oscillate.c SICS-232

You can now run the oscillating collimator for a specified number of cycles.
A MOTEND event is now sent when the oscillator stops.
Also temporarily set status to eEager to allow changing the motor accesscode parameter while something else is running, (eg a counter)

motor.c
finishDriving is no longer static so we can call it from the oscilator and generate a MOTEND event.

west4100.c
Return 'success' from wrapper on "controlsensor" and "sensorlist" queries so we can test and capture their values in scripts.

Makefile
Compile the quokka beamstopaction object

site_ansto.c
Add the MakeActionObject command.  Currently only makes the hardcoded beamstopaction object

obpar.c
Report object name and parameter on an illegal attempt to set a parameter

hmm_configuration_common_1.tcl
Add oscillating collimator control flag for Wombat.  If true we use hmm to start the histogram server instead of hmc.  TODO remove hmc and always use hmm.

hipd/config/motors/motor_configuration.tcl
Don't load anticollider config twice.  Fix oct limits

wombat_configuration.tcl
Environment configuration must be loaded before running server_init.

hrpd/config/hmm/hmm_configuration.tcl
Fix default time-bin to match 10Hz frame frequency

hrpd/config/motors/motor_configuration.tcl
Added dummy motor for testing.

reflectometer/config/hmm/detector.tcl
Fill in dhv1 configuration parameters.

sans/config/hmm/detector.tcl
Enable detector voltage control

sans/config/hmm/hmm_configuration.tcl
SICS-227 set default resolution to 192x192

sans/config/motors/motor_configuration.tcl
Added dummy motor for testing

quokka parameters.tcl
Fix L2mm calculation, Fix SICS-228 users cannot set rotapdeg

beamstopaction.[ch]
NEW: Implements an action command to drive the quokka beamstops up and down.

r2670 | ffr | 2008-08-07 13:17:29 +1000 (Thu, 07 Aug 2008) | 53 lines

obpar.c

@@ -184,7 +184,7 @@
      eStat = GetStatus();
      if(!((eStat == eEager) || (eStat == eBatch)) )
      {
-        sprintf(pBueffel,"ERROR: Cannot change parameter while running");
+        sprintf(pBueffel,"ERROR: Cannot change %s.%s parameter while running", obname, name);
         SCWrite(pCon, pBueffel,eError);
         return 0;
      }