did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
SKIPPED:
psi/cnvrt.c
psi/cnvrt.h
psi/el734hp.c
psi/make_gen
psi/sinqhttpopt.c
psi/sinqhttpprot.c
psi/spss7.c
psi/swmotor.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
SKIPPED:
psi/amorstat.c
psi/make_gen
psi/makefile_linux
psi/polterwrite.c
psi/sinq.c
psi/sinqhttp.c
psi/sinqhttpprot.c
psi/sps.c
psi/tdchm.c
- Mended tasdrive to drive energy even if Q is askew
- Fixed QM values
- Fixed problems in mesure: om2th, wrong theta selection
- Fixed core dump when driving h,kl, failed
