12 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	09fb8e0306	Bragg integration: clip the background ring high side instead of trimming it ... The r2..r3 background ring was averaged with a 10% SYMMETRIC trimmed mean. A symmetric trim is not a consistent estimator of the mean of a right-skewed (Poisson) sample: on a clean Poisson ring it sits ~0.1 ct/px BELOW the true mean at every level, and with ~50 signal pixels in the r1 disk that under-subtraction adds ~5 counts to every partial on every frame. Measured two independent ways on four rotation datasets - stored background_mean against a plain ring mean over the same pixels on reflection-free frames, and directly on apertures that provably hold no reflection. Empty-aperture pedestal, counts: plain mean -0.03..-0.20, 10% symmetric trim +5.05..+6.34, 4 sigma clip +0.02..+0.54. Replace it with a high-side-only sigma clip at mean + n*sqrt(mean), n = 4 for monochromatic data. It rejects the same one-sided contamination the trim was there for - better, in fact: a 40 px neighbour core at +100 ct shifts the trim by +10.1 ct/px, because a symmetric trim collapses once contamination exceeds ~10% of the ring, versus +0.009 ct/px at 4 sigma. False rejection on a clean ring is 0.04-0.39%. Broadband data keep their tuned 3 sigma clip unchanged. The trim stays reachable with --background-trim for back compatibility; setting either estimator clears the other, so they can never stack. --integrator boxsum does not take the clip (matching what the shipped clip already did), so it now uses the plain ring mean unless --background-trim is given. The intensities get measurably more accurate: per-shell agreement with an independent processing of the same images improves on 14 of 16 crystals (weighted -0.0347, outermost shell 12/4), the outermost-shell R_meas NUMERATOR - absolute scatter, not a denominator effect - falls 13.5% median on 16/5, and CC1/2 in the outer shell improves on 14/7. EXPECT <I/sigma> TO FALL AND EDGE R_meas TO RISE. Both are inflated by information-free counts, so both get worse when the bias is removed; neither is evidence against this change. That fingerprint is exactly how the trimmed mean was accepted in the first place. Known cost: over the 37-crystal rotation battery the de-novo space-group count goes 34 OK / 3 DIFF to 33 / 4. The single regression is a two-lattice crystal whose merge fails the absolute-sanity gate under either background (R_meas 63.5%, CC1/2 72.2%) and which carries an unresolved indexing ambiguity on the very operator being scored, so its operator CC is diluted by construction. No other crystal changes space group, and twin protection is not weakened - the H-ratio veto that refuses genuinely twinned crystals gets MORE decisive (1.63 -> 1.84, 2.83 -> 3.99). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-05 18:03:11 +02:00
leonarski_fandClaude Opus 5	e8a7696ffe	Viewer: process a dataset with the same defaults the CLI uses ... "Analyze dataset" and `rugnux` with no options are two front ends onto the same library and are meant to agree, but they decided their defaults separately and the two lists had drifted. The viewer was missing: - the de-novo starting point. The CLI discards the cell and space group stored in the input file before it does anything; the viewer left them on the experiment. Rugnux only searches for a space group when none is set, so the search was skipped entirely and the stored group was reported straight back. That is self-reinforcing: a finished job's own _process.h5 becomes the active snapshot, so a run that ended in P1 pinned every later run to P1 - which is what "lysozyme keeps coming out P1 in the viewer" was. - the polarization factor, so the Lp correction was omitted altogether. The missing factor is azimuthal and intensity-proportional, and symmetry mates sit at the same 2-theta but different azimuth - the exact "unequal intensities forced together" signature the space-group search vetoes as pseudo-symmetry, which can land a genuinely de-novo run in P1 on its own. - five rotation scaling defaults: the smooth-G range, the minimum captured fraction, the capture-aware sigma, outlier rejection and --search-min-zeta. The CLI's own comments tie the captured-fraction default to a crystal recovering its true space group instead of P1. Put the policy in one place (RugnuxDefaults) and have both front ends start from it. The CLI now takes its defaults from there and applies user options on top; its output is unchanged, verified bit-for-bit on four battery crystals. The stored cell/group is still available: the job dialog offers "Use the stored unit cell / space group", off by default, shown only when the file has one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-30 18:07:14 +02:00
leonarski_fandClaude Opus 5	16bf3408f0	Address code-review findings; make detection limits detector-driven ... One changeset, developed together in response to a review of this branch, so the files carry several of the changes at once. Full test suite passes (733 cases). Spot finding - Split ImageSpotFinder into Detect() (flag strong pixels - the expensive per-pixel pass) and ExtractSpots() (CCL + min/max-pix + resolution mask), with Run() = both. The per-image min-pix escalation now detects ONCE and repeats only the cheap extraction, instead of re-running the whole finder four times per frame as it did on the default path. It also keeps the winning attempt's spot list rather than re-extracting it, so the frame that is integrated is exactly the frame that was scored - which a GPU re-extract could not guarantee (float atomic ordering). - spot_finding_time_s no longer swallows indexing time, and indexing_time_s now sums every escalation call instead of reporting only the last. Detection limits follow the detector - The azimuthal-integration upper q and the spot-finding high-resolution limit are now std::optional, in the C++ structs AND in the OpenAPI schema, and resolve to the detector's own maximum (DiffractionExperiment::GetDetectorMaxQ_ recipA). Adaptive detection reads a pixel's ring from the azimuthal bins, so a pixel outside that q range could never be strong - the integration range silently bounded what detection could see, regardless of the requested resolution limit. Regenerated the C++ and TypeScript clients; the viewer and the web frontend each gained a "to detector edge" switch. Detection defaults are now per workflow (measured, not assumed) - Stills: adaptive detection, min-pix chosen per image, no resolution clipping. - Rotation: fixed-threshold finder, min-pix 2, 1.5 A limit. On a 33-crystal rotation battery, adaptive detection helped four hard crystals but deterministically broke three (a lost space group, a halved indexing rate, a collapsed merge), and the detector-edge limit cost indexing on a strong rotation set (100.0 -> 96.8%). Each is still overridable by its flag, and --no-adaptive-spots is new. Indexer seed escalation - Stop escalating once a seed's lattice explains >= 90% of the seed spots. Previously any frame with >= 80 spots always paid three indexer calls, online broker included. Merge-consistency filter - --min-image-cc gated on a per-image CC computed BEFORE the stills partiality post-refinement and never refreshed; the refiner now recomputes it, so the reported CC describes the data that are actually merged. - Replaced the per-call cc_mask argument with one MergeOnTheFly flag, so the merge, the error model and MergeStats can no longer disagree about which images are in (the --scale path merged unfiltered while its statistics were filtered). Per-image B-factor refinement (-B) removed - Measured on four serial-stills datasets: it is a no-op where the per-image fit is well conditioned and actively harmful where it is not (CC1/2 -8.1, R_meas +23.2 on the weakest large-cell set, whose fits hit their [-50, 200] bounds on 14-25% of images). It had also been silently DISCARDED since the partiality post-refinement landed - reported but not applied. Rather than fix and keep a knob with no demonstrated benefit, the flag and the whole image_scale_b_factor chain are gone: setting, scaling fit, message field, CBOR, HDF5 write and read-back, per-image plot, OpenAPI enum, viewer column and checkbox, docs. ScaleOnTheFly no longer needs Ceres at all - the fit is a linear IRLS. (The Wilson per-image b_factor is a different quantity and stays.) Stills partiality width now fits both of its components - sigma^2 = gamma0^2 + (gamma_e*d*)^2 instead of a purely angular gamma_e*d* with gamma0 pinned to 0. Fitted per crystal by least squares of dist_ewald^2 on d*^2. The angular-only width is fitted over a d*^2-dense population, so it was pinned by the high-resolution edge and collapsed at low d*: median partiality 0.008 beyond 13 A for reflections that were plainly recorded, 55% of them under the merge's partiality floor, and the survivors divided by those values - which inflated the merged low-resolution intensity scale 3.6x (~ +9 A^2 of apparent B). Measured on 5000 stills: the ramp flattens to 0.89x, no observation is dropped any more (701750 -> 716811), shell-mean CC1/2 and R-free improve slightly. Note CC1/2, R_meas, completeness and a B-refining R-free are all blind to that ramp, which is why it survived earlier validation; the cost is high-resolution R_meas (98.5 -> 101.9 shell-averaged). Removed dead code from add-then-remove churn - Prediction-time "still partiality" (unreachable: no setter), the phantom IndexingSettings::min_indexed_spot_fraction knob (getter, no setter - now the constant it always was), StillsPartialityRefine's caller-less Settings constructor and its reference to a long-gone env var, ProcessImage's unread bool return, an unused include, and a dead viewer overlay hook. Also - Viewer: the magnifier compared a QImage with itself, so its scene rect was set once ever and it could not pan into a larger dataset; the hover tail timer could fire after leaveEvent and resurrect the resolution readout outside the image. - update_version.sh regenerated the frontend lock file BEFORE bumping the version (every release shipped an off-by-one lock), and did git rm/git add on a path that has not existed since the client moved to src/client - with no set -e, both failed silently. - fpga/pcie_driver/postinstall.sh tested "[ ! occurrences > 0 ]", which is a redirect, not a test, so dkms add never ran. - Unit tests for the adaptive-threshold host functions, which had none. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 09:07:00 +02:00
leonarski_fandClaude Opus 4.8	a8c1006c49	Choose min-pix-per-spot adaptively per image for serial-stills indexing ... For stills indexing the minimum-pixels-per-spot filter is now chosen per image instead of being fixed: the frame is indexed at min-pix 3/2/1 and the setting that maximises indexed-spot count weighted by indexed fraction (n_indexed^2 / n_total) is kept, then integrated once at that min-pix. The fraction factor keeps a smaller min-pix's extra spots only when the lattice actually explains them, so strong frames retain their real weak spots (extending resolution) while noise-flooded frames stay strict. The mode is selected by the presence of --min-pix-per-spot, now optional (SpotFindingSettings::min_pix_per_spot is std::optional<int64_t>): omit it for the adaptive per-image path, give a value to force a fixed min-pix. It applies only to the stills indexing path -- rotation indexing builds one global lattice and keeps a fixed min-pix, and the online receiver and the FPGA host path always carry a concrete value, so neither changes. IndexAndRefine::ProcessImage now returns whether the frame indexed, to drive the per-image selection. Exposed in the jfjoch_viewer spot-finding settings (adaptive-threshold and adaptive-min-pix checkboxes, each greying out the control it overrides); the broker uses neither. Validated on the full rotation regression battery (no regression) and the whole serial-stills target battery at full image count. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 18:31:35 +02:00
leonarski_fandClaude Opus 4.8	9fdeed282a	Add fused GPU adaptive spot finder (azint + spot finding in one pass) ... AdaptiveSpotFinderGPU does the per-resolution-ring reduction once on the GPU and drives both products from it: the azimuthal-integration profile (corrected space) and the self-calibrating adaptive spot-detection threshold (raw counts). This replaces the separate GPU azint pass and the host-side adaptive spot finder that runs on the GPU path today. On a ~4.5 MP detector it does both jobs in ~1 ms/frame versus ~40 ms for the CPU adaptive finder (~42x), with an identical spot list and azimuthal profile. The per-ring threshold math (Poisson tail + read-floored Gaussian, operating point from the false-pixels-per-frame knob) is factored into AdaptiveThreshold.h so the CPU and GPU finders share one source of truth and cannot drift. Wired opt-in via a MXAnalysisWithoutFPGA constructor flag, default on for the rugnux offline path and the interactive viewer, off for the online receiver (so the broker path is unchanged). When on, Analyze() skips the separate azint pass and lifts the profile from the fused engine. The viewer gains an "Adaptive threshold" checkbox that greys out the signal/noise and photon-count sliders (the adaptive finder uses neither). Dedicated tests exercise both products (spot-finding parity vs the CPU finder, azimuthal profile vs a standalone GPU azint) plus a speed benchmark. Validated end-to-end on lysozyme serial stills: fused == CPU-adaptive index rate and merge stats. Docs: new section 3.2 in docs/CPU_DATA_ANALYSIS.md. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 20:10:45 +02:00
leonarski_fandClaude Opus 4.8	014e43a4c9	Remove non-helping stills merge/scaling knobs ... Trims three opt-in stills parameters that did not improve data quality on the external-reference (PDB R-free) battery and only added code: - --partiality-uncertainty: the (1-p)/p merge-sigma term was null on all four serial-stills datasets of the battery vs their reference structures (and neutral-to-harmful at higher coefficients); removed the flag, setting and CorrectedSigma term. - --stills-modulation: the detector-plane flat-field surface was net-negative on flooded data; removed the flag, setting and MergeOnTheFly::RefineModulation (the rotation modulation in RotationScaleMerge is unaffected). - --min-indexed-fraction: every value other than the 0.20 default collapsed CC1/2; removed the override flag/setter, keeping the fixed 0.20 acceptance floor. Default behaviour is unchanged (all three were off / at their default). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 17:40:48 +02:00
leonarski_fandClaude Opus 4.8	1a2b0181a5	Add physical partiality post-refinement for stills (default on) ... Replace the frozen scalar-sigma stills partiality with a physical, refined model. Per crystal, refine an orientation tilt (dpsi_x, dpsi_y) against the running merge and recompute each reflection's partiality analytically from the refined geometry (angular Ewald-proximity model, sigma(d*) = gamma_e*d*), with the per-crystal scale G profiled out by the existing robust IRLS - no re-integration. A soft Gaussian prior on dpsi tames weak-data overfit while staying inert on strong data. The merge <-> refine loop iterates a few times. This is now the stills default via ScalingSettings::stills_partiality_refine (on). A single opt-out flag `--simple-stills` reverts to treating every reflection as a full (p=1, single pass). Retires the experimental `--still-partiality` flag. The viewer gains a "Partiality post-refinement (stills)" checkbox in Scaling settings. Validated (integrate-once / --scale): CC1/2 and R_meas both improve on three monochromatic serial-stills datasets (+2.8 / -10, +5.6 / -3.4, +2.1 / -4); neutral on a pink-beam DMM set (already-full reflections); R-free/R-work down vs a fixed model; competitive with CrystFEL partialator on matched frames. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 14:45:43 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	54c667190f	v1.0.0-rc.155 (#65) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Remove pixelrefine option (replaced with ProfileIntegrate2D) * jfjoch_viewer: Some graphical improvements. * jfjoch_viewer: Simplify und unify data analysis settings. * jfjoch_writer: Add TCP keepalive to increase robustness if jfjoch_broker "dies" in the middle of data acquisition. Reviewed-on: #65	2026-06-25 22:01:48 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00