start Version 2.8

Removing conflict at write in devmmboDirectStream.c

.cvsignore

@@ -0,0 +1,7 @@
+O.*
+*~
+bin
+lib
+dbd
+include
+*.pdf

.gitignore

@@ -0,0 +1,7 @@
+O.*
+*~
+bin
+lib
+dbd
+include
+*.pdf

GNUmakefile

@@ -1,38 +1,22 @@
-# Remove this file if not using the PSI build system
+ifeq ($(wildcard /ioc/tools/driver.makefile),)
+$(warning It seems you do not have the PSI build environment. Remove GNUmakefile.)
+include Makefile
+else
 include /ioc/tools/driver.makefile
 EXCLUDE_VERSIONS = 3.13.2
 PROJECT=stream
 BUILDCLASSES += Linux
 
-#DOCUDIR = doc
+DOCUDIR = documentation
 
-BUSSES  += AsynDriver
-BUSSES  += Dummy
+PCRE=1
+ASYN=1
+-include src/CONFIG_STREAM
 
-FORMATS += Enum
-FORMATS += BCD
-FORMATS += Raw
-FORMATS += RawFloat
-FORMATS += Binary
-FORMATS += Checksum
-FORMATS += Regexp
-FORMATS += MantissaExponent
-FORMATS += Timestamp
-
-RECORDTYPES += aai aao
-RECORDTYPES += ao ai
-RECORDTYPES += bo bi
-RECORDTYPES += mbbo mbbi
-RECORDTYPES += mbboDirect mbbiDirect
-RECORDTYPES += longout longin
-RECORDTYPES += stringout stringin
-RECORDTYPES += waveform
-
-SOURCES += $(RECORDTYPES:%=src/dev%Stream.c)
+SOURCES += $(RECORDS:%=src/dev%Stream.c)
 SOURCES += $(FORMATS:%=src/%Converter.cc)
 SOURCES += $(BUSSES:%=src/%Interface.cc)
-SOURCES += $(wildcard src/Stream*.cc)
-SOURCES += src/StreamVersion.c
+SOURCES += $(STREAM_SRCS:%=src/%)
 
 HEADERS += devStream.h
 HEADERS += StreamFormat.h
@@ -40,10 +24,6 @@ HEADERS += StreamFormatConverter.h
 HEADERS += StreamBuffer.h
 HEADERS += StreamError.h
 
-ifneq (${EPICS_BASETYPE},3.13)
-RECORDTYPES += calcout
-endif
-
 StreamCore.o: streamReferences
 
 streamReferences:
@@ -54,3 +34,4 @@ export DBDFILES = streamSup.dbd
 streamSup.dbd:
 	@echo Creating $@
 	perl ../src/makedbd.pl $(RECORDTYPES) > $@
+endif

Makefile

@@ -1,24 +1,29 @@
 TOP = ..
 
-DIRS = src
-streamApp_DEPEND_DIRS  = src
-
 # Look if we have EPICS R3.13 or R3.14
-ifeq ($(wildcard $(TOP)/configure),)
-  # EPICS R3.13
-  include $(TOP)/config/CONFIG_APP
-  CONFIG = $(TOP)/config
-else
+ifneq ($(wildcard $(TOP)/configure),)
   # EPICS R3.14
+  DIRS = configure
+  include $(TOP)/configure/CONFIG
+else ifneq ($(wildcard $(TOP)/config),)
+  # EPICS R3.13
+  CONFIG = $(TOP)/config
+  DIRS = config
+  include $(TOP)/config/CONFIG_APP
+else
+  TOP = .
+  DIRS = configure
   include $(TOP)/configure/CONFIG
-  ifneq ($(words $(CALC) $(SYNAPPS)), 0)
-    # with synApps calc module (contains scalcout)
-    DIRS += srcSynApps
-    srcSynApps_DEPEND_DIRS  = src
-    streamApp_DEPEND_DIRS  += srcSynApps
-  endif
 endif
 
+DIRS += src
+src_DEPEND_DIRS = configure
 DIRS += streamApp
+streamApp_DEPEND_DIRS = src
 
-include $(CONFIG)/RULES_DIRS
+include $(CONFIG)/RULES_TOP
+
+documentation/stream.pdf: documentation/*.html documentation/*.css documentation/*.png
+	cd documentation; makepdf
+
+install: documentation/stream.pdf

config/CONFIG

@@ -0,0 +1,3 @@
+#CONFIG
+# Add any changes to make rules here
+#CROSS_COMPILER_TARGET_ARCHS = mv167

config/CONFIG_APP

@@ -0,0 +1,20 @@
+#CONFIG_APP 
+include $(TOP)/config/RELEASE
+-include $(TOP)/config/RELEASE.$(HOST_ARCH)
+include $(EPICS_BASE)/config/CONFIG
+INSTALL_LOCATION = $(TOP)
+ifdef INSTALL_LOCATION_APP
+INSTALL_LOCATION = $(INSTALL_LOCATION_APP)
+endif
+
+ifdef T_A
+-include $(TOP)/config/O.$(T_A)/CONFIG_APP_INCLUDE
+endif
+
+# Where to install databases
+INSTALL_DB = $(INSTALL_LOCATION)/db
+# dbst based database optimization (default: NO)
+DB_OPT = NO
+# May be overridden if not all databases should be installed
+INSTALLDB = $(DB)
+include $(TOP)/config/CONFIG

config/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile,v 1.1.2.1 1999/07/15 19:55:30 jba Exp
+#
+
+TOP=..
+include $(TOP)/config/CONFIG_APP
+
+include $(TOP)/config/RULES_ARCHS
+

config/Makefile.Host

@@ -0,0 +1,21 @@
+#
+# Makefile.Host,v 1.1.2.3 2001/09/14 19:39:14 anj Exp
+#
+
+TOP=../..
+include $(TOP)/config/CONFIG_APP
+
+TARGETS = checkRelease CONFIG_APP_INCLUDE
+
+include $(TOP)/config/RULES.Host
+
+inc:: $(TARGETS)
+
+CONFIG_APP_INCLUDE: $(wildcard $(TOP)/config/RELEASE*) $(TOP)/config/CONFIG_APP
+	$(PERL) $(TOP)/config/convertRelease.pl $@
+
+checkRelease:
+	$(PERL) $(TOP)/config/convertRelease.pl $@
+
+.PHONY :: checkRelease
+

config/Makefile.Vx

@@ -0,0 +1,15 @@
+#
+# Makefile.Vx,v 1.1.2.3 2001/09/14 19:39:15 anj Exp
+#
+
+TOP=../..
+include $(TOP)/config/CONFIG_APP
+
+TARGETS = CONFIG_APP_INCLUDE
+
+include $(TOP)/config/RULES.Vx
+
+inc:: $(TARGETS)
+
+CONFIG_APP_INCLUDE: $(wildcard $(TOP)/config/RELEASE*) $(TOP)/config/CONFIG_APP
+	$(PERL) $(TOP)/config/convertRelease.pl -h $(HOST_ARCH) $@

config/RELEASE

@@ -0,0 +1 @@
+include $(TOP)/configure/RELEASE

config/RULES.Db

@@ -0,0 +1,203 @@
+# RULES.Db,v 1.9.6.6 2003/03/25 23:13:22 jba Exp
+#
+#	Rules for making things related to databases
+#
+MAKEBPT		= $(EPICS_BASE_HOST_BIN)/makeBpt$(EXE)
+DBLOADTEMPLATE	= $(EPICS_BASE_HOST_BIN)/dbLoadTemplate$(EXE)
+DBEXPAND	= $(EPICS_BASE_HOST_BIN)/dbExpand$(EXE)
+DBST		= dbst
+MAKEDBDEPENDS	= $(PERL) $(TOP)/config/makeDbDepends.pl
+REPLACEVAR	= $(PERL) $(TOP)/config/replaceVAR.pl
+ifndef WIN32
+TOUCH		= touch
+else
+TOUCH		= $(PERL) $(TOP)/config/touch.pl
+endif
+
+#-----------------------------------------------------------------
+#	if we are not building base add base dbd dirs
+
+ifneq ($(EPICS_BASE),$(TOP))
+ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
+EPICS_DBDFLAGS += -I $(EPICS_BASE)/dbd
+endif
+endif
+
+#---------------------------------------------------------------
+#	----------------------------------------------------
+#	create names (lists) for installed things
+#	----------------------------------------------------
+
+INSTALL_BPTS = $(BPTS:%= $(INSTALL_DBD)/%)
+INSTALL_DBDS = $(DBDINSTALL:%= $(INSTALL_DBD)/%)
+INSTALL_DBDNAME = $(DBDNAME:%= $(INSTALL_DBD)/%)
+INSTALL_DATA = $(INSTALLDB:%=$(INSTALL_DB)/%)
+INSTALL_TEMPLATES = $(filter %.template,$(INSTALL_DATA))
+
+#---------------------------------------------------------------
+#	Main targets
+
+all::	install
+
+inc::	$(INSTALL_DBDS) $(INSTALL_BPTS) $(INSTALL_TEMPLATES)
+
+rebuild:: clean install
+
+install:: inc buildInstall 
+
+buildInstall:: build $(INSTALL_DATA)
+
+depends::
+
+clean::
+	@echo "Cleaning"
+	@$(RM) $(DB) $(DBDNAME) *.template *.substitutions *.db.raw \
+	*.db-stamp *.edf esiread.cnf
+
+##################################################### "Foreign" templates
+
+TEMPLATE_LINKS	= $(filter-out $(notdir $(USES_TEMPLATE)), $(USES_TEMPLATE))
+TEMPLATE_FILES	= $(filter     $(notdir $(USES_TEMPLATE)), $(USES_TEMPLATE))
+DB_STAMP	= $(patsubst %.db, %.db-stamp, $(DB))
+DB_REALTARGET	= $(patsubst %.db-stamp, %.db, $@)
+
+ifneq '$(TEMPLATE_LINKS)' ''
+build:: $(notdir $(TEMPLATE_LINKS))
+endif
+build:: $(INSTALL_DBDNAME) $(TEMPLATE_FILES) $(DB_STAMP)
+
+$(notdir $(TEMPLATE_LINKS)): %.template:
+ifndef WIN32
+	@$(RM) $(notdir $(TEMPLATE_LINKS))
+	ln -s $(TEMPLATE_LINKS) .
+# Workaround for dbLoadTemplate bug: terminate here if link target doesn't exist
+	@cat $(TEMPLATE_LINKS) > /dev/null
+else
+	@$(RM) $(notdir $(TEMPLATE_LINKS))
+	$(CP) $(TEMPLATE_LINKS) .
+endif
+
+##################################################### Inflated or plain databases
+
+$(INSTALL_DB)/%.db: %.db-stamp
+	@echo "Installing database $@"
+	@$(INSTALL) -d -m 644 $(patsubst %.db-stamp, %.db, $<) $(@D)
+
+# Must have DBDNAME defined to use dbst optimization
+ifndef DBDNAME
+DB_OPT = NO
+endif
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+.PRECIOUS: %.db.raw
+%.db-stamp: %.db.raw $(INSTALL_DBD)/$(DBDNAME)
+	@echo "Optimizing database $@"
+	$(DBST) $(INSTALL_DBD)/$(DBDNAME) $< -d > $(DB_REALTARGET)
+	@$(TOUCH) $@
+%.db-stamp: %.t.db.raw $(INSTALL_DBD)/$(DBDNAME)
+	@echo "Optimizing database $@"
+	$(DBST) $(INSTALL_DBD)/$(DBDNAME) $< -d > $(DB_REALTARGET)
+	@$(TOUCH) $@
+else
+# NO optimization => move it and keep a stamp
+%.db-stamp: %.db.raw
+	@$(MV) $< $(DB_REALTARGET)
+	@$(TOUCH) $@
+	@$(TOUCH) $<
+%.db-stamp: %.t.db.raw
+	@$(MV) $< $(DB_REALTARGET)
+	@$(TOUCH) $@
+	@$(TOUCH) $<
+endif
+
+%.t.db.raw: %.substitutions
+	@echo "Inflating database from $<"
+	@$(RM) $@
+	@$(DBLOADTEMPLATE) $< > $@
+
+##################################################### CapFast filter
+
+%.edf:: ../%.sch $(DEPSCHS)
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) $<
+
+##################################################### Substitution files
+
+$(INSTALL_DB)/%.substitutions: %.substitutions
+	@echo "Installing $@"
+	@$(INSTALL) -d -m 644 $(@F) $(@D)
+
+%.substitutions:: ../%.substitutions
+	@$(CP) $< $@
+
+ifdef CREATESUBSTITUTIONS
+%.substitutions:: $(word $(words $(CREATESUBSTITUTIONS)),$(CREATESUBSTITUTIONS))
+	@$(CREATESUBSTITUTIONS) $*
+endif
+
+# Better make it PRECIOUS (to get around make bug)
+.PRECIOUS: %.substitutions
+
+##################################################### Template databases
+
+# Installed template files (dbLoadTemplate() on IOC side)
+$(INSTALL_DB)/%.template: %.template
+	@echo "Installing $@"
+	@$(INSTALL) -d -m 644 $(@F) $(@D)
+
+%.template:: ../%.template
+	@$(CP) $< $@
+
+%.template: %.edf
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+##################################################### Flat databases
+
+%.db.raw:: ../%.db
+	$(CP) $< $@
+
+%.db.raw: %.edf
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+##################################################### DBD stuff
+
+$(INSTALL_DBD)/%: %
+	@echo "Installing $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
+
+$(INSTALL_DBD)/%:: ../%
+	@echo "Installing $@"
+	@$(INSTALL) -d -m 644 $< $(@D)
+
+bpt%.dbd: bpt%.data
+	$(RM) $@
+	$(MAKEBPT) $<
+
+bpt%.dbd:: ../bpt%.data
+	$(RM) $@
+	$(MAKEBPT) $<
+
+# Patch for old applications
+ifdef USER_DBDFLAGS
+DBDFLAGS = $(USER_DBDFLAGS)
+endif
+
+ifdef DBDEXPAND
+$(DBDNAME): ../$(DBDEXPAND)
+	@echo "Expanding dbd"
+	@$(RM) $@
+	$(DBEXPAND) $(DBDFLAGS) $< > dbExpand.tmp
+	$(MV) dbExpand.tmp $@
+endif
+
+##################################################### Dependencies
+
+DEPENDS: $(filter $(patsubst %.db, %.substitutions, $(DB)), $(wildcard *.substitutions))
+	@$(MAKEDBDEPENDS) $^
+
+-include DEPENDS

config/RULES.Host

@@ -0,0 +1,3 @@
+#RULES.Host
+
+include $(EPICS_BASE)/config/RULES.Host

config/RULES.Vx

@@ -0,0 +1,7 @@
+#RULES.Vx
+include $(EPICS_BASE)/config/RULES.Vx
+inc:: $(INSTALL_INCREC)
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile.Vx
+

config/RULES.ioc

@@ -0,0 +1,9 @@
+#RULES.ioc
+include $(EPICS_BASE)/config/RULES_DIRS
+buildInstall:: cdCommands
+
+cdCommands: Makefile $(wildcard $(TOP)/config/RELEASE*)
+	@$(PERL) $(TOP)/config/convertRelease.pl -a $(ARCH) -h $(HOST_ARCH) $@
+
+clean::
+	@$(RM) cdCommands

config/RULES.iocBoot

@@ -0,0 +1,4 @@
+#RULES.iocBoot
+DIRS += $(wildcard ioc*)
+DIRS += $(wildcard as*)
+include $(EPICS_BASE)/config/RULES_DIRS

config/RULES.munch

@@ -0,0 +1,14 @@
+MUNCH = $(PERL) $(INSTALL_LOCATION)/bin/$(HOST_ARCH)/munch.pl
+
+# The original 3.13.10 munching rule does not really work well
+
+build:: $(LIBNAME).munch
+
+buildInstall:: $(INSTALL_BIN)/$(LIBNAME).munch
+
+%.munch: %
+	$(RM) $*_ctct.o $*_ctdt.c
+	$(NM) $< | $(MUNCH) > $*_ctdt.c
+	$(GCC) -traditional $(CFLAGS) -fdollars-in-identifiers -c $(SOURCE_FLAG) $*_ctdt.c
+	$(LINK.c) $@ $< $*_ctdt.o
+

config/RULES_ARCHS

@@ -0,0 +1,2 @@
+#RULES_ARCHS
+include $(EPICS_BASE)/config/RULES_ARCHS

config/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(EPICS_BASE)/config/RULES_DIRS

config/RULES_TOP

@@ -0,0 +1,5 @@
+#RULES_TOP
+include $(EPICS_BASE)/config/RULES_TOP
+
+uninstall::
+	@$(RMDIR) $(INSTALL_DB)

config/convertRelease.pl

@@ -0,0 +1,186 @@
+eval 'exec perl -S $0 ${1+"$@"}'  # -*- Mode: perl -*-
+    if $running_under_some_shell; # convertRelease.pl
+#
+# convertRelease.pl,v 1.1.2.1 2001/09/14 19:39:15 anj Exp
+#
+# Parse config/RELEASE file(s) and generate a derived output file.
+#
+# This tool replaces makeConfigAppInclude.pl and makeIocCdCommands.pl
+# and adds consistency checks for RELEASE files.
+#
+
+use Cwd;
+use Getopt::Std;
+
+$cwd = cwd();
+$cwd =~ s/\/tmp_mnt//;	# hack for sun4
+$cwd =~ s/\\/\//g;	# hack for win32
+
+getopt "aht";
+
+if ($opt_a) {
+    $arch = $opt_a;
+} else {		# Look for O.<arch> in current path
+    $_ = $cwd;
+    ($arch) = /.*\/O.([\w-]+)$/;
+}
+
+$hostarch = $arch;
+$hostarch = $opt_h if ($opt_h);
+
+if ($opt_t) {
+    $top = $opt_t;
+} else {		# Find $top from current path
+    $top = $cwd;
+    $top =~ s/\/iocBoot.*//;
+    $top =~ s/\/config\/O\..*//;
+}
+
+unless (@ARGV == 1) {
+    print "Usage: convertRelease.pl [-a arch] [-h hostarch] [-t top] outfile\n";
+    print "   where outfile is be one of:\n";
+    print "\tcheckRelease - checks consistency with support apps\n";
+    print "\tcdCommands - generate cd path strings for IOC use\n";
+    print "\tCONFIG_APP_INCLUDE - additional build variables\n";
+    exit 2;
+}
+$outfile = $ARGV[0];
+
+# TOP refers to this application
+%macros = (TOP => $top);
+@apps   = (TOP);	# Provides the order of apps in RELEASE file
+
+# Read the RELEASE file(s)
+$relfile = "$top/config/RELEASE";
+die "Can't find config/RELEASE file" unless (-r $relfile);
+&readRelease($relfile, \%macros, \@apps);
+
+if ($hostarch) {
+    $relfile .= ".$hostarch";
+    &readRelease($relfile, \%macros, \@apps) if (-r $relfile);
+}
+
+# This is a perl switch statement:
+for ($outfile) {
+    /CONFIG_APP_INCLUDE/ and do { &configAppInclude;	last; };
+    /cdCommands/	 and do { &cdCommands;		last; };
+    /checkRelease/	 and do { &checkRelease;	last; };
+    die "Output file type \'$outfile\' not supported";
+}
+
+sub readRelease {
+    my ($file, $Rmacros, $Rapps) = @_;
+    # $Rmacros is a reference to a hash, $Rapps a ref to an array
+    my ($pre, $macro, $post, $path);
+    local *IN;
+    open(IN, $file) or die "Can't open $file: $!\n";
+    while (<IN>) {
+	chomp;
+	s/\s*#.*$//;		# Remove trailing comments
+        next if /^\s*$/;	# Skip blank lines
+	
+	# Expand all macros in the line:
+	while (($pre,$macro,$post) = /(.*)\$\((\w+)\)(.*)/, $macro ne "") {
+	    $_ = $pre . $Rmacros->{$macro} . $post;
+	}
+	
+	# Handle "<macro> = <path>"
+	($macro, $path) = /^\s*(\w+)\s*=\s*(.*)/;
+	if ($macro ne "") {
+	    $Rmacros->{$macro} = $path;
+	    push @$Rapps, $macro;
+	    next;
+	}
+	# Handle "include <path>" syntax
+	($path) = /^\s*include\s+(.*)/;
+	&readRelease($path, $Rmacros, $Rapps) if (-r $path);
+    }
+    close IN;
+}
+
+sub configAppInclude {
+    @includes = grep !/^(TOP|TEMPLATE_TOP)$/, @apps;
+    
+    unlink($outfile);
+    open(OUT,">$outfile") or die "$! creating $outfile";
+    print OUT "# Do not modify this file, changes made here will\n";
+    print OUT "# be lost when the application is next rebuilt.\n\n";
+    
+    if ($arch) {
+	foreach $app (@includes) {
+            $path = $macros{$app};
+	    next unless (-d "$path/bin/$arch");
+	    print OUT "${app}_BIN = \$($app)/bin/$arch\n";
+	}
+	foreach $app (@includes) {
+            $path = $macros{$app};
+            next unless (-d "$path/lib/$arch");
+	    print OUT "${app}_LIB = \$($app)/lib/$arch\n";
+	}
+    }
+    foreach $app (@includes) {
+        $path = $macros{$app};
+        next unless (-d "$path/include");
+	print OUT "EPICS_INCLUDES += -I\$($app)/include\n";
+    }
+    foreach $app (@includes) {
+        $path = $macros{$app};
+        next unless (-d "$path/dbd");
+        print OUT "EPICS_DBDFLAGS += -I \$($app)/dbd\n";
+    }
+    close OUT;
+}
+
+sub cdCommands {
+    die "Architecture not set (use -a option)" unless ($arch);
+    @includes = grep !/^TEMPLATE_TOP$/, @apps;
+    
+    # if -t <top> was given, substitute it in the startup path
+    $startup = $cwd;
+    $startup =~ s/.*(\/iocBoot\/.*)/$top$1/ if ($opt_t);
+    
+    unlink($outfile);
+    open(OUT,">$outfile") or die "$! creating $outfile";
+    print OUT "startup = \"$startup\"\n";
+    print OUT "appbin = \"$top/bin/$arch\"\n";	# compatibility with R3.13.1
+    
+    foreach $app (@includes) {
+        $path = $macros{$app};
+	$lcapp = lc($app);
+        print OUT "$lcapp = \"$path\"\n" if (-d $path);
+	print OUT "${lcapp}bin = \"$path/bin/$arch\"\n" if (-d "$path/bin/$arch");
+    }
+    close OUT;
+}
+
+sub checkRelease {
+    $status = 0;
+    delete $macros{TOP};
+    delete $macros{TEMPLATE_TOP};
+    
+    while (($app, $path) = each %macros) {
+	%check = (TOP => $path);
+	@order = ();
+	$relfile = "$path/config/RELEASE";
+	&readRelease($relfile, \%check, \@order) if (-r $relfile);
+	if ($hostarch) {
+	    $relfile .= ".$hostarch";
+	    &readRelease($relfile, \%check, \@order) if (-r $relfile);
+	}
+	delete $check{TOP};
+	
+	while (($parent, $ppath) = each %check) {
+	    if (exists $macros{$parent} && ($macros{$parent} ne $ppath)) {
+		print "\n" unless ($status);
+		print "Definition of $parent conflicts with $app support.\n";
+		print "In this application config/RELEASE defines\n";
+		print "\t$parent = $macros{$parent}\n";
+		print "but $app at $path has\n";
+		print "\t$parent = $ppath\n";
+		$status = 1;
+	    }
+	}
+    }
+    print "\n" if ($status);
+    exit $status;
+}

config/makeDbDepends.pl

@@ -0,0 +1,23 @@
+eval 'exec perl -S $0 ${1+"$@"}'  # -*- Mode: perl -*-
+    if $running_under_some_shell; # makeDbDepends.pl
+
+# Called from within the object directory.
+# Searches the .substitutions files (from the command line) for
+# "file xxx {" entries to create a .DEPENDS file
+
+open(OUT, ">.DEPENDS") or die "Cannot open .DEPENDS: $!";
+
+foreach $file (@ARGV) {
+    open(IN, "<$file") or die "Cannot open $file: $!";
+    @substfile = <IN>;
+    close IN or die "Cannot close $file: $!";
+
+    @depends = grep { s/^\s*file\s*(.*)\s*\{.*$/\1/ } @substfile;
+    chomp @depends;
+
+    if (@depends) {
+	$file =~ s/\.substitutions/\.t.db.raw/;
+	print OUT "${file}:: @depends\n";
+    }
+}
+close OUT or die "Cannot close $file: $!";

config/replaceVAR.pl

@@ -0,0 +1,12 @@
+eval 'exec perl -S $0 ${1+"$@"}'  # -*- Mode: perl -*-
+    if $running_under_some_shell; # replaceVAR.pl
+
+# Called from within the object directory
+# Replaces VAR(xxx) with $(xxx)
+# and      VAR_xxx_ with $(xxx)
+
+while (<STDIN>) {
+    s/VAR\(/\$\(/g;
+    s/VAR_([^_]*)_/\$\($1\)/g;
+    print;
+}

config/touch.pl

@@ -0,0 +1,31 @@
+#!/usr/bin/perl
+#
+#	unix touch in Perl
+
+use File::Copy;
+use File::Basename;
+
+sub Usage
+{
+	my ($txt) = @_;
+
+	print "Usage:\n";
+	print "\ttouch file [ file2 file3 ...]\n";
+	print "\nError: $txt\n" if $txt;
+
+	exit 2;
+}
+
+# need at least one arg: ARGV[0]
+Usage("need more args") if $#ARGV < 0;
+
+@targets=@ARGV[0..$#ARGV];
+
+foreach $file ( @targets )
+{
+    open(OUT,">$file") or die "$! creating $file";
+    #print OUT "NUL\n";
+    close OUT;
+}
+
+# EOF touch.pl

configure/CONFIG

@@ -0,0 +1,14 @@
+#CONFIG
+include $(TOP)/configure/CONFIG_APP
+# Add any changes to make definitions here
+
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+#CROSS_COMPILER_TARGET_ARCHS = 
+
+# Use this when your IOC and the host use different paths
+# to access the application. Typically this will be 
+# used with the Microsoft FTP server or with NFS mounts. Use
+# is indicated by failure of the cdCommands script on
+# vxWorks. You must rebuild in the iocBoot directory 
+# before this takes effect.
+#IOCS_APPL_TOP = <the top of the application as seen by the IOC>

configure/CONFIG_APP

@@ -0,0 +1,27 @@
+# CONFIG_APP
+
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH)
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+
+ifneq ($(wildcard $(EPICS_BASE)/configure),)
+CONFIG=$(EPICS_BASE)/configure
+else
+CONFIG=$(EPICS_BASE)/config
+DIRS += config
+endif
+include $(CONFIG)/CONFIG
+
+INSTALL_LOCATION = $(TOP)
+ifdef INSTALL_LOCATION_APP
+INSTALL_LOCATION = $(INSTALL_LOCATION_APP)
+endif
+
+ifdef T_A
+-include $(TOP)/configure/O.$(T_A)/CONFIG_APP_INCLUDE
+endif
+
+# dbst based database optimization (default: NO)
+DB_OPT = NO
+HOST_OPT=NO

configure/Makefile

@@ -0,0 +1,15 @@
+# Makefile
+
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+# Set the following to NO to disable consistency checking of
+# the support applications defined in $(TOP)/configure/RELEASE
+CHECK_RELEASE = YES
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES
+

configure/RELEASE

@@ -0,0 +1,29 @@
+#RELEASE Location of external products
+# Run "gnumake clean uninstall install" in the application
+# top directory each time this file is changed.
+#
+# NOTE: The build does not check dependancies on files
+# external to this application. Thus you should run
+# "gnumake clean uninstall install" in the top directory
+# each time EPICS_BASE, SNCSEQ, or any other external
+# module defined in the RELEASE file is rebuilt.
+
+TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
+
+# If you don't want to install into $(TOP) then
+# define INSTALL_LOCATION_APP here
+#INSTALL_LOCATION_APP=<fullpathname>
+
+EPICS_BASE=/usr/local/epics/base-3.14.12
+ASYN=~/top/asyn4-30
+CALC=~/top/SynApps/calc-2-8
+PCRE=~/top/pcre-7.2
+
+#3.14.8 does not understand ~
+#EPICS_BASE=/usr/local/epics/base-3.14.8
+#ASYN=/afs/psi.ch/user/z/zimoch/top/asyn-4.10
+
+##Example 3.13 build
+#EPICS_BASE=/usr/local/epics/base-3.13.10
+#ASYN=/afs/psi.ch/user/z/zimoch/top_3.13/4-6
+#COMPAT=/afs/psi.ch/user/z/zimoch/top_3.13

configure/RULES

@@ -0,0 +1,9 @@
+#CONFIG
+ifneq ($(wildcard $(EPICS_BASE)/configure),)
+include $(EPICS_BASE)/configure/RULES
+else
+include $(EPICS_BASE)/config/RULES_ARCHS
+endif
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

documentation/formats.html

@@ -266,6 +266,11 @@ The empty string matches.
 With the <code>#</code> flag <code>%s</code> matches a sequence of not-null
 characters instead of non-whitespace characters.
 </p>
+<p>
+With the <code>0</code> flag <code>%s</code> pads with 0 bytes instead of
+spaces.
+</p>
+
 
 <a name="cset"></a>
 <h2>6. Standard Charset STRING Converter (<code>%[<em>charset</em>]</code>)</h2>
@@ -449,8 +454,17 @@ With the <code>#</code> flag, the byte order is changed to <em>little
 endian</em>, i.e. least significant byte first.
 </p>
 <p>
-The <code>0</code> flag changes the checksum representation from
-binary to hexadecimal ASCII (2 bytes per checksum byte).
+The <code>0</code> flag changes the checksum representation to
+to hexadecimal ASCII (2 chars per checksum byte).
+</p>
+<p>
+The <code>-</code> flag changes the checksum representation to
+"poor man's hex": 0x30 ... 0x3f (2 chars per checksum byte).
+</p>
+<p>
+The <code>+</code> flag changes the checksum representation to
+decimal ASCII (formatted with %d).
+</p>
 <!--
 In output, the case of the ASCII checksum matches the case of first
 letter of the function name.
@@ -562,10 +576,15 @@ in architecture specific RELEASE.Common.<em>arch</em> files.
 </div>
 <p>
 If the regular expression is not anchored, i.e. does not start with
-<code>^</code>, leading non-matching input is skipped. 
+<code>^</code>, leading non-matching input is skipped.
+To match in multiline mode (across newlines) add <code>(?m)</code>
+at the beginning of the pattern.
+To match case insensitive, add <code>(?i)</code>.
+</p>
+<p>
 A maximum of <em>width</em> bytes is matched, if specified.
 If <em>precision</em> is given, it specifies the sub-expression whose match
-is retuned.
+is returned.
 Otherwise the complete match is returned.
 In any case, the complete match is consumed from the input buffer.
 If the expression contains a <code>/</code> it must be escaped like <code>\/</code>.

documentation/makepdf

@@ -1,3 +1,11 @@
+#/bin/sh
+if ! wkhtmltopdf -V >/dev/null 2>&1
+then
+    echo "wkhtmltopdf not installed."
+    echo "See https://wkhtmltopdf.org"
+    exit 1
+fi >&2
+
 PAGES="
 index.html
 setup.html

documentation/scalcout.html

@@ -29,7 +29,7 @@ before the final <code>return(0)</code>:
 </p>
 <pre class="box">
         if(pscalcoutDSET->init_record ) {
-	    return (*pscalcoutDSET->init_record)(pcalc);
+            return (*pscalcoutDSET->init_record)(pcalc);
         }
 </pre>
 

documentation/stream.css

@@ -20,6 +20,7 @@ pre {
     border:1px solid #000000;
     white-space:pre;
     margin:2ex;
+    page-break-inside:avoid;
 }
 
 kbd {

documentation/tipsandtricks.html

@@ -260,7 +260,7 @@ When asked "<code>CURRENT?</code>", the device send something like
 </p>
 <p>
 <code>
-read_current {out "CURRENT?"; in "CURRENT %f A"; @mismatch {in "%(\1)39c";}}
+read_current {out "CURRENT?"; in "CURRENT %f A"; @mismatch {in "%(\$1)39c";}}
 </code>
 </p>
 <p>

src/CONFIG_STREAM

@@ -3,17 +3,17 @@
 
 # You may add more record interfaces
 # This requires the naming conventions
-# dev$(RECORD)Stream.c
+# dev$(RECORDTYPE)Stream.c
 
-RECORDS += ao ai
-RECORDS += bo bi
-RECORDS += mbbo mbbi
-RECORDS += mbboDirect mbbiDirect
-RECORDS += longout longin
-RECORDS += stringout stringin
-RECORDS += waveform
-RECORDS += calcout
-RECORDS += aai aao
+RECORDTYPES += ao ai
+RECORDTYPES += bo bi
+RECORDTYPES += mbbo mbbi
+RECORDTYPES += mbboDirect mbbiDirect
+RECORDTYPES += longout longin
+RECORDTYPES += stringout stringin
+RECORDTYPES += waveform
+RECORDTYPES += calcout
+RECORDTYPES += aai aao
 
 # Do you have synApps and want support for scalcout?
 # Then define CALC or SYNAPPS in your RELEASE file
@@ -21,18 +21,23 @@ RECORDS += aai aao
 # Due to strange cross dependencies in synApps
 # you have to build the 'sscan' and 'genSub'
 # modules before building 'calc'.
-# See doc/scalcout.html for a required fix in scalcout.
-
-SYNAPPS_RECORDS += scalcout
+# The 'calc' version must be 2-4 or higher.
+# Up to version 2-6 (synApps 5.1) the 'calc' module needs a fix.
+# See doc/scalcout.html for details.
+ifneq ($(words $(CALC) $(SYNAPPS)), 0)
+RECORDTYPES += scalcout
+endif
 
 # You may add more bus interfaces
 # This requires the naming convention
 # $(BUS)Interface.cc
-# asynDriver interface is added automatically
-# if ASYN is defined in your RELEASE file.
+# asynDriver interface is added if ASYN is defined in your RELEASE file.
 
 BUSSES += Debug
 BUSSES += Dummy
+ifdef ASYN
+BUSSES += AsynDriver
+endif
 
 # You may add more format converters
 # This requires the naming convention

src/Makefile

@@ -18,7 +18,7 @@
 #                                                              #
 ################################################################
 
-TOP=../..
+TOP:=../$(TOP)
 
 # Look if we have EPICS R3.13 or R3.14
 ifeq ($(wildcard $(TOP)/configure),)
@@ -40,13 +40,8 @@ DBD += $(LIBRARY_DEFAULT).dbd
 
 ifdef ASYN
 LIB_LIBS += asyn
-BUSSES += AsynDriver
-endif
-
-ifdef T_A
-ifndef BUSSES
-$(error No bus interface defined! Didn't you set ASYN in your RELEASE file?)
-endif
+else
+$(warning Asyn not included! Didn't you set ASYN in your RELEASE file?)
 endif
 
 ifeq ($(LOADABLE_MODULE),YES)
@@ -54,7 +49,7 @@ SRCS += $(LIBRARY_DEFAULT)_registerRecordDeviceDriver.cpp
 endif 
 SRCS += $(BUSSES:%=%Interface.cc)
 SRCS += $(FORMATS:%=%Converter.cc)
-SRCS += $(RECORDS:%=dev%Stream.c)
+SRCS += $(RECORDTYPES:%=dev%Stream.c)
 SRCS += $(STREAM_SRCS)
 
 # find system wide or local PCRE header and library
@@ -89,9 +84,9 @@ streamReferences: ../CONFIG_STREAM
 	$(PERL) ../makeref.pl Interface $(BUSSES) > $@
 	$(PERL) ../makeref.pl Converter $(FORMATS) >> $@
 
-# create stream.dbd from all RECORDS
+# create stream.dbd from all RECORDTYPES
 $(COMMON_DIR)/$(LIBRARY_DEFAULT).dbd: ../CONFIG_STREAM
-	$(PERL) ../makedbd.pl $(RECORDS) > $@
+	$(PERL) ../makedbd.pl $(RECORDTYPES) > $@
 
 $(LIBRARY_DEFAULT).dbd$(DEP): ../CONFIG_STREAM
 	echo $(LIBRARY_DEFAULT).dbd: $< > $@

src/Makefile.Host

@@ -18,14 +18,11 @@
 #                                                              #
 ################################################################
 
-TOP = ../../..
+TOP := ../../$(TOP)
 
 include $(TOP)/config/CONFIG_APP
 include ../CONFIG_STREAM
 
-# In 3.13, calcout has no device support
-RECORDS_3_13 = $(filter-out calcout,$(RECORDS))
-
 DBDNAME = stream.dbd
 
 INC += devStream.h
@@ -35,8 +32,9 @@ INC += devStream.h
 CONFIGS = RULES.munch
 SCRIPTS = munch.pl
 
-include $(TOP)/config/RULES.Host
+include $(EPICS_BASE)/config/RULES.Host
 
-# create stream.dbd from all RECORDS
+# create stream.dbd from all RECORDTYPES
+# In 3.13, calcout has no device support
 stream.dbd: ../CONFIG_STREAM
-	$(PERL) ../makedbd.pl -3.13 $(RECORDS_3_13) > $@
+	$(PERL) ../makedbd.pl -3.13 $(filter-out calcout,$(RECORDTYPES)) > $@

src/Makefile.Vx

@@ -18,29 +18,23 @@
 #                                                              #
 ################################################################
 
-TOP = ../../..
+TOP := ../../$(TOP)
 
 include $(TOP)/config/CONFIG_APP
 include ../CONFIG_STREAM
 
 LIBNAME = streamLib
 
-# In 3.13, calcout has no device support
-RECORDS_3_13 = $(filter-out calcout,$(RECORDS))
-
-ifdef ASYN
-BUSSES += AsynDriver
-endif
-
 SRCS.cc += $(patsubst %,../%,$(filter %.cc,$(STREAM_SRCS)))
 SRCS.cc += $(BUSSES:%=../%Interface.cc)
 SRCS.cc += $(FORMATS:%=../%Converter.cc)
 SRCS.c += $(patsubst %,../%,$(filter %.c,$(STREAM_SRCS)))
-SRCS.c += $(RECORDS_3_13:%=../dev%Stream.c)
+# In 3.13, calcout has no device support
+SRCS.c += $(patsubst %,../dev%Stream.c,$(filter-out calcout,$(RECORDTYPES)))
 
 LIBOBJS = $(patsubst ../%,%.o,$(basename $(SRCS.cc) $(SRCS.c)))
 
-include $(TOP)/config/RULES.Vx
+include $(EPICS_BASE)/config/RULES.Vx
 include $(TOP)/config/RULES.munch
 
 build:: depends

src/StreamBuffer.cc

@@ -26,8 +26,7 @@
 
 #if defined(__vxworks) || defined(vxWorks) || defined(_WIN32) || defined(__rtems__)
 // These systems have no vsnprintf
-#include <epicsStdio.h>
-#define vsnprintf epicsVsnprintf
+#define vsnprintf(p,l,f,v) vsprintf(p,f,v)
 #endif
 
 #define P PRINTF_SIZE_T_PREFIX
@@ -314,7 +313,7 @@ dump() const
     StreamBuffer result(256+cap*5);
     result.append("\033[0m");
     size_t i;
-    result.print("%"P"d,%"P"d,%"P"d:\033[37m", offs, len, cap);
+    result.print("%" P "d,%" P "d,%" P "d:\033[37m", offs, len, cap);
     for (i = 0; i < cap; i++)
     {
         if (i == offs) result.append("\033[34m[\033[0m");

src/StreamBuffer.h

@@ -23,6 +23,8 @@
 #include <string.h>
 #include <stdlib.h>
 
+#include <sys/types.h>
+
 #ifndef __GNUC__
 #define __attribute__(x)
 #endif

src/StreamCore.cc

@@ -997,7 +997,7 @@ readCallback(StreamIoStatus status,
             finishProtocol(ReplyTimeout);
             return 0;
         case StreamIoFault:
-            error("%s: I/O error after reading %"P"d byte%s: \"%s%s\"\n",
+            error("%s: I/O error after reading %" P "d byte%s: \"%s%s\"\n",
                 name(),
                 inputBuffer.length(), inputBuffer.length()==1 ? "" : "s",
                 inputBuffer.length() > 20 ? "..." : "",
@@ -1006,7 +1006,7 @@ readCallback(StreamIoStatus status,
             return 0;
     }
     inputBuffer.append(input, size);
-    debug("StreamCore::readCallback(%s) inputBuffer=\"%s\", size %"P"d\n",
+    debug("StreamCore::readCallback(%s) inputBuffer=\"%s\", size %" P "d\n",
         name(), inputBuffer.expand()(), inputBuffer.length());
     if (*activeCommand != in_cmd)
     {
@@ -1657,7 +1657,11 @@ timerCallback()
 bool StreamCore::
 evalExec()
 {
-    formatOutput();
+    if (!formatOutput())
+    {
+        finishProtocol(FormatError);
+        return false;
+    }
     debug ("StreamCore::evalExec: command = \"%s\"\n", outputLine.expand()());
     // release bus
     if (flags & BusOwner)

src/StreamEpics.cc

@@ -1121,7 +1121,7 @@ bool Stream::
 matchValue(const StreamFormat& format, const void* fieldaddress)
 {
     // this function must increase consumedInput
-    long consumed;
+    long consumed = 0;
     long lval;
     double dval;
     char* buffer;

src/StreamFormat.h

@@ -31,7 +31,7 @@ typedef enum {
     skip_flag    = 0x20,
     default_flag = 0x40,
     compare_flag = 0x80,
-    fix_width_flag = 0x100,
+    fix_width_flag = 0x100
 } StreamFormatFlag;
 
 typedef enum {

src/StreamFormatConverter.cc

@@ -442,10 +442,11 @@ int StdStringConverter::
 parse(const StreamFormat& fmt, StreamBuffer& info,
     const char*& source, bool scanFormat)
 {
-    if (fmt.flags & (sign_flag|zero_flag))
+    if (fmt.flags & sign_flag)
     {
-        error("Use of modifiers '+', '0'"
-            "not allowed with %%s conversion\n");
+        error("Use of modifier '+'"
+            "not allowed with %%%c conversion\n",
+            fmt.conv);
         return false;
     }
     if (scanFormat && fmt.prec >= 0)
@@ -463,7 +464,22 @@ parse(const StreamFormat& fmt, StreamBuffer& info,
 bool StdStringConverter::
 printString(const StreamFormat& fmt, StreamBuffer& output, const char* value)
 {
-    output.print(fmt.info, value);
+    if (fmt.flags & zero_flag && fmt.width)
+    {
+        size_t l;
+        if (fmt.prec > -1)
+        {
+            char* p = (char*)memchr(value, 0, fmt.prec);
+            if (p) l = p - value;
+            else l = fmt.prec;
+        }
+        else l = strlen(value);
+        if (!(fmt.flags & left_flag)) output.append('\0', fmt.width-l);
+        output.append(value, l);
+        if (fmt.flags & left_flag) output.append('\0', fmt.width-l);
+    }
+    else
+        output.print(fmt.info, value);
     return true;
 }
 

src/devStream.h

@@ -22,8 +22,8 @@
 #define devStream_h
 
 #define STREAM_MAJOR 2
-#define STREAM_MINOR 7
-#define STREAM_PATCHLEVEL 10
+#define STREAM_MINOR 8
+#define STREAM_PATCHLEVEL 0
 
 #if defined(__vxworks) || defined(vxWorks)
 #include <vxWorks.h>

src/devaiStream.c

@@ -18,34 +18,28 @@
 *                                                              *
 ***************************************************************/
 
-#include <math.h>
-#include <menuConvert.h>
 #include <aiRecord.h>
 #include "devStream.h"
-#include <epicsExport.h>
-
-#ifdef vxWorks
+#ifdef EPICS_3_13
 #include <private/mathP.h>
 #define isinf(x) isInf(x)
 #define isnan(x) isNan(x)
+#else
+#include <epicsMath.h>
 #endif
+#include <epicsExport.h>
 
 static long readData (dbCommon *record, format_t *format)
 {
     aiRecord *ai = (aiRecord *) record;
+    double val;
 
     switch (format->type)
     {
         case DBF_DOUBLE:
         {
-            double val;
             if (streamScanf (record, format, &val)) return ERROR;
-            if (ai->aslo != 0.0 && ai->aslo != 1.0) val *= ai->aslo;
-            val += ai->aoff;
-            if (!(ai->smoo == 0.0 || ai->init || ai->udf || isinf(ai->val) || isnan(ai->val)))
-                val = ai->val * ai->smoo + val * (1.0 - ai->smoo);
-            ai->val = val;
-            return DO_NOT_CONVERT;
+            break;
         }
         case DBF_ULONG:
         case DBF_LONG:
@@ -53,51 +47,56 @@ static long readData (dbCommon *record, format_t *format)
             long rval;
             if (streamScanf (record, format, &rval)) return ERROR;
             ai->rval = rval;
-            if (ai->linr == menuConvertNO_CONVERSION)
+            if (ai->linr == 0)
             {
                 /* allow integers with more than 32 bits */
-                double val;
                 if (format->type == DBF_ULONG)
                     val = (unsigned long)rval;
                 else    
                     val = rval;
-                if (ai->aslo != 0.0 && ai->aslo != 1.0) val *= ai->aslo;
-                ai->val = val + ai->aoff;
-                return DO_NOT_CONVERT;
+                break;
             }
             return OK;
         }
+        default:
+            return ERROR;
     }
-    return ERROR;
+    if (ai->aslo != 0.0 && ai->aslo != 1.0) val *= ai->aslo;
+    val += ai->aoff;
+    if (!(ai->smoo == 0.0 || ai->init || ai->udf || isinf(ai->val) || isnan(ai->val)))
+        val = ai->val * ai->smoo + val * (1.0 - ai->smoo);
+    ai->val = val;
+    return DO_NOT_CONVERT;
 }
 
 static long writeData (dbCommon *record, format_t *format)
 {
     aiRecord *ai = (aiRecord *) record;
 
+    double val = ai->val - ai->aoff;
+    if (ai->aslo != 0.0 && ai->aslo != 1.0) val /= ai->aslo;
+
     switch (format->type)
     {
         case DBF_DOUBLE:
         {
-            double val = ai->val - ai->aoff;
-            if (ai->aslo != 0.0 && ai->aslo != 1.0) val /= ai->aslo;
             return streamPrintf (record, format, val);
         }
         case DBF_ULONG:
         {
-            if (ai->linr == menuConvertNO_CONVERSION)
+            if (ai->linr == 0)
             {
                 /* allow more bits than 32 */
-                return streamPrintf (record, format, (unsigned long)ai->val);
+                return streamPrintf (record, format, (unsigned long)val);
             }
             return streamPrintf (record, format, (unsigned long)ai->rval);
         }
         case DBF_LONG:
         {
-            if (ai->linr == menuConvertNO_CONVERSION)
+            if (ai->linr == 0)
             {
                 /* allow more bits than 32 */
-                return streamPrintf (record, format, (long)ai->val);
+                return streamPrintf (record, format, (long)val);
             }
             return streamPrintf (record, format, (long)ai->rval);
         }

src/devaoStream.c

@@ -18,7 +18,6 @@
 *                                                              *
 ***************************************************************/
 
-#include <menuConvert.h>
 #include <aoRecord.h>
 #include "devStream.h"
 #include <epicsExport.h>
@@ -26,16 +25,14 @@
 static long readData (dbCommon *record, format_t *format)
 {
     aoRecord *ao = (aoRecord *) record;
+    double val;
 
     switch (format->type)
     {
         case DBF_DOUBLE:
         {
-            double val;
             if (streamScanf (record, format, &val)) return ERROR;
-            if (ao->aslo != 0.0 && ao->aslo != 1.0) val *= ao->aslo;
-            ao->val = val + ao->aoff;
-            return DO_NOT_CONVERT;
+            break;
         }
         case DBF_ULONG:
         case DBF_LONG:
@@ -44,22 +41,23 @@ static long readData (dbCommon *record, format_t *format)
             if (streamScanf (record, format, &rval)) return ERROR;
             ao->rbv = rval;
             ao->rval = rval;
-            if (ao->linr == menuConvertNO_CONVERSION)
+            if (ao->linr == 0)
             {
                 /* allow integers with more than 32 bits */
-                double val;
                 if (format->type == DBF_ULONG)
                     val = (unsigned long)rval;
                 else    
                     val = rval;
-                if (ao->aslo != 0.0 && ao->aslo != 1.0) val *= ao->aslo;
-                ao->val = val + ao->aoff;
-                return DO_NOT_CONVERT;
+                break;
             }
             return OK;
         }
+        default:
+            return ERROR;
     }
-    return ERROR;
+    if (ao->aslo != 0.0 && ao->aslo != 1.0) val *= ao->aslo;
+    ao->val = val + ao->aoff;
+    return DO_NOT_CONVERT;
 }
 
 static long writeData (dbCommon *record, format_t *format)
@@ -77,7 +75,7 @@ static long writeData (dbCommon *record, format_t *format)
         }
         case DBF_ULONG:
         {
-            if (ao->linr == menuConvertNO_CONVERSION)
+            if (ao->linr == 0)
             {
                 /* allow integers with more than 32 bits */
                 return streamPrintf (record, format, (unsigned long)val);
@@ -86,7 +84,7 @@ static long writeData (dbCommon *record, format_t *format)
         }
         case DBF_LONG:
         {
-            if (ao->linr == menuConvertNO_CONVERSION)
+            if (ao->linr == 0)
             {
                 /* allow integers with more than 32 bits */
                 return streamPrintf (record, format, (long)val);

src/devmbboDirectStream.c

@@ -81,7 +81,7 @@ static long initRecord (dbCommon *record)
    Thus make sure the record is never left in INVALID_ALARM status.
 */
 
-static long write(dbCommon *record)
+static long write_mbbo(dbCommon *record)
 {
     long status = streamWrite(record);
     if (record->nsev == INVALID_ALARM) record->nsev = MAJOR_ALARM;
@@ -102,7 +102,7 @@ struct {
     streamInit,
     initRecord,
     streamGetIointInfo,
-    write
+    write_mbbo
 };
 
 epicsExportAddress(dset,devmbboDirectStream);

src/devwaveformStream.c

@@ -193,6 +193,7 @@ static long writeData (dbCommon *record, format_t *format)
                 break;
             }
             case DBF_LONG:
+            case DBF_ULONG:
             case DBF_ENUM:
             {
                 switch (wf->ftvl)

srcSynApps/Makefile

@@ -1,23 +0,0 @@
-TOP=../..
-
-include $(TOP)/configure/CONFIG
-
--include ../src/CONFIG_STREAM
--include ../../src/CONFIG_STREAM
-
-LIBRARY_DEFAULT = streamSynApps
-
-DBD += $(LIBRARY_DEFAULT).dbd
-
-ifeq ($(LOADABLE_MODULE),YES)
-SRCS += $(LIBRARY_DEFAULT)_registerRecordDeviceDriver.cpp
-endif 
-SRCS += $(SYNAPPS_RECORDS:%=dev%Stream.c)
-
-LIB_LIBS += stream $(EPICS_BASE_IOC_LIBS)
-
-include $(TOP)/configure/RULES
-
-# create streamSynApps.dbd from all SYNAPPS_RECORDS
-$(COMMON_DIR)/$(LIBRARY_DEFAULT).dbd: ../../src/CONFIG_STREAM
-	$(PERL) ../../src/makedbd.pl $(SYNAPPS_RECORDS) > $@

streamApp/Makefile

@@ -1,4 +1,4 @@
-TOP=../..
+TOP:=../$(TOP)
 
 # Look if we have EPICS R3.13 or R3.14
 ifeq ($(wildcard $(TOP)/configure),)
@@ -20,7 +20,7 @@ streamApp_DBD += base.dbd
 
 # In 3.14.12 aaiRecord.dbd and aaoRecord.dbd are part of base.dbd
 # In earlier versions, these records are buggy and not included by default
-#streamApp_DBD += aaiRecord.dbd aaoRecord.dbd
+streamApp_DBD += aaiRecord.dbd aaoRecord.dbd
 
 PROD_SRCS += streamApp_registerRecordDeviceDriver.cpp
 PROD_SRCS_DEFAULT = streamAppMain.cc
@@ -41,11 +41,9 @@ endif
 ifneq ($(words $(CALC) $(SYNAPPS)), 0)
 # With synApps scalcout record
 streamApp_DBD += calcSupport.dbd
-streamApp_DBD += streamSynApps.dbd
 PROD_LIBS += calc
 # older calc versions require sscan
 #PROD_LIBS += sscan
-PROD_LIBS_DEFAULT += streamSynApps
 endif
 
 streamApp_DBD += stream.dbd
@@ -68,13 +66,7 @@ CPPFLAGS += -DDEBUGFILE=StreamDebug.log
 
 include $(TOP)/configure/RULES
 
-ifeq ($(BASE_3_14), YES)
-clean:: myclean
-else
-clean: myclean
-endif
-
-myclean:
+clean::
 	$(RM) core* StreamDebug.log
 
 endif

streamApp/Makefile.Host

@@ -1,8 +1,5 @@
-TOP = ../../..
+TOP := ../../$(TOP)
 
 include $(TOP)/config/CONFIG_APP
 
-DBDEXPAND = streamAppInclude-3-13.dbd
-DBDNAME = streamApp.dbd
-
-include $(TOP)/config/RULES.Host
+include $(EPICS_BASE)/config/RULES.Host

streamApp/Makefile.Vx

@@ -1,19 +1,24 @@
-TOP = ../../..
+TOP := ../../$(TOP)
 
 include $(TOP)/config/CONFIG_APP
 
 LIBNAME = streamApp
 
-LDLIBS += $(COMPAT_BIN)/compatLib
-LDLIBS += $(ASYN_BIN)/asynLib
-LDLIBS += $(INSTALL_BIN)/streamLib
+LDLIBS += $(TOP)/bin/$(T_A)/streamLib
+LDLIBS += $(ASYN)/bin/$(T_A)/asynLib
+LDLIBS += $(COMPAT)/bin/$(T_A)/compatLib
 
 include ../base-3-13LIBOBJS
 
-# Write StreamDevice debug output to this file
-CPPFLAGS += -DDEBUGFILE=StreamDebug.log
+streamApp_DBD += base-3-13.dbd
+streamApp_DBD += stream.dbd
+DBDNAME = streamApp.dbd
+DBDEXPAND = streamAppInclude-3-13.dbd
 
-include $(TOP)/config/RULES.Vx
+# Write StreamDevice debug output to this file
+#CPPFLAGS += -DDEBUGFILE=StreamDebug.log
+
+include $(EPICS_BASE)/config/RULES.Vx
 include $(TOP)/config/RULES.munch
 
 # Rebuild when  LIBOBJS change