87 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	fdfc9b1f90	Broker: a failed calibration is an Error, and ending a run clears what it left ... Three things a caller could not see, all in the same lifecycle. A calibration that FAILS now goes to Error rather than Inactive. The wait endpoints turn Error into a 500 carrying the message, while Inactive is a bodiless 502 - so the reason a pedestal or mask sequence failed was thrown away on the way out. Inactive is also where a deliberate Deactivate() leaves the broker, which made a failure indistinguishable from a detector someone had powered down. Initialize() clears Error, so recovery is what it was. The four CANCELLATION paths keep Inactive: a cancel is not a failure, and c29dd67b5 separated the two deliberately. Cancel() and Deactivate() clear start_exception. JFJochStateMachine.h says every entry point that begins new work clears it; these two end work instead, and were missed. A failed /start followed by /deactivate left every later wait call rethrowing a failure from a run on a detector that is no longer powered, until some later /start or /initialize happened to clear it. Start() and Deactivate() clear scan_result. It is only ever assigned at the end of a successful measurement, so a run that failed to start left /scan_result answering with the PREVIOUS run's images, under the new run number and with nothing to mark them as not its own - the same stale-read Initialize() has always cleared. Deactivate() clears it for the same reason it clears the rest: the result describes a measurement on a detector being turned off. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_016L1qig74oYQzfUJJZbbxFh	2026-08-27 22:09:51 +02:00
leonarski_fandClaude Opus 5	41983ca589	Broker: refuse a run the writer cannot write before arming the detector ... A writer refusing to overwrite an existing file was reported badly, and the earlier fix only covered half of it. The commit message of a6a715703 states the assumption that broke: "SendStartMessage precedes every std::async in the receiver constructor". That is true of JFJochReceiverFPGA, where the start message goes out from the constructor body, and false of JFJochReceiverLite, where it goes out from MeasurementThread - launched by std::async from the constructor, which waits only on data_analysis_started. On the DECTRIS path the writer's refusal therefore cannot reach services.Start(); it arrives from services.Stop(), i.e. the second try-block of the state machine's MeasurementThread, which never touched start_exception. /wait_till_done answered 200 for a run that never wrote anything. Two changes, in front of the problem and behind it. In front: a PREFLIGHT frame (TCP protocol version 3 -> 4), sent to every writer before the receiver is built and before the detector is armed. It carries the same CBOR start message a START does and asks one question: could this run be written? The writer runs FileWriter::Preflight - the first three statements of the FileWriter constructor, stopping short of the only one that creates anything - and answers with an ACK. Shared code, so a pre-flight that passes cannot be contradicted by the start behind it. A refusal is not fatal: nothing was started, the connection stays usable, and above all no series is left armed waiting for a trigger that will not come. Both ends already reject a frame of another protocol version, so the bump costs no compatibility. The check now covers the data files, not only the master. A stale _data_000001.h5 used to sail through and fail when the file was renamed into place at the end of the run, after the whole dataset had been collected. The writer holding the master file checks for all of them - they share a directory by construction, the master linking them by relative name - so the siblings do not race each other statting files the others are creating. Behind: /wait_till_done maps an Idle state to 200 or 500 by the severity of the end-of-run message, so a collection that lost packets, or whose writer could not write, is no longer indistinguishable from a good one to a script. A cancelled collection is not affected - MeasurementThread checks the cancel before it looks at the completeness of the data, and reports it with Info severity - and a warning is still a 200. start_exception is untouched. The PREFLIGHT payload is built from FillMessage alone, which is what keeps it small: the per-pixel arrays are added by SendStartMessage and are not in it. Measured on a JUNGFRAU 9M, 1.4 kB against 543 kB for the start message. It is deliberately the whole of FillMessage rather than the fields the check reads today - a hand-picked subset would answer for a different set of file names the day the check learns to read one more field, and would do it silently. Three defects found on the way: TCPImagePuller republished a PREFLIGHT as a real start message, announcing to downstream consumers a run that was not going to happen. TCPStreamPusher::run_number was a plain uint64_t written by the control thread and read by every ACK thread; Preflight adds a second writer to it. StreamWriter::CollectImages reprocessed the last frame whenever WaitForImage returned false - run is only tested at the top of the loop - so an abort wrote the last image a second time. Pre-existing; the new branch made it visible. Verified against a running broker on the local configuration: a colliding master file and a colliding data file are both refused by /start, /wait_until_running and /wait_till_done with the writer's own message, and the log shows the receiver was never started for either; a cancelled collection still answers 200. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_016WmryXe8ASbNi632sUMfsa	2026-08-27 22:09:50 +02:00
leonarski_f	749db470ca	v1.0.0-rc.164 (#74) ... * rugnux now tells you whether a crystal diffracts anisotropically and how far it reaches in each direction, without a second program: a new `9. DIFFRACTION ANISOTROPY` section in `<prefix>_report.txt` and matching `_reflns.pdbx_aniso_B_tensor_*` / `_reflns.jfjoch_aniso_*` items in the merged mmCIF report the anisotropic deltaB, the diffraction limit along each principal direction, and a `NOT DETECTED` / `DETECTED` / `CANNOT DETERMINE` verdict measured against the data set's own systematic error. It is a description only - no intensity is corrected, no reflection is removed, and the merged data do not depend on direction. * rugnux can hand its integrated observations to another scaling program: `--export-unmerged` writes `<prefix>_unmerged.mtz`, an unmerged MTZ readable by aimless, pointless, careless and `iotbx.merging_statistics`, in `--mode mx` and `--mode scale` alike. Each rotation reflection's partials are summed into one full; `--export-unmerged-partials` writes one row per image instead. Intensities carry the Lorentz-polarization factor and nothing else, since those programs scale the data themselves. Lattice-centring absences are not written; screw and glide absences are. * rugnux integrates crystals with broad spots better - where it changes anything, per-shell mean I/sigma improves by up to 31% and R_meas by up to 24% - because on rotation data the integration signal radius is now taken from the crystal's own measured spot width instead of a fixed 4 px. `--adaptive-integration-radius=off` restores the fixed radius and an explicit `--integration-radius` still overrides both. The widened radius applies to the final integration pass only, and a pattern too dense for it is re-integrated at 4 px with a note in the log. * rugnux discards fewer stills reflections for want of a background ring, improving per-shell R_meas over most of the signal-bearing range: the stills background ring now runs to 14 px instead of 12. The gain reverses in shells below a mean I/sigma of about 4. * rugnux determines the space group with thresholds that mean the same thing on a weak crystal as on a strong one: symmetry operators are scored on resolution-normalised intensities (E squared) instead of raw merged intensities, and a reflection counts as genuinely present on its counting significance instead of on the merged I/sigma, which saturates at the merge's own ISa. The search resolution cut is no longer able to move the answer, and the twin-law H bound moves from 1.70 to 1.85, which stops one class of correct high-symmetry assignment being refused as twinning. * rugnux says what the space-group search tested and what it could not: the twin-law disagreement H is printed for every operator together with the adopted point group's H ratio and its bound; alternatives that are not on the reported lattice are named with how their cell differs; and a lattice centring the data could not test - the crystal having been integrated on the primitive sub-cell, so the reflections it extinguishes were never measured - is marked `UNTESTED` and warned about where it is adopted, as coming from the lattice metric rather than from the intensities. * rugnux `--mode scale` re-merges a `_process.h5` in the right symmetry without being told it: the file now records the space group on every run - a two-pass rotation run wrote none before, so re-merging defaulted to P1 - together with the change of basis under `/entry/MX/reindexMatrix` where the lattice was re-seated, and `--mode scale` also reports the Wilson B-factor estimate instead of `WILSON_B= nan`. A file written before this stops with a message naming the two cells and the override to use, instead of failing inside the merge. A third-party reader of a `_process.h5` must apply `reindexMatrix` where it is present. * rugnux installs on its own, as a package called `rugnux` - `dnf install rugnux` or `apt install rugnux` - instead of arriving inside `jfjoch-viewer`. It pulls in none of the acquisition stack, so a machine that only processes data no longer has to carry the broker, the detector libraries or Qt to get it. Installing it over a `jfjoch-viewer` from rc.163 or earlier, which still owns `/usr/bin/rugnux`, upgrades cleanly rather than failing on the duplicate file. * rugnux is also a standalone download, built for arm64 as well as x86_64: `rugnux-<version>-linux-{x86_64|aarch64}-cuda<major>.tgz` and `rugnux-<version>-win64-cuda<major>.zip` on the release page, for machines that are not managed by a package manager. The aarch64 build targets GH200 and DGX Spark, and is untested on hardware. * Every portable Linux binary is now a single self-contained file: cuFFT is linked statically instead of being shipped beside the executable and found through an rpath, so `rugnux` and `jfjoch_viewer` need nothing but an NVIDIA driver, and only to use the GPU. The `.rpm`/`.deb` continue to take cuFFT from the distribution. The developer utilities `jfjoch_extract_hkl` and `jfjoch_recompress` are no longer packaged anywhere. * Jungfraujoch needs six fewer shared libraries on the machine - libopenblas and libmetis, and libgfortran, libquadmath, libgomp and libz behind them - because the Ceres LAPACK, METIS and SuiteSparse back-ends are no longer built. Nothing in the code ever selected them, and results are unchanged. * The PCIe driver DKMS package builds for the kernel it is being installed for instead of the running one, so a module built while a kernel update is being applied loads after the reboot. * The PCIe driver builds on RHEL 9.5 and later, and on their CentOS Stream, Rocky and AlmaLinux equivalents, where the `vm_flags` kernel interface was backported into the 5.14 kernel. * A data collection started with `async_start` that fails to start - a writer refusing to overwrite an existing file, for instance - is reported as an error by `/wait_until_running` and `/wait_till_done` instead of as a timeout and a successful collection respectively. The error message is the one the writer gave. * A calibration that is cancelled or that fails to collect its pedestals is no longer reported as a successful one. The broker goes to `Inactive` with an error message and has to be initialized again, instead of sitting in `Idle` looking ready to measure while holding partial pedestals - data collected in that state was silently mis-converted. * A failed `/initialize` is reported to `/wait_until_running` and `/wait_till_done` as soon as it happens, instead of when their timeout expires. * `space_group_number` accepts space groups up to 230 in the API schema, so cubic space groups can be recorded. The broker always accepted them; the generated clients rejected them before the request was sent. * The results report's `REPORT_VERSION` is 3, two sections having been added. Existing key names and table columns are unchanged. * The merged statistics table has **9** resolution shells instead of 10, which is what XDS reports. The bins were already XDS's - equal steps in 1/d^2 between the lowest- and the highest-resolution reflection the merge kept - so at the same resolution limits the two tables now have the same shell boundaries and can be read row for row. `--resolution-shells` sets a different count. * `rugnux --model` now settles the frame the merged reflections are written in, not only the frame the R-factors and the maps are computed in: the `.mtz`/`.cif`/`.hkl` come out in the model's indexing, and where the data were merged in the model's enantiomorph they take the model's hand and space group - which on anomalous data puts I(+) and I(-) the right way round. The indexing choice is logged with the winning R-free and the runner-up, so a decision made within noise is visible. * `rugnux --model` can resolve the indexing ambiguity of a **serial stills** run, which a model could not do before: structure factors computed from the model become the per-image reference, the same role a reference MTZ plays. It needs the cell and space group up front (`-C` / `-S`). Without one or the other, a merohedral serial run still merges both hands together and says so. * The rugnux documentation opens with a quick start - the default run, and runs with a reference MTZ, with a model, or with the space group and cell pinned - and explains the indexing ambiguity: what it costs on rotation and on serial data, and which of `-z` / `--model` resolves it in each case. The long reference pages now carry a table of contents. Reviewed-on: #74 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-26 22:47:00 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	7d34e8a049	v1.0.0-rc.144 (#54) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M) Reviewed-on: #54 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-05-01 17:06:36 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49	2026-04-29 09:50:50 +02:00
leonarski_fandtakaba_k	230480e390	v1.0.0-rc.138 (#48) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations jfjoch_broker: Goniometer axis name is converted to lowercase jfjoch_broker: Fix bug, where wrong HTTP error codes were returned jfjoch_broker: Improve sigma estimation during merging (K. Takaba) --------- Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch> Reviewed-on: #48 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-27 19:56:14 +02:00
leonarski_f	c981e1b91c	v1.0.0-rc.137 (#46) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Better track time for each operation in the processing stack * jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress) * jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress) * jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0) Reviewed-on: #46	2026-04-25 19:59:21 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-16 11:59:59 +02:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	a0a659a02c	v1.0.0-rc.120 (#27) ... This is an UNSTABLE release. * jfjoch_broker: Improve performance of binary plot export Reviewed-on: #27 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-09 15:21:40 +01:00
leonarski_f	c8bbf8a186	v1.0.0-rc.115 (#22) ... This is an UNSTABLE release and not recommended for production use (please use rc.111 instead). * jfjoch_broker: Default spot finding settings can be configured via config JSON * jfjoch_viewer: FFT analysis of data in the dataset plot Reviewed-on: #22 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-04 11:56:14 +01:00
leonarski_f	8e65e8bf25	v1.0.0-rc.99 (#4) ... This is an UNSTABLE release. jfjoch_broker: Fix output during mask data collection Reviewed-on: #4 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-11 10:40:25 +01:00
leonarski_f	5d81af1c88	2511-eiger-mask-2 (#3) ... This is an UNSTABLE release and not recommended for production use (please use rc.96 instead). * jfjoch_broker: For DECTRIS detectors fix dark data collection during initialization Reviewed-on: #3 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-10 11:42:39 +01:00
leonarski_f	4dbbf0e365	v1.0.0-rc.97 ... This is an UNSTABLE release and not recommended for production use (please use rc.96 instead). * jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask * jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems) * jfjoch_viewer: Add option to handle user pixel mask (experimental) * jfjoch_viewer: More options for ROI * jfjoch_viewer: Add window to display calibration Reviewed-on: #2 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-09 12:42:27 +01:00
leonarski_f	27c4a426a2	1.0.0-rc.86	2025-09-27 12:29:56 +02:00
leonarski_f	c936e9bab7	v1.0.0-rc.74	2025-09-10 12:33:39 +02:00
leonarski_f	dba807fadd	v1.0.0-rc.71	2025-08-28 07:07:01 +02:00
leonarski_f	51cbef4c84	1.0.0-rc.66	2025-07-18 11:42:39 +02:00
leonarski_f	be6d8ad0f5	v1.0.0-rc.64	2025-07-15 09:55:19 +02:00
leonarski_f	8fa8b612bb	v1.0.0-rc.57	2025-07-02 20:04:35 +02:00
leonarski_f	05e162ea5d	v1.0.0-rc.56	2025-07-02 12:40:45 +02:00
leonarski_f	50eaaaaf29	v1.0.0-rc.51	2025-06-22 13:15:10 +02:00
leonarski_f	ab5f502c8e	v1.0.0-rc.45	2025-06-16 12:48:17 +02:00
leonarski_f	b59a03ff02	v1.0.0-rc.44	2025-06-15 17:46:46 +02:00
leonarski_f	80251cc5b8	v1.0.0-rc.43	2025-06-13 16:00:50 +02:00
leonarski_f	41a3e671f4	v1.0.0-rc.41	2025-06-10 18:14:04 +02:00
leonarski_f	53c90ee5d8	v1.0.0-rc.40	2025-05-28 18:49:27 +02:00
leonarski_f	29ecd3515a	patch to 1.0.0-rc.36	2025-05-07 16:24:35 +02:00
leonarski_f	040cf08386	v1.0.0-rc.36	2025-05-05 19:32:22 +02:00
leonarski_f	b0607ab3ca	v1.0.0-rc.34	2025-04-14 11:52:06 +02:00
leonarski_f	ddf4c75645	v1.0.0-rc.31	2025-03-02 13:15:28 +01:00
leonarski_f	7564619574	version 1.0.0-rc.29	2024-12-08 13:26:13 +01:00
leonarski_f	e5a775b4a3	version 1.0.0-rc.28	2024-12-05 16:41:04 +01:00
leonarski_f	b3e745a8dd	version 1.0.0-rc.26	2024-11-26 16:04:38 +01:00
leonarski_f	28d224afab	version 1.0.0-rc.25	2024-11-22 21:25:20 +01:00
leonarski_f	adc13ff33e	version 1.0.0-rc.24	2024-11-17 14:55:09 +01:00
leonarski_f	36e3a59802	version 1.0.0-rc.21	2024-10-23 10:16:37 +02:00
leonarski_f	1d7e5f173d	version 1.0.0-rc.18	2024-10-16 19:52:01 +02:00
leonarski_f	95eaad3d35	version 1.0.0-rc.15	2024-10-08 21:04:09 +02:00
leonarski_f	e812918e2e	version 1.0.0-rc.13	2024-10-05 13:14:49 +02:00
leonarski_f	3035d9e144	v1.0.0_rc.11	2024-06-30 17:48:35 +02:00
leonarski_f	a32c7274a6	Release 1.0.0_rc.9	2024-06-20 11:26:40 +02:00
leonarski_f	953c3fa972	Updates after MAX IV experiment	2024-06-03 10:56:43 +02:00
leonarski_f	3ef89483e8	MAX IV experiment day 2 corrections	2024-05-23 12:15:36 +02:00
leonarski_f	ea667f3313	Small fixes	2024-05-01 20:24:11 +02:00