Every calibration step signals failure by calling SetState and returning
normally - none of them throws, so none reached the catch in
CalibrateDetector. The unconditional SetState(Idle, "Calibration sequence
done", Success) after the try block then overwrote all of them.
/cancel during a JUNGFRAU pedestal therefore left the broker Idle and
apparently ready to measure while holding a truncated G0 and
default-constructed zeros for G1/G2, and every subsequent run was
silently mis-converted with nothing in /status to show it. The genuine
failures - "Pedestal not collected properly", "Mask not collected
properly" - were hidden the same way.
The steps now return whether they succeeded, and the sequence reports
success only if they all did. A cancellation or a failure leaves the
state Inactive with Error severity rather than Idle or Error: the
calibration is undefined, so the detector has to be initialized again,
which is what Inactive means everywhere else in the machine. The
exception path joins them, since a throw mid-sequence leaves the
calibration no better defined. Cancelled pedestals were already Inactive
but carried Warning severity, which reads as an advisory.
CalibrateJUNGFRAU now abandons the sequence at the first failure instead
of collecting G1 and G2 on top of a G0 that was never measured - the
cancel path already behaved that way - and ConfigureDetector is skipped
when there is no calibration to operate with, a cancelled sequence having
left the detector mid-abort.
Both error paths that end an Initialize now notify the condition
variable. The state has left Busy, but without the notification a client
in /wait_until_running slept out its whole timeout - up to an hour, if it
asked for one - before noticing a failure that had already happened.
Separately, dataset_settings.space_group_number allowed 1..194 in the
OpenAPI schema while the broker accepts 1..230, so every generated
client's validate() rejected all 36 cubic space groups before the request
left. The regenerated clients follow in the version bump.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uwv9ScHtDH6g8tYgfSuApo
An acquisition started with async_start returns from /start before the
measurement thread has run, so a failure there had no caller to raise it
to. MeasurementThread stored it in start_exception, but only the
synchronous branch of Start() ever read it.
The ordinary-failure path - a writer refusing to overwrite an existing
file, say - sets the state to Idle rather than Error, and Idle is what
wait_until_running_post maps to 504 "timeout, need to restart". So the
one case the async workflow exists to report came back as a timeout with
an empty body, and the writer's message was dropped. /wait_till_done was
worse: Idle is its success case, so it answered 200 for a run that never
started. Only a critical detector fault, which leaves the state at Error,
was reported at all.
The wait functions now rethrow start_exception, so both endpoints produce
the same 500 and the same message as a synchronous start.
rethrow_exception does not consume the exception_ptr, so repeated calls
all report the same failure. It is cleared by every entry point that
begins new work - Start (before ImportDatasetSettings, which can throw),
Initialize, Pedestal, LoadDetectorSettings, SetDarkMaskSettings - so a
pending failure is never attributed to the operation after it. The
synchronous branch no longer clears it, so a wait call made after a
failed /start reports the failure rather than an apparent timeout.
wait_until_running_post and wait_till_done_post drop their timeout == 0
special case, which called GetStatus() directly and so bypassed the
rethrow: ?timeout=0 returned 200 from /wait_till_done where ?timeout=1
returned the error. wait_for evaluates the predicate before expiring, so
the state reported is unchanged.
JFJochReceiverService::Start clears the receiver status when the start
fails. JFJochReceiver's constructor sets progress to 0 and a zeroed
status before the throw, and nothing cleared it, so /status reported
Idle with progress 0 - a stalled acquisition, to the frontend - and
/statistics reported an all-zero run that never happened, until the next
start overwrote it. Its catch widens to std::exception, so a
non-JFJochException gets the cleanup and the logging it skipped before.
Nothing else is left dirty by a refused start: the receiver keeps its
null receiver and Idle state, PrepareAction only resets counters (the
FPGA is armed in StartAction, in a thread launched after the start
message goes out), and SendStartMessage precedes every std::async in the
receiver constructor. The test starts four more times afterwards, one of
them a complete acquisition with no re-initialisation in between.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uwv9ScHtDH6g8tYgfSuApo
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice.
* **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster.
* **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory.
* **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again.
**Breaking change to the rugnux command line:**
* `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one.
* `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride.
**Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional:
* `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve.
* `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing.
**Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional:
* The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more.
* `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.**
Reviewed-on: #71
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation.
* jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window.
* rugnux: Accept an absolute `-o` output prefix in offline processing.
* Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed).
* Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`.
* rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling.
* rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics.
* rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1.
* rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group.
* rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix.
* jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation.
* jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning.
* jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint.
* jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed).
* jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types.
* jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails.
* jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak.
* Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation.
* CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output.
* jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling.
* Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool.
* jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection.
* jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata.
* CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing
* jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files
* jfjoch_broker: Add ROI calculation in non-FPGA workflow
* jfjoch_broker: Fixes to TCP image pusher
* jfjoch_broker: Remove NUMA bindings
* jfjoch_broker: Improvements to indexing
* jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values
* jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors
* jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs
* jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results
Reviewed-on: #63
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M)
Reviewed-on: #54
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start`
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start'
* jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time
* jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received
* jfjoch_broker: Use nanoseconds internally for frame/image/readout time
* jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished)
* jfojch_broker: Improve profiling of different data analysis steps
* jfjoch_broker: Record integration reflection count
* jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds)
* jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked
* jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets
**Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time.
Reviewed-on: #49
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time
jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations
jfjoch_broker: Goniometer axis name is converted to lowercase
jfjoch_broker: Fix bug, where wrong HTTP error codes were returned
jfjoch_broker: Improve sigma estimation during merging (K. Takaba)
---------
Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch>
Reviewed-on: #48
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Better track time for each operation in the processing stack
* jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress)
* jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress)
* jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0)
Reviewed-on: #46
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4)
* jfjoch_viewer: Improve image render performance
Reviewed-on: #44
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124.
* jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files)
* jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction
* jfjoch_broker: Image pusher statistics are accessible via the REST interface
* jfjoch_writer: Supports TCP image socket and for these auto-forking option
Reviewed-on: #36
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release.
* jfjoch_broker: Improve performance of binary plot export
Reviewed-on: #27
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.111 instead).
* jfjoch_broker: Default spot finding settings can be configured via config JSON
* jfjoch_viewer: FFT analysis of data in the dataset plot
Reviewed-on: #22
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release.
jfjoch_broker: Fix output during mask data collection
Reviewed-on: #4
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.96 instead).
* jfjoch_broker: For DECTRIS detectors fix dark data collection during initialization
Reviewed-on: #3
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.96 instead).
* jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask
* jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems)
* jfjoch_viewer: Add option to handle user pixel mask (experimental)
* jfjoch_viewer: More options for ROI
* jfjoch_viewer: Add window to display calibration
Reviewed-on: #2
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
leonarski_fandClaude Opus 5
