VERSION: 1.0.0-rc.134

1. What if write_master_file = false
2. Finalized file statistics use wrong name

CMakeLists.txt

@@ -39,24 +39,21 @@ INCLUDE(CheckLanguage)
 INCLUDE(CheckIncludeFile)
 CHECK_LANGUAGE(CUDA)
 
-SET(CMAKE_CUDA_ARCHITECTURES 75 80 86 89 90 100 120) # T4, A100, RTX A4000, L4
+SET(CMAKE_CUDA_ARCHITECTURES 75 80 86 89) # T4, A100, RTX A4000, L4
 SET(CMAKE_CUDA_STANDARD 17)
-SET(CMAKE_CUDA_FLAGS_RELEASE "-O3 -lineinfo")
-SET(CMAKE_CUDA_RUNTIME_LIBRARY Static)
+SET(CMAKE_CUDA_FLAGS_RELEASE "-O3")
 
 SET(JFJOCH_CUDA_AVAILABLE OFF)
 
 IF (CMAKE_CUDA_COMPILER)
     IF (JFJOCH_USE_CUDA)
         ENABLE_LANGUAGE(CUDA)
+        FIND_PACKAGE(CUDAToolkit REQUIRED)
+        SET(CMAKE_CUDA_RUNTIME_LIBRARY Static)
         MESSAGE(STATUS "CUDA VERSION: ${CMAKE_CUDA_COMPILER_VERSION}")
-        IF (CMAKE_CUDA_COMPILER_VERSION VERSION_GREATER_EQUAL "12.8")
-            FIND_PACKAGE(CUDAToolkit REQUIRED)
-            ADD_COMPILE_DEFINITIONS(JFJOCH_USE_CUDA)
-            SET(JFJOCH_CUDA_AVAILABLE ON)
-        ELSE()
-            MESSAGE(WARNING "CUDA older than 12.8 not supported")
-        ENDIF()
+        ADD_COMPILE_DEFINITIONS(JFJOCH_USE_CUDA)
+        FIND_LIBRARY(CUDART_LIBRARY cudart_static PATHS ${CMAKE_CUDA_IMPLICIT_LINK_DIRECTORIES} REQUIRED)
+        SET(JFJOCH_CUDA_AVAILABLE ON)
     ELSE()
         MESSAGE(WARNING "CUDA Available, but disabled by user")
     ENDIF()
@@ -79,12 +76,16 @@ CHECK_INCLUDE_FILE(numa.h HAS_NUMA_H)
 
 include(FetchContent)
 
-SET(HDF5_ENABLE_SZIP_SUPPORT OFF CACHE BOOL "" FORCE)
-SET(HDF5_ENABLE_SZIP_ENCODING OFF CACHE BOOL "" FORCE)
-SET(HDF5_BUILD_EXAMPLES OFF CACHE BOOL "" FORCE)
-SET(HDF5_BUILD_CPP_LIB OFF CACHE BOOL "" FORCE)
-SET(HDF5_ENABLE_ZLIB_SUPPORT ON CACHE BOOL "" FORCE)
-SET(HDF5_EXTERNALLY_CONFIGURED 1 CACHE BOOL "" FORCE)
+SET(PISTACHE_USE_CONTENT_ENCODING_DEFLATE ON)
+SET(PISTACHE_BUILD_TESTS OFF)
+SET(PISTACHE_USE_SSL ON)
+
+SET(HDF5_ENABLE_SZIP_SUPPORT OFF)
+SET(HDF5_ENABLE_SZIP_ENCODING OFF)
+SET(HDF5_BUILD_EXAMPLES OFF)
+SET(HDF5_BUILD_CPP_LIB OFF)
+SET(HDF5_ENABLE_Z_LIB_SUPPORT ON)
+SET(HDF5_EXTERNALLY_CONFIGURED 1)
 
 SET(SPDLOG_BUILD_EXAMPLES OFF CACHE BOOL "" FORCE)
 SET(SPDLOG_BUILD_TESTS OFF CACHE BOOL "" FORCE)

VERSION

@@ -1 +1 @@
-1.0.0-rc.144
+1.0.0-rc.134

acquisition_device/AcquisitionCounters.cpp

@@ -31,7 +31,9 @@ void AcquisitionCounters::Reset(const DiffractionExperiment &experiment, uint16_
         curr_frame_number[i] = 0;
 
     handle_for_frame = std::vector<uint64_t>(expected_frames * nmodules, HandleNotFound);
+    handle_for_pedestal = std::vector<uint64_t>(nmodules * 16, HandleNotFound); // 16 = storage cells
     packets_collected = std::vector<uint16_t>(expected_frames * nmodules);
+    saved_completions = std::vector<Completion>(expected_frames * nmodules);
     packets_per_module = std::vector<uint64_t>(nmodules);
     total_packets = 0;
     expected_packets_per_module = 512 * experiment.GetFPGASummation();
@@ -74,6 +76,7 @@ void AcquisitionCounters::UpdateCounters(const Completion *c) {
 
     packets_collected.at(c->frame_number * nmodules + c->module_number) = c->packet_count;
     handle_for_frame.at(c->frame_number * nmodules + c->module_number) = c->handle;
+    saved_completions.at(c->frame_number * nmodules + c->module_number) = *c;
 
     total_packets += c->packet_count;
     packets_per_module[c->module_number] += c->packet_count;
@@ -88,7 +91,6 @@ void AcquisitionCounters::SetAcquisitionFinished() {
 }
 
 uint64_t AcquisitionCounters::GetBufferHandle(size_t frame, uint16_t module_number) const {
-    std::shared_lock sl(m);
     if (frame >= expected_frames)
         throw JFJochException(JFJochExceptionCategory::ArrayOutOfBounds,
                               "GetBufferHandle Wrong frame number: " + std::to_string(frame));
@@ -113,6 +115,18 @@ uint64_t AcquisitionCounters::GetBufferHandleAndClear(size_t frame, uint16_t mod
     return ret_val;
 }
 
+uint64_t AcquisitionCounters::GetPedestalBufferHandle(size_t storage_cell, uint16_t module_number) const {
+    std::unique_lock ul(m);
+    if (storage_cell >= 16)
+        throw JFJochException(JFJochExceptionCategory::ArrayOutOfBounds,
+                              "GetBufferHandleAndClear Wrong frame number: " + std::to_string(storage_cell));
+    if (module_number >= nmodules)
+        throw JFJochException(JFJochExceptionCategory::ArrayOutOfBounds,
+                              "GetBufferHandleAndClear Wrong module number: " + std::to_string(module_number)
+                              + " for SC " + std::to_string(storage_cell));
+    return handle_for_pedestal.at(storage_cell * nmodules + module_number);
+}
+
 uint64_t AcquisitionCounters::GetCurrFrameNumber(uint16_t module_number) const {
     if (module_number >= max_modules)
         throw JFJochException(JFJochExceptionCategory::ArrayOutOfBounds,
@@ -193,7 +207,7 @@ uint64_t AcquisitionCounters::GetTotalPackets() const {
 }
 
 uint64_t AcquisitionCounters::GetTotalPackets(uint16_t module_number) const {
-    std::shared_lock sl(m);
+    std::unique_lock ul(m);
 
     if (module_number >= nmodules)
         throw JFJochException(JFJochExceptionCategory::ArrayOutOfBounds,

acquisition_device/AcquisitionCounters.h

@@ -22,8 +22,11 @@ class AcquisitionCounters {
     mutable std::condition_variable_any data_updated;
 
     std::vector<uint64_t> handle_for_frame;
+    std::vector<uint64_t> handle_for_pedestal;
     std::vector<uint16_t> packets_collected;
 
+    std::vector<Completion> saved_completions;
+
     uint64_t total_packets;
     std::vector<uint64_t> packets_per_module;
 
@@ -53,6 +56,7 @@ public:
     void WaitForFrame(size_t curr_frame, uint16_t module_number = UINT16_MAX) const;
     int64_t CalculateDelay(size_t curr_frame, uint16_t module_number = UINT16_MAX) const; // mutex acquired indirectly
     uint64_t GetBufferHandle(size_t frame, uint16_t module_number) const;
+    uint64_t GetPedestalBufferHandle(size_t storage_cell, uint16_t module_number) const;
     bool IsFullModuleCollected(size_t frame, uint16_t module_number) const;
     bool IsAnyPacketCollected(size_t frame, uint16_t module_number) const;
     bool IsAcquisitionFinished() const;

acquisition_device/AcquisitionDevice.cpp

@@ -200,7 +200,7 @@ void AcquisitionDevice::InitializeEmptyPixelMask(const DiffractionExperiment &ex
 
 
 void AcquisitionDevice::InitializeDataProcessing(const DiffractionExperiment &experiment,
-                                                 const AzimuthalIntegrationMapping &azint) {
+                                                 const AzimuthalIntegration &azint) {
     auto offset = experiment.GetFirstModuleOfDataStream(data_stream);
     size_t modules = experiment.GetModulesNum(data_stream);
 
@@ -294,8 +294,8 @@ DeviceStatus AcquisitionDevice::GetDeviceStatus() const {
 AcquisitionDeviceStatistics AcquisitionDevice::GetStatistics() const {
     AcquisitionDeviceStatistics ret{};
     ret.bytes_received = GetBytesReceived();
-    ret.start_timestamp = std::chrono::system_clock::to_time_t(start_time);
-    ret.end_timestamp = std::chrono::system_clock::to_time_t(end_time);
+    ret.start_timestamp = start_time.time_since_epoch().count();
+    ret.end_timestamp = end_time.time_since_epoch().count();
     ret.packets_expected = counters.GetTotalExpectedPackets();
     ret.good_packets = counters.GetTotalPackets();
 

acquisition_device/AcquisitionDevice.h

@@ -21,7 +21,7 @@
 #include "Completion.h"
 #include "../fpga/pcie_driver/jfjoch_fpga.h"
 #include "../common/NetworkAddressConvert.h"
-#include "../common/AzimuthalIntegrationMapping.h"
+#include "../common/AzimuthalIntegration.h"
 
 struct AcquisitionDeviceStatistics {
     uint64_t good_packets;
@@ -101,7 +101,7 @@ public:
     void InitializePixelMask(const DiffractionExperiment &experiment, const PixelMask &mask_raw);
     virtual void InitializePixelMask(const uint32_t *module_mask, size_t module_number);
     void InitializeROIMap(const DiffractionExperiment& experiment, const std::vector<uint16_t>& raw_roi_map);
-    void InitializeDataProcessing(const DiffractionExperiment &experiment, const AzimuthalIntegrationMapping& azint);
+    void InitializeDataProcessing(const DiffractionExperiment &experiment, const AzimuthalIntegration& azint);
 
     const AcquisitionCounters& Counters() const;
 

acquisition_device/FPGAAcquisitionDevice.cpp

@@ -123,7 +123,7 @@ void FPGAAcquisitionDevice::InitializeIntegrationMap(const uint16_t *map, const
 }
 
 void FPGAAcquisitionDevice::SetInternalGeneratorFrame(const uint16_t *input, size_t module_number) {
-    memcpy(buffer_device[0]->pixels, input, RAW_MODULE_SIZE * sizeof(uint16_t));
+    memcpy(buffer_device[0], input, RAW_MODULE_SIZE * sizeof(uint16_t));
     buffer_device[0]->module_statistics.module_number = module_number;
     buffer_device[0]->module_statistics.load_calibration_destination = LOAD_CALIBRATION_DEST_FRAME_GEN;
     LoadCalibration(0);

broker/JFJochBrokerHttp.cpp

@@ -138,6 +138,10 @@ std::pair<int, std::string> JFJochBrokerHttp::handleOperationException(const std
 
 void JFJochBrokerHttp::attach(httplib::Server &server) {
     register_routes(server);
+    server.set_error_handler([](const httplib::Request &, httplib::Response &res) {
+        res.status = 404;
+        res.set_content("The requested method does not exist", "text/plain");
+    });
 }
 
 void JFJochBrokerHttp::register_routes(httplib::Server &server) {
@@ -343,15 +347,6 @@ void JFJochBrokerHttp::register_routes(httplib::Server &server) {
         }
     });
 
-    server.Post("/wait_until_running", [this](const httplib::Request &req, httplib::Response &res) {
-        try {
-            wait_until_running_post(parse_query_value<int32_t>(req, "timeout"), res);
-        } catch (const std::exception &e) {
-            auto [c, s] = handleOperationException(e);
-            send_plain(res, c, s);
-        }
-    });
-
     server.Get("/xfel/event_code", bind_noarg(&JFJochBrokerHttp::xfel_event_code_get));
     server.Get("/xfel/pulse_id", bind_noarg(&JFJochBrokerHttp::xfel_pulse_id_get));
 }
@@ -374,7 +369,7 @@ void JFJochBrokerHttp::initialize_post(httplib::Response &response) {
 void JFJochBrokerHttp::start_post(const Dataset_settings &datasetSettings, httplib::Response &response) {
     nlohmann::json j = datasetSettings;
     logger.Info("Start {}", j.dump());
-    state_machine.Start(Convert(datasetSettings), datasetSettings.isAsyncStart());
+    state_machine.Start(Convert(datasetSettings));
     response.status = 200;
 }
 
@@ -382,38 +377,6 @@ void JFJochBrokerHttp::status_get(httplib::Response &response) {
     ProcessOutput(Convert(state_machine.GetStatus()), response);
 }
 
-void JFJochBrokerHttp::wait_until_running_post(const std::optional<int32_t> &timeout, httplib::Response &response) {
-    BrokerStatus status;
-    if (!timeout)
-        status = state_machine.WaitTillNotBusy(std::chrono::minutes(1));
-    else if ((timeout.value() > 3600) || (timeout.value() < 0)) {
-        response.status = 400;
-        response.set_content("timeout must be in range 0..3600", "text/plain");
-        return;
-    } else if (timeout.value() == 0)
-        status = state_machine.GetStatus();
-    else
-        status = state_machine.WaitTillNotBusy(std::chrono::seconds(timeout.value()));
-
-    logger.Info("Wait until running");
-
-    switch (status.state) {
-        case JFJochState::Measuring:
-            response.status = 200;
-            break;
-        case JFJochState::Inactive:
-            response.status = 502;
-            break;
-        case JFJochState::Error:
-            throw WrongDAQStateException(status.message.value_or("Unknown error"));
-        case JFJochState::Idle:
-        case JFJochState::Busy:
-        case JFJochState::Calibration:
-            response.status = 504;
-            break;
-    }
-}
-
 void JFJochBrokerHttp::wait_till_done_post(const std::optional<int32_t> &timeout, httplib::Response &response) {
     BrokerStatus status;
     if (!timeout)
@@ -427,8 +390,6 @@ void JFJochBrokerHttp::wait_till_done_post(const std::optional<int32_t> &timeout
     else
         status = state_machine.WaitTillMeasurementDone(std::chrono::seconds(timeout.value()));
 
-    logger.Info("Wait till done");
-
     switch (status.state) {
         case JFJochState::Idle:
             response.status = 200;

broker/JFJochBrokerHttp.h

@@ -77,8 +77,6 @@ class JFJochBrokerHttp {
                     httplib::Response &response);
     void status_get(httplib::Response &response);
     void wait_till_done_post(const std::optional<int32_t> &timeout, httplib::Response &response);
-    void wait_until_running_post(const std::optional<int32_t> &timeout, httplib::Response &response);
-
     void trigger_post(httplib::Response &response);
     void pedestal_post(httplib::Response &response);
 

broker/JFJochBrokerParser.cpp

@@ -124,19 +124,19 @@ DetectorSetup ParseDetectorSetup(const org::openapitools::server::model::Detecto
             .SerialNumber(d.getSerialNumber())
             .ModuleSync(d.isModuleSync());
 
-    if (d.readoutTimeNsIsSet())
-        setup.ReadOutTime(std::chrono::nanoseconds(d.getReadoutTimeNs()));
+    if (d.readoutTimeUsIsSet())
+        setup.ReadOutTime(std::chrono::microseconds(d.getReadoutTimeUs()));
 
     if (d.baseDataIpv4AddressIsSet())
         setup.BaseIPv4Addr(d.getBaseDataIpv4Address());
     if (d.txDelayIsSet())
         setup.TxDelay(d.getTxDelay());
 
-    if (d.minCountTimeNsIsSet())
-        setup.MinCountTime(std::chrono::nanoseconds(d.getMinCountTimeNs()));
+    if (d.minimumCountTimeUsIsSet())
+        setup.MinCountTime(std::chrono::microseconds(d.getMinimumCountTimeUs()));
 
-    if (d.minFrameTimeNsIsSet())
-        setup.MinFrameTime(std::chrono::nanoseconds(d.getMinFrameTimeNs()));
+    if (d.minimumFrameTimeUsIsSet())
+        setup.MinFrameTime(std::chrono::microseconds(d.getMinimumFrameTimeUs()));
 
     if (d.defaultSettingsIsSet())
         setup.DefaultSettings(Convert(d.getDefaultSettings()));

broker/JFJochServices.cpp

@@ -17,9 +17,7 @@ void JFJochServices::Start(const DiffractionExperiment& experiment,
 
     if (receiver != nullptr) {
         logger.Info("   ... receiver start");
-        if (image_puller)
-            image_puller->ResumeAndClear();
-        receiver->Start(experiment, pixel_mask, calibration, image_puller);
+        receiver->Start(experiment, pixel_mask, calibration);
         {
             std::shared_lock ul(detector_mutex);
             if (detector && !experiment.IsUsingInternalPacketGen()) {
@@ -33,8 +31,6 @@ void JFJochServices::Start(const DiffractionExperiment& experiment,
 }
 
 void JFJochServices::Off() {
-    image_puller.reset();
-
     std::unique_ptr<DetectorWrapper> old_detector;
     {
         std::unique_lock ul(detector_mutex);
@@ -57,12 +53,9 @@ void JFJochServices::On(DiffractionExperiment &x) {
             case DetectorType::EIGER:
             case DetectorType::JUNGFRAU:
                 new_detector = std::make_unique<SLSDetectorWrapper>();
-                image_puller.reset();
                 break;
             case DetectorType::DECTRIS:
                 new_detector = std::make_unique<DectrisDetectorWrapper>();
-                image_puller = std::make_shared<ZMQImagePuller>(x.GetDetectorSetup().GetDECTRISStream2Addr());
-                image_puller->Suspend();
                 break;
         }
         new_detector->Initialize(x, receiver->GetNetworkConfig());
@@ -107,8 +100,6 @@ JFJochServicesOutput JFJochServices::Stop() {
 
             logger.Info("Wait for receiver done");
             ret.receiver_output = receiver->Stop();
-            if (image_puller)
-                image_puller->Suspend();
 
             logger.Info("    ... Receiver efficiency: {} %     Max delay: {}     Compression ratio {}x",
                     static_cast<int>(ret.receiver_output.efficiency * 100.0),
@@ -122,11 +113,11 @@ JFJochServicesOutput JFJochServices::Stop() {
                                     ret.receiver_output.received_packets[i], ret.receiver_output.expected_packets[i]);
                 }
             }
-            logger.Info("    ... finished with success");
         } catch (const JFJochException &e) {
             logger.Error("   ... finished with error {}", e.what());
             exception = std::make_unique<JFJochException>(e);
         }
+        logger.Info("Receiver finished with success");
     } else {
         logger.Info("No receiver - sleeping for 30 seconds");
         std::this_thread::sleep_for(std::chrono::seconds(30));
@@ -237,7 +228,7 @@ void JFJochServices::GetXFELPulseID(std::vector<uint64_t> &v) const {
 
 void JFJochServices::GetXFELEventCode(std::vector<uint64_t> &v) const {
     if (receiver)
-        receiver->GetXFELEventCode(v);
+        receiver->GetXFELPulseID(v);
 }
 
 std::vector<DeviceStatus> JFJochServices::GetDeviceStatus() const {

broker/JFJochServices.h

@@ -20,7 +20,6 @@ class JFJochServices {
 
     JFJochReceiverService *receiver = nullptr;
     std::unique_ptr<DetectorWrapper> detector;
-    std::shared_ptr<ZMQImagePuller> image_puller;
 
     std::atomic<bool> cannot_stop_detector = false;
     Logger &logger;

broker/JFJochStateMachine.cpp

@@ -21,14 +21,11 @@ JFJochStateMachine::JFJochStateMachine(const DiffractionExperiment& in_experimen
           pixel_mask_statistics({0, 0, 0}),
           gpu_count(get_gpu_count()) {
 
-#ifndef JFJOCH_USE_FFTW
-    indexing_possible = (get_gpu_count() > 0);
+    indexing_possible =  (get_gpu_count() >= 0);
     if (!indexing_possible)
         data_processing_settings.indexing = false;
-#else
-    data_processing_settings.indexing = true;
-#endif
-    SuppressTIFFErrors();
+
+    SupressTIFFErrors();
 }
 
 bool JFJochStateMachine::ImportPedestalG0(const JFJochReceiverOutput &receiver_output) {
@@ -82,7 +79,7 @@ void JFJochStateMachine::CalibrateJUNGFRAU(std::unique_lock<std::mutex> &ul) {
     pixel_mask.LoadDetectorBadPixelMask(experiment, calibration.get());
 }
 
-void JFJochStateMachine::CalibrateDetector(std::unique_lock<std::mutex> ul) {
+void JFJochStateMachine::CalibrateDetector(std::unique_lock<std::mutex> &ul) {
     cancel_sequence = false;
 
     pixel_mask = PixelMask(experiment);
@@ -112,9 +109,8 @@ void JFJochStateMachine::CalibrateDetector(std::unique_lock<std::mutex> ul) {
         throw;
     }
     SetState(JFJochState::Idle, "Calibration sequence done", BrokerStatus::MessageSeverity::Success);
-    logger.Info("Calibration sequence done");
-    ul.unlock(); // Notify all outside of mutex
-    c.notify_all();
+
+    logger.Info("Pedestal sequence done");
 }
 
 void JFJochStateMachine::TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul) {
@@ -145,7 +141,7 @@ void JFJochStateMachine::TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul)
     ul.lock();
 
     if (mask_output.receiver_output.dark_mask_result.size() == local_experiment.GetPixelsNum()) {
-        pixel_mask.LoadDarkBadPixelMask(local_experiment, mask_output.receiver_output.dark_mask_result);
+        pixel_mask.LoadDarkBadPixelMask(mask_output.receiver_output.dark_mask_result);
         SetState(JFJochState::Idle);
     } else
         SetState(JFJochState::Error, "Mask not collected properly", BrokerStatus::MessageSeverity::Error);
@@ -310,9 +306,12 @@ void JFJochStateMachine::Pedestal() {
     if (state != JFJochState::Idle)
         throw WrongDAQStateException("Must be idle to take pedestal");
 
-    SetState(JFJochState::Busy, "Updating calibration", BrokerStatus::MessageSeverity::Info);
+    measurement = std::async(std::launch::async, &JFJochStateMachine::PedestalThread, this, std::move(ul));
+}
 
-    measurement = std::async(std::launch::async, &JFJochStateMachine::CalibrateDetector, this, std::move(ul));
+
+void JFJochStateMachine::PedestalThread(std::unique_lock<std::mutex> ul) {
+    CalibrateDetector(ul);
 }
 
 void JFJochStateMachine::InitializeThread(std::unique_lock<std::mutex> ul) {
@@ -335,14 +334,14 @@ void JFJochStateMachine::InitializeThread(std::unique_lock<std::mutex> ul) {
         SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
         throw;
     }
-    CalibrateDetector(std::move(ul));
+    CalibrateDetector(ul);
 }
 
 void JFJochStateMachine::Trigger() {
     services.Trigger();
 }
 
-void JFJochStateMachine::Start(const DatasetSettings &settings, bool async) {
+void JFJochStateMachine::Start(const DatasetSettings &settings) {
     std::unique_lock ul(m);
 
     if (state != JFJochState::Idle)
@@ -361,16 +360,18 @@ void JFJochStateMachine::Start(const DatasetSettings &settings, bool async) {
 
     experiment.IncrementRunNumber();
 
-    SetState(JFJochState::Busy, "Preparing measurement", BrokerStatus::MessageSeverity::Info);
-    measurement = std::async(std::launch::async, &JFJochStateMachine::MeasurementThread, this);
-    if (!async)
-        c.wait(ul, [&]() { return state != JFJochState::Busy; });
-}
+    try {
+        SetState(JFJochState::Busy, "Preparing measurement", BrokerStatus::MessageSeverity::Info);
+        services.SetSpotFindingSettings(GetSpotFindingSettings());
+        services.Start(experiment, pixel_mask, calibration.get());
 
-BrokerStatus JFJochStateMachine::WaitTillNotBusy(std::chrono::milliseconds timeout) {
-    std::unique_lock ul(m);
-    c.wait_for(ul, timeout, [&]() { return state != JFJochState::Busy; });
-    return GetStatus();
+        SetState(JFJochState::Measuring, "Measuring ...", BrokerStatus::MessageSeverity::Info);
+        measurement = std::async(std::launch::async, &JFJochStateMachine::MeasurementThread, this);
+    } catch (const std::exception &e) {
+        SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
+        services.Cancel();
+        throw;
+    }
 }
 
 void JFJochStateMachine::UpdatePixelMaskStatistics(const PixelMaskStatistics &input) {
@@ -384,43 +385,12 @@ PixelMaskStatistics JFJochStateMachine::GetPixelMaskStatistics() const {
 }
 
 void JFJochStateMachine::MeasurementThread() {
-    try {
-        services.SetSpotFindingSettings(GetSpotFindingSettings());
-        services.Start(experiment, pixel_mask, calibration.get());
-        {
-            std::unique_lock ul(m);
-            SetState(JFJochState::Measuring, "Measuring ...", BrokerStatus::MessageSeverity::Info);
-        }
-        c.notify_all();
-    }  catch (std::exception &e) {
-        {
-            std::unique_lock ul(m);
-            SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
-        }
-        services.Cancel();
-        c.notify_all();
-        return;
-    }
-
     try {
         auto tmp_output = services.Stop();
         {
             std::unique_lock ul(m);
             scan_result = tmp_output.receiver_output.scan_result;
 
-            auto image_mean_time = tmp_output.receiver_output.processing_time;
-            logger.Info("Per-image mean processing time (microseconds): compression {:.0f} preprocess {:.0f} azint {:.0f} spot finding {:.0f} indexing {:.0f} refinement {:.0f} indexing analysis {:.0f} prediction {:.0f} integration {:.0f} total {:.0f}",
-                        image_mean_time.compression * 1e6,
-                        image_mean_time.preprocessing * 1e6,
-                        image_mean_time.azint * 1e6,
-                        image_mean_time.spot_finding * 1e6,
-                        image_mean_time.indexing * 1e6,
-                        image_mean_time.refinement * 1e6,
-                        image_mean_time.indexing_analysis * 1e6,
-                        image_mean_time.bragg_prediction * 1e6,
-                        image_mean_time.integration * 1e6,
-                        image_mean_time.processing * 1e6);
-
             if (tmp_output.receiver_output.writer_queue_full_warning)
                 SetState(JFJochState::Idle,
                          "Stream receiver (writer or downstream analysis) cannot cope with data; reduce frame rate",
@@ -555,7 +525,7 @@ void JFJochStateMachine::LoadDetectorSettings(const DetectorSettings &settings)
         case JFJochState::Idle:
             if (ImportDetectorSettings(settings)) {
                 SetState(JFJochState::Busy, "Loading settings", BrokerStatus::MessageSeverity::Info);
-                measurement = std::async(std::launch::async, &JFJochStateMachine::CalibrateDetector, this, std::move(ul));
+                measurement = std::async(std::launch::async, &JFJochStateMachine::PedestalThread, this, std::move(ul));
             } else {
                 try {
                     SetState(JFJochState::Busy, "Configure detector", BrokerStatus::MessageSeverity::Info);
@@ -1069,7 +1039,7 @@ void JFJochStateMachine::SetDarkMaskSettings(const DarkMaskSettings &settings) {
     if ((experiment.GetDetectorType() == DetectorType::DECTRIS) && (state == JFJochState::Idle)) {
         // Need to redo the calibration
         SetState(JFJochState::Busy, "Loading settings", BrokerStatus::MessageSeverity::Info);
-        measurement = std::async(std::launch::async, &JFJochStateMachine::CalibrateDetector, this, std::move(ul));
+        measurement = std::async(std::launch::async, &JFJochStateMachine::PedestalThread, this, std::move(ul));
     }
 }
 

broker/JFJochStateMachine.h

@@ -25,9 +25,9 @@ struct DetectorListElement {
     int64_t nmodules;
     int64_t width;
     int64_t height;
-    std::chrono::nanoseconds readout_time;
-    std::chrono::nanoseconds min_frame_time;
-    std::chrono::nanoseconds min_count_time;
+    std::chrono::microseconds readout_time;
+    std::chrono::microseconds min_frame_time;
+    std::chrono::microseconds min_count_time;
     DetectorType detector_type;
     float pixel_size_mm;
 };
@@ -127,13 +127,14 @@ class JFJochStateMachine {
         const std::optional<std::string> &message = {},
         BrokerStatus::MessageSeverity message_severity = BrokerStatus::MessageSeverity::Info);
     void MeasurementThread();
+    void PedestalThread(std::unique_lock<std::mutex> ul);
     void InitializeThread(std::unique_lock<std::mutex> ul);
     bool ImportPedestalG1G2(const JFJochReceiverOutput &receiver_output, size_t gain_level, size_t storage_cell = 0);
     bool ImportPedestalG0(const JFJochReceiverOutput &receiver_output);
     bool IsRunning() const; // Is state Busy/Pedestal/Measure
     void ResetError() noexcept;
     void TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul);
-    void CalibrateDetector(std::unique_lock<std::mutex> ul);
+    void CalibrateDetector(std::unique_lock<std::mutex> &ul);
     void CalibrateJUNGFRAU(std::unique_lock<std::mutex> &ul);
     void TakePedestalInternalG0(std::unique_lock<std::mutex> &ul);
     void TakePedestalInternalG1(std::unique_lock<std::mutex> &ul, int32_t storage_cell = 0);
@@ -151,9 +152,7 @@ public:
     void Initialize();
     void Pedestal();
     void Deactivate();
-    void Start(const DatasetSettings& settings, bool async = false);
-    BrokerStatus WaitTillNotBusy(std::chrono::milliseconds timeout);
-
+    void Start(const DatasetSettings& settings);
     BrokerStatus WaitTillMeasurementDone();
     BrokerStatus WaitTillMeasurementDone(std::chrono::milliseconds timeout);
     void Trigger();

broker/OpenAPIConvert.cpp

@@ -87,8 +87,8 @@ org::openapitools::server::model::Measurement_statistics Convert(const Measureme
         ret.setBkgEstimate(input.bkg_estimate.value());
     ret.setUnitCell(input.unit_cell);
     ret.setRunNumber(input.run_number);
-    if (input.images_written)
-        ret.setImagesWritten(input.images_written.value());
+    
+    
     return ret;
 }
 
@@ -170,12 +170,9 @@ DetectorSettings Convert(const org::openapitools::server::model::Detector_settin
 org::openapitools::server::model::Detector_settings Convert(const DetectorSettings &input) {
     org::openapitools::server::model::Detector_settings ret{};
 
-    ret.setFrameTimeUs(std::chrono::round<std::chrono::microseconds>(
-        std::chrono::duration<float>(input.GetFrameTime())).count());
+    ret.setFrameTimeUs(input.GetFrameTime().count());
     if (input.GetCountTime().has_value())
-        ret.setCountTimeUs(std::chrono::round<std::chrono::microseconds>(
-            std::chrono::duration<float>(input.GetCountTime().value())
-        ).count());
+        ret.setCountTimeUs(input.GetCountTime()->count());
     ret.setDetectorTriggerDelayNs(input.GetDetectorDelay().count());
     ret.setInternalFrameGeneratorImages(input.GetInternalGeneratorImages());
     ret.setInternalFrameGenerator(input.IsInternalGeneratorEnable());
@@ -373,9 +370,9 @@ org::openapitools::server::model::Detector_list Convert(const DetectorList &inpu
         d.setSerialNumber(input.detector[i].serial_number);
         d.setBaseIpv4Addr(input.detector[i].base_ipv4_addr);
         d.setUdpInterfaceCount(input.detector[i].udp_interface_count);
-        d.setMinFrameTimeNs(input.detector[i].min_frame_time.count());
-        d.setMinCountTimeNs(input.detector[i].min_count_time.count());
-        d.setReadoutTimeNs(input.detector[i].readout_time.count());
+        d.setMinFrameTimeUs(input.detector[i].min_frame_time.count());
+        d.setMinCountTimeUs(input.detector[i].min_count_time.count());
+        d.setReadoutTimeUs(input.detector[i].readout_time.count());
         d.setPixelSizeMm(input.detector[i].pixel_size_mm);
         d.setType(Convert(input.detector[i].detector_type));
         dets.emplace_back(std::move(d));
@@ -728,7 +725,7 @@ org::openapitools::server::model::Zeromq_preview_settings Convert(const ZMQPrevi
     org::openapitools::server::model::Zeromq_preview_settings ret;
     ret.setEnabled(settings.period.has_value());
     if (settings.period.has_value())
-        ret.setPeriodMs(std::chrono::round<std::chrono::milliseconds>(settings.period.value()).count());
+        ret.setPeriodMs(settings.period.value().count() / 1000);
     ret.setSocketAddress(settings.address);
     return ret;
 }
@@ -737,7 +734,7 @@ org::openapitools::server::model::Zeromq_metadata_settings Convert(const ZMQMeta
     org::openapitools::server::model::Zeromq_metadata_settings ret;
     ret.setEnabled(settings.period.has_value());
     if (settings.period.has_value())
-        ret.setPeriodMs(std::chrono::round<std::chrono::milliseconds>(settings.period.value()).count());
+        ret.setPeriodMs(settings.period.value().count() / 1000);
     ret.setSocketAddress(settings.address);
     return ret;
 }
@@ -782,7 +779,7 @@ ImageBufferStatus Convert(const org::openapitools::server::model::Image_buffer_s
 
 org::openapitools::server::model::File_writer_settings Convert(const FileWriterSettings& input) {
     org::openapitools::server::model::File_writer_settings ret;
-    ret.setFormat(Convert(input.GetFileFormat()));
+    ret.setFormat(Convert(input.GetHDF5MasterFormatVersion()));
     ret.setOverwrite(input.IsOverwriteExistingFiles());
     return ret;
 }
@@ -790,7 +787,7 @@ org::openapitools::server::model::File_writer_settings Convert(const FileWriterS
 FileWriterSettings Convert(const org::openapitools::server::model::File_writer_settings &input) {
     FileWriterSettings ret;
     ret.OverwriteExistingFiles(input.isOverwrite());
-    ret.FileFormat(Convert(input.getFormat()));
+    ret.HDF5MasterFormatVersion(Convert(input.getFormat()));
     return ret;
 }
 
@@ -882,8 +879,6 @@ PlotType ConvertPlotType(const std::optional<std::string>& input) {
     if (input == "processing_time") return PlotType::ImageProcessingTime;
     if (input == "beam_center_x") return PlotType::RefinementBeamX;
     if (input == "beam_center_y") return PlotType::RefinementBeamY;
-    if (input == "integrated_reflections") return PlotType::IntegratedReflections;
-
     throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
                           "Plot type not recognized");
 }
@@ -952,12 +947,10 @@ IndexingSettings Convert(const org::openapitools::server::model::Indexing_settin
     ret.Tolerance(input.getTolerance());
     ret.IndexingThreads(input.getThreadCount());
     ret.UnitCellDistTolerance(input.getUnitCellDistTolerance());
-    ret.ViableCellMinSpots(input.getViableCellMinSpots());
     ret.IndexIceRings(input.isIndexIceRings());
     ret.RotationIndexing(input.isRotationIndexing());
     ret.RotationIndexingAngularStride_deg(input.getRotationIndexingAngularStrideDeg());
     ret.RotationIndexingMinAngularRange_deg(input.getRotationIndexingMinAngularRangeDeg());
-    ret.BlockingBehavior(input.isBlocking());
     return ret;
 }
 
@@ -971,11 +964,9 @@ org::openapitools::server::model::Indexing_settings Convert(const IndexingSettin
     ret.setTolerance(input.GetTolerance());
     ret.setThreadCount(input.GetIndexingThreads());
     ret.setUnitCellDistTolerance(input.GetUnitCellDistTolerance());
-    ret.setViableCellMinSpots(input.GetViableCellMinSpots());
     ret.setRotationIndexing(input.GetRotationIndexing());
     ret.setRotationIndexingAngularStrideDeg(input.GetRotationIndexingAngularStride_deg());
     ret.setRotationIndexingMinAngularRangeDeg(input.GetRotationIndexingMinAngularRange_deg());
-    ret.setBlocking(input.GetBlockingBehavior());
 
     org::openapitools::server::model::Geom_refinement_algorithm refinement;
     switch (input.GetGeomRefinementAlgorithm()) {
@@ -1087,9 +1078,7 @@ org::openapitools::server::model::Scan_result Convert(const ScanResult& input) {
 org::openapitools::server::model::Dark_mask_settings Convert(const DarkMaskSettings &input) {
     org::openapitools::server::model::Dark_mask_settings ret{};
     ret.setDetectorThresholdKeV(input.GetThreshold_keV());
-    ret.setFrameTimeUs(std::chrono::round<std::chrono::microseconds>(
-        std::chrono::duration<float>(input.GetFrameTime())
-    ).count());
+    ret.setFrameTimeUs(input.GetFrameTime().count());
     ret.setMaxFramesWithSignal(input.GetMaxFramesWithCounts());
     ret.setMaxAllowedPixelCount(input.GetMaxCounts());
     ret.setNumberOfFrames(input.GetNumberOfFrames());

broker/gen/model/Azim_int_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Azim_int_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dark_mask_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dark_mask_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -84,8 +84,6 @@ Dataset_settings::Dataset_settings()
     m_Max_spot_countIsSet = false;
     m_Detect_ice_rings = false;
     m_Detect_ice_ringsIsSet = false;
-    m_Async_start = false;
-    m_Async_startIsSet = false;
     m_Xray_fluorescence_spectrumIsSet = false;
     
 }
@@ -425,7 +423,7 @@ bool Dataset_settings::validate(std::stringstream& msg, const std::string& pathP
         }
 
     }
-                
+            
     return success;
 }
 
@@ -543,9 +541,6 @@ bool Dataset_settings::operator==(const Dataset_settings& rhs) const
     ((!detectIceRingsIsSet() && !rhs.detectIceRingsIsSet()) || (detectIceRingsIsSet() && rhs.detectIceRingsIsSet() && isDetectIceRings() == rhs.isDetectIceRings())) &&
     
     
-    ((!asyncStartIsSet() && !rhs.asyncStartIsSet()) || (asyncStartIsSet() && rhs.asyncStartIsSet() && isAsyncStart() == rhs.isAsyncStart())) &&
-    
-    
     ((!xrayFluorescenceSpectrumIsSet() && !rhs.xrayFluorescenceSpectrumIsSet()) || (xrayFluorescenceSpectrumIsSet() && rhs.xrayFluorescenceSpectrumIsSet() && getXrayFluorescenceSpectrum() == rhs.getXrayFluorescenceSpectrum()))
     
     ;
@@ -627,8 +622,6 @@ void to_json(nlohmann::json& j, const Dataset_settings& o)
         j["max_spot_count"] = o.m_Max_spot_count;
     if(o.detectIceRingsIsSet())
         j["detect_ice_rings"] = o.m_Detect_ice_rings;
-    if(o.asyncStartIsSet())
-        j["async_start"] = o.m_Async_start;
     if(o.xrayFluorescenceSpectrumIsSet())
         j["xray_fluorescence_spectrum"] = o.m_Xray_fluorescence_spectrum;
     
@@ -800,11 +793,6 @@ void from_json(const nlohmann::json& j, Dataset_settings& o)
         j.at("detect_ice_rings").get_to(o.m_Detect_ice_rings);
         o.m_Detect_ice_ringsIsSet = true;
     } 
-    if(j.find("async_start") != j.end())
-    {
-        j.at("async_start").get_to(o.m_Async_start);
-        o.m_Async_startIsSet = true;
-    } 
     if(j.find("xray_fluorescence_spectrum") != j.end())
     {
         j.at("xray_fluorescence_spectrum").get_to(o.m_Xray_fluorescence_spectrum);
@@ -1389,23 +1377,6 @@ void Dataset_settings::unsetDetect_ice_rings()
 {
     m_Detect_ice_ringsIsSet = false;
 }
-bool Dataset_settings::isAsyncStart() const
-{
-    return m_Async_start;
-}
-void Dataset_settings::setAsyncStart(bool const value)
-{
-    m_Async_start = value;
-    m_Async_startIsSet = true;
-}
-bool Dataset_settings::asyncStartIsSet() const
-{
-    return m_Async_startIsSet;
-}
-void Dataset_settings::unsetAsync_start()
-{
-    m_Async_startIsSet = false;
-}
 org::openapitools::server::model::Dataset_settings_xray_fluorescence_spectrum Dataset_settings::getXrayFluorescenceSpectrum() const
 {
     return m_Xray_fluorescence_spectrum;

broker/gen/model/Dataset_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -308,13 +308,6 @@ public:
     bool detectIceRingsIsSet() const;
     void unsetDetect_ice_rings();
     /// <summary>
-    /// When set to true, &#x60;/start&#x60; will not wait for detector and Jungfraujoch to be ready for the measurement.
-    /// </summary>
-    bool isAsyncStart() const;
-    void setAsyncStart(bool const value);
-    bool asyncStartIsSet() const;
-    void unsetAsync_start();
-    /// <summary>
     /// 
     /// </summary>
     org::openapitools::server::model::Dataset_settings_xray_fluorescence_spectrum getXrayFluorescenceSpectrum() const;
@@ -397,8 +390,6 @@ protected:
     bool m_Max_spot_countIsSet;
     bool m_Detect_ice_rings;
     bool m_Detect_ice_ringsIsSet;
-    bool m_Async_start;
-    bool m_Async_startIsSet;
     org::openapitools::server::model::Dataset_settings_xray_fluorescence_spectrum m_Xray_fluorescence_spectrum;
     bool m_Xray_fluorescence_spectrumIsSet;
     

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -33,12 +33,12 @@ Detector::Detector()
     m_Module_syncIsSet = false;
     m_Sensor_thickness_um = 320.0f;
     m_Sensor_thickness_umIsSet = false;
-    m_Readout_time_ns = 0L;
-    m_Readout_time_nsIsSet = false;
-    m_Min_count_time_ns = 0L;
-    m_Min_count_time_nsIsSet = false;
-    m_Min_frame_time_ns = 0L;
-    m_Min_frame_time_nsIsSet = false;
+    m_Readout_time_us = 0L;
+    m_Readout_time_usIsSet = false;
+    m_Minimum_count_time_us = 0L;
+    m_Minimum_count_time_usIsSet = false;
+    m_Minimum_frame_time_us = 0L;
+    m_Minimum_frame_time_usIsSet = false;
     m_Calibration_fileIsSet = false;
     m_HostnameIsSet = false;
     m_Sensor_material = "Si";
@@ -158,10 +158,10 @@ bool Detector::validate(std::stringstream& msg, const std::string& pathPrefix) c
 
     }
          
-    if (readoutTimeNsIsSet())
+    if (readoutTimeUsIsSet())
     {
-        const int64_t& value = m_Readout_time_ns;
-        const std::string currentValuePath = _pathPrefix + ".readoutTimeNs";
+        const int64_t& value = m_Readout_time_us;
+        const std::string currentValuePath = _pathPrefix + ".readoutTimeUs";
                 
         
         if (value < 1ll)
@@ -172,10 +172,10 @@ bool Detector::validate(std::stringstream& msg, const std::string& pathPrefix) c
 
     }
          
-    if (minCountTimeNsIsSet())
+    if (minimumCountTimeUsIsSet())
     {
-        const int64_t& value = m_Min_count_time_ns;
-        const std::string currentValuePath = _pathPrefix + ".minCountTimeNs";
+        const int64_t& value = m_Minimum_count_time_us;
+        const std::string currentValuePath = _pathPrefix + ".minimumCountTimeUs";
                 
         
         if (value < 0ll)
@@ -186,10 +186,10 @@ bool Detector::validate(std::stringstream& msg, const std::string& pathPrefix) c
 
     }
          
-    if (minFrameTimeNsIsSet())
+    if (minimumFrameTimeUsIsSet())
     {
-        const int64_t& value = m_Min_frame_time_ns;
-        const std::string currentValuePath = _pathPrefix + ".minFrameTimeNs";
+        const int64_t& value = m_Minimum_frame_time_us;
+        const std::string currentValuePath = _pathPrefix + ".minimumFrameTimeUs";
                 
         
         if (value < 0ll)
@@ -333,13 +333,13 @@ bool Detector::operator==(const Detector& rhs) const
     ((!sensorThicknessUmIsSet() && !rhs.sensorThicknessUmIsSet()) || (sensorThicknessUmIsSet() && rhs.sensorThicknessUmIsSet() && getSensorThicknessUm() == rhs.getSensorThicknessUm())) &&
     
     
-    ((!readoutTimeNsIsSet() && !rhs.readoutTimeNsIsSet()) || (readoutTimeNsIsSet() && rhs.readoutTimeNsIsSet() && getReadoutTimeNs() == rhs.getReadoutTimeNs())) &&
+    ((!readoutTimeUsIsSet() && !rhs.readoutTimeUsIsSet()) || (readoutTimeUsIsSet() && rhs.readoutTimeUsIsSet() && getReadoutTimeUs() == rhs.getReadoutTimeUs())) &&
     
     
-    ((!minCountTimeNsIsSet() && !rhs.minCountTimeNsIsSet()) || (minCountTimeNsIsSet() && rhs.minCountTimeNsIsSet() && getMinCountTimeNs() == rhs.getMinCountTimeNs())) &&
+    ((!minimumCountTimeUsIsSet() && !rhs.minimumCountTimeUsIsSet()) || (minimumCountTimeUsIsSet() && rhs.minimumCountTimeUsIsSet() && getMinimumCountTimeUs() == rhs.getMinimumCountTimeUs())) &&
     
     
-    ((!minFrameTimeNsIsSet() && !rhs.minFrameTimeNsIsSet()) || (minFrameTimeNsIsSet() && rhs.minFrameTimeNsIsSet() && getMinFrameTimeNs() == rhs.getMinFrameTimeNs())) &&
+    ((!minimumFrameTimeUsIsSet() && !rhs.minimumFrameTimeUsIsSet()) || (minimumFrameTimeUsIsSet() && rhs.minimumFrameTimeUsIsSet() && getMinimumFrameTimeUs() == rhs.getMinimumFrameTimeUs())) &&
     
     
     ((!calibrationFileIsSet() && !rhs.calibrationFileIsSet()) || (calibrationFileIsSet() && rhs.calibrationFileIsSet() && getCalibrationFile() == rhs.getCalibrationFile())) &&
@@ -398,12 +398,12 @@ void to_json(nlohmann::json& j, const Detector& o)
         j["module_sync"] = o.m_Module_sync;
     if(o.sensorThicknessUmIsSet())
         j["sensor_thickness_um"] = o.m_Sensor_thickness_um;
-    if(o.readoutTimeNsIsSet())
-        j["readout_time_ns"] = o.m_Readout_time_ns;
-    if(o.minCountTimeNsIsSet())
-        j["min_count_time_ns"] = o.m_Min_count_time_ns;
-    if(o.minFrameTimeNsIsSet())
-        j["min_frame_time_ns"] = o.m_Min_frame_time_ns;
+    if(o.readoutTimeUsIsSet())
+        j["readout_time_us"] = o.m_Readout_time_us;
+    if(o.minimumCountTimeUsIsSet())
+        j["minimum_count_time_us"] = o.m_Minimum_count_time_us;
+    if(o.minimumFrameTimeUsIsSet())
+        j["minimum_frame_time_us"] = o.m_Minimum_frame_time_us;
     if(o.calibrationFileIsSet() || !o.m_Calibration_file.empty())
         j["calibration_file"] = o.m_Calibration_file;
     if(o.hostnameIsSet() || !o.m_Hostname.empty())
@@ -462,20 +462,20 @@ void from_json(const nlohmann::json& j, Detector& o)
         j.at("sensor_thickness_um").get_to(o.m_Sensor_thickness_um);
         o.m_Sensor_thickness_umIsSet = true;
     } 
-    if(j.find("readout_time_ns") != j.end())
+    if(j.find("readout_time_us") != j.end())
     {
-        j.at("readout_time_ns").get_to(o.m_Readout_time_ns);
-        o.m_Readout_time_nsIsSet = true;
+        j.at("readout_time_us").get_to(o.m_Readout_time_us);
+        o.m_Readout_time_usIsSet = true;
     } 
-    if(j.find("min_count_time_ns") != j.end())
+    if(j.find("minimum_count_time_us") != j.end())
     {
-        j.at("min_count_time_ns").get_to(o.m_Min_count_time_ns);
-        o.m_Min_count_time_nsIsSet = true;
+        j.at("minimum_count_time_us").get_to(o.m_Minimum_count_time_us);
+        o.m_Minimum_count_time_usIsSet = true;
     } 
-    if(j.find("min_frame_time_ns") != j.end())
+    if(j.find("minimum_frame_time_us") != j.end())
     {
-        j.at("min_frame_time_ns").get_to(o.m_Min_frame_time_ns);
-        o.m_Min_frame_time_nsIsSet = true;
+        j.at("minimum_frame_time_us").get_to(o.m_Minimum_frame_time_us);
+        o.m_Minimum_frame_time_usIsSet = true;
     } 
     if(j.find("calibration_file") != j.end())
     {
@@ -645,56 +645,56 @@ void Detector::unsetSensor_thickness_um()
 {
     m_Sensor_thickness_umIsSet = false;
 }
-int64_t Detector::getReadoutTimeNs() const
+int64_t Detector::getReadoutTimeUs() const
 {
-    return m_Readout_time_ns;
+    return m_Readout_time_us;
 }
-void Detector::setReadoutTimeNs(int64_t const value)
+void Detector::setReadoutTimeUs(int64_t const value)
 {
-    m_Readout_time_ns = value;
-    m_Readout_time_nsIsSet = true;
+    m_Readout_time_us = value;
+    m_Readout_time_usIsSet = true;
 }
-bool Detector::readoutTimeNsIsSet() const
+bool Detector::readoutTimeUsIsSet() const
 {
-    return m_Readout_time_nsIsSet;
+    return m_Readout_time_usIsSet;
 }
-void Detector::unsetReadout_time_ns()
+void Detector::unsetReadout_time_us()
 {
-    m_Readout_time_nsIsSet = false;
+    m_Readout_time_usIsSet = false;
 }
-int64_t Detector::getMinCountTimeNs() const
+int64_t Detector::getMinimumCountTimeUs() const
 {
-    return m_Min_count_time_ns;
+    return m_Minimum_count_time_us;
 }
-void Detector::setMinCountTimeNs(int64_t const value)
+void Detector::setMinimumCountTimeUs(int64_t const value)
 {
-    m_Min_count_time_ns = value;
-    m_Min_count_time_nsIsSet = true;
+    m_Minimum_count_time_us = value;
+    m_Minimum_count_time_usIsSet = true;
 }
-bool Detector::minCountTimeNsIsSet() const
+bool Detector::minimumCountTimeUsIsSet() const
 {
-    return m_Min_count_time_nsIsSet;
+    return m_Minimum_count_time_usIsSet;
 }
-void Detector::unsetMin_count_time_ns()
+void Detector::unsetMinimum_count_time_us()
 {
-    m_Min_count_time_nsIsSet = false;
+    m_Minimum_count_time_usIsSet = false;
 }
-int64_t Detector::getMinFrameTimeNs() const
+int64_t Detector::getMinimumFrameTimeUs() const
 {
-    return m_Min_frame_time_ns;
+    return m_Minimum_frame_time_us;
 }
-void Detector::setMinFrameTimeNs(int64_t const value)
+void Detector::setMinimumFrameTimeUs(int64_t const value)
 {
-    m_Min_frame_time_ns = value;
-    m_Min_frame_time_nsIsSet = true;
+    m_Minimum_frame_time_us = value;
+    m_Minimum_frame_time_usIsSet = true;
 }
-bool Detector::minFrameTimeNsIsSet() const
+bool Detector::minimumFrameTimeUsIsSet() const
 {
-    return m_Min_frame_time_nsIsSet;
+    return m_Minimum_frame_time_usIsSet;
 }
-void Detector::unsetMin_frame_time_ns()
+void Detector::unsetMinimum_frame_time_us()
 {
-    m_Min_frame_time_nsIsSet = false;
+    m_Minimum_frame_time_usIsSet = false;
 }
 std::vector<std::string> Detector::getCalibrationFile() const
 {

broker/gen/model/Detector.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -111,26 +111,26 @@ public:
     bool sensorThicknessUmIsSet() const;
     void unsetSensor_thickness_um();
     /// <summary>
-    /// Minimum difference between frame time and count time in microseconds Defaults are 3&#39;000 ns for EIGER and 20&#39;000 ns for JUNGFRAU 
+    /// Minimum difference between frame time and count time in microseconds Defaults are 3 us for EIGER and 20 us for JUNGFRAU 
     /// </summary>
-    int64_t getReadoutTimeNs() const;
-    void setReadoutTimeNs(int64_t const value);
-    bool readoutTimeNsIsSet() const;
-    void unsetReadout_time_ns();
+    int64_t getReadoutTimeUs() const;
+    void setReadoutTimeUs(int64_t const value);
+    bool readoutTimeUsIsSet() const;
+    void unsetReadout_time_us();
     /// <summary>
     /// Minimum count time available for the detector.
     /// </summary>
-    int64_t getMinCountTimeNs() const;
-    void setMinCountTimeNs(int64_t const value);
-    bool minCountTimeNsIsSet() const;
-    void unsetMin_count_time_ns();
+    int64_t getMinimumCountTimeUs() const;
+    void setMinimumCountTimeUs(int64_t const value);
+    bool minimumCountTimeUsIsSet() const;
+    void unsetMinimum_count_time_us();
     /// <summary>
     /// Minimum frame time available for the detector.
     /// </summary>
-    int64_t getMinFrameTimeNs() const;
-    void setMinFrameTimeNs(int64_t const value);
-    bool minFrameTimeNsIsSet() const;
-    void unsetMin_frame_time_ns();
+    int64_t getMinimumFrameTimeUs() const;
+    void setMinimumFrameTimeUs(int64_t const value);
+    bool minimumFrameTimeUsIsSet() const;
+    void unsetMinimum_frame_time_us();
     /// <summary>
     /// Can be empty for all detectors - default calibration used. For JUNGFRAU: list of gain files, one entry per module. For EIGER: one directory (with detector settings) or list of trim bit files, one entry per half-module. 
     /// </summary>
@@ -226,12 +226,12 @@ protected:
     bool m_Module_syncIsSet;
     float m_Sensor_thickness_um;
     bool m_Sensor_thickness_umIsSet;
-    int64_t m_Readout_time_ns;
-    bool m_Readout_time_nsIsSet;
-    int64_t m_Min_count_time_ns;
-    bool m_Min_count_time_nsIsSet;
-    int64_t m_Min_frame_time_ns;
-    bool m_Min_frame_time_nsIsSet;
+    int64_t m_Readout_time_us;
+    bool m_Readout_time_usIsSet;
+    int64_t m_Minimum_count_time_us;
+    bool m_Minimum_count_time_usIsSet;
+    int64_t m_Minimum_frame_time_us;
+    bool m_Minimum_frame_time_usIsSet;
     std::vector<std::string> m_Calibration_file;
     bool m_Calibration_fileIsSet;
     std::vector<std::string> m_Hostname;

broker/gen/model/Detector_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list_element.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -31,9 +31,9 @@ Detector_list_element::Detector_list_element()
     m_Height = 0L;
     m_Pixel_size_mm = 0.0f;
     m_Pixel_size_mmIsSet = false;
-    m_Readout_time_ns = 0L;
-    m_Min_frame_time_ns = 0L;
-    m_Min_count_time_ns = 0L;
+    m_Readout_time_us = 0L;
+    m_Min_frame_time_us = 0L;
+    m_Min_count_time_us = 0L;
     m_TypeIsSet = false;
     
 }
@@ -107,13 +107,13 @@ bool Detector_list_element::operator==(const Detector_list_element& rhs) const
     
     ((!pixelSizeMmIsSet() && !rhs.pixelSizeMmIsSet()) || (pixelSizeMmIsSet() && rhs.pixelSizeMmIsSet() && getPixelSizeMm() == rhs.getPixelSizeMm())) &&
     
-    (getReadoutTimeNs() == rhs.getReadoutTimeNs())
+    (getReadoutTimeUs() == rhs.getReadoutTimeUs())
      &&
     
-    (getMinFrameTimeNs() == rhs.getMinFrameTimeNs())
+    (getMinFrameTimeUs() == rhs.getMinFrameTimeUs())
      &&
     
-    (getMinCountTimeNs() == rhs.getMinCountTimeNs())
+    (getMinCountTimeUs() == rhs.getMinCountTimeUs())
      &&
     
     
@@ -140,9 +140,9 @@ void to_json(nlohmann::json& j, const Detector_list_element& o)
     j["height"] = o.m_Height;
     if(o.pixelSizeMmIsSet())
         j["pixel_size_mm"] = o.m_Pixel_size_mm;
-    j["readout_time_ns"] = o.m_Readout_time_ns;
-    j["min_frame_time_ns"] = o.m_Min_frame_time_ns;
-    j["min_count_time_ns"] = o.m_Min_count_time_ns;
+    j["readout_time_us"] = o.m_Readout_time_us;
+    j["min_frame_time_us"] = o.m_Min_frame_time_us;
+    j["min_count_time_us"] = o.m_Min_count_time_us;
     if(o.typeIsSet())
         j["type"] = o.m_Type;
     
@@ -163,9 +163,9 @@ void from_json(const nlohmann::json& j, Detector_list_element& o)
         j.at("pixel_size_mm").get_to(o.m_Pixel_size_mm);
         o.m_Pixel_size_mmIsSet = true;
     } 
-    j.at("readout_time_ns").get_to(o.m_Readout_time_ns);
-    j.at("min_frame_time_ns").get_to(o.m_Min_frame_time_ns);
-    j.at("min_count_time_ns").get_to(o.m_Min_count_time_ns);
+    j.at("readout_time_us").get_to(o.m_Readout_time_us);
+    j.at("min_frame_time_us").get_to(o.m_Min_frame_time_us);
+    j.at("min_count_time_us").get_to(o.m_Min_count_time_us);
     if(j.find("type") != j.end())
     {
         j.at("type").get_to(o.m_Type);
@@ -255,29 +255,29 @@ void Detector_list_element::unsetPixel_size_mm()
 {
     m_Pixel_size_mmIsSet = false;
 }
-int64_t Detector_list_element::getReadoutTimeNs() const
+int64_t Detector_list_element::getReadoutTimeUs() const
 {
-    return m_Readout_time_ns;
+    return m_Readout_time_us;
 }
-void Detector_list_element::setReadoutTimeNs(int64_t const value)
+void Detector_list_element::setReadoutTimeUs(int64_t const value)
 {
-    m_Readout_time_ns = value;
+    m_Readout_time_us = value;
 }
-int64_t Detector_list_element::getMinFrameTimeNs() const
+int64_t Detector_list_element::getMinFrameTimeUs() const
 {
-    return m_Min_frame_time_ns;
+    return m_Min_frame_time_us;
 }
-void Detector_list_element::setMinFrameTimeNs(int64_t const value)
+void Detector_list_element::setMinFrameTimeUs(int64_t const value)
 {
-    m_Min_frame_time_ns = value;
+    m_Min_frame_time_us = value;
 }
-int64_t Detector_list_element::getMinCountTimeNs() const
+int64_t Detector_list_element::getMinCountTimeUs() const
 {
-    return m_Min_count_time_ns;
+    return m_Min_count_time_us;
 }
-void Detector_list_element::setMinCountTimeNs(int64_t const value)
+void Detector_list_element::setMinCountTimeUs(int64_t const value)
 {
-    m_Min_count_time_ns = value;
+    m_Min_count_time_us = value;
 }
 org::openapitools::server::model::Detector_type Detector_list_element::getType() const
 {

broker/gen/model/Detector_list_element.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -109,18 +109,18 @@ public:
     /// <summary>
     /// 
     /// </summary>
-    int64_t getReadoutTimeNs() const;
-    void setReadoutTimeNs(int64_t const value);
+    int64_t getReadoutTimeUs() const;
+    void setReadoutTimeUs(int64_t const value);
     /// <summary>
     /// 
     /// </summary>
-    int64_t getMinFrameTimeNs() const;
-    void setMinFrameTimeNs(int64_t const value);
+    int64_t getMinFrameTimeUs() const;
+    void setMinFrameTimeUs(int64_t const value);
     /// <summary>
     /// 
     /// </summary>
-    int64_t getMinCountTimeNs() const;
-    void setMinCountTimeNs(int64_t const value);
+    int64_t getMinCountTimeUs() const;
+    void setMinCountTimeUs(int64_t const value);
     /// <summary>
     /// 
     /// </summary>
@@ -150,11 +150,11 @@ protected:
 
     float m_Pixel_size_mm;
     bool m_Pixel_size_mmIsSet;
-    int64_t m_Readout_time_ns;
+    int64_t m_Readout_time_us;
 
-    int64_t m_Min_frame_time_ns;
+    int64_t m_Min_frame_time_us;
 
-    int64_t m_Min_count_time_ns;
+    int64_t m_Min_count_time_us;
 
     org::openapitools::server::model::Detector_type m_Type;
     bool m_TypeIsSet;

broker/gen/model/Detector_module.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -33,7 +33,6 @@ Indexing_settings::Indexing_settings()
     m_Rotation_indexing = false;
     m_Rotation_indexing_min_angular_range_deg = 20.0f;
     m_Rotation_indexing_angular_stride_deg = 0.5f;
-    m_Blocking = true;
     
 }
 
@@ -226,7 +225,7 @@ bool Indexing_settings::validate(std::stringstream& msg, const std::string& path
         }
 
     }
-        
+    
     return success;
 }
 
@@ -275,9 +274,6 @@ bool Indexing_settings::operator==(const Indexing_settings& rhs) const
      &&
     
     (getRotationIndexingAngularStrideDeg() == rhs.getRotationIndexingAngularStrideDeg())
-     &&
-    
-    (isBlocking() == rhs.isBlocking())
     
     
     ;
@@ -305,7 +301,6 @@ void to_json(nlohmann::json& j, const Indexing_settings& o)
     j["rotation_indexing"] = o.m_Rotation_indexing;
     j["rotation_indexing_min_angular_range_deg"] = o.m_Rotation_indexing_min_angular_range_deg;
     j["rotation_indexing_angular_stride_deg"] = o.m_Rotation_indexing_angular_stride_deg;
-    j["blocking"] = o.m_Blocking;
     
 }
 
@@ -325,7 +320,6 @@ void from_json(const nlohmann::json& j, Indexing_settings& o)
     j.at("rotation_indexing").get_to(o.m_Rotation_indexing);
     j.at("rotation_indexing_min_angular_range_deg").get_to(o.m_Rotation_indexing_min_angular_range_deg);
     j.at("rotation_indexing_angular_stride_deg").get_to(o.m_Rotation_indexing_angular_stride_deg);
-    j.at("blocking").get_to(o.m_Blocking);
     
 }
 
@@ -441,14 +435,6 @@ void Indexing_settings::setRotationIndexingAngularStrideDeg(float const value)
 {
     m_Rotation_indexing_angular_stride_deg = value;
 }
-bool Indexing_settings::isBlocking() const
-{
-    return m_Blocking;
-}
-void Indexing_settings::setBlocking(bool const value)
-{
-    m_Blocking = value;
-}
 
 
 } // namespace org::openapitools::server::model

broker/gen/model/Indexing_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -129,11 +129,6 @@ public:
     /// </summary>
     float getRotationIndexingAngularStrideDeg() const;
     void setRotationIndexingAngularStrideDeg(float const value);
-    /// <summary>
-    /// Indexing in Jungfraujoch goes with a dedicated thread pool. If set to false, the thread pool is non-blocking, i.e. if there are no threads available, image indexing will be skipped. This option is recommended for real-time processing at high frame rates. If set to true, the thread pool will block until a thread is available. 
-    /// </summary>
-    bool isBlocking() const;
-    void setBlocking(bool const value);
 
     friend  void to_json(nlohmann::json& j, const Indexing_settings& o);
     friend  void from_json(const nlohmann::json& j, Indexing_settings& o);
@@ -166,8 +161,6 @@ protected:
 
     float m_Rotation_indexing_angular_stride_deg;
 
-    bool m_Blocking;
-
     
 };
 

broker/gen/model/Instrument_metadata.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Instrument_metadata.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Measurement_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Measurement_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.144
+* The version of the OpenAPI document: 1.0.0-rc.134
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).