Revert "jfjoch_viewer: Add 3D image (WIP)"

This reverts commit 563878dde5.

VERSION

@@ -1 +1 @@
-1.0.0-rc.97
+1.0.0-rc.96

broker/JFJochBrokerHttp.cpp

@@ -82,7 +82,7 @@ void JFJochBrokerHttp::wait_till_done_post(const std::optional<int32_t> &timeout
             throw WrongDAQStateException(status.message.value_or("Unknown error"));
         case JFJochState::Measuring:
         case JFJochState::Busy:
-        case JFJochState::Calibration:
+        case JFJochState::Pedestal:
             response.send(Pistache::Http::Code::Gateway_Timeout);
             break;
     }
@@ -412,7 +412,6 @@ void JFJochBrokerHttp::statistics_get(const std::optional<bool> &compression, Pi
     statistics.setAzInt(Convert(state_machine.GetRadialIntegrationSettings()));
     statistics.setBuffer(Convert(state_machine.GetImageBufferStatus()));
     statistics.setIndexing(Convert(state_machine.GetIndexingSettings()));
-    statistics.setDarkMask(Convert(state_machine.GetDarkMaskSettings()));
 
     auto zeromq_prev = state_machine.GetPreviewSocketSettings();
     if (!zeromq_prev.address.empty())
@@ -587,12 +586,3 @@ void JFJochBrokerHttp::result_scan_get(Pistache::Http::ResponseWriter &response)
     else
         response.send(Pistache::Http::Code::Not_Found);
 }
-
-void JFJochBrokerHttp::config_dark_mask_put(const org::openapitools::server::model::Dark_mask_settings &darkMaskSettings, Pistache::Http::ResponseWriter &response) {
-    state_machine.SetDarkMaskSettings(Convert(darkMaskSettings));
-    response.send(Pistache::Http::Code::Ok);
-}
-
-void JFJochBrokerHttp::config_dark_mask_get(Pistache::Http::ResponseWriter &response) {
-    ProcessOutput(Convert(state_machine.GetDarkMaskSettings()), response);
-}

broker/JFJochBrokerHttp.h

@@ -174,10 +174,6 @@ class JFJochBrokerHttp : public org::openapitools::server::api::DefaultApi {
                              Pistache::Http::ResponseWriter &response) override;
 
     void result_scan_get(Pistache::Http::ResponseWriter &response) override;
-
-    void config_dark_mask_get(Pistache::Http::ResponseWriter &response) override;
-    void config_dark_mask_put(const org::openapitools::server::model::Dark_mask_settings &darkMaskSettings,
-        Pistache::Http::ResponseWriter &response) override;
 public:
     JFJochBrokerHttp(const DiffractionExperiment& experiment, std::shared_ptr<Pistache::Rest::Router> &rtr);
     void AddDetectorSetup(const DetectorSetup &setup);

broker/JFJochBrokerParser.cpp

@@ -166,9 +166,6 @@ void ParseFacilityConfiguration(const org::openapitools::server::model::Jfjoch_s
 
     if (j.indexingIsSet())
         experiment.ImportIndexingSettings(Convert(j.getIndexing()));
-
-    if (j.darkMaskIsSet())
-        experiment.ImportDarkMaskSettings(Convert(j.getDarkMask()));
 }
 
 std::unique_ptr<ImagePusher> ParseZMQImagePusher(const org::openapitools::server::model::Jfjoch_settings &j) {

broker/JFJochServices.cpp

@@ -10,14 +10,18 @@ JFJochServices::JFJochServices(Logger &in_logger) : logger(in_logger) {}
 
 void JFJochServices::Start(const DiffractionExperiment& experiment,
                            const PixelMask &pixel_mask,
-                           const JFCalibration *calibration) {
+                           const JFCalibration &calibration) {
     logger.Info("Measurement start for: {}", experiment.GetFilePrefix());
 
     cannot_stop_detector = false;
 
     if (receiver != nullptr) {
         logger.Info("   ... receiver start");
-        receiver->Start(experiment, pixel_mask, calibration);
+        if (experiment.IsJungfrauConvPhotonCnt())
+            receiver->Start(experiment, pixel_mask, &calibration);
+        else
+            receiver->Start(experiment, pixel_mask, nullptr);
+
         if (detector && !experiment.IsUsingInternalPacketGen()) {
             logger.Info("   ... detector start");
             detector->Start(experiment);

broker/JFJochServices.h

@@ -27,7 +27,7 @@ public:
     void ConfigureDetector(const DiffractionExperiment& experiment);
     void Start(const DiffractionExperiment& experiment,
                const PixelMask &pixel_mask,
-               const JFCalibration *calibration = nullptr);
+               const JFCalibration &calibration);
     JFJochServicesOutput Stop();
     void Cancel();
     void Trigger();

broker/JFJochStateMachine.cpp

@@ -11,9 +11,9 @@
 JFJochStateMachine::JFJochStateMachine(const DiffractionExperiment& in_experiment,
                                        JFJochServices &in_services,
                                        Logger &in_logger)
-        : logger(in_logger),
+        : experiment(in_experiment),
+          logger(in_logger),
           services(in_services),
-          experiment(in_experiment),
           pixel_mask(experiment),
           current_detector_setup(0),
           data_processing_settings(DiffractionExperiment::DefaultDataProcessingSettings()),
@@ -59,90 +59,57 @@ bool JFJochStateMachine::ImportPedestalG1G2(const JFJochReceiverOutput &receiver
     return true;
 }
 
-void JFJochStateMachine::CalibrateJUNGFRAU(std::unique_lock<std::mutex> &ul) {
+void JFJochStateMachine::TakePedestalInternalAll(std::unique_lock<std::mutex> &ul) {
+    if (experiment.GetDetectorSetup().GetDetectorType() != DetectorType::JUNGFRAU) {
+        try {
+            calibration.reset();
+            logger.Info("EIGER configuration");
+            services.ConfigureDetector(experiment);
+            logger.Info("   ... done ");
+            SetState(JFJochState::Idle,
+                     "Detector configured",
+                     BrokerStatus::MessageSeverity::Success);
+            return;
+        } catch (const std::exception &e) {
+            logger.Error("Configuration error {}", e.what());
+            SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
+            throw;
+        }
+    }
+
+    calibration = std::make_unique<JFCalibration>(experiment);
+
     if (!gain_calibration.empty()) {
         if (gain_calibration.size() != experiment.GetModulesNum())
-            throw JFJochException(JFJochExceptionCategory::InputParameterInvalid,
-                                  "Mismatch in gain files number");
+            throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "Mismatch in gain files number");
         for (int i = 0; i < gain_calibration.size(); i++)
             calibration->GainCalibration(i) = gain_calibration[i];
     }
 
-    TakePedestalInternalG0(ul);
-    if (!experiment.IsFixedGainG1()) {
-        for (int i = 0; i < experiment.GetStorageCellNumber(); i++) {
-            TakePedestalInternalG1(ul, i);
-            TakePedestalInternalG2(ul, i);
-        }
-    }
-    pixel_mask.LoadDetectorBadPixelMask(experiment, calibration.get());
-}
-
-void JFJochStateMachine::CalibrateDetector(std::unique_lock<std::mutex> &ul) {
     cancel_sequence = false;
 
-    pixel_mask = PixelMask(experiment);
-    UpdatePixelMaskStatistics(pixel_mask.GetStatistics());
+    logger.Info("Pedestal sequence started");
 
-    logger.Info("Calibration sequence started");
     try {
-        if (experiment.GetDetectorType() == DetectorType::EIGER) {
-            // PSI EIGER - only reset calibration
-            calibration.reset();
-        } else if (experiment.GetDetectorType() == DetectorType::DECTRIS) {
-            // DECTRIS - take dark data for mask
-            calibration.reset();
-            TakeDarkMaskInternal(ul);
-        } else {
-            // PSI JUNGFRAU - take pedestal
-            calibration = std::make_unique<JFCalibration>(experiment);
-            CalibrateJUNGFRAU(ul);
+        TakePedestalInternalG0(ul);
+        if (!experiment.IsFixedGainG1()) {
+            for (int i = 0; i < experiment.GetStorageCellNumber(); i++) {
+                TakePedestalInternalG1(ul, i);
+                TakePedestalInternalG2(ul, i);
+            }
         }
-        // Update pixel mask statistics
-        UpdatePixelMaskStatistics(pixel_mask.GetStatistics());
-        // configure detector for standard operation
         services.ConfigureDetector(experiment);
+        pixel_mask.LoadDetectorBadPixelMask(experiment, calibration.get());
+        UpdatePixelMaskStatistics(pixel_mask.GetStatistics());
+        SetState(JFJochState::Idle, "Pedestal sequence done", BrokerStatus::MessageSeverity::Success);
     } catch (const std::exception &e) {
-        logger.Error("Calibration sequence error {}", e.what());
+        logger.Error("Pedestal sequence error {}", e.what());
         SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
         throw;
     }
-    SetState(JFJochState::Idle, "Calibration sequence done", BrokerStatus::MessageSeverity::Success);
-
     logger.Info("Pedestal sequence done");
 }
 
-void JFJochStateMachine::TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul) {
-    if (cancel_sequence) {
-        SetState(JFJochState::Inactive,
-                 "Mask sequence cancelled",
-                 BrokerStatus::MessageSeverity::Warning);
-        return;
-    }
-
-    services.LoadDetectorPixelMask(pixel_mask);
-
-    if (experiment.GetDarkMaskNumberOfFrames() == 0)
-        return;
-
-    DiffractionExperiment local_experiment(experiment);
-    local_experiment.Mode(DetectorMode::DarkMask);
-
-    SetState(JFJochState::Calibration, "Dark sequence for mask calculation", BrokerStatus::MessageSeverity::Info);
-    services.ConfigureDetector(local_experiment);
-    services.Start(local_experiment, pixel_mask, nullptr);
-
-    ul.unlock();
-    // Allow to cancel/abort during the mask data collection
-    auto mask_output = services.Stop();
-    ul.lock();
-
-    if (mask_output.receiver_output.dark_mask_result.size() == local_experiment.GetPixelsNum()) {
-        pixel_mask.LoadDarkBadPixelMask(mask_output.receiver_output.dark_mask_result);
-        SetState(JFJochState::Idle);
-    } else
-        SetState(JFJochState::Error, "Mask not collected properly", BrokerStatus::MessageSeverity::Error);
-}
 
 void JFJochStateMachine::TakePedestalInternalG0(std::unique_lock<std::mutex> &ul) {
     DiffractionExperiment local_experiment(experiment);
@@ -170,9 +137,9 @@ void JFJochStateMachine::TakePedestalInternalG0(std::unique_lock<std::mutex> &ul
     if (local_experiment.GetPedestalG0Frames() == 0)
         return;
 
-    SetState(JFJochState::Calibration, message, BrokerStatus::MessageSeverity::Info);
+    SetState(JFJochState::Pedestal, message, BrokerStatus::MessageSeverity::Info);
     services.ConfigureDetector(local_experiment);
-    services.Start(local_experiment, pixel_mask, calibration.get());
+    services.Start(local_experiment, pixel_mask, *calibration);
 
     services.Trigger();
 
@@ -211,11 +178,11 @@ void JFJochStateMachine::TakePedestalInternalG1(std::unique_lock<std::mutex> &ul
         return;
 
 
-    SetState(JFJochState::Calibration,
+    SetState(JFJochState::Pedestal,
              "Pedestal G1   SC" + std::to_string(storage_cell),
              BrokerStatus::MessageSeverity::Info);
     services.ConfigureDetector(local_experiment);
-    services.Start(local_experiment, pixel_mask, calibration.get());
+    services.Start(local_experiment, pixel_mask, *calibration);
 
     services.Trigger();
 
@@ -251,11 +218,11 @@ void JFJochStateMachine::TakePedestalInternalG2(std::unique_lock<std::mutex> &ul
         return;
 
 
-    SetState(JFJochState::Calibration,
+    SetState(JFJochState::Pedestal,
              "Pedestal G2   SC" + std::to_string(storage_cell),
              BrokerStatus::MessageSeverity::Info);
     services.ConfigureDetector(local_experiment);
-    services.Start(local_experiment, pixel_mask, calibration.get());
+    services.Start(local_experiment, pixel_mask, *calibration);
 
     services.Trigger();
 
@@ -309,7 +276,7 @@ void JFJochStateMachine::Pedestal() {
 
 
 void JFJochStateMachine::PedestalThread(std::unique_lock<std::mutex> ul) {
-    CalibrateDetector(ul);
+    TakePedestalInternalAll(ul);
 }
 
 void JFJochStateMachine::InitializeThread(std::unique_lock<std::mutex> ul) {
@@ -325,14 +292,17 @@ void JFJochStateMachine::InitializeThread(std::unique_lock<std::mutex> ul) {
         ul.lock();
 
         experiment = local_experiment;
-        detector_setup[current_detector_setup] = experiment.GetDetectorSetup();
 
+        detector_setup[current_detector_setup] = experiment.GetDetectorSetup();
+        pixel_mask = PixelMask(experiment);
+        services.LoadDetectorPixelMask(pixel_mask);
+        UpdatePixelMaskStatistics(pixel_mask.GetStatistics());
     } catch (const std::exception &e) {
         logger.Error("Initialize error {}", e.what());
         SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
         throw;
     }
-    CalibrateDetector(ul);
+    TakePedestalInternalAll(ul);
 }
 
 void JFJochStateMachine::Trigger() {
@@ -361,7 +331,7 @@ void JFJochStateMachine::Start(const DatasetSettings &settings) {
     try {
         SetState(JFJochState::Busy, "Preparing measurement", BrokerStatus::MessageSeverity::Info);
         services.SetSpotFindingSettings(GetSpotFindingSettings());
-        services.Start(experiment, pixel_mask, calibration.get());
+        services.Start(experiment, pixel_mask, *calibration);
 
         SetState(JFJochState::Measuring, "Measuring ...", BrokerStatus::MessageSeverity::Info);
         measurement = std::async(std::launch::async, &JFJochStateMachine::MeasurementThread, this);
@@ -420,7 +390,7 @@ void JFJochStateMachine::MeasurementThread() {
 void JFJochStateMachine::Cancel() {
     // This is inconsistency in naming - need to solve later
     std::unique_lock ul(m);
-    if ((state == JFJochState::Calibration) || (state == JFJochState::Measuring)) {
+    if ((state == JFJochState::Pedestal) || (state == JFJochState::Measuring)) {
         services.Cancel();
         cancel_sequence = true;
     }
@@ -536,7 +506,7 @@ void JFJochStateMachine::LoadDetectorSettings(const DetectorSettings &settings)
             break;
         case JFJochState::Measuring:
         case JFJochState::Busy:
-        case JFJochState::Calibration:
+        case JFJochState::Pedestal:
             throw WrongDAQStateException("Cannot change detector settings during data collection");
     }
 }
@@ -691,7 +661,7 @@ bool JFJochStateMachine::IsRunning() const {
             return false;
         case JFJochState::Measuring:
         case JFJochState::Busy:
-        case JFJochState::Calibration:
+        case JFJochState::Pedestal:
             return true;
         default:
             throw JFJochException(JFJochExceptionCategory::InputParameterInvalid, "State unknown");
@@ -1012,25 +982,4 @@ std::optional<ScanResult> JFJochStateMachine::GetScanResult() const {
         throw WrongDAQStateException("Cannot check scan result, when running");
 
     return scan_result;
-}
-
-DarkMaskSettings JFJochStateMachine::GetDarkMaskSettings() const {
-    std::unique_lock ul(experiment_dark_mask_settings_mutex);
-    return experiment.GetDarkMaskSettings();
-}
-
-void JFJochStateMachine::SetDarkMaskSettings(const DarkMaskSettings &settings) {
-    std::unique_lock ul(m);
-    if (IsRunning())
-        throw WrongDAQStateException("Cannot change dark mask calculation settings during data collection");
-    {
-        // Setting dark mask settings in experiment requires BOTH mutexes
-        std::unique_lock ul2(experiment_dark_mask_settings_mutex);
-        experiment.ImportDarkMaskSettings(settings);
-    }
-    if ((experiment.GetDetectorType() == DetectorType::DECTRIS) && (state == JFJochState::Idle)) {
-        // Need to redo the calibration
-        SetState(JFJochState::Busy, "Loading settings", BrokerStatus::MessageSeverity::Info);
-        measurement = std::async(std::launch::async, &JFJochStateMachine::PedestalThread, this, std::move(ul));
-    }
-}
+}

broker/JFJochStateMachine.h

@@ -16,7 +16,7 @@
 #include "JFJochServices.h"
 #include "../common/ROIMap.h"
 
-enum class JFJochState {Inactive, Idle, Measuring, Error, Busy, Calibration};
+enum class JFJochState {Inactive, Idle, Measuring, Error, Busy, Pedestal};
 
 struct BrokerStatus {
     JFJochState state = JFJochState::Inactive;
@@ -95,7 +95,6 @@ class JFJochStateMachine {
     mutable std::mutex experiment_image_format_settings_mutex;
     mutable std::mutex experiment_file_writer_settings_mutex;
     mutable std::mutex experiment_indexing_settings_mutex;
-    mutable std::mutex experiment_dark_mask_settings_mutex;
     DiffractionExperiment experiment;
 
     // mutex m is protecting:
@@ -141,14 +140,11 @@ class JFJochStateMachine {
     bool ImportPedestalG0(const JFJochReceiverOutput &receiver_output);
     bool IsRunning() const; // Is state Busy/Pedestal/Measure
     void ResetError() noexcept;
-    void TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul);
-    void CalibrateDetector(std::unique_lock<std::mutex> &ul);
-    void CalibrateJUNGFRAU(std::unique_lock<std::mutex> &ul);
+    void TakePedestalInternalAll(std::unique_lock<std::mutex> &ul);
     void TakePedestalInternalG0(std::unique_lock<std::mutex> &ul);
     void TakePedestalInternalG1(std::unique_lock<std::mutex> &ul, int32_t storage_cell = 0);
     void TakePedestalInternalG2(std::unique_lock<std::mutex> &ul, int32_t storage_cell = 0);
     bool ImportDetectorSettings(const DetectorSettings& input);
-
     void UpdateROIDefinition();
 public:
     JFJochStateMachine(const DiffractionExperiment& experiment,
@@ -246,9 +242,6 @@ public:
     void AddDetectorSetup(const DetectorSetup& setup); // Not thread safe, only during setup
 
     std::optional<ScanResult> GetScanResult() const;
-
-    void SetDarkMaskSettings(const DarkMaskSettings& settings);
-    DarkMaskSettings GetDarkMaskSettings() const;
 };
 
 

broker/OpenAPIConvert.cpp

@@ -215,7 +215,7 @@ org::openapitools::server::model::Broker_status Convert(const BrokerStatus& inpu
         case JFJochState::Busy:
             ret.setState("Busy");
             break;
-        case JFJochState::Calibration:
+        case JFJochState::Pedestal:
             ret.setState("Pedestal");
             break;
     }
@@ -741,8 +741,8 @@ org::openapitools::server::model::Zeromq_metadata_settings Convert(const ZMQMeta
 org::openapitools::server::model::Pixel_mask_statistics Convert(const PixelMaskStatistics& input) {
     org::openapitools::server::model::Pixel_mask_statistics ret;
     ret.setUserMask(input.user_mask);
-    ret.setWrongGain(input.error_pixel);
-    ret.setTooHighPedestalRms(input.noisy_pixel);
+    ret.setWrongGain(input.wrong_gain);
+    ret.setTooHighPedestalRms(input.too_high_pedestal_rms);
     return ret;
 }
 
@@ -1020,24 +1020,4 @@ org::openapitools::server::model::Scan_result Convert(const ScanResult& input) {
     }
     ret.setImages(v);
     return ret;
-}
-
-org::openapitools::server::model::Dark_mask_settings Convert(const DarkMaskSettings &input) {
-    org::openapitools::server::model::Dark_mask_settings ret{};
-    ret.setDetectorThresholdKeV(input.GetThreshold_keV());
-    ret.setFrameTimeUs(input.GetFrameTime().count());
-    ret.setMaxFramesWithSignal(input.GetMaxFramesWithCounts());
-    ret.setMaxAllowedPixelCount(input.GetMaxCounts());
-    ret.setNumberOfFrames(input.GetNumberOfFrames());
-    return ret;
-}
-
-DarkMaskSettings Convert(const org::openapitools::server::model::Dark_mask_settings &input) {
-    DarkMaskSettings ret{};
-    ret.FrameTime(std::chrono::microseconds(input.getFrameTimeUs()))
-            .NumberOfFrames(input.getNumberOfFrames())
-            .MaxCounts(input.getMaxAllowedPixelCount())
-            .MaxFramesWithCounts(input.getMaxFramesWithSignal())
-            .Threshold_keV(input.getDetectorThresholdKeV());
-    return ret;
-}
+}

broker/OpenAPIConvert.h

@@ -4,7 +4,6 @@
 #ifndef JFJOCH_OPENAPICONVERT_H
 #define JFJOCH_OPENAPICONVERT_H
 
-#include "Dark_mask_settings.h"
 #include "gen/model/Spot_finding_settings.h"
 #include "gen/model/Measurement_statistics.h"
 #include "gen/model/Detector_settings.h"
@@ -89,6 +88,4 @@ ColorScaleEnum ConvertColorScale(const std::optional<std::string>& input);
 
 org::openapitools::server::model::Scan_result Convert(const ScanResult& input);
 
-org::openapitools::server::model::Dark_mask_settings Convert(const DarkMaskSettings& input);
-DarkMaskSettings Convert(const org::openapitools::server::model::Dark_mask_settings& input);
 #endif //JFJOCH_OPENAPICONVERT_H

broker/gen/api/ApiBase.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/api/DefaultApi.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -36,8 +36,6 @@ void DefaultApi::setupRoutes() {
     Routes::Post(*router, base + "/cancel", Routes::bind(&DefaultApi::cancel_post_handler, this));
     Routes::Get(*router, base + "/config/azim_int", Routes::bind(&DefaultApi::config_azim_int_get_handler, this));
     Routes::Put(*router, base + "/config/azim_int", Routes::bind(&DefaultApi::config_azim_int_put_handler, this));
-    Routes::Get(*router, base + "/config/dark_mask", Routes::bind(&DefaultApi::config_dark_mask_get_handler, this));
-    Routes::Put(*router, base + "/config/dark_mask", Routes::bind(&DefaultApi::config_dark_mask_put_handler, this));
     Routes::Get(*router, base + "/config/detector", Routes::bind(&DefaultApi::config_detector_get_handler, this));
     Routes::Put(*router, base + "/config/detector", Routes::bind(&DefaultApi::config_detector_put_handler, this));
     Routes::Get(*router, base + "/config/file_writer", Routes::bind(&DefaultApi::config_file_writer_get_handler, this));
@@ -195,56 +193,6 @@ void DefaultApi::config_azim_int_put_handler(const Pistache::Rest::Request &requ
         response.send(Pistache::Http::Code::Internal_Server_Error, e.what());
     }
 
-}
-void DefaultApi::config_dark_mask_get_handler(const Pistache::Rest::Request &, Pistache::Http::ResponseWriter response) {
-    try {
-
-
-    try {
-        this->config_dark_mask_get(response);
-    } catch (Pistache::Http::HttpError &e) {
-        response.send(static_cast<Pistache::Http::Code>(e.code()), e.what());
-        return;
-    } catch (std::exception &e) {
-        this->handleOperationException(e, response);
-        return;
-    }
-
-    } catch (std::exception &e) {
-        response.send(Pistache::Http::Code::Internal_Server_Error, e.what());
-    }
-
-}
-void DefaultApi::config_dark_mask_put_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response) {
-    try {
-
-
-    // Getting the body param
-    
-    Dark_mask_settings darkMaskSettings;
-    
-    try {
-        nlohmann::json::parse(request.body()).get_to(darkMaskSettings);
-        darkMaskSettings.validate();
-    } catch (std::exception &e) {
-        this->handleParsingException(e, response);
-        return;
-    }
-
-    try {
-        this->config_dark_mask_put(darkMaskSettings, response);
-    } catch (Pistache::Http::HttpError &e) {
-        response.send(static_cast<Pistache::Http::Code>(e.code()), e.what());
-        return;
-    } catch (std::exception &e) {
-        this->handleOperationException(e, response);
-        return;
-    }
-
-    } catch (std::exception &e) {
-        response.send(Pistache::Http::Code::Internal_Server_Error, e.what());
-    }
-
 }
 void DefaultApi::config_detector_get_handler(const Pistache::Rest::Request &, Pistache::Http::ResponseWriter response) {
     try {

broker/gen/api/DefaultApi.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -31,7 +31,6 @@
 #include "Azim_int_settings.h"
 #include "Broker_status.h"
 #include "Calibration_statistics_inner.h"
-#include "Dark_mask_settings.h"
 #include "Dataset_settings.h"
 #include "Detector_list.h"
 #include "Detector_selection.h"
@@ -72,8 +71,6 @@ private:
     void cancel_post_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
     void config_azim_int_get_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
     void config_azim_int_put_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
-    void config_dark_mask_get_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
-    void config_dark_mask_put_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
     void config_detector_get_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
     void config_detector_put_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
     void config_file_writer_get_handler(const Pistache::Rest::Request &request, Pistache::Http::ResponseWriter response);
@@ -181,21 +178,6 @@ private:
     /// <param name="azimIntSettings"> (optional)</param>
     virtual void config_azim_int_put(const org::openapitools::server::model::Azim_int_settings &azimIntSettings, Pistache::Http::ResponseWriter &response) = 0;
     /// <summary>
-    /// Get settings for dark data collection to calculate mask
-    /// </summary>
-    /// <remarks>
-    /// 
-    /// </remarks>
-    virtual void config_dark_mask_get(Pistache::Http::ResponseWriter &response) = 0;
-    /// <summary>
-    /// Set configuration for dark data collection to calculate mask
-    /// </summary>
-    /// <remarks>
-    /// This is only possible when operating DECTRIS detectors at the moment; it will be also available for PSI EIGER at some point. This can only be done when detector is &#x60;Idle&#x60;, &#x60;Error&#x60; or &#x60;Inactive&#x60; states. 
-    /// </remarks>
-    /// <param name="darkMaskSettings"> (optional)</param>
-    virtual void config_dark_mask_put(const org::openapitools::server::model::Dark_mask_settings &darkMaskSettings, Pistache::Http::ResponseWriter &response) = 0;
-    /// <summary>
     /// Get detector configuration
     /// </summary>
     /// <remarks>

broker/gen/model/Azim_int_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Azim_int_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dark_mask_settings.cpp

@@ -1,227 +0,0 @@
-/**
-* Jungfraujoch
-* API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
-*
-* The version of the OpenAPI document: 1.0.0-rc.97
-* Contact: filip.leonarski@psi.ch
-*
-* NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
-* https://openapi-generator.tech
-* Do not edit the class manually.
-*/
-
-
-#include "Dark_mask_settings.h"
-#include "Helpers.h"
-
-#include <sstream>
-
-namespace org::openapitools::server::model
-{
-
-Dark_mask_settings::Dark_mask_settings()
-{
-    m_Detector_threshold_keV = 3.5f;
-    m_Frame_time_us = 10000L;
-    m_Number_of_frames = 1000L;
-    m_Max_allowed_pixel_count = 1L;
-    m_Max_frames_with_signal = 10L;
-    
-}
-
-void Dark_mask_settings::validate() const
-{
-    std::stringstream msg;
-    if (!validate(msg))
-    {
-        throw org::openapitools::server::helpers::ValidationException(msg.str());
-    }
-}
-
-bool Dark_mask_settings::validate(std::stringstream& msg) const
-{
-    return validate(msg, "");
-}
-
-bool Dark_mask_settings::validate(std::stringstream& msg, const std::string& pathPrefix) const
-{
-    bool success = true;
-    const std::string _pathPrefix = pathPrefix.empty() ? "Dark_mask_settings" : pathPrefix;
-
-         
-    
-    /* Detector_threshold_keV */ {
-        const float& value = m_Detector_threshold_keV;
-        const std::string currentValuePath = _pathPrefix + ".detectorThresholdKeV";
-                
-        
-        if (value < static_cast<float>(2.5))
-        {
-            success = false;
-            msg << currentValuePath << ": must be greater than or equal to 2.5;";
-        }
-        if (value > static_cast<float>(100.0))
-        {
-            success = false;
-            msg << currentValuePath << ": must be less than or equal to 100.0;";
-        }
-
-    }
-         
-    
-    /* Frame_time_us */ {
-        const int64_t& value = m_Frame_time_us;
-        const std::string currentValuePath = _pathPrefix + ".frameTimeUs";
-                
-        
-        if (value < 500ll)
-        {
-            success = false;
-            msg << currentValuePath << ": must be greater than or equal to 500;";
-        }
-        if (value > 100000ll)
-        {
-            success = false;
-            msg << currentValuePath << ": must be less than or equal to 100000;";
-        }
-
-    }
-         
-    
-    /* Number_of_frames */ {
-        const int64_t& value = m_Number_of_frames;
-        const std::string currentValuePath = _pathPrefix + ".numberOfFrames";
-                
-        
-        if (value < 0ll)
-        {
-            success = false;
-            msg << currentValuePath << ": must be greater than or equal to 0;";
-        }
-
-    }
-         
-    
-    /* Max_allowed_pixel_count */ {
-        const int64_t& value = m_Max_allowed_pixel_count;
-        const std::string currentValuePath = _pathPrefix + ".maxAllowedPixelCount";
-                
-        
-        if (value < 0ll)
-        {
-            success = false;
-            msg << currentValuePath << ": must be greater than or equal to 0;";
-        }
-
-    }
-         
-    
-    /* Max_frames_with_signal */ {
-        const int64_t& value = m_Max_frames_with_signal;
-        const std::string currentValuePath = _pathPrefix + ".maxFramesWithSignal";
-                
-        
-        if (value < 0ll)
-        {
-            success = false;
-            msg << currentValuePath << ": must be greater than or equal to 0;";
-        }
-
-    }
-    
-    return success;
-}
-
-bool Dark_mask_settings::operator==(const Dark_mask_settings& rhs) const
-{
-    return
-    
-    
-    (getDetectorThresholdKeV() == rhs.getDetectorThresholdKeV())
-     &&
-    
-    (getFrameTimeUs() == rhs.getFrameTimeUs())
-     &&
-    
-    (getNumberOfFrames() == rhs.getNumberOfFrames())
-     &&
-    
-    (getMaxAllowedPixelCount() == rhs.getMaxAllowedPixelCount())
-     &&
-    
-    (getMaxFramesWithSignal() == rhs.getMaxFramesWithSignal())
-    
-    
-    ;
-}
-
-bool Dark_mask_settings::operator!=(const Dark_mask_settings& rhs) const
-{
-    return !(*this == rhs);
-}
-
-void to_json(nlohmann::json& j, const Dark_mask_settings& o)
-{
-    j = nlohmann::json::object();
-    j["detector_threshold_keV"] = o.m_Detector_threshold_keV;
-    j["frame_time_us"] = o.m_Frame_time_us;
-    j["number_of_frames"] = o.m_Number_of_frames;
-    j["max_allowed_pixel_count"] = o.m_Max_allowed_pixel_count;
-    j["max_frames_with_signal"] = o.m_Max_frames_with_signal;
-    
-}
-
-void from_json(const nlohmann::json& j, Dark_mask_settings& o)
-{
-    j.at("detector_threshold_keV").get_to(o.m_Detector_threshold_keV);
-    j.at("frame_time_us").get_to(o.m_Frame_time_us);
-    j.at("number_of_frames").get_to(o.m_Number_of_frames);
-    j.at("max_allowed_pixel_count").get_to(o.m_Max_allowed_pixel_count);
-    j.at("max_frames_with_signal").get_to(o.m_Max_frames_with_signal);
-    
-}
-
-float Dark_mask_settings::getDetectorThresholdKeV() const
-{
-    return m_Detector_threshold_keV;
-}
-void Dark_mask_settings::setDetectorThresholdKeV(float const value)
-{
-    m_Detector_threshold_keV = value;
-}
-int64_t Dark_mask_settings::getFrameTimeUs() const
-{
-    return m_Frame_time_us;
-}
-void Dark_mask_settings::setFrameTimeUs(int64_t const value)
-{
-    m_Frame_time_us = value;
-}
-int64_t Dark_mask_settings::getNumberOfFrames() const
-{
-    return m_Number_of_frames;
-}
-void Dark_mask_settings::setNumberOfFrames(int64_t const value)
-{
-    m_Number_of_frames = value;
-}
-int64_t Dark_mask_settings::getMaxAllowedPixelCount() const
-{
-    return m_Max_allowed_pixel_count;
-}
-void Dark_mask_settings::setMaxAllowedPixelCount(int64_t const value)
-{
-    m_Max_allowed_pixel_count = value;
-}
-int64_t Dark_mask_settings::getMaxFramesWithSignal() const
-{
-    return m_Max_frames_with_signal;
-}
-void Dark_mask_settings::setMaxFramesWithSignal(int64_t const value)
-{
-    m_Max_frames_with_signal = value;
-}
-
-
-} // namespace org::openapitools::server::model
-

broker/gen/model/Dark_mask_settings.h

@@ -1,104 +0,0 @@
-/**
-* Jungfraujoch
-* API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
-*
-* The version of the OpenAPI document: 1.0.0-rc.97
-* Contact: filip.leonarski@psi.ch
-*
-* NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
-* https://openapi-generator.tech
-* Do not edit the class manually.
-*/
-/*
- * Dark_mask_settings.h
- *
- * Settings for collection of dark images to be used for mask calculation
- */
-
-#ifndef Dark_mask_settings_H_
-#define Dark_mask_settings_H_
-
-
-#include <nlohmann/json.hpp>
-
-namespace org::openapitools::server::model
-{
-
-/// <summary>
-/// Settings for collection of dark images to be used for mask calculation
-/// </summary>
-class  Dark_mask_settings
-{
-public:
-    Dark_mask_settings();
-    virtual ~Dark_mask_settings() = default;
-
-
-    /// <summary>
-    /// Validate the current data in the model. Throws a ValidationException on failure.
-    /// </summary>
-    void validate() const;
-
-    /// <summary>
-    /// Validate the current data in the model. Returns false on error and writes an error
-    /// message into the given stringstream.
-    /// </summary>
-    bool validate(std::stringstream& msg) const;
-
-    /// <summary>
-    /// Helper overload for validate. Used when one model stores another model and calls it's validate.
-    /// Not meant to be called outside that case.
-    /// </summary>
-    bool validate(std::stringstream& msg, const std::string& pathPrefix) const;
-
-    bool operator==(const Dark_mask_settings& rhs) const;
-    bool operator!=(const Dark_mask_settings& rhs) const;
-
-    /////////////////////////////////////////////
-    /// Dark_mask_settings members
-
-    /// <summary>
-    /// Energy threshold for dark image collection
-    /// </summary>
-    float getDetectorThresholdKeV() const;
-    void setDetectorThresholdKeV(float const value);
-    /// <summary>
-    /// Time between frames for dark image collection
-    /// </summary>
-    int64_t getFrameTimeUs() const;
-    void setFrameTimeUs(int64_t const value);
-    /// <summary>
-    /// Number of frames for dark image collection; zero means no dark collection
-    /// </summary>
-    int64_t getNumberOfFrames() const;
-    void setNumberOfFrames(int64_t const value);
-    /// <summary>
-    /// Maximum count in a pixel considered normal (not-masked)
-    /// </summary>
-    int64_t getMaxAllowedPixelCount() const;
-    void setMaxAllowedPixelCount(int64_t const value);
-    /// <summary>
-    /// Maximum number of frames with signal in a pixel considered normal (not-masked)
-    /// </summary>
-    int64_t getMaxFramesWithSignal() const;
-    void setMaxFramesWithSignal(int64_t const value);
-
-    friend  void to_json(nlohmann::json& j, const Dark_mask_settings& o);
-    friend  void from_json(const nlohmann::json& j, Dark_mask_settings& o);
-protected:
-    float m_Detector_threshold_keV;
-
-    int64_t m_Frame_time_us;
-
-    int64_t m_Number_of_frames;
-
-    int64_t m_Max_allowed_pixel_count;
-
-    int64_t m_Max_frames_with_signal;
-
-    
-};
-
-} // namespace org::openapitools::server::model
-
-#endif /* Dark_mask_settings_H_ */

broker/gen/model/Dataset_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list_element.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list_element.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Instrument_metadata.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Instrument_metadata.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -41,7 +41,6 @@ Jfjoch_settings::Jfjoch_settings()
     m_SslIsSet = false;
     m_Zeromq_previewIsSet = false;
     m_Zeromq_metadataIsSet = false;
-    m_Dark_maskIsSet = false;
     
 }
 
@@ -139,7 +138,7 @@ bool Jfjoch_settings::validate(std::stringstream& msg, const std::string& pathPr
         }
 
     }
-                                
+                            
     return success;
 }
 
@@ -200,10 +199,7 @@ bool Jfjoch_settings::operator==(const Jfjoch_settings& rhs) const
     ((!zeromqPreviewIsSet() && !rhs.zeromqPreviewIsSet()) || (zeromqPreviewIsSet() && rhs.zeromqPreviewIsSet() && getZeromqPreview() == rhs.getZeromqPreview())) &&
     
     
-    ((!zeromqMetadataIsSet() && !rhs.zeromqMetadataIsSet()) || (zeromqMetadataIsSet() && rhs.zeromqMetadataIsSet() && getZeromqMetadata() == rhs.getZeromqMetadata())) &&
-    
-    
-    ((!darkMaskIsSet() && !rhs.darkMaskIsSet()) || (darkMaskIsSet() && rhs.darkMaskIsSet() && getDarkMask() == rhs.getDarkMask()))
+    ((!zeromqMetadataIsSet() && !rhs.zeromqMetadataIsSet()) || (zeromqMetadataIsSet() && rhs.zeromqMetadataIsSet() && getZeromqMetadata() == rhs.getZeromqMetadata()))
     
     ;
 }
@@ -249,8 +245,6 @@ void to_json(nlohmann::json& j, const Jfjoch_settings& o)
         j["zeromq_preview"] = o.m_Zeromq_preview;
     if(o.zeromqMetadataIsSet())
         j["zeromq_metadata"] = o.m_Zeromq_metadata;
-    if(o.darkMaskIsSet())
-        j["dark_mask"] = o.m_Dark_mask;
     
 }
 
@@ -334,11 +328,6 @@ void from_json(const nlohmann::json& j, Jfjoch_settings& o)
         j.at("zeromq_metadata").get_to(o.m_Zeromq_metadata);
         o.m_Zeromq_metadataIsSet = true;
     } 
-    if(j.find("dark_mask") != j.end())
-    {
-        j.at("dark_mask").get_to(o.m_Dark_mask);
-        o.m_Dark_maskIsSet = true;
-    } 
     
 }
 
@@ -621,23 +610,6 @@ void Jfjoch_settings::unsetZeromq_metadata()
 {
     m_Zeromq_metadataIsSet = false;
 }
-org::openapitools::server::model::Dark_mask_settings Jfjoch_settings::getDarkMask() const
-{
-    return m_Dark_mask;
-}
-void Jfjoch_settings::setDarkMask(org::openapitools::server::model::Dark_mask_settings const& value)
-{
-    m_Dark_mask = value;
-    m_Dark_maskIsSet = true;
-}
-bool Jfjoch_settings::darkMaskIsSet() const
-{
-    return m_Dark_maskIsSet;
-}
-void Jfjoch_settings::unsetDark_mask()
-{
-    m_Dark_maskIsSet = false;
-}
 
 
 } // namespace org::openapitools::server::model

broker/gen/model/Jfjoch_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -20,7 +20,6 @@
 
 
 #include "Zeromq_preview_settings.h"
-#include "Dark_mask_settings.h"
 #include "Pcie_devices_inner.h"
 #include <string>
 #include "File_writer_settings.h"
@@ -193,13 +192,6 @@ public:
     void setZeromqMetadata(org::openapitools::server::model::Zeromq_metadata_settings const& value);
     bool zeromqMetadataIsSet() const;
     void unsetZeromq_metadata();
-    /// <summary>
-    /// 
-    /// </summary>
-    org::openapitools::server::model::Dark_mask_settings getDarkMask() const;
-    void setDarkMask(org::openapitools::server::model::Dark_mask_settings const& value);
-    bool darkMaskIsSet() const;
-    void unsetDark_mask();
 
     friend  void to_json(nlohmann::json& j, const Jfjoch_settings& o);
     friend  void from_json(const nlohmann::json& j, Jfjoch_settings& o);
@@ -240,8 +232,6 @@ protected:
     bool m_Zeromq_previewIsSet;
     org::openapitools::server::model::Zeromq_metadata_settings m_Zeromq_metadata;
     bool m_Zeromq_metadataIsSet;
-    org::openapitools::server::model::Dark_mask_settings m_Dark_mask;
-    bool m_Dark_maskIsSet;
     
 };
 

broker/gen/model/Jfjoch_settings_ssl.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings_ssl.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -34,7 +34,6 @@ Jfjoch_statistics::Jfjoch_statistics()
     m_CalibrationIsSet = false;
     m_Zeromq_previewIsSet = false;
     m_Zeromq_metadataIsSet = false;
-    m_Dark_maskIsSet = false;
     m_Pixel_maskIsSet = false;
     m_RoiIsSet = false;
     m_Az_intIsSet = false;
@@ -104,7 +103,7 @@ bool Jfjoch_statistics::validate(std::stringstream& msg, const std::string& path
         }
 
     }
-                                    
+                                
     return success;
 }
 
@@ -153,9 +152,6 @@ bool Jfjoch_statistics::operator==(const Jfjoch_statistics& rhs) const
     ((!zeromqMetadataIsSet() && !rhs.zeromqMetadataIsSet()) || (zeromqMetadataIsSet() && rhs.zeromqMetadataIsSet() && getZeromqMetadata() == rhs.getZeromqMetadata())) &&
     
     
-    ((!darkMaskIsSet() && !rhs.darkMaskIsSet()) || (darkMaskIsSet() && rhs.darkMaskIsSet() && getDarkMask() == rhs.getDarkMask())) &&
-    
-    
     ((!pixelMaskIsSet() && !rhs.pixelMaskIsSet()) || (pixelMaskIsSet() && rhs.pixelMaskIsSet() && getPixelMask() == rhs.getPixelMask())) &&
     
     
@@ -207,8 +203,6 @@ void to_json(nlohmann::json& j, const Jfjoch_statistics& o)
         j["zeromq_preview"] = o.m_Zeromq_preview;
     if(o.zeromqMetadataIsSet())
         j["zeromq_metadata"] = o.m_Zeromq_metadata;
-    if(o.darkMaskIsSet())
-        j["dark_mask"] = o.m_Dark_mask;
     if(o.pixelMaskIsSet())
         j["pixel_mask"] = o.m_Pixel_mask;
     if(o.roiIsSet())
@@ -289,11 +283,6 @@ void from_json(const nlohmann::json& j, Jfjoch_statistics& o)
         j.at("zeromq_metadata").get_to(o.m_Zeromq_metadata);
         o.m_Zeromq_metadataIsSet = true;
     } 
-    if(j.find("dark_mask") != j.end())
-    {
-        j.at("dark_mask").get_to(o.m_Dark_mask);
-        o.m_Dark_maskIsSet = true;
-    } 
     if(j.find("pixel_mask") != j.end())
     {
         j.at("pixel_mask").get_to(o.m_Pixel_mask);
@@ -543,23 +532,6 @@ void Jfjoch_statistics::unsetZeromq_metadata()
 {
     m_Zeromq_metadataIsSet = false;
 }
-org::openapitools::server::model::Dark_mask_settings Jfjoch_statistics::getDarkMask() const
-{
-    return m_Dark_mask;
-}
-void Jfjoch_statistics::setDarkMask(org::openapitools::server::model::Dark_mask_settings const& value)
-{
-    m_Dark_mask = value;
-    m_Dark_maskIsSet = true;
-}
-bool Jfjoch_statistics::darkMaskIsSet() const
-{
-    return m_Dark_maskIsSet;
-}
-void Jfjoch_statistics::unsetDark_mask()
-{
-    m_Dark_maskIsSet = false;
-}
 org::openapitools::server::model::Pixel_mask_statistics Jfjoch_statistics::getPixelMask() const
 {
     return m_Pixel_mask;

broker/gen/model/Jfjoch_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -26,7 +26,6 @@
 #include "Spot_finding_settings.h"
 #include "Zeromq_preview_settings.h"
 #include "Detector_list.h"
-#include "Dark_mask_settings.h"
 #include "File_writer_settings.h"
 #include "Azim_int_settings.h"
 #include "Image_format_settings.h"
@@ -171,13 +170,6 @@ public:
     /// <summary>
     /// 
     /// </summary>
-    org::openapitools::server::model::Dark_mask_settings getDarkMask() const;
-    void setDarkMask(org::openapitools::server::model::Dark_mask_settings const& value);
-    bool darkMaskIsSet() const;
-    void unsetDark_mask();
-    /// <summary>
-    /// 
-    /// </summary>
     org::openapitools::server::model::Pixel_mask_statistics getPixelMask() const;
     void setPixelMask(org::openapitools::server::model::Pixel_mask_statistics const& value);
     bool pixelMaskIsSet() const;
@@ -240,8 +232,6 @@ protected:
     bool m_Zeromq_previewIsSet;
     org::openapitools::server::model::Zeromq_metadata_settings m_Zeromq_metadata;
     bool m_Zeromq_metadataIsSet;
-    org::openapitools::server::model::Dark_mask_settings m_Dark_mask;
-    bool m_Dark_maskIsSet;
     org::openapitools::server::model::Pixel_mask_statistics m_Pixel_mask;
     bool m_Pixel_maskIsSet;
     org::openapitools::server::model::Roi_definitions m_Roi;

broker/gen/model/Measurement_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Measurement_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.97
+* The version of the OpenAPI document: 1.0.0-rc.96
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).