motion/ecmc_plugin_fft
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
anderssandstrom
2020-04-08 21:44:50 +02:00
committed by GitHub
parent f552e8269a
commit a76addb177
1 changed files with 11 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
README.md
View File

@@ -42,14 +42,14 @@ Note: If another plugin is loaded in between this will have no affect on these F
## Configuration
The different available configuration settings:
* SOURCE=<source> : Sets source variable for FFT (example: ec0.s1.AI_1). This config is mandatory.
* DBG_PRINT=<1/0> : Enables/disables printouts from plugin, default = disabled.
* NFFT=<nfft> : Data points to collect, default = 4096.
* APPLY_SCALE=<1/0> : Apply scale, default = enabled.
* DC_REMOVE=<1/0> : Remove DC offset of input data (SOURCE), default = disabled.
* ENABLE=<1/0> : Enable data acq. and calcs (can be controlled over asyn), default = disabled.
* MODE=<CONT/TRIGG> : Continious or triggered mode, defaults to TRIGG
* RATE=<rate in hz> : fft data sample rate in hz (must be lower than ecmc rate and (ecmc_rate/fft_rate)=integer), default = ecmc rate.
* SOURCE= source variable : Sets source variable for FFT (example: ec0.s1.AI_1). This config is mandatory.
* DBG_PRINT=1/0 : Enables/disables printouts from plugin, default = disabled.
* NFFT= nfft : Data points to collect, default = 4096.
* APPLY_SCALE=1/0 : Apply scale, default = enabled.
* DC_REMOVE=1/0 : Remove DC offset of input data (SOURCE), default = disabled.
* ENABLE=1/0 : Enable data acq. and calcs (can be controlled over asyn), default = disabled.
* MODE=CONT/TRIGG : Continious or triggered mode, defaults to TRIGG
* RATE=rate in hz : fft data sample rate in hz (must be lower than ecmc rate and (ecmc_rate/fft_rate)=integer), default = ecmc rate.
Example configuration string:
```
@@ -137,11 +137,12 @@ Exmaple: Mode triggered
### RATE
Sets the sample rate of the raw input data (from data source). The default value is the ecmc rate for that data source.
Note: only a lower and "integer" division of sample rate can be defined.
Exmaple: Rate = 100Hz
```
RATE=100;MODE=TRIGG;ENABLE=1;DC_REMOVE=1;APPLY_SCALE=1;NFFT=1024;DBG_PRINT=0;SOURCE=ax1.actpos;"
```
bMeasurese
## EPICS records
Each FFT plugin object will create a new asynportdriver-port named "PLUGIN.FFT<index>" (index is explaine above).
The reason for a dedicated asynport is to influence ecmc as little as possible.
@@ -156,7 +157,7 @@ The plugin contains a template file that will make most information availbe from
* Trigger cmd (rw)
* NFFT (ro)
The available records from this template file can bMeasurese listed by the cmd:
The available records from this template file can be listed by the cmd:
```
dbgrep *FFT*
```