leonarski_fandClaude Opus 5
d2f57975e8
Which way the detector's rows run was decided once, in the module assembly, and never stated again: not on the wire, not in the file, nowhere a consumer could read it. mirror_y was consumed inside the DetectorGeometryModular constructor and discarded. It is now a declared property of the detector setup, carried into the start message, written to HDF5 under detectorSpecific, and read back. Absence means true, which is the MX convention and the only thing Jungfraujoch has ever produced. Deliberately a boolean and not a corner enum: the assembled image can only be flipped in Y, so a four-corner value would encode states that cannot occur. DECTRIS stream2 has no field for this - checked against the specification - so the key is new rather than an extension of theirs, and a consumer that does not know it skips it and behaves exactly as before. The .poni file gains pyFAI's orientation. Without it pyFAI applies its own default, 3 (bottom left), and believes increasing row means physically upwards. The numbers still agreed - a mirror preserves 2theta, so radial integration was never affected - but the azimuth came out with the opposite sense, which matters for cake and sector integration. Declaring orientation 2 is not a one-line addition: it re-anchors Poni1 to the top edge and reverses rot2 and rot3, a row flip being improper. Measured against pyFAI 2026.5.0 by searching all four orientations, both Poni1 anchorings and all eight sign combinations: exactly two combinations reproduce the lab position DiffractionGeometry computes to 1.4e-17 m - the unlabelled form written before, and (orientation 2, Poni1 = height-1-beam_y, +rot1/+rot2/-rot3), which is now written. Calibration_PoniFileAxisConvention pins it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Jungfraujoch
Application to receive data from the PSI JUNGFRAU and EIGER detectors.
All documentation is now placed in docs/ subdirectory and for the current version hosted on Jungfraujoch Read The Docs page.