain a date, better to check if the data directory exists.
2019-02-27 15:06:45 +01:00
redford_s
fb1d930127
Module comparison now uses the most recent gain file.
2019-02-27 14:52:44 +01:00
redford_s
9e24a15bb6
Create plot directory if it doesn't exist.
2019-02-27 13:46:49 +01:00
redford_s
597a685bc9
Automatically find all calibrated modules, don't need the list by hand.
2019-02-26 14:09:43 +01:00
redford_s
2a9a583d17
Script to plot changes between two calib bin files.
2019-02-26 12:21:07 +01:00
redford_s
9bf8924dc8
Removed the pixel masks. no_calib are now accurate, and things aren't hidden.
2019-02-25 10:48:57 +01:00
hinger_v
mozzanica