7 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	6468dd13be	rugnux: --mode, and detector calibration from powder rings ... --azint-only and --scale are replaced by --mode mx|azint|scale|calibration, with mx the default. The old flags are removed rather than aliased. Calibration mode fits the detector geometry - PONI x/y, the two tilts and the distance - to a calibrant's powder rings and writes a pyFAI .poni alongside a report of how far each parameter moved from the header. Bragg data constrain the beam centre worst, because it is gauge-coupled to the crystal orientation; a powder ring has no orientation to couple to. --calibrant takes lab6, agbh, ceo2, si or ice. A calibrant is a list of ring positions rather than a unit cell, because hexagonal ice is P6_3/mmc: rings enumerated from its cell would include systematically absent ones. So the crystalline standards generate their rings from a cell and ice carries the measured list, and RingsFromAzimuthalProfile, GuessGeometry and OptimizeGeometry all take ring q. The calibrant table is shared with the viewer's powder panel, which previously carried its own copy. --calibration picks how the rings are measured: rings (default) sums the (q x azimuth) profile over every processed image and fits the arcs in it; spots pools the found spots and fits those. Both use the whole run, with -s/-e/-t selecting images. rings defaults --azim-phi-bins to 32, since a profile with one azimuthal bin has averaged the ring over every direction and cannot locate it. Two fixes this exposed: The extraction window is capped at half the gap to the neighbouring ring. The background under a peak is taken from the ends of its window, so a window wider than half that gap measures the next ring's flank as this ring's background - and hexagonal ice has three rings within 0.06 1/A. Ice calibration was 3.5 px out before this and 0.29 px after; LaB6 is unaffected. RingOptimizer holds rot1/rot2 fixed when only one ring is present. A tilt and a centre offset both move a ring as cos(phi) and are separated only by the tilt's amplitude growing as the ring radius squared, so on a single ring they are exactly degenerate. Measured. LaB6 at five distances: the fitted direct beam is within 0.36 px of an independent implementation out to 300 mm, and D = -0.046 + 1.000788 dtz with an rms of 0.011 mm. At 500 mm one ring is fully on the detector and a second only clips the corners, which is not enough to constrain a tilt - restricting the q range to the resolved ring recovers 0.06 px. Ice: 5.53 -> 0.29 px on one crystal and 4.71 -> 0.80 px on another, against XDS's refined direct beam. On an ice-free crystal the fit is worse than the header, which is the correct outcome. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-07 10:00:03 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	c49bd2ac3b	v1.0.0-rc.152 (#62) ... * jfjoch_broker: Fix bounds for azimuthal integration for Q spacing (allow Q of 1e-5) * jfjoch_viewer: Adjust Q bounds for azimuthal integration * jfjoch_azint: Add tool to do quick azimuthal integration Reviewed-on: #62	2026-06-17 20:36:24 +02:00
leonarski_f	ddf4c75645	v1.0.0-rc.31	2025-03-02 13:15:28 +01:00
leonarski_f	b3e745a8dd	version 1.0.0-rc.26	2024-11-26 16:04:38 +01:00
leonarski_f	adc13ff33e	version 1.0.0-rc.24	2024-11-17 14:55:09 +01:00