Script execution

script/put_test.py

@@ -0,0 +1,54 @@
+import datetime
+import time
+
+from datetime import datetime
+
+#ticks = time.time()
+#print "Number of ticks since 12:00am, January 1, 1970:", ticks
+
+dt = datetime.now()
+print "datetime.now at start", dt
+
+
+caput ("X12SA-OP-BPM6:Acquire", "Stop") #stops the acquisition
+#pico_amp_6.stop()
+dt = datetime.now()
+print "stopping", dt
+
+#to configure measuring parameters:
+
+#caput ("X12SA-OP-BPM6:AcquireMode" ,"Continuous")
+
+caput ("X12SA-OP-BPM6:Range", "+- 2.5 nA" ) #(or bigger with beam )
+
+#caput ("X12SA-OP-BPM6:Geometry", "Square")
+
+#caput ("X12SA-OP-BPM6:ValuesPerRead", 1)
+
+caput ("X12SA-OP-BPM6:AveragingTime",  0.1)
+
+dt = datetime.now()
+print "datetime.now after 2 puts", dt
+
+#caput ("X12SA-OP-BPM6:NumChannels", "4")
+
+#caput ("X12SA-OP-BPM6:ReadFormat", "Binary")
+
+#caput ("X12SA-OP-BPM6:TriggerMode", "Ext. trig.") #if it should wait for the HW Trigger
+
+#caput ("X12SA-OP-BPM6:TriggerMode", "Free run" ) #without HW Trigger
+
+#caput ("X12SA-OP-BPM6:Resolution", "16 bits" )
+
+#caput ("X12SA-OP-BPM6:TS:TSAveragingTime",  0.0001536) #for acq. 6.5 kHz"
+
+#time.sleep(1.0)
+
+#pico_amp_6.start()
+
+dt = datetime.now()
+print "datetime.now after acquire", dt
+caput ("X12SA-OP-BPM6:Acquire", "Acquire")
+#ticks = time.time()
+#print "Number of ticks since 12:00am, January 1, 1970:", ticks
+