- added is_running to driveable ease objects
- ighdriv.c: try <maxtry> times when status reply failes
- ipsdriv.c: fix trainedTo parameter
- reduced SEA version of SICS
a server hangs up diretcly after a message.
- Some output was suppressed while tracing, fixed
- Make ready to compile both with Ubuntu 32 and 64 or /usr/local
based ON in general. Just in psi/makefile_linux the top include has
to be adapted
- Removed epics drivers from SICS. Still in source to be reenabled when
needed
- Added FindMotor
- Added sput, sappend and slab to nxscript using the new sicsget module
- Fix to sget to fix the "mot softzero" problem
- Added a multicountsersec to teplace hmcontrol and multicounter
- Fixed a case sensitivity bug in haddcheck
- Made oscillate work with second generation motors for POLDI
- Added a time stamper to trace. Now there will be time stamps in trace files which allow
to correlate things from the master log with the trace.
- Updated polterwrite.
- Updated testprot to work with the behave test
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
drivable. Required a new event in devexec.c
- Fixed the phytron driver to handle speed well
- Added a protocol driver for the TCP/IP bridge to the SLS magnets
- poldizug now sends all codes all the time
- polterwrite writes the filename again
- sanswave has been modifed to support the new second generation velocity
selector
- sinqhttprot has been mdified to copy data to nodes, this for the second
generation HM object
- tasscan suppressed some output
