8 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	6140de7249	rugnux: the unmerged MTZ carries the sensor efficiency in its own column, not inside LP ... LP is a column other programs read and un-apply. It is documented as the Lorentz-polarization factor, and until the sensor efficiency was folded into the same product that is what it held. Measured on our own unmerged file, LP spanned a factor of 1.1343 across the detector where pure L/P spans nothing of the sort - the excess is the efficiency, 13% end to end at 13 keV and 34% at 18 keV. Both reference implementations keep it out. Recomputing pure L/P from a stored XDS file's own geometry over its 124k reflections leaves RLP flat to 0.1% from 8.6 to 33.7 degrees, where a folded-in efficiency would have shown a 7% trend - and XDS has the sensor numbers in hand. DIALS fills LP from lorentz and polarization alone and writes QE as a separate column, even a column of ones. Split them: LP is L/P again, QE is the efficiency, and the intensity is unchanged, so a reader that un-applies LP recovers what it expects and one that wants raw counts divides by LP and multiplies by QE. Only the unmerged file moves - every other column is bit-identical and the file grows by exactly one float per reflection plus one header record. The merged files are byte for byte what they were. The process file gains an optional qe dataset beside the existing one rather than changing what that one means, so a file written before the efficiency existed still loads, and reads back as a correction of exactly one - which is what it was. It is stored rather than recomputed on read because the writer has no geometry to recompute it from, and because recomputing would have written a radial trend into every stored file that never had one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EFEJG6WBQv8th4UJFNe53N	2026-09-05 14:29:45 +02:00
leonarski_fandClaude Opus 5	db9cc9106f	rugnux: the per-reflection correction factor is named for what it is, not for what it once held ... The factor multiplied into each integrated intensity was called rlp, for reciprocal Lorentz-polarization, and until this week that is all it held. It now also carries the sensor efficiency at the angle the beam arrives, and on the stills path it holds that efficiency and the polarization with no Lorentz term at all - correctly, since the Lorentz factor of a still is one. Three different products under one name that promises exactly one of them, in code where the neighbouring member is the total correction. Rename it prescaling_corr: multiplicative, applied before scaling, therefore not a scale, and silent about its contents - which is the point, since the contents have now grown twice. It is also what DIALS calls the same product. The stills refinement member spelled "1 / rlp" becomes inv_corr, and the comments and usage text that promised "the Lorentz-polarization factor and nothing else" now say what is actually there. The Lorentz term keeps its own name where it is computed, because that name is correct. The two external spellings are untouched: the CBOR key and the reflection dataset are a published format, and a reader that meets an unknown key would take the factor as zero, which both the merge key and the ingest treat as a reflection to drop - so every reflection would vanish and the run would still exit zero. No output changes: the merged and unmerged files of two full runs are byte for byte what the previous binary wrote, four stored files from before the efficiency correction still re-scale identically, and the reflection datasets of the process file are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EFEJG6WBQv8th4UJFNe53N	2026-09-05 13:41:16 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	1ab257af6c	v1.0.0-rc.125 (#32) ... This is an UNSTABLE release. This version adds scalign and merging. These are experimental at the moment, and should not be used for production analysis. If things go wrong with analysis, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Improve logic on switching on/off spot finding * jfjoch_broker: Increase maximum spot count for FFBIDX to 65536 * jfjoch_broker: Increase default maximum unit cell for FFT to 500 A (could have performance impact, TBD) * jfjoch_process: Add scalign and merging functionality - program is experimental at the moment and should not be used for production analysis * jfjoch_viewer: Display partiality and reciprocal Lorentz-polarization correction for each reflection * jfjoch_writer: Save more information about each reflection Reviewed-on: #32 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-18 16:17:21 +01:00
leonarski_f	07fe4dd3bb	v1.0.0-rc.124 (#31) ... This is an UNSTABLE release. This version significantly rewrites code to predict reflection position and integrate them, especially in case of rotation crystallography. If things go wrong with analysis, it is better to revert to 1.0.0-rc.123. * jfjoch_broker: Improve refection position prediction and Bragg integration code. * jfjoch_broker: Align with XDS way of calculating Lorentz correction and general notation. * jfjoch_writer: Fix saving mosaicity properly in HDF5 file. * jfjoch_viewer: Introduce high-dynamic range mode for images * jfjoch_viewer: Ctrl+mouse wheel has exponential change in foreground (+/-15%) * jfjoch_viewer: Zoom-in numbers have better readability Reviewed-on: #31 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-01 13:29:33 +01:00
leonarski_f	c67337cfe1	v1.0.0-rc.72	2025-09-08 20:28:59 +02:00