modified for V2.0 boards, added sls_det binaries, added file and folder creation script

BP_scan.sh

@@ -3,22 +3,19 @@
 # to run do: bash BP_scan.sh
 
 # prerequisites:
+# - setup_env.sh souced
 # - the hostname is set
-# - export PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$PATH
-# - export LD_LIBRARY_PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$LD_LIBRARY_PATH
 # - detector is on
 # - waveform generator is on
-# - amplifier board is powered +35 V -5 V
+# - amplifier board is powered and unconnected.
 
 sls_detector_put powerchip 1
 
-# set ADCINVERSionreg (by trial and error)
-sls_detector_put reg 0x43 0x453b2a9c
 
 sls_detector_put delay 0
 sls_detector_put cycles 1
 sls_detector_put frames 100
-sls_detector_put period 0.002 
+sls_detector_put period 0.005 
 sls_detector_put exptime 0.000020 
 sls_detector_put vhighvoltage 0
 
@@ -29,49 +26,51 @@ sls_detector_put rx_udpip 10.1.4.105
 sls_detector_put rx_udpmac 3C:FD:FE:A2:14:D8
 sls_detector_put detectorip 10.1.4.9
 sls_detector_put detectormac 00:ab:be:cc:dd:e2
-sls_detector_put configuremac 0 
+#sls_detector_put configuremac 0 
+sls_detector_put speed  1
+
 
 
 # prepare the AGILENT 33250A
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay OUTP OFF
-sleep 1
+sleep 0.2
 
 # pulse
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay FUNC PULS
-sleep 1
+sleep 0.2
 # frequency 1kHz
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay FREQ 1000
-sleep 1
+sleep 0.2
 # width 40 us
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay PULS:WIDT 0.000040
-sleep 1
+sleep 0.2
 # amplitude 0.1 V
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay VOLT 0.1
-sleep 1
+sleep 0.2
 # offset 0 V
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay VOLT:OFFS 0
-sleep 1
+sleep 0.2
 # edge 50 ns
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay PULS:TRAN 0.000000050
-sleep 1
+sleep 0.2
 # triggered burst
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay BURS:MODE TRIG
-sleep 1
+sleep 0.2
 # cycles 1
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay BURS:NCYC 1
-sleep 1
+sleep 0.2
 # external trigger source
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay TRIG:SOUR EXT
-sleep 1
+sleep 0.2
 # delay 1 us
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay TRIG:DEL 0.000001
-sleep 1
+sleep 0.2
 # slope positive
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay TRIG:SLOP POS
-sleep 1
+sleep 0.2
 # turn on burst mode
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay BURS:STAT ON
-sleep 1
+sleep 0.2
 
 
 echo "It is now safe to connect the cable between the amplifier board and the readout board"
@@ -86,7 +85,7 @@ fi
 sls_detector_put vhighvoltage 200
 # output on
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay OUTP ON
-sleep 1
+sleep 0.2
 
 echo "The current on the amplifier board should be ~0.035 A"
 echo "Please check and press any key to continue, or press q to exit this script"
@@ -112,7 +111,7 @@ do
 vpulse=$(printf %.3f $(echo "$ivpulse/1000" | bc -l))
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay VOLT $vpulse
 sleep 1
-sls_detector_put status start 
+sls_detector_put start 
 sleep 1
 done
 
@@ -121,7 +120,7 @@ do
 vpulse=$(printf %.3f $(echo "$ivpulse/1000" | bc -l))
 /afs/psi.ch/project/sls_det_software/serial_control_software/minidelay/minidelay VOLT $vpulse
 sleep 1
-sls_detector_put status start 
+sls_detector_put start 
 sleep 1
 done
 

CS_scan.sh

@@ -3,15 +3,13 @@
 # to run do: bash CS_scan.sh
 
 # prerequisites:
+# - setup_env.sh souced 
 # - the hostname is set
-# - export PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$PATH
-# - export LD_LIBRARY_PATH=/afs/psi.ch/project/sls_det_software/latest_slsDetectorPackage/build/bin:$LD_LIBRARY_PATH
 # - detector is on
 
 sls_detector_put powerchip 1
 
-# set ADCINVERSionreg (by trial and error)
-sls_detector_put reg 0x43 0x453b2a9c 
+
 
 sls_detector_put frames 640
 sls_detector_put period 0.005
@@ -24,7 +22,7 @@ sls_detector_put rx_udpip 10.1.4.105
 sls_detector_put rx_udpmac 3C:FD:FE:A2:14:D8
 sls_detector_put detectorip 10.1.4.9
 sls_detector_put detectormac 00:ab:be:cc:dd:e2
-sls_detector_put configuremac 0 
+
 
 
 echo "The receiver should be waiting for data"
@@ -37,19 +35,19 @@ fi
 
 
 echo "recording G0 pede" 
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 
 
 echo "recording G1 pede" 
 sls_detector_put setbit 0x5d 12
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 
 
 echo "recording G2 pede"
 sls_detector_put setbit 0x5d 13
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 
 
@@ -70,7 +68,7 @@ do
 tint_sec=$(printf %.9f $(echo "$tint/1000000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec
 sls_detector_put exptime $tint_sec
-sls_detector_put status start
+sls_detector_put start
 sleep 4
 done
 
@@ -81,7 +79,7 @@ do
 tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec
 sls_detector_put exptime $tint_sec
-sls_detector_put status start
+sls_detector_put start
 sleep 4
 done
 
@@ -92,7 +90,7 @@ do
 tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec
 sls_detector_put exptime $tint_sec
-sls_detector_put status start
+sls_detector_put start
 sleep 4
 done
 
@@ -103,7 +101,7 @@ do
 tint_sec=$(printf %.8f $(echo "$tint/100000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec
 sls_detector_put exptime $tint_sec
-sls_detector_put status start
+sls_detector_put start
 sleep 4
 done
 
@@ -114,7 +112,7 @@ do
 tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec 
 sls_detector_put exptime $tint_sec
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 done
 
@@ -125,7 +123,7 @@ do
 tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec 
 sls_detector_put exptime $tint_sec
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 done
 
@@ -136,7 +134,7 @@ do
 tint_sec=$(printf %.7f $(echo "$tint/10000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec 
 sls_detector_put exptime $tint_sec
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 done
 
@@ -147,7 +145,7 @@ do
 tint_sec=$(printf %.7f $(echo "$tint/1000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec 
 sls_detector_put exptime $tint_sec
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 done
 
@@ -158,7 +156,7 @@ do
 tint_sec=$(printf %.7f $(echo "$tint/1000000" | bc -l))
 echo "setting integration time to (s) " $tint_sec 
 sls_detector_put exptime $tint_sec
-sls_detector_put status start 
+sls_detector_put start 
 sleep 4
 done
 

datafilenameexample.txt

@@ -0,0 +1,8 @@
+-rw-rw-r--. 1 l_msdetect l_msdetect 10485920000 Feb 14  2019 BP_M242_2019-02-14_000000.dat
+-rw-rw-r--. 1 l_msdetect l_msdetect 10485920000 Feb 14  2019 CS_M242_2019-02-14_000000.dat
+-rw-rw-r--. 1 l_msdetect l_msdetect 10485920000 Feb 15  2019 CuFluoG0_M242_2019-02-15_000000.dat
+-rw-rw-r--. 1 l_msdetect l_msdetect 10485920000 Feb 15  2019 CuFluoHG0_M242_2019-02-15_000000.dat
+-rw-rw-r--. 1 l_msdetect l_msdetect  3145776000 Feb 15  2019 pedeG0_M242_2019-02-15_000000.dat
+-rw-rw-r--. 1 l_msdetect l_msdetect  1048592000 Feb 15  2019 pedeHG0_M242_2019-02-15_000000.dat
+[l_mozzanica@mpc2012 data ]$ pwd
+/mnt/pcmoench_jungfrau_calib/data

filename_creator.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+echo "printing filenames for module " $1
+echo "copy paste to execute "
+datafolder="/mnt/pcmoench_jungfrau_calib/data/Module_"$1"_Calib/"
+datestring=$(date +%F)
+echo "mkdir "$datafolder
+
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"BP_M"$1"_"$datestring"_ 10.1.4.105"
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"CS_M"$1"_"$datestring"_ 10.1.4.105"
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"CuFluoG0_M"$1"_"$datestring"_ 10.1.4.105"
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"CuFluoHG0_M"$1"_"$datestring"_ 10.1.4.105"
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"pedeG0_M"$1"_"$datestring"_ 10.1.4.105"
+echo "./ju_udp_receiver_3threads_2_0 S "$datafolder"pedeHG0_M"$1"_"$datestring"_ 10.1.4.105"
+
+echo "creating the output folders?   Y for yes "
+read -n 1 -s input
+if [[ $input = "Y" ]]; then 
+    echo "creating the output folders."
+    plotbasefolder="/afs/psi.ch/project/mythen/sophie/JFCalibration/plot/M"$1
+    mkdir -v $plotbasefolder
+    mkdir -v $plotbasefolder"/BackplanePulsing"
+    mkdir -v $plotbasefolder"/Calib_"$datestring
+    mkdir -v $plotbasefolder"/CuFluo"
+    mkdir -v $plotbasefolder"/CuFluo/G0"
+    mkdir -v $plotbasefolder"/CuFluo/HG0"
+    mkdir -v $plotbasefolder"/CurrentSource"
+    outdatabasefolder="/afs/psi.ch/project/mythen/sophie/JFCalibration/data/M"$1
+    mkdir -v $outdatabasefolder
+    echo "Output folders created"
+  
+else
+    echo "Exiting script"
+ 
+fi
+ 

setup_env.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+export PATH=$PWD/slsDetector_bin:$PATH
+export LD_LIBRARY_PATH=$PWD/slsDetector_bin:$LD_LIBRARY_PATH
+export SLSDETNAME=slscalib