68 lines
2.3 KiB
Plaintext
68 lines
2.3 KiB
Plaintext
##############################################################################
|
|
## test config for ecmc_plugin_daq
|
|
##
|
|
## In this config the interface to safety system is liked to simulated ethercat entries:
|
|
## * To allow motion:
|
|
## caput c6025a:m0s013-Zero 3
|
|
## * To simulate interlock from safety system:
|
|
## caput c6025a:m0s013-Zero 0
|
|
##
|
|
## Monitor status with:
|
|
## camon c6025a:SS1-first-Err c6025a:SS1-first-RmpDwnCmdAct c6025a:SS1-first-AxsStndStllAct
|
|
##
|
|
|
|
epicsEnvSet(IOC,c6025a)
|
|
require ecmccfg "ENG_MODE=1"
|
|
|
|
##############################################################################
|
|
## Load components lib
|
|
#
|
|
require ecmccomp
|
|
|
|
##############################################################################
|
|
## Configure hardware
|
|
|
|
epicsEnvSet("DRV_SLAVE", "13")
|
|
${SCRIPTEXEC} ${ecmccfg_DIR}addSlave.cmd, "SLAVE_ID=$(DRV_SLAVE), HW_DESC=EL7041-0052"
|
|
${SCRIPTEXEC} ${ecmccomp_DIR}applyComponent.cmd "COMP=Motor-Generic-2Phase-Stepper,MACROS='I_STDBY_MA=200,I_MAX_MA=1000,R_COIL_MOHM=1700'"
|
|
|
|
epicsEnvSet("ENC_SLAVE", "14")
|
|
${SCRIPTEXEC} ${ecmccfg_DIR}addSlave.cmd, "SLAVE_ID=$(ENC_SLAVE), HW_DESC=EL5042"
|
|
${SCRIPTEXEC} ${ecmccomp_DIR}applyComponent.cmd "COMP=Encoder-RLS-LA11-24bit-BISS-C"
|
|
|
|
#Apply hardware configuration
|
|
ecmcConfigOrDie "Cfg.EcApplyConfig(1)"
|
|
|
|
##############################################################################
|
|
## AXIS 1
|
|
#
|
|
epicsEnvSet("DEV", "$(IOC)")
|
|
epicsEnvSet("PLC_PATH", "/ioc/c6025a5a/ecmccfg/examples/test/ecmccomp/plc/")
|
|
${SCRIPTEXEC} ${ECMC_CONFIG_ROOT}loadYamlAxis.cmd, "FILE=./cfg/axis.yaml,LIMIT=1000,TYPE=0"
|
|
|
|
##############################################################################
|
|
## Load daq plugin
|
|
#
|
|
require ecmc_plugin_daq "PLUGIN_ID=0"
|
|
|
|
ecmcAddDAQArray("test",PLUGIN.DAQ.test)
|
|
ecmcAddDAQChannel(123)
|
|
ecmcAddDAQItem(ec0.s13.positionActual01,0)
|
|
ecmcAddDAQItem(ax1.enc.posact,0)
|
|
|
|
|
|
##############################################################################
|
|
## Configure diagnostics:
|
|
#
|
|
ecmcConfigOrDie "Cfg.EcSetDiagnostics(1)"
|
|
ecmcConfigOrDie "Cfg.EcEnablePrintouts(0)"
|
|
ecmcConfigOrDie "Cfg.EcSetDomainFailedCyclesLimit(100)"
|
|
ecmcConfigOrDie "Cfg.SetDiagAxisIndex(1)"
|
|
ecmcConfigOrDie "Cfg.SetDiagAxisFreq(2)"
|
|
ecmcConfigOrDie "Cfg.SetDiagAxisEnable(0)"
|
|
|
|
##############################################################################
|
|
## go active
|
|
#
|
|
$(SCRIPTEXEC) ($(ecmccfg_DIR)setAppMode.cmd)
|