11 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandjungfrau	4dc2534dbf	v1.0.0.rc-162 (#72) ... **Files written by Jungfraujoch now import correctly in DIALS, XDS and pyFAI.** A tilted detector, a grid scan, a still recorded at a goniometer position, and saturated or unreadable pixels were each described in a way that a third-party program acted on wrongly. If you process Jungfraujoch data outside Jungfraujoch, prefer this release to any earlier one. * HDF5: the detector tilt (`rot1`/`rot2`/`rot3`) is exported correctly in the NXmx transformation chain; untilted geometries are unaffected. * HDF5: a still recorded at a goniometer position is no longer read back as a single image, and a grid scan records a stationary spindle so a program that requires a rotation axis can open it. * HDF5: the sample transformation chain is written in mounting order, with a Smargon head position told apart from the spindle, one entry per image, `module_offset` as a float unit vector, and `offset_units` on every offset. * HDF5: saturated, underloaded and unreadable pixels are described so a downstream program masks them - `saturation_value`, `underload_value`, `error_value` and `bit_depth_readout` are written correctly, and a data file missing next to a VDS master reads as the error marker rather than as zero counts. * HDF5: the rotation axis is read back under whatever name it carries, and `mirror_y` records whether the assembled image is mirrored in Y relative to the detector's raw readout. * A grid scan and a goniometer axis can both be set; they are no longer alternatives. * `images_per_file` is chosen from the acquisition when it is not given: a rotation sweep of at most 20000 images goes into a single data file, a grid scan splits on whole fast-axis rows, and stills and serial keep 1000. * The writer refuses a stream whose start message declares a different pixel format than its images carry, and a DECTRIS detector sending signed images is no longer declared unsigned. * The image stream can carry the sample transformation chain (`transformations`, in the END message); a producer that does not send it gets the same chain built by the writer. * rugnux: fixing the space group with `-S` no longer prevents the lattice from being found - a lattice indexed in a different setting is reindexed into that group's own setting, and a run whose crystal does not have that group's lattice stops and names the cell it indexed as, rather than reporting statistics that cannot describe it. * rugnux: the per-image resolution estimate now predicts the resolution the merged data reach rather than the highest-resolution spot found, and is reported as `SPOT_RESOLUTION_ESTIMATE`. * rugnux: two runs of the same command on the same images produce the same merged intensities; the azimuthal profile written alongside them is not yet reproducible in the same way. * rugnux: the offline lattice refinement is bounded by iterations rather than by a wall clock, so a loaded machine can no longer refine to a different lattice; a live acquisition keeps its real-time bound. * rugnux: the detector-frame modulation correction is fitted on a grid spanning the detector, so whether it is applied no longer depends on how far integration reached. * rugnux: the geometry pre-pass no longer writes `<prefix>_01.mtz`, `_01.cif`, `_01.hkl` and `_01_image.dat`; the refined second pass writes those files under `<prefix>`, and that is the result to use. * rugnux: `_process.h5` describes the pixel format of the images it links to, and is written on a thread of its own. * rugnux: the detector geometry is also logged in XDS's convention (`ORGX`/`ORGY`, detector axis vectors, rotation axis), so it can be compared with an XDS refinement. * rugnux: an image integrated in pyFAI through the `.poni` file written by `--mode calibration` comes out with the correct azimuth, and the file declares pyFAI's `orientation`, which needs pyFAI 2024.01 or newer. Radial integration is unchanged. * rugnux: a rotation run is substantially faster throughout - beam-stop detection, first-pass indexing, geometry refinement, integration, scaling and merging - and observations outside the scaling resolution range are dropped as they are ingested. The refined geometry, the space group chosen and the merged statistics are unchanged. * Faster spot finding and indexing, on the broker as well as in rugnux; the spots found and the lattices indexed are unchanged. * A run reserves substantially less GPU memory: nothing is allocated for buffers that are never read, and a worker builds only the engines it uses. * rugnux: with `-N` left at its default the per-image loop of `--mode mx` uses at most 16 workers per GPU, rather than one per hardware thread; an explicit `-N` is obeyed as given. * CUDA 12 builds now contain device code for Volta, so the RHEL 8 packages and the portable Linux `.tgz` run on a V100; the CUDA 13 artefacts (RHEL 9, Ubuntu, Windows) remain Turing and newer. * The build resolves a single Eigen for the whole project, and refuses to configure if Ceres picks up a different one; a build that mixed two Eigen versions was undefined behaviour and crashed at -O2. * Documentation: a security page, and the supported GPU generations and minimum NVIDIA driver version of every released artefact. **Breaking change to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.162, `frontend/src/client`): * `dataset_settings.images_per_file` is no longer `default: 1000` and no longer accepts `0`; it is optional, and its minimum is 1. A client sending `0` (previously "one file for the whole run") is now rejected - omit the field instead, which for a rotation sweep gives the same single file. * `file_writer_format` now defaults to `NXmxVDS`, matching the server's own default and the layout recommended for DIALS, XDS and CrystFEL. A generated client that fills in schema defaults and does not set the format explicitly will write VDS masters where it previously wrote legacy ones; set `NXmxLegacy` explicitly to keep them. --------- Co-authored-by: jungfrau <jungfrau@mx-aare-test.psi.ch> Reviewed-on: #72 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-25 08:21:39 +02:00
leonarski_f	d760b12a18	v1.0.0-rc.141 (#51) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Azimuthal integration mapping is generated with parallel computations, significantly reducing setup times * frontend: Fix selection of FFTW in indexing settings Reviewed-on: #51 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 13:04:54 +02:00
leonarski_f	239a441ee6	v1.0.0-rc.140 (#50) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: For DECTRIS detectors, ZeroMQ link is persistent, to save time for establishing new connection * jfjoch_broker: Minor bug fixes for rare conditions Reviewed-on: #50	2026-04-29 21:40:22 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49	2026-04-29 09:50:50 +02:00
leonarski_fandtakaba_k	230480e390	v1.0.0-rc.138 (#48) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations jfjoch_broker: Goniometer axis name is converted to lowercase jfjoch_broker: Fix bug, where wrong HTTP error codes were returned jfjoch_broker: Improve sigma estimation during merging (K. Takaba) --------- Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch> Reviewed-on: #48 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-27 19:56:14 +02:00
leonarski_f	6133da1377	v1.0.0-rc.133 ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Use httplib for HTTP server instead of Pistache * jfjoch_broker: Drop OpenSSL support * jfjoch_broker: Base work for multi-lattice support in the future * Update dependencies to more recent versions (spdlog, HDF5, Catch2, httplib) Reviewed-on: #41	2026-03-26 20:50:33 +01:00
leonarski_f	4dbbf0e365	v1.0.0-rc.97 ... This is an UNSTABLE release and not recommended for production use (please use rc.96 instead). * jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask * jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems) * jfjoch_viewer: Add option to handle user pixel mask (experimental) * jfjoch_viewer: More options for ROI * jfjoch_viewer: Add window to display calibration Reviewed-on: #2 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-09 12:42:27 +01:00
leonarski_f	a7c92923ec	Bugfix to rc.75	2025-09-11 09:58:03 +02:00
leonarski_f	e7a89e1209	DectrisSimplonClient: EIGER2 missing min threshold	2025-09-11 09:00:29 +02:00
leonarski_f	29ecd3515a	patch to 1.0.0-rc.36	2025-05-07 16:24:35 +02:00
leonarski_f	040cf08386	v1.0.0-rc.36	2025-05-05 19:32:22 +02:00