Use ecmc 9.5.0

Db/ecmcPluginDAQ_chX-itmX.template

@@ -0,0 +1,4 @@
+record(stringin,"$(P)DAQ-${Name}-CH${CH}-${ITEM}-Info") {
+    field(DESC, "${DESC=empty}")
+    field(VAL,  "${VAL=empty}")
+}

Db/ecmcPluginDAQ_chX.template

@@ -0,0 +1,4 @@
+record(ai,"$(P)DAQ-${Name}-CH${CH}-Type") {
+    field(DESC, "${DESC=}")
+    field(VAL,  "${TYPE=0}")
+}

GNUmakefile

@@ -16,7 +16,7 @@ OPT_CXXFLAGS_YES = -O3
 
 # dependencies
 ECmasterECMC_VERSION = v1.1.0
-ecmc_VERSION = 9.4.0
+ecmc_VERSION = 9.5.0
 
 BASE_DIR = .
 SRC_DIR = $(BASE_DIR)/src

README.md

@@ -60,7 +60,7 @@ ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1234"
 
 ### Adding a data item the a channel
 
-Add a channel to the last created array with ecmcDAQAddDataItem.cmd. The command takes two parameters:
+Add a channel to the last created array with ecmcDAQAddDataItem.cmd. The command takes three parameters:
 1. PARAM  : Parameter name to specify the data to read from ecmc, ec0.s1.analogInput01, ax1.poserr,...
 2. FORMAT : Optional formatting of data:
 ```
@@ -71,6 +71,9 @@ Add a channel to the last created array with ecmcDAQAddDataItem.cmd. The command
                                        The calculated time then would correspond to the first data in the array recived.
        3 = time_ns_minus_period      : Time: Raw value minus one period.
 ```
+3. SEND_OLD : Optional to send old data (for scalars from previosu cycle, for arrays just one element shift) 
+
+
 ### Finalizing a array
 When the configurations for an array is finalized then the ecmcDAQFinalizeArray.cmd must be called.
 The command will read the total array size (header plus data) from the plugin and then load the database with the waveform record (with correct NELM). The command takes the array name as a parameter ("NAME").

iocsh/edwin_test.script

@@ -49,35 +49,35 @@ epicsEnvSet(NAME,ToEdwin) # PREFIX:DAQ-ToEdwin-DataAct
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddArray.cmd,        "NAME=${NAME}"
 
 #- EL5021: Incremental sin/cos 1vpp
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=10"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=10,DESC='Sin/Cos 1VPP'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s1.positionActual01"
 
 #- EL5112: Incremental (treat as array, but same timestamp twice, the second actualy not used)
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1001"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1001,DESC='Incremental'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s2.timestamp01, FORMAT=1"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s2.timestamp01, FORMAT=1, SEND_OLD=1"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s2.positionActual01"
 
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=11"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=11,DESC='Incremental'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s2.positionActual01"
 
 #- EL5042: BISS-C ch 01
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=12"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=12,DESC='BISS-C'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s3.positionActual01"
 
 #- EL5101-0011: Incremental oversampling 
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1000"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1000,DESC='Incremental Oversampling'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s4.nextSyncTime, FORMAT=2"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s4.nextSyncTime, FORMAT=1"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s4.mm.positionActualArray01"
 
 #- EL1252-0050: timestamped input ch 01
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1,DESC='Timestamped input 5V'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s6.timestampLatchPositive01 ,FORMAT=1"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s6.timestampLatchNegative01 ,FORMAT=1"
 
 #- ELM3602-0002: Analog input ch 01
-${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1000"
+${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddChannel.cmd,      "TYPE=1000,DESC='Analog input +-10V'"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s7.timestamp01, FORMAT=2"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s7.timestamp01, FORMAT=1"
 ${SCRIPTEXEC} ${ecmc_plugin_daq_DIR}ecmcDAQAddDataItem.cmd,     "PARAM=ec0.s7.mm.analogInputArray01"

scripts/ecmcDAQAddArray.cmd

@@ -17,3 +17,4 @@
 
 #-               Name  , Asyn port name
 ecmcDAQAddArray(${NAME},ECMC.PLUGIN.DAQ.${NAME})
+epicsEnvSet(ECMC_DAQ_CURR_CH,-1)

scripts/ecmcDAQAddChannel.cmd

@@ -12,7 +12,12 @@
 #-
 #- Arguments
 #- TYPE : Type (number of data type)
+#- NAME : Name of DAQ array object
+#- DESC : Optional description of channel
 #-
 #-################################################################################
 
 ecmcDAQAddChannel(${TYPE})
+epicsEnvSet(ECMC_DAQ_CURR_ITM,-1)
+ecmcEpicsEnvSetCalc("ECMC_DAQ_CURR_CH" ,${ECMC_DAQ_CURR_CH=-1}+1,"%02d")
+dbLoadRecords(ecmcPluginDAQ_chX.template,"P=${ECMC_PREFIX},Name=${NAME},PORT=ECMC.PLUGIN.DAQ.${NAME},CH=${ECMC_DAQ_CURR_CH=00},TYPE=${TYPE=0},DESC=${DESC=}")

scripts/ecmcDAQAddDataItem.cmd

@@ -20,7 +20,10 @@
 #-                                         The calculated time then would correspond to the first data in the array recived.\n");
 #-         3 = time_ns_minus_period      : Time: Raw value minus one period.\n");
 #- SEND_OLD : 1 = Send one element old data (for scalars from last cycle, for arrays shift one element), defaults to 0 (send fresh data)
+#- NAME : Name of DAQ array object
 #-
 #-################################################################################
 
 ecmcDAQAddItem(${PARAM},${FORMAT=0},${SEND_OLD=0})
+ecmcEpicsEnvSetCalc("ECMC_DAQ_CURR_ITM" ,${ECMC_DAQ_CURR_ITM=-1}+1,"%02d")
+dbLoadRecords(ecmcPluginDAQ_chX-itmX.template,"P=${ECMC_PREFIX},Name=${NAME},PORT=ECMC.PLUGIN.DAQ.${NAME},CH=${ECMC_DAQ_CURR_CH=00},ITEM=${ECMC_DAQ_CURR_ITM=00},VAL=${PARAM=empty},DESC='FORMAT=${FORMAT=0},SEND_OLD=${SEND_OLD=0}'")

scripts/ecmcDAQFinalizeArray.cmd

@@ -26,3 +26,5 @@ ecmcEndIf()
 
 dbLoadRecords(ecmcPluginDAQ.template,"P=${ECMC_PREFIX},Name=${NAME},NELM=${DAQ_NELM},PORT=ECMC.PLUGIN.DAQ.${NAME}")
 epicsEnvUnset(DAQ_NELM)
+epicsEnvUnset(ECMC_DAQ_CURR_CH)
+epicsEnvUnset(ECMC_DAQ_CURR_ITM)

src/ecmcPluginDAQ.c

@@ -53,10 +53,11 @@ int daqConstruct(char *configStr)
  **/
 void daqDestruct(void)
 {
-  deleteAllDAQs();
-  if(lastConfStr){
-    free(lastConfStr);
-  }
+  // Segfaults here during destruction?! need to check..
+  //deleteAllDAQs();
+  //if(lastConfStr){
+  //  free(lastConfStr);
+  //}
 }
 
 /** Optional function.