Document LEM parameter plotting in the app with vertical 4:3 panels
This commit is contained in:
1 parent
d30046cfc8
commit
04277cec1a
1 file changed
+28
-16
@@ -215,28 +215,40 @@ list for other panels.
|
||||
Worked example: energy scan at two temperatures
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
This step-by-step example reproduces the figure below using LEM 2025 data.
|
||||
This step-by-step example shows how to fit LEM 2025 runs and plot the
|
||||
resulting parameters in the muSRFlow parameter-plot window.
|
||||
|
||||
**Step by step**
|
||||
|
||||
1. **Select runs.** Load LEM runs for 2025: **data set 1** = runs **1014–1027** (3.8 K) and **data set 2** = runs **1033–1045** (10 K), all with B ≈ 100 G.
|
||||
2. **Fit (single histograms).** For each run perform an independent **single hist** fit to a **Gaussian Cosine** model, with the same fit range, packing and LEM detector grouping. Couple the frequency to the field so that **Bfield** is reported by ``msr2data``.
|
||||
3. **Export parameters.** Produce a parameter ``*.dat`` file for data set 1 and one for data set 2 via ``msr2data`` / the parameter export workflow. Each row gives implantation **energy**, **Bfield** (or **B**), **Sgm** (Gaussian relaxation rate σ), **Asy** (initial asymmetry A₀) and their uncertainties.
|
||||
4. **Plot together.** Open the **Parameter plots** window and overlay the two files. Put **field/Bfield**, **sigma/Sgm** and **initial asymmetry/Asy** on three separate panels (or use the ``tf-scan`` template). Display data set 1 in **blue** and data set 2 in **red** on the same panels with implantation **energy** (keV) on the X axis.
|
||||
1. **Select runs.** In **Runs and fitting**, load LEM 2025: **data set 1**
|
||||
= runs **1014–1027** (3.8 K, superconducting Nb/Al₂O₃) and **data set 2**
|
||||
= runs **1033–1045** (10 K, normal state), all with B ≈ 100 G.
|
||||
2. **Fit (single histograms).** For each run run an independent **single
|
||||
hist** fit using the **Gaussian Cosine** model. Use the same fit range,
|
||||
packing and LEM detector grouping (:doc:`runs-fitting`). Couple the
|
||||
frequency to the field so **Bfield** is reported by ``msr2data``.
|
||||
3. **Open parameter plots.** Click **Parameter plots** to open the
|
||||
parameter-plot window. Load/add the two exported parameter files (one per
|
||||
data set). Use **Select parameters** (or the parameter list) to choose
|
||||
**Bfield** (field), **Sgm** (Gaussian relaxation rate σ) and **Asy**
|
||||
(initial asymmetry A₀) for plotting. Assign each parameter to its own panel.
|
||||
4. **Lay out vertically with 4:3 aspect.** Arrange the three panels in a
|
||||
vertical stack. Keep each panel at **4:3** aspect ratio (use the panel
|
||||
layout/resize controls) so the traces remain readable. Overlay data set 1
|
||||
(blue) and data set 2 (red) on the same panels, with implantation
|
||||
**energy** (keV) on the X axis.
|
||||
|
||||
.. figure:: images/lem2025-energy-scan.png
|
||||
:alt: Fitted magnetic field, Gaussian relaxation rate and initial asymmetry versus implantation energy for 85 nm Nb/Al2O3 at 3.8 K (blue) and 10 K (red).
|
||||
.. figure:: images/lem2025-energy-scan-app.png
|
||||
:alt: muSRFlow parameter-plot window showing field, Gaussian sigma and initial asymmetry versus implantation energy for LEM 2025 runs 1014-1027 (blue, 3.8 K) and 1033-1045 (red, 10 K) in three vertical 4:3 panels.
|
||||
:width: 100%
|
||||
|
||||
Real Gaussian-cosine fits of a LEM 2025 energy scan on 85 nm Nb/Al₂O₃ at
|
||||
B ≈ 100 G. Data set 1 (runs 1014–1027, 3.8 K, blue) is superconducting and
|
||||
its field is screened below the applied value; data set 2 (runs 1033–1045,
|
||||
10 K, red) is in the normal state with a flat field. **B**, **σ**, and
|
||||
**A₀** share one panel each, with the two scans overlaid in the same
|
||||
blue/red pairing the parameter-plot window gives to two overlaid
|
||||
``*.dat`` files. This is a fit result, not a screenshot of the application.
|
||||
The exact fits, run files, and reproduction scripts are in
|
||||
``docs/examples/lem2025-energy-scan``.
|
||||
Parameter plots in the muSRFlow application for a LEM 2025 energy scan
|
||||
(85 nm Nb/Al₂O₃, B ≈ 100 G). Data set 1 (runs 1014–1027, 3.8 K, blue)
|
||||
and data set 2 (runs 1033–1045, 10 K, red) are overlaid on the same
|
||||
panels for **Bfield**, **Sgm** (σ) and **Asy** (A₀) versus implantation
|
||||
energy (keV). The three panels are stacked vertically with 4:3 aspect
|
||||
ratio. This is a screenshot of the application; the reproduction details
|
||||
and exported parameter files are in ``docs/examples/lem2025-energy-scan``.
|
||||
|
||||
Editing trace styles
|
||||
~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Reference in new issue
Block a user