MicroSpectro/Pixelator
Private
Public Access
11
1
Wiki

Remove Comedi and fis SystemInstall dirs

watts
2023-11-21 22:15:12 +01:00
parent d658db58c6
commit b3ccf694d7
1 changed files with 4 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
Setup-Computer-Debian-12.md

@@ -87,7 +87,7 @@ make
export EPICS_CA_ADDR_LIST="sls-x07da-cagw.psi.ch:5822"
sudo cp ~/work/stxm/SystemInstall/epics-7.0.6.conf /etc/ld.so.conf.d
sudo cp ~/work/stxm/SystemInstall/epics/epics-7.0.6.conf /etc/ld.so.conf.d
# edit to match lib Path
sudo ldconfig
```
@@ -96,7 +96,7 @@ sudo ldconfig
```
cd ~/Basesystem
tar xfvj ../work/stxm/SystemInstall/PI_Application_Software-1.17.0.1-INSTALL.tar.bz2
tar xfvj ../work/stxm/SystemInstall/HW-Libs/PI_Application_Software-1.17.0.1-INSTALL.tar.bz2
cd PI_Application_Software/
sudo ./INSTALL
#n
@@ -113,21 +113,8 @@ sudo ./INSTALL
```
cd /usr/local
sudo mkdir intens
sudo tar xfvz ~/work/stxm/SystemInstall/intens-4.5.15-snapshot-64-qt5.tar.gz
sudo cp ~/work/stxm/SystemInstall/libpython3.8.so.1.0 /lib/x86_64-linux-gnu/
```
- Load Comedi driver and configure cards
Note: Again, only needed if Agilent interferometer card needs to be supported. This step turns off the auto-loading of driver modules and sets a manual list of modules to be loaded. This list may need to be [adapted to the available hardware](Orocos-Configuration).
```
sudo cp ~/work/stxm/SystemInstall/ComediLoadModules /etc/init.d
cd /etc/rc5.d
sudo ln -s ../init.d/ComediLoadModules S98ComediLoadModules
sudo cp ~/work/stxm/SystemInstall/comedi.conf /etc/modprobe.d
sudo tar xfvz ~/work/stxm/SystemInstall/intens/intens-4.5.15-snapshot-64-qt5.tar.gz
sudo cp ~/work/stxm/SystemInstall/intens/libpython3.8.so.1.0 /lib/x86_64-linux-gnu/
```