menzel

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 20:31:28 +02:00

78f012f955 debug: refuse to read a mechanism out of loop checkpoints

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 20:21:50 +02:00

796652c278 debug: trace a single line, to name the end-of-line mechanism

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 12:27:26 +02:00

8007a8c8ea debug: recover the scan command from the file itself

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 12:24:02 +02:00

f0f8f620de debug: report the achieved geometry, and catch stalls that keep a full span

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 12:14:33 +02:00

95409036bb debug: measure lines against the slow axis, and stop hiding the MCS

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 12:09:34 +02:00

1b99ffeee9 debug: analyse the scan grid, the real motor, and where faults cluster

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 11:56:05 +02:00

52fed5a008 debug: --list shows per-point arrays first, not scalar configuration

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 10:09:33 +02:00

e53f59a0f1 debug: recover the scan geometry from the data, not from metadata

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 09:59:07 +02:00

90358f5222 debug: make the scan check work out its own geometry, or say why it cannot

menzel created branch debug/scan-artefacts in bec/csaxs_bec

2026-08-25 09:24:28 +02:00

menzel pushed to debug/scan-artefacts at bec/csaxs_bec

2026-08-25 09:24:28 +02:00

a5035d91cb debug: add a desk check for the July 2026 scan artefacts

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-18 11:57:21 +02:00

7ecbf1147d fix(canon): act on the Stage 4.5/5/6 results -- jog is dead, presets confirmed

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-18 11:41:03 +02:00

a1ddb64e9f feat(canon): fold jog, focus modes and presets into one guarded tool

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-18 08:44:15 +02:00

5d6f2374ff fix(canon): make stop() actually stop -- it was a silent no-op on hardware

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-18 08:36:34 +02:00

aacc9e659b feat(canon): verify stop() actually halts an axis before trusting it (R9)

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-17 20:25:40 +02:00

45b5ecb77d feat(canon): add a guarded Stage 4 motion tool

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-17 20:07:19 +02:00

4909ade262 fix(canon): pace polling on a deadline, and stop overstating grab latency

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-17 19:56:19 +02:00

08cf0349bd fix(canon): query info.cgi without the session; drop mjpeg; add Stage 7 check

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-17 19:19:58 +02:00

327bfaf5ff feat(canon): replace the protocol guesses with the measured CR-N300 tables

menzel pushed to feat/canon_crn300 at bec/csaxs_bec

2026-08-17 19:03:13 +02:00

6f6cd153a3 fix(canon): parse the CR-N300 wire format as measured against hardware