did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
SKIPPED:
psi/amorstat.c
psi/make_gen
psi/makefile_linux
psi/polterwrite.c
psi/sinq.c
psi/sinqhttp.c
psi/sinqhttpprot.c
psi/sps.c
psi/tdchm.c
- Fixed a stack overrun bug in macro.c
- Fixed a killing bug in devser.c
- Added node writing with offset to nxscript.c
- Wrote a simulation driver for second generation HM's
- Readded devexec commands to SICS
- Readded Hipadaba initialisation to SICS
- Fixed a bug in sinqhttprot.c which is triggered when a reconnect happens
during a node based download of data.
SKIPPED:
psi/sinqhttpprot.c
- Added a drivable adapter to scriptcontext nodes
- Added subsampling to simulated histograms (and as a general option) in
order to support Gumtree testing.
- Fixed a bug in hmdata.c
- Fixed an issue with tempoerature writing through RemObjects in mesure
- Added auxiliary reflections to tasub
- Make maximize use soft motor positions
a connection during an active run.
- Added an additional output mode for the connection in order to
support the batch run editor.
- Made clientput send everything with eWarning mode in order to support
the batch run editor.
- Added a better NetReadTillTerm
- Fixed a problem in synchronize.c
- Fixed an issue with reading empty line on normal connection sockets.
- Added a psi scan mode to mesure.c for TRICS
- Made motor print warnings when trying to reposition.
- Fixed abug in hkl.c which cause wrong signs.
SKIPPED:
psi/el734driv.c
psi/el734hp.c
psi/el737driv.c
psi/el737hpdriv.c
psi/nextrics.c
psi/nxamor.c
psi/psi.c
psi/slsmagnet.c
psi/swmotor2.c
psi/tasscan.c
psi/tasutil.c
- Introduced a help system
- introduced a module for handling automatic updates of files during
long measurements
- Added a circular buffer and handling facilities to varlog
- Upgraded documentation
SKIPPED:
psi/faverage.h
psi/nxamor.tex
psi/pimotor.h
psi/pimotor.tex
- Fixed synchronisation issues
- Fixed hsitogram memory writing from nxscript
- Started module for writing SICS interfaces in Tcl
- Fixed a bug in scan, which allowed to corrupt files
- Fixed memory problems in napi5
required inclusion of a matrix package.
- modified counter error handling to send a Stop when the _BAD_BUSY
error is received.
- added an environment interface to the general controller stuff in choco.*
Also added setting a parameter directly at the controller object.
- Added a driver for the ETH High Temperature Furnace to be used at
SANS.
