2023-10-25 13:10:12 +02:00

65 lines
1.4 KiB
Markdown

## Guide and electronics
Connected to new electronics October 2024
## Channels
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD0
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD1
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD2
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD3
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD4
## Diode
### Connections
As of 25.10.23
The diode connections are as follows:
| Label on flange | EPICS user panel |
| ------ | ------ |
| 2 | 0 (PDL) |
| 3 | 1 (PDU) |
| 1 | 2 (PDD) |
| 4 | 3 (PDR) |
### Test
Using multimeter
- Forward bias voltage drop of 0.4 V
- Forward bias resistance 0.9 MOhm
- Reverse bias voltage drop of 0.0 V
Diodes are PIPs diodes
## Drawings
## Target history
**Eco settings**
| Index | Target |x pos [mm]|
| ------ | ------ |------ |
| 0 | Si3N4_200nm target |-18.6493 mm|
| 1 | Si3N4_500nm target |-7.76965 mm|
| 2 | Si3N4_1um target |3.32048 mm|
| 3 | Si3N4_2um target |14.2803 mm|
## Device motion
Values:
## BS config
IOC for front end:
`SAROP21-CVME-PBPS2.psi.ch`
If the bs config needs to be updated use the following channels
```python
bs config SAROP21-CVME-PBPS2 -u
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD0 1 0
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD1 1 0
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD2 1 0
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD3 1 0
SARES21-PBPS141:Lnk9Ch0-PP_VAL_PD4 1 0