leonarski_fandClaude Fable 5
70c4d871b6
- Capitalize Rugnux as a proper noun throughout the prose; the command stays lowercase `rugnux` in code font. RUGNUX_OVERVIEW.md is retitled "What Rugnux does". - ACKNOWLEDGEMENT.md cites the raw-data repositories only: dataset counts and DOI prefixes moved out (EXTERNAL_TEST_DATA.md owns them), the ESRF data portal gains its citation (Dimper et al. 2019), and MXRDR remains name + link - it has no canonical citation paper. - RUGNUX_FORMATS.md: the CCD formats (marCCD, SMV) are supported as-is with very limited scope, and per-panel XFEL data is not read. - Fix wrong facts a reader would act on: nonexistent `make jfjoch` targets, invalid udev rules, PUSH sockets documented as PULL, swapped writer width/height, underload semantics, the transposed pixel-mask numpy example (the server checks width and height separately), the Durin/Neggia mask-bit table, FPGA threshold register addresses and the mailbox bit field, the I2C core's document number (PG090), an inverted MODEL_FIT_SIGMA formula, a self-inconsistent worked report example, and 11 cross-page anchors whose slugs carry MyST section numbers. - Unify CC1/2 spelling in prose; math notation and report keys unchanged. - Sweep grammar, typos and editing residue across the FPGA, deployment, streaming and analysis pages, including historical CHANGELOG typos. - rugnux_cli.cpp: the -S usage/error examples pair 96 with P43212; 92 names a different group. - Root THIRD_PARTY_NOTICES.md: scope the GPL-compatibility claim (CUDA EULA) and the vendored-table intro (traccc); the docs copy regenerates via update_version.sh. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
16 lines
937 B
Markdown
16 lines
937 B
Markdown
# Supported detectors
|
|
|
|
## PSI detectors
|
|
Jungfraujoch supports PSI JUNGFRAU and PSI EIGER detectors. Jungfraujoch controls the detector via `slsDetectorPackage`, which is statically compiled into its source code.
|
|
The detector firmware must match the `slsDetectorPackage` version used in Jungfraujoch.
|
|
The default is 8.0.2; 9.2.0 is built with the `SLS9=ON` CMake option and published in the `slsdet9`
|
|
[package repositories](REPOSITORIES.md).
|
|
See [PSI Detector group website](https://www.psi.ch/en/lxn/software-releases) for details.
|
|
|
|
## DECTRIS detectors
|
|
|
|
Jungfraujoch can be used with DECTRIS detectors, as a data analysis tool.
|
|
In this solution Jungfraujoch controls the Detector Control Unit (DCU) of the detector, and handles the output data stream of the DCU.
|
|
This mode, called "lite" mode, doesn't use FPGA boards, but mostly CPUs and GPUs for indexing.
|
|
The mode is currently experimental and intended for low data rates (100 Hz).
|