32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
## Guide and electronics
|
|
**Electronics updated July 2023**
|
|
## Drawings
|
|
- [Overview](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197885&pPosInQueryList=1&pCount=831&pIndexInQueryList=35&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL)
|
|
- [Device](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197886&pPosInQueryList=1&pCount=831&pIndexInQueryList=36&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL)
|
|
- [Diode holder](http://planarchiv.psi.ch/plandb_pub/p_plandb_cus_pub_sucw.viewItem?pId=197909&pPosInQueryList=1&pCount=831&pIndexInQueryList=59&pKrz=&pHg=50024&pUg=24&pLnr=&pAnlage=&pBaugruppe=&pBenennung=&pFremdNr=&pGueltig=GUL)
|
|
|
|
## Target history
|
|
15.11.21
|
|
The device was opened, and the targets changed to:
|
|
- Lower: 1 um diamond
|
|
- Middle: 200 nm SiN
|
|
- Top: 50 nm SiN
|
|
Note the 1 um target is marked around a couple of millimetres from the deposition process,
|
|
|
|
## Device motion
|
|
The following motors are used to scan the device position used to calibrate the device.
|
|
- SAROP21-PBPS133:MOTOR_X1
|
|
- SAROP21-PBPS133:MOTOR_Y1
|
|
|
|
Values:
|
|
- SAROP21-PBPS133:MOTOR_X1.VAL
|
|
- SAROP21-PBPS133:MOTOR_Y1.VAL
|
|
|
|
## BS config
|
|
```
|
|
bs config SAROP21-CVME-PBPS3 -u
|
|
SAROP21-PBPS133:Lnk9Ch0-PP_VAL_PD0 1 0
|
|
SAROP21-PBPS133:Lnk9Ch0-PP_VAL_PD1 1 0
|
|
SAROP21-PBPS133:Lnk9Ch0-PP_VAL_PD2 1 0
|
|
SAROP21-PBPS133:Lnk9Ch0-PP_VAL_PD3 1 0
|
|
``` |