5 Commits

Include renames

Author	SHA1	Message	Date
leonarski_f	9aae0c2ba7	v1.0.0-rc.169 (#79) ... * Building Jungfraujoch no longer needs zlib or Eigen installed on the machine, and the dependencies the build fetches are pinned and updated to current releases. * rugnux: improvements in indexing, lattice selection and geometry post-refinement, which index crystals that previously returned no lattice and keep the better of the two geometries a run measures. * rugnux: improvements in beam-centre measurement, beam-stop detection and space-group determination. * rugnux: the unit cell reported with a determined space group now obeys that group - a cell whose symmetry was confirmed from the intensities is re-refined under it, and a cell the group cannot describe is reported with a warning rather than as it stands. * rugnux drops the stretches of a rotation sweep whose removal measurably improves the merged intensities and reports what became of every frame, and decides the resolution cut on the crystal's own diffraction rather than on its ice rings. * The rugnux results report is machine-readable - every line that is not `KEY= value` data starts with `#` - and states the build it was written by, its authorship and its terms of use (`REPORT_VERSION= 8`). * `jfjoch_viewer`: improvements in the file manager (CBF frames beside HDF5 datasets, a remembered root), the dataset plots, the inspector and the image statistics, plus a settable font size, a view of the rugnux results report, usable performance over a remote display (`ssh -X`) and a reset of all settings to defaults; the reciprocal-space window is removed. * Broker fixes around DECTRIS collections and dark-mask calibration: re-initialising after a run that never started no longer freezes the broker, a cancelled calibration is abandoned instead of reported as done, and a collection whose start message never arrives ends by itself. Reviewed-on: #79 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-15 17:09:31 +02:00
leonarski_f	77bc0cfe52	v1.0.0-rc.168 (#78) ... * rugnux is substantially faster - a corpus of 145 rotation datasets processes in about two thirds of the time - with identical results. * A crystal whose lattice looks more symmetric than it is because the beam centre is off is no longer processed on the wrong cell. * rugnux prints at startup, and writes at the foot of every results report, a short acknowledgement of the X-ray research community whose methods it implements and of the open-source projects it builds on; `ACKNOWLEDGEMENT.md` now ships in every package beside `LICENSE` and `THIRD_PARTY_NOTICES.md`. Reviewed-on: #78 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-10 13:51:16 +02:00
leonarski_f	a39fd29f77	v1.0.0-rc.167 (#77) ... * `rugnux --model` reports CC(model, data) - the correlation of the merged intensities with the placed, scaled model - by resolution shell, on the same shells as CC1/2, with the reflection count and a significance for each. * `rugnux --model` fits the model's scale, anisotropic B and bulk-solvent parameters on the working reflections only, so the R-free it reports is measured against a model no free reflection helped scale. * The bulk-solvent parameters of `rugnux --model` are searched over their physically meaningful range instead of being fitted without bounds, so a model is never scaled with a solvent term that has silently switched itself off. * The rigid-body placement of `rugnux --model` uses the same bounded bulk solvent as the reported fit, so a model is no longer placed against a target carrying a solvent term with no physical meaning. * `rugnux --model` puts the model into the data's own description of the lattice before placing it, so a model whose cell is written on other axes - I-centred where the run indexed C-centred, a different unique axis, a permuted orthorhombic cell - is placed rather than scored where it was read; `MODEL_CHANGE_OF_BASIS=` and `MODEL_SETTING_AS_READ=` report it when it happens. * The rugnux results report opens with a summary - `VERDICT=` (`OK`, `WARNINGS`, `UNUSABLE`, `FAILED`), `VERDICT_TEXT=`, `PATHOLOGY_FLAGS=` with one closed-vocabulary code per condition that warned, and the `WARNING:` lines, which used to close the file - and the sections after it are renumbered 1-5 with no gaps. * `rugnux --developer` writes the full results report - the pipeline-internal keys and the long explanations the default report now leaves out - and `--finalist-ledger` adds the evidence for every space group the search considered, not only the one it adopted. * The results report warns when the merged data carry no usable signal and when too little of reciprocal space was measured inside the fitted resolution, and omits `FITTED_RESOLUTION` where the CC1/2 curve it is fitted on never falls off. * rugnux detects translational pseudo-symmetry and reports it under the `PSEUDO_TRANSLATION` flag as `TNCS_DETECTED=` and the `TNCS_*` keys - a translation the merged data are exactly invariant under is reported as `UNDECLARED_LATTICE_TRANSLATION=` under `LATTICE_TRANSLATION` instead - and a detected pseudo-translation can no longer buy a false screw axis in the space-group search or hide a twin from the L-test (`L_TEST_VS_TNCS=`). * The space-group search determines glide planes from zonal systematic absences, so a non-Sohncke space group such as P 2_1/c or Pbca is named where the run previously stopped at its Sohncke subgroup; `SOHNCKE_SPACE_GROUP=` carries the best Sohncke group beside it on every run that searched, and a centre of symmetry is never claimed. * Where the cell metric carries more rotational symmetry than the Bravais class the indexer named, the extra rotations are put to the intensities and the space-group search is asked again on the metric's own cell - adopted only where the intensities confirm the higher symmetry - so a lattice that is nearly but not exactly hexagonal, or whose reduction landed in a sub-cell, still reaches its true point group. * Systematic-absence calls rest on the evidence rather than on counts: a screw axis whose absent class the data show extinct is no longer refused because a handful of reflections in it read as present, and `SPACE_GROUP_ALTERNATIVES=` no longer drops a candidate that differs only on a zone the sweep never measured. * A reference correlation measured on too few reflections is refused instead of scored zero, so a run given a reference MTZ is no longer reindexed on an operator that mapped almost everything outside the reference's coverage. * A frame counts as indexed from 6 spots on its lattice rather than 9, so a weakly diffracting crystal whose frames cannot carry 9 is no longer refused the lattice it fits; `--min-indexed-spots` overrides it. * `-C` accepts a known cell in any equivalent description - conventional or primitive, centred or not - instead of only the reduced primitive form, so a centred cell given the way it is published no longer makes the run report that it found no lattice. * Each reflection is corrected for the sensor's quantum efficiency at the angle it meets the detector (attenuation lengths from the NIST tables, which also fixes the spot-width parallax term on CdTe) and for the attenuation of the flight path between the sample and its pixel; `--flight-path air|helium|vacuum` declares the medium - default air, since no file states it - and the report says what was assumed and what it was worth. The unmerged MTZ records the factors in new `QE` and `FLIGHT` columns beside `LP`, so raw counts are `I / LP * QE * FLIGHT`, and `_process.h5` in new optional `qe` and `flight` datasets. * Rotation geometry post-refinement fits the crystal and the detector at once, against the observed spot positions and the observed rocking angles together, so the refined distance depends far less on how wrong the file's distance was. * A coarsely sliced sweep integrates correctly: partials are joined into one rocking event by angle rather than by frame count, so two crossings of the Ewald sphere are no longer summed into one full, and at 0.5 degrees per image or coarser the per-frame geometry refinement accepts a spot whose miss the exposure's own rotation accounts for. * `rugnux --mode scale` reports the detector tilt and direct beam of the geometry it re-scaled at, instead of zeros that read as a flat detector, and no longer warns that no image was indexed on a run whose lattice came from its input file. * Every rotation run that determined a space group and merged reports what the mounting cost: `SPINDLE_LOST_UNIQUE_FRACTION=` is the fraction (0-1) of unique reflections the mounting made unmeasurable under the measured point group, also written to the master as `/entry/MX/spindleLostUniqueFraction` and what the mounting warning fires on; `SPINDLE_SYMMETRY_AXIS_ANGLE_DEG=` / `SPINDLE_SYMMETRY_AXIS_ORDER=` describe the mounting in the `--developer` report. * Stills and grid scans carry a per-image `spindle_blind_fraction` - how much of a rotation sweep's blind cone this orientation would make unrecoverable, 0.5 and above calling for a second orientation - through the CBOR stream, HDF5 (`/entry/MX/spindleBlindFraction`), the plot and scan-result APIs, and the viewer and frontend plots; an absent value means the frame could not be assessed and is not a 0. * The results report's `REPORT_VERSION` is 7. Reviewed-on: #77 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-09 07:25:13 +02:00
leonarski_f	680c36c20d	v1.0.0-rc.166 (#76) ... * `rugnux --mode calibration` writes `<prefix>.json` beside the `.poni`, whose `dataset_settings` member is a `jfjoch_broker` `dataset_settings` body as it stands. * `rugnux` and `jfjoch_viewer` read PILATUS miniCBF sweeps natively, without conversion. * Masters written by other facilities open, including Eiger 1.x and third-party NXmx variants. * `rugnux` measures the beam centre on every run, and indexes with it when the file's value indexes nothing. * A detector swung out on a 2theta arm is placed where the file says it stands, and the calibration can hold the tilt fixed. * `rugnux` writes the unmerged MTZ by default, and a P1 merge beside it, so a wrong space group can be re-merged without reprocessing. * Significant improvements to symmetry handling in `rugnux`: the lattice, the point group, the setting and the systematic absences. * The `rugnux` report gives the resolution the CC1/2 fit reached, beside the range the reflections were written to. * The `rugnux` report gives the twinning statistics measured before the space group was decided, beside the ones measured after. * The `rugnux` report gives the strong-direction diffraction limit, and warns when CC1/2 is not monotone with resolution. * `rugnux` ranks screw axes on the evidence their absences carry, rather than on how many control reflections a candidate happens to have. * Twinning is no longer reported when the L-test contradicts it. * The `rugnux` report gives the detector tilt, the measured tilt and the direct beam beside the beam centre, and a post-refined beam centre is judged against the run's own measurement rather than the file's. * `--no-refine-tilt` holds the detector tilt at the value in the file, instead of zeroing it, when the calibration starts from the spots. * The `jfjoch_viewer` grid scan view draws the cells in the proportion of the scan steps, so the map has the shape of the scanned area. Reviewed-on: #76 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-02 21:17:31 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00