Going to the Error state after any acquisition failure forced an expensive
re-initialisation (reconnect + full detector config + pedestals), even when the
detector was still perfectly configured and only a transient problem occurred.
Split failures into two classes:
- ordinary acquisition failures (receiver/writer/analysis problems, missed
packets, writer disconnect) return to Idle with an Error-severity message, so
the run can be retried without re-initialising;
- failures that leave the detector in an undefined state throw the new
JFJochCriticalException and still go to Error, forcing re-initialisation.
The detector layer is the single source of truth for "detector faulted":
SLSDetectorWrapper::InternalStop and DectrisDetectorWrapper::CheckBusyOrError
raise JFJochCriticalException on the ERROR state, and JFJochServices::Stop raises
it when the detector does not return to idle at the end of a run. MeasurementThread
dispatches purely on exception type - no detector-status field checks.
Also:
- JFJochServices::Start now stops the receiver it launched if the detector fails
to start, so the service returns to idle cleanly and the run can be retried.
- A synchronous Start rethrows the failure to the caller (HTTP layer) via a
stored exception_ptr, so a failed start is no longer reported as HTTP 200.
- JFJochServices::Stop no longer throws on a writer error; it is reported through
receiver_output.writer_err and surfaced as an Idle + Error-severity message,
which makes the previously-dead writer_err branch in MeasurementThread live.
Initialisation, calibration/pedestal, SelectDetector and Deactivate keep the
Error-state behaviour, as those genuinely leave the system in an undefined state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output.
* jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling.
* Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool.
* jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection.
* jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata.
* CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing
* jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files
* jfjoch_broker: Add ROI calculation in non-FPGA workflow
* jfjoch_broker: Fixes to TCP image pusher
* jfjoch_broker: Remove NUMA bindings
* jfjoch_broker: Improvements to indexing
* jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values
* jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors
* jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs
* jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results
Reviewed-on: #63
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M)
Reviewed-on: #54
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start`
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start'
* jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time
* jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received
* jfjoch_broker: Use nanoseconds internally for frame/image/readout time
* jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished)
* jfojch_broker: Improve profiling of different data analysis steps
* jfjoch_broker: Record integration reflection count
* jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds)
* jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked
* jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets
**Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time.
Reviewed-on: #49
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time
jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations
jfjoch_broker: Goniometer axis name is converted to lowercase
jfjoch_broker: Fix bug, where wrong HTTP error codes were returned
jfjoch_broker: Improve sigma estimation during merging (K. Takaba)
---------
Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch>
Reviewed-on: #48
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Better track time for each operation in the processing stack
* jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress)
* jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress)
* jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0)
Reviewed-on: #46
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4)
* jfjoch_viewer: Improve image render performance
Reviewed-on: #44
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124.
* jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files)
* jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction
* jfjoch_broker: Image pusher statistics are accessible via the REST interface
* jfjoch_writer: Supports TCP image socket and for these auto-forking option
Reviewed-on: #36
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release.
* jfjoch_broker: Improve performance of binary plot export
Reviewed-on: #27
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.111 instead).
* jfjoch_broker: Default spot finding settings can be configured via config JSON
* jfjoch_viewer: FFT analysis of data in the dataset plot
Reviewed-on: #22
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release.
jfjoch_broker: Fix output during mask data collection
Reviewed-on: #4
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.96 instead).
* jfjoch_broker: For DECTRIS detectors fix dark data collection during initialization
Reviewed-on: #3
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.96 instead).
* jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask
* jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems)
* jfjoch_viewer: Add option to handle user pixel mask (experimental)
* jfjoch_viewer: More options for ROI
* jfjoch_viewer: Add window to display calibration
Reviewed-on: #2
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
leonarski_fandClaude Opus 4.8
