9 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 4.8	a8c1006c49	Choose min-pix-per-spot adaptively per image for serial-stills indexing ... For stills indexing the minimum-pixels-per-spot filter is now chosen per image instead of being fixed: the frame is indexed at min-pix 3/2/1 and the setting that maximises indexed-spot count weighted by indexed fraction (n_indexed^2 / n_total) is kept, then integrated once at that min-pix. The fraction factor keeps a smaller min-pix's extra spots only when the lattice actually explains them, so strong frames retain their real weak spots (extending resolution) while noise-flooded frames stay strict. The mode is selected by the presence of --min-pix-per-spot, now optional (SpotFindingSettings::min_pix_per_spot is std::optional<int64_t>): omit it for the adaptive per-image path, give a value to force a fixed min-pix. It applies only to the stills indexing path -- rotation indexing builds one global lattice and keeps a fixed min-pix, and the online receiver and the FPGA host path always carry a concrete value, so neither changes. IndexAndRefine::ProcessImage now returns whether the frame indexed, to drive the per-image selection. Exposed in the jfjoch_viewer spot-finding settings (adaptive-threshold and adaptive-min-pix checkboxes, each greying out the control it overrides); the broker uses neither. Validated on the full rotation regression battery (no regression) and the whole serial-stills target battery at full image count. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 18:31:35 +02:00
leonarski_fandClaude Opus 4.8	9fdeed282a	Add fused GPU adaptive spot finder (azint + spot finding in one pass) ... AdaptiveSpotFinderGPU does the per-resolution-ring reduction once on the GPU and drives both products from it: the azimuthal-integration profile (corrected space) and the self-calibrating adaptive spot-detection threshold (raw counts). This replaces the separate GPU azint pass and the host-side adaptive spot finder that runs on the GPU path today. On a ~4.5 MP detector it does both jobs in ~1 ms/frame versus ~40 ms for the CPU adaptive finder (~42x), with an identical spot list and azimuthal profile. The per-ring threshold math (Poisson tail + read-floored Gaussian, operating point from the false-pixels-per-frame knob) is factored into AdaptiveThreshold.h so the CPU and GPU finders share one source of truth and cannot drift. Wired opt-in via a MXAnalysisWithoutFPGA constructor flag, default on for the rugnux offline path and the interactive viewer, off for the online receiver (so the broker path is unchanged). When on, Analyze() skips the separate azint pass and lifts the profile from the fused engine. The viewer gains an "Adaptive threshold" checkbox that greys out the signal/noise and photon-count sliders (the adaptive finder uses neither). Dedicated tests exercise both products (spot-finding parity vs the CPU finder, azimuthal profile vs a standalone GPU azint) plus a speed benchmark. Validated end-to-end on lysozyme serial stills: fused == CPU-adaptive index rate and merge stats. Docs: new section 3.2 in docs/CPU_DATA_ANALYSIS.md. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 20:10:45 +02:00
leonarski_fandClaude Opus 4.8	014e43a4c9	Remove non-helping stills merge/scaling knobs ... Trims three opt-in stills parameters that did not improve data quality on the external-reference (PDB R-free) battery and only added code: - --partiality-uncertainty: the (1-p)/p merge-sigma term was null on all four serial-stills datasets of the battery vs their reference structures (and neutral-to-harmful at higher coefficients); removed the flag, setting and CorrectedSigma term. - --stills-modulation: the detector-plane flat-field surface was net-negative on flooded data; removed the flag, setting and MergeOnTheFly::RefineModulation (the rotation modulation in RotationScaleMerge is unaffected). - --min-indexed-fraction: every value other than the 0.20 default collapsed CC1/2; removed the override flag/setter, keeping the fixed 0.20 acceptance floor. Default behaviour is unchanged (all three were off / at their default). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 17:40:48 +02:00
leonarski_fandClaude Opus 4.8	1a2b0181a5	Add physical partiality post-refinement for stills (default on) ... Replace the frozen scalar-sigma stills partiality with a physical, refined model. Per crystal, refine an orientation tilt (dpsi_x, dpsi_y) against the running merge and recompute each reflection's partiality analytically from the refined geometry (angular Ewald-proximity model, sigma(d*) = gamma_e*d*), with the per-crystal scale G profiled out by the existing robust IRLS - no re-integration. A soft Gaussian prior on dpsi tames weak-data overfit while staying inert on strong data. The merge <-> refine loop iterates a few times. This is now the stills default via ScalingSettings::stills_partiality_refine (on). A single opt-out flag `--simple-stills` reverts to treating every reflection as a full (p=1, single pass). Retires the experimental `--still-partiality` flag. The viewer gains a "Partiality post-refinement (stills)" checkbox in Scaling settings. Validated (integrate-once / --scale): CC1/2 and R_meas both improve on three monochromatic serial-stills datasets (+2.8 / -10, +5.6 / -3.4, +2.1 / -4); neutral on a pink-beam DMM set (already-full reflections); R-free/R-work down vs a fixed model; competitive with CrystFEL partialator on matched frames. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 14:45:43 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	54c667190f	v1.0.0-rc.155 (#65) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Remove pixelrefine option (replaced with ProfileIntegrate2D) * jfjoch_viewer: Some graphical improvements. * jfjoch_viewer: Simplify und unify data analysis settings. * jfjoch_writer: Add TCP keepalive to increase robustness if jfjoch_broker "dies" in the middle of data acquisition. Reviewed-on: #65	2026-06-25 22:01:48 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00