Closedown

plugins/TestingList.java

@@ -394,7 +394,10 @@ public class TestingList extends Panel {
             //scan through the table and execute the selected tests
             int row = position;
             if (row <= jTable1.getRowCount() ) {
-                bSelected = (boolean) jTable1.getValueAt(row, COL_CHECK);
+                for(row = position ; row <= jTable1.getRowCount() ; row++){
+                    bSelected = (boolean) jTable1.getValueAt(row, COL_CHECK);
+                    if(bSelected) break;
+                }
                 if (bSelected) {
                     sDeviceName = jTable1.getValueAt(row, COL_DEVICENAME).toString();
                     sTestName = jTable1.getValueAt(row, COL_TESTNAME).toString();

script/Check Linearity LS.py

@@ -1,105 +0,0 @@
-#Script imported from: Check Linearity LS.xml
-
-#Pre-actions
-#p = subproccess.Popen('/bin/sleep 2' +, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
-#p.communicate()
-#ret = p.returncode
-#if ret <> true:
-#   raise Exception('Script returned  with an exit value not equal to 0')
-caput('PO2TC-NCS-LS:MOTOR.VELO', '50')
-caput('PO2TC-NCS-LS:DEMAND', '350')
-
-#TODO: Set the diplay names of positioners and detectors
-scan = ManualScan(['idCOUNT'], ['idMSTA', 'idRVAL', 'idRRBV', 'idRBV', 'idVAL', 'idATHM', 'idENCODERraw', 'idENCODER', 'idRDY', 'idILK', 'idDiff', 'idResult'] , [0.0], [200.0], [200])
-scan.start()
-
-#Creating channels: dimension 1
-#PseudoPositioner idCOUNT
-#ScalarDetector idMSTA
-idMSTA = Channel('PO2TC-NCS-LS:MOTOR.MSTA', type = 'd')
-#ScalarDetector idRVAL
-idRVAL = Channel('PO2TC-NCS-LS:MOTOR.RVAL', type = 'd')
-#ScalarDetector idRRBV
-idRRBV = Channel('PO2TC-NCS-LS:MOTOR.RRBV', type = 'd')
-#ScalarDetector idRBV
-idRBV = Channel('PO2TC-NCS-LS:MOTOR.RBV', type = 'd')
-#ScalarDetector idVAL
-idVAL = Channel('PO2TC-NCS-LS:MOTOR.VAL', type = 'd')
-#ScalarDetector idATHM
-idATHM = Channel('PO2TC-NCS-LS:MOTOR.ATHM', type = 'd')
-#ScalarDetector idENCODERraw
-idENCODERraw = Channel('PO2TC-NCS-LS:ENCODERraw', type = 'd')
-#ScalarDetector idENCODER
-idENCODER = Channel('PO2TC-NCS-LS:ENCODER', type = 'd')
-#ScalarDetector idRDY
-idRDY = Channel('PO2TC-NCS-LS:RDY', type = 'd')
-#ScalarDetector idILK
-idILK = Channel('PO2TC-NCS-LS:ILK', type = 'd')
-
-#Dimension 1
-#PseudoPositioner idCOUNT
-for setpoint1 in range(0, 200):
-    readback1 = setpoint1
-    sleep( 0.02 ) # Settling time
-    #Detector idMSTA
-    detector1 = idMSTA.get()
-    #Detector idRVAL
-    detector2 = idRVAL.get()
-    #Detector idRRBV
-    detector3 = idRRBV.get()
-    #Detector idRBV
-    detector4 = idRBV.get()
-    #Detector idVAL
-    detector5 = idVAL.get()
-    #Detector idATHM
-    detector6 = idATHM.get()
-    #Detector idENCODERraw
-    detector7 = idENCODERraw.get()
-    #Detector idENCODER
-    detector8 = idENCODER.get()
-    #Detector idRDY
-    detector9 = idRDY.get()
-    #Detector idILK
-    detector10 = idILK.get()
-    #Manipulation idResult
-    #Variable Mappings
-    diff =  idDiff
-    count =  setpoint1
-    if (count < 160) and (diff < -5):
-       return( 1, "The motor/encoder position difference signal exceeded the lower limit (-5 deg)" )
-    if (count < 160) and (diff > 5):
-       return( 2, "The motor/encoder position difference signal exceeded the upper limit (+5 deg)" )
-    if (count > 160) and (diff < -0.5):
-       idResult = ( 3, "Note: The position difference at the end of movement was too great (more than -0.5 deg)" )
-    if (count > 160) and (diff > 0.5):
-       idResult = ( 4, "Note: The position difference at the end of movement was too great (more than  0.5 deg)" )             
-    if (count < 160):
-       idResult = ( 0, "Note: The motor drive linearity check did not yet complete.")       
-    else:
-       idResult = ( 0, "The motor drive linearity was within the acceptable limits.")       
-     
-    #Manipulation idDiff
-    #Variable Mappings
-    a =  detector4
-    b =  detector8
-    count =  setpoint1
-    idDiff = a-b
-    scan.append ([setpoint1], [readback1], [detector1, detector2, detector3, detector4, detector5, detector6, detector7, detector8, detector9, detector10, idResult, idDiff])
-
-#Closing channels
-idMSTA.close()
-idRVAL.close()
-idRRBV.close()
-idRBV.close()
-idVAL.close()
-idATHM.close()
-idENCODERraw.close()
-idENCODER.close()
-idRDY.close()
-idILK.close()
-
-scan.end()
-
-#Post-actions
-caput('PO2TC-NCS-LS:MOTOR.VELO', '270')
-caput('PO2TC-NCS-LS:DEMAND', '0')