d7cea6914c
You can now run the oscillating collimator for a specified number of cycles. A MOTEND event is now sent when the oscillator stops. Also temporarily set status to eEager to allow changing the motor accesscode parameter while something else is running, (eg a counter) motor.c finishDriving is no longer static so we can call it from the oscilator and generate a MOTEND event. west4100.c Return 'success' from wrapper on "controlsensor" and "sensorlist" queries so we can test and capture their values in scripts. Makefile Compile the quokka beamstopaction object site_ansto.c Add the MakeActionObject command. Currently only makes the hardcoded beamstopaction object obpar.c Report object name and parameter on an illegal attempt to set a parameter hmm_configuration_common_1.tcl Add oscillating collimator control flag for Wombat. If true we use hmm to start the histogram server instead of hmc. TODO remove hmc and always use hmm. hipd/config/motors/motor_configuration.tcl Don't load anticollider config twice. Fix oct limits wombat_configuration.tcl Environment configuration must be loaded before running server_init. hrpd/config/hmm/hmm_configuration.tcl Fix default time-bin to match 10Hz frame frequency hrpd/config/motors/motor_configuration.tcl Added dummy motor for testing. reflectometer/config/hmm/detector.tcl Fill in dhv1 configuration parameters. sans/config/hmm/detector.tcl Enable detector voltage control sans/config/hmm/hmm_configuration.tcl SICS-227 set default resolution to 192x192 sans/config/motors/motor_configuration.tcl Added dummy motor for testing quokka parameters.tcl Fix L2mm calculation, Fix SICS-228 users cannot set rotapdeg beamstopaction.[ch] NEW: Implements an action command to drive the quokka beamstops up and down. r2670 | ffr | 2008-08-07 13:17:29 +1000 (Thu, 07 Aug 2008) | 53 lines