fix: don't set dtz to 108 if missing from spreadsheet

src/aare/daq/daq.py

@@ -1385,55 +1385,6 @@ class AareDAQ:
             )
             return None
 
-    # def _execute_rotation_sequence(self, rotation_request: RotationScanRequest) -> CompletedRotationScan | None:
-    #     """
-    #     Execute rotation scan.
-    #
-    #     Args:
-    #         rotation_request: Rotation scan parameters
-    #
-    #     Returns:
-    #         CompletedRotationScan result or None if failed
-    #     """
-    #     try:
-    #         status= self.status
-    #         if self.__cfg.simulated_detector:
-    #              logger.info("Simulated detector mode enabled; skipping JFJoch start.")
-    #         else:
-    #              self.__jfjoch.measure_rotation(rotation_request, status, self.__cfg.xrf)
-    #
-    #         self.__setup_datacollection(request=rotation_request)
-    #         if self.sample is not None and self.sample.db_id is not None:
-    #             self.__aare.send_sample_event(self.sample.db_id, SampleEventType.COLLECTING)
-    #
-    #         self.__set_state(BeamlineStateEnum.DataCollection)
-    #         result = self.__rotation(rotation_request)
-    #         self.__set_state(BeamlineStateEnum.SampleAlignment)
-    #         if self.sample is not None and self.sample.db_id is not None:
-    #             self.save_screenshot_db(self.sample.db_id, "scan_preview")
-    #             self.__aare.send_sample_event(self.sample.db_id, SampleEventType.COLLECTED)
-    #             self.__aare.ingest_scan(sample=self.sample, result=result.result,
-    #                                     geom=self.sample_geometry, beam_mark_pxl=self.__cfg.get_beam_mark(self.zoom))
-    #         return result
-    #     except JFJochCommunicationError as e:
-    #         logger.error(f"Rotation sequence failed due to JFJoch Communication error: {e}")
-    #         self._handle_operation_error(
-    #             operation=DAQOperation.ROTATION,
-    #             sample=self.sample,
-    #             error=e,
-    #             event_type=SampleEventType.COLLECTIONFAILED,
-    #             additional_comment=f"JFJoch communication error: {e}"
-    #         )
-    #         raise
-    #     except Exception as e:
-    #         logger.error(f"Rotation sequence failed: {e}")
-    #         self._handle_operation_error(
-    #             operation=DAQOperation.ROTATION,
-    #             sample=self.sample,
-    #             error=e,
-    #             event_type=SampleEventType.COLLECTIONFAILED
-    #         )
-    #         raise
 
     def _execute_rotation_sequence(
         self, rotation_request: RotationScanRequest
@@ -1662,8 +1613,6 @@ class AareDAQ:
             new_res = 1 / ((1 / res) + 0.1)
             corrected_dtz = self.diffraction_geometry.calc_dtz_mm(new_res)
             logger.debug(f"corrected dtz: {corrected_dtz}")
-            if corrected_dtz < 108:
-                corrected_dtz = 108
             params.dtz = round(corrected_dtz)
 
         osc = getattr(aaredb_params, "oscillation", None)