d7cea6914c
You can now run the oscillating collimator for a specified number of cycles. A MOTEND event is now sent when the oscillator stops. Also temporarily set status to eEager to allow changing the motor accesscode parameter while something else is running, (eg a counter) motor.c finishDriving is no longer static so we can call it from the oscilator and generate a MOTEND event. west4100.c Return 'success' from wrapper on "controlsensor" and "sensorlist" queries so we can test and capture their values in scripts. Makefile Compile the quokka beamstopaction object site_ansto.c Add the MakeActionObject command. Currently only makes the hardcoded beamstopaction object obpar.c Report object name and parameter on an illegal attempt to set a parameter hmm_configuration_common_1.tcl Add oscillating collimator control flag for Wombat. If true we use hmm to start the histogram server instead of hmc. TODO remove hmc and always use hmm. hipd/config/motors/motor_configuration.tcl Don't load anticollider config twice. Fix oct limits wombat_configuration.tcl Environment configuration must be loaded before running server_init. hrpd/config/hmm/hmm_configuration.tcl Fix default time-bin to match 10Hz frame frequency hrpd/config/motors/motor_configuration.tcl Added dummy motor for testing. reflectometer/config/hmm/detector.tcl Fill in dhv1 configuration parameters. sans/config/hmm/detector.tcl Enable detector voltage control sans/config/hmm/hmm_configuration.tcl SICS-227 set default resolution to 192x192 sans/config/motors/motor_configuration.tcl Added dummy motor for testing quokka parameters.tcl Fix L2mm calculation, Fix SICS-228 users cannot set rotapdeg beamstopaction.[ch] NEW: Implements an action command to drive the quokka beamstops up and down. r2670 | ffr | 2008-08-07 13:17:29 +1000 (Thu, 07 Aug 2008) | 53 lines
79 lines
2.4 KiB
Tcl
79 lines
2.4 KiB
Tcl
source $cfPath(hmm)/hmm_configuration_common_1.tcl
|
|
source $cfPath(hmm)/hmm_cylindrical_detector_configuration.tcl
|
|
set sim_mode [SplitReply [hmm_simulation]]
|
|
|
|
proc ::histogram_memory::init_OAT_TABLE {} {
|
|
if [ catch {
|
|
# We don't need a MAX_CHAN parameter for time because the time channel
|
|
# is scaled by calling the ::histogram_memory::clock_scale function
|
|
OAT_TABLE X -setdata MAX_CHAN 128
|
|
OAT_TABLE Y -setdata MAX_CHAN 512
|
|
OAT_TABLE X -setdata BMIN -0.5
|
|
OAT_TABLE X -setdata BMAX 127.5
|
|
OAT_TABLE Y -setdata BMIN -0.5
|
|
OAT_TABLE Y -setdata BMAX 511.5
|
|
|
|
OAT_TABLE -set X { 127.5 126.5 } NXC 128 Y { -0.5 3.5 } NYC 128 T { 0 100000 } NTC 1
|
|
} message ] {
|
|
if {$::errorCode=="NONE"} {return $message}
|
|
return -code error $message
|
|
}
|
|
}
|
|
proc ::histogram_memory::init_SAT_TABLE {} {
|
|
if [ catch {
|
|
SAT_TABLE -set APPLY ENABLE MIDPOINT 480 DIRECTION X SWAP ENABLE WRAP ENABLE
|
|
} message ] {
|
|
if {$::errorCode=="NONE"} {return $message}
|
|
return -code error $message
|
|
}
|
|
}
|
|
|
|
##
|
|
# @brief Return the detector position
|
|
proc ::histogram_memory::detector_posn_degrees {} {
|
|
return [SplitReply [stth]]
|
|
}
|
|
proc ::histogram_memory::pre_count {} {}
|
|
proc ::histogram_memory::post_count {} {}
|
|
proc ::histogram_memory::isc_initialize {} {
|
|
|
|
if [ catch {
|
|
::histogram_memory::init_hmm_objs
|
|
if {$::sim_mode == "true"} {
|
|
hmm configure oat_ntc_eff 1
|
|
hmm configure oat_nyc_eff 1024
|
|
hmm configure oat_nxc_eff 64
|
|
}
|
|
BAT_TABLE -init
|
|
CAT_TABLE -init
|
|
SAT_TABLE -init
|
|
OAT_TABLE -init
|
|
FAT_TABLE -init
|
|
::histogram_memory::ic_initialize
|
|
::histogram_memory::two_theta -boundaries
|
|
|
|
detector_active_height_mm 335
|
|
detector_active_width_mm 3463.4
|
|
detector_radius_mm 1250.0
|
|
|
|
# hmm configure FAT_SIMULATED_EVENT_Y0 $y_bb0
|
|
# hmm configure FAT_SIMULATED_EVENT_Y1 $ybbmax
|
|
# hmm configure FAT_SIMULATED_EVENT_X0 $x_bb0
|
|
# hmm configure FAT_SIMULATED_EVENT_X1 $xbbmax
|
|
::histogram_memory::init_OAT_TABLE
|
|
::histogram_memory::init_SAT_TABLE
|
|
::histogram_memory::upload_config Filler_defaults
|
|
|
|
::nexus::data alias ::histogram_memory::vertical_axis ::histogram_memory::y_pixel_offset
|
|
::nexus::data alias ::histogram_memory::horizontal_axis ::histogram_memory::two_theta
|
|
} message ] {
|
|
if {$::errorCode=="NONE"} {return $message}
|
|
return -code error $message
|
|
}
|
|
}
|
|
|
|
proc histmem {cmd args} {
|
|
eval "_histmem $cmd $args"
|
|
}
|
|
publish histmem user
|