5 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	d00175c8b4	resolution: a cut the shell table refutes is not quoted ... One run was written to 1.089 A where I/sigma was zero and R_meas 1776 per cent, and the summary said only "Merged to 1.09 A". Two things let that through. The logistic's crossing was taken wherever the fitted curve met the target, even when that point lay past every bin the curve was fitted through - an extrapolation of a fall-off the data never showed, quoted as a measurement. The crossing now has to lie inside the fitted bins, with the one-shell extension still there to spare; outside them the number is read off the bins themselves instead. And the shipped guard asked only for the finest shell whose CC1/2 still reached the target, with no requirement that the curve get there monotonically. A noise shell that climbs back over the bar therefore became the edge of the data. It is the climbing back that disqualifies it, and the program already noticed - it printed "CC1/2 is not monotone with resolution" and then cut there anyway, because the test was developer-only and decided nothing. It decides now, in the report everyone reads, and the duplicate is gone so there is one such test rather than two. The dataset above is written to 1.527 A: CC1/2 0.209 to 0.688, I/sigma 0.40 to 1.26, R_meas 245 to 145 per cent. Forty-four of fifty-one reports are unchanged to the character; of the seven that move, five are cut coarser and every headline number of all five improves, one loses a fit that was an extrapolation without changing anything written, and one gains a quotable fit and loses a warning. This is a guard, not the cause. On four of those five the reflections doing the damage are ice, which the resolution fit now leaves out for its own reasons; the guard still earns its place, because on those four removing the ice alone does not stop the cut being quoted past what the shells support. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011GxZqDiFP3KqriBhNdcR56	2026-09-14 14:17:39 +02:00
leonarski_fandClaude Opus 5	5f1292ca3b	resolution: the cut is decided on the crystal's own diffraction, not on the ice ... A powder ring is reproducible. Past the crystal's own limit the ice is still there and still the same in both half-sets, so the two halves agree about the ice, and a Pearson correlation cannot tell that agreement from diffraction. Shells have been measured at CC1/2 0.765 where <I/sigma> is -0.1 and R_meas is 470 per cent, and at 0.828 where R_meas is 560 - inside the written range, because the logistic was fitted through them. Against archived references a run whose frames carry ice is written a mean twelve per cent finer than the reference and one without four, and every over-claim past twenty per cent has rings. The same ring drags the curve the other way where the data are good: one shell of forty falls to CC1/2 0.51 because the two strongest ice lines cross it, and the shell either side reads 0.99. That is a real defect of those reflections, but it is narrower than the shell it is reported in, so it defames three quarters of a shell that is fine. Both signs are the same cause, and both leave the fit here. Scaling, the error model and the space-group search already keep ice out of their own fits - what changes is only that the resolution DECISION now reads the curve those three read. The reflections are still merged, still written, still counted in the shell table: the ring contaminates an intensity, it does not make it absent. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011GxZqDiFP3KqriBhNdcR56	2026-09-14 13:03:06 +02:00
leonarski_f	680c36c20d	v1.0.0-rc.166 (#76) ... * `rugnux --mode calibration` writes `<prefix>.json` beside the `.poni`, whose `dataset_settings` member is a `jfjoch_broker` `dataset_settings` body as it stands. * `rugnux` and `jfjoch_viewer` read PILATUS miniCBF sweeps natively, without conversion. * Masters written by other facilities open, including Eiger 1.x and third-party NXmx variants. * `rugnux` measures the beam centre on every run, and indexes with it when the file's value indexes nothing. * A detector swung out on a 2theta arm is placed where the file says it stands, and the calibration can hold the tilt fixed. * `rugnux` writes the unmerged MTZ by default, and a P1 merge beside it, so a wrong space group can be re-merged without reprocessing. * Significant improvements to symmetry handling in `rugnux`: the lattice, the point group, the setting and the systematic absences. * The `rugnux` report gives the resolution the CC1/2 fit reached, beside the range the reflections were written to. * The `rugnux` report gives the twinning statistics measured before the space group was decided, beside the ones measured after. * The `rugnux` report gives the strong-direction diffraction limit, and warns when CC1/2 is not monotone with resolution. * `rugnux` ranks screw axes on the evidence their absences carry, rather than on how many control reflections a candidate happens to have. * Twinning is no longer reported when the L-test contradicts it. * The `rugnux` report gives the detector tilt, the measured tilt and the direct beam beside the beam centre, and a post-refined beam centre is judged against the run's own measurement rather than the file's. * `--no-refine-tilt` holds the detector tilt at the value in the file, instead of zeroing it, when the calibration starts from the spots. * The `jfjoch_viewer` grid scan view draws the cells in the proportion of the scan steps, so the map has the shape of the scanned area. Reviewed-on: #76 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-02 21:17:31 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00