5 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	0e23fd3ab9	Bragg integration: propagate the background-estimate uncertainty, add an opt-in radial background correction ... Two independent pieces in the same code path. The background-estimate variance was never propagated. A reflection's background comes from a finite ring of n_b pixels, so subtracting it adds var(B)/n_b per signal pixel - sqrt(1 + n_d/n_b) = 1.109 with the shipped stencil. Both engines omitted it, which is exactly the 1.11-1.19 gap measured between the off-ring scatter and the reported sigma. Three lines each; it affects every dataset, not only iced ones. The radial correction is new and OFF by default (--background-radial). The signal disk and the background ring are concentric, so for any background LINEAR in position <B>_ann == <B>_disk identically and a plane fit buys nothing; the leading error is the CURVATURE of the radial background, which on a sharp ice ring reaches +26 counts on a single reflection. Since every reflection uses the same stencil, that error is a fixed kernel over radial offset - one short dot product per reflection and no extra pixel reads. Validated on empty apertures before any C++: mean |bias| over 9 bands / 3 crystals 4.33 -> 0.79 counts with the scatter unchanged. Three things it cost a battery each to learn, all now in the code: - the radial curve must be accumulated from CLIPPED annulus pixels, inside the clip pass, or it carries neighbour tails and zingers (so it is inert under --integrator boxsum, which has no clip pass); - the GPU version was a 1.8x slowdown from atomicAdd contention on a small radial array - staged in shared memory per block it now costs nothing measurable; - it is battery-NEUTRAL as a default, because the reflections whose bias it fixes are the ones the ice handling already excludes. Hence off by default. CPU/GPU parity extended with two radial sections: 9002 assertions. Also fixes a latent French-Wilson quadrature collapse: j_max = I + 8 sigma on a fixed 400-point grid degenerates to a single cell once sigma >> 50 <I>, giving F = 0.1 sqrt(sigma) with sigmaF -> 0. Harmless today, but any sigma-inflation scheme detonates it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-06 15:44:13 +02:00
leonarski_fandClaude Opus 5	09fb8e0306	Bragg integration: clip the background ring high side instead of trimming it ... The r2..r3 background ring was averaged with a 10% SYMMETRIC trimmed mean. A symmetric trim is not a consistent estimator of the mean of a right-skewed (Poisson) sample: on a clean Poisson ring it sits ~0.1 ct/px BELOW the true mean at every level, and with ~50 signal pixels in the r1 disk that under-subtraction adds ~5 counts to every partial on every frame. Measured two independent ways on four rotation datasets - stored background_mean against a plain ring mean over the same pixels on reflection-free frames, and directly on apertures that provably hold no reflection. Empty-aperture pedestal, counts: plain mean -0.03..-0.20, 10% symmetric trim +5.05..+6.34, 4 sigma clip +0.02..+0.54. Replace it with a high-side-only sigma clip at mean + n*sqrt(mean), n = 4 for monochromatic data. It rejects the same one-sided contamination the trim was there for - better, in fact: a 40 px neighbour core at +100 ct shifts the trim by +10.1 ct/px, because a symmetric trim collapses once contamination exceeds ~10% of the ring, versus +0.009 ct/px at 4 sigma. False rejection on a clean ring is 0.04-0.39%. Broadband data keep their tuned 3 sigma clip unchanged. The trim stays reachable with --background-trim for back compatibility; setting either estimator clears the other, so they can never stack. --integrator boxsum does not take the clip (matching what the shipped clip already did), so it now uses the plain ring mean unless --background-trim is given. The intensities get measurably more accurate: per-shell agreement with an independent processing of the same images improves on 14 of 16 crystals (weighted -0.0347, outermost shell 12/4), the outermost-shell R_meas NUMERATOR - absolute scatter, not a denominator effect - falls 13.5% median on 16/5, and CC1/2 in the outer shell improves on 14/7. EXPECT <I/sigma> TO FALL AND EDGE R_meas TO RISE. Both are inflated by information-free counts, so both get worse when the bias is removed; neither is evidence against this change. That fingerprint is exactly how the trimmed mean was accepted in the first place. Known cost: over the 37-crystal rotation battery the de-novo space-group count goes 34 OK / 3 DIFF to 33 / 4. The single regression is a two-lattice crystal whose merge fails the absolute-sanity gate under either background (R_meas 63.5%, CC1/2 72.2%) and which carries an unresolved indexing ambiguity on the very operator being scored, so its operator CC is diluted by construction. No other crystal changes space group, and twin protection is not weakened - the H-ratio veto that refuses genuinely twinned crystals gets MORE decisive (1.63 -> 1.84, 2.83 -> 3.99). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-05 18:03:11 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00