2.5 KiB
2.5 KiB
Drawings
Diode
10 mm x 10 mm, Si PIN photodiode, S3590-09, specs
ADC
Ioxos 2111, DC coupled, 16 bit, 250 Msps, specs
Basic controls
Move diode in/out:
- In -
caput SATFE10-PDIM067:PROBE_SP 1 - Out -
caput SATFE10-PDIM067:PROBE_SP 0
Overview panels:
caqtdm S_SATFE10_PDIM067_expert.ui
Data
Bias: Bias is from a 9V battery and HV supply filter to the cathode Gain paths: The signal from the anode passes a signal filter and then a tee. One path goes to an amplifier(20 dB) and then a second tee. One branch goes to channel 0 The second branch is via a 20 dB attenuator to channel 2. The other branch has a 10 dB attenuator.
flowchart TD
A[Anode] --> B(20 dB amp)
A --> C(10 dB attenuator)
B --> D[Channel 0]
B -->|20 dB att| E[Channel 2]
C --> F[Channel 3]
The following PVs are the integrated signal waveforms.
- SATFE10-LSCP2-FNS:CH1:VAL_GET
- SATFE10-LSCP2-FNS:CH2:VAL_GET
- SATFE10-LSCP2-FNS:CH3:VAL_GET
GUDE
- Power cycle:
SATFE10-CPPS-01:CH1PWRCYC - On/off
SATFE10-CPPS-01:CH1SET
Alignment
Alignment check 8.1.20
In position:
- 40.0 mm with User offset at 0.0
Out position:
- 0.0 mm with User offset at 0.0
Triggering
EVR:
- SATFE10-PDIM067-EVR0
Triggering:
- Pulser 2
- Event 52
- Delay 1002.612 uS
- Width 10.000 uS
- FrontUnivOut 6
Control:
- On
caput SATFE10-PDIM067-EVR0:FrontUnivOut6-Ena-SP 0 - Off
caput SATFE10-PDIM067-EVR0:FrontUnivOut6-Ena-SP 1