1.9 KiB
1.9 KiB
Guide and electronics
The electronics and operation of the PBPS units are currently being updated. Further info to follow
Drawings
Attenuation
This device has 3 Kapton layers:
- 50 um kapton Drawing
- 125 um kapton
- approx 20 um black kapton
Device motion
The following motors are used to scan the device position, used for calibration of the device
- SARFE10-PBPS053:MOTOR_X1 (range -1.8, 2.5 mm)
- SARFE10-PBPS053:MOTOR_Y1 (range -2.3 , 1.7 mm) Values:
- SARFE10-PBPS053:MOTOR_X1.VAL
- SARFE10-PBPS053:MOTOR_Y1.VAL
Modification history
- 02.11.20 Replaced 50 um kapton with approx 20 um black kapton, exchanged 50 nm Si3N4 with new target as old target looked burnt (brown beam profile on target)
- 07.01.21 Added 125 um and 50 um kapton in front of diodes as attenuation
- 21.12.22 Replaced lower 50 nm Si3N4 and 30 nm Si3N4 targets with burn marks
Burn mark examples
From 21.12.22