5 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	92f2e0309e	Keep the raw file alive while it is read without the lock ... GetRawImage takes the chunk address under hdf5_mutex, drops the lock, and then reads through a borrowed RawFile*. ReadFile() and Close() both take that same lock and call Clear(), which empties the dataset cache and closes the descriptor - so a read racing a close read through a freed object and a recycled fd. Not reachable today, since the only callers of GetRawImage are the rugnux workers and jfjoch_extract_hkl and neither closes concurrently, but the whole point of the change is that the read happens outside the lock. Share the RawFile rather than borrowing it, so the descriptor outlives a Clear() that races it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01VfYvJT5Nb71suJCowRBn5z	2026-08-23 12:44:04 +02:00
jungfrauandClaude Opus 5	c254081e58	Ask HDF5 where an image is, then read it without the lock ... Two things every worker thread of an offline run did inside the global HDF5 mutex, per image. It opened /entry/data/data and asked it for its dataspace, its datatype and its creation plist, then asked those for the rank, the dimensions, the chunking and the compression. All of that is a property of the file and identical for all of its images, so it is now resolved once when the file is first touched. And it read the pixels - megabytes of them, with the lock held, which is what turned a worker per hardware thread into a queue. HDF5 can say where a chunk lives instead - address and byte count, a lookup in the chunk index with no read attached - so that is all it is asked for now, and the bytes are fetched after the lock is dropped, with a positional read that any number of threads can make through one handle at once. Chunk addresses count from the end of the user block, so its size is added; zero for anything this project writes, not for every file. A file that is not one chunk per image, or a chunk that was never written and exists only as a fill value, still goes the old way - only HDF5 knows what those read as. On a 16 Mpx rotation dataset with the process file being written, the per-image loop at 48 workers goes 12.4 s -> 6.8 s, and stops getting slower as workers are added: 8 workers were faster than 48 before, and are not now. Where no process file is written the same loop only improves ~1%, because this machine has 1.5 TB of RAM and held the whole 7 GB test set in page cache - the read was never the expensive part here. It is where the cache is cold or the filesystem is remote. Battery 9m45s, space group 21/24, no failures, unchanged. The Windows path uses ReadFile with an OVERLAPPED offset for the same reason pread is used elsewhere: it takes the offset as an argument rather than moving a shared file position, so the viewer keeps building under MSVC and gets the same concurrency. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-23 12:42:47 +02:00
leonarski_fandClaude Opus 5	d01e69e407	rugnux: describe the linked images in _process.h5, not the processing container ... _process.h5 is an NXmxIntegrated master that links to the ORIGINAL image files rather than writing images of its own (write_images = false). Its pixel metadata therefore has to describe those files - but it was filled from experiment_, which Rugnux pins to signed 32-bit because that is the container HDF5MetadataSource hands images out in. The virtual dataset was consequently typed int32 over unsigned 16- or 32-bit sources, so HDF5 converted every value on read: the 0xFFFFFFFF error marker of a uint32 source does not survive, and error_value and underload_value described a container the file does not contain. Our own reader never saw it, because it resolves the mapping and opens the source file itself. Only consumers that go through the virtual view - DIALS, XDS via Durin, plain h5py - read the converted values. Take the format from the reader instead. GetStoredPixelFormat() reports the bit depth and signedness of /entry/data/data as stored, which is deliberately not the same thing as the experiment's image format, and rugnux fills the start message from it. The writer is left alone on purpose: it must be able to produce a master before the mapped files exist, or when they are not readable, and the mapping strips the source directory, so it cannot open them to ask. Measured on a 20-image set with int16 sources: the _process.h5 virtual dataset goes from H5T_STD_I32LE to H5T_STD_I16LE, matching the source, and DIALS reports trusted_range (-32767, 32765) instead of (-2147483647, 32765). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 18:24:31 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00