34 lines
1.1 KiB
Python
34 lines
1.1 KiB
Python
"""
|
|
Manual scan: Manually setting positioners and reading back sensors, but still using
|
|
the standard data handling and plotting of built-in scans.
|
|
"""
|
|
|
|
MOTOR_RANGE = (0.0, 8.0)
|
|
OUTPUT_SETPOINTS = (1.0, 2.0, 3.0)
|
|
FIXED_X = True
|
|
|
|
|
|
writables_names = [m1.getName(), ao1.getName()]
|
|
readable_names = [ai1.getName(), ai2.getName()]
|
|
start = [ MOTOR_RANGE[0] if FIXED_X else -1, OUTPUT_SETPOINTS[0]]
|
|
stop = [ MOTOR_RANGE[1] if FIXED_X else -1, OUTPUT_SETPOINTS[-1]]
|
|
steps = [int(MOTOR_RANGE[1]-MOTOR_RANGE[0]), len(OUTPUT_SETPOINTS)-1 if FIXED_X else -1]
|
|
|
|
scan = ManualScan(writables_names, readable_names ,start, stop, steps)
|
|
|
|
|
|
#This option is to plot the foe each output value one 1D series, intead of all in a matrix plot
|
|
set_preference(Preference.PLOT_TYPES, {ai1:1,ai2:1})
|
|
|
|
|
|
scan.start()
|
|
m1.setSpeed(10.0)
|
|
for setpoint1 in frange(MOTOR_RANGE[0], MOTOR_RANGE[1], 1.0, True):
|
|
m1.move(setpoint1)
|
|
for setpoint2 in OUTPUT_SETPOINTS:
|
|
ao1.write(setpoint2)
|
|
scan.append ([setpoint1, setpoint2], [m1.read(), ao1.read()], [ai1.read(), ai2.read()])
|
|
|
|
|
|
scan.end()
|