- Added a multicountsersec to teplace hmcontrol and multicounter
- Fixed a case sensitivity bug in haddcheck
- Made oscillate work with second generation motors for POLDI
- Added a time stamper to trace. Now there will be time stamps in trace files which allow
to correlate things from the master log with the trace.
- Updated polterwrite.
- Updated testprot to work with the behave test
- In support of HMsec, allow the count command in countsec to run without a
preset parameter. If this is missing the old, stored preset is used.
- Removed a check which causes initialisation of the HM from a batch file fail
for POLDI
- fixed @nl@ encoding of \n problem with certain kinds of batch files generated by GTSE
- Fixed a bug with summing on hitsmemsec. nxdataset now uses 64 bit int for dimensions.
- Fixed motorsec to remove itself properly from a parent when linked. Please note
that there is still the limitation that a second generation motor can only be linked
once in a Hipadaba tree
- Extended subsampling a HM for second generation HM
- Added a hscriptnotify. This calls a script on the update of a node
- POLDI has been rebuilt, chnages to data file writing
- For testing, sinqhttopt now understands a special command, byteswapoff,
which switches off byte swapping. Required when the HM ius run on an Intel box.
- Added error fields to hwardware objects: motor, counter, histmem
- Optimised sinqhttpopt
- Added haddcheck which adds checks to hipadaba nodes. The current implementation
only checks for selctions agaisnt the values property. Expand when more checks are
required.
- Fixed some issues with error returns not being properly handled in devexec
- Fixed a bug in motorlist which caused limit checks to fail
- Fixed an issue with the TDCHM not properly updating the counter
values on finish
- Readded getHipadabaPar in ChainCallback as this caused a problem in ei
- Made tasdrive ignore sgu, sgl when out of plane not allowed
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
- Extended confvirtmot to have a checkscript
- Made sure that targets get updated when calling tasdrive
- Fixed some output codes in tasdrive.c
- Made tdchm invoke counters event message for Melone
- Fixed the ConID inefficiency by caching the host name in asynnet.c
- Added a traceActive function to trace
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
